diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/dev-tools/coccinelle.rst | 488 | ||||
| -rw-r--r-- | Documentation/dev-tools/conf.py | 10 | ||||
| -rw-r--r-- | Documentation/dev-tools/gcov.rst | 260 | ||||
| -rw-r--r-- | Documentation/dev-tools/gdb-kernel-debugging.rst | 175 | ||||
| -rw-r--r-- | Documentation/dev-tools/index.rst | 34 | ||||
| -rw-r--r-- | Documentation/dev-tools/kasan.rst | 173 | ||||
| -rw-r--r-- | Documentation/dev-tools/kcov.rst | 204 | ||||
| -rw-r--r-- | Documentation/dev-tools/kgdb.rst | 916 | ||||
| -rw-r--r-- | Documentation/dev-tools/kmemleak.rst | 220 | ||||
| -rw-r--r-- | Documentation/dev-tools/kselftest.rst | 195 | ||||
| -rw-r--r-- | Documentation/dev-tools/sparse.rst | 105 | ||||
| -rw-r--r-- | Documentation/dev-tools/ubsan.rst | 88 |
12 files changed, 2868 insertions, 0 deletions
diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst new file mode 100644 index 000000000..94f41c290 --- /dev/null +++ b/Documentation/dev-tools/coccinelle.rst @@ -0,0 +1,488 @@ +.. Copyright 2010 Nicolas Palix <npalix@diku.dk> +.. Copyright 2010 Julia Lawall <julia@diku.dk> +.. Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr> + +.. highlight:: none + +Coccinelle +========== + +Coccinelle is a tool for pattern matching and text transformation that has +many uses in kernel development, including the application of complex, +tree-wide patches and detection of problematic programming patterns. + +Getting Coccinelle +------------------- + +The semantic patches included in the kernel use features and options +which are provided by Coccinelle version 1.0.0-rc11 and above. +Using earlier versions will fail as the option names used by +the Coccinelle files and coccicheck have been updated. + +Coccinelle is available through the package manager +of many distributions, e.g. : + + - Debian + - Fedora + - Ubuntu + - OpenSUSE + - Arch Linux + - NetBSD + - FreeBSD + +You can get the latest version released from the Coccinelle homepage at +http://coccinelle.lip6.fr/ + +Once you have it, run the following command:: + + ./configure + make + +as a regular user, and install it with:: + + sudo make install + +Supplemental documentation +--------------------------- + +For supplemental documentation refer to the wiki: + +https://bottest.wiki.kernel.org/coccicheck + +The wiki documentation always refers to the linux-next version of the script. + +Using Coccinelle on the Linux kernel +------------------------------------ + +A Coccinelle-specific target is defined in the top level +Makefile. This target is named ``coccicheck`` and calls the ``coccicheck`` +front-end in the ``scripts`` directory. + +Four basic modes are defined: ``patch``, ``report``, ``context``, and +``org``. The mode to use is specified by setting the MODE variable with +``MODE=<mode>``. + +- ``patch`` proposes a fix, when possible. + +- ``report`` generates a list in the following format: + file:line:column-column: message + +- ``context`` highlights lines of interest and their context in a + diff-like style.Lines of interest are indicated with ``-``. + +- ``org`` generates a report in the Org mode format of Emacs. + +Note that not all semantic patches implement all modes. For easy use +of Coccinelle, the default mode is "report". + +Two other modes provide some common combinations of these modes. + +- ``chain`` tries the previous modes in the order above until one succeeds. + +- ``rep+ctxt`` runs successively the report mode and the context mode. + It should be used with the C option (described later) + which checks the code on a file basis. + +Examples +~~~~~~~~ + +To make a report for every semantic patch, run the following command:: + + make coccicheck MODE=report + +To produce patches, run:: + + make coccicheck MODE=patch + + +The coccicheck target applies every semantic patch available in the +sub-directories of ``scripts/coccinelle`` to the entire Linux kernel. + +For each semantic patch, a commit message is proposed. It gives a +description of the problem being checked by the semantic patch, and +includes a reference to Coccinelle. + +As any static code analyzer, Coccinelle produces false +positives. Thus, reports must be carefully checked, and patches +reviewed. + +To enable verbose messages set the V= variable, for example:: + + make coccicheck MODE=report V=1 + +Coccinelle parallelization +--------------------------- + +By default, coccicheck tries to run as parallel as possible. To change +the parallelism, set the J= variable. For example, to run across 4 CPUs:: + + make coccicheck MODE=report J=4 + +As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization, +if support for this is detected you will benefit from parmap parallelization. + +When parmap is enabled coccicheck will enable dynamic load balancing by using +``--chunksize 1`` argument, this ensures we keep feeding threads with work +one by one, so that we avoid the situation where most work gets done by only +a few threads. With dynamic load balancing, if a thread finishes early we keep +feeding it more work. + +When parmap is enabled, if an error occurs in Coccinelle, this error +value is propagated back, the return value of the ``make coccicheck`` +captures this return value. + +Using Coccinelle with a single semantic patch +--------------------------------------------- + +The optional make variable COCCI can be used to check a single +semantic patch. In that case, the variable must be initialized with +the name of the semantic patch to apply. + +For instance:: + + make coccicheck COCCI=<my_SP.cocci> MODE=patch + +or:: + + make coccicheck COCCI=<my_SP.cocci> MODE=report + + +Controlling Which Files are Processed by Coccinelle +--------------------------------------------------- + +By default the entire kernel source tree is checked. + +To apply Coccinelle to a specific directory, ``M=`` can be used. +For example, to check drivers/net/wireless/ one may write:: + + make coccicheck M=drivers/net/wireless/ + +To apply Coccinelle on a file basis, instead of a directory basis, the +following command may be used:: + + make C=1 CHECK="scripts/coccicheck" + +To check only newly edited code, use the value 2 for the C flag, i.e.:: + + make C=2 CHECK="scripts/coccicheck" + +In these modes, which works on a file basis, there is no information +about semantic patches displayed, and no commit message proposed. + +This runs every semantic patch in scripts/coccinelle by default. The +COCCI variable may additionally be used to only apply a single +semantic patch as shown in the previous section. + +The "report" mode is the default. You can select another one with the +MODE variable explained above. + +Debugging Coccinelle SmPL patches +--------------------------------- + +Using coccicheck is best as it provides in the spatch command line +include options matching the options used when we compile the kernel. +You can learn what these options are by using V=1, you could then +manually run Coccinelle with debug options added. + +Alternatively you can debug running Coccinelle against SmPL patches +by asking for stderr to be redirected to stderr, by default stderr +is redirected to /dev/null, if you'd like to capture stderr you +can specify the ``DEBUG_FILE="file.txt"`` option to coccicheck. For +instance:: + + rm -f cocci.err + make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err + cat cocci.err + +You can use SPFLAGS to add debugging flags, for instance you may want to +add both --profile --show-trying to SPFLAGS when debugging. For instance +you may want to use:: + + rm -f err.log + export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci + make coccicheck DEBUG_FILE="err.log" MODE=report SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c + +err.log will now have the profiling information, while stdout will +provide some progress information as Coccinelle moves forward with +work. + +DEBUG_FILE support is only supported when using coccinelle >= 1.0.2. + +.cocciconfig support +-------------------- + +Coccinelle supports reading .cocciconfig for default Coccinelle options that +should be used every time spatch is spawned, the order of precedence for +variables for .cocciconfig is as follows: + +- Your current user's home directory is processed first +- Your directory from which spatch is called is processed next +- The directory provided with the --dir option is processed last, if used + +Since coccicheck runs through make, it naturally runs from the kernel +proper dir, as such the second rule above would be implied for picking up a +.cocciconfig when using ``make coccicheck``. + +``make coccicheck`` also supports using M= targets.If you do not supply +any M= target, it is assumed you want to target the entire kernel. +The kernel coccicheck script has:: + + if [ "$KBUILD_EXTMOD" = "" ] ; then + OPTIONS="--dir $srctree $COCCIINCLUDE" + else + OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE" + fi + +KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases +the spatch --dir argument is used, as such third rule applies when whether M= +is used or not, and when M= is used the target directory can have its own +.cocciconfig file. When M= is not passed as an argument to coccicheck the +target directory is the same as the directory from where spatch was called. + +If not using the kernel's coccicheck target, keep the above precedence +order logic of .cocciconfig reading. If using the kernel's coccicheck target, +override any of the kernel's .coccicheck's settings using SPFLAGS. + +We help Coccinelle when used against Linux with a set of sensible defaults +options for Linux with our own Linux .cocciconfig. This hints to coccinelle +git can be used for ``git grep`` queries over coccigrep. A timeout of 200 +seconds should suffice for now. + +The options picked up by coccinelle when reading a .cocciconfig do not appear +as arguments to spatch processes running on your system, to confirm what +options will be used by Coccinelle run:: + + spatch --print-options-only + +You can override with your own preferred index option by using SPFLAGS. Take +note that when there are conflicting options Coccinelle takes precedence for +the last options passed. Using .cocciconfig is possible to use idutils, however +given the order of precedence followed by Coccinelle, since the kernel now +carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if +desired. See below section "Additional flags" for more details on how to use +idutils. + +Additional flags +---------------- + +Additional flags can be passed to spatch through the SPFLAGS +variable. This works as Coccinelle respects the last flags +given to it when options are in conflict. :: + + make SPFLAGS=--use-glimpse coccicheck + +Coccinelle supports idutils as well but requires coccinelle >= 1.0.6. +When no ID file is specified coccinelle assumes your ID database file +is in the file .id-utils.index on the top level of the kernel, coccinelle +carries a script scripts/idutils_index.sh which creates the database with:: + + mkid -i C --output .id-utils.index + +If you have another database filename you can also just symlink with this +name. :: + + make SPFLAGS=--use-idutils coccicheck + +Alternatively you can specify the database filename explicitly, for +instance:: + + make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck + +See ``spatch --help`` to learn more about spatch options. + +Note that the ``--use-glimpse`` and ``--use-idutils`` options +require external tools for indexing the code. None of them is +thus active by default. However, by indexing the code with +one of these tools, and according to the cocci file used, +spatch could proceed the entire code base more quickly. + +SmPL patch specific options +--------------------------- + +SmPL patches can have their own requirements for options passed +to Coccinelle. SmPL patch specific options can be provided by +providing them at the top of the SmPL patch, for instance:: + + // Options: --no-includes --include-headers + +SmPL patch Coccinelle requirements +---------------------------------- + +As Coccinelle features get added some more advanced SmPL patches +may require newer versions of Coccinelle. If an SmPL patch requires +at least a version of Coccinelle, this can be specified as follows, +as an example if requiring at least Coccinelle >= 1.0.5:: + + // Requires: 1.0.5 + +Proposing new semantic patches +------------------------------- + +New semantic patches can be proposed and submitted by kernel +developers. For sake of clarity, they should be organized in the +sub-directories of ``scripts/coccinelle/``. + + +Detailed description of the ``report`` mode +------------------------------------------- + +``report`` generates a list