1 files changed, 52 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
new file mode 100644
index 000000000..510c74865
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
@@ -0,0 +1,52 @@
+Qualcomm AOSS Reset Controller
+======================================
+
+This binding describes a reset-controller found on AOSS-CC (always on subsystem)
+for Qualcomm SDM845 SoCs.
+
+Required properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be:
+		    "qcom,sdm845-aoss-cc"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the register
+	            space.
+
+- #reset-cells:
+	Usage: required
+	Value type: <uint>
+	Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+aoss_reset: reset-controller@c2a0000 {
+	compatible = "qcom,sdm845-aoss-cc";
+	reg = <0xc2a0000 0x31000>;
+	#reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/qcom,sdm845-aoss.h>
+
+Example:
+
+modem-pil@4080000 {
+	...
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
+	reset-names = "mss_restart";
+
+	...
+};