diff options
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c')
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c | 553 |
1 files changed, 553 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c new file mode 100644 index 000000000..a176358c5 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c @@ -0,0 +1,553 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for SGMII initialization, configuration, + * and monitoring. + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-pcsx-defs.h> +#include <asm/octeon/cvmx-pcsxx-defs.h> + +/** + * Perform initialization required only once for an SGMII port. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_one_time(int interface, int index) +{ + const uint64_t clock_mhz = cvmx_sysinfo_get()->cpu_clock_hz / 1000000; + union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg; + union cvmx_pcsx_linkx_timer_count_reg pcsx_linkx_timer_count_reg; + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + + /* Disable GMX */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + gmxx_prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* + * Write PCS*_LINK*_TIMER_COUNT_REG[COUNT] with the + * appropriate value. 1000BASE-X specifies a 10ms + * interval. SGMII specifies a 1.6ms interval. + */ + pcs_misc_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + pcsx_linkx_timer_count_reg.u64 = + cvmx_read_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface)); + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + pcsx_linkx_timer_count_reg.s.count = + (10000ull * clock_mhz) >> 10; + } else { + /* SGMII */ + pcsx_linkx_timer_count_reg.s.count = + (1600ull * clock_mhz) >> 10; + } + cvmx_write_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface), + pcsx_linkx_timer_count_reg.u64); + + /* + * Write the advertisement register to be used as the + * tx_Config_Reg<D15:D0> of the autonegotiation. In + * 1000BASE-X mode, tx_Config_Reg<D15:D0> is PCS*_AN*_ADV_REG. + * In SGMII PHY mode, tx_Config_Reg<D15:D0> is + * PCS*_SGM*_AN_ADV_REG. In SGMII MAC mode, + * tx_Config_Reg<D15:D0> is the fixed value 0x4001, so this + * step can be skipped. + */ + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + union cvmx_pcsx_anx_adv_reg pcsx_anx_adv_reg; + pcsx_anx_adv_reg.u64 = + cvmx_read_csr(CVMX_PCSX_ANX_ADV_REG(index, interface)); + pcsx_anx_adv_reg.s.rem_flt = 0; + pcsx_anx_adv_reg.s.pause = 3; + pcsx_anx_adv_reg.s.hfd = 1; + pcsx_anx_adv_reg.s.fd = 1; + cvmx_write_csr(CVMX_PCSX_ANX_ADV_REG(index, interface), + pcsx_anx_adv_reg.u64); + } else { + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcsx_miscx_ctl_reg.s.mac_phy) { + /* PHY Mode */ + union cvmx_pcsx_sgmx_an_adv_reg pcsx_sgmx_an_adv_reg; + pcsx_sgmx_an_adv_reg.u64 = + cvmx_read_csr(CVMX_PCSX_SGMX_AN_ADV_REG + (index, interface)); + pcsx_sgmx_an_adv_reg.s.link = 1; + pcsx_sgmx_an_adv_reg.s.dup = 1; + pcsx_sgmx_an_adv_reg.s.speed = 2; + cvmx_write_csr(CVMX_PCSX_SGMX_AN_ADV_REG + (index, interface), + pcsx_sgmx_an_adv_reg.u64); + } else { + /* MAC Mode - Nothing to do */ + } + } + return 0; +} + +/** + * Initialize the SERTES link for the first time or after a loss + * of link. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_link(int interface, int index) +{ + union cvmx_pcsx_mrx_control_reg control_reg; + + /* + * Take PCS through a reset sequence. + * PCS*_MR*_CONTROL_REG[PWR_DN] should be cleared to zero. + * Write PCS*_MR*_CONTROL_REG[RESET]=1 (while not changing the + * value of the other PCS*_MR*_CONTROL_REG bits). Read + * PCS*_MR*_CONTROL_REG[RESET] until it changes value to + * zero. + */ + control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) { + control_reg.s.reset = 1; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + control_reg.u64); + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSX_MRX_CONTROL_REG(index, interface), + union cvmx_pcsx_mrx_control_reg, reset, ==, 0, 10000)) { + cvmx_dprintf("SGMII%d: Timeout waiting for port %d " + "to finish reset\n", + interface, index); + return -1; + } + } + + /* + * Write PCS*_MR*_CONTROL_REG[RST_AN]=1 to ensure a fresh + * sgmii negotiation starts. + */ + control_reg.s.rst_an = 1; + control_reg.s.an_en = 1; + control_reg.s.pwr_dn = 0; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + control_reg.u64); + + /* + * Wait for PCS*_MR*_STATUS_REG[AN_CPT] to be set, indicating + * that sgmii autonegotiation is complete. In MAC mode this + * isn't an ethernet link, but a link between Octeon and the + * PHY. + */ + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + CVMX_WAIT_FOR_FIELD64(CVMX_PCSX_MRX_STATUS_REG(index, interface), + union cvmx_pcsx_mrx_status_reg, an_cpt, ==, 1, + 10000)) { + /* cvmx_dprintf("SGMII%d: Port %d link timeout\n", interface, index); */ + return -1; + } + return 0; +} + +/** + * Configure an SGMII link to the specified speed after the SERTES + * link is up. