diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt new file mode 100644 index 000000000..946229c48 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -0,0 +1,112 @@ +* Renesas R-Car (RZ/G) DMA Controller Device Tree bindings + +Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA +controller instances named DMAC capable of serving multiple clients. Channels +can be dedicated to specific clients or shared between a large number of +clients. + +Each DMA client is connected to one dedicated port of the DMAC, identified by +an 8-bit port number called the MID/RID. A DMA controller can thus serve up to +256 clients in total. When the number of hardware channels is lower than the +number of clients to be served, channels must be shared between multiple DMA +clients. The association of DMA clients to DMAC channels is fully dynamic and +not described in these device tree bindings. + +Required Properties: + +- compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback. + Examples with soctypes are: + - "renesas,dmac-r8a7743" (RZ/G1M) + - "renesas,dmac-r8a7745" (RZ/G1E) + - "renesas,dmac-r8a77470" (RZ/G1C) + - "renesas,dmac-r8a7790" (R-Car H2) + - "renesas,dmac-r8a7791" (R-Car M2-W) + - "renesas,dmac-r8a7792" (R-Car V2H) + - "renesas,dmac-r8a7793" (R-Car M2-N) + - "renesas,dmac-r8a7794" (R-Car E2) + - "renesas,dmac-r8a7795" (R-Car H3) + - "renesas,dmac-r8a7796" (R-Car M3-W) + - "renesas,dmac-r8a77965" (R-Car M3-N) + - "renesas,dmac-r8a77970" (R-Car V3M) + - "renesas,dmac-r8a77980" (R-Car V3H) + - "renesas,dmac-r8a77990" (R-Car E3) + - "renesas,dmac-r8a77995" (R-Car D3) + +- reg: base address and length of the registers block for the DMAC + +- interrupts: interrupt specifiers for the DMAC, one for each entry in + interrupt-names. +- interrupt-names: one entry for the error interrupt, named "error", plus one + entry per channel, named "ch%u", where %u is the channel number ranging from + zero to the number of channels minus one. + +- clock-names: "fck" for the functional clock +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: must contain "fck" for the functional clock. + +- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port + connected to the DMA client +- dma-channels: number of DMA channels + +Example: R8A7790 (R-Car H2) SYS-DMACs + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; |