in the following format:: + + file:line:column-column: message + +Example +~~~~~~~ + +Running:: + + make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci + +will execute the following part of the SmPL script:: + + <smpl> + @r depends on !context && !patch && (org || report)@ + expression x; + position p; + @@ + + ERR_PTR@p(PTR_ERR(x)) + + @script:python depends on report@ + p << r.p; + x << r.x; + @@ + + msg="ERR_CAST can be used with %s" % (x) + coccilib.report.print_report(p[0], msg) + </smpl> + +This SmPL excerpt generates entries on the standard output, as +illustrated below:: + + /home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg + /home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth + /home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg + + +Detailed description of the ``patch`` mode +------------------------------------------ + +When the ``patch`` mode is available, it proposes a fix for each problem +identified. + +Example +~~~~~~~ + +Running:: + + make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci + +will execute the following part of the SmPL script:: + + <smpl> + @ depends on !context && patch && !org && !report @ + expression x; + @@ + + - ERR_PTR(PTR_ERR(x)) + + ERR_CAST(x) + </smpl> + +This SmPL excerpt generates patch hunks on the standard output, as +illustrated below:: + + diff -u -p a/crypto/ctr.c b/crypto/ctr.c + --- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200 + +++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200 + @@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct + alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, + CRYPTO_ALG_TYPE_MASK); + if (IS_ERR(alg)) + - return ERR_PTR(PTR_ERR(alg)); + + return ERR_CAST(alg); + + /* Block size must be >= 4 bytes. */ + err = -EINVAL; + +Detailed description of the ``context`` mode +-------------------------------------------- + +``context`` highlights lines of interest and their context +in a diff-like style. + + **NOTE**: The diff-like output generated is NOT an applicable patch. The + intent of the ``context`` mode is to highlight the important lines + (annotated with minus, ``-``) and gives some surrounding context + lines around. This output can be used with the diff mode of + Emacs to review the code. + +Example +~~~~~~~ + +Running:: + + make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci + +will execute the following part of the SmPL script:: + + <smpl> + @ depends on context && !patch && !org && !report@ + expression x; + @@ + + * ERR_PTR(PTR_ERR(x)) + </smpl> + +This SmPL excerpt generates diff hunks on the standard output, as +illustrated below:: + + diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing + --- /home/user/linux/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200 + +++ /tmp/nothing + @@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct + alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, + CRYPTO_ALG_TYPE_MASK); + if (IS_ERR(alg)) + - return ERR_PTR(PTR_ERR(alg)); + + /* Block size must be >= 4 bytes. */ + err = -EINVAL; + +Detailed description of the ``org`` mode +---------------------------------------- + +``org`` generates a report in the Org mode format of Emacs. + +Example +~~~~~~~ + +Running:: + + make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci + +will execute the following part of the SmPL script:: + + <smpl> + @r depends on !context && !patch && (org || report)@ + expression x; + position p; + @@ + + ERR_PTR@p(PTR_ERR(x)) + + @script:python depends on org@ + p << r.p; + x << r.x; + @@ + + msg="ERR_CAST can be used with %s" % (x) + msg_safe=msg.replace("[","@(").replace("]",")") + coccilib.org.print_todo(p[0], msg_safe) + </smpl> + +This SmPL excerpt generates Org entries on the standard output, as +illustrated below:: + + * TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]] + * TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]] + * TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]] diff --git a/Documentation/dev-tools/conf.py b/Documentation/dev-tools/conf.py new file mode 100644 index 000000000..7faafa3f7 --- /dev/null +++ b/Documentation/dev-tools/conf.py @@ -0,0 +1,10 @@ +# -*- coding: utf-8; mode: python -*- + +project = "Development tools for the kernel" + +tags.add("subproject") + +latex_documents = [ + ('index', 'dev-tools.tex', project, + 'The kernel development community', 'manual'), +] diff --git a/Documentation/dev-tools/gcov.rst b/Documentation/dev-tools/gcov.rst new file mode 100644 index 000000000..69a7d90c3 --- /dev/null +++ b/Documentation/dev-tools/gcov.rst @@ -0,0 +1,260 @@ +Using gcov with the Linux kernel +================================ + +gcov profiling kernel support enables the use of GCC's coverage testing +tool gcov_ with the Linux kernel. Coverage data of a running kernel +is exported in gcov-compatible format via the "gcov" debugfs directory. +To get coverage data for a specific file, change to the kernel build +directory and use gcov with the ``-o`` option as follows (requires root):: + + # cd /tmp/linux-out + # gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c + +This will create source code files annotated with execution counts +in the current directory. In addition, graphical gcov front-ends such +as lcov_ can be used to automate the process of collecting data +for the entire kernel and provide coverage overviews in HTML format. + +Possible uses: + +* debugging (has this line been reached at all?) +* test improvement (how do I change my test to cover these lines?) +* minimizing kernel configurations (do I need this option if the + associated code is never run?) + +.. _gcov: http://gcc.gnu.org/onlinedocs/gcc/Gcov.html +.. _lcov: http://ltp.sourceforge.net/coverage/lcov.php + + +Preparation +----------- + +Configure the kernel with:: + + CONFIG_DEBUG_FS=y + CONFIG_GCOV_KERNEL=y + +select the gcc's gcov format, default is autodetect based on gcc version:: + + CONFIG_GCOV_FORMAT_AUTODETECT=y + +and to get coverage data for the entire kernel:: + + CONFIG_GCOV_PROFILE_ALL=y + +Note that kernels compiled with profiling flags will be significantly +larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported +on all architectures. + +Profiling data will only become accessible once debugfs has been +mounted:: + + mount -t debugfs none /sys/kernel/debug + + +Customization +------------- + +To enable profiling for specific files or directories, add a line +similar to the following to the respective kernel Makefile: + +- For a single file (e.g. main.o):: + + GCOV_PROFILE_main.o := y + +- For all files in one directory:: + + GCOV_PROFILE := y + +To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL +is specified, use:: + + GCOV_PROFILE_main.o := n + +and:: + + GCOV_PROFILE := n + +Only files which are linked to the main kernel image or are compiled as +kernel modules are supported by this mechanism. + + +Files +----- + +The gcov kernel support creates the following files in debugfs: + +``/sys/kernel/debug/gcov`` + Parent directory for all gcov-related files. + +``/sys/kernel/debug/gcov/reset`` + Global reset file: resets all coverage data to zero when + written to. + +``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcda`` + The actual gcov data file as understood by the gcov + tool. Resets file coverage data to zero when written to. + +``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcno`` + Symbolic link to a static data file required by the gcov + tool. This file is generated by gcc when compiling with + option ``-ftest-coverage``. + + +Modules +------- + +Kernel modules may contain cleanup code which is only run during +module unload time. The gcov mechanism provides a means to collect +coverage data for such code by keeping a copy of the data associated +with the unloaded module. This data remains available through debugfs. +Once the module is loaded again, the associated coverage counters are +initialized with the data from its previous instantiation. + +This behavior can be deactivated by specifying the gcov_persist kernel +parameter:: + + gcov_persist=0 + +At run-time, a user can also choose to discard data for an unloaded +module by writing to its data file or the global reset file. + + +Separated build and test machines +--------------------------------- + +The gcov kernel profiling infrastructure is designed to work out-of-the +box for setups where kernels are built and run on the same machine. In +cases where the kernel runs on a separate machine, special preparations +must be made, depending on where the gcov tool is used: + +a) gcov is run on the TEST machine + + The gcov tool version on the test machine must be compatible with the + gcc version used for kernel build. Also the following files need to be + copied from build to test machine: + + from the source tree: + - all C source files + headers + + from the build tree: + - all C source files + headers + - all .gcda and .gcno files + - all links to directories + + It is important to note that these files need to be placed into the + exact same file system location on the test machine as on the build + machine. If any of the path components is symbolic link, the actual + directory needs to be used instead (due to make's CURDIR handling). + +b) gcov is run on the BUILD machine + + The following files need to be copied after each test case from test + to build machine: + + from the gcov directory in sysfs: + - all .gcda files + - all links to .gcno files + + These files can be copied to any location on the build machine. gcov + must then be called with the -o option pointing to that directory. + + Example directory setup on the build machine:: + + /tmp/linux: kernel source tree + /tmp/out: kernel build directory as specified by make O= + /tmp/coverage: location of the files copied from the test machine + + [user@build] cd /tmp/out + [user@build] gcov -o /tmp/coverage/tmp/out/init main.c + + +Troubleshooting +--------------- + +Problem + Compilation aborts during linker step. + +Cause + Profiling flags are specified for source files which are not + linked to the main kernel or which are linked by a custom + linker procedure. + +Solution + Exclude affected source files from profiling by specifying + ``GCOV_PROFILE := n`` or ``GCOV_PROFILE_basename.o := n`` in the + corresponding Makefile. + +Problem + Files copied from sysfs appear empty or incomplete. + +Cause + Due to the way seq_file works, some tools such as cp or tar + may not correctly copy files from sysfs. + +Solution + Use ``cat``' to read ``.gcda`` files and ``cp -d`` to copy links. + Alternatively use the mechanism shown in Appendix B. + + +Appendix A: gather_on_build.sh +------------------------------ + +Sample script to gather coverage meta files on the build machine +(see 6a): + +.. code-block:: sh + + #!/bin/bash + + KSRC=$1 + KOBJ=$2 + DEST=$3 + + if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then + echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2 + exit 1 + fi + + KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -) + KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -) + + find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \ + -perm /u+r,g+r | tar cfz $DEST -P -T - + + if [ $? -eq 0 ] ; then + echo "$DEST successfully created, copy to test system and unpack with:" + echo " tar xfz $DEST -P" + else + echo "Could not create file $DEST" + fi + + +Appendix B: gather_on_test.sh +----------------------------- + +Sample script to gather coverage data files on the test machine +(see 6b): + +.. code-block:: sh + + #!