diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/mediatek-net.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/mediatek-net.txt | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt new file mode 100644 index 000000000..503f2b919 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -0,0 +1,87 @@ +MediaTek Frame Engine Ethernet controller +========================================= + +The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs +have dual GMAC each represented by a child node.. + +* Ethernet controller node + +Required properties: +- compatible: Should be + "mediatek,mt2701-eth": for MT2701 SoC + "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC + "mediatek,mt7622-eth": for MT7622 SoC +- reg: Address and length of the register set for the device +- interrupts: Should contain the three frame engines interrupts in numeric + order. These are fe_int0, fe_int1 and fe_int2. +- clocks: the clock used by the core +- clock-names: the names of the clock listed in the clocks property. These are + "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC + "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC +- power-domains: phandle to the power domain that the ethernet is part of +- resets: Should contain phandles to the ethsys reset signals +- reset-names: Should contain the names of reset signal listed in the resets + property + These are "fe", "gmac" and "ppe" +- mediatek,ethsys: phandle to the syscon node that handles the port setup +- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup + which is required for those SoCs equipped with SGMII such as MT7622 SoC. +- mediatek,pctl: phandle to the syscon node that handles the ports slew rate + and driver current: only for MT2701 and MT7623 SoC + +* Ethernet MAC node + +Required properties: +- compatible: Should be "mediatek,eth-mac" +- reg: The number of the MAC +- phy-handle: see ethernet.txt file in the same directory and + the phy-mode "trgmii" required being provided when reg + is equal to 0 and the MAC uses fixed-link to connect + with internal switch such as MT7530. + +Example: + +eth: ethernet@1b100000 { + compatible = "mediatek,mt7623-eth"; + reg = <0 0x1b100000 0 0x20000>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP2>, + <ðsys CLK_ETHSYS_GP1>; + clock-names = "ethif", "esw", "gp2", "gp1"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW + GIC_SPI 199 IRQ_TYPE_LEVEL_LOW + GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + resets = <ðsys MT2701_ETHSYS_ETH_RST>; + reset-names = "eth"; + mediatek,ethsys = <ðsys>; + mediatek,pctl = <&syscfg_pctl_a>; + #address-cells = <1>; + #size-cells = <0>; + + gmac1: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-handle = <&phy0>; + }; + + gmac2: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy1>; + }; + + mdio-bus { + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + }; +}; |