diff options
Diffstat (limited to 'Documentation/cgroup-v1/blkio-controller.txt')
| -rw-r--r-- | Documentation/cgroup-v1/blkio-controller.txt | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/Documentation/cgroup-v1/blkio-controller.txt b/Documentation/cgroup-v1/blkio-controller.txt new file mode 100644 index 000000000..673dc34d3 --- /dev/null +++ b/Documentation/cgroup-v1/blkio-controller.txt @@ -0,0 +1,375 @@ + Block IO Controller + =================== +Overview +======== +cgroup subsys "blkio" implements the block io controller. There seems to be +a need of various kinds of IO control policies (like proportional BW, max BW) +both at leaf nodes as well as at intermediate nodes in a storage hierarchy. +Plan is to use the same cgroup based management interface for blkio controller +and based on user options switch IO policies in the background. + +Currently two IO control policies are implemented. First one is proportional +weight time based division of disk policy. It is implemented in CFQ. Hence +this policy takes effect only on leaf nodes when CFQ is being used. The second +one is throttling policy which can be used to specify upper IO rate limits +on devices. This policy is implemented in generic block layer and can be +used on leaf nodes as well as higher level logical devices like device mapper. + +HOWTO +===== +Proportional Weight division of bandwidth +----------------------------------------- +You can do a very simple testing of running two dd threads in two different +cgroups. Here is what you can do. + +- Enable Block IO controller + CONFIG_BLK_CGROUP=y + +- Enable group scheduling in CFQ + CONFIG_CFQ_GROUP_IOSCHED=y + +- Compile and boot into kernel and mount IO controller (blkio); see + cgroups.txt, Why are cgroups needed?. + + mount -t tmpfs cgroup_root /sys/fs/cgroup + mkdir /sys/fs/cgroup/blkio + mount -t cgroup -o blkio none /sys/fs/cgroup/blkio + +- Create two cgroups + mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2 + +- Set weights of group test1 and test2 + echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight + echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight + +- Create two same size files (say 512MB each) on same disk (file1, file2) and + launch two dd threads in different cgroup to read those files. + + sync + echo 3 > /proc/sys/vm/drop_caches + + dd if=/mnt/sdb/zerofile1 of=/dev/null & + echo $! > /sys/fs/cgroup/blkio/test1/tasks + cat /sys/fs/cgroup/blkio/test1/tasks + + dd if=/mnt/sdb/zerofile2 of=/dev/null & + echo $! > /sys/fs/cgroup/blkio/test2/tasks + cat /sys/fs/cgroup/blkio/test2/tasks + +- At macro level, first dd should finish first. To get more precise data, keep + on looking at (with the help of script), at blkio.disk_time and + blkio.disk_sectors files of both test1 and test2 groups. This will tell how + much disk time (in milliseconds), each group got and how many sectors each + group dispatched to the disk. We provide fairness in terms of disk time, so + ideally io.disk_time of cgroups should be in proportion to the weight. + +Throttling/Upper Limit policy +----------------------------- +- Enable Block IO controller + CONFIG_BLK_CGROUP=y + +- Enable throttling in block layer + CONFIG_BLK_DEV_THROTTLING=y + +- Mount blkio controller (see cgroups.txt, Why are cgroups needed?) + mount -t cgroup -o blkio none /sys/fs/cgroup/blkio + +- Specify a bandwidth rate on particular device for root group. The format + for policy is "<major>:<minor> <bytes_per_second>". + + echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device + + Above will put a limit of 1MB/second on reads happening for root group + on device having major/minor number 8:16. + +- Run dd to read a file and see if rate is throttled to 1MB/s or not. + + # dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024 + 1024+0 records in + 1024+0 records out + 4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s + + Limits for writes can be put using blkio.throttle.write_bps_device file. + +Hierarchical Cgroups +==================== + +Both CFQ and throttling implement hierarchy support; however, +throttling's hierarchy support is enabled iff "sane_behavior" is +enabled from cgroup side, which currently is a development option and +not publicly available. + +If somebody created a hierarchy like as follows. + + root + / \ + test1 test2 + | + test3 + +CFQ by default and throttling with "sane_behavior" will handle the +hierarchy correctly. For details on CFQ hierarchy support, refer to +Documentation/block/cfq-iosched.txt. For throttling, all limits apply +to the whole subtree while all statistics are local to the IOs +directly generated by tasks in that cgroup. + +Throttling without "sane_behavior" enabled from cgroup side will +practically treat all groups at same level as if it looks like the +following. + + pivot + / / \ \ + root test1 test2 test3 + +Various user visible config options +=================================== +CONFIG_BLK_CGROUP + - Block IO controller. + +CONFIG_DEBUG_BLK_CGROUP + - Debug help. Right now some additional