diff options
Diffstat (limited to 'arch/mips/cavium-octeon')
44 files changed, 18051 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig new file mode 100644 index 000000000..4984e462b --- /dev/null +++ b/arch/mips/cavium-octeon/Kconfig @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0 +if CPU_CAVIUM_OCTEON + +config CAVIUM_CN63XXP1 + bool "Enable CN63XXP1 errata workarounds" + default "n" + help + The CN63XXP1 chip requires build time workarounds to + function reliably, select this option to enable them. These + workarounds will cause a slight decrease in performance on + non-CN63XXP1 hardware, so it is recommended to select "n" + unless it is known the workarounds are needed. + +config CAVIUM_OCTEON_CVMSEG_SIZE + int "Number of L1 cache lines reserved for CVMSEG memory" + range 0 54 + default 1 + help + CVMSEG LM is a segment that accesses portions of the dcache as a + local memory; the larger CVMSEG is, the smaller the cache is. + This selects the size of CVMSEG LM, which is in cache blocks. The + legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is + between zero and 6192 bytes). + +endif # CPU_CAVIUM_OCTEON + +if CAVIUM_OCTEON_SOC + +config CAVIUM_OCTEON_LOCK_L2 + bool "Lock often used kernel code in the L2" + default "y" + help + Enable locking parts of the kernel into the L2 cache. + +config CAVIUM_OCTEON_LOCK_L2_TLB + bool "Lock the TLB handler in L2" + depends on CAVIUM_OCTEON_LOCK_L2 + default "y" + help + Lock the low level TLB fast path into L2. + +config CAVIUM_OCTEON_LOCK_L2_EXCEPTION + bool "Lock the exception handler in L2" + depends on CAVIUM_OCTEON_LOCK_L2 + default "y" + help + Lock the low level exception handler into L2. + +config CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT + bool "Lock the interrupt handler in L2" + depends on CAVIUM_OCTEON_LOCK_L2 + default "y" + help + Lock the low level interrupt handler into L2. + +config CAVIUM_OCTEON_LOCK_L2_INTERRUPT + bool "Lock the 2nd level interrupt handler in L2" + depends on CAVIUM_OCTEON_LOCK_L2 + default "y" + help + Lock the 2nd level interrupt handler in L2. + +config CAVIUM_OCTEON_LOCK_L2_MEMCPY + bool "Lock memcpy() in L2" + depends on CAVIUM_OCTEON_LOCK_L2 + default "y" + help + Lock the kernel's implementation of memcpy() into L2. + +config OCTEON_ILM + tristate "Module to measure interrupt latency using Octeon CIU Timer" + help + This driver is a module to measure interrupt latency using the + the CIU Timers on Octeon. + + To compile this driver as a module, choose M here. The module + will be called octeon-ilm + +endif # CAVIUM_OCTEON_SOC diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile new file mode 100644 index 000000000..7c02e5429 --- /dev/null +++ b/arch/mips/cavium-octeon/Makefile @@ -0,0 +1,21 @@ +# +# Makefile for the Cavium Octeon specific kernel interface routines +# under Linux. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2005-2009 Cavium Networks +# + +obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o +obj-y += dma-octeon.o +obj-y += octeon-memcpy.o +obj-y += executive/ +obj-y += crypto/ + +obj-$(CONFIG_MTD) += flash_setup.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_OCTEON_ILM) += oct_ilm.o +obj-$(CONFIG_USB) += octeon-usb.o diff --git a/arch/mips/cavium-octeon/Platform b/arch/mips/cavium-octeon/Platform new file mode 100644 index 000000000..45be85370 --- /dev/null +++ b/arch/mips/cavium-octeon/Platform @@ -0,0 +1,7 @@ +# +# Cavium Octeon +# +platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/ +cflags-$(CONFIG_CAVIUM_OCTEON_SOC) += \ + -I$(srctree)/arch/mips/include/asm/mach-cavium-octeon +load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff81100000 diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c new file mode 100644 index 000000000..036d56cc4 --- /dev/null +++ b/arch/mips/cavium-octeon/cpu.c @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/init.h> +#include <linux/irqflags.h> +#include <linux/notifier.h> +#include <linux/prefetch.h> +#include <linux/ptrace.h> +#include <linux/sched.h> +#include <linux/sched/task_stack.h> + +#include <asm/cop2.h> +#include <asm/current.h> +#include <asm/mipsregs.h> +#include <asm/page.h> +#include <asm/octeon/octeon.h> + +static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + unsigned long flags; + unsigned int status; + + switch (action) { + case CU2_EXCEPTION: + prefetch(¤t->thread.cp2); + local_irq_save(flags); + KSTK_STATUS(current) |= ST0_CU2; + status = read_c0_status(); + write_c0_status(status | ST0_CU2); + octeon_cop2_restore(&(current->thread.cp2)); + write_c0_status(status & ~ST0_CU2); + local_irq_restore(flags); + + return NOTIFY_BAD; /* Don't call default notifier */ + } + + return NOTIFY_OK; /* Let default notifier send signals */ +} + +static int __init cnmips_cu2_setup(void) +{ + return cu2_notifier(cnmips_cu2_call, 0); +} +early_initcall(cnmips_cu2_setup); diff --git a/arch/mips/cavium-octeon/crypto/Makefile b/arch/mips/cavium-octeon/crypto/Makefile new file mode 100644 index 000000000..db26c73fa --- /dev/null +++ b/arch/mips/cavium-octeon/crypto/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# OCTEON-specific crypto modules. +# + +obj-y += octeon-crypto.o + +obj-$(CONFIG_CRYPTO_MD5_OCTEON) += octeon-md5.o +obj-$(CONFIG_CRYPTO_SHA1_OCTEON) += octeon-sha1.o +obj-$(CONFIG_CRYPTO_SHA256_OCTEON) += octeon-sha256.o +obj-$(CONFIG_CRYPTO_SHA512_OCTEON) += octeon-sha512.o diff --git a/arch/mips/cavium-octeon/crypto/octeon-crypto.c b/arch/mips/cavium-octeon/crypto/octeon-crypto.c new file mode 100644 index 000000000..cfb4a146c --- /dev/null +++ b/arch/mips/cavium-octeon/crypto/octeon-crypto.c @@ -0,0 +1,69 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2012 Cavium Networks + */ + +#include <asm/cop2.h> +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/sched/task_stack.h> + +#include "octeon-crypto.h" + +/** + * Enable access to Octeon's COP2 crypto hardware for kernel use. Wrap any + * crypto operations in calls to octeon_crypto_enable/disable in order to make + * sure the state of COP2 isn't corrupted if userspace is also performing + * hardware crypto operations. Allocate the state parameter on the stack. + * Returns with preemption disabled. + * + * @state: Pointer to state structure to store current COP2 state in. + * + * Returns: Flags to be passed to octeon_crypto_disable() + */ +unsigned long octeon_crypto_enable(struct octeon_cop2_state *state) +{ + int status; + unsigned long flags; + + preempt_disable(); + local_irq_save(flags); + status = read_c0_status(); + write_c0_status(status | ST0_CU2); + if (KSTK_STATUS(current) & ST0_CU2) { + octeon_cop2_save(&(current->thread.cp2)); + KSTK_STATUS(current) &= ~ST0_CU2; + status &= ~ST0_CU2; + } else if (status & ST0_CU2) { + octeon_cop2_save(state); + } + local_irq_restore(flags); + return status & ST0_CU2; +} +EXPORT_SYMBOL_GPL(octeon_crypto_enable); + +/** + * Disable access to Octeon's COP2 crypto hardware in the kernel. This must be + * called after an octeon_crypto_enable() before any context switch or return to + * userspace. + * + * @state: Pointer to COP2 state to restore + * @flags: Return value from octeon_crypto_enable() + */ +void octeon_crypto_disable(struct octeon_cop2_state *state, + unsigned long crypto_flags) +{ + unsigned long flags; + + local_irq_save(flags); + if (crypto_flags & ST0_CU2) + octeon_cop2_restore(state); + else + write_c0_status(read_c0_status() & ~ST0_CU2); + local_irq_restore(flags); + preempt_enable(); +} +EXPORT_SYMBOL_GPL(octeon_crypto_disable); diff --git a/arch/mips/cavium-octeon/crypto/octeon-crypto.h b/arch/mips/cavium-octeon/crypto/octeon-crypto.h new file mode 100644 index 000000000..7315cc307 --- /dev/null +++ b/arch/mips/cavium-octeon/crypto/octeon-crypto.h @@ -0,0 +1,224 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012-2013 Cavium Inc., All Rights Reserved. + * + * MD5/SHA1/SHA256/SHA512 instruction definitions added by + * Aaro Koskinen <aaro.koskinen@iki.fi>. + * + */ +#ifndef __LINUX_OCTEON_CRYPTO_H +#define __LINUX_OCTEON_CRYPTO_H + +#include <linux/sched.h> +#include <asm/mipsregs.h> + +#define OCTEON_CR_OPCODE_PRIORITY 300 + +extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state); +extern void octeon_crypto_disable(struct octeon_cop2_state *state, + unsigned long flags); + +/* + * Macros needed to implement MD5/SHA1/SHA256: + */ + +/* + * The index can be 0-1 (MD5) or 0-2 (SHA1), 0-3 (SHA256). + */ +#define write_octeon_64bit_hash_dword(value, index) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x0048+" STR(index) \ + : \ + : [rt] "d" (cpu_to_be64(value))); \ +} while (0) + +/* + * The index can be 0-1 (MD5) or 0-2 (SHA1), 0-3 (SHA256). + */ +#define read_octeon_64bit_hash_dword(index) \ +({ \ + u64 __value; \ + \ + __asm__ __volatile__ ( \ + "dmfc2 %[rt],0x0048+" STR(index) \ + : [rt] "=d" (__value) \ + : ); \ + \ + be64_to_cpu(__value); \ +}) + +/* + * The index can be 0-6. + */ +#define write_octeon_64bit_block_dword(value, index) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x0040+" STR(index) \ + : \ + : [rt] "d" (cpu_to_be64(value))); \ +} while (0) + +/* + * The value is the final block dword (64-bit). + */ +#define octeon_md5_start(value) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x4047" \ + : \ + : [rt] "d" (cpu_to_be64(value))); \ +} while (0) + +/* + * The value is the final block dword (64-bit). + */ +#define octeon_sha1_start(value) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x4057" \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * The value is the final block dword (64-bit). + */ +#define octeon_sha256_start(value) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x404f" \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * Macros needed to implement SHA512: + */ + +/* + * The index can be 0-7. + */ +#define write_octeon_64bit_hash_sha512(value, index) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x0250+" STR(index) \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * The index can be 0-7. + */ +#define read_octeon_64bit_hash_sha512(index) \ +({ \ + u64 __value; \ + \ + __asm__ __volatile__ ( \ + "dmfc2 %[rt],0x0250+" STR(index) \ + : [rt] "=d" (__value) \ + : ); \ + \ + __value; \ +}) + +/* + * The index can be 0-14. + */ +#define write_octeon_64bit_block_sha512(value, index) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x0240+" STR(index) \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * The value is the final block word (64-bit). + */ +#define octeon_sha512_start(value) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x424f" \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * The value is the final block dword (64-bit). + */ +#define octeon_sha1_start(value) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x4057" \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * The value is the final block dword (64-bit). + */ +#define octeon_sha256_start(value) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x404f" \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * Macros needed to implement SHA512: + */ + +/* + * The index can be 0-7. + */ +#define write_octeon_64bit_hash_sha512(value, index) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x0250+" STR(index) \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * The index can be 0-7. + */ +#define read_octeon_64bit_hash_sha512(index) \ +({ \ + u64 __value; \ + \ + __asm__ __volatile__ ( \ + "dmfc2 %[rt],0x0250+" STR(index) \ + : [rt] "=d" (__value) \ + : ); \ + \ + __value; \ +}) + +/* + * The index can be 0-14. + */ +#define write_octeon_64bit_block_sha512(value, index) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x0240+" STR(index) \ + : \ + : [rt] "d" (value)); \ +} while (0) + +/* + * The value is the final block word (64-bit). + */ +#define octeon_sha512_start(value) \ +do { \ + __asm__ __volatile__ ( \ + "dmtc2 %[rt],0x424f" \ + : \ + : [rt] "d" (value)); \ +} while (0) + +#endif /* __LINUX_OCTEON_CRYPTO_H */ diff --git a/arch/mips/cavium-octeon/crypto/octeon-md5.c b/arch/mips/cavium-octeon/crypto/octeon-md5.c new file mode 100644 index 000000000..d1ed066e1 --- /dev/null +++ b/arch/mips/cavium-octeon/crypto/octeon-md5.c @@ -0,0 +1,207 @@ +/* + * Cryptographic API. + * + * MD5 Message Digest Algorithm (RFC1321). + * + * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>. + * + * Based on crypto/md5.c, which is: + * + * Derived from cryptoapi implementation, originally based on the + * public domain implementation written by Colin Plumb in 1993. + * + * Copyright (c) Cryptoapi developers. + * Copyright (c) 2002 James Morris <jmorris@intercode.com.au> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <crypto/md5.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/string.h> +#include <asm/byteorder.h> +#include <linux/cryptohash.h> +#include <asm/octeon/octeon.h> +#include <crypto/internal/hash.h> + +#include "octeon-crypto.h" + +/* + * We pass everything as 64-bit. OCTEON can handle misaligned data. + */ + +static void octeon_md5_store_hash(struct md5_state *ctx) +{ + u64 *hash = (u64 *)ctx->hash; + + write_octeon_64bit_hash_dword(hash[0], 0); + write_octeon_64bit_hash_dword(hash[1], 1); +} + +static void octeon_md5_read_hash(struct md5_state *ctx) +{ + u64 *hash = (u64 *)ctx->hash; + + hash[0] = read_octeon_64bit_hash_dword(0); + hash[1] = read_octeon_64bit_hash_dword(1); +} + +static void octeon_md5_transform(const void *_block) +{ + const u64 *block = _block; + + write_octeon_64bit_block_dword(block[0], 0); + write_octeon_64bit_block_dword(block[1], 1); + write_octeon_64bit_block_dword(block[2], 2); + write_octeon_64bit_block_dword(block[3], 3); + write_octeon_64bit_block_dword(block[4], 4); + write_octeon_64bit_block_dword(block[5], 5); + write_octeon_64bit_block_dword(block[6], 6); + octeon_md5_start(block[7]); +} + +static int octeon_md5_init(struct shash_desc *desc) +{ + struct md5_state *mctx = shash_desc_ctx(desc); + + mctx->hash[0] = cpu_to_le32(MD5_H0); + mctx->hash[1] = cpu_to_le32(MD5_H1); + mctx->hash[2] = cpu_to_le32(MD5_H2); + mctx->hash[3] = cpu_to_le32(MD5_H3); + mctx->byte_count = 0; + + return 0; +} + +static int octeon_md5_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct md5_state *mctx = shash_desc_ctx(desc); + const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f); + struct octeon_cop2_state state; + unsigned long flags; + + mctx->byte_count += len; + + if (avail > len) { + memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), + data, len); + return 0; + } + + memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), data, + avail); + + flags = octeon_crypto_enable(&state); + octeon_md5_store_hash(mctx); + + octeon_md5_transform(mctx->block); + data += avail; + len -= avail; + + while (len >= sizeof(mctx->block)) { + octeon_md5_transform(data); + data += sizeof(mctx->block); + len -= sizeof(mctx->block); + } + + octeon_md5_read_hash(mctx); + octeon_crypto_disable(&state, flags); + + memcpy(mctx->block, data, len); + + return 0; +} + +static int octeon_md5_final(struct shash_desc *desc, u8 *out) +{ + struct md5_state *mctx = shash_desc_ctx(desc); + const unsigned int offset = mctx->byte_count & 0x3f; + char *p = (char *)mctx->block + offset; + int padding = 56 - (offset + 1); + struct octeon_cop2_state state; + unsigned long flags; + + *p++ = 0x80; + + flags = octeon_crypto_enable(&state); + octeon_md5_store_hash(mctx); + + if (padding < 0) { + memset(p, 0x00, padding + sizeof(u64)); + octeon_md5_transform(mctx->block); + p = (char *)mctx->block; + padding = 56; + } + + memset(p, 0, padding); + mctx->block[14] = cpu_to_le32(mctx->byte_count << 3); + mctx->block[15] = cpu_to_le32(mctx->byte_count >> 29); + octeon_md5_transform(mctx->block); + + octeon_md5_read_hash(mctx); + octeon_crypto_disable(&state, flags); + + memcpy(out, mctx->hash, sizeof(mctx->hash)); + memset(mctx, 0, sizeof(*mctx)); + + return 0; +} + +static int octeon_md5_export(struct shash_desc *desc, void *out) +{ + struct md5_state *ctx = shash_desc_ctx(desc); + + memcpy(out, ctx, sizeof(*ctx)); + return 0; +} + +static int octeon_md5_import(struct shash_desc *desc, const void *in) +{ + struct md5_state *ctx = shash_desc_ctx(desc); + + memcpy(ctx, in, sizeof(*ctx)); + return 0; +} + +static struct shash_alg alg = { + .digestsize = MD5_DIGEST_SIZE, + .init = octeon_md5_init, + .update = octeon_md5_update, + .final = octeon_md5_final, + .export = octeon_md5_export, + .import = octeon_md5_import, + .descsize = sizeof(struct md5_state), + .statesize = sizeof(struct md5_state), + .base = { + .cra_name = "md5", + .cra_driver_name= "octeon-md5", + .cra_priority = OCTEON_CR_OPCODE_PRIORITY, + .cra_blocksize = MD5_HMAC_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init md5_mod_init(void) +{ + if (!octeon_has_crypto()) + return -ENOTSUPP; + return crypto_register_shash(&alg); +} + +static void __exit md5_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + +module_init(md5_mod_init); +module_exit(md5_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MD5 Message Digest Algorithm (OCTEON)"); +MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); diff --git a/arch/mips/cavium-octeon/crypto/octeon-sha1.c b/arch/mips/cavium-octeon/crypto/octeon-sha1.c new file mode 100644 index 000000000..80d71e775 --- /dev/null +++ b/arch/mips/cavium-octeon/crypto/octeon-sha1.c @@ -0,0 +1,240 @@ +/* + * Cryptographic API. + * + * SHA1 Secure Hash Algorithm. + * + * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>. + * + * Based on crypto/sha1_generic.c, which is: + * + * Copyright (c) Alan Smithee. + * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk> + * Copyright (c) Jean-Francois Dive <jef@linuxbe.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/mm.h> +#include <crypto/sha.