/bin/bash -e + + DEST=$1 + GCDA=/sys/kernel/debug/gcov + + if [ -z "$DEST" ] ; then + echo "Usage: $0 <output.tar.gz>" >&2 + exit 1 + fi + + TEMPDIR=$(mktemp -d) + echo Collecting data.. + find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \; + find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \; + find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \; + tar czf $DEST -C $TEMPDIR sys + rm -rf $TEMPDIR + + echo "$DEST successfully created, copy to build system and unpack with:" + echo " tar xfz $DEST" diff --git a/Documentation/dev-tools/gdb-kernel-debugging.rst b/Documentation/dev-tools/gdb-kernel-debugging.rst new file mode 100644 index 000000000..19df79286 --- /dev/null +++ b/Documentation/dev-tools/gdb-kernel-debugging.rst @@ -0,0 +1,175 @@ +.. highlight:: none + +Debugging kernel and modules via gdb +==================================== + +The kernel debugger kgdb, hypervisors like QEMU or JTAG-based hardware +interfaces allow to debug the Linux kernel and its modules during runtime +using gdb. Gdb comes with a powerful scripting interface for python. The +kernel provides a collection of helper scripts that can simplify typical +kernel debugging steps. This is a short tutorial about how to enable and use +them. It focuses on QEMU/KVM virtual machines as target, but the examples can +be transferred to the other gdb stubs as well. + + +Requirements +------------ + +- gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true + for distributions) + + +Setup +----- + +- Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and + www.qemu.org for more details). For cross-development, + http://landley.net/aboriginal/bin keeps a pool of machine images and + toolchains that can be helpful to start from. + +- Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave + CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports + CONFIG_FRAME_POINTER, keep it enabled. + +- Install that kernel on the guest, turn off KASLR if necessary by adding + "nokaslr" to the kernel command line. + Alternatively, QEMU allows to boot the kernel directly using -kernel, + -append, -initrd command line switches. This is generally only useful if + you do not depend on modules. See QEMU documentation for more details on + this mode. In this case, you should build the kernel with + CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR. + +- Enable the gdb stub of QEMU/KVM, either + + - at VM startup time by appending "-s" to the QEMU command line + + or + + - during runtime by issuing "gdbserver" from the QEMU monitor + console + +- cd /path/to/linux-build + +- Start gdb: gdb vmlinux + + Note: Some distros may restrict auto-loading of gdb scripts to known safe + directories. In case gdb reports to refuse loading vmlinux-gdb.py, add:: + + add-auto-load-safe-path /path/to/linux-build + + to ~/.gdbinit. See gdb help for more details. + +- Attach to the booted guest:: + + (gdb) target remote :1234 + + +Examples of using the Linux-provided gdb helpers +------------------------------------------------ + +- Load module (and main kernel) symbols:: + + (gdb) lx-symbols + loading vmlinux + scanning for modules in /home/user/linux/build + loading @0xffffffffa0020000: /home/user/linux/build/net/netfilter/xt_tcpudp.ko + loading @0xffffffffa0016000: /home/user/linux/build/net/netfilter/xt_pkttype.ko + loading @0xffffffffa0002000: /home/user/linux/build/net/netfilter/xt_limit.ko + loading @0xffffffffa00ca000: /home/user/linux/build/net/packet/af_packet.ko + loading @0xffffffffa003c000: /home/user/linux/build/fs/fuse/fuse.ko + ... + loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko + +- Set a breakpoint on some not yet loaded module function, e.g.:: + + (gdb) b btrfs_init_sysfs + Function "btrfs_init_sysfs" not defined. + Make breakpoint pending on future shared library load? (y or [n]) y + Breakpoint 1 (btrfs_init_sysfs) pending. + +- Continue the target:: + + (gdb) c + +- Load the module on the target and watch the symbols being loaded as well as + the breakpoint hit:: + + loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko + loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko + loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko + loading @0xffffffffa01b1000: /home/user/linux/build/fs/btrfs/btrfs.ko + + Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36 + 36 btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj); + +- Dump the log buffer of the target kernel:: + + (gdb) lx-dmesg + [ 0.000000] Initializing cgroup subsys cpuset + [ 0.000000] Initializing cgroup subsys cpu + [ 0.000000] Linux version 3.8.0-rc4-dbg+ (... + [ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 vga=0x314 + [ 0.000000] e820: BIOS-provided physical RAM map: + [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable + [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved + .... + +- Examine fields of the current task struct:: + + (gdb) p $lx_current().pid + $1 = 4998 + (gdb) p $lx_current().comm + $2 = "modprobe\000\000\000\000\000\000\000" + +- Make use of the per-cpu function for the current or a specified CPU:: + + (gdb) p $lx_per_cpu("runqueues").nr_running + $3 = 1 + (gdb) p $lx_per_cpu("runqueues", 2).nr_running + $4 = 0 + +- Dig into hrtimers using the container_of helper:: + + (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next + (gdb) p *$container_of($next, "struct hrtimer", "node") + $5 = { + node = { + node = { + __rb_parent_color = 18446612133355256072, + rb_right = 0x0 <irq_stack_union>, + rb_left = 0x0 <irq_stack_union> + }, + expires = { + tv64 = 1835268000000 + } + }, + _softexpires = { + tv64 = 1835268000000 + }, + function = 0xffffffff81078232 <tick_sched_timer>, + base = 0xffff88003fd0d6f0, + state = 1, + start_pid = 0, + start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>, + start_comm = "swapper/2\000\000\000\000\000\000" + } + + +List of commands and functions +------------------------------ + +The number of commands and convenience functions may evolve over the time, +this is just a snapshot of the initial version:: + + (gdb) apropos lx + function lx_current -- Return current task + function lx_module -- Find module by name and return the module variable + function lx_per_cpu -- Return per-cpu variable + function lx_task_by_pid -- Find Linux task by PID and return the task_struct variable + function lx_thread_info -- Calculate Linux thread_info from task variable + lx-dmesg -- Print Linux kernel log buffer + lx-lsmod -- List currently loaded modules + lx-symbols -- (Re-)load symbols of Linux kernel and currently loaded modules + +Detailed help can be obtained via "help <command-name>" for commands and "help +function <function-name>" for convenience functions. diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst new file mode 100644 index 000000000..e313925fb --- /dev/null +++ b/Documentation/dev-tools/index.rst @@ -0,0 +1,34 @@ +================================ +Development tools for the kernel +================================ + +This document is a collection of documents about development tools that can +be used to work on the kernel. For now, the documents have been pulled +together without any significant effot to integrate them into a coherent +whole; patches welcome! + +.. class:: toc-title + + Table of contents + +.. toctree:: + :maxdepth: 2 + + coccinelle + sparse + kcov + gcov + kasan + ubsan + kmemleak + gdb-kernel-debugging + kgdb + kselftest + + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst new file mode 100644 index 000000000..aabc8738b --- /dev/null +++ b/Documentation/dev-tools/kasan.rst @@ -0,0 +1,173 @@ +The Kernel Address Sanitizer (KASAN) +==================================== + +Overview +-------- + +KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides +a fast and comprehensive solution for finding use-after-free and out-of-bounds +bugs. + +KASAN uses compile-time instrumentation for checking every memory access, +therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is +required for detection of out-of-bounds accesses to stack or global variables. + +Currently KASAN is supported only for the x86_64 and arm64 architectures. + +Usage +----- + +To enable KASAN configure kernel with:: + + CONFIG_KASAN = y + +and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and +inline are compiler instrumentation types. The former produces smaller binary +the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC +version 5.0 or later. + +KASAN works with both SLUB and SLAB memory allocators. +For better bug detection and nicer reporting, enable CONFIG_STACKTRACE. + +To disable instrumentation for specific files or directories, add a line +similar to the following to the respective kernel Makefile: + +- For a single file (e.g. main.o):: + + KASAN_SANITIZE_main.o := n + +- For all files in one directory:: + + KASAN_SANITIZE := n + +Error reports +~~~~~~~~~~~~~ + +A typical out of bounds access report looks like this:: + + ================================================================== + BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3 + Write of size 1 by task modprobe/1689 + ============================================================================= + BUG kmalloc-128 (Not tainted): kasan error + ----------------------------------------------------------------------------- + + Disabling lock debugging due to kernel taint + INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689 + __slab_alloc+0x4b4/0x4f0 + kmem_cache_alloc_trace+0x10b/0x190 + kmalloc_oob_right+0x3d/0x75 [test_kasan] + init_module+0x9/0x47 [test_kasan] + do_one_initcall+0x99/0x200 + load_module+0x2cb3/0x3b20 + SyS_finit_module+0x76/0x80 + system_call_fastpath+0x12/0x17 + INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080 + INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720 + + Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ + Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk + Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk + Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk + Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk + Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk + Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk + Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk + Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. + Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc ........ + Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ + CPU: 0 PID: 1689 Comm: modprobe Tainted: G B 3.18.0-rc1-mm1+ #98 + Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 + ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78 + ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8 + ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558 + Call Trace: + [<ffffffff81cc68ae>] dump_stack+0x46/0x58 + [<ffffffff811fd848>] print_trailer+0xf8/0x160 + [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan] + [<ffffffff811ff0f5>] object_err+0x35/0x40 + [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan] + [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0 + [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40 + [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40 + [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40 + [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan] + [<ffffffff8120a995>] __asan_store1+0x75/0xb0 + [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan] + [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan] + [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan] + [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan] + [<ffffffff810002d9>] do_one_initcall+0x99/0x200 + [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160 + [<ffffffff81114f63>] load_module+0x2cb3/0x3b20 + [<ffffffff8110fd70>] ? m_show+0x240/0x240 + [<ffffffff81115f06>] SyS_finit_module+0x76/0x80 + [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17 + Memory state around the buggy address: + ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc + ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc + ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc + ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc + ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00 + >ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc + ^ + ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc + ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc + ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb + ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb + ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb + ================================================================== + +The header of the report discribe what kind of bug happened and what kind of +access caused it. It's followed by the description of the accessed slub object +(see 'SLUB Debug output' section in Documentation/vm/slub.rst for details) and +the description of the accessed memory page. + +In the last section the report shows memory state around the accessed address. +Reading this part requires some understanding of how KASAN works. + +The state of each 8 aligned bytes of memory is encoded in one shadow byte. +Those 8 bytes can be accessible, partially accessible, freed or be a redzone. +We use the following encoding for each shadow byte: 0 means that all 8 bytes +of the corresponding memory region are accessible; number N (1 <= N <= 7) means +that the first N bytes are accessible, and other (8 - N) bytes are not; +any negative value indicates that the entire 8-byte word is inaccessible. +We use different negative values to distinguish between different kinds of +inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h). + +In the report above the arrows point to the shadow byte 03, which means that +the accessed address is partially accessible. + + +Implementation details +---------------------- + +From a high level, our