stats file show up in cgroup + if this option is enabled. + +CONFIG_CFQ_GROUP_IOSCHED + - Enables group scheduling in CFQ. Currently only 1 level of group + creation is allowed. + +CONFIG_BLK_DEV_THROTTLING + - Enable block device throttling support in block layer. + +Details of cgroup files +======================= +Proportional weight policy files +-------------------------------- +- blkio.weight + - Specifies per cgroup weight. This is default weight of the group + on all the devices until and unless overridden by per device rule. + (See blkio.weight_device). + Currently allowed range of weights is from 10 to 1000. + +- blkio.weight_device + - One can specify per cgroup per device rules using this interface. + These rules override the default value of group weight as specified + by blkio.weight. + + Following is the format. + + # echo dev_maj:dev_minor weight > blkio.weight_device + Configure weight=300 on /dev/sdb (8:16) in this cgroup + # echo 8:16 300 > blkio.weight_device + # cat blkio.weight_device + dev weight + 8:16 300 + + Configure weight=500 on /dev/sda (8:0) in this cgroup + # echo 8:0 500 > blkio.weight_device + # cat blkio.weight_device + dev weight + 8:0 500 + 8:16 300 + + Remove specific weight for /dev/sda in this cgroup + # echo 8:0 0 > blkio.weight_device + # cat blkio.weight_device + dev weight + 8:16 300 + +- blkio.leaf_weight[_device] + - Equivalents of blkio.weight[_device] for the purpose of + deciding how much weight tasks in the given cgroup has while + competing with the cgroup's child cgroups. For details, + please refer to Documentation/block/cfq-iosched.txt. + +- blkio.time + - disk time allocated to cgroup per device in milliseconds. First + two fields specify the major and minor number of the device and + third field specifies the disk time allocated to group in + milliseconds. + +- blkio.sectors + - number of sectors transferred to/from disk by the group. First + two fields specify the major and minor number of the device and + third field specifies the number of sectors transferred by the + group to/from the device. + +- blkio.io_service_bytes + - Number of bytes transferred to/from the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of bytes. + +- blkio.io_serviced + - Number of IOs (bio) issued to the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of IOs. + +- blkio.io_service_time + - Total amount of time between request dispatch and request completion + for the IOs done by this cgroup. This is in nanoseconds to make it + meaningful for flash devices too. For devices with queue depth of 1, + this time represents the actual service time. When queue_depth > 1, + that is no longer true as requests may be served out of order. This + may cause the service time for a given IO to include the service time + of multiple IOs when served out of order which may result in total + io_service_time > actual time elapsed. This time is further divided by + the type of operation - read or write, sync or async. First two fields + specify the major and minor number of the device, third field + specifies the operation type and the fourth field specifies the + io_service_time in ns. + +- blkio.io_wait_time + - Total amount of time the IOs for this cgroup spent waiting in the + scheduler queues for service. This can be greater than the total time + elapsed since it is cumulative io_wait_time for all IOs. It is not a + measure of total time the cgroup spent waiting but rather a measure of + the wait_time for its individual IOs. For devices with queue_depth > 1 + this metric does not include the time spent waiting for service once + the IO is dispatched to the device but till it actually gets serviced + (there might be a time lag here due to re-ordering of requests by the + device). This is in nanoseconds to make it meaningful for flash + devices too. This time is further divided by the type of operation - + read or write, sync or async. First two fields specify the major and + minor number of the device, third field specifies the operation type + and the fourth field specifies the io_wait_time in ns. + +- blkio.io_merged + - Total number of bios/requests merged into requests belonging to this + cgroup. This is further divided by the type of operation - read or + write, sync or async. + +- blkio.io_queued + - Total number of requests queued up at any given instant for this + cgroup. This is further divided by the type of operation - read or + write, sync or async. + +- blkio.avg_queue_size + - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. + The average queue size for this cgroup over the entire time of this + cgroup's existence. Queue size samples are taken each time one of the + queues of this cgroup gets a timeslice. + +- blkio.group_wait_time + - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. + This is the amount of time the cgroup had to wait since it became busy + (i.e., went from 0 to 1 request queued) to get a timeslice for one of + its queues. This is different from the io_wait_time which is the + cumulative total of the