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <asm/byteorder.h> +#include <asm/octeon/octeon.h> +#include <crypto/internal/hash.h> + +#include "octeon-crypto.h" + +/* + * We pass everything as 64-bit. OCTEON can handle misaligned data. + */ + +static void octeon_sha1_store_hash(struct sha1_state *sctx) +{ + u64 *hash = (u64 *)sctx->state; + union { + u32 word[2]; + u64 dword; + } hash_tail = { { sctx->state[4], } }; + + write_octeon_64bit_hash_dword(hash[0], 0); + write_octeon_64bit_hash_dword(hash[1], 1); + write_octeon_64bit_hash_dword(hash_tail.dword, 2); + memzero_explicit(&hash_tail.word[0], sizeof(hash_tail.word[0])); +} + +static void octeon_sha1_read_hash(struct sha1_state *sctx) +{ + u64 *hash = (u64 *)sctx->state; + union { + u32 word[2]; + u64 dword; + } hash_tail; + + hash[0] = read_octeon_64bit_hash_dword(0); + hash[1] = read_octeon_64bit_hash_dword(1); + hash_tail.dword = read_octeon_64bit_hash_dword(2); + sctx->state[4] = hash_tail.word[0]; + memzero_explicit(&hash_tail.dword, sizeof(hash_tail.dword)); +} + +static void octeon_sha1_transform(const void *_block) +{ + const u64 *block = _block; + + write_octeon_64bit_block_dword(block[0], 0); + write_octeon_64bit_block_dword(block[1], 1); + write_octeon_64bit_block_dword(block[2], 2); + write_octeon_64bit_block_dword(block[3], 3); + write_octeon_64bit_block_dword(block[4], 4); + write_octeon_64bit_block_dword(block[5], 5); + write_octeon_64bit_block_dword(block[6], 6); + octeon_sha1_start(block[7]); +} + +static int octeon_sha1_init(struct shash_desc *desc) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA1_H0; + sctx->state[1] = SHA1_H1; + sctx->state[2] = SHA1_H2; + sctx->state[3] = SHA1_H3; + sctx->state[4] = SHA1_H4; + sctx->count = 0; + + return 0; +} + +static void __octeon_sha1_update(struct sha1_state *sctx, const u8 *data, + unsigned int len) +{ + unsigned int partial; + unsigned int done; + const u8 *src; + + partial = sctx->count % SHA1_BLOCK_SIZE; + sctx->count += len; + done = 0; + src = data; + + if ((partial + len) >= SHA1_BLOCK_SIZE) { + if (partial) { + done = -partial; + memcpy(sctx->buffer + partial, data, + done + SHA1_BLOCK_SIZE); + src = sctx->buffer; + } + + do { + octeon_sha1_transform(src); + done += SHA1_BLOCK_SIZE; + src = data + done; + } while (done + SHA1_BLOCK_SIZE <= len); + + partial = 0; + } + memcpy(sctx->buffer + partial, src, len - done); +} + +static int octeon_sha1_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + struct octeon_cop2_state state; + unsigned long flags; + + /* + * Small updates never reach the crypto engine, so the generic sha1 is + * faster because of the heavyweight octeon_crypto_enable() / + * octeon_crypto_disable(). + */ + if ((sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE) + return crypto_sha1_update(desc, data, len); + + flags = octeon_crypto_enable(&state); + octeon_sha1_store_hash(sctx); + + __octeon_sha1_update(sctx, data, len); + + octeon_sha1_read_hash(sctx); + octeon_crypto_disable(&state, flags); + + return 0; +} + +static int octeon_sha1_final(struct shash_desc *desc, u8 *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + static const u8 padding[64] = { 0x80, }; + struct octeon_cop2_state state; + __be32 *dst = (__be32 *)out; + unsigned int pad_len; + unsigned long flags; + unsigned int index; + __be64 bits; + int i; + + /* Save number of bits. */ + bits = cpu_to_be64(sctx->count << 3); + + /* Pad out to 56 mod 64. */ + index = sctx->count & 0x3f; + pad_len = (index < 56) ? (56 - index) : ((64+56) - index); + + flags = octeon_crypto_enable(&state); + octeon_sha1_store_hash(sctx); + + __octeon_sha1_update(sctx, padding, pad_len); + + /* Append length (before padding). */ + __octeon_sha1_update(sctx, (const u8 *)&bits, sizeof(bits)); + + octeon_sha1_read_hash(sctx); + octeon_crypto_disable(&state, flags); + + /* Store state in digest */ + for (i = 0; i < 5; i++) + dst[i] = cpu_to_be32(sctx->state[i]); + + /* Zeroize sensitive information. */ + memset(sctx, 0, sizeof(*sctx)); + + return 0; +} + +static int octeon_sha1_export(struct shash_desc *desc, void *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(out, sctx, sizeof(*sctx)); + return 0; +} + +static int octeon_sha1_import(struct shash_desc *desc, const void *in) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(sctx, in, sizeof(*sctx)); + return 0; +} + +static struct shash_alg octeon_sha1_alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = octeon_sha1_init, + .update = octeon_sha1_update, + .final = octeon_sha1_final, + .export = octeon_sha1_export, + .import = octeon_sha1_import, + .descsize = sizeof(struct sha1_state), + .statesize = sizeof(struct sha1_state), + .base = { + .cra_name = "sha1", + .cra_driver_name= "octeon-sha1", + .cra_priority = OCTEON_CR_OPCODE_PRIORITY, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init octeon_sha1_mod_init(void) +{ + if (!octeon_has_crypto()) + return -ENOTSUPP; + return crypto_register_shash(&octeon_sha1_alg); +} + +static void __exit octeon_sha1_mod_fini(void) +{ + crypto_unregister_shash(&octeon_sha1_alg); +} + +module_init(octeon_sha1_mod_init); +module_exit(octeon_sha1_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (OCTEON)"); +MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); diff --git a/arch/mips/cavium-octeon/crypto/octeon-sha256.c b/arch/mips/cavium-octeon/crypto/octeon-sha256.c new file mode 100644 index 000000000..8b931e640 --- /dev/null +++ b/arch/mips/cavium-octeon/crypto/octeon-sha256.c @@ -0,0 +1,278 @@ +/* + * Cryptographic API. + * + * SHA-224 and SHA-256 Secure Hash Algorithm. + * + * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>. + * + * Based on crypto/sha256_generic.c, which is: + * + * Copyright (c) Jean-Luc Cooke <jlcooke@certainkey.com> + * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk> + * Copyright (c) 2002 James Morris <jmorris@intercode.com.au> + * SHA224 Support Copyright 2007 Intel Corporation <jonathan.lynch@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/mm.h> +#include <crypto/sha.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <asm/byteorder.h> +#include <asm/octeon/octeon.h> +#include <crypto/internal/hash.h> + +#include "octeon-crypto.h" + +/* + * We pass everything as 64-bit. OCTEON can handle misaligned data. + */ + +static void octeon_sha256_store_hash(struct sha256_state *sctx) +{ + u64 *hash = (u64 *)sctx->state; + + write_octeon_64bit_hash_dword(hash[0], 0); + write_octeon_64bit_hash_dword(hash[1], 1); + write_octeon_64bit_hash_dword(hash[2], 2); + write_octeon_64bit_hash_dword(hash[3], 3); +} + +static void octeon_sha256_read_hash(struct sha256_state *sctx) +{ + u64 *hash = (u64 *)sctx->state; + + hash[0] = read_octeon_64bit_hash_dword(0); + hash[1] = read_octeon_64bit_hash_dword(1); + hash[2] = read_octeon_64bit_hash_dword(2); + hash[3] = read_octeon_64bit_hash_dword(3); +} + +static void octeon_sha256_transform(const void *_block) +{ + const u64 *block = _block; + + write_octeon_64bit_block_dword(block[0], 0); + write_octeon_64bit_block_dword(block[1], 1); + write_octeon_64bit_block_dword(block[2], 2); + write_octeon_64bit_block_dword(block[3], 3); + write_octeon_64bit_block_dword(block[4], 4); + write_octeon_64bit_block_dword(block[5], 5); + write_octeon_64bit_block_dword(block[6], 6); + octeon_sha256_start(block[7]); +} + +static int octeon_sha224_init(struct shash_desc *desc) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA224_H0; + sctx->state[1] = SHA224_H1; + sctx->state[2] = SHA224_H2; + sctx->state[3] = SHA224_H3; + sctx->state[4] = SHA224_H4; + sctx->state[5] = SHA224_H5; + sctx->state[6] = SHA224_H6; + sctx->state[7] = SHA224_H7; + sctx->count = 0; + + return 0; +} + +static int octeon_sha256_init(struct shash_desc *desc) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA256_H0; + sctx->state[1] = SHA256_H1; + sctx->state[2] = SHA256_H2; + sctx->state[3] = SHA256_H3; + sctx->state[4] = SHA256_H4; + sctx->state[5] = SHA256_H5; + sctx->state[6] = SHA256_H6; + sctx->state[7] = SHA256_H7; + sctx->count = 0; + + return 0; +} + +static void __octeon_sha256_update(struct sha256_state *sctx, const u8 *data, + unsigned int len) +{ + unsigned int partial; + unsigned int done; + const u8 *src; + + partial = sctx->count % SHA256_BLOCK_SIZE; + sctx->count += len; + done = 0; + src = data; + + if ((partial + len) >= SHA256_BLOCK_SIZE) { + if (partial) { + done = -partial; + memcpy(sctx->buf + partial, data, + done + SHA256_BLOCK_SIZE); + src = sctx->buf; + } + + do { + octeon_sha256_transform(src); + done += SHA256_BLOCK_SIZE; + src = data + done; + } while (done + SHA256_BLOCK_SIZE <= len); + + partial = 0; + } + memcpy(sctx->buf + partial, src, len - done); +} + +static int octeon_sha256_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + struct octeon_cop2_state state; + unsigned long flags; + + /* + * Small updates never reach the crypto engine, so the generic sha256 is + * faster because of the heavyweight octeon_crypto_enable() / + * octeon_crypto_disable(). + */ + if ((sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE) + return crypto_sha256_update(desc, data, len); + + flags = octeon_crypto_enable(&state); + octeon_sha256_store_hash(sctx); + + __octeon_sha256_update(sctx, data, len); + + octeon_sha256_read_hash(sctx); + octeon_crypto_disable(&state, flags); + + return 0; +} + +static int octeon_sha256_final(struct shash_desc *desc, u8 *out) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + static const u8 padding[64] = { 0x80, }; + struct octeon_cop2_state state; + __be32 *dst = (__be32 *)out; + unsigned int pad_len; + unsigned long flags; + unsigned int index; + __be64 bits; + int i; + + /* Save number of bits. */ + bits = cpu_to_be64(sctx->count << 3); + + /* Pad out to 56 mod 64. */ + index = sctx->count & 0x3f; + pad_len = (index < 56) ? (56 - index) : ((64+56) - index); + + flags = octeon_crypto_enable(&state); + octeon_sha256_store_hash(sctx); + + __octeon_sha256_update(sctx, padding, pad_len); + + /* Append length (before padding). */ + __octeon_sha256_update(sctx, (const u8 *)&bits, sizeof(bits)); + + octeon_sha256_read_hash(sctx); + octeon_crypto_disable(&state, flags); + + /* Store state in digest */ + for (i = 0; i < 8; i++) + dst[i] = cpu_to_be32(sctx->state[i]); + + /* Zeroize sensitive information. */ + memset(sctx, 0, sizeof(*sctx)); + + return 0; +} + +static int octeon_sha224_final(struct shash_desc *desc, u8 *hash) +{ + u8 D[SHA256_DIGEST_SIZE]; + + octeon_sha256_final(desc, D); + + memcpy(hash, D, SHA224_DIGEST_SIZE); + memzero_explicit(D, SHA256_DIGEST_SIZE); + + return 0; +} + +static int octeon_sha256_export(struct shash_desc *desc, void *out) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + memcpy(out, sctx, sizeof(*sctx)); + return 0; +} + +static int octeon_sha256_import(struct shash_desc *desc, const void *in) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + memcpy(sctx, in, sizeof(*sctx)); + return 0; +} + +static struct shash_alg octeon_sha256_algs[2] = { { + .digestsize = SHA256_DIGEST_SIZE, + .init = octeon_sha256_init, + .update = octeon_sha256_update, + .final = octeon_sha256_final, + .export = octeon_sha256_export, + .import = octeon_sha256_import, + .descsize = sizeof(struct sha256_state), + .statesize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha256", + .cra_driver_name= "octeon-sha256", + .cra_priority = OCTEON_CR_OPCODE_PRIORITY, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA224_DIGEST_SIZE, + .init = octeon_sha224_init, + .update = octeon_sha256_update, + .final = octeon_sha224_final, + .descsize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha224", + .cra_driver_name= "octeon-sha224", + .cra_blocksize = SHA224_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init octeon_sha256_mod_init(void) +{ + if (!octeon_has_crypto()) + return -ENOTSUPP; + return crypto_register_shashes(octeon_sha256_algs, + ARRAY_SIZE(octeon_sha256_algs)); +} + +static void __exit octeon_sha256_mod_fini(void) +{ + crypto_unregister_shashes(octeon_sha256_algs, + ARRAY_SIZE(octeon_sha256_algs)); +} + +module_init(octeon_sha256_mod_init); +module_exit(octeon_sha256_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm (OCTEON)"); +MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); diff --git a/arch/mips/cavium-octeon/crypto/octeon-sha512.c b/arch/mips/cavium-octeon/crypto/octeon-sha512.c new file mode 100644 index 000000000..6c9561496 --- /dev/null +++ b/arch/mips/cavium-octeon/crypto/octeon-sha512.c @@ -0,0 +1,275 @@ +/* + * Cryptographic API. + * + * SHA-512 and SHA-384 Secure Hash Algorithm. + * + * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>. + * + * Based on crypto/sha512_generic.c, which is: + * + * Copyright (c) Jean-Luc Cooke <jlcooke@certainkey.com> + * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk> + * Copyright (c) 2003 Kyle McMartin <kyle@debian.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + */ + +#include <linux/mm.h> +#include <crypto/sha.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/module.h> +#include <asm/byteorder.h> +#include <asm/octeon/octeon.h> +#include <crypto/internal/hash.h> + +#include "octeon-crypto.h" + +/* + * We pass everything as 64-bit. OCTEON can handle misaligned data. + */ + +static void octeon_sha512_store_hash(struct sha512_state *sctx) +{ + write_octeon_64bit_hash_sha512(sctx->state[0], 0); + write_octeon_64bit_hash_sha512(sctx->state[1], 1); + write_octeon_64bit_hash_sha512(sctx->state[2], 2); + write_octeon_64bit_hash_sha512(sctx->state[3], 3); + write_octeon_64bit_hash_sha512(sctx->state[4], 4); + write_octeon_64bit_hash_sha512(sctx->state[5], 5); + write_octeon_64bit_hash_sha512(sctx->state[6], 6); + write_octeon_64bit_hash_sha512(sctx->state[7], 7); +} + +static void octeon_sha512_read_hash(struct sha512_state *sctx) +{ + sctx->state[0] = read_octeon_64bit_hash_sha512(0); + sctx->state[1] = read_octeon_64bit_hash_sha512(1); + sctx->state[2] = read_octeon_64bit_hash_sha512(2); + sctx->state[3] = read_octeon_64bit_hash_sha512(3); + sctx->state[4] = read_octeon_64bit_hash_sha512(4); + sctx->state[5] = read_octeon_64bit_hash_sha512(5); + sctx->state[6] = read_octeon_64bit_hash_sha512(6); + sctx->state[7] = read_octeon_64bit_hash_sha512(7); +} + +static void octeon_sha512_transform(const void *_block) +{ + const u64 *block = _block; + + write_octeon_64bit_block_sha512(block[0], 0); + write_octeon_64bit_block_sha512(block[1], 1); + write_octeon_64bit_block_sha512(block[2], 2); + write_octeon_64bit_block_sha512(block[3], 3); + write_octeon_64bit_block_sha512(block[4], 4); + write_octeon_64bit_block_sha512(block[5], 5); + write_octeon_64bit_block_sha512(block[6], 6); + write_octeon_64bit_block_sha512(block[7], 7); + write_octeon_64bit_block_sha512(block[8], 8); + write_octeon_64bit_block_sha512(block[9], 9); + write_octeon_64bit_block_sha512(block[10], 10); + write_octeon_64bit_block_sha512(block[11], 11); + write_octeon_64bit_block_sha512(block[12], 12); + write_octeon_64bit_block_sha512(block[13], 13); + write_octeon_64bit_block_sha512(block[14], 14); + octeon_sha512_start(block[15]); +} + +static int octeon_sha512_init(struct shash_desc *desc) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA512_H0; + sctx->state[1] = SHA512_H1; + sctx->state[2] = SHA512_H2; + sctx->state[3] = SHA512_H3; + sctx->state[4] = SHA512_H4; + sctx->state[5] = SHA512_H5; + sctx->state[6] = SHA512_H6; + sctx->state[7] = SHA512_H7; + sctx->count[0] = sctx->count[1] = 0; + + return 0; +} + +static int octeon_sha384_init(struct shash_desc *desc) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA384_H0; + sctx->state[1] = SHA384_H1; + sctx->state[2] = SHA384_H2; + sctx->state[3] = SHA384_H3; + sctx->state[4] = SHA384_H4; + sctx->state[5] = SHA384_H5; + sctx->state[6] = SHA384_H6; + sctx->state[7] = SHA384_H7; + sctx->count[0] = sctx->count[1] = 0; + + return 0; +} + +static void __octeon_sha512_update(struct sha512_state *sctx, const u8 *data, + unsigned int len) +{ + unsigned int part_len; + unsigned int index; + unsigned int i; + + /* Compute number of bytes mod 128. */ + index = sctx->count[0] % SHA512_BLOCK_SIZE; + + /* Update number of bytes. */ + if ((sctx->count[0] += len) < len) + sctx->count[1]++; + + part_len = SHA512_BLOCK_SIZE - index; + + /* Transform as many times as possible. */ + if (len >= part_len) { + memcpy(&sctx->buf[index], data, part_len); + octeon_sha512_transform(sctx->buf); + + for (i = part_len; i + SHA512_BLOCK_SIZE <= len; + i += SHA512_BLOCK_SIZE) + octeon_sha512_transform(&data[i]); + + index = 0; + } else { + i = 0; + } + + /* Buffer remaining input. */ + memcpy(&sctx->buf[index], &data[i], len - i); +} + +static int octeon_sha512_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + struct octeon_cop2_state state; + unsigned long flags; + + /* + * Small updates never reach the crypto engine, so the generic sha512 is + * faster because of the heavyweight octeon_crypto_enable() / + * octeon_crypto_disable(). + */ + if ((sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE) + return crypto_sha512_update(desc, data, len); + + flags = octeon_crypto_enable(&state); + octeon_sha512_store_hash(sctx); + + __octeon_sha512_update(sctx, data, len); + + octeon_sha512_read_hash(sctx); + octeon_crypto_disable(&state, flags); + + return 0; +} + +static int octeon_sha512_final(struct shash_desc *desc, u8 *hash) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + static u8 padding[128] = { 0x80, }; + struct octeon_cop2_state state; + __be64 *dst = (__be64 *)hash; + unsigned int pad_len; + unsigned long flags; + unsigned int index; + __be64 bits[2]; + int i; + + /* Save number of bits. */ + bits[1] = cpu_to_be64(sctx->count[0] << 3); + bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61); + + /* Pad out to 112 mod 128. */ + index = sctx->count[0] & 0x7f; + pad_len = (index < 112) ? (112 - index) : ((128+112) - index); + + flags = octeon_crypto_enable(&state); + octeon_sha512_store_hash(sctx); + + __octeon_sha512_update(sctx, padding, pad_len); + + /* Append length (before padding). */ + __octeon_sha512_update(sctx, (const u8 *)bits, sizeof(bits)); + + octeon_sha512_read_hash(sctx); + octeon_crypto_disable(&state, flags); + + /* Store state in digest. */ + for (i = 0; i < 8; i++) + dst[i] = cpu_to_be64(sctx->state[i]); + + /* Zeroize sensitive information. */ + memset(sctx, 0, sizeof(struct sha512_state)); + + return 0; +} + +static int octeon_sha384_final(struct shash_desc *desc, u8 *hash) +{ + u8 D[64]; + + octeon_sha512_final(desc, D); + + memcpy(hash, D, 48); + memzero_explicit(D, 64); + + return 0; +} + +static struct shash_alg octeon_sha512_algs[2] = { { + .digestsize = SHA512_DIGEST_SIZE, + .init = octeon_sha512_init, + .update = octeon_sha512_update, + .final = octeon_sha512_final, + .descsize = sizeof(struct sha512_state), + .base = { + .cra_name = "sha512", + .cra_driver_name= "octeon-sha512", + .cra_priority = OCTEON_CR_OPCODE_PRIORITY, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA384_DIGEST_SIZE, + .init = octeon_sha384_init, + .update = octeon_sha512_update, + .final = octeon_sha384_final, + .descsize = sizeof(struct sha512_state), + .base = { + .cra_name = "sha384", + .cra_driver_name= "octeon-sha384", + .cra_priority = OCTEON_CR_OPCODE_PRIORITY, + .cra_blocksize = SHA384_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init octeon_sha512_mod_init(void) +{ + if (!octeon_has_crypto()) + return -ENOTSUPP; + return crypto_register_shashes(octeon_sha512_algs, + ARRAY_SIZE(octeon_sha512_algs)); +} + +static void __exit octeon_sha512_mod_fini(void) +{ + crypto_unregister_shashes(octeon_sha512_algs, + ARRAY_SIZE(octeon_sha512_algs)); +} + +module_init(octeon_sha512_mod_init); +module_exit(octeon_sha512_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA-512 and SHA-384 Secure Hash Algorithms (OCTEON)"); +MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c new file mode 100644 index 000000000..39f153fe0 --- /dev/null +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -0,0 +1,213 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + * Copyright (C) 2009, 2012 Cavium, Inc. + */ +#include <linux/clocksource.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/cpu-info.h> +#include <asm/cpu-type.h> +#include <asm/time.