1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
new file mode 100644
index 000000000..bfcf80341
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -0,0 +1,43 @@
+mvebu comphy driver
+-------------------
+
+A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It
+provides a number of shared PHYs used by various interfaces (network, sata,
+usb, PCIe...).
+
+Required properties:
+
+- compatible: should be "marvell,comphy-cp110"
+- reg: should contain the comphy register location and length.
+- marvell,system-controller: should contain a phandle to the
+                             system controller node.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+A sub-node is required for each comphy lane provided by the comphy.
+
+Required properties (child nodes):
+
+- reg: comphy lane number.
+- #phy-cells : from the generic phy bindings, must be 1. Defines the
+               input port to use for a given comphy lane.
+
+Example:
+
+	cpm_comphy: phy@120000 {
+		compatible = "marvell,comphy-cp110";
+		reg = <0x120000 0x6000>;
+		marvell,system-controller = <&cpm_syscon0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpm_comphy0: phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		cpm_comphy1: phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+	};