amount of time spent by each IO in that cgroup + waiting in the scheduler queue. This is in nanoseconds. If this is + read when the cgroup is in a waiting (for timeslice) state, the stat + will only report the group_wait_time accumulated till the last time it + got a timeslice and will not include the current delta. + +- blkio.empty_time + - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. + This is the amount of time a cgroup spends without any pending + requests when not being served, i.e., it does not include any time + spent idling for one of the queues of the cgroup. This is in + nanoseconds. If this is read when the cgroup is in an empty state, + the stat will only report the empty_time accumulated till the last + time it had a pending request and will not include the current delta. + +- blkio.idle_time + - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. + This is the amount of time spent by the IO scheduler idling for a + given cgroup in anticipation of a better request than the existing ones + from other queues/cgroups. This is in nanoseconds. If this is read + when the cgroup is in an idling state, the stat will only report the + idle_time accumulated till the last idle period and will not include + the current delta. + +- blkio.dequeue + - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. This + gives the statistics about how many a times a group was dequeued + from service tree of the device. First two fields specify the major + and minor number of the device and third field specifies the number + of times a group was dequeued from a particular device. + +- blkio.*_recursive + - Recursive version of various stats. These files show the + same information as their non-recursive counterparts but + include stats from all the descendant cgroups. + +Throttling/Upper limit policy files +----------------------------------- +- blkio.throttle.read_bps_device + - Specifies upper limit on READ rate from the device. IO rate is + specified in bytes per second. Rules are per device. Following is + the format. + + echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device + +- blkio.throttle.write_bps_device + - Specifies upper limit on WRITE rate to the device. IO rate is + specified in bytes per second. Rules are per device. Following is + the format. + + echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device + +- blkio.throttle.read_iops_device + - Specifies upper limit on READ rate from the device. IO rate is + specified in IO per second. Rules are per device. Following is + the format. + + echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device + +- blkio.throttle.write_iops_device + - Specifies upper limit on WRITE rate to the device. IO rate is + specified in io per second. Rules are per device. Following is + the format. + + echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device + +Note: If both BW and IOPS rules are specified for a device, then IO is + subjected to both the constraints. + +- blkio.throttle.io_serviced + - Number of IOs (bio) issued to the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of IOs. + +- blkio.throttle.io_service_bytes + - Number of bytes transferred to/from the disk by the group. These + are further divided by the type of operation - read or write, sync + or async. First two fields specify the major and minor number of the + device, third field specifies the operation type and the fourth field + specifies the number of bytes. + +Common files among various policies +----------------------------------- +- blkio.reset_stats + - Writing an int to this file will result in resetting all the stats + for that cgroup. + +CFQ sysfs tunable +================= +/sys/block/<disk>/queue/iosched/slice_idle +------------------------------------------ +On a faster hardware CFQ can be slow, especially with sequential workload. +This happens because CFQ idles on a single queue and single queue might not +drive deeper request queue depths to keep the storage busy. In such scenarios +one can try setting slice_idle=0 and that would switch CFQ to IOPS +(IO operations per second) mode on NCQ supporting hardware. + +That means CFQ will not idle between cfq queues of a cfq group and hence be +able to driver higher queue depth and achieve better throughput. That also +means that cfq provides fairness among groups in terms of IOPS and not in +terms of disk time. + +/sys/block/<disk>/queue/iosched/group_idle +------------------------------------------ +If one disables idling on individual cfq queues and cfq service trees by +setting slice_idle=0, group_idle kicks in. That means CFQ will still idle +on the group in an attempt to provide fairness among groups. + +By default group_idle is same as slice_idle and does not do anything if +slice_idle is enabled. + +One can experience an overall throughput drop if you have created multiple +groups and put applications in that group which are not driving enough +IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle +on individual groups and throughput should improve. |