1 files changed, 66 insertions, 0 deletions
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt
new file mode 100644
index 000000000..25320bf19
--- /dev/null
+++ b/Documentation/networking/dmfe.txt
@@ -0,0 +1,66 @@
+Note: This driver doesn't have a maintainer.
+
+Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General   Public License
+as published by the Free Software Foundation; either version 2
+of the License, or (at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+
+This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET
+10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If you
+didn't compile this driver as a module, it will automatically load itself on boot and print a
+line similar to :
+
+	dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
+
+If you compiled this driver as a module, you have to load it on boot.You can load it with command :
+
+	insmod dmfe
+
+This way it will autodetect the device mode.This is the suggested way to load the module.Or you can pass
+a mode= setting to module while loading, like :
+
+	insmod dmfe mode=0 # Force 10M Half Duplex
+	insmod dmfe mode=1 # Force 100M Half Duplex
+	insmod dmfe mode=4 # Force 10M Full Duplex
+	insmod dmfe mode=5 # Force 100M Full Duplex
+
+Next you should configure your network interface with a command similar to :
+
+	ifconfig eth0 172.22.3.18
+                      ^^^^^^^^^^^
+		     Your IP Address
+
+Then you may have to modify the default routing table with command :
+
+	route add default eth0
+
+
+Now your ethernet card should be up and running.
+
+
+TODO:
+
+Implement pci_driver::suspend() and pci_driver::resume() power management methods.
+Check on 64 bit boxes.
+Check and fix on big endian boxes.
+Test and make sure PCI latency is now correct for all cases.
+
+
+Authors:
+
+Sten Wang <sten_wang@davicom.com.tw >   : Original Author
+
+Contributors:
+
+Marcelo Tosatti <marcelo@conectiva.com.br>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
+Jeff Garzik <jgarzik@pobox.com>
+Vojtech Pavlik <vojtech@suse.cz>