diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi new file mode 100644 index 000000000..ccaa55518 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/mfd/max77620.h> + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA Jetson TX1"; + compatible = "nvidia,p2180", "nvidia,tegra210"; + + aliases { + rtc0 = "/i2c@7000d000/pmic@3c"; + rtc1 = "/rtc@7000e000"; + serial0 = &uarta; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0>; + }; + + gpu@57000000 { + vdd-supply = <&vdd_gpu>; + }; + + /* debug port */ + serial@70006000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + drive-push-pull = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <7>; + maxim,active-fps-power-down-slot = <0>; + }; + + gpio2_3 { + pins = "gpio2", "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + }; + + gpio5_6_7 { + pins = "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-push-pull = <1>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,suspend-fps-time-period-us = <1280>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,suspend-fps-time-period-us = <1280>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + }; + + regulators { + in-ldo0-1-supply = <&vdd_pre>; + in-ldo7-8-supply = <&vdd_pre>; + in-sd3-supply = <&vdd_5v0_sys>; + + vdd_soc: sd0 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <146>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + vdd_ddr: sd1 { + regulator-name = "VDD_DDR_1V1_PMIC"; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <130>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + vdd_pre: sd2 { + regulator-name = "VDD_PRE_REG_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + + regulator-enable-ramp-delay = <176>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + vdd_1v8: sd3 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <242>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + vdd_sys_1v2: ldo0 { + regulator-name = "AVDD_SYS_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <26>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + vdd_pex_1v05: ldo1 { + regulator-name = "VDD_PEX_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + regulator-enable-ramp-delay = <22>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + vddio_sdmmc: ldo2 { + regulator-name = "VDDIO_SDMMC"; + /* + * Technically this supply should have + * a supported range from 1.8 - 3.3 V. + * However, that would cause the SDHCI + * driver to request 2.7 V upon access + * and that in turn will cause traffic + * to be broken. Leave it at 3.3 V for + * now. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <62>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + vdd_cam_hv: ldo3 { + regulator-name = "VDD_CAM_HV"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-enable-ramp-delay = <50>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + vdd_rtc: ldo4 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <22>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + vdd_ts_hv: ldo5 { + regulator-name = "VDD_TS_HV"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-enable-ramp-delay = <62>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + vdd_ts: ldo6 { + regulator-name = "VDD_TS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-enable-ramp-delay = <36>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <7>; + maxim,active-fps-power-down-slot = <0>; + }; + + avdd_1v05_pll: ldo7 { + regulator-name = "AVDD_1V05_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <24>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + avdd_1v05: ldo8 { + regulator-name = "AVDD_SATA_HDMI_DP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + regulator-enable-ramp-delay = <22>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + }; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* eMMC */ + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + vqmmc-supply = <&vdd_1v8>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + regulators { + vdd_gpu: regulator@100 { + compatible = "pwm-regulator"; + reg = <100>; + pwms = <&pwm 1 4880>; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; + }; + }; +}; |