approach to memory error detection is similar to that +of kmemcheck: use shadow memory to record whether each byte of memory is safe +to access, and use compile-time instrumentation to check shadow memory on each +memory access. + +AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory +(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and +offset to translate a memory address to its corresponding shadow address. + +Here is the function which translates an address to its corresponding shadow +address:: + + static inline void *kasan_mem_to_shadow(const void *addr) + { + return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT) + + KASAN_SHADOW_OFFSET; + } + +where ``KASAN_SHADOW_SCALE_SHIFT = 3``. + +Compile-time instrumentation used for checking memory accesses. Compiler inserts +function calls (__asan_load*(addr), __asan_store*(addr)) before each memory +access of size 1, 2, 4, 8 or 16. These functions check whether memory access is +valid or not by checking corresponding shadow memory. + +GCC 5.0 has possibility to perform inline instrumentation. Instead of making +function calls GCC directly inserts the code to check the shadow memory. +This option significantly enlarges kernel but it gives x1.1-x2 performance +boost over outline instrumented kernel. diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst new file mode 100644 index 000000000..c2f6452e3 --- /dev/null +++ b/Documentation/dev-tools/kcov.rst @@ -0,0 +1,204 @@ +kcov: code coverage for fuzzing +=============================== + +kcov exposes kernel code coverage information in a form suitable for coverage- +guided fuzzing (randomized testing). Coverage data of a running kernel is +exported via the "kcov" debugfs file. Coverage collection is enabled on a task +basis, and thus it can capture precise coverage of a single system call. + +Note that kcov does not aim to collect as much coverage as possible. It aims +to collect more or less stable coverage that is function of syscall inputs. +To achieve this goal it does not collect coverage in soft/hard interrupts +and instrumentation of some inherently non-deterministic parts of kernel is +disabled (e.g. scheduler, locking). + +kcov is also able to collect comparison operands from the instrumented code +(this feature currently requires that the kernel is compiled with clang). + +Prerequisites +------------- + +Configure the kernel with:: + + CONFIG_KCOV=y + +CONFIG_KCOV requires gcc built on revision 231296 or later. + +If the comparison operands need to be collected, set:: + + CONFIG_KCOV_ENABLE_COMPARISONS=y + +Profiling data will only become accessible once debugfs has been mounted:: + + mount -t debugfs none /sys/kernel/debug + +Coverage collection +------------------- +The following program demonstrates coverage collection from within a test +program using kcov: + +.. code-block:: c + + #include <stdio.h> + #include <stddef.h> + #include <stdint.h> + #include <stdlib.h> + #include <sys/types.h> + #include <sys/stat.h> + #include <sys/ioctl.h> + #include <sys/mman.h> + #include <unistd.h> + #include <fcntl.h> + + #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) + #define KCOV_ENABLE _IO('c', 100) + #define KCOV_DISABLE _IO('c', 101) + #define COVER_SIZE (64<<10) + + #define KCOV_TRACE_PC 0 + #define KCOV_TRACE_CMP 1 + + int main(int argc, char **argv) + { + int fd; + unsigned long *cover, n, i; + + /* A single fd descriptor allows coverage collection on a single + * thread. + */ + fd = open("/sys/kernel/debug/kcov", O_RDWR); + if (fd == -1) + perror("open"), exit(1); + /* Setup trace mode and trace size. */ + if (ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE)) + perror("ioctl"), exit(1); + /* Mmap buffer shared between kernel- and user-space. */ + cover = (unsigned long*)mmap(NULL, COVER_SIZE * sizeof(unsigned long), + PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if ((void*)cover == MAP_FAILED) + perror("mmap"), exit(1); + /* Enable coverage collection on the current thread. */ + if (ioctl(fd, KCOV_ENABLE, KCOV_TRACE_PC)) + perror("ioctl"), exit(1); + /* Reset coverage from the tail of the ioctl() call. */ + __atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED); + /* That's the target syscal call. */ + read(-1, NULL, 0); + /* Read number of PCs collected. */ + n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED); + for (i = 0; i < n; i++) + printf("0x%lx\n", cover[i + 1]); + /* Disable coverage collection for the current thread. After this call + * coverage can be enabled for a different thread. + */ + if (ioctl(fd, KCOV_DISABLE, 0)) + perror("ioctl"), exit(1); + /* Free resources. */ + if (munmap(cover, COVER_SIZE * sizeof(unsigned long))) + perror("munmap"), exit(1); + if (close(fd)) + perror("close"), exit(1); + return 0; + } + +After piping through addr2line output of the program looks as follows:: + + SyS_read + fs/read_write.c:562 + __fdget_pos + fs/file.c:774 + __fget_light + fs/file.c:746 + __fget_light + fs/file.c:750 + __fget_light + fs/file.c:760 + __fdget_pos + fs/file.c:784 + SyS_read + fs/read_write.c:562 + +If a program needs to collect coverage from several threads (independently), +it needs to open /sys/kernel/debug/kcov in each thread separately. + +The interface is fine-grained to allow efficient forking of test processes. +That is, a parent process opens /sys/kernel/debug/kcov, enables trace mode, +mmaps coverage buffer and then forks child processes in a loop. Child processes +only need to enable coverage (disable happens automatically on thread end). + +Comparison operands collection +------------------------------ +Comparison operands collection is similar to coverage collection: + +.. code-block:: c + + /* Same includes and defines as above. */ + + /* Number of 64-bit words per record. */ + #define KCOV_WORDS_PER_CMP 4 + + /* + * The format for the types of collected comparisons. + * + * Bit 0 shows whether one of the arguments is a compile-time constant. + * Bits 1 & 2 contain log2 of the argument size, up to 8 bytes. + */ + + #define KCOV_CMP_CONST (1 << 0) + #define KCOV_CMP_SIZE(n) ((n) << 1) + #define KCOV_CMP_MASK KCOV_CMP_SIZE(3) + + int main(int argc, char **argv) + { + int fd; + uint64_t *cover, type, arg1, arg2, is_const, size; + unsigned long n, i; + + fd = open("/sys/kernel/debug/kcov", O_RDWR); + if (fd == -1) + perror("open"), exit(1); + if (ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE)) + perror("ioctl"), exit(1); + /* + * Note that the buffer pointer is of type uint64_t*, because all + * the comparison operands are promoted to uint64_t. + */ + cover = (uint64_t *)mmap(NULL, COVER_SIZE * sizeof(unsigned long), + PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if ((void*)cover == MAP_FAILED) + perror("mmap"), exit(1); + /* Note KCOV_TRACE_CMP instead of KCOV_TRACE_PC. */ + if (ioctl(fd, KCOV_ENABLE, KCOV_TRACE_CMP)) + perror("ioctl"), exit(1); + __atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED); + read(-1, NULL, 0); + /* Read number of comparisons collected. */ + n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED); + for (i = 0; i < n; i++) { + type = cover[i * KCOV_WORDS_PER_CMP + 1]; + /* arg1 and arg2 - operands of the comparison. */ + arg1 = cover[i * KCOV_WORDS_PER_CMP + 2]; + arg2 = cover[i * KCOV_WORDS_PER_CMP + 3]; + /* ip - caller address. */ + ip = cover[i * KCOV_WORDS_PER_CMP + 4]; + /* size of the operands. */ + size = 1 << ((type & KCOV_CMP_MASK) >> 1); + /* is_const - true if either operand is a compile-time constant.*/ + is_const = type & KCOV_CMP_CONST; + printf("ip: 0x%lx type: 0x%lx, arg1: 0x%lx, arg2: 0x%lx, " + "size: %lu, %s\n", + ip, type, arg1, arg2, size, + is_const ? "const" : "non-const"); + } + if (ioctl(fd, KCOV_DISABLE, 0)) + perror("ioctl"), exit(1); + /* Free resources. */ + if (munmap(cover, COVER_SIZE * sizeof(unsigned long))) + perror("munmap"), exit(1); + if (close(fd)) + perror("close"), exit(1); + return 0; + } + +Note that the kcov modes (coverage collection or comparison operands) are +mutually exclusive. diff --git a/Documentation/dev-tools/kgdb.rst b/Documentation/dev-tools/kgdb.rst new file mode 100644 index 000000000..d38be58f8 --- /dev/null +++ b/Documentation/dev-tools/kgdb.rst @@ -0,0 +1,916 @@ +================================================= +Using kgdb, kdb and the kernel debugger internals +================================================= + +:Author: Jason Wessel + +Introduction +============ + +The kernel has two different debugger front ends (kdb and kgdb) which +interface to the debug core. It is possible to use either of the +debugger front ends and dynamically transition between them if you +configure the kernel properly at compile and runtime. + +Kdb is simplistic shell-style interface which you can use on a system +console with a keyboard or serial console. You can use it to inspect +memory, registers, process lists, dmesg, and even set breakpoints to +stop in a certain location. Kdb is not a source level debugger, although +you can set breakpoints and execute some basic kernel run control. Kdb +is mainly aimed at doing some analysis to aid in development or +diagnosing kernel problems. You can access some symbols by name in +kernel built-ins or in kernel modules if the code was built with +``CONFIG_KALLSYMS``. + +Kgdb is intended to be used as a source level debugger for the Linux +kernel. It is used along with gdb to debug a Linux kernel. The +expectation is that gdb can be used to "break in" to the kernel to +inspect memory, variables and look through call stack information +similar to the way an application developer would use gdb to debug an +application. It is possible to place breakpoints in kernel code and +perform some limited execution stepping. + +Two machines are required for using kgdb. One of these machines is a +development machine and the other is the target machine. The kernel to +be debugged runs on the target machine. The development machine runs an +instance of gdb against the vmlinux file which contains the symbols (not +a boot image such as bzImage, zImage, uImage...). In gdb the developer +specifies the connection parameters and connects to kgdb. The type of +connection a developer makes with gdb depends on the availability of +kgdb I/O modules compiled as built-ins or loadable kernel modules in the +test machine's kernel. + +Compiling a kernel +================== + +- In order to enable compilation of kdb, you must first enable kgdb. + +- The kgdb test compile options are described in the kgdb test suite + chapter. + +Kernel config options for kgdb +------------------------------ + +To enable ``CONFIG_KGDB`` you should look under +:menuselection:`Kernel hacking --> Kernel debugging` and select +:menuselection:`KGDB: kernel debugger`. + +While it is not a hard requirement that you have symbols in your vmlinux +file, gdb tends not to be very useful without the symbolic data, so you +will want to turn on ``CONFIG_DEBUG_INFO`` which is called +:menuselection:`Compile the kernel with debug info` in the config menu. + +It is advised, but not required, that you turn on the +``CONFIG_FRAME_POINTER`` kernel option which is called :menuselection:`Compile +the kernel with frame pointers` in the config menu. This option inserts code +to into the compiled executable which saves the frame information in +registers or on the stack at different points which allows a debugger +such as gdb to more accurately construct stack back traces while +debugging the kernel. + +If the architecture that you are using supports the kernel option +``CONFIG_STRICT_KERNEL_RWX``, you should consider turning it off. This +option will prevent the use of software breakpoints because it marks +certain regions of the kernel's memory space as read-only. If kgdb +supports it for the architecture you are using, you can use hardware +breakpoints if you desire to run with the ``CONFIG_STRICT_KERNEL_RWX`` +option turned on, else you need to turn off this option. + +Next you should choose one of more I/O drivers to interconnect debugging +host and debugged target. Early boot debugging requires a KGDB I/O +driver that supports early debugging and the driver must be built into +the kernel directly. Kgdb I/O driver configuration takes place via +kernel or module parameters which you can learn more about in the in the +section that describes the parameter kgdboc. + +Here is an example set of ``.config`` symbols to enable or disable for kgdb:: + + # CONFIG_STRICT_KERNEL_RWX is not set + CONFIG_FRAME_POINTER=y + CONFIG_KGDB=y + CONFIG_KGDB_SERIAL_CONSOLE=y + +Kernel config options for kdb +----------------------------- + +Kdb is quite a bit more complex than the simple gdbstub sitting on top +of the kernel's