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-ipd-defs.h> +#include <asm/octeon/cvmx-mio-defs.h> +#include <asm/octeon/cvmx-rst-defs.h> +#include <asm/octeon/cvmx-fpa-defs.h> + +static u64 f; +static u64 rdiv; +static u64 sdiv; +static u64 octeon_udelay_factor; +static u64 octeon_ndelay_factor; + +void __init octeon_setup_delays(void) +{ + octeon_udelay_factor = octeon_get_clock_rate() / 1000000; + /* + * For __ndelay we divide by 2^16, so the factor is multiplied + * by the same amount. + */ + octeon_ndelay_factor = (octeon_udelay_factor * 0x10000ull) / 1000ull; + + preset_lpj = octeon_get_clock_rate() / HZ; + + if (current_cpu_type() == CPU_CAVIUM_OCTEON2) { + union cvmx_mio_rst_boot rst_boot; + + rst_boot.u64 = cvmx_read_csr(CVMX_MIO_RST_BOOT); + rdiv = rst_boot.s.c_mul; /* CPU clock */ + sdiv = rst_boot.s.pnr_mul; /* I/O clock */ + f = (0x8000000000000000ull / sdiv) * 2; + } else if (current_cpu_type() == CPU_CAVIUM_OCTEON3) { + union cvmx_rst_boot rst_boot; + + rst_boot.u64 = cvmx_read_csr(CVMX_RST_BOOT); + rdiv = rst_boot.s.c_mul; /* CPU clock */ + sdiv = rst_boot.s.pnr_mul; /* I/O clock */ + f = (0x8000000000000000ull / sdiv) * 2; + } + +} + +/* + * Set the current core's cvmcount counter to the value of the + * IPD_CLK_COUNT. We do this on all cores as they are brought + * on-line. This allows for a read from a local cpu register to + * access a synchronized counter. + * + * On CPU_CAVIUM_OCTEON2 the IPD_CLK_COUNT is scaled by rdiv/sdiv. + */ +void octeon_init_cvmcount(void) +{ + u64 clk_reg; + unsigned long flags; + unsigned loops = 2; + + clk_reg = octeon_has_feature(OCTEON_FEATURE_FPA3) ? + CVMX_FPA_CLK_COUNT : CVMX_IPD_CLK_COUNT; + + /* Clobber loops so GCC will not unroll the following while loop. */ + asm("" : "+r" (loops)); + + local_irq_save(flags); + /* + * Loop several times so we are executing from the cache, + * which should give more deterministic timing. + */ + while (loops--) { + u64 clk_count = cvmx_read_csr(clk_reg); + if (rdiv != 0) { + clk_count *= rdiv; + if (f != 0) { + asm("dmultu\t%[cnt],%[f]\n\t" + "mfhi\t%[cnt]" + : [cnt] "+r" (clk_count) + : [f] "r" (f) + : "hi", "lo"); + } + } + write_c0_cvmcount(clk_count); + } + local_irq_restore(flags); +} + +static u64 octeon_cvmcount_read(struct clocksource *cs) +{ + return read_c0_cvmcount(); +} + +static struct clocksource clocksource_mips = { + .name = "OCTEON_CVMCOUNT", + .read = octeon_cvmcount_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +unsigned long long notrace sched_clock(void) +{ + /* 64-bit arithmatic can overflow, so use 128-bit. */ + u64 t1, t2, t3; + unsigned long long rv; + u64 mult = clocksource_mips.mult; + u64 shift = clocksource_mips.shift; + u64 cnt = read_c0_cvmcount(); + + asm ( + "dmultu\t%[cnt],%[mult]\n\t" + "nor\t%[t1],$0,%[shift]\n\t" + "mfhi\t%[t2]\n\t" + "mflo\t%[t3]\n\t" + "dsll\t%[t2],%[t2],1\n\t" + "dsrlv\t%[rv],%[t3],%[shift]\n\t" + "dsllv\t%[t1],%[t2],%[t1]\n\t" + "or\t%[rv],%[t1],%[rv]\n\t" + : [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3) + : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift) + : "hi", "lo"); + return rv; +} + +void __init plat_time_init(void) +{ + clocksource_mips.rating = 300; + clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate()); +} + +void __udelay(unsigned long us) +{ + u64 cur, end, inc; + + cur = read_c0_cvmcount(); + + inc = us * octeon_udelay_factor; + end = cur + inc; + + while (end > cur) + cur = read_c0_cvmcount(); +} +EXPORT_SYMBOL(__udelay); + +void __ndelay(unsigned long ns) +{ + u64 cur, end, inc; + + cur = read_c0_cvmcount(); + + inc = ((ns * octeon_ndelay_factor) >> 16); + end = cur + inc; + + while (end > cur) + cur = read_c0_cvmcount(); +} +EXPORT_SYMBOL(__ndelay); + +void __delay(unsigned long loops) +{ + u64 cur, end; + + cur = read_c0_cvmcount(); + end = cur + loops; + + while (end > cur) + cur = read_c0_cvmcount(); +} +EXPORT_SYMBOL(__delay); + + +/** + * octeon_io_clk_delay - wait for a given number of io clock cycles to pass. + * + * We scale the wait by the clock ratio, and then wait for the + * corresponding number of core clocks. + * + * @count: The number of clocks to wait. + */ +void octeon_io_clk_delay(unsigned long count) +{ + u64 cur, end; + + cur = read_c0_cvmcount(); + if (rdiv != 0) { + end = count * rdiv; + if (f != 0) { + asm("dmultu\t%[cnt],%[f]\n\t" + "mfhi\t%[cnt]" + : [cnt] "+r" (end) + : [f] "r" (f) + : "hi", "lo"); + } + end = cur + end; + } else { + end = cur + count; + } + while (end > cur) + cur = read_c0_cvmcount(); +} +EXPORT_SYMBOL(octeon_io_clk_delay); diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c new file mode 100644 index 000000000..236833be6 --- /dev/null +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -0,0 +1,251 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> + * Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org> + * Copyright (C) 2005 Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com> + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + * IP32 changes by Ilya. + * Copyright (C) 2010 Cavium Networks, Inc. + */ +#include <linux/dma-direct.h> +#include <linux/bootmem.h> +#include <linux/swiotlb.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/bootinfo.h> + +#include <asm/octeon/octeon.h> + +#ifdef CONFIG_PCI +#include <linux/pci.h> +#include <asm/octeon/pci-octeon.h> +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-pci-defs.h> + +struct octeon_dma_map_ops { + dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr); + phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr); +}; + +static dma_addr_t octeon_hole_phys_to_dma(phys_addr_t paddr) +{ + if (paddr >= CVMX_PCIE_BAR1_PHYS_BASE && paddr < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE)) + return paddr - CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_RC_BASE; + else + return paddr; +} + +static phys_addr_t octeon_hole_dma_to_phys(dma_addr_t daddr) +{ + if (daddr >= CVMX_PCIE_BAR1_RC_BASE) + return daddr + CVMX_PCIE_BAR1_PHYS_BASE - CVMX_PCIE_BAR1_RC_BASE; + else + return daddr; +} + +static dma_addr_t octeon_gen1_phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + if (paddr >= 0x410000000ull && paddr < 0x420000000ull) + paddr -= 0x400000000ull; + return octeon_hole_phys_to_dma(paddr); +} + +static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + daddr = octeon_hole_dma_to_phys(daddr); + + if (daddr >= 0x10000000ull && daddr < 0x20000000ull) + daddr += 0x400000000ull; + + return daddr; +} + +static const struct octeon_dma_map_ops octeon_gen1_ops = { + .phys_to_dma = octeon_gen1_phys_to_dma, + .dma_to_phys = octeon_gen1_dma_to_phys, +}; + +static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return octeon_hole_phys_to_dma(paddr); +} + +static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + return octeon_hole_dma_to_phys(daddr); +} + +static const struct octeon_dma_map_ops octeon_gen2_ops = { + .phys_to_dma = octeon_gen2_phys_to_dma, + .dma_to_phys = octeon_gen2_dma_to_phys, +}; + +static dma_addr_t octeon_big_phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + if (paddr >= 0x410000000ull && paddr < 0x420000000ull) + paddr -= 0x400000000ull; + + /* Anything in the BAR1 hole or above goes via BAR2 */ + if (paddr >= 0xf0000000ull) + paddr = OCTEON_BAR2_PCI_ADDRESS + paddr; + + return paddr; +} + +static phys_addr_t octeon_big_dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + if (daddr >= OCTEON_BAR2_PCI_ADDRESS) + daddr -= OCTEON_BAR2_PCI_ADDRESS; + + if (daddr >= 0x10000000ull && daddr < 0x20000000ull) + daddr += 0x400000000ull; + return daddr; +} + +static const struct octeon_dma_map_ops octeon_big_ops = { + .phys_to_dma = octeon_big_phys_to_dma, + .dma_to_phys = octeon_big_dma_to_phys, +}; + +static dma_addr_t octeon_small_phys_to_dma(struct device *dev, + phys_addr_t paddr) +{ + if (paddr >= 0x410000000ull && paddr < 0x420000000ull) + paddr -= 0x400000000ull; + + /* Anything not in the BAR1 range goes via BAR2 */ + if (paddr >= octeon_bar1_pci_phys && paddr < octeon_bar1_pci_phys + 0x8000000ull) + paddr = paddr - octeon_bar1_pci_phys; + else + paddr = OCTEON_BAR2_PCI_ADDRESS + paddr; + + return paddr; +} + +static phys_addr_t octeon_small_dma_to_phys(struct device *dev, + dma_addr_t daddr) +{ + if (daddr >= OCTEON_BAR2_PCI_ADDRESS) + daddr -= OCTEON_BAR2_PCI_ADDRESS; + else + daddr += octeon_bar1_pci_phys; + + if (daddr >= 0x10000000ull && daddr < 0x20000000ull) + daddr += 0x400000000ull; + return daddr; +} + +static const struct octeon_dma_map_ops octeon_small_ops = { + .phys_to_dma = octeon_small_phys_to_dma, + .dma_to_phys = octeon_small_dma_to_phys, +}; + +static const struct octeon_dma_map_ops *octeon_pci_dma_ops; + +void __init octeon_pci_dma_init(void) +{ + switch (octeon_dma_bar_type) { + case OCTEON_DMA_BAR_TYPE_PCIE: + octeon_pci_dma_ops = &octeon_gen1_ops; + break; + case OCTEON_DMA_BAR_TYPE_PCIE2: + octeon_pci_dma_ops = &octeon_gen2_ops; + break; + case OCTEON_DMA_BAR_TYPE_BIG: + octeon_pci_dma_ops = &octeon_big_ops; + break; + case OCTEON_DMA_BAR_TYPE_SMALL: + octeon_pci_dma_ops = &octeon_small_ops; + break; + default: + BUG(); + } +} +#endif /* CONFIG_PCI */ + +dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) +{ +#ifdef CONFIG_PCI + if (dev && dev_is_pci(dev)) + return octeon_pci_dma_ops->phys_to_dma(dev, paddr); +#endif + return paddr; +} + +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr) +{ +#ifdef CONFIG_PCI + if (dev && dev_is_pci(dev)) + return octeon_pci_dma_ops->dma_to_phys(dev, daddr); +#endif + return daddr; +} + +char *octeon_swiotlb; + +void __init plat_swiotlb_setup(void) +{ + int i; + phys_addr_t max_addr; + phys_addr_t addr_size; + size_t swiotlbsize; + unsigned long swiotlb_nslabs; + + max_addr = 0; + addr_size = 0; + + for (i = 0 ; i < boot_mem_map.nr_map; i++) { + struct boot_mem_map_entry *e = &boot_mem_map.map[i]; + if (e->type != BOOT_MEM_RAM && e->type != BOOT_MEM_INIT_RAM) + continue; + + /* These addresses map low for PCI. */ + if (e->addr > 0x410000000ull && !OCTEON_IS_OCTEON2()) + continue; + + addr_size += e->size; + + if (max_addr < e->addr + e->size) + max_addr = e->addr + e->size; + + } + + swiotlbsize = PAGE_SIZE; + +#ifdef CONFIG_PCI + /* + * For OCTEON_DMA_BAR_TYPE_SMALL, size the iotlb at 1/4 memory + * size to a maximum of 64MB + */ + if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2)) { + swiotlbsize = addr_size / 4; + if (swiotlbsize > 64 * (1<<20)) + swiotlbsize = 64 * (1<<20); + } else if (max_addr > 0xf0000000ul) { + /* + * Otherwise only allocate a big iotlb if there is + * memory past the BAR1 hole. + */ + swiotlbsize = 64 * (1<<20); + } +#endif +#ifdef CONFIG_USB_OHCI_HCD_PLATFORM + /* OCTEON II ohci is only 32-bit. */ + if (OCTEON_IS_OCTEON2() && max_addr >= 0x100000000ul) + swiotlbsize = 64 * (1<<20); +#endif + swiotlb_nslabs = swiotlbsize >> IO_TLB_SHIFT; + swiotlb_nslabs = ALIGN(swiotlb_nslabs, IO_TLB_SEGSIZE); + swiotlbsize = swiotlb_nslabs << IO_TLB_SHIFT; + + octeon_swiotlb = alloc_bootmem_low_pages(swiotlbsize); + + if (swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1) == -ENOMEM) + panic("Cannot allocate SWIOTLB buffer"); +} diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile new file mode 100644 index 000000000..50b427879 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the Cavium Octeon specific kernel interface routines +# under Linux. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2005-2008 Cavium Networks +# + +obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o +obj-y += cvmx-pko.o cvmx-spi.o cvmx-cmd-queue.o \ + cvmx-helper-board.o cvmx-helper.o cvmx-helper-xaui.o \ + cvmx-helper-rgmii.o cvmx-helper-sgmii.o cvmx-helper-npi.o \ + cvmx-helper-loop.o cvmx-helper-spi.o cvmx-helper-util.o \ + cvmx-interrupt-decodes.o cvmx-interrupt-rsl.o + +obj-y += cvmx-helper-errata.o cvmx-helper-jtag.o cvmx-boot-vector.o diff --git a/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c new file mode 100644 index 000000000..b7019d218 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c @@ -0,0 +1,167 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2017 Cavium, Inc. + */ + + +/* + We install this program at the bootvector: +------------------------------------ + .set noreorder + .set nomacro + .set noat +reset_vector: + dmtc0 $k0, $31, 0 # Save $k0 to DESAVE + dmtc0 $k1, $31, 3 # Save $k1 to KScratch2 + + mfc0 $k0, $12, 0 # Status + mfc0 $k1, $15, 1 # Ebase + + ori $k0, 0x84 # Enable 64-bit addressing, set + # ERL (should already be set) + andi $k1, 0x3ff # mask out core ID + + mtc0 $k0, $12, 0 # Status + sll $k1, 5 + + lui $k0, 0xbfc0 + cache 17, 0($0) # Core-14345, clear L1 Dcache virtual + # tags if the core hit an NMI + + ld $k0, 0x78($k0) # k0 <- (bfc00078) pointer to the reset vector + synci 0($0) # Invalidate ICache to get coherent + # view of target code. + + daddu $k0, $k0, $k1 + nop + + ld $k0, 0($k0) # k0 <- core specific target address + dmfc0 $k1, $31, 3 # Restore $k1 from KScratch2 + + beqz $k0, wait_loop # Spin in wait loop + nop + + jr $k0 + nop + + nop # NOPs needed here to fill delay slots + nop # on endian reversal of previous instructions + +wait_loop: + wait + nop + + b wait_loop + nop + + nop + nop +------------------------------------ + +0000000000000000 <reset_vector>: + 0: 40baf800 dmtc0 k0,c0_desave + 4: 40bbf803 dmtc0 k1,c0_kscratch2 + + 8: 401a6000 mfc0 k0,c0_status + c: 401b7801 mfc0 k1,c0_ebase + + 10: 375a0084 ori k0,k0,0x84 + 14: 337b03ff andi k1,k1,0x3ff + + 18: 409a6000 mtc0 k0,c0_status + 1c: 001bd940 sll k1,k1,0x5 + + 20: 3c1abfc0 lui k0,0xbfc0 + 24: bc110000 cache 0x11,0(zero) + + 28: df5a0078 ld k0,120(k0) + 2c: 041f0000 synci 0(zero) + + 30: 035bd02d daddu k0,k0,k1 + 34: 00000000 nop + + 38: df5a0000 ld k0,0(k0) + 3c: 403bf803 dmfc0 k1,c0_kscratch2 + + 40: 13400005 beqz k0,58 <wait_loop> + 44: 00000000 nop + + 48: 03400008 jr k0 + 4c: 00000000 nop + + 50: 00000000 nop + 54: 00000000 nop + +0000000000000058 <wait_loop>: + 58: 42000020 wait + 5c: 00000000 nop + + 60: 1000fffd b 58 <wait_loop> + 64: 00000000 nop + + 68: 00000000 nop + 6c: 00000000 nop + + */ + +#include <asm/octeon/cvmx-boot-vector.h> + +static unsigned long long _cvmx_bootvector_data[16] = { + 0x40baf80040bbf803ull, /* patch low order 8-bits if no KScratch*/ + 0x401a6000401b7801ull, + 0x375a0084337b03ffull, + 0x409a6000001bd940ull, + 0x3c1abfc0bc110000ull, + 0xdf5a0078041f0000ull, + 0x035bd02d00000000ull, + 0xdf5a0000403bf803ull, /* patch low order 8-bits if no KScratch*/ + 0x1340000500000000ull, + 0x0340000800000000ull, + 0x0000000000000000ull, + 0x4200002000000000ull, + 0x1000fffd00000000ull, + 0x0000000000000000ull, + OCTEON_BOOT_MOVEABLE_MAGIC1, + 0 /* To be filled in with address of vector block*/ +}; + +/* 2^10 CPUs */ +#define VECTOR_TABLE_SIZE (1024 * sizeof(struct cvmx_boot_vector_element)) + +static void cvmx_boot_vector_init(void *mem) +{ + uint64_t kseg0_mem; + int i; + + memset(mem, 0, VECTOR_TABLE_SIZE); + kseg0_mem = cvmx_ptr_to_phys(mem) | 0x8000000000000000ull; + + for (i = 0; i < 15; i++) { + uint64_t v = _cvmx_bootvector_data[i]; + + if (OCTEON_IS_OCTEON1PLUS() && (i == 0 || i == 7)) + v &= 0xffffffff00000000ull; /* KScratch not availble. */ + cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8); + cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, v); + } + cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, 15 * 8); + cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, kseg0_mem); + cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0x81fc0000); +} + +/** + * Get a pointer to the per-core table of reset vector pointers + * + */ +struct cvmx_boot_vector_element *cvmx_boot_vector_get(void) +{ + struct cvmx_boot_vector_element *ret; + + ret = cvmx_bootmem_alloc_named_range_once(VECTOR_TABLE_SIZE, 0, + (1ull << 32) - 1, 8, "__boot_vector1__", cvmx_boot_vector_init); + return ret; +} +EXPORT_SYMBOL(cvmx_boot_vector_get); diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c new file mode 100644 index 000000000..94d97ebfa --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -0,0 +1,780 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Simple allocate only memory allocator. Used to allocate memory at + * application start time. + */ + +#include <linux/export.h> +#include <linux/kernel.h> + +#include <asm/octeon/cvmx.h> +#include <asm/octeon/cvmx-spinlock.h> +#include <asm/octeon/cvmx-bootmem.h> + +/*#define DEBUG */ + + +static struct cvmx_bootmem_desc *cvmx_bootmem_desc; + +/* See header file for descriptions of functions */ + +/** + * This macro returns the size of a member of a structure. + * Logically it is the same as "sizeof(s::field)" in C++, but + * C lacks the "::" operator. + */ +#define SIZEOF_FIELD(s, field) sizeof(((s *)NULL)->field) + +/** + * This macro returns a member of the + * cvmx_bootmem_named_block_desc_t structure. These members can't + * be directly addressed as they might be in memory not directly + * reachable. In the case where bootmem is compiled with + * LINUX_HOST, the structure itself might be located on a remote + * Octeon. The argument "field" is the member name of the + * cvmx_bootmem_named_block_desc_t to read. Regardless of the type + * of the field, the return type is always a uint64_t. The "addr" + * parameter is the physical address of the structure. + */ +#define CVMX_BOOTMEM_NAMED_GET_FIELD(addr, field) \ + __cvmx_bootmem_desc_get(addr, \ + offsetof(struct cvmx_bootmem_named_block_desc, field), \ + SIZEOF_FIELD(struct cvmx_bootmem_named_block_desc, field)) + +/** + * This function is the implementation of the get macros defined + * for individual structure members. The argument are generated + * by the macros inorder to read only the needed memory. + * + * @param base 64bit physical address of the complete structure + * @param offset Offset from the beginning of the structure to the member being + * accessed. + * @param size Size of the structure member. + * + * @return Value of the structure member promoted into a uint64_t. + */ +static inline uint64_t __cvmx_bootmem_desc_get(uint64_t base, int offset, + int size) +{ + base = (1ull << 63) | (base + offset); + switch (size) { + case 4: + return cvmx_read64_uint32(base); + case 8: + return cvmx_read64_uint64(base); + default: + return 0; + } +} + +/* + * Wrapper functions are provided for reading/writing the size and + * next block values as these may not be directly addressible (in 32 + * bit applications, for instance.) Offsets of data elements in + * bootmem list, must match cvmx_bootmem_block_header_t. + */ +#define NEXT_OFFSET 0 +#define SIZE_OFFSET 8 + +static void cvmx_bootmem_phy_set_size(uint64_t addr, uint64_t size) +{ + cvmx_write64_uint64((addr + SIZE_OFFSET) | (1ull << 63), size); +} + +static void cvmx_bootmem_phy_set_next(uint64_t addr, uint64_t next) +{ + cvmx_write64_uint64((addr + NEXT_OFFSET) | (1ull << 63), next); +} + +static uint64_t cvmx_bootmem_phy_get_size(uint64_t addr) +{ + return cvmx_read64_uint64((addr + SIZE_OFFSET) | (1ull << 63)); +} + +static uint64_t cvmx_bootmem_phy_get_next(uint64_t addr) +{ + return cvmx_read64_uint64((addr + NEXT_OFFSET) | (1ull << 63)); +} + +void *cvmx_bootmem_alloc_range(uint64_t size, uint64_t alignment, + uint64_t min_addr, uint64_t max_addr) +{ + int64_t address; + address = + cvmx_bootmem_phy_alloc(size, min_addr, max_addr, alignment, 0); + + if (address > 0) + return cvmx_phys_to_ptr(address); + else + return NULL; +} + +void *cvmx_bootmem_alloc_address(uint64_t size, uint64_t address, + uint64_t alignment) +{ + return cvmx_bootmem_alloc_range(size, alignment, address, + address + size); +} + +void *cvmx_bootmem_alloc(uint64_t size, uint64_t alignment) +{ + return cvmx_bootmem_alloc_range(size, alignment, 0, 0); +} + +void *cvmx_bootmem_alloc_named_range_once(uint64_t size, uint64_t min_addr, + uint64_t max_addr, uint64_t align, + char *name, + void (*init) (void *)) +{ + int64_t addr; + void *ptr; + uint64_t named_block_desc_addr; + + named_block_desc_addr = (uint64_t) + cvmx_bootmem_phy_named_block_find(name, + (uint32_t)CVMX_BOOTMEM_FLAG_NO_LOCKING); + + if (named_block_desc_addr) { + addr = CVMX_BOOTMEM_NAMED_GET_FIELD(named_block_desc_addr, + base_addr); + return cvmx_phys_to_ptr(addr); + } + + addr = cvmx_bootmem_phy_named_block_alloc(size, min_addr, max_addr, + align, name, + (uint32_t)CVMX_BOOTMEM_FLAG_NO_LOCKING); + + if (addr < 0) + return NULL; + ptr = cvmx_phys_to_ptr(addr); + + if (init) + init(ptr); + else + memset(ptr, 0, size); + + return ptr; +} +EXPORT_SYMBOL(cvmx_bootmem_alloc_named_range_once); + +void *cvmx_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr, + uint64_t max_addr, uint64_t align, + char *name) +{ + int64_t addr; + + addr = cvmx_bootmem_phy_named_block_alloc(size, min_addr, max_addr, + align, name, 0); + if (addr >= 0) + return cvmx_phys_to_ptr(addr); + else + return NULL; +} + +void *cvmx_bootmem_alloc_named_address(uint64_t size, uint64_t address, + char *name) +{ + return cvmx_bootmem_alloc_named_range(size, address, address + size, + 0, name); +} + +void *cvmx_bootmem_alloc_named(uint64_t size, uint64_t alignment, char *name) +{ + return cvmx_bootmem_alloc_named_range(size, 0, 0, alignment, name); +} +EXPORT_SYMBOL(cvmx_bootmem_alloc_named); + +int cvmx_bootmem_free_named(char *name) +{ + return cvmx_bootmem_phy_named_block_free(name, 0); +} + +struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name) +{ + return cvmx_bootmem_phy_named_block_find(name, 0); +} +EXPORT_SYMBOL(cvmx_bootmem_find_named_block); + +void cvmx_bootmem_lock(void) +{ + cvmx_spinlock_lock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock)); +} + +void cvmx_bootmem_unlock(void) +{ + cvmx_spinlock_unlock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock)); +} + +int cvmx_bootmem_init(void *mem_desc_ptr) +{ + /* Here we set the global pointer to the bootmem descriptor + * block. This pointer will be used directly, so we will set + * it up to be directly usable by the application. It is set + * up as follows for the various runtime/ABI combinations: + * + * Linux 64 bit: Set XKPHYS bit + * Linux 32 bit: use mmap to create mapping, use virtual address + * CVMX 64 bit: use physical address directly + * CVMX 32 bit: use physical address directly + * + * Note that the CVMX environment assumes the use of 1-1 TLB + * mappings so that the physical addresses can be used + * directly + */ + if (!cvmx_bootmem_desc) { +#if defined(CVMX_ABI_64) + /* Set XKPHYS bit */ + cvmx_bootmem_desc = cvmx_phys_to_ptr(CAST64(mem_desc_ptr)); +#else + cvmx_bootmem_desc = (struct cvmx_bootmem_desc *) mem_desc_ptr; +#endif + } + + return 0; +} + +/* + * The cvmx_bootmem_phy* functions below return 64 bit physical + * addresses, and expose more features that the cvmx_bootmem_functions + * above. These are required for full memory space access in 32 bit + * applications, as well as for using some advance features. Most + * applications should not need to use these. + */ + +int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min, + uint64_t address_max, uint64_t alignment, + uint32_t flags) +{ + + uint64_t head_addr; + uint64_t ent_addr; + /* points to previous list entry, NULL current entry is head of list */ + uint64_t prev_addr = 0; + uint64_t new_ent_addr = 0; + uint64_t desired_min_addr; + +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_alloc: req_size: 0x%llx, " + "min_addr: 0x%llx, max_addr: 0x%llx, align: 0x%llx\n", + (unsigned long long)req_size, + (unsigned long long)address_min, + (unsigned long long)address_max, + (unsigned long long)alignment); +#endif + + if (cvmx_bootmem_desc->major_version > 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor " + "version: %d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + goto error_out; + } + + /* + * Do a variety of checks to validate the arguments. The + * allocator code will later assume that these checks have + * been made. We validate that the requested constraints are + * not self-contradictory before we look through the list of + * available memory. + */ + + /* 0 is not a valid req_size for this allocator */ + if (!req_size) + goto error_out; + + /* Round req_size up to mult of minimum alignment bytes */ + req_size = (req_size + (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1)) & + ~(CVMX_BOOTMEM_ALIGNMENT_SIZE - 1); + + /* + * Convert !0 address_min and 0 address_max to special case of + * range that specifies an exact memory block to allocate. Do + * this before other checks and adjustments so that this + * tranformation will be validated. + */ + if (address_min && !address_max) + address_max = address_min + req_size; + else if (!address_min && !address_max) + address_max = ~0ull; /* If no limits given, use max limits */ + + + /* + * Enforce minimum alignment (this also keeps the minimum free block + * req_size the same as the alignment req_size. + */ + if (alignment < CVMX_BOOTMEM_ALIGNMENT_SIZE) + alignment = CVMX_BOOTMEM_ALIGNMENT_SIZE; + + /* + * Adjust address minimum based on requested alignment (round + * up to meet alignment). Do this here so we can reject + * impossible requests up front. (NOP for address_min == 0) + */ + if (alignment) + address_min = ALIGN(address_min, alignment); + + /* + * Reject inconsistent args. We have adjusted these, so this + * may fail due to our internal changes even if this check + * would pass for the values the user supplied. + */ + if (req_size > address_max - address_min) + goto error_out; + + /* Walk through the list entries - first fit found is returned */ + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_lock(); + head_addr = cvmx_bootmem_desc->head_addr; + ent_addr = head_addr; + for (; ent_addr; + prev_addr = ent_addr, + ent_addr = cvmx_bootmem_phy_get_next(ent_addr)) { + uint64_t usable_base, usable_max; + uint64_t ent_size = cvmx_bootmem_phy_get_size(ent_addr); + + if (cvmx_bootmem_phy_get_next(ent_addr) + && ent_addr > cvmx_bootmem_phy_get_next(ent_addr)) { + cvmx_dprintf("Internal bootmem_alloc() error: ent: " + "0x%llx, next: 0x%llx\n", + (unsigned long long)ent_addr, + (unsigned long long) + cvmx_bootmem_phy_get_next(ent_addr)); + goto error_out; + } + + /* + * Determine if this is an entry that can satisify the + * request Check to make sure entry is large enough to + * satisfy request. + */ + usable_base = + ALIGN(max(address_min, ent_addr), alignment); + usable_max = min(address_max, ent_addr + ent_size); + /* + * We should be able to allocate block at address + * usable_base. + */ + + desired_min_addr = usable_base; + /* + * Determine if request can be satisfied from the + * current entry. + */ + if (!((ent_addr + ent_size) > usable_base + && ent_addr < address_max + && req_size <= usable_max - usable_base)) + continue; + /* + * We have found an entry that has room to satisfy the + * request, so allocate it from this entry. If end + * CVMX_BOOTMEM_FLAG_END_ALLOC set, then allocate from + * the end of this block rather than the beginning. + */ + if (flags & CVMX_BOOTMEM_FLAG_END_ALLOC) { + desired_min_addr = usable_max - req_size; + /* + * Align desired address down to required + * alignment. + */ + desired_min_addr &= ~(alignment - 1); + } + + /* Match at start of entry */ + if (desired_min_addr == ent_addr) { + if (req_size < ent_size) { + /* + * big enough to create a new block + * from top portion of block. + */ + new_ent_addr = ent_addr + req_size; + cvmx_bootmem_phy_set_next(new_ent_addr, + cvmx_bootmem_phy_get_next(ent_addr)); + cvmx_bootmem_phy_set_size(new_ent_addr, + ent_size - + req_size); + + /* + * Adjust next pointer as following + * code uses this. + */ + cvmx_bootmem_phy_set_next(ent_addr, + new_ent_addr); + } + + /* + * adjust prev ptr or head to remove this + * entry from list. + */ + if (prev_addr) + cvmx_bootmem_phy_set_next(prev_addr, + cvmx_bootmem_phy_get_next(ent_addr)); + else + /* + * head of list being returned, so + * update head ptr. + */ + cvmx_bootmem_desc->head_addr = + cvmx_bootmem_phy_get_next(ent_addr); + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + return desired_min_addr; + } + /* + * block returned doesn't start at beginning of entry, + * so we know that we will be splitting a block off + * the front of this one. Create a new block from the + * beginning, add to list, and go to top of loop + * again. + * + * create new block from high portion of + * block, so that top block starts at desired + * addr. + */ + new_ent_addr = desired_min_addr; + cvmx_bootmem_phy_set_next(new_ent_addr, + cvmx_bootmem_phy_get_next + (ent_addr)); + cvmx_bootmem_phy_set_size(new_ent_addr, + cvmx_bootmem_phy_get_size + (ent_addr) - + (desired_min_addr - + ent_addr)); + cvmx_bootmem_phy_set_size(ent_addr, + desired_min_addr - ent_addr); + cvmx_bootmem_phy_set_next(ent_addr, new_ent_addr); + /* Loop again to handle actual alloc from new block */ + } +error_out: + /* We didn't find anything, so return error */ + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + return -1; +} + +int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) +{ + uint64_t cur_addr; + uint64_t prev_addr = 0; /* zero is invalid */ + int retval = 0; + +#ifdef DEBUG + cvmx_dprintf("__cvmx_bootmem_phy_free addr: 0x%llx, size: 0x%llx\n", + (unsigned long long)phy_addr, (unsigned long long)size); +#endif + if (cvmx_bootmem_desc->major_version > 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor " + "version: %d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + return 0; + } + + /* 0 is not a valid size for this allocator */ + if (!size) + return 0; + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_lock(); + cur_addr = cvmx_bootmem_desc->head_addr; + if (cur_addr == 0 || phy_addr < cur_addr) { + /* add at front of list - special case with changing head ptr */ + if (cur_addr && phy_addr + size > cur_addr) + goto bootmem_free_done; /* error, overlapping section */ + else if (phy_addr + size == cur_addr) { + /* Add to front of existing first block */ + cvmx_bootmem_phy_set_next(phy_addr, + cvmx_bootmem_phy_get_next + (cur_addr)); + cvmx_bootmem_phy_set_size(phy_addr, + cvmx_bootmem_phy_get_size + (cur_addr) + size); + cvmx_bootmem_desc->head_addr = phy_addr; + + } else { + /* New block before first block. OK if cur_addr is 0 */ + cvmx_bootmem_phy_set_next(phy_addr, cur_addr); + cvmx_bootmem_phy_set_size(phy_addr, size); + cvmx_bootmem_desc->head_addr = phy_addr; + } + retval = 1; + goto bootmem_free_done; + } + + /* Find place in list to add block */ + while (cur_addr && phy_addr > cur_addr) { + prev_addr = cur_addr; + cur_addr = cvmx_bootmem_phy_get_next(cur_addr); + } + + if (!cur_addr) { + /* + * We have reached the end of the list, add on to end, + * checking to see if we need to combine with last + * block + */ + if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) == + phy_addr) { + cvmx_bootmem_phy_set_size(prev_addr, + cvmx_bootmem_phy_get_size + (prev_addr) + size); + } else { + cvmx_bootmem_phy_set_next(prev_addr, phy_addr); + cvmx_bootmem_phy_set_size(phy_addr, size); + cvmx_bootmem_phy_set_next(phy_addr, 0); + } + retval = 1; + goto bootmem_free_done; + } else { + /* + * insert between prev and cur nodes, checking for + * merge with either/both. + */ + if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) == + phy_addr) { + /* Merge with previous */ + cvmx_bootmem_phy_set_size(prev_addr, + cvmx_bootmem_phy_get_size + (prev_addr) + size); + if (phy_addr + size == cur_addr) { + /* Also merge with current */ + cvmx_bootmem_phy_set_size(prev_addr, + cvmx_bootmem_phy_get_size(cur_addr) + + cvmx_bootmem_phy_get_size(prev_addr)); + cvmx_bootmem_phy_set_next(prev_addr, + cvmx_bootmem_phy_get_next(cur_addr)); + } + retval = 1; + goto bootmem_free_done; + } else if (phy_addr + size == cur_addr) { + /* Merge with current */ + cvmx_bootmem_phy_set_size(phy_addr, + cvmx_bootmem_phy_get_size + (cur_addr) + size); + cvmx_bootmem_phy_set_next(phy_addr, + cvmx_bootmem_phy_get_next + (cur_addr)); + cvmx_bootmem_phy_set_next(prev_addr, phy_addr); + retval = 1; + goto bootmem_free_done; + } + + /* It is a standalone block, add in between prev and cur */ + cvmx_bootmem_phy_set_size(phy_addr, size); + cvmx_bootmem_phy_set_next(phy_addr, cur_addr); + cvmx_bootmem_phy_set_next(prev_addr, phy_addr); + + } + retval = 1; + +bootmem_free_done: + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + return retval; + +} + +struct cvmx_bootmem_named_block_desc * + cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags) +{ + unsigned int i; + struct cvmx_bootmem_named_block_desc *named_block_array_ptr; + +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_find: %s\n", name); +#endif + /* + * Lock the structure to make sure that it is not being + * changed while we are examining it. + */ + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_lock(); + + /* Use XKPHYS for 64 bit linux */ + named_block_array_ptr = (struct cvmx_bootmem_named_block_desc *) + cvmx_phys_to_ptr(cvmx_bootmem_desc->named_block_array_addr); + +#ifdef DEBUG + cvmx_dprintf + ("cvmx_bootmem_phy_named_block_find: named_block_array_ptr: %p\n", + named_block_array_ptr); +#endif + if (cvmx_bootmem_desc->major_version == 3) { + for (i = 0; + i < cvmx_bootmem_desc->named_block_num_blocks; i++) { + if ((name && named_block_array_ptr[i].size + && !strncmp(name, named_block_array_ptr[i].name, + cvmx_bootmem_desc->named_block_name_len + - 1)) + || (!name && !named_block_array_ptr[i].size)) { + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + + return &(named_block_array_ptr[i]); + } + } + } else { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor " + "version: %d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + } + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + + return NULL; +} + +int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags) +{ + struct cvmx_bootmem_named_block_desc *named_block_ptr; + + if (cvmx_bootmem_desc->major_version != 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor version: " + "%d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + return 0; + } +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_free: %s\n", name); +#endif + + /* + * Take lock here, as name lookup/block free/name free need to + * be atomic. + */ + cvmx_bootmem_lock(); + + named_block_ptr = + cvmx_bootmem_phy_named_block_find(name, + CVMX_BOOTMEM_FLAG_NO_LOCKING); + if (named_block_ptr) { +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_free: " + "%s, base: 0x%llx, size: 0x%llx\n", + name, + (unsigned long long)named_block_ptr->base_addr, + (unsigned long long)named_block_ptr->size); +#endif + __cvmx_bootmem_phy_free(named_block_ptr->base_addr, + named_block_ptr->size, + CVMX_BOOTMEM_FLAG_NO_LOCKING); + named_block_ptr->size = 0; + /* Set size to zero to indicate block not used. */ + } + + cvmx_bootmem_unlock(); + return named_block_ptr != NULL; /* 0 on failure, 1 on success */ +} + +int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, + uint64_t max_addr, + uint64_t alignment, + char *name, + uint32_t flags) +{ + int64_t addr_allocated; + struct cvmx_bootmem_named_block_desc *named_block_desc_ptr; + +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_alloc: size: 0x%llx, min: " + "0x%llx, max: 0x%llx, align: 0x%llx, name: %s\n", + (unsigned long long)size, + (unsigned long long)min_addr, + (unsigned long long)max_addr, + (unsigned long long)alignment, + name); +#endif + if (cvmx_bootmem_desc->major_version != 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor version: " + "%d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + return -1; + } + + /* + * Take lock here, as name lookup/block alloc/name add need to + * be atomic. + */ + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_lock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + + /* Get pointer to first available named block descriptor */ + named_block_desc_ptr = + cvmx_bootmem_phy_named_block_find(NULL, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING); + + /* + * Check to see if name already in use, return error if name + * not available or no more room for blocks. + */ + if (cvmx_bootmem_phy_named_block_find(name, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING) || !named_block_desc_ptr) { + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_unlock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + return -1; + } + + + /* + * Round size up to mult of minimum alignment bytes We need + * the actual size allocated to allow for blocks to be + * coalesced when they are freed. The alloc routine does the + * same rounding up on all allocations. + */ + size = ALIGN(size, CVMX_BOOTMEM_ALIGNMENT_SIZE); + + addr_allocated = cvmx_bootmem_phy_alloc(size, min_addr, max_addr, + alignment, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING); + if (addr_allocated >= 0) { + named_block_desc_ptr->base_addr = addr_allocated; + named_block_desc_ptr->size = size; + strncpy(named_block_desc_ptr->name, name, + cvmx_bootmem_desc->named_block_name_len); + named_block_desc_ptr->name[cvmx_bootmem_desc->named_block_name_len - 1] = 0; + } + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_unlock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + return addr_allocated; +} + +struct cvmx_bootmem_desc *cvmx_bootmem_get_desc(void) +{ + return cvmx_bootmem_desc; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c new file mode 100644 index 000000000..3839feba6 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c @@ -0,0 +1,307 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Support functions for managing command queues used for + * various hardware blocks. + */ + +#include <linux/kernel.h> + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> +#include <asm/octeon/cvmx-fpa.h> +#include <asm/octeon/cvmx-cmd-queue.h> + +#include <asm/octeon/cvmx-npei-defs.h> +#include <asm/octeon/cvmx-pexp-defs.h> +#include <asm/octeon/cvmx-pko-defs.h> + +/** + * This application uses this pointer to access the global queue + * state. It points to a bootmem named block. + */ +__cvmx_cmd_queue_all_state_t *__cvmx_cmd_queue_state_ptr; +EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr); + +/** + * Initialize the Global queue state pointer. + * + * Returns CVMX_CMD_QUEUE_SUCCESS or a failure code + */ +static cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(void) +{ + char *alloc_name = "cvmx_cmd_queues"; +#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 + extern uint64_t octeon_reserve32_memory; +#endif + + if (likely(__cvmx_cmd_queue_state_ptr)) + return CVMX_CMD_QUEUE_SUCCESS; + +#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 + if (octeon_reserve32_memory) + __cvmx_cmd_queue_state_ptr = + cvmx_bootmem_alloc_named_range(sizeof(*__cvmx_cmd_queue_state_ptr), + octeon_reserve32_memory, + octeon_reserve32_memory + + (CONFIG_CAVIUM_RESERVE32 << + 20) - 1, 128, alloc_name); + else +#endif + __cvmx_cmd_queue_state_ptr = + cvmx_bootmem_alloc_named(sizeof(*__cvmx_cmd_queue_state_ptr), + 128, + alloc_name); + if (__cvmx_cmd_queue_state_ptr) + memset(__cvmx_cmd_queue_state_ptr, 0, + sizeof(*__cvmx_cmd_queue_state_ptr)); + else { + struct cvmx_bootmem_named_block_desc *block_desc = + cvmx_bootmem_find_named_block(alloc_name); + if (block_desc) + __cvmx_cmd_queue_state_ptr = + cvmx_phys_to_ptr(block_desc->base_addr); + else { + cvmx_dprintf + ("ERROR: cvmx_cmd_queue_initialize: Unable to get named block %s.\n", + alloc_name); + return CVMX_CMD_QUEUE_NO_MEMORY; + } + } + return CVMX_CMD_QUEUE_SUCCESS; +} + +/** + * Initialize a command queue for use. The initial FPA buffer is + * allocated and the hardware unit is configured to point to the + * new command queue. + * + * @queue_id: Hardware command queue to initialize. + * @max_depth: Maximum outstanding commands that can be queued. + * @fpa_pool: FPA pool the command queues should come from. + * @pool_size: Size of each buffer in the FPA pool (bytes) + * + * Returns CVMX_CMD_QUEUE_SUCCESS or a failure code + */ +cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id, + int max_depth, int fpa_pool, + int pool_size) +{ + __cvmx_cmd_queue_state_t *qstate; + cvmx_cmd_queue_result_t result = __cvmx_cmd_queue_init_state_ptr(); + if (result != CVMX_CMD_QUEUE_SUCCESS) + return result; + + qstate = __cvmx_cmd_queue_get_state(queue_id); + if (qstate == NULL) + return CVMX_CMD_QUEUE_INVALID_PARAM; + + /* + * We artificially limit max_depth to 1<<20 words. It is an + * arbitrary limit. + */ + if (CVMX_CMD_QUEUE_ENABLE_MAX_DEPTH) { + if ((max_depth < 0) || (max_depth > 1 << 20)) + return CVMX_CMD_QUEUE_INVALID_PARAM; + } else if (max_depth != 0) + return CVMX_CMD_QUEUE_INVALID_PARAM; + + if ((fpa_pool < 0) || (fpa_pool > 7)) + return CVMX_CMD_QUEUE_INVALID_PARAM; + if ((pool_size < 128) || (pool_size > 65536)) + return CVMX_CMD_QUEUE_INVALID_PARAM; + + /* See if someone else has already initialized the queue */ + if (qstate->base_ptr_div128) { + if (max_depth != (int)qstate->max_depth) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Queue already initialized with different " + "max_depth (%d).\n", + (int)qstate->max_depth); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + if (fpa_pool != qstate->fpa_pool) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Queue already initialized with different " + "FPA pool (%u).\n", + qstate->fpa_pool); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + if ((pool_size >> 3) - 1 != qstate->pool_size_m1) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Queue already initialized with different " + "FPA pool size (%u).\n", + (qstate->pool_size_m1 + 1) << 3); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + CVMX_SYNCWS; + return CVMX_CMD_QUEUE_ALREADY_SETUP; + } else { + union cvmx_fpa_ctl_status status; + void *buffer; + + status.u64 = cvmx_read_csr(CVMX_FPA_CTL_STATUS); + if (!status.s.enb) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "FPA is not enabled.\n"); + return CVMX_CMD_QUEUE_NO_MEMORY; + } + buffer = cvmx_fpa_alloc(fpa_pool); + if (buffer == NULL) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Unable to allocate initial buffer.\n"); + return CVMX_CMD_QUEUE_NO_MEMORY; + } + + memset(qstate, 0, sizeof(*qstate)); + qstate->max_depth = max_depth; + qstate->fpa_pool = fpa_pool; + qstate->pool_size_m1 = (pool_size >> 3) - 1; + qstate->base_ptr_div128 = cvmx_ptr_to_phys(buffer) / 128; + /* + * We zeroed the now serving field so we need to also + * zero the ticket. + */ + __cvmx_cmd_queue_state_ptr-> + ticket[__cvmx_cmd_queue_get_index(queue_id)] = 0; + CVMX_SYNCWS; + return CVMX_CMD_QUEUE_SUCCESS; + } +} + +/** + * Shutdown a queue a free it's command buffers to the FPA. The + * hardware connected to the queue must be stopped before this + * function is called. + * + * @queue_id: Queue to shutdown + * + * Returns CVMX_CMD_QUEUE_SUCCESS or a failure code + */ +cvmx_cmd_queue_result_t cvmx_cmd_queue_shutdown(cvmx_cmd_queue_id_t queue_id) +{ + __cvmx_cmd_queue_state_t *qptr = __cvmx_cmd_queue_get_state(queue_id); + if (qptr == NULL) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_shutdown: Unable to " + "get queue information.