diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/reset/lantiq,reset.txt | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt new file mode 100644 index 000000000..c6aef36b7 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/lantiq,reset.txt @@ -0,0 +1,30 @@ +Lantiq XWAY SoC RCU reset controller binding +============================================ + +This binding describes a reset-controller found on the RCU module on Lantiq +XWAY SoCs. + +This node has to be a sub node of the Lantiq RCU block. + +------------------------------------------------------------------------------- +Required properties: +- compatible : Should be one of + "lantiq,danube-reset" + "lantiq,xrx200-reset" +- reg : Defines the following sets of registers in the parent + syscon device + - Offset of the reset set register + - Offset of the reset status register +- #reset-cells : Specifies the number of cells needed to encode the + reset line, should be 2. + The first cell takes the reset set bit and the + second cell takes the status bit. + +------------------------------------------------------------------------------- +Example for the reset-controllers on the xRX200 SoCs: + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg <0x10 0x04>, <0x14 0x04>; + + #reset-cells = <2>; + }; |