1 files changed, 31 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
new file mode 100644
index 000000000..9029b45b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -0,0 +1,31 @@
+* The simple MMC power sequence provider
+
+The purpose of the simple MMC power sequence provider is to supports a set of
+common properties between various SOC designs. It thus enables us to use the
+same provider for several SOC designs.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-simple".
+
+Optional properties:
+- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted
+	at initialization and prior we start the power up procedure of the card.
+	They will be de-asserted right after the power has been provided to the
+	card.
+- clocks : Must contain an entry for the entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entry:
+  "ext_clock" (External clock provided to the card).
+- post-power-on-delay-ms : Delay in ms after powering the card and
+	de-asserting the reset-gpios (if any)
+- power-off-delay-us : Delay in us after asserting the reset-gpios (if any)
+	during power off of the card.
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_32768_ck>;
+		clock-names = "ext_clock";
+	}