\n"); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + + if (cvmx_cmd_queue_length(queue_id) > 0) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_shutdown: Queue still " + "has data in it.\n"); + return CVMX_CMD_QUEUE_FULL; + } + + __cvmx_cmd_queue_lock(queue_id, qptr); + if (qptr->base_ptr_div128) { + cvmx_fpa_free(cvmx_phys_to_ptr + ((uint64_t) qptr->base_ptr_div128 << 7), + qptr->fpa_pool, 0); + qptr->base_ptr_div128 = 0; + } + __cvmx_cmd_queue_unlock(qptr); + + return CVMX_CMD_QUEUE_SUCCESS; +} + +/** + * Return the number of command words pending in the queue. This + * function may be relatively slow for some hardware units. + * + * @queue_id: Hardware command queue to query + * + * Returns Number of outstanding commands + */ +int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id) +{ + if (CVMX_ENABLE_PARAMETER_CHECKING) { + if (__cvmx_cmd_queue_get_state(queue_id) == NULL) + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + + /* + * The cast is here so gcc with check that all values in the + * cvmx_cmd_queue_id_t enumeration are here. + */ + switch ((cvmx_cmd_queue_id_t) (queue_id & 0xff0000)) { + case CVMX_CMD_QUEUE_PKO_BASE: + /* + * FIXME: Need atomic lock on + * CVMX_PKO_REG_READ_IDX. Right now we are normally + * called with the queue lock, so that is a SLIGHT + * amount of protection. + */ + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue_id & 0xffff); + if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + union cvmx_pko_mem_debug9 debug9; + debug9.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG9); + return debug9.cn38xx.doorbell; + } else { + union cvmx_pko_mem_debug8 debug8; + debug8.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG8); + return debug8.cn50xx.doorbell; + } + case CVMX_CMD_QUEUE_ZIP: + case CVMX_CMD_QUEUE_DFA: + case CVMX_CMD_QUEUE_RAID: + /* FIXME: Implement other lengths */ + return 0; + case CVMX_CMD_QUEUE_DMA_BASE: + { + union cvmx_npei_dmax_counts dmax_counts; + dmax_counts.u64 = + cvmx_read_csr(CVMX_PEXP_NPEI_DMAX_COUNTS + (queue_id & 0x7)); + return dmax_counts.s.dbell; + } + case CVMX_CMD_QUEUE_END: + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + return CVMX_CMD_QUEUE_INVALID_PARAM; +} + +/** + * Return the command buffer to be written to. The purpose of this + * function is to allow CVMX routine access t othe low level buffer + * for initial hardware setup. User applications should not call this + * function directly. + * + * @queue_id: Command queue to query + * + * Returns Command buffer or NULL on failure + */ +void *cvmx_cmd_queue_buffer(cvmx_cmd_queue_id_t queue_id) +{ + __cvmx_cmd_queue_state_t *qptr = __cvmx_cmd_queue_get_state(queue_id); + if (qptr && qptr->base_ptr_div128) + return cvmx_phys_to_ptr((uint64_t) qptr->base_ptr_div128 << 7); + else + return NULL; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c new file mode 100644 index 000000000..ab8362e04 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -0,0 +1,424 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Helper functions to abstract board specific data about + * network ports from the rest of the cvmx-helper files. + */ + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-bootinfo.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-util.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> + +/** + * Return the MII PHY address associated with the given IPD + * port. A result of -1 means there isn't a MII capable PHY + * connected to this port. On chips supporting multiple MII + * busses the bus number is encoded in bits <15:8>. + * + * This function must be modified for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It replies on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @ipd_port: Octeon IPD port to get the MII address for. + * + * Returns MII PHY address and bus number or -1. + */ +int cvmx_helper_board_get_mii_address(int ipd_port) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_SIM: + /* Simulator doesn't have MII */ + return -1; + case CVMX_BOARD_TYPE_EBT3000: + case CVMX_BOARD_TYPE_EBT5800: + case CVMX_BOARD_TYPE_THUNDER: + case CVMX_BOARD_TYPE_NICPRO2: + /* Interface 0 is SPI4, interface 1 is RGMII */ + if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16; + else + return -1; + case CVMX_BOARD_TYPE_KODAMA: + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_HIKARI: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* + * Port 0 is WAN connected to a PHY, Port 1 is GMII + * connected to a switch + */ + if (ipd_port == 0) + return 4; + else if (ipd_port == 1) + return 9; + else + return -1; + case CVMX_BOARD_TYPE_NAC38: + /* Board has 8 RGMII ports PHYs are 0-7 */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port; + else if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16 + 4; + else + return -1; + case CVMX_BOARD_TYPE_EBH3000: + /* Board has dual SPI4 and no PHYs */ + return -1; + case CVMX_BOARD_TYPE_EBH5200: + case CVMX_BOARD_TYPE_EBH5201: + case CVMX_BOARD_TYPE_EBT5200: + /* Board has 2 management ports */ + if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && + (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2))) + return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT; + /* + * Board has 4 SGMII ports. The PHYs start right after the MII + * ports MII0 = 0, MII1 = 1, SGMII = 2-5. + */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port + 2; + else + return -1; + case CVMX_BOARD_TYPE_EBH5600: + case CVMX_BOARD_TYPE_EBH5601: + case CVMX_BOARD_TYPE_EBH5610: + /* Board has 1 management port */ + if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT) + return 0; + /* + * Board has 8 SGMII ports. 4 connect out, two connect + * to a switch, and 2 loop to each other + */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port + 1; + else + return -1; + case CVMX_BOARD_TYPE_CUST_NB5: + if (ipd_port == 2) + return 4; + else + return -1; + case CVMX_BOARD_TYPE_NIC_XLE_4G: + /* Board has 4 SGMII ports. connected QLM3(interface 1) */ + if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16 + 1; + else + return -1; + case CVMX_BOARD_TYPE_NIC_XLE_10G: + case CVMX_BOARD_TYPE_NIC10E: + return -1; + case CVMX_BOARD_TYPE_NIC4E: + if (ipd_port >= 0 && ipd_port <= 3) + return (ipd_port + 0x1f) & 0x1f; + else + return -1; + case CVMX_BOARD_TYPE_NIC2E: + if (ipd_port >= 0 && ipd_port <= 1) + return ipd_port + 1; + else + return -1; + case CVMX_BOARD_TYPE_BBGW_REF: + /* + * No PHYs are connected to Octeon, everything is + * through switch. + */ + return -1; + + case CVMX_BOARD_TYPE_CUST_WSX16: + if (ipd_port >= 0 && ipd_port <= 3) + return ipd_port; + else if (ipd_port >= 16 && ipd_port <= 19) + return ipd_port - 16 + 4; + else + return -1; + case CVMX_BOARD_TYPE_UBNT_E100: + if (ipd_port >= 0 && ipd_port <= 2) + return 7 - ipd_port; + else + return -1; + case CVMX_BOARD_TYPE_KONTRON_S1901: + if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT) + return 1; + else + return -1; + + } + + /* Some unknown board. Somebody forgot to update this function... */ + cvmx_dprintf + ("cvmx_helper_board_get_mii_address: Unknown board type %d\n", + cvmx_sysinfo_get()->board_type); + return -1; +} + +/** + * This function is the board specific method of determining an + * ethernet ports link speed. Most Octeon boards have Marvell PHYs + * and are handled by the fall through case. This function must be + * updated for boards that don't have the normal Marvell PHYs. + * + * This function must be modified for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It relies on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @ipd_port: IPD input port associated with the port we want to get link + * status for. + * + * Returns The ports link status. If the link isn't fully resolved, this must + * return zero. + */ +cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + + /* Unless we fix it later, all links are defaulted to down */ + result.u64 = 0; + + /* + * This switch statement should handle all ports that either don't use + * Marvell PHYS, or don't support in-band status. + */ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_SIM: + /* The simulator gives you a simulated 1Gbps full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 1) { + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + /* Fall through to the generic code below */ + break; + case CVMX_BOARD_TYPE_CUST_NB5: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 1) { + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + break; + case CVMX_BOARD_TYPE_BBGW_REF: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 2) { + /* Port 2 is not hooked up */ + result.u64 = 0; + return result; + } else { + /* Ports 0 and 1 connect to the switch */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + break; + } + + if (OCTEON_IS_MODEL(OCTEON_CN3XXX) + || OCTEON_IS_MODEL(OCTEON_CN58XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * We don't have a PHY address, so attempt to use + * in-band status. It is really important that boards + * not supporting in-band status never get + * here. Reading broken in-band status tends to do bad + * things + */ + union cvmx_gmxx_rxx_rx_inbnd inband_status; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + inband_status.u64 = + cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface)); + + result.s.link_up = inband_status.s.status; + result.s.full_duplex = inband_status.s.duplex; + switch (inband_status.s.speed) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.u64 = 0; + break; + } + } else { + /* + * We don't have a PHY address and we don't have + * in-band status. There is no way to determine the + * link speed. Return down assuming this port isn't + * wired + */ + result.u64 = 0; + } + + /* If link is down, return all fields as zero. */ + if (!result.s.link_up) + result.u64 = 0; + + return result; +} + +/** + * This function is called by cvmx_helper_interface_probe() after it + * determines the number of ports Octeon can support on a specific + * interface. This function is the per board location to override + * this value. It is called with the number of ports Octeon might + * support and should return the number of actual ports on the + * board. + * + * This function must be modifed for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It relys on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @interface: Interface to probe + * @supported_ports: + * Number of ports Octeon supports. + * + * Returns Number of ports the actual board supports. Many times this will + * simple be "support_ports". + */ +int __cvmx_helper_board_interface_probe(int interface, int supported_ports) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + if (interface == 0) + return 2; + break; + case CVMX_BOARD_TYPE_BBGW_REF: + if (interface == 0) + return 2; + break; + case CVMX_BOARD_TYPE_NIC_XLE_4G: + if (interface == 0) + return 0; + break; + /* The 2nd interface on the EBH5600 is connected to the Marvel switch, + which we don't support. Disable ports connected to it */ + case CVMX_BOARD_TYPE_EBH5600: + if (interface == 1) + return 0; + break; + } + return supported_ports; +} + +/** + * Enable packet input/output from the hardware. This function is + * called after by cvmx_helper_packet_hardware_enable() to + * perform board specific initialization. For most boards + * nothing is needed. + * + * @interface: Interface to enable + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_board_hardware_enable(int interface) +{ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) { + if (interface == 0) { + /* Different config for switch port */ + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); + /* + * Boards with gigabit WAN ports need a + * different setting that is compatible with + * 100 Mbit settings + */ + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), + 0xc); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), + 0xc); + } + } else if (cvmx_sysinfo_get()->board_type == + CVMX_BOARD_TYPE_UBNT_E100) { + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0); + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0); + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10); + } + return 0; +} + +/** + * Get the clock type used for the USB block based on board type. + * Used by the USB code for auto configuration of clock type. + * + * Return USB clock type enumeration + */ +enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_BBGW_REF: + case CVMX_BOARD_TYPE_LANAI2_A: + case CVMX_BOARD_TYPE_LANAI2_U: + case CVMX_BOARD_TYPE_LANAI2_G: + case CVMX_BOARD_TYPE_NIC10E_66: + case CVMX_BOARD_TYPE_UBNT_E100: + return USB_CLOCK_TYPE_CRYSTAL_12; + case CVMX_BOARD_TYPE_NIC10E: + return USB_CLOCK_TYPE_REF_12; + default: + break; + } + /* Most boards except NIC10e use a 12MHz crystal */ + if (OCTEON_IS_OCTEON2()) + return USB_CLOCK_TYPE_CRYSTAL_12; + return USB_CLOCK_TYPE_REF_48; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c new file mode 100644 index 000000000..4b26fedec --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c @@ -0,0 +1,73 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Fixes and workaround for Octeon chip errata. This file + * contains functions called by cvmx-helper to workaround known + * chip errata. For the most part, code doesn't need to call + * these functions directly. + * + */ +#include <linux/export.h> + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-helper-jtag.h> + +/** + * Due to errata G-720, the 2nd order CDR circuit on CN52XX pass + * 1 doesn't work properly. The following code disables 2nd order + * CDR for the specified QLM. + * + * @qlm: QLM to disable 2nd order CDR for. + */ +void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm) +{ + int lane; + cvmx_helper_qlm_jtag_init(); + /* We need to load all four lanes of the QLM, a total of 1072 bits */ + for (lane = 0; lane < 4; lane++) { + /* + * Each lane has 268 bits. We need to set + * cfg_cdr_incx<67:64> = 3 and cfg_cdr_secord<77> = + * 1. All other bits are zero. Bits go in LSB first, + * so start off with the zeros for bits <63:0>. + */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 63 - 0 + 1); + /* cfg_cdr_incx<67:64>=3 */ + cvmx_helper_qlm_jtag_shift(qlm, 67 - 64 + 1, 3); + /* Zeros for bits <76:68> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 76 - 68 + 1); + /* cfg_cdr_secord<77>=1 */ + cvmx_helper_qlm_jtag_shift(qlm, 77 - 77 + 1, 1); + /* Zeros for bits <267:78> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 267 - 78 + 1); + } + cvmx_helper_qlm_jtag_update(qlm); +} +EXPORT_SYMBOL(__cvmx_helper_errata_qlm_disable_2nd_order_cdr); diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c new file mode 100644 index 000000000..607b4e659 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c @@ -0,0 +1,144 @@ + +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Helper utilities for qlm_jtag. + * + */ + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-helper-jtag.h> + + +/** + * Initialize the internal QLM JTAG logic to allow programming + * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions. + * These functions should only be used at the direction of Cavium + * Networks. Programming incorrect values into the JTAG chain + * can cause chip damage. + */ +void cvmx_helper_qlm_jtag_init(void) +{ + union cvmx_ciu_qlm_jtgc jtgc; + uint32_t clock_div = 0; + uint32_t divisor = cvmx_sysinfo_get()->cpu_clock_hz / (25 * 1000000); + divisor = (divisor - 1) >> 2; + /* Convert the divisor into a power of 2 shift */ + while (divisor) { + clock_div++; + divisor = divisor >> 1; + } + + /* + * Clock divider for QLM JTAG operations. eclk is divided by + * 2^(CLK_DIV + 2) + */ + jtgc.u64 = 0; + jtgc.s.clk_div = clock_div; + jtgc.s.mux_sel = 0; + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + jtgc.s.bypass = 0x3; + else + jtgc.s.bypass = 0xf; + cvmx_write_csr(CVMX_CIU_QLM_JTGC, jtgc.u64); + cvmx_read_csr(CVMX_CIU_QLM_JTGC); +} + +/** + * Write up to 32bits into the QLM jtag chain. Bits are shifted + * into the MSB and out the LSB, so you should shift in the low + * order bits followed by the high order bits. The JTAG chain is + * 4 * 268 bits long, or 1072. + * + * @qlm: QLM to shift value into + * @bits: Number of bits to shift in (1-32). + * @data: Data to shift in. Bit 0 enters the chain first, followed by + * bit 1, etc. + * + * Returns The low order bits of the JTAG chain that shifted out of the + * circle. + */ +uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) +{ + union cvmx_ciu_qlm_jtgd jtgd; + jtgd.u64 = 0; + jtgd.s.shift = 1; + jtgd.s.shft_cnt = bits - 1; + jtgd.s.shft_reg = data; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.shift); + return jtgd.s.shft_reg >> (32 - bits); +} + +/** + * Shift long sequences of zeros into the QLM JTAG chain. It is + * common to need to shift more than 32 bits of zeros into the + * chain. This function is a convience wrapper around + * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of + * zeros at a time. + * + * @qlm: QLM to shift zeros into + * @bits: + */ +void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits) +{ + while (bits > 0) { + int n = bits; + if (n > 32) + n = 32; + cvmx_helper_qlm_jtag_shift(qlm, n, 0); + bits -= n; + } +} + +/** + * Program the QLM JTAG chain into all lanes of the QLM. You must + * have already shifted in 268*4, or 1072 bits into the JTAG + * chain. Updating invalid values can possibly cause chip damage. + * + * @qlm: QLM to program + */ +void cvmx_helper_qlm_jtag_update(int qlm) +{ + union cvmx_ciu_qlm_jtgd jtgd; + + /* Update the new data */ + jtgd.u64 = 0; + jtgd.s.update = 1; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.update); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-loop.c b/arch/mips/cavium-octeon/executive/cvmx-helper-loop.c new file mode 100644 index 000000000..bfbd46115 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-loop.c @@ -0,0 +1,85 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for LOOP initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-pip-defs.h> + +/** + * Probe a LOOP interface and determine the number of ports + * connected to it. The LOOP interface should still be down + * after this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_loop_probe(int interface) +{ + union cvmx_ipd_sub_port_fcs ipd_sub_port_fcs; + int num_ports = 4; + int port; + + /* We need to disable length checking so packet < 64 bytes and jumbo + frames don't get errors */ + for (port = 0; port < num_ports; port++) { + union cvmx_pip_prt_cfgx port_cfg; + int ipd_port = cvmx_helper_get_ipd_port(interface, port); + port_cfg.