1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
new file mode 100644
index 000000000..f8d4134ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
@@ -0,0 +1,53 @@
+Ingenic SoC CGU binding
+
+The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+typically includes a variety of PLLs, multiplexers, dividers & gates in order
+to provide many different clock signals derived from only 2 external source
+clocks.
+
+Required properties:
+- compatible : Should be "ingenic,<soctype>-cgu".
+  For example "ingenic,jz4740-cgu" or "ingenic,jz4780-cgu".
+- reg : The address & length of the CGU registers.
+- clocks : List of phandle & clock specifiers for clocks external to the CGU.
+  Two such external clocks should be specified - first the external crystal
+  "ext" and second the RTC clock source "rtc".
+- clock-names : List of name strings for the external clocks.
+- #clock-cells: Should be 1.
+  Clock consumers specify this argument to identify a clock. The valid values
+  may be found in <dt-bindings/clock/<soctype>-cgu.h>.
+
+Example SoC include file:
+
+/ {
+	cgu: jz4740-cgu {
+		compatible = "ingenic,jz4740-cgu";
+		reg = <0x10000000 0x100>;
+		#clock-cells = <1>;
+	};
+
+	uart0: serial@10030000 {
+		clocks = <&cgu JZ4740_CLK_UART0>;
+	};
+};
+
+Example board file:
+
+/ {
+	ext: clock@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	rtc: clock@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	&cgu {
+		clocks = <&ext> <&rtc>;
+		clock-names: "ext", "rtc";
+	};
+};