1 files changed, 101 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
new file mode 100644
index 000000000..9b62831fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -0,0 +1,101 @@
+Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+Required properties:
+
+  - compatible : One of the following chip-specific strings:
+        "cirrus,cs47l24"
+        "wlf,wm5102"
+        "wlf,wm5110"
+        "wlf,wm8280"
+        "wlf,wm8997"
+        "wlf,wm8998"
+        "wlf,wm1814"
+        "wlf,wm1831"
+
+  - reg : I2C slave address when connected using I2C, chip select number when
+    using SPI.
+
+  - interrupts : The interrupt line the /IRQ signal for the device is
+    connected to.
+  - interrupt-controller : Arizona class devices contain interrupt controllers
+    and may provide interrupt services to other devices.
+  - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+    The first cell is the IRQ number.
+    The second cell is the flags, encoded as the trigger masks from
+    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number and the
+    second cell is used to specify optional parameters, see ../gpio/gpio.txt
+    for details.
+
+  - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
+    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+  - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
+    wm5110, wm8280, wm8998, wm1814)
+
+  - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
+    wm5110, wm8280, wm8998, wm1814)
+
+  - SPKVDD-supply : Speaker driver power supply (wm8997)
+
+  - DCVDD-supply : Main power supply (cs47l24, wm1831)
+
+  - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
+
+Optional properties:
+
+  - reset-gpios : GPIO specifier for the GPIO controlling /RESET
+
+  - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
+  - clock-names: Should contains two strings:
+      "mclk1" for the clock supplied on MCLK1, recommended to be a high
+      quality audio reference clock
+      "mclk2" for the clock supplied on MCLK2, recommended to be an always on
+      32k clock
+
+  - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
+    for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
+    absent, no configuration of these registers is performed. If any entry has
+    a value that is out of range for a 16 bit register then the chip default
+    will be used. If present exactly five values must be specified.
+
+  - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
+    they are being externally supplied. As covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt
+    (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
+
+Deprecated properties:
+
+  - wlf,reset : GPIO specifier for the GPIO controlling /RESET
+
+Also see child specific device properties:
+  Regulator - ../regulator/arizona-regulator.txt
+  Extcon    - ../extcon/extcon-arizona.txt
+  Sound     - ../sound/arizona.txt
+
+Example:
+
+codec: wm5102@1a {
+	compatible = "wlf,wm5102";
+	reg = <0x1a>;
+	interrupts = <347>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	wlf,gpio-defaults = <
+		ARIZONA_GP_FN_TXLRCLK
+		ARIZONA_GP_DEFAULT
+		ARIZONA_GP_DEFAULT
+		ARIZONA_GP_DEFAULT
+		ARIZONA_GP_DEFAULT
+	>;
+};