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + port_cfg.s.maxerr_en = 0; + port_cfg.s.minerr_en = 0; + cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_cfg.u64); + } + + /* Disable FCS stripping for loopback ports */ + ipd_sub_port_fcs.u64 = cvmx_read_csr(CVMX_IPD_SUB_PORT_FCS); + ipd_sub_port_fcs.s.port_bit2 = 0; + cvmx_write_csr(CVMX_IPD_SUB_PORT_FCS, ipd_sub_port_fcs.u64); + return num_ports; +} + +/** + * Bringup and enable a LOOP interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_loop_enable(int interface) +{ + /* Do nothing. */ + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c new file mode 100644 index 000000000..cc94cfa54 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c @@ -0,0 +1,113 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for NPI initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> + +#include <asm/octeon/cvmx-pip-defs.h> + +/** + * Probe a NPI interface and determine the number of ports + * connected to it. The NPI interface should still be down + * after this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_npi_probe(int interface) +{ +#if CVMX_PKO_QUEUES_PER_PORT_PCI > 0 + if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)) + return 4; + else if (OCTEON_IS_MODEL(OCTEON_CN56XX) + && !OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + /* The packet engines didn't exist before pass 2 */ + return 4; + else if (OCTEON_IS_MODEL(OCTEON_CN52XX) + && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) + /* The packet engines didn't exist before pass 2 */ + return 4; +#if 0 + /* + * Technically CN30XX, CN31XX, and CN50XX contain packet + * engines, but nobody ever uses them. Since this is the case, + * we disable them here. + */ + else if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) + return 2; + else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) + return 1; +#endif +#endif + return 0; +} + +/** + * Bringup and enable a NPI interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_npi_enable(int interface) +{ + /* + * On CN50XX, CN52XX, and CN56XX we need to disable length + * checking so packet < 64 bytes and jumbo frames don't get + * errors. + */ + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) && + !OCTEON_IS_MODEL(OCTEON_CN58XX)) { + int num_ports = cvmx_helper_ports_on_interface(interface); + int port; + for (port = 0; port < num_ports; port++) { + union cvmx_pip_prt_cfgx port_cfg; + int ipd_port = + cvmx_helper_get_ipd_port(interface, port); + port_cfg.u64 = + cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + port_cfg.s.maxerr_en = 0; + port_cfg.s.minerr_en = 0; + cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), + port_cfg.u64); + } + } + + /* Enables are controlled by the remote host, so nothing to do here */ + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c new file mode 100644 index 000000000..b8898e2b8 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c @@ -0,0 +1,519 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for RGMII/GMII/MII initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> +#include <asm/octeon/cvmx-dbg-defs.h> + +/** + * Probe RGMII ports and determine the number present + * + * @interface: Interface to probe + * + * Returns Number of RGMII/GMII/MII ports (0-4). + */ +int __cvmx_helper_rgmii_probe(int interface) +{ + int num_ports = 0; + union cvmx_gmxx_inf_mode mode; + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (mode.s.type) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + cvmx_dprintf("ERROR: RGMII initialize called in " + "SPI interface\n"); + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * On these chips "type" says we're in + * GMII/MII mode. This limits us to 2 ports + */ + num_ports = 2; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); + } + } else { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + num_ports = 4; + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + num_ports = 3; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); + } + } + return num_ports; +} + +/** + * Put an RGMII interface in loopback mode. Internal packets sent + * out will be received back again on the same port. Externally + * received packets will echo back out. + * + * @port: IPD port number to loop. + */ +void cvmx_helper_rgmii_internal_loopback(int port) +{ + int interface = (port >> 4) & 1; + int index = port & 0xf; + uint64_t tmp; + + union cvmx_gmxx_prtx_cfg gmx_cfg; + gmx_cfg.u64 = 0; + gmx_cfg.s.duplex = 1; + gmx_cfg.s.slottime = 1; + gmx_cfg.s.speed = 1; + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + tmp = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); +} + +/** + * Workaround ASX setup errata with CN38XX pass1 + * + * @interface: Interface to setup + * @port: Port to setup (0..3) + * @cpu_clock_hz: + * Chip frequency in Hertz + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_errata_asx_pass1(int interface, int port, + int cpu_clock_hz) +{ + /* Set hi water mark as per errata GMX-4 */ + if (cpu_clock_hz >= 325000000 && cpu_clock_hz < 375000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 12); + else if (cpu_clock_hz >= 375000000 && cpu_clock_hz < 437000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 11); + else if (cpu_clock_hz >= 437000000 && cpu_clock_hz < 550000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 10); + else if (cpu_clock_hz >= 550000000 && cpu_clock_hz < 687000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 9); + else + cvmx_dprintf("Illegal clock frequency (%d). " + "CVMX_ASXX_TX_HI_WATERX not set\n", cpu_clock_hz); + return 0; +} + +/** + * Configure all of the ASX, GMX, and PKO registers required + * to get RGMII to function on the supplied interface. + * + * @interface: PKO Interface to configure (0 or 1) + * + * Returns Zero on success + */ +int __cvmx_helper_rgmii_enable(int interface) +{ + int num_ports = cvmx_helper_ports_on_interface(interface); + int port; + struct cvmx_sysinfo *sys_info_ptr = cvmx_sysinfo_get(); + union cvmx_gmxx_inf_mode mode; + union cvmx_asxx_tx_prt_en asx_tx; + union cvmx_asxx_rx_prt_en asx_rx; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (mode.s.en == 0) + return -1; + if ((OCTEON_IS_MODEL(OCTEON_CN38XX) || + OCTEON_IS_MODEL(OCTEON_CN58XX)) && mode.s.type == 1) + /* Ignore SPI interfaces */ + return -1; + + /* Configure the ASX registers needed to use the RGMII ports */ + asx_tx.u64 = 0; + asx_tx.s.prt_en = cvmx_build_mask(num_ports); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64); + + asx_rx.u64 = 0; + asx_rx.s.prt_en = cvmx_build_mask(num_ports); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64); + + /* Configure the GMX registers needed to use the RGMII ports */ + for (port = 0; port < num_ports; port++) { + /* Setting of CVMX_GMXX_TXX_THRESH has been moved to + __cvmx_helper_setup_gmx() */ + + if (cvmx_octeon_is_pass1()) + __cvmx_helper_errata_asx_pass1(interface, port, + sys_info_ptr-> + cpu_clock_hz); + else { + /* + * Configure more flexible RGMII preamble + * checking. Pass 1 doesn't support this + * feature. + */ + union cvmx_gmxx_rxx_frm_ctl frm_ctl; + frm_ctl.u64 = + cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL + (port, interface)); + /* New field, so must be compile time */ + frm_ctl.s.pre_free = 1; + cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface), + frm_ctl.u64); + } + + /* + * Each pause frame transmitted will ask for about 10M + * bit times before resume. If buffer space comes + * available before that time has expired, an XON + * pause frame (0 time) will be transmitted to restart + * the flow. + */ + cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface), + 20000); + cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL + (port, interface), 19000); + + if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), + 16); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), + 16); + } else { + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), + 24); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), + 24); + } + } + + __cvmx_helper_setup_gmx(interface, num_ports); + + /* enable the ports now */ + for (port = 0; port < num_ports; port++) { + union cvmx_gmxx_prtx_cfg gmx_cfg; + + gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface)); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(port, interface), + gmx_cfg.u64); + } + __cvmx_interrupt_asxx_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_asxx_prt_loop asxx_prt_loop; + + asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + if (asxx_prt_loop.s.int_loop & (1 << index)) { + /* Force 1Gbps full duplex on internal loopback */ + cvmx_helper_link_info_t result; + result.u64 = 0; + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + return result; + } else + return __cvmx_helper_board_link_get(ipd_port); +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_rgmii_link_set(int ipd_port, + cvmx_helper_link_info_t link_info) +{ + int result = 0; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_gmxx_prtx_cfg original_gmx_cfg; + union cvmx_gmxx_prtx_cfg new_gmx_cfg; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos_save[16]; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp_save; + int i; + + /* Ignore speed sets in the simulator */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) + return 0; + + /* Read the current settings so we know the current enable state */ + original_gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + new_gmx_cfg = original_gmx_cfg; + + /* Disable the lowest level RX */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) & + ~(1 << index)); + + memset(pko_mem_queue_qos_save, 0, sizeof(pko_mem_queue_qos_save)); + /* Disable all queues so that TX should become idle */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); + pko_mem_queue_qos.u64 = cvmx_read_csr(CVMX_PKO_MEM_QUEUE_QOS); + pko_mem_queue_qos.s.pid = ipd_port; + pko_mem_queue_qos.s.qid = queue; + pko_mem_queue_qos_save[i] = pko_mem_queue_qos; + pko_mem_queue_qos.s.qos_mask = 0; + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos.u64); + } + + /* Disable backpressure */ + gmx_tx_ovr_bp.u64 = cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); + gmx_tx_ovr_bp_save = gmx_tx_ovr_bp; + gmx_tx_ovr_bp.s.bp &= ~(1 << index); + gmx_tx_ovr_bp.s.en |= 1 << index; + cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp.u64); + cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); + + /* + * Poll the GMX state machine waiting for it to become + * idle. Preferably we should only change speed when it is + * idle. If it doesn't become idle we will still do the speed + * change, but there is a slight chance that GMX will + * lockup. + */ + cvmx_write_csr(CVMX_NPI_DBG_SELECT, + interface * 0x800 + index * 0x100 + 0x880); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 7, + ==, 0, 10000); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 0xf, + ==, 0, 10000); + + /* Disable the port before we make any changes */ + new_gmx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Set full/half duplex */ + if (cvmx_octeon_is_pass1()) + /* Half duplex is broken for 38XX Pass 1 */ + new_gmx_cfg.s.duplex = 1; + else if (!link_info.s.link_up) + /* Force full duplex on down links */ + new_gmx_cfg.s.duplex = 1; + else + new_gmx_cfg.s.duplex = link_info.s.full_duplex; + + /* Set the link speed. Anything unknown is set to 1Gbps */ + if (link_info.s.speed == 10) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else if (link_info.s.speed == 100) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else { + new_gmx_cfg.s.slottime = 1; + new_gmx_cfg.s.speed = 1; + } + + /* Adjust the clocks */ + if (link_info.s.speed == 10) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 50); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else if (link_info.s.speed == 100) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 5); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + } + + if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + if ((link_info.s.speed == 10) || (link_info.s.speed == 100)) { + union cvmx_gmxx_inf_mode mode; + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + /* + * Port .en .type .p0mii Configuration + * ---- --- ----- ------ ----------------------------------------- + * X 0 X X All links are disabled. + * 0 1 X 0 Port 0 is RGMII + * 0 1 X 1 Port 0 is MII + * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. + * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or + * MII port is selected by GMX_PRT1_CFG[SPEED]. + */ + + /* In MII mode, CLK_CNT = 1. */ + if (((index == 0) && (mode.s.p0mii == 1)) + || ((index != 0) && (mode.s.type == 1))) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK + (index, interface), 1); + } + } + } + + /* Do a read to make sure all setup stuff is complete */ + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Save the new GMX setting without enabling the port */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + /* Enable the lowest level RX */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) | (1 << + index)); + + /* Re-enable the TX path */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, + pko_mem_queue_qos_save[i].u64); + } + + /* Restore backpressure */ + cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp_save.u64); + + /* Restore the GMX enable state. Port config is complete */ + new_gmx_cfg.s.en = original_gmx_cfg.s.en; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + return result; +} + +/** + * Configure a port for internal and/or external loopback. Internal loopback + * causes packets sent by the port to be received by Octeon. External loopback + * causes packets received from the wire to sent out again. + * + * @ipd_port: IPD/PKO port to loopback. + * @enable_internal: + * Non zero if you want internal loopback + * @enable_external: + * Non zero if you want external loopback + * + * Returns Zero on success, negative on failure. + */ +int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal, + int enable_external) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + int original_enable; + union cvmx_gmxx_prtx_cfg gmx_cfg; + union cvmx_asxx_prt_loop asxx_prt_loop; + + /* Read the current enable state and save it */ + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + original_enable = gmx_cfg.s.en; + /* Force port to be disabled */ + gmx_cfg.s.en = 0; + if (enable_internal) { + /* Force speed if we're doing internal loopback */ + gmx_cfg.s.duplex = 1; + gmx_cfg.s.slottime = 1; + gmx_cfg.s.speed = 1; + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + } + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + + /* Set the loopback bits */ + asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + if (enable_internal) + asxx_prt_loop.s.int_loop |= 1 << index; + else + asxx_prt_loop.s.int_loop &= ~(1 << index); + if (enable_external) + asxx_prt_loop.s.ext_loop |= 1 << index; + else + asxx_prt_loop.s.ext_loop &= ~(1 << index); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), asxx_prt_loop.u64); + + /* Force enables in internal loopback */ + if (enable_internal) { + uint64_t tmp; + tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), + (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + (1 << index) | tmp); + original_enable = 1; + } + + /* Restore the enable state */ + gmx_cfg.s.en = original_enable; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c new file mode 100644 index 000000000..a176358c5 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c @@ -0,0 +1,553 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for SGMII initialization, configuration, + * and monitoring. + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-pcsx-defs.h> +#include <asm/octeon/cvmx-pcsxx-defs.h> + +/** + * Perform initialization required only once for an SGMII port. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_one_time(int interface, int index) +{ + const uint64_t clock_mhz = cvmx_sysinfo_get()->cpu_clock_hz / 1000000; + union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg; + union cvmx_pcsx_linkx_timer_count_reg pcsx_linkx_timer_count_reg; + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + + /* Disable GMX */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + gmxx_prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* + * Write PCS*_LINK*_TIMER_COUNT_REG[COUNT] with the + * appropriate value. 1000BASE-X specifies a 10ms + * interval. SGMII specifies a 1.6ms interval. + */ + pcs_misc_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + pcsx_linkx_timer_count_reg.u64 = + cvmx_read_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface)); + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + pcsx_linkx_timer_count_reg.s.count = + (10000ull * clock_mhz) >> 10; + } else { + /* SGMII */ + pcsx_linkx_timer_count_reg.s.count = + (1600ull * clock_mhz) >> 10; + } + cvmx_write_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface), + pcsx_linkx_timer_count_reg.u64); + + /* + * Write the advertisement register to be used as the + * tx_Config_Reg<D15:D0> of the autonegotiation. In + * 1000BASE-X mode, tx_Config_Reg<D15:D0> is PCS*_AN*_ADV_REG. + * In SGMII PHY mode, tx_Config_Reg<D15:D0> is + * PCS*_SGM*_AN_ADV_REG. In SGMII MAC mode, + * tx_Config_Reg<D15:D0> is the fixed value 0x4001, so this + * step can be skipped. + */ + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + union cvmx_pcsx_anx_adv_reg pcsx_anx_adv_reg; + pcsx_anx_adv_reg.u64 = + cvmx_read_csr(CVMX_PCSX_ANX_ADV_REG(index, interface)); + pcsx_anx_adv_reg.s.rem_flt = 0; + pcsx_anx_adv_reg.s.pause = 3; + pcsx_anx_adv_reg.s.hfd = 1; + pcsx_anx_adv_reg.s.fd = 1; + cvmx_write_csr(CVMX_PCSX_ANX_ADV_REG(index, interface), + pcsx_anx_adv_reg.u64); + } else { + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcsx_miscx_ctl_reg.s.mac_phy) { + /* PHY Mode */ + union cvmx_pcsx_sgmx_an_adv_reg pcsx_sgmx_an_adv_reg; + pcsx_sgmx_an_adv_reg.u64 = + cvmx_read_csr(CVMX_PCSX_SGMX_AN_ADV_REG + (index, interface)); + pcsx_sgmx_an_adv_reg.s.link = 1; + pcsx_sgmx_an_adv_reg.s.dup = 1; + pcsx_sgmx_an_adv_reg.s.speed = 2; + cvmx_write_csr(CVMX_PCSX_SGMX_AN_ADV_REG + (index, interface), + pcsx_sgmx_an_adv_reg.u64); + } else { + /* MAC Mode - Nothing to do */ + } + } + return 0; +} + +/** + * Initialize the SERTES link for the first time or after a loss + * of link. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_link(int interface, int index) +{ + union cvmx_pcsx_mrx_control_reg control_reg; + + /* + * Take PCS through a reset sequence. + * PCS*_MR*_CONTROL_REG[PWR_DN] should be cleared to zero. + * Write PCS*_MR*_CONTROL_REG[RESET]=1 (while not changing the + * value of the other PCS*_MR*_CONTROL_REG bits). Read + * PCS*_MR*_CONTROL_REG[RESET] until it changes value to + * zero. + */ + control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) { + control_reg.s.reset = 1; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + control_reg.u64); + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSX_MRX_CONTROL_REG(index, interface), + union cvmx_pcsx_mrx_control_reg, reset, ==, 0, 10000)) { + cvmx_dprintf("SGMII%d: Timeout waiting for port %d " + "to finish reset\n", + interface, index); + return -1; + } + } + + /* + * Write PCS*_MR*_CONTROL_REG[RST_AN]=1 to ensure a fresh + * sgmii negotiation starts. + */ + control_reg.s.rst_an = 1; + control_reg.s.an_en = 1; + control_reg.s.pwr_dn = 0; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + control_reg.u64); + + /* + * Wait for PCS*_MR*_STATUS_REG[AN_CPT] to be set, indicating + * that sgmii autonegotiation is complete. In MAC mode this + * isn't an ethernet link, but a link between Octeon and the + * PHY. + */ + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + CVMX_WAIT_FOR_FIELD64(CVMX_PCSX_MRX_STATUS_REG(index, interface), + union cvmx_pcsx_mrx_status_reg, an_cpt, ==, 1, + 10000)) { + /* cvmx_dprintf("SGMII%d: Port %d link timeout\n", interface, index); */ + return -1; + } + return 0; +} + +/** + * Configure an SGMII link to the specified speed after the SERTES + * link is up. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * @link_info: Link state to configure + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_link_speed(int interface, + int index, + cvmx_helper_link_info_t + link_info) +{ + int is_enabled; + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + + /* Disable GMX before we make any changes. Remember the enable state */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + is_enabled = gmxx_prtx_cfg.s.en; + gmxx_prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* Wait for GMX to be idle */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_PRTX_CFG(index, interface), union cvmx_gmxx_prtx_cfg, + rx_idle, ==, 1, 10000) + || CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_PRTX_CFG(index, interface), + union cvmx_gmxx_prtx_cfg, tx_idle, ==, 1, + 10000)) { + cvmx_dprintf + ("SGMII%d: Timeout waiting for port %d to be idle\n", + interface, index); + return -1; + } + + /* Read GMX CFG again to make sure the disable completed */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* + * Get the misc control for PCS. We will need to set the + * duplication amount. + */ + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + + /* + * Use GMXENO to force the link down if the status we get says + * it should be down. + */ + pcsx_miscx_ctl_reg.s.gmxeno = !link_info.s.link_up; + + /* Only change the duplex setting if the link is up */ + if (link_info.s.link_up) + gmxx_prtx_cfg.s.duplex = link_info.s.full_duplex; + + /* Do speed based setting for GMX */ + switch (link_info.s.speed) { + case 10: + gmxx_prtx_cfg.s.speed = 0; + gmxx_prtx_cfg.s.speed_msb = 1; + gmxx_prtx_cfg.s.slottime = 0; + /* Setting from GMX-603 */ + pcsx_miscx_ctl_reg.s.samp_pt = 25; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + break; + case 100: + gmxx_prtx_cfg.s.speed = 0; + gmxx_prtx_cfg.s.speed_msb = 0; + gmxx_prtx_cfg.s.slottime = 0; + pcsx_miscx_ctl_reg.s.samp_pt = 0x5; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + break; + case 1000: + gmxx_prtx_cfg.s.speed = 1; + gmxx_prtx_cfg.s.speed_msb = 0; + gmxx_prtx_cfg.s.slottime = 1; + pcsx_miscx_ctl_reg.s.samp_pt = 1; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 512); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 8192); + break; + default: + break; + } + + /* Write the new misc control for PCS */ + cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface), + pcsx_miscx_ctl_reg.u64); + + /* Write the new GMX settings with the port still disabled */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* Read GMX CFG again to make sure the config completed */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Restore the enabled / disabled state */ + gmxx_prtx_cfg.s.en = is_enabled; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + return 0; +} + +/** + * Bring up the SGMII interface to be ready for packet I/O but + * leave I/O disabled using the GMX override. This function + * follows the bringup documented in 10.6.3 of the manual. + * + * @interface: Interface to bringup + * @num_ports: Number of ports on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports) +{ + int index; + + __cvmx_helper_setup_gmx(interface, num_ports); + + for (index = 0; index < num_ports; index++) { + int ipd_port = cvmx_helper_get_ipd_port(interface, index); + __cvmx_helper_sgmii_hardware_init_one_time(interface, index); + /* Linux kernel driver will call ....link_set with the + * proper link state. In the simulator there is no + * link state polling and hence it is set from + * here. + */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) + __cvmx_helper_sgmii_link_set(ipd_port, + __cvmx_helper_sgmii_link_get(ipd_port)); + } + + return 0; +} + +int __cvmx_helper_sgmii_enumerate(int interface) +{ + return 4; +} +/** + * Probe a SGMII interface and determine the number of ports + * connected to it. The SGMII interface should still be down after + * this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_sgmii_probe(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + /* + * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the + * interface needs to be enabled before IPD otherwise per port + * backpressure may not work properly + */ + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + mode.s.en = 1; + cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64); + return __cvmx_helper_sgmii_enumerate(interface); +} + +/** + * Bringup and enable a SGMII interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_sgmii_enable(int interface) +{ + int num_ports = cvmx_helper_ports_on_interface(interface); + int index; + + __cvmx_helper_sgmii_hardware_init(interface, num_ports); + + for (index = 0; index < num_ports; index++) { + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + gmxx_prtx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + gmxx_prtx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), + gmxx_prtx_cfg.u64); + __cvmx_interrupt_pcsx_intx_en_reg_enable(index, interface); + } + __cvmx_interrupt_pcsxx_int_en_reg_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg; + + result.u64 = 0; + + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) { + /* The simulator gives you a simulated 1Gbps full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + + pcsx_mrx_control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + if (pcsx_mrx_control_reg.s.loopbck1) { + /* Force 1Gbps full duplex link for internal loopback */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + + pcs_misc_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + /* FIXME */ + } else { + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcsx_miscx_ctl_reg.s.mac_phy) { + /* PHY Mode */ + union cvmx_pcsx_mrx_status_reg pcsx_mrx_status_reg; + union cvmx_pcsx_anx_results_reg pcsx_anx_results_reg; + + /* + * Don't bother continuing if the SERTES low + * level link is down + */ + pcsx_mrx_status_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_STATUS_REG + (index, interface)); + if (pcsx_mrx_status_reg.s.lnk_st == 0) { + if (__cvmx_helper_sgmii_hardware_init_link + (interface, index) != 0) + return result; + } + + /* Read the autoneg results */ + pcsx_anx_results_reg.u64 = + cvmx_read_csr(CVMX_PCSX_ANX_RESULTS_REG + (index, interface)); + if (pcsx_anx_results_reg.s.an_cpt) { + /* + * Auto negotiation is complete. Set + * status accordingly. + */ + result.s.full_duplex = + pcsx_anx_results_reg.s.dup; + result.s.link_up = + pcsx_anx_results_reg.s.link_ok; + switch (pcsx_anx_results_reg.s.spd) { + case 0: + result.s.speed = 10; + break; + case 1: + result.s.speed = 100; + break; + case 2: + result.s.speed = 1000; + break; + default: + result.s.speed = 0; + result.s.link_up = 0; + break; + } + } else { + /* + * Auto negotiation isn't + * complete. Return link down. + */ + result.s.speed = 0; + result.s.link_up = 0; + } + } else { /* MAC Mode */ + + result = __cvmx_helper_board_link_get(ipd_port); + } + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_sgmii_link_set(int ipd_port, + cvmx_helper_link_info_t link_info) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + __cvmx_helper_sgmii_hardware_init_link(interface, index); + return __cvmx_helper_sgmii_hardware_init_link_speed(interface, index, + link_info); +} + +/** + * Configure a port for internal and/or external loopback. Internal + * loopback causes packets sent by the port to be received by + * Octeon. External loopback causes packets received from the wire to + * sent out again. + * + * @ipd_port: IPD/PKO port to loopback. + * @enable_internal: + * Non zero if you want internal loopback + * @enable_external: + * Non zero if you want external loopback + * + * Returns Zero on success, negative on failure. + */ +int __cvmx_helper_sgmii_configure_loopback(int ipd_port, int enable_internal, + int enable_external) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg; + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + + pcsx_mrx_control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + pcsx_mrx_control_reg.s.loopbck1 = enable_internal; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + pcsx_mrx_control_reg.u64); + + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + pcsx_miscx_ctl_reg.s.loopbck2 = enable_external; + cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface), + pcsx_miscx_ctl_reg.u64); + + __cvmx_helper_sgmii_hardware_init_link(interface, index); + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c new file mode 100644 index 000000000..2a574d272 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c @@ -0,0 +1,202 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for SPI initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> +#include <asm/octeon/cvmx-spi.h> +#include <asm/octeon/cvmx-helper.h> + +#include <asm/octeon/cvmx-pip-defs.h> +#include <asm/octeon/cvmx-pko-defs.h> +#include <asm/octeon/cvmx-spxx-defs.h> +#include <asm/octeon/cvmx-stxx-defs.h> + +/* + * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI + * initialization routines wait for SPI training. You can override the + * value using executive-config.h if necessary. + */ +#ifndef CVMX_HELPER_SPI_TIMEOUT +#define CVMX_HELPER_SPI_TIMEOUT 10 +#endif + +int __cvmx_helper_spi_enumerate(int interface) +{ + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + cvmx_spi4000_is_present(interface)) { + return 10; + } else { + return 16; + } +} + +/** + * Probe a SPI interface and determine the number of ports + * connected to it. The SPI interface should still be down after + * this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_spi_probe(int interface) +{ + int num_ports = 0; + + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + cvmx_spi4000_is_present(interface)) { + num_ports = 10; + } else { + union cvmx_pko_reg_crc_enable enable; + num_ports = 16; + /* + * Unlike the SPI4000, most SPI devices don't + * automatically put on the L2 CRC. For everything + * except for the SPI4000 have PKO append the L2 CRC + * to the packet. + */ + enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE); + enable.s.enable |= 0xffff << (interface * 16); + cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64); + } + __cvmx_helper_setup_gmx(interface, num_ports); + return num_ports; +} + +/** + * Bringup and enable a SPI interface. After this call packet I/O + * should be fully functional. This is called with IPD enabled but + * PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_spi_enable(int interface) +{ + /* + * Normally the ethernet L2 CRC is checked and stripped in the + * GMX block. When you are using SPI, this isn' the case and + * IPD needs to check the L2 CRC. + */ + int num_ports = cvmx_helper_ports_on_interface(interface); + int ipd_port; + for (ipd_port = interface * 16; ipd_port < interface * 16 + num_ports; + ipd_port++) { + union cvmx_pip_prt_cfgx port_config; + port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + port_config.s.crc_en = 1; + cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64); + } + + if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) { + cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX, + CVMX_HELPER_SPI_TIMEOUT, num_ports); + if (cvmx_spi4000_is_present(interface)) + cvmx_spi4000_initialize(interface); + } + __cvmx_interrupt_spxx_int_msk_enable(interface); + __cvmx_interrupt_stxx_int_msk_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + result.u64 = 0; + + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) { + /* The simulator gives you a simulated full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } else if (cvmx_spi4000_is_present(interface)) { + union cvmx_gmxx_rxx_rx_inbnd inband = + cvmx_spi4000_check_speed(interface, index); + result.s.link_up = inband.s.status; + result.s.full_duplex = inband.s.duplex; + switch (inband.s.speed) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.s.speed = 0; + result.s.link_up = 0; + break; + } + } else { + /* For generic SPI we can't determine the link, just return some + sane results */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_spi_link_set(int ipd_port, cvmx_helper_link_info_t link_info) +{ + /* Nothing to do. If we have a SPI4000 then the setup was already performed + by cvmx_spi4000_check_speed(). If not then there isn't any link + info */ + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c new file mode 100644 index 000000000..b45b29757 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c @@ -0,0 +1,449 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Small helper utilities. + */ +#include <linux/kernel.h> + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-fpa.h> +#include <asm/octeon/cvmx-pip.h> +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-ipd.h> +#include <asm/octeon/cvmx-spi.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-util.h> + +#include <asm/octeon/cvmx-ipd-defs.h> + +/** + * Convert a interface mode into a human readable string + * + * @mode: Mode to convert + * + * Returns String + */ +const char *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t + mode) +{ + switch (mode) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + return "DISABLED"; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + return "RGMII"; + case CVMX_HELPER_INTERFACE_MODE_GMII: + return "GMII"; + case CVMX_HELPER_INTERFACE_MODE_SPI: + return "SPI"; + case CVMX_HELPER_INTERFACE_MODE_PCIE: + return "PCIE"; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + return "XAUI"; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + return "SGMII"; + case CVMX_HELPER_INTERFACE_MODE_PICMG: + return "PICMG"; + case CVMX_HELPER_INTERFACE_MODE_NPI: + return "NPI"; + case CVMX_HELPER_INTERFACE_MODE_LOOP: + return "LOOP"; + } + return "UNKNOWN"; +} + +/** + * Debug routine to dump the packet structure to the console + * + * @work: Work queue entry containing the packet to dump + * Returns + */ +int cvmx_helper_dump_packet(cvmx_wqe_t *work) +{ + uint64_t count; + uint64_t remaining_bytes; + union cvmx_buf_ptr buffer_ptr; + uint64_t start_of_buffer; + uint8_t *data_address; + uint8_t *end_of_data; + + cvmx_dprintf("Packet Length: %u\n", work->word1.len); + cvmx_dprintf(" Input Port: %u\n", cvmx_wqe_get_port(work)); + cvmx_dprintf(" QoS: %u\n", cvmx_wqe_get_qos(work)); + cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); + + if (work->word2.s.bufs == 0) { + union cvmx_ipd_wqe_fpa_queue wqe_pool; + wqe_pool.u64 = cvmx_read_csr(CVMX_IPD_WQE_FPA_QUEUE); + buffer_ptr.u64 = 0; + buffer_ptr.s.pool = wqe_pool.s.wqe_pool; + buffer_ptr.s.size = 128; + buffer_ptr.s.addr = cvmx_ptr_to_phys(work->packet_data); + if (likely(!work->word2.s.not_IP)) { + union cvmx_pip_ip_offset pip_ip_offset; + pip_ip_offset.u64 = cvmx_read_csr(CVMX_PIP_IP_OFFSET); + buffer_ptr.s.addr += + (pip_ip_offset.s.offset << 3) - + work->word2.s.ip_offset; + buffer_ptr.s.addr += (work->word2.s.is_v6 ^ 1) << 2; + } else { + /* + * WARNING: This code assumes that the packet + * is not RAW. If it was, we would use + * PIP_GBL_CFG[RAW_SHF] instead of + * PIP_GBL_CFG[NIP_SHF]. + */ + union cvmx_pip_gbl_cfg pip_gbl_cfg; + pip_gbl_cfg.u64 = cvmx_read_csr(CVMX_PIP_GBL_CFG); + buffer_ptr.s.addr += pip_gbl_cfg.s.nip_shf; + } + } else + buffer_ptr = work->packet_ptr; + remaining_bytes = work->word1.len; + + while (remaining_bytes) { + start_of_buffer = + ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7; + cvmx_dprintf(" Buffer Start:%llx\n", + (unsigned long long)start_of_buffer); + cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); + cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); + cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); + cvmx_dprintf(" Buffer Data: %llx\n", + (unsigned long long)buffer_ptr.s.addr); + cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); + + cvmx_dprintf("\t\t"); + data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr); + end_of_data = data_address + buffer_ptr.s.size; + count = 0; + while (data_address < end_of_data) { + if (remaining_bytes == 0) + break; + else + remaining_bytes--; + cvmx_dprintf("%02x", (unsigned int)*data_address); + data_address++; + if (remaining_bytes && (count == 7)) { + cvmx_dprintf("\n\t\t"); + count = 0; + } else + count++; + } + cvmx_dprintf("\n"); + + if (remaining_bytes) + buffer_ptr = *(union cvmx_buf_ptr *) + cvmx_phys_to_ptr(buffer_ptr.s.addr - 8); + } + return 0; +} + +/** + * Setup Random Early Drop on a specific input queue + * + * @queue: Input queue to setup RED on (0-7) + * @pass_thresh: + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. + * @drop_thresh: + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. + * Returns Zero on success. Negative on failure + */ +int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) +{ + union cvmx_ipd_qosx_red_marks red_marks; + union cvmx_ipd_red_quex_param red_param; + + /* Set RED to begin dropping packets when there are pass_thresh buffers + left. It will linearly drop more packets until reaching drop_thresh + buffers */ + red_marks.u64 = 0; + red_marks.s.drop = drop_thresh; + red_marks.s.pass = pass_thresh; + cvmx_write_csr(CVMX_IPD_QOSX_RED_MARKS(queue), red_marks.u64); + + /* Use the actual queue 0 counter, not the average */ + red_param.u64 = 0; + red_param.s.prb_con = + (255ul << 24) / (red_marks.s.pass - red_marks.s.drop); + red_param.s.avg_con = 1; + red_param.s.new_con = 255; + red_param.s.use_pcnt = 1; + cvmx_write_csr(CVMX_IPD_RED_QUEX_PARAM(queue), red_param.u64); + return 0; +} + +/** + * Setup Random Early Drop to automatically begin dropping packets. + * + * @pass_thresh: + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. + * @drop_thresh: + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. + * Returns Zero on success. Negative on failure + */ +int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) +{ + union cvmx_ipd_portx_bp_page_cnt page_cnt; + union cvmx_ipd_bp_prt_red_end ipd_bp_prt_red_end; + union cvmx_ipd_red_port_enable red_port_enable; + int queue; + int interface; + int port; + + /* Disable backpressure based on queued buffers. It needs SW support */ + page_cnt.u64 = 0; + page_cnt.s.bp_enb = 0; + page_cnt.s.page_cnt = 100; + for (interface = 0; interface < 2; interface++) { + for (port = cvmx_helper_get_first_ipd_port(interface); + port < cvmx_helper_get_last_ipd_port(interface); port++) + cvmx_write_csr(CVMX_IPD_PORTX_BP_PAGE_CNT(port), + page_cnt.u64); + } + + for (queue = 0; queue < 8; queue++) + cvmx_helper_setup_red_queue(queue, pass_thresh, drop_thresh); + + /* Shutoff the dropping based on the per port page count. SW isn't + decrementing it right now */ + ipd_bp_prt_red_end.u64 = 0; + ipd_bp_prt_red_end.s.prt_enb = 0; + cvmx_write_csr(CVMX_IPD_BP_PRT_RED_END, ipd_bp_prt_red_end.u64); + + red_port_enable.u64 = 0; + red_port_enable.s.prt_enb = 0xfffffffffull; + red_port_enable.s.avg_dly = 10000; + red_port_enable.s.prb_dly = 10000; + cvmx_write_csr(CVMX_IPD_RED_PORT_ENABLE, red_port_enable.u64); + + return 0; +} +EXPORT_SYMBOL_GPL(cvmx_helper_setup_red); + +/** + * Setup the common GMX settings that determine the number of + * ports. These setting apply to almost all configurations of all + * chips. + * + * @interface: Interface to configure + * @num_ports: Number of ports on the interface + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_setup_gmx(int interface, int num_ports) +{ + union cvmx_gmxx_tx_prts gmx_tx_prts; + union cvmx_gmxx_rx_prts gmx_rx_prts; + union cvmx_pko_reg_gmx_port_mode pko_mode; + union cvmx_gmxx_txx_thresh gmx_tx_thresh; + int index; + + /* Tell GMX the number of TX ports on this interface */ + gmx_tx_prts.u64 = cvmx_read_csr(CVMX_GMXX_TX_PRTS(interface)); + gmx_tx_prts.s.prts = num_ports; + cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), gmx_tx_prts.u64); + + /* Tell GMX the number of RX ports on this interface. This only + ** applies to *GMII and XAUI ports */ + if (cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_RGMII + || cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_SGMII + || cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_GMII + || cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_XAUI) { + if (num_ports > 4) { + cvmx_dprintf("__cvmx_helper_setup_gmx: Illegal " + "num_ports\n"); + return -1; + } + + gmx_rx_prts.u64 = cvmx_read_csr(CVMX_GMXX_RX_PRTS(interface)); + gmx_rx_prts.s.prts = num_ports; + cvmx_write_csr(CVMX_GMXX_RX_PRTS(interface), gmx_rx_prts.u64); + } + + /* Skip setting CVMX_PKO_REG_GMX_PORT_MODE on 30XX, 31XX, and 50XX */ + if (!OCTEON_IS_MODEL(OCTEON_CN30XX) && !OCTEON_IS_MODEL(OCTEON_CN31XX) + && !OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* Tell PKO the number of ports on this interface */ + pko_mode.u64 = cvmx_read_csr(CVMX_PKO_REG_GMX_PORT_MODE); + if (interface == 0) { + if (num_ports == 1) + pko_mode.s.mode0 = 4; + else if (num_ports == 2) + pko_mode.s.mode0 = 3; + else if (num_ports <= 4) + pko_mode.s.mode0 = 2; + else if (num_ports <= 8) + pko_mode.s.mode0 = 1; + else + pko_mode.s.mode0 = 0; + } else { + if (num_ports == 1) + pko_mode.s.mode1 = 4; + else if (num_ports == 2) + pko_mode.s.mode1 = 3; + else if (num_ports <= 4) + pko_mode.s.mode1 = 2; + else if (num_ports <= 8) + pko_mode.s.mode1 = 1; + else + pko_mode.s.mode1 = 0; + } + cvmx_write_csr(CVMX_PKO_REG_GMX_PORT_MODE, pko_mode.u64); + } + + /* + * Set GMX to buffer as much data as possible before starting + * transmit. This reduces the chances that we have a TX under + * run due to memory contention. Any packet that fits entirely + * in the GMX FIFO can never have an under run regardless of + * memory