debug core. Kdb must implement a shell, and also adds +some helper functions in other parts of the kernel, responsible for +printing out interesting data such as what you would see if you ran +``lsmod``, or ``ps``. In order to build kdb into the kernel you follow the +same steps as you would for kgdb. + +The main config option for kdb is ``CONFIG_KGDB_KDB`` which is called +:menuselection:`KGDB_KDB: include kdb frontend for kgdb` in the config menu. +In theory you would have already also selected an I/O driver such as the +``CONFIG_KGDB_SERIAL_CONSOLE`` interface if you plan on using kdb on a +serial port, when you were configuring kgdb. + +If you want to use a PS/2-style keyboard with kdb, you would select +``CONFIG_KDB_KEYBOARD`` which is called :menuselection:`KGDB_KDB: keyboard as +input device` in the config menu. The ``CONFIG_KDB_KEYBOARD`` option is not +used for anything in the gdb interface to kgdb. The ``CONFIG_KDB_KEYBOARD`` +option only works with kdb. + +Here is an example set of ``.config`` symbols to enable/disable kdb:: + + # CONFIG_STRICT_KERNEL_RWX is not set + CONFIG_FRAME_POINTER=y + CONFIG_KGDB=y + CONFIG_KGDB_SERIAL_CONSOLE=y + CONFIG_KGDB_KDB=y + CONFIG_KDB_KEYBOARD=y + +Kernel Debugger Boot Arguments +============================== + +This section describes the various runtime kernel parameters that affect +the configuration of the kernel debugger. The following chapter covers +using kdb and kgdb as well as providing some examples of the +configuration parameters. + +Kernel parameter: kgdboc +------------------------ + +The kgdboc driver was originally an abbreviation meant to stand for +"kgdb over console". Today it is the primary mechanism to configure how +to communicate from gdb to kgdb as well as the devices you want to use +to interact with the kdb shell. + +For kgdb/gdb, kgdboc is designed to work with a single serial port. It +is intended to cover the circumstance where you want to use a serial +console as your primary console as well as using it to perform kernel +debugging. It is also possible to use kgdb on a serial port which is not +designated as a system console. Kgdboc may be configured as a kernel +built-in or a kernel loadable module. You can only make use of +``kgdbwait`` and early debugging if you build kgdboc into the kernel as +a built-in. + +Optionally you can elect to activate kms (Kernel Mode Setting) +integration. When you use kms with kgdboc and you have a video driver +that has atomic mode setting hooks, it is possible to enter the debugger +on the graphics console. When the kernel execution is resumed, the +previous graphics mode will be restored. This integration can serve as a +useful tool to aid in diagnosing crashes or doing analysis of memory +with kdb while allowing the full graphics console applications to run. + +kgdboc arguments +~~~~~~~~~~~~~~~~ + +Usage:: + + kgdboc=[kms][[,]kbd][[,]serial_device][,baud] + +The order listed above must be observed if you use any of the optional +configurations together. + +Abbreviations: + +- kms = Kernel Mode Setting + +- kbd = Keyboard + +You can configure kgdboc to use the keyboard, and/or a serial device +depending on if you are using kdb and/or kgdb, in one of the following +scenarios. The order listed above must be observed if you use any of the +optional configurations together. Using kms + only gdb is generally not +a useful combination. + +Using loadable module or built-in +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +1. As a kernel built-in: + + Use the kernel boot argument:: + + kgdboc=<tty-device>,[baud] + +2. As a kernel loadable module: + + Use the command:: + + modprobe kgdboc kgdboc=<tty-device>,[baud] + + Here are two examples of how you might format the kgdboc string. The + first is for an x86 target using the first serial port. The second + example is for the ARM Versatile AB using the second serial port. + + 1. ``kgdboc=ttyS0,115200`` + + 2. ``kgdboc=ttyAMA1,115200`` + +Configure kgdboc at runtime with sysfs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +At run time you can enable or disable kgdboc by echoing a parameters +into the sysfs. Here are two examples: + +1. Enable kgdboc on ttyS0:: + + echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc + +2. Disable kgdboc:: + + echo "" > /sys/module/kgdboc/parameters/kgdboc + +.. note:: + + You do not need to specify the baud if you are configuring the + console on tty which is already configured or open. + +More examples +^^^^^^^^^^^^^ + +You can configure kgdboc to use the keyboard, and/or a serial device +depending on if you are using kdb and/or kgdb, in one of the following +scenarios. + +1. kdb and kgdb over only a serial port:: + + kgdboc=<serial_device>[,baud] + + Example:: + + kgdboc=ttyS0,115200 + +2. kdb and kgdb with keyboard and a serial port:: + + kgdboc=kbd,<serial_device>[,baud] + + Example:: + + kgdboc=kbd,ttyS0,115200 + +3. kdb with a keyboard:: + + kgdboc=kbd + +4. kdb with kernel mode setting:: + + kgdboc=kms,kbd + +5. kdb with kernel mode setting and kgdb over a serial port:: + + kgdboc=kms,kbd,ttyS0,115200 + +.. note:: + + Kgdboc does not support interrupting the target via the gdb remote + protocol. You must manually send a :kbd:`SysRq-G` unless you have a proxy + that splits console output to a terminal program. A console proxy has a + separate TCP port for the debugger and a separate TCP port for the + "human" console. The proxy can take care of sending the :kbd:`SysRq-G` + for you. + +When using kgdboc with no debugger proxy, you can end up connecting the +debugger at one of two entry points. If an exception occurs after you +have loaded kgdboc, a message should print on the console stating it is +waiting for the debugger. In this case you disconnect your terminal +program and then connect the debugger in its place. If you want to +interrupt the target system and forcibly enter a debug session you have +to issue a :kbd:`Sysrq` sequence and then type the letter :kbd:`g`. Then you +disconnect the terminal session and connect gdb. Your options if you +don't like this are to hack gdb to send the :kbd:`SysRq-G` for you as well as +on the initial connect, or to use a debugger proxy that allows an +unmodified gdb to do the debugging. + +Kernel parameter: ``kgdbwait`` +------------------------------ + +The Kernel command line option ``kgdbwait`` makes kgdb wait for a +debugger connection during booting of a kernel. You can only use this +option if you compiled a kgdb I/O driver into the kernel and you +specified the I/O driver configuration as a kernel command line option. +The kgdbwait parameter should always follow the configuration parameter +for the kgdb I/O driver in the kernel command line else the I/O driver +will not be configured prior to asking the kernel to use it to wait. + +The kernel will stop and wait as early as the I/O driver and +architecture allows when you use this option. If you build the kgdb I/O +driver as a loadable kernel module kgdbwait will not do anything. + +Kernel parameter: ``kgdbcon`` +----------------------------- + +The ``kgdbcon`` feature allows you to see :c:func:`printk` messages inside gdb +while gdb is connected to the kernel. Kdb does not make use of the kgdbcon +feature. + +Kgdb supports using the gdb serial protocol to send console messages to +the debugger when the debugger is connected and running. There are two +ways to activate this feature. + +1. Activate with the kernel command line option:: + + kgdbcon + +2. Use sysfs before configuring an I/O driver:: + + echo 1 > /sys/module/kgdb/parameters/kgdb_use_con + +.. note:: + + If you do this after you configure the kgdb I/O driver, the + setting will not take effect until the next point the I/O is + reconfigured. + +.. important:: + + You cannot use kgdboc + kgdbcon on a tty that is an + active system console. An example of incorrect usage is:: + + console=ttyS0,115200 kgdboc=ttyS0 kgdbcon + +It is possible to use this option with kgdboc on a tty that is not a +system console. + +Run time parameter: ``kgdbreboot`` +---------------------------------- + +The kgdbreboot feature allows you to change how the debugger deals with +the reboot notification. You have 3 choices for the behavior. The +default behavior is always set to 0. + +.. tabularcolumns:: |p{0.4cm}|p{11.5cm}|p{5.6cm}| + +.. flat-table:: + :widths: 1 10 8 + + * - 1 + - ``echo -1 > /sys/module/debug_core/parameters/kgdbreboot`` + - Ignore the reboot notification entirely. + + * - 2 + - ``echo 0 > /sys/module/debug_core/parameters/kgdbreboot`` + - Send the detach message to any attached debugger client. + + * - 3 + - ``echo 1 > /sys/module/debug_core/parameters/kgdbreboot`` + - Enter the debugger on reboot notify. + +Kernel parameter: ``nokaslr`` +----------------------------- + +If the architecture that you are using enable KASLR by default, +you should consider turning it off. KASLR randomizes the +virtual address where the kernel image is mapped and confuse +gdb which resolve kernel symbol address from symbol table +of vmlinux. + +Using kdb +========= + +Quick start for kdb on a serial port +------------------------------------ + +This is a quick example of how to use kdb. + +1. Configure kgdboc at boot using kernel parameters:: + + console=ttyS0,115200 kgdboc=ttyS0,115200 nokaslr + + OR + + Configure kgdboc after the kernel has booted; assuming you are using + a serial port console:: + + echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc + +2. Enter the kernel debugger manually or by waiting for an oops or + fault. There are several ways you can enter the kernel debugger + manually; all involve using the :kbd:`SysRq-G`, which means you must have + enabled ``CONFIG_MAGIC_SysRq=y`` in your kernel config. + + - When logged in as root or with a super user session you can run:: + + echo g > /proc/sysrq-trigger + + - Example using minicom 2.2 + + Press: :kbd:`CTRL-A` :kbd:`f` :kbd:`g` + + - When you have telneted to a terminal server that supports sending + a remote break + + Press: :kbd:`CTRL-]` + + Type in: ``send break`` + + Press: :kbd:`Enter` :kbd:`g` + +3. From the kdb prompt you can run the ``help`` command to see a complete + list of the commands that are available. + + Some useful commands in kdb include: + + =========== ================================================================= + ``lsmod`` Shows where kernel modules are loaded + ``ps`` Displays only the active processes + ``ps A`` Shows all the processes + ``summary`` Shows kernel version info and memory usage + ``bt`` Get a backtrace of the current process using :c:func:`dump_stack` + ``dmesg`` View the kernel syslog buffer + ``go`` Continue the system + =========== ================================================================= + +4. When you are done using kdb you need to consider rebooting the system + or using the ``go`` command to resuming normal kernel execution. If you + have paused the kernel for a lengthy period of time, applications + that rely on timely networking or anything to do with real wall clock + time could be adversely affected, so you should take this into + consideration when using the kernel debugger. + +Quick start for kdb using a keyboard connected console +------------------------------------------------------ + +This is a quick example of how to use kdb with a keyboard. + +1. Configure kgdboc at boot using kernel parameters:: + + kgdboc=kbd + + OR + + Configure kgdboc after the kernel has booted:: + + echo kbd > /sys/module/kgdboc/parameters/kgdboc + +2. Enter the kernel debugger manually or by waiting for an oops or + fault. There are several ways you can enter the kernel debugger + manually; all involve using the :kbd:`SysRq-G`, which means you must have + enabled ``CONFIG_MAGIC_SysRq=y`` in your kernel config. + + - When logged in as root or with a super user session you can run:: + + echo g > /proc/sysrq-trigger + + - Example using a laptop keyboard: + + Press and hold down: :kbd:`Alt` + + Press and hold down: :kbd:`Fn` + + Press and release the key with the label: :kbd:`SysRq` + + Release: :kbd:`Fn` + + Press and release: :kbd:`g` + + Release: :kbd:`Alt` + + - Example using a PS/2 101-key keyboard + + Press and hold down: :kbd:`Alt` + + Press and release the key with the label: :kbd:`SysRq` + + Press and release: :kbd:`g` + + Release: :kbd:`Alt` + +3. Now type in a kdb command such as ``help``, ``dmesg``, ``bt`` or ``go`` to + continue kernel execution. + +Using kgdb / gdb +================ + +In order to use kgdb you must activate it by passing configuration +information to one of the kgdb I/O drivers. If you do not pass any +configuration information kgdb will not do anything at all. Kgdb will +only actively hook