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * @link_info: Link state to configure + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_link_speed(int interface, + int index, + cvmx_helper_link_info_t + link_info) +{ + int is_enabled; + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + + /* Disable GMX before we make any changes. Remember the enable state */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + is_enabled = gmxx_prtx_cfg.s.en; + gmxx_prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* Wait for GMX to be idle */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_PRTX_CFG(index, interface), union cvmx_gmxx_prtx_cfg, + rx_idle, ==, 1, 10000) + || CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_PRTX_CFG(index, interface), + union cvmx_gmxx_prtx_cfg, tx_idle, ==, 1, + 10000)) { + cvmx_dprintf + ("SGMII%d: Timeout waiting for port %d to be idle\n", + interface, index); + return -1; + } + + /* Read GMX CFG again to make sure the disable completed */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* + * Get the misc control for PCS. We will need to set the + * duplication amount. + */ + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + + /* + * Use GMXENO to force the link down if the status we get says + * it should be down. + */ + pcsx_miscx_ctl_reg.s.gmxeno = !link_info.s.link_up; + + /* Only change the duplex setting if the link is up */ + if (link_info.s.link_up) + gmxx_prtx_cfg.s.duplex = link_info.s.full_duplex; + + /* Do speed based setting for GMX */ + switch (link_info.s.speed) { + case 10: + gmxx_prtx_cfg.s.speed = 0; + gmxx_prtx_cfg.s.speed_msb = 1; + gmxx_prtx_cfg.s.slottime = 0; + /* Setting from GMX-603 */ + pcsx_miscx_ctl_reg.s.samp_pt = 25; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + break; + case 100: + gmxx_prtx_cfg.s.speed = 0; + gmxx_prtx_cfg.s.speed_msb = 0; + gmxx_prtx_cfg.s.slottime = 0; + pcsx_miscx_ctl_reg.s.samp_pt = 0x5; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + break; + case 1000: + gmxx_prtx_cfg.s.speed = 1; + gmxx_prtx_cfg.s.speed_msb = 0; + gmxx_prtx_cfg.s.slottime = 1; + pcsx_miscx_ctl_reg.s.samp_pt = 1; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 512); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 8192); + break; + default: + break; + } + + /* Write the new misc control for PCS */ + cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface), + pcsx_miscx_ctl_reg.u64); + + /* Write the new GMX settings with the port still disabled */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* Read GMX CFG again to make sure the config completed */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Restore the enabled / disabled state */ + gmxx_prtx_cfg.s.en = is_enabled; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + return 0; +} + +/** + * Bring up the SGMII interface to be ready for packet I/O but + * leave I/O disabled using the GMX override. This function + * follows the bringup documented in 10.6.3 of the manual. + * + * @interface: Interface to bringup + * @num_ports: Number of ports on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports) +{ + int index; + + __cvmx_helper_setup_gmx(interface, num_ports); + + for (index = 0; index < num_ports; index++) { + int ipd_port = cvmx_helper_get_ipd_port(interface, index); + __cvmx_helper_sgmii_hardware_init_one_time(interface, index); + /* Linux kernel driver will call ....link_set with the + * proper link state. In the simulator there is no + * link state polling and hence it is set from + * here. + */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) + __cvmx_helper_sgmii_link_set(ipd_port, + __cvmx_helper_sgmii_link_get(ipd_port)); + } + + return 0; +} + +int __cvmx_helper_sgmii_enumerate(int interface) +{ + return 4; +} +/** + * Probe a SGMII interface and determine the number of ports + * connected to it. The SGMII interface should still be down after + * this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_sgmii_probe(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + /* + * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the + * interface needs to be enabled before IPD otherwise per port + * backpressure may not work properly + */ + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + mode.s.en = 1; + cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64); + return __cvmx_helper_sgmii_enumerate(interface); +} + +/** + * Bringup and enable a SGMII interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_sgmii_enable(int interface) +{ + int num_ports = cvmx_helper_ports_on_interface(interface); + int index; + + __cvmx_helper_sgmii_hardware_init(interface, num_ports); + + for (index = 0; index < num_ports; index++) { + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + gmxx_prtx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + gmxx_prtx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), + gmxx_prtx_cfg.u64); + __cvmx_interrupt_pcsx_intx_en_reg_enable(index, interface); + } + __cvmx_interrupt_pcsxx_int_en_reg_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg; + + result.u64 = 0; + + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) { + /* The simulator gives you a simulated 1Gbps full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + + pcsx_mrx_control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + if (pcsx_mrx_control_reg.s.loopbck1) { + /* Force 1Gbps full duplex link for internal loopback */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + + pcs_misc_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + /* FIXME */ + } else { + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcsx_miscx_ctl_reg.s.mac_phy) { + /* PHY Mode */ + union cvmx_pcsx_mrx_status_reg pcsx_mrx_status_reg; + union cvmx_pcsx_anx_results_reg pcsx_anx_results_reg; + + /* + * Don't bother continuing if the SERTES low + * level link is down + */ + pcsx_mrx_status_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_STATUS_REG + (index, interface)); + if (pcsx_mrx_status_reg.s.lnk_st == 0) { + if (__cvmx_helper_sgmii_hardware_init_link + (interface, index) != 0) + return result; + } + + /* Read the autoneg results */ + pcsx_anx_results_reg.u64 = + cvmx_read_csr(CVMX_PCSX_ANX_RESULTS_REG + (index, interface)); + if (pcsx_anx_results_reg.s.an_cpt) { + /* + * Auto negotiation is complete. Set + * status accordingly. + */ + result.s.full_duplex = + pcsx_anx_results_reg.s.dup; + result.s.link_up = + pcsx_anx_results_reg.s.link_ok; + switch (pcsx_anx_results_reg.s.spd) { + case 0: + result.s.speed = 10; + break; + case 1: + result.s.speed = 100; + break; + case 2: + result.s.speed = 1000; + break; + default: + result.s.speed = 0; + result.s.link_up = 0; + break; + } + } else { + /* + * Auto negotiation isn't + * complete. Return link down. + */ + result.s.speed = 0; + result.s.link_up = 0; + } + } else { /* MAC Mode */ + + result = __cvmx_helper_board_link_get(ipd_port); + } + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_sgmii_link_set(int ipd_port, + cvmx_helper_link_info_t link_info) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + __cvmx_helper_sgmii_hardware_init_link(interface, index); + return __cvmx_helper_sgmii_hardware_init_link_speed(interface, index, + link_info); +} + +/** + * Configure a port for internal and/or external loopback. Internal + * loopback causes packets sent by the port to be received by + * Octeon. External loopback causes packets received from the wire to + * sent out again. + * + * @ipd_port: IPD/PKO port to loopback. + * @enable_internal: + * Non zero if you want internal loopback + * @enable_external: + * Non zero if you want external loopback + * + * Returns Zero on success, negative on failure. + */ +int __cvmx_helper_sgmii_configure_loopback(int ipd_port, int enable_internal, + int enable_external) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg; + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + + pcsx_mrx_control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + pcsx_mrx_control_reg.s.loopbck1 = enable_internal; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + pcsx_mrx_control_reg.u64); + + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + pcsx_miscx_ctl_reg.s.loopbck2 = enable_external; + cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface), + pcsx_miscx_ctl_reg.u64); + + __cvmx_helper_sgmii_hardware_init_link(interface, index); + return 0; +} |