diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt new file mode 100644 index 000000000..fa97f609f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -0,0 +1,208 @@ +Qualcomm MSM8996 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8996 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,msm8996-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins are: + gpio0-gpio149 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, + sdc2_data sdc1_rclk + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 150>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; |