up to the kernel trap hooks if a kgdb I/O driver is +loaded and configured. If you unconfigure a kgdb I/O driver, kgdb will +unregister all the kernel hook points. + +All kgdb I/O drivers can be reconfigured at run time, if +``CONFIG_SYSFS`` and ``CONFIG_MODULES`` are enabled, by echo'ing a new +config string to ``/sys/module/<driver>/parameter/<option>``. The driver +can be unconfigured by passing an empty string. You cannot change the +configuration while the debugger is attached. Make sure to detach the +debugger with the ``detach`` command prior to trying to unconfigure a +kgdb I/O driver. + +Connecting with gdb to a serial port +------------------------------------ + +1. Configure kgdboc + + Configure kgdboc at boot using kernel parameters:: + + kgdboc=ttyS0,115200 + + OR + + Configure kgdboc after the kernel has booted:: + + echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc + +2. Stop kernel execution (break into the debugger) + + In order to connect to gdb via kgdboc, the kernel must first be + stopped. There are several ways to stop the kernel which include + using kgdbwait as a boot argument, via a :kbd:`SysRq-G`, or running the + kernel until it takes an exception where it waits for the debugger to + attach. + + - When logged in as root or with a super user session you can run:: + + echo g > /proc/sysrq-trigger + + - Example using minicom 2.2 + + Press: :kbd:`CTRL-A` :kbd:`f` :kbd:`g` + + - When you have telneted to a terminal server that supports sending + a remote break + + Press: :kbd:`CTRL-]` + + Type in: ``send break`` + + Press: :kbd:`Enter` :kbd:`g` + +3. Connect from gdb + + Example (using a directly connected port):: + + % gdb ./vmlinux + (gdb) set remotebaud 115200 + (gdb) target remote /dev/ttyS0 + + + Example (kgdb to a terminal server on TCP port 2012):: + + % gdb ./vmlinux + (gdb) target remote 192.168.2.2:2012 + + + Once connected, you can debug a kernel the way you would debug an + application program. + + If you are having problems connecting or something is going seriously + wrong while debugging, it will most often be the case that you want + to enable gdb to be verbose about its target communications. You do + this prior to issuing the ``target remote`` command by typing in:: + + set debug remote 1 + +Remember if you continue in gdb, and need to "break in" again, you need +to issue an other :kbd:`SysRq-G`. It is easy to create a simple entry point by +putting a breakpoint at ``sys_sync`` and then you can run ``sync`` from a +shell or script to break into the debugger. + +kgdb and kdb interoperability +============================= + +It is possible to transition between kdb and kgdb dynamically. The debug +core will remember which you used the last time and automatically start +in the same mode. + +Switching between kdb and kgdb +------------------------------ + +Switching from kgdb to kdb +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +There are two ways to switch from kgdb to kdb: you can use gdb to issue +a maintenance packet, or you can blindly type the command ``$3#33``. +Whenever the kernel debugger stops in kgdb mode it will print the +message ``KGDB or $3#33 for KDB``. It is important to note that you have +to type the sequence correctly in one pass. You cannot type a backspace +or delete because kgdb will interpret that as part of the debug stream. + +1. Change from kgdb to kdb by blindly typing:: + + $3#33 + +2. Change from kgdb to kdb with gdb:: + + maintenance packet 3 + + .. note:: + + Now you must kill gdb. Typically you press :kbd:`CTRL-Z` and issue + the command:: + + kill -9 % + +Change from kdb to kgdb +~~~~~~~~~~~~~~~~~~~~~~~ + +There are two ways you can change from kdb to kgdb. You can manually +enter kgdb mode by issuing the kgdb command from the kdb shell prompt, +or you can connect gdb while the kdb shell prompt is active. The kdb +shell looks for the typical first commands that gdb would issue with the +gdb remote protocol and if it sees one of those commands it +automatically changes into kgdb mode. + +1. From kdb issue the command:: + + kgdb + + Now disconnect your terminal program and connect gdb in its place + +2. At the kdb prompt, disconnect the terminal program and connect gdb in + its place. + +Running kdb commands from gdb +----------------------------- + +It is possible to run a limited set of kdb commands from gdb, using the +gdb monitor command. You don't want to execute any of the run control or +breakpoint operations, because it can disrupt the state of the kernel +debugger. You should be using gdb for breakpoints and run control +operations if you have gdb connected. The more useful commands to run +are things like lsmod, dmesg, ps or possibly some of the memory +information commands. To see all the kdb commands you can run +``monitor help``. + +Example:: + + (gdb) monitor ps + 1 idle process (state I) and + 27 sleeping system daemon (state M) processes suppressed, + use 'ps A' to see all. + Task Addr Pid Parent [*] cpu State Thread Command + + 0xc78291d0 1 0 0 0 S 0xc7829404 init + 0xc7954150 942 1 0 0 S 0xc7954384 dropbear + 0xc78789c0 944 1 0 0 S 0xc7878bf4 sh + (gdb) + +kgdb Test Suite +=============== + +When kgdb is enabled in the kernel config you can also elect to enable +the config parameter ``KGDB_TESTS``. Turning this on will enable a special +kgdb I/O module which is designed to test the kgdb internal functions. + +The kgdb tests are mainly intended for developers to test the kgdb +internals as well as a tool for developing a new kgdb architecture +specific implementation. These tests are not really for end users of the +Linux kernel. The primary source of documentation would be to look in +the ``drivers/misc/kgdbts.c`` file. + +The kgdb test suite can also be configured at compile time to run the +core set of tests by setting the kernel config parameter +``KGDB_TESTS_ON_BOOT``. This particular option is aimed at automated +regression testing and does not require modifying the kernel boot config +arguments. If this is turned on, the kgdb test suite can be disabled by +specifying ``kgdbts=`` as a kernel boot argument. + +Kernel Debugger Internals +========================= + +Architecture Specifics +---------------------- + +The kernel debugger is organized into a number of components: + +1. The debug core + + The debug core is found in ``kernel/debugger/debug_core.c``. It + contains: + + - A generic OS exception handler which includes sync'ing the + processors into a stopped state on an multi-CPU system. + + - The API to talk to the kgdb I/O drivers + + - The API to make calls to the arch-specific kgdb implementation + + - The logic to perform safe memory reads and writes to memory while + using the debugger + + - A full implementation for software breakpoints unless overridden + by the arch + + - The API to invoke either the kdb or kgdb frontend to the debug + core. + + - The structures and callback API for atomic kernel mode setting. + + .. note:: kgdboc is where the kms callbacks are invoked. + +2. kgdb arch-specific implementation + + This implementation is generally found in ``arch/*/kernel/kgdb.c``. As + an example, ``arch/x86/kernel/kgdb.c`` contains the specifics to + implement HW breakpoint as well as the initialization to dynamically + register and unregister for the trap handlers on this architecture. + The arch-specific portion implements: + + - contains an arch-specific trap catcher which invokes + :c:func:`kgdb_handle_exception` to start kgdb about doing its work + + - translation to and from gdb specific packet format to :c:type:`pt_regs` + + - Registration and unregistration of architecture specific trap + hooks + + - Any special exception handling and cleanup + + - NMI exception handling and cleanup + + - (optional) HW breakpoints + +3. gdbstub frontend (aka kgdb) + + The gdbstub is located in ``kernel/debug/gdbstub.c``. It contains: + + - All the logic to implement the gdb serial protocol + +4. kdb frontend + + The kdb debugger shell is broken down into a number of components. + The kdb core is located in kernel/debug/kdb. There are a number of + helper functions in some of the other kernel components to make it + possible for kdb to examine and report information about the kernel + without taking locks that could cause a kernel deadlock. The kdb core + contains implements the following functionality. + + - A simple shell + + - The kdb core command set + + - A registration API to register additional kdb shell commands. + + - A good example of a self-contained kdb module is the ``ftdump`` + command for dumping the ftrace buffer. See: + ``kernel/trace/trace_kdb.c`` + + - For an example of how to dynamically register a new kdb command + you can build the kdb_hello.ko kernel module from + ``samples/kdb/kdb_hello.c``. To build this example you can set + ``CONFIG_SAMPLES=y`` and ``CONFIG_SAMPLE_KDB=m`` in your kernel + config. Later run ``modprobe kdb_hello`` and the next time you + enter the kdb shell, you can run the ``hello`` command. + + - The implementation for :c:func:`kdb_printf` which emits messages directly + to I/O drivers, bypassing the kernel log. + + - SW / HW breakpoint management for the kdb shell + +5. kgdb I/O driver + + Each kgdb I/O driver has to provide an implementation for the + following: + + - configuration via built-in or module + + - dynamic configuration and kgdb hook registration calls + + - read and write character interface + + - A cleanup handler for unconfiguring from the kgdb core + + - (optional) Early debug methodology + + Any given kgdb I/O driver has to operate very closely with the + hardware and must do it in such a way that does not enable interrupts + or change other parts of the system context without completely + restoring them. The kgdb core will repeatedly "poll" a kgdb I/O + driver for characters when it needs input. The I/O driver is expected + to return immediately if there is no data available. Doing so allows + for the future possibility to touch watchdog hardware in such a way + as to have a target system not reset when these are enabled. + +If you are intent on adding kgdb architecture specific support for a new +architecture, the architecture should define ``HAVE_ARCH_KGDB`` in the +architecture specific Kconfig file. This will enable kgdb for the +architecture, and at that point you must create an architecture specific +kgdb implementation. + +There are a few flags which must be set on every architecture in their +``asm/kgdb.h`` file. These are: + +- ``NUMREGBYTES``: + The size in bytes of all of the registers, so that we + can ensure they will all fit into a packet. + +- ``BUFMAX``: + The size in bytes of the buffer GDB will read into. This must + be larger than NUMREGBYTES. + +- ``CACHE_FLUSH_IS_SAFE``: + Set to 1 if it is always safe to call + flush_cache_range or flush_icache_range. On some architectures, + these functions may not be safe to call on SMP since we keep other + CPUs in a holding pattern. + +There are also the following functions for the common backend, found in +``kernel/kgdb.c``, that must be supplied by the architecture-specific +backend unless marked as (optional), in which case a default function +maybe used if the architecture does not need to provide a specific +implementation. + +.. kernel-doc:: include/linux/kgdb.h + :internal: + +kgdboc internals +---------------- + +kgdboc and uarts +~~~~~~~~~~~~~~~~ + +The kgdboc driver is actually a very thin driver that relies on the +underlying low level to the hardware driver having "polling hooks" to +which the tty driver is attached. In the initial implementation of +kgdboc the serial_core was changed to expose a low level UART hook for +doing polled mode reading and writing of a single character while in an +atomic context. When kgdb makes an I/O request to the debugger, kgdboc +invokes a callback in the serial core which in turn uses the callback in +the UART driver. + +When using kgdboc with a UART, the UART driver must implement two +callbacks in the :c:type:`struct uart_ops <uart_ops>`. +Example from ``drivers/8250.c``:: + + + #ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, + #endif + + +Any implementation specifics around creating a polling driver use the +``#ifdef CONFIG_CONSOLE_POLL``, as shown above. Keep in mind that +polling hooks have to be implemented in such a way that they can be +called from an atomic context and have to restore the state of the UART +chip on return such that the system can return to normal when the +debugger detaches. You need to be very careful with any kind of lock you +consider, because failing here is most likely going to mean pressing the +reset button. + +kgdboc and keyboards +~~~~~~~~~~~~~~~~~~~~~~~~ + +The kgdboc driver contains logic to configure communications with an +attached keyboard. The keyboard infrastructure is only compiled into the +kernel when ``CONFIG_KDB_KEYBOARD=y`` is set in the kernel configuration. + +The core polled keyboard driver driver for PS/2 type keyboards is in +``drivers/char/kdb_keyboard.c``. This driver is hooked into the debug core +when kgdboc populates the callback in the array called +:c:type:`kdb_poll_funcs[]`. The :c:func:`kdb_get_kbd_char` is the top-level +function which polls hardware for single character input. + +kgdboc and kms +~~~~~~~~~~~~~~~~~~ + +The kgdboc driver contains logic to request the graphics display to +switch to a text context when you are using ``kgdboc=kms,kbd``, provided +that you have a video driver which has a frame buffer console and atomic +kernel mode setting support. + +Every time the kernel debugger is entered it calls +:c:func:`kgdboc_pre_exp_handler` which in turn calls :c:func:`con_debug_enter` +in the virtual console layer. On resuming kernel execution, the kernel +debugger calls :c:func:`kgdboc_post_exp_handler` which in turn calls +:c:func:`con_debug_leave`. + +Any video driver that wants to be compatible with the kernel debugger +and the atomic kms callbacks must implement the ``mode_set_base_atomic``, +``fb_debug_enter`` and ``fb_debug_leave operations``. For the +``fb_debug_enter`` and ``fb_debug_leave`` the option exists to use the +generic drm fb helper functions or implement something custom for the +hardware. The following example shows the initialization of the +.mode_set_base_atomic operation in +drivers/gpu/drm/i915/intel_display.c:: + + + static const struct drm_crtc_helper_funcs intel_helper_funcs = { + [...] + .mode_set_base_atomic = intel_pipe_set_base_atomic, + [...] + }; + + +Here is an example of how the i915 driver initializes the +fb_debug_enter and fb_debug_leave functions to use the generic drm +helpers in ``drivers/gpu/drm/i915/intel_fb.c``:: + + + static struct fb_ops intelfb_ops = { + [...] + .fb_debug_enter = drm_fb_helper_debug_enter, + .fb_debug_leave = drm_fb_helper_debug_leave, + [...] + }; + + +Credits +======= + +The following people have contributed to this document: + +1. Amit Kale <amitkale@linsyssoft.com> + +2. Tom Rini <trini@kernel.crashing.org> + +In March 2008 this document was completely rewritten by: + +- Jason Wessel <jason.wessel@windriver.com> + +In Jan 2010 this document was updated to include kdb. + +- Jason Wessel <jason.wessel@windriver.com> diff --git a/Documentation/dev-tools/kmemleak.rst b/Documentation/dev-tools/kmemleak.rst new file mode 100644 index 000000000..e6f51260f --- /dev/null +++ b/Documentation/dev-tools/kmemleak.rst @@ -0,0 +1,220 @@ +Kernel Memory Leak Detector +=========================== + +Kmemleak provides a way of detecting possible kernel memory leaks in a +way similar to a tracing garbage collector +(https://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors), +with the difference that the orphan objects are not freed but only +reported via /sys/kernel/debug/kmemleak. A similar method is used by the +Valgrind tool (``memcheck --leak-check``) to detect the memory leaks in +user-space applications. +Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze, ppc, mips, s390 and tile. + +Usage +----- + +CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel +thread scans the memory every 10 minutes (by default) and prints the +number of new unreferenced objects found. To display the details of all +the possible memory leaks:: + + # mount -t debugfs nodev /sys/kernel/debug/ + # cat /sys/kernel/debug/kmemleak + +To trigger an intermediate memory scan:: + + # echo scan > /sys/kernel/debug/kmemleak + +To clear the list of all current possible memory leaks:: + + # echo clear > /sys/kernel/debug/kmemleak + +New leaks will then come up upon reading ``/sys/kernel/debug/kmemleak`` +again. + +Note that the orphan objects are listed in the order they were allocated +and one object at the beginning of the list may cause other subsequent +objects to be reported as orphan. + +Memory scanning parameters can be modified at run-time by writing to the +``/sys/kernel/debug/kmemleak`` file. The following parameters are supported: + +- off + disable kmemleak (irreversible) +- stack=on + enable the task stacks scanning (default) +- stack=off + disable the tasks stacks scanning +- scan=on + start the automatic memory scanning thread (default) +- scan=off + stop the automatic memory scanning thread +- scan=<secs> + set the automatic memory scanning period in seconds + (default 600, 0 to stop the automatic scanning) +- scan + trigger a memory scan +- clear + clear list of current memory leak suspects, done by + marking all current reported unreferenced objects grey, + or free all kmemleak objects if kmemleak has been disabled. +- dump=<addr> + dump information about the object found at <addr> + +Kmemleak can also be disabled at boot-time by passing ``kmemleak=off`` on +the kernel command line. + +Memory may be allocated or freed before kmemleak is initialised and +these actions are stored in an early log buffer. The size of this buffer +is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option. + +If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is +disabled by default. Passing ``kmemleak=on`` on the kernel command +line enables the function. + +Basic Algorithm +--------------- + +The memory allocations via :c:func:`kmalloc`, :c:func:`vmalloc`, +:c:func:`kmem_cache_alloc` and +friends are traced and the pointers, together with additional +information like size and stack trace, are stored in a rbtree. +The corresponding freeing function calls are tracked and the pointers +removed from the kmemleak data structures. + +An allocated block of memory is considered orphan if no pointer to its +start address or to any location inside the block can be found by +scanning the memory (including saved registers). This means that there +might be no way for the kernel to pass the address of the allocated +block to a freeing function and therefore the block is considered a +memory leak. + +The scanning algorithm steps: + + 1. mark all objects as white (remaining white objects will later be + considered orphan) + 2. scan the memory starting with the data section and stacks, checking + the values against the addresses stored in the rbtree. If + a pointer to a white object is found, the object is added to the + gray list + 3. scan the gray objects for matching addresses (some white objects + can become gray and added at the end of the gray list) until the + gray set is finished + 4. the remaining white objects are considered orphan and reported via + /sys/kernel/debug/kmemleak + +Some allocated memory blocks have pointers stored in the kernel's +internal data structures and they cannot be detected as orphans. To +avoid this, kmemleak can also store the number of values pointing to an +address inside the block address range that need to be found so that the +block is not considered a leak. One example is __vmalloc(). + +Testing specific sections with kmemleak +--------------------------------------- + +Upon initial bootup your /sys/kernel/debug/kmemleak output page may be +quite extensive. This can also be the case if you have very buggy code +when doing development. To work around these situations you can use the +'clear' command to clear all reported unreferenced objects from the +/sys/kernel/debug/kmemleak output. By issuing a 'scan' after a 'clear' +you can find new unreferenced objects; this should help with testing +specific sections of code. + +To test a critical section on demand with a clean kmemleak do:: + + # echo clear > /sys/kernel/debug/kmemleak + ... test your kernel or modules ... + # echo scan > /sys/kernel/debug/kmemleak + +Then as usual to get your report with:: + + # cat /sys/kernel/debug/kmemleak + +Freeing kmemleak internal objects +--------------------------------- + +To allow access to previously found memory leaks after kmemleak has been +disabled by the user or due to an fatal error, internal kmemleak objects +won't be freed when kmemleak is disabled, and those objects may occupy +a large part of physical memory. + +In this situation, you may reclaim memory with:: + + # echo clear > /sys/kernel/debug/kmemleak + +Kmemleak API +------------ + +See the include/linux/kmemleak.h header for the functions prototype. + +- ``kmemleak_init`` - initialize kmemleak +- ``kmemleak_alloc`` - notify of a memory block allocation +- ``kmemleak_alloc_percpu`` - notify of a percpu memory block allocation +- ``kmemleak_vmalloc`` - notify of a vmalloc() memory allocation +- ``kmemleak_free`` - notify of a memory block freeing +- ``kmemleak_free_part`` - notify of a partial memory block freeing +- ``kmemleak_free_percpu`` - notify of a percpu memory block freeing +- ``kmemleak_update_trace`` - update object allocation stack trace +- ``kmemleak_not_leak`` - mark an object as not a leak +- ``kmemleak_ignore`` - do not scan or report an object as leak +- ``kmemleak_scan_area`` - add scan areas inside a memory block +- ``kmemleak_no_scan`` - do not scan a memory block +- ``kmemleak_erase`` - erase an old value in a pointer variable +- ``kmemleak_alloc_recursive`` - as kmemleak_alloc but checks the recursiveness +- ``kmemleak_free_recursive`` - as kmemleak_free but checks the recursiveness + +The following functions take a physical address as the object pointer +and only perform the corresponding action if the address has a lowmem +mapping: + +- ``kmemleak_alloc_phys`` +- ``kmemleak_free_part_phys`` +- ``kmemleak_not_leak_phys`` +- ``kmemleak_ignore_phys`` + +Dealing with false positives/negatives +-------------------------------------- + +The false negatives are real memory leaks (orphan objects) but not +reported by kmemleak because values found during the memory scanning +point to such objects. To reduce the number of false negatives, kmemleak +provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and +kmemleak_erase functions (see above). The task stacks also increase the +amount of false negatives and their scanning is not enabled by default. + +The false positives are objects wrongly reported as being memory leaks +(orphan). For objects known not to be leaks, kmemleak provides the +kmemleak_not_leak function. The kmemleak_ignore could also be used if +the memory block is known not to contain other pointers and it will no +longer be scanned. + +Some of the reported leaks are only transient, especially on SMP +systems, because of pointers temporarily stored in CPU registers or +stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing +the minimum age of an object to be reported as a memory leak. + +Limitations and Drawbacks +------------------------- + +The main drawback is the reduced performance of memory allocation and +freeing. To avoid other penalties, the memory scanning is only performed +when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is +intended for debugging purposes where the performance might not be the +most important requirement. + +To keep the algorithm simple, kmemleak scans for values pointing to any +address inside a block's address range. This may lead to an increased +number of false negatives. However, it is likely that a real memory leak +will eventually become visible. + +Another source of false negatives is the data stored in non-pointer +values. In a future version, kmemleak could only scan the pointer +members in the allocated structures. This feature would solve many of +the false negative cases described above. + +The tool can report false positives. These are cases where an allocated +block doesn't need to be freed (some cases in the init_call functions), +the pointer is calculated by other methods than the usual container_of +macro or the pointer is stored in a location not scanned by kmemleak. + +Page allocations and ioremap are not tracked. diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst new file mode 100644 index 000000000..6f653acea --- /dev/null +++ b/Documentation/dev-tools/kselftest.rst @@ -0,0 +1,195 @@ +====================== +Linux Kernel Selftests +====================== + +The kernel contains a set of "self tests" under the tools/testing/selftests/ +directory. These are intended to be small tests to exercise individual code +paths in the kernel. Tests are intended to be run after building, installing +and booting a kernel. + +On some systems, hot-plug tests could hang forever waiting for cpu and +memory to be ready to be offlined. A special hot-plug target is created +to run full range of hot-plug tests. In default mode, hot-plug tests run +in safe mode with a limited scope. In limited