diff options
Diffstat (limited to 'Documentation/media/uapi/cec/cec-ioc-dqevent.rst')
| -rw-r--r-- | Documentation/media/uapi/cec/cec-ioc-dqevent.rst | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst new file mode 100644 index 000000000..8d5633e6a --- /dev/null +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -0,0 +1,244 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CEC_DQEVENT: + +***************** +ioctl CEC_DQEVENT +***************** + +Name +==== + +CEC_DQEVENT - Dequeue a CEC event + + +Synopsis +======== + +.. c:function:: int ioctl( int fd, CEC_DQEVENT, struct cec_event *argp ) + :name: CEC_DQEVENT + +Arguments +========= + +``fd`` + File descriptor returned by :c:func:`open() <cec-open>`. + +``argp`` + + +Description +=========== + +CEC devices can send asynchronous events. These can be retrieved by +calling :c:func:`CEC_DQEVENT`. If the file descriptor is in +non-blocking mode and no event is pending, then it will return -1 and +set errno to the ``EAGAIN`` error code. + +The internal event queues are per-filehandle and per-event type. If +there is no more room in a queue then the last event is overwritten with +the new one. This means that intermediate results can be thrown away but +that the latest event is always available. This also means that is it +possible to read two successive events that have the same value (e.g. +two :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` events with +the same state). In that case the intermediate state changes were lost but +it is guaranteed that the state did change in between the two events. + +.. tabularcolumns:: |p{1.2cm}|p{2.9cm}|p{13.4cm}| + +.. c:type:: cec_event_state_change + +.. flat-table:: struct cec_event_state_change + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 8 + + * - __u16 + - ``phys_addr`` + - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no + valid physical address is set. + * - __u16 + - ``log_addr_mask`` + - The current set of claimed logical addresses. This is 0 if no logical + addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``. + If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device + has the unregistered logical address. In that case all other bits are 0. + + +.. c:type:: cec_event_lost_msgs + +.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.5cm}| + +.. flat-table:: struct cec_event_lost_msgs + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 16 + + * - __u32 + - ``lost_msgs`` + - Set to the number of lost messages since the filehandle was opened + or since the last time this event was dequeued for this + filehandle. The messages lost are the oldest messages. So when a + new message arrives and there is no more room, then the oldest + message is discarded to make room for the new one. The internal + size of the message queue guarantees that all messages received in + the last two seconds will be stored. Since messages should be + replied to within a second according to the CEC specification, + this is more than enough. + + +.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}| + +.. c:type:: cec_event + +.. flat-table:: struct cec_event + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 1 8 + + * - __u64 + - ``ts`` + - :cspan:`1`\ Timestamp of the event in ns. + + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. + + To access the same clock from userspace use :c:func:`clock_gettime`. + * - __u32 + - ``event`` + - :cspan:`1` The CEC event type, see :ref:`cec-events`. + * - __u32 + - ``flags`` + - :cspan:`1` Event flags, see :ref:`cec-event-flags`. + * - union + - (anonymous) + - + - + * - + - struct cec_event_state_change + - ``state_change`` + - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` + event. + * - + - struct cec_event_lost_msgs + - ``lost_msgs`` + - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>` + event. + + +.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| + +.. _cec-events: + +.. flat-table:: CEC Events Types + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 16 + + * .. _`CEC-EVENT-STATE-CHANGE`: + + - ``CEC_EVENT_STATE_CHANGE`` + - 1 + - Generated when the CEC Adapter's state changes. When open() is + called an initial event will be generated for that filehandle with + the CEC Adapter's state at that time. + * .. _`CEC-EVENT-LOST-MSGS`: + + - ``CEC_EVENT_LOST_MSGS`` + - 2 + - Generated if one or more CEC messages were lost because the + application didn't dequeue CEC messages fast enough. + * .. _`CEC-EVENT-PIN-CEC-LOW`: + + - ``CEC_EVENT_PIN_CEC_LOW`` + - 3 + - Generated if the CEC pin goes from a high voltage to a low voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. + * .. _`CEC-EVENT-PIN-CEC-HIGH`: + + - ``CEC_EVENT_PIN_CEC_HIGH`` + - 4 + - Generated if the CEC pin goes from a low voltage to a high voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. + * .. _`CEC-EVENT-PIN-HPD-LOW`: + + - ``CEC_EVENT_PIN_HPD_LOW`` + - 5 + - Generated if the HPD pin goes from a high voltage to a low voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the HPD pin can be read and + if the HPD is low, then an initial event will be generated for that + filehandle. + * .. _`CEC-EVENT-PIN-HPD-HIGH`: + + - ``CEC_EVENT_PIN_HPD_HIGH`` + - 6 + - Generated if the HPD pin goes from a low voltage to a high voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the HPD pin can be read and + if the HPD is high, then an initial event will be generated for that + filehandle. + * .. _`CEC-EVENT-PIN-5V-LOW`: + + - ``CEC_EVENT_PIN_5V_LOW`` + - 6 + - Generated if the 5V pin goes from a high voltage to a low voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the 5V pin can be read and + if the 5V is low, then an initial event will be generated for that + filehandle. + * .. _`CEC-EVENT-PIN-5V-HIGH`: + + - ``CEC_EVENT_PIN_5V_HIGH`` + - 7 + - Generated if the 5V pin goes from a low voltage to a high voltage. + Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN`` + capability set. When open() is called, the 5V pin can be read and + if the 5V is high, then an initial event will be generated for that + filehandle. + + +.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| + +.. _cec-event-flags: + +.. flat-table:: CEC Event Flags + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 8 + + * .. _`CEC-EVENT-FL-INITIAL-STATE`: + + - ``CEC_EVENT_FL_INITIAL_STATE`` + - 1 + - Set for the initial events that are generated when the device is + opened. See the table above for which events do this. This allows + applications to learn the initial state of the CEC adapter at + open() time. + * .. _`CEC-EVENT-FL-DROPPED-EVENTS`: + + - ``CEC_EVENT_FL_DROPPED_EVENTS`` + - 2 + - Set if one or more events of the given event type have been dropped. + This is an indication that the application cannot keep up. + + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +The :ref:`ioctl CEC_DQEVENT <CEC_DQEVENT>` can return the following +error codes: + +EAGAIN + This is returned when the filehandle is in non-blocking mode and there + are no pending events. + +ERESTARTSYS + An interrupt (e.g. Ctrl-C) arrived while in blocking mode waiting for + events to arrive. |