diff options
Diffstat (limited to 'arch/m68k/bvme6000/config.c')
| -rw-r--r-- | arch/m68k/bvme6000/config.c | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c new file mode 100644 index 000000000..0e5efed4d --- /dev/null +++ b/arch/m68k/bvme6000/config.c @@ -0,0 +1,305 @@ +/* + * arch/m68k/bvme6000/config.c + * + * Copyright (C) 1997 Richard Hirst [richard@sleepie.demon.co.uk] + * + * Based on: + * + * linux/amiga/config.c + * + * Copyright (C) 1993 Hamish Macdonald + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file README.legal in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/console.h> +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/genhd.h> +#include <linux/rtc.h> +#include <linux/interrupt.h> +#include <linux/bcd.h> + +#include <asm/bootinfo.h> +#include <asm/bootinfo-vme.h> +#include <asm/byteorder.h> +#include <asm/pgtable.h> +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/traps.h> +#include <asm/machdep.h> +#include <asm/bvme6000hw.h> + +static void bvme6000_get_model(char *model); +extern void bvme6000_sched_init(irq_handler_t handler); +extern u32 bvme6000_gettimeoffset(void); +extern int bvme6000_hwclk (int, struct rtc_time *); +extern void bvme6000_reset (void); +void bvme6000_set_vectors (void); + + +int __init bvme6000_parse_bootinfo(const struct bi_record *bi) +{ + if (be16_to_cpu(bi->tag) == BI_VME_TYPE) + return 0; + else + return 1; +} + +void bvme6000_reset(void) +{ + volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; + + pr_info("\r\n\nCalled bvme6000_reset\r\n" + "\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r"); + /* The string of returns is to delay the reset until the whole + * message is output. */ + /* Enable the watchdog, via PIT port C bit 4 */ + + pit->pcddr |= 0x10; /* WDOG enable */ + + while(1) + ; +} + +static void bvme6000_get_model(char *model) +{ + sprintf(model, "BVME%d000", m68k_cputype == CPU_68060 ? 6 : 4); +} + +/* + * This function is called during kernel startup to initialize + * the bvme6000 IRQ handling routines. + */ +static void __init bvme6000_init_IRQ(void) +{ + m68k_setup_user_interrupt(VEC_USER, 192); +} + +void __init config_bvme6000(void) +{ + volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; + + /* Board type is only set by newer versions of vmelilo/tftplilo */ + if (!vme_brdtype) { + if (m68k_cputype == CPU_68060) + vme_brdtype = VME_TYPE_BVME6000; + else + vme_brdtype = VME_TYPE_BVME4000; + } +#if 0 + /* Call bvme6000_set_vectors() so ABORT will work, along with BVMBug + * debugger. Note trap_init() will splat the abort vector, but + * bvme6000_init_IRQ() will put it back again. Hopefully. */ + + bvme6000_set_vectors(); +#endif + + mach_max_dma_address = 0xffffffff; + mach_sched_init = bvme6000_sched_init; + mach_init_IRQ = bvme6000_init_IRQ; + arch_gettimeoffset = bvme6000_gettimeoffset; + mach_hwclk = bvme6000_hwclk; + mach_reset = bvme6000_reset; + mach_get_model = bvme6000_get_model; + + pr_info("Board is %sconfigured as a System Controller\n", + *config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not "); + + /* Now do the PIT configuration */ + + pit->pgcr = 0x00; /* Unidirectional 8 bit, no handshake for now */ + pit->psrr = 0x18; /* PIACK and PIRQ functions enabled */ + pit->pacr = 0x00; /* Sub Mode 00, H2 i/p, no DMA */ + pit->padr = 0x00; /* Just to be tidy! */ + pit->paddr = 0x00; /* All inputs for now (safest) */ + pit->pbcr = 0x80; /* Sub Mode 1x, H4 i/p, no DMA */ + pit->pbdr = 0xbc | (*config_reg_ptr & BVME_CONFIG_SW1 ? 0 : 0x40); + /* PRI, SYSCON?, Level3, SCC clks from xtal */ + pit->pbddr = 0xf3; /* Mostly outputs */ + pit->pcdr = 0x01; /* PA transceiver disabled */ + pit->pcddr = 0x03; /* WDOG disable */ + + /* Disable snooping for Ethernet and VME accesses */ + + bvme_acr_addrctl = 0; +} + + +irqreturn_t bvme6000_abort_int (int irq, void *dev_id) +{ + unsigned long *new = (unsigned long *)vectors; + unsigned long *old = (unsigned long *)0xf8000000; + + /* Wait for button release */ + while (*(volatile unsigned char *)BVME_LOCAL_IRQ_STAT & BVME_ABORT_STATUS) + ; + + *(new+4) = *(old+4); /* Illegal instruction */ + *(new+9) = *(old+9); /* Trace */ + *(new+47) = *(old+47); /* Trap #15 */ + *(new+0x1f) = *(old+0x1f); /* ABORT switch */ + return IRQ_HANDLED; +} + + +static irqreturn_t bvme6000_timer_int (int irq, void *dev_id) +{ + irq_handler_t timer_routine = dev_id; + unsigned long flags; + volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; + unsigned char msr; + + local_irq_save(flags); + msr = rtc->msr & 0xc0; + rtc->msr = msr | 0x20; /* Ack the interrupt */ + timer_routine(0, NULL); + local_irq_restore(flags); + + return IRQ_HANDLED; +} + +/* + * Set up the RTC timer 1 to mode 2, so T1 output toggles every 5ms + * (40000 x 125ns). It will interrupt every 10ms, when T1 goes low. + * So, when reading the elapsed time, you should read timer1, + * subtract it from 39999, and then add 40000 if T1 is high. + * That gives you the number of 125ns ticks in to the 10ms period, + * so divide by 8 to get the microsecond result. + */ + +void bvme6000_sched_init (irq_handler_t timer_routine) +{ + volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; + unsigned char msr = rtc->msr & 0xc0; + + rtc->msr = 0; /* Ensure timer registers accessible */ + + if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, 0, "timer", + timer_routine)) + panic ("Couldn't register timer int"); + + rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */ + rtc->t1msb = 39999 >> 8; + rtc->t1lsb = 39999 & 0xff; + rtc->irr_icr1 &= 0xef; /* Route timer 1 to INTR pin */ + rtc->msr = 0x40; /* Access int.cntrl, etc */ + rtc->pfr_icr0 = 0x80; /* Just timer 1 ints enabled */ + rtc->irr_icr1 = 0; + rtc->t1cr_omr = 0x0a; /* INTR+T1 active lo, push-pull */ + rtc->t0cr_rtmr &= 0xdf; /* Stop timers in standby */ + rtc->msr = 0; /* Access timer 1 control */ + rtc->t1cr_omr = 0x05; /* Mode 2, ext clk, GO */ + + rtc->msr = msr; + + if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0, + "abort", bvme6000_abort_int)) + panic ("Couldn't register abort int"); +} + + +/* This is always executed with interrupts disabled. */ + +/* + * NOTE: Don't accept any readings within 5us of rollover, as + * the T1INT bit may be a little slow getting set. There is also + * a fault in the chip, meaning that reads may produce invalid + * results... + */ + +u32 bvme6000_gettimeoffset(void) +{ + volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; + volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; + unsigned char msr = rtc->msr & 0xc0; + unsigned char t1int, t1op; + u32 v = 800000, ov; + + rtc->msr = 0; /* Ensure timer registers accessible */ + + do { + ov = v; + t1int = rtc->msr & 0x20; + t1op = pit->pcdr & 0x04; + rtc->t1cr_omr |= 0x40; /* Latch timer1 */ + v = rtc->t1msb << 8; /* Read timer1 */ + v |= rtc->t1lsb; /* Read timer1 */ + } while (t1int != (rtc->msr & 0x20) || + t1op != (pit->pcdr & 0x04) || + abs(ov-v) > 80 || + v > 39960); + + v = 39999 - v; + if (!t1op) /* If in second half cycle.. */ + v += 40000; + v /= 8; /* Convert ticks to microseconds */ + if (t1int) + v += 10000; /* Int pending, + 10ms */ + rtc->msr = msr; + + return v * 1000; +} + +/* + * Looks like op is non-zero for setting the clock, and zero for + * reading the clock. + * + * struct hwclk_time { + * unsigned sec; 0..59 + * unsigned min; 0..59 + * unsigned hour; 0..23 + * unsigned day; 1..31 + * unsigned mon; 0..11 + * unsigned year; 00... + * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set + * }; + */ + +int bvme6000_hwclk(int op, struct rtc_time *t) +{ + volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; + unsigned char msr = rtc->msr & 0xc0; + + rtc->msr = 0x40; /* Ensure clock and real-time-mode-register + * are accessible */ + if (op) + { /* Write.... */ + rtc->t0cr_rtmr = t->tm_year%4; + rtc->bcd_tenms = 0; + rtc->bcd_sec = bin2bcd(t->tm_sec); + rtc->bcd_min = bin2bcd(t->tm_min); + rtc->bcd_hr = bin2bcd(t->tm_hour); + rtc->bcd_dom = bin2bcd(t->tm_mday); + rtc->bcd_mth = bin2bcd(t->tm_mon + 1); + rtc->bcd_year = bin2bcd(t->tm_year%100); + if (t->tm_wday >= 0) + rtc->bcd_dow = bin2bcd(t->tm_wday+1); + rtc->t0cr_rtmr = t->tm_year%4 | 0x08; + } + else + { /* Read.... */ + do { + t->tm_sec = bcd2bin(rtc->bcd_sec); + t->tm_min = bcd2bin(rtc->bcd_min); + t->tm_hour = bcd2bin(rtc->bcd_hr); + t->tm_mday = bcd2bin(rtc->bcd_dom); + t->tm_mon = bcd2bin(rtc->bcd_mth)-1; + t->tm_year = bcd2bin(rtc->bcd_year); + if (t->tm_year < 70) + t->tm_year += 100; + t->tm_wday = bcd2bin(rtc->bcd_dow)-1; + } while (t->tm_sec != bcd2bin(rtc->bcd_sec)); + } + + rtc->msr = msr; + + return 0; +} |