diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/sound/soc/codec-to-codec.rst | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst new file mode 100644 index 000000000..810109d75 --- /dev/null +++ b/Documentation/sound/soc/codec-to-codec.rst @@ -0,0 +1,108 @@ +============================================== +Creating codec to codec dai link for ALSA dapm +============================================== + +Mostly the flow of audio is always from CPU to codec so your system +will look as below: +:: + + --------- --------- + | | dai | | + CPU -------> codec + | | | | + --------- --------- + +In case your system looks as below: +:: + + --------- + | | + codec-2 + | | + --------- + | + dai-2 + | + ---------- --------- + | | dai-1 | | + CPU -------> codec-1 + | | | | + ---------- --------- + | + dai-3 + | + --------- + | | + codec-3 + | | + --------- + +Suppose codec-2 is a bluetooth chip and codec-3 is connected to +a speaker and you have a below scenario: +codec-2 will receive the audio data and the user wants to play that +audio through codec-3 without involving the CPU.This +aforementioned case is the ideal case when codec to codec +connection should be used. + +Your dai_link should appear as below in your machine +file: +:: + + /* + * this pcm stream only supports 24 bit, 2 channel and + * 48k sampling rate. + */ + static const struct snd_soc_pcm_stream dsp_codec_params = { + .formats = SNDRV_PCM_FMTBIT_S24_LE, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + }; + + { + .name = "CPU-DSP", + .stream_name = "CPU-DSP", + .cpu_dai_name = "samsung-i2s.0", + .codec_name = "codec-2, + .codec_dai_name = "codec-2-dai_name", + .platform_name = "samsung-i2s.0", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .ignore_suspend = 1, + .params = &dsp_codec_params, + }, + { + .name = "DSP-CODEC", + .stream_name = "DSP-CODEC", + .cpu_dai_name = "wm0010-sdi2", + .codec_name = "codec-3, + .codec_dai_name = "codec-3-dai_name", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .ignore_suspend = 1, + .params = &dsp_codec_params, + }, + +Above code snippet is motivated from sound/soc/samsung/speyside.c. + +Note the "params" callback which lets the dapm know that this +dai_link is a codec to codec connection. + +In dapm core a route is created between cpu_dai playback widget +and codec_dai capture widget for playback path and vice-versa is +true for capture path. In order for this aforementioned route to get +triggered, DAPM needs to find a valid endpoint which could be either +a sink or source widget corresponding to playback and capture path +respectively. + +In order to trigger this dai_link widget, a thin codec driver for +the speaker amp can be created as demonstrated in wm8727.c file, it +sets appropriate constraints for the device even if it needs no control. + +Make sure to name your corresponding cpu and codec playback and capture +dai names ending with "Playback" and "Capture" respectively as dapm core +will link and power those dais based on the name. + +Note that in current device tree there is no way to mark a dai_link +as codec to codec. However, it may change in future. |