1 files changed, 64 insertions, 0 deletions
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
new file mode 100644
index 000000000..b8df81f6d
--- /dev/null
+++ b/Documentation/hwmon/ina2xx
@@ -0,0 +1,64 @@
+Kernel driver ina2xx
+====================
+
+Supported chips:
+  * Texas Instruments INA219
+    Prefix: 'ina219'
+    Addresses: I2C 0x40 - 0x4f
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/
+
+  * Texas Instruments INA220
+    Prefix: 'ina220'
+    Addresses: I2C 0x40 - 0x4f
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/
+
+  * Texas Instruments INA226
+    Prefix: 'ina226'
+    Addresses: I2C 0x40 - 0x4f
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/
+
+  * Texas Instruments INA230
+    Prefix: 'ina230'
+    Addresses: I2C 0x40 - 0x4f
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/
+
+  * Texas Instruments INA231
+    Prefix: 'ina231'
+    Addresses: I2C 0x40 - 0x4f
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/
+
+Author: Lothar Felten <lothar.felten@gmail.com>
+
+Description
+-----------
+
+The INA219 is a high-side current shunt and power monitor with an I2C
+interface. The INA219 monitors both shunt drop and supply voltage, with
+programmable conversion times and filtering.
+
+The INA220 is a high or low side current shunt and power monitor with an I2C
+interface. The INA220 monitors both shunt drop and supply voltage.
+
+The INA226 is a current shunt and power monitor with an I2C interface.
+The INA226 monitors both a shunt voltage drop and bus supply voltage.
+
+INA230 and INA231 are high or low side current shunt and power monitors
+with an I2C interface. The chips monitor both a shunt voltage drop and
+bus supply voltage.
+
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
+if the device tree is used.
+
+Additionally ina226 supports update_interval attribute as described in
+Documentation/hwmon/sysfs-interface. Internally the interval is the sum of
+bus and shunt voltage conversion times multiplied by the averaging rate. We
+don't touch the conversion times and only modify the number of averages. The
+lower limit of the update_interval is 2 ms, the upper limit is 2253 ms.
+The actual programmed interval may vary from the desired value.