1 files changed, 55 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
new file mode 100644
index 000000000..3a8805280
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -0,0 +1,55 @@
+* Amlogic GXBB AO Clock and Reset Unit
+
+The Amlogic GXBB AO clock controller generates and supplies clock to various
+controllers within the Always-On part of the SoC.
+
+Required Properties:
+
+- compatible: value should be different for each SoC family as :
+	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
+	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
+	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+	- AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
+	followed by the common "amlogic,meson-gx-aoclkc"
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+- #reset-cells: should be 1.
+
+Each reset is assigned an identifier and client nodes can use this identifier
+to specify the reset which they consume. All available resets are defined as
+preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
+Example: AO Clock controller node:
+
+ao_sysctrl: sys-ctrl@0 {
+	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+	reg =  <0x0 0x0 0x0 0x100>;
+
+	clkc_AO: clock-controller {
+		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+};
+
+Example: UART controller node that consumes the clock and reset generated
+  by the clock controller:
+
+	uart_AO: serial@4c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0x4c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc_AO CLKID_AO_UART1>;
+		resets = <&clkc_AO RESET_AO_UART1>;
+	};