mode, cpu-hotplug test is +run on a single cpu as opposed to all hotplug capable cpus, and memory +hotplug test is run on 2% of hotplug capable memory instead of 10%. + +Running the selftests (hotplug tests are run in limited mode) +============================================================= + +To build the tests:: + + $ make -C tools/testing/selftests + +To run the tests:: + + $ make -C tools/testing/selftests run_tests + +To build and run the tests with a single command, use:: + + $ make kselftest + +Note that some tests will require root privileges. + +Build and run from user specific object directory (make O=dir):: + + $ make O=/tmp/kselftest kselftest + +Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: + + $ make KBUILD_OUTPUT=/tmp/kselftest kselftest + +The above commands run the tests and print pass/fail summary to make it +easier to understand the test results. Please find the detailed individual +test results for each test in /tmp/testname file(s). + +Running a subset of selftests +============================= + +You can use the "TARGETS" variable on the make command line to specify +single test to run, or a list of tests to run. + +To run only tests targeted for a single subsystem:: + + $ make -C tools/testing/selftests TARGETS=ptrace run_tests + +You can specify multiple tests to build and run:: + + $ make TARGETS="size timers" kselftest + +Build and run from user specific object directory (make O=dir):: + + $ make O=/tmp/kselftest TARGETS="size timers" kselftest + +Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=):: + + $ make KBUILD_OUTPUT=/tmp/kselftest TARGETS="size timers" kselftest + +The above commands run the tests and print pass/fail summary to make it +easier to understand the test results. Please find the detailed individual +test results for each test in /tmp/testname file(s). + +See the top-level tools/testing/selftests/Makefile for the list of all +possible targets. + +Running the full range hotplug selftests +======================================== + +To build the hotplug tests:: + + $ make -C tools/testing/selftests hotplug + +To run the hotplug tests:: + + $ make -C tools/testing/selftests run_hotplug + +Note that some tests will require root privileges. + + +Install selftests +================= + +You can use kselftest_install.sh tool installs selftests in default +location which is tools/testing/selftests/kselftest or a user specified +location. + +To install selftests in default location:: + + $ cd tools/testing/selftests + $ ./kselftest_install.sh + +To install selftests in a user specified location:: + + $ cd tools/testing/selftests + $ ./kselftest_install.sh install_dir + +Running installed selftests +=========================== + +Kselftest install as well as the Kselftest tarball provide a script +named "run_kselftest.sh" to run the tests. + +You can simply do the following to run the installed Kselftests. Please +note some tests will require root privileges:: + + $ cd kselftest + $ ./run_kselftest.sh + +Contributing new tests +====================== + +In general, the rules for selftests are + + * Do as much as you can if you're not root; + + * Don't take too long; + + * Don't break the build on any architecture, and + + * Don't cause the top-level "make run_tests" to fail if your feature is + unconfigured. + +Contributing new tests (details) +================================ + + * Use TEST_GEN_XXX if such binaries or files are generated during + compiling. + + TEST_PROGS, TEST_GEN_PROGS mean it is the executable tested by + default. + + TEST_CUSTOM_PROGS should be used by tests that require custom build + rule and prevent common build rule use. + + TEST_PROGS are for test shell scripts. Please ensure shell script has + its exec bit set. Otherwise, lib.mk run_tests will generate a warning. + + TEST_CUSTOM_PROGS and TEST_PROGS will be run by common run_tests. + + TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the + executable which is not tested by default. + TEST_FILES, TEST_GEN_FILES mean it is the file which is used by + test. + + * First use the headers inside the kernel source and/or git repo, and then the + system headers. Headers for the kernel release as opposed to headers + installed by the distro on the system should be the primary focus to be able + to find regressions. + + * If a test needs specific kernel config options enabled, add a config file in + the test directory to enable them. + + e.g: tools/testing/selftests/android/ion/config + +Test Harness +============ + +The kselftest_harness.h file contains useful helpers to build tests. The tests +from tools/testing/selftests/seccomp/seccomp_bpf.c can be used as example. + +Example +------- + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :doc: example + + +Helpers +------- + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :functions: TH_LOG TEST TEST_SIGNAL FIXTURE FIXTURE_DATA FIXTURE_SETUP + FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN + +Operators +--------- + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :doc: operators + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :functions: ASSERT_EQ ASSERT_NE ASSERT_LT ASSERT_LE ASSERT_GT ASSERT_GE + ASSERT_NULL ASSERT_TRUE ASSERT_NULL ASSERT_TRUE ASSERT_FALSE + ASSERT_STREQ ASSERT_STRNE EXPECT_EQ EXPECT_NE EXPECT_LT + EXPECT_LE EXPECT_GT EXPECT_GE EXPECT_NULL EXPECT_TRUE + EXPECT_FALSE EXPECT_STREQ EXPECT_STRNE diff --git a/Documentation/dev-tools/sparse.rst b/Documentation/dev-tools/sparse.rst new file mode 100644 index 000000000..c401c952a --- /dev/null +++ b/Documentation/dev-tools/sparse.rst @@ -0,0 +1,105 @@ +.. Copyright 2004 Linus Torvalds +.. Copyright 2004 Pavel Machek <pavel@ucw.cz> +.. Copyright 2006 Bob Copeland <me@bobcopeland.com> + +Sparse +====== + +Sparse is a semantic checker for C programs; it can be used to find a +number of potential problems with kernel code. See +https://lwn.net/Articles/689907/ for an overview of sparse; this document +contains some kernel-specific sparse information. + + +Using sparse for typechecking +----------------------------- + +"__bitwise" is a type attribute, so you have to do something like this:: + + typedef int __bitwise pm_request_t; + + enum pm_request { + PM_SUSPEND = (__force pm_request_t) 1, + PM_RESUME = (__force pm_request_t) 2 + }; + +which makes PM_SUSPEND and PM_RESUME "bitwise" integers (the "__force" is +there because sparse will complain about casting to/from a bitwise type, +but in this case we really _do_ want to force the conversion). And because +the enum values are all the same type, now "enum pm_request" will be that +type too. + +And with gcc, all the "__bitwise"/"__force stuff" goes away, and it all +ends up looking just like integers to gcc. + +Quite frankly, you don't need the enum there. The above all really just +boils down to one special "int __bitwise" type. + +So the simpler way is to just do:: + + typedef int __bitwise pm_request_t; + + #define PM_SUSPEND ((__force pm_request_t) 1) + #define PM_RESUME ((__force pm_request_t) 2) + +and you now have all the infrastructure needed for strict typechecking. + +One small note: the constant integer "0" is special. You can use a +constant zero as a bitwise integer type without sparse ever complaining. +This is because "bitwise" (as the name implies) was designed for making +sure that bitwise types don't get mixed up (little-endian vs big-endian +vs cpu-endian vs whatever), and there the constant "0" really _is_ +special. + +Using sparse for lock checking +------------------------------ + +The following macros are undefined for gcc and defined during a sparse +run to use the "context" tracking feature of sparse, applied to +locking. These annotations tell sparse when a lock is held, with +regard to the annotated function's entry and exit. + +__must_hold - The specified lock is held on function entry and exit. + +__acquires - The specified lock is held on function exit, but not entry. + +__releases - The specified lock is held on function entry, but not exit. + +If the function enters and exits without the lock held, acquiring and +releasing the lock inside the function in a balanced way, no +annotation is needed. The three annotations above are for cases where +sparse would otherwise report a context imbalance. + +Getting sparse +-------------- + +You can get latest released versions from the Sparse homepage at +https://sparse.wiki.kernel.org/index.php/Main_Page + +Alternatively, you can get snapshots of the latest development version +of sparse using git to clone:: + + git://git.kernel.org/pub/scm/devel/sparse/sparse.git + +DaveJ has hourly generated tarballs of the git tree available at:: + + http://www.codemonkey.org.uk/projects/git-snapshots/sparse/ + + +Once you have it, just do:: + + make + make install + +as a regular user, and it will install sparse in your ~/bin directory. + +Using sparse +------------ + +Do a kernel make with "make C=1" to run sparse on all the C files that get +recompiled, or use "make C=2" to run sparse on the files whether they need to +be recompiled or not. The latter is a fast way to check the whole tree if you +have already built it. + +The optional make variable CF can be used to pass arguments to sparse. The +build system passes -Wbitwise to sparse automatically. diff --git a/Documentation/dev-tools/ubsan.rst b/Documentation/dev-tools/ubsan.rst new file mode 100644 index 000000000..655e6b63c --- /dev/null +++ b/Documentation/dev-tools/ubsan.rst @@ -0,0 +1,88 @@ +The Undefined Behavior Sanitizer - UBSAN +======================================== + +UBSAN is a runtime undefined behaviour checker. + +UBSAN uses compile-time instrumentation to catch undefined behavior (UB). +Compiler inserts code that perform certain kinds of checks before operations +that may cause UB. If check fails (i.e. UB detected) __ubsan_handle_* +function called to print error message. + +GCC has that feature since 4.9.x [1_] (see ``-fsanitize=undefined`` option and +its suboptions). GCC 5.x has more checkers implemented [2_]. + +Report example +-------------- + +:: + + ================================================================================ + UBSAN: Undefined behaviour in ../include/linux/bitops.h:110:33 + shift exponent 32 is to large for 32-bit type 'unsigned int' + CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.0-rc1+ #26 + 0000000000000000 ffffffff82403cc8 ffffffff815e6cd6 0000000000000001 + ffffffff82403cf8 ffffffff82403ce0 ffffffff8163a5ed 0000000000000020 + ffffffff82403d78 ffffffff8163ac2b ffffffff815f0001 0000000000000002 + Call Trace: + [<ffffffff815e6cd6>] dump_stack+0x45/0x5f + [<ffffffff8163a5ed>] ubsan_epilogue+0xd/0x40 + [<ffffffff8163ac2b>] __ubsan_handle_shift_out_of_bounds+0xeb/0x130 + [<ffffffff815f0001>] ? radix_tree_gang_lookup_slot+0x51/0x150 + [<ffffffff8173c586>] _mix_pool_bytes+0x1e6/0x480 + [<ffffffff83105653>] ? dmi_walk_early+0x48/0x5c + [<ffffffff8173c881>] add_device_randomness+0x61/0x130 + [<ffffffff83105b35>] ? dmi_save_one_device+0xaa/0xaa + [<ffffffff83105653>] dmi_walk_early+0x48/0x5c + [<ffffffff831066ae>] dmi_scan_machine+0x278/0x4b4 + [<ffffffff8111d58a>] ? vprintk_default+0x1a/0x20 + [<ffffffff830ad120>] ? early_idt_handler_array+0x120/0x120 + [<ffffffff830b2240>] setup_arch+0x405/0xc2c + [<ffffffff830ad120>] ? early_idt_handler_array+0x120/0x120 + [<ffffffff830ae053>] start_kernel+0x83/0x49a + [<ffffffff830ad120>] ? early_idt_handler_array+0x120/0x120 + [<ffffffff830ad386>] x86_64_start_reservations+0x2a/0x2c + [<ffffffff830ad4f3>] x86_64_start_kernel+0x16b/0x17a + ================================================================================ + +Usage +----- + +To enable UBSAN configure kernel with:: + + CONFIG_UBSAN=y + +and to check the entire kernel:: + + CONFIG_UBSAN_SANITIZE_ALL=y + +To enable instrumentation for specific files or directories, add a line +similar to the following to the respective kernel Makefile: + +- For a single file (e.g. main.o):: + + UBSAN_SANITIZE_main.o := y + +- For all files in one directory:: + + UBSAN_SANITIZE := y + +To exclude files from being instrumented even if +``CONFIG_UBSAN_SANITIZE_ALL=y``, use:: + + UBSAN_SANITIZE_main.o := n + +and:: + + UBSAN_SANITIZE := n + +Detection of unaligned accesses controlled through the separate option - +CONFIG_UBSAN_ALIGNMENT. It's off by default on architectures that support +unaligned accesses (CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y). One could +still enable it in config, just note that it will produce a lot of UBSAN +reports. + +References +---------- + +.. _1: https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html +.. _2: https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html |