load. + */ + gmx_tx_thresh.u64 = cvmx_read_csr(CVMX_GMXX_TXX_THRESH(0, interface)); + if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* These chips have a fixed max threshold of 0x40 */ + gmx_tx_thresh.s.cnt = 0x40; + } else { + /* Choose the max value for the number of ports */ + if (num_ports <= 1) + gmx_tx_thresh.s.cnt = 0x100 / 1; + else if (num_ports == 2) + gmx_tx_thresh.s.cnt = 0x100 / 2; + else + gmx_tx_thresh.s.cnt = 0x100 / 4; + } + /* + * SPI and XAUI can have lots of ports but the GMX hardware + * only ever has a max of 4. + */ + if (num_ports > 4) + num_ports = 4; + for (index = 0; index < num_ports; index++) + cvmx_write_csr(CVMX_GMXX_TXX_THRESH(index, interface), + gmx_tx_thresh.u64); + + return 0; +} + +/** + * Returns the IPD/PKO port number for a port on the given + * interface. + * + * @interface: Interface to use + * @port: Port on the interface + * + * Returns IPD/PKO port number + */ +int cvmx_helper_get_ipd_port(int interface, int port) +{ + switch (interface) { + case 0: + return port; + case 1: + return port + 16; + case 2: + return port + 32; + case 3: + return port + 36; + case 4: + return port + 40; + case 5: + return port + 44; + } + return -1; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_ipd_port); + +/** + * Returns the interface number for an IPD/PKO port number. + * + * @ipd_port: IPD/PKO port number + * + * Returns Interface number + */ +int cvmx_helper_get_interface_num(int ipd_port) +{ + if (ipd_port < 16) + return 0; + else if (ipd_port < 32) + return 1; + else if (ipd_port < 36) + return 2; + else if (ipd_port < 40) + return 3; + else if (ipd_port < 44) + return 4; + else if (ipd_port < 48) + return 5; + else + cvmx_dprintf("cvmx_helper_get_interface_num: Illegal IPD " + "port number\n"); + + return -1; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_num); + +/** + * Returns the interface index number for an IPD/PKO port + * number. + * + * @ipd_port: IPD/PKO port number + * + * Returns Interface index number + */ +int cvmx_helper_get_interface_index_num(int ipd_port) +{ + if (ipd_port < 32) + return ipd_port & 15; + else if (ipd_port < 36) + return ipd_port & 3; + else if (ipd_port < 40) + return ipd_port & 3; + else if (ipd_port < 44) + return ipd_port & 3; + else if (ipd_port < 48) + return ipd_port & 3; + else + cvmx_dprintf("cvmx_helper_get_interface_index_num: " + "Illegal IPD port number\n"); + + return -1; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_index_num); diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c new file mode 100644 index 000000000..2bb6912a5 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c @@ -0,0 +1,360 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for XAUI initialization, configuration, + * and monitoring. + * + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> + +#include <asm/octeon/cvmx-pko-defs.h> +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-pcsx-defs.h> +#include <asm/octeon/cvmx-pcsxx-defs.h> + +int __cvmx_helper_xaui_enumerate(int interface) +{ + union cvmx_gmxx_hg2_control gmx_hg2_control; + + /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */ + gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface)); + if (gmx_hg2_control.s.hg2tx_en) + return 16; + else + return 1; +} + +/** + * Probe a XAUI interface and determine the number of ports + * connected to it. The XAUI interface should still be down + * after this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_xaui_probe(int interface) +{ + int i; + union cvmx_gmxx_inf_mode mode; + + /* + * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the + * interface needs to be enabled before IPD otherwise per port + * backpressure may not work properly. + */ + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + mode.s.en = 1; + cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64); + + __cvmx_helper_setup_gmx(interface, 1); + + /* + * Setup PKO to support 16 ports for HiGig2 virtual + * ports. We're pointing all of the PKO packet ports for this + * interface to the XAUI. This allows us to use HiGig2 + * backpressure per port. + */ + for (i = 0; i < 16; i++) { + union cvmx_pko_mem_port_ptrs pko_mem_port_ptrs; + pko_mem_port_ptrs.u64 = 0; + /* + * We set each PKO port to have equal priority in a + * round robin fashion. + */ + pko_mem_port_ptrs.s.static_p = 0; + pko_mem_port_ptrs.s.qos_mask = 0xff; + /* All PKO ports map to the same XAUI hardware port */ + pko_mem_port_ptrs.s.eid = interface * 4; + pko_mem_port_ptrs.s.pid = interface * 16 + i; + cvmx_write_csr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64); + } + return __cvmx_helper_xaui_enumerate(interface); +} + +/** + * Bringup and enable a XAUI interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_xaui_enable(int interface) +{ + union cvmx_gmxx_prtx_cfg gmx_cfg; + union cvmx_pcsxx_control1_reg xauiCtl; + union cvmx_pcsxx_misc_ctl_reg xauiMiscCtl; + union cvmx_gmxx_tx_xaui_ctl gmxXauiTxCtl; + union cvmx_gmxx_rxx_int_en gmx_rx_int_en; + union cvmx_gmxx_tx_int_en gmx_tx_int_en; + union cvmx_pcsxx_int_en_reg pcsx_int_en_reg; + + /* Setup PKND */ + if (octeon_has_feature(OCTEON_FEATURE_PKND)) { + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.pknd = cvmx_helper_get_ipd_port(interface, 0); + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + } + + /* (1) Interface has already been enabled. */ + + /* (2) Disable GMX. */ + xauiMiscCtl.u64 = cvmx_read_csr(CVMX_PCSXX_MISC_CTL_REG(interface)); + xauiMiscCtl.s.gmxeno = 1; + cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64); + + /* (3) Disable GMX and PCSX interrupts. */ + gmx_rx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_EN(0, interface)); + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); + gmx_tx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_TX_INT_EN(interface)); + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0); + pcsx_int_en_reg.u64 = cvmx_read_csr(CVMX_PCSXX_INT_EN_REG(interface)); + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); + + /* (4) Bring up the PCSX and GMX reconciliation layer. */ + /* (4)a Set polarity and lane swapping. */ + /* (4)b */ + gmxXauiTxCtl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); + /* Enable better IFG packing and improves performance */ + gmxXauiTxCtl.s.dic_en = 1; + gmxXauiTxCtl.s.uni_en = 0; + cvmx_write_csr(CVMX_GMXX_TX_XAUI_CTL(interface), gmxXauiTxCtl.u64); + + /* (4)c Aply reset sequence */ + xauiCtl.u64 = cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface)); + xauiCtl.s.lo_pwr = 0; + + /* Issuing a reset here seems to hang some CN68XX chips. */ + if (!OCTEON_IS_MODEL(OCTEON_CN68XX_PASS1_X) && + !OCTEON_IS_MODEL(OCTEON_CN68XX_PASS2_X)) + xauiCtl.s.reset = 1; + + cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface), xauiCtl.u64); + + /* Wait for PCS to come out of reset */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_CONTROL1_REG(interface), union cvmx_pcsxx_control1_reg, + reset, ==, 0, 10000)) + return -1; + /* Wait for PCS to be aligned */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_10GBX_STATUS_REG(interface), + union cvmx_pcsxx_10gbx_status_reg, alignd, ==, 1, 10000)) + return -1; + /* Wait for RX to be ready */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_RX_XAUI_CTL(interface), union cvmx_gmxx_rx_xaui_ctl, + status, ==, 0, 10000)) + return -1; + + /* (6) Configure GMX */ + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + /* Wait for GMX RX to be idle */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg, + rx_idle, ==, 1, 10000)) + return -1; + /* Wait for GMX TX to be idle */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg, + tx_idle, ==, 1, 10000)) + return -1; + + /* GMX configure */ + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.speed = 1; + gmx_cfg.s.speed_msb = 0; + gmx_cfg.s.slottime = 1; + cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(0, interface), 512); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(0, interface), 8192); + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + /* (7) Clear out any error state */ + cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(0, interface), + cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(0, interface))); + cvmx_write_csr(CVMX_GMXX_TX_INT_REG(interface), + cvmx_read_csr(CVMX_GMXX_TX_INT_REG(interface))); + cvmx_write_csr(CVMX_PCSXX_INT_REG(interface), + cvmx_read_csr(CVMX_PCSXX_INT_REG(interface))); + + /* Wait for receive link */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_STATUS1_REG(interface), union cvmx_pcsxx_status1_reg, + rcv_lnk, ==, 1, 10000)) + return -1; + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg, + xmtflt, ==, 0, 10000)) + return -1; + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg, + rcvflt, ==, 0, 10000)) + return -1; + + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), gmx_rx_int_en.u64); + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64); + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64); + + /* (8) Enable packet reception */ + xauiMiscCtl.s.gmxeno = 0; + cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64); + + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + __cvmx_interrupt_pcsx_intx_en_reg_enable(0, interface); + __cvmx_interrupt_pcsx_intx_en_reg_enable(1, interface); + __cvmx_interrupt_pcsx_intx_en_reg_enable(2, interface); + __cvmx_interrupt_pcsx_intx_en_reg_enable(3, interface); + __cvmx_interrupt_pcsxx_int_en_reg_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; + union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; + union cvmx_pcsxx_status1_reg pcsxx_status1_reg; + cvmx_helper_link_info_t result; + + gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); + gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface)); + pcsxx_status1_reg.u64 = + cvmx_read_csr(CVMX_PCSXX_STATUS1_REG(interface)); + result.u64 = 0; + + /* Only return a link if both RX and TX are happy */ + if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0) && + (pcsxx_status1_reg.s.rcv_lnk == 1)) { + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } else { + /* Disable GMX and PCSX interrupts. */ + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0); + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; + union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; + + gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); + gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface)); + + /* If the link shouldn't be up, then just return */ + if (!link_info.s.link_up) + return 0; + + /* Do nothing if both RX and TX are happy */ + if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0)) + return 0; + + /* Bring the link up */ + return __cvmx_helper_xaui_enable(interface); +} + +/** + * Configure a port for internal and/or external loopback. Internal loopback + * causes packets sent by the port to be received by Octeon. External loopback + * causes packets received from the wire to sent out again. + * + * @ipd_port: IPD/PKO port to loopback. + * @enable_internal: + * Non zero if you want internal loopback + * @enable_external: + * Non zero if you want external loopback + * + * Returns Zero on success, negative on failure. + */ +extern int __cvmx_helper_xaui_configure_loopback(int ipd_port, + int enable_internal, + int enable_external) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_pcsxx_control1_reg pcsxx_control1_reg; + union cvmx_gmxx_xaui_ext_loopback gmxx_xaui_ext_loopback; + + /* Set the internal loop */ + pcsxx_control1_reg.u64 = + cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface)); + pcsxx_control1_reg.s.loopbck1 = enable_internal; + cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface), + pcsxx_control1_reg.u64); + + /* Set the external loop */ + gmxx_xaui_ext_loopback.u64 = + cvmx_read_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface)); + gmxx_xaui_ext_loopback.s.en = enable_external; + cvmx_write_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface), + gmxx_xaui_ext_loopback.u64); + + /* Take the link through a reset */ + return __cvmx_helper_xaui_enable(interface); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c new file mode 100644 index 000000000..3ddbb98df --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -0,0 +1,1296 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Helper functions for common, but complicated tasks. + * + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-fpa.h> +#include <asm/octeon/cvmx-pip.h> +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-ipd.h> +#include <asm/octeon/cvmx-spi.h> +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-pip-defs.h> +#include <asm/octeon/cvmx-smix-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> + +/** + * cvmx_override_pko_queue_priority(int ipd_port, uint64_t + * priorities[16]) is a function pointer. It is meant to allow + * customization of the PKO queue priorities based on the port + * number. Users should set this pointer to a function before + * calling any cvmx-helper operations. + */ +void (*cvmx_override_pko_queue_priority) (int pko_port, + uint64_t priorities[16]); + +/** + * cvmx_override_ipd_port_setup(int ipd_port) is a function + * pointer. It is meant to allow customization of the IPD port + * setup before packet input/output comes online. It is called + * after cvmx-helper does the default IPD configuration, but + * before IPD is enabled. Users should set this pointer to a + * function before calling any cvmx-helper operations. + */ +void (*cvmx_override_ipd_port_setup) (int ipd_port); + +/* Port count per interface */ +static int interface_port_count[9]; + +/** + * Return the number of interfaces the chip has. Each interface + * may have multiple ports. Most chips support two interfaces, + * but the CNX0XX and CNX1XX are exceptions. These only support + * one interface. + * + * Returns Number of interfaces on chip + */ +int cvmx_helper_get_number_of_interfaces(void) +{ + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + return 9; + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) + return 4; + if (OCTEON_IS_MODEL(OCTEON_CN7XXX)) + return 5; + else + return 3; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_number_of_interfaces); + +/** + * Return the number of ports on an interface. Depending on the + * chip and configuration, this can be 1-16. A value of 0 + * specifies that the interface doesn't exist or isn't usable. + * + * @interface: Interface to get the port count for + * + * Returns Number of ports on interface. Can be Zero. + */ +int cvmx_helper_ports_on_interface(int interface) +{ + return interface_port_count[interface]; +} +EXPORT_SYMBOL_GPL(cvmx_helper_ports_on_interface); + +/** + * @INTERNAL + * Return interface mode for CN68xx. + */ +static cvmx_helper_interface_mode_t __cvmx_get_mode_cn68xx(int interface) +{ + union cvmx_mio_qlmx_cfg qlm_cfg; + switch (interface) { + case 0: + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0)); + /* QLM is disabled when QLM SPD is 15. */ + if (qlm_cfg.s.qlm_spd == 15) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 2: + case 3: + case 4: + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(interface)); + /* QLM is disabled when QLM SPD is 15. */ + if (qlm_cfg.s.qlm_spd == 15) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 7: + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(3)); + /* QLM is disabled when QLM SPD is 15. */ + if (qlm_cfg.s.qlm_spd == 15) { + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } else if (qlm_cfg.s.qlm_cfg != 0) { + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1)); + if (qlm_cfg.s.qlm_cfg != 0) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + return CVMX_HELPER_INTERFACE_MODE_NPI; + case 8: + return CVMX_HELPER_INTERFACE_MODE_LOOP; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } +} + +/** + * @INTERNAL + * Return interface mode for an Octeon II + */ +static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + return __cvmx_get_mode_cn68xx(interface); + + if (interface == 2) + return CVMX_HELPER_INTERFACE_MODE_NPI; + + if (interface == 3) + return CVMX_HELPER_INTERFACE_MODE_LOOP; + + /* Only present in CN63XX & CN66XX Octeon model */ + if ((OCTEON_IS_MODEL(OCTEON_CN63XX) && + (interface == 4 || interface == 5)) || + (OCTEON_IS_MODEL(OCTEON_CN66XX) && + interface >= 4 && interface <= 7)) { + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + + if (OCTEON_IS_MODEL(OCTEON_CN66XX)) { + union cvmx_mio_qlmx_cfg mio_qlm_cfg; + + /* QLM2 is SGMII0 and QLM1 is SGMII1 */ + if (interface == 0) + mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2)); + else if (interface == 1) + mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1)); + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mio_qlm_cfg.s.qlm_spd == 15) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mio_qlm_cfg.s.qlm_cfg == 9) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (mio_qlm_cfg.s.qlm_cfg == 11) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } else if (OCTEON_IS_MODEL(OCTEON_CN61XX)) { + union cvmx_mio_qlmx_cfg qlm_cfg; + + if (interface == 0) { + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2)); + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } else if (interface == 1) { + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0)); + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + } else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) { + if (interface == 0) { + union cvmx_mio_qlmx_cfg qlm_cfg; + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0)); + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + } + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + + if (interface == 1 && OCTEON_IS_MODEL(OCTEON_CN63XX)) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + switch (mode.cn63xx.mode) { + case 0: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + case 1: + return CVMX_HELPER_INTERFACE_MODE_XAUI; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + } else { + if (!mode.s.en) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mode.s.type) + return CVMX_HELPER_INTERFACE_MODE_GMII; + else + return CVMX_HELPER_INTERFACE_MODE_RGMII; + } +} + +/** + * @INTERNAL + * Return interface mode for CN7XXX. + */ +static cvmx_helper_interface_mode_t __cvmx_get_mode_cn7xxx(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + switch (interface) { + case 0: + case 1: + switch (mode.cn68xx.mode) { + case 0: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 1: + case 2: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + case 3: + return CVMX_HELPER_INTERFACE_MODE_XAUI; + default: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + } + case 2: + return CVMX_HELPER_INTERFACE_MODE_NPI; + case 3: + return CVMX_HELPER_INTERFACE_MODE_LOOP; + case 4: + /* TODO: Implement support for AGL (RGMII). */ + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } +} + +/** + * Get the operating mode of an interface. Depending on the Octeon + * chip and configuration, this function returns an enumeration + * of the type of packet I/O supported by an interface. + * + * @interface: Interface to probe + * + * Returns Mode of the interface. Unknown or unsupported interfaces return + * DISABLED. + */ +cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + if (interface < 0 || + interface >= cvmx_helper_get_number_of_interfaces()) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + /* + * OCTEON III models + */ + if (OCTEON_IS_MODEL(OCTEON_CN7XXX)) + return __cvmx_get_mode_cn7xxx(interface); + + /* + * Octeon II models + */ + if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)) + return __cvmx_get_mode_octeon2(interface); + + /* + * Octeon and Octeon Plus models + */ + if (interface == 2) + return CVMX_HELPER_INTERFACE_MODE_NPI; + + if (interface == 3) { + if (OCTEON_IS_MODEL(OCTEON_CN56XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX)) + return CVMX_HELPER_INTERFACE_MODE_LOOP; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + + if (interface == 0 + && cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5 + && cvmx_sysinfo_get()->board_rev_major == 1) { + /* + * Lie about interface type of CN3005 board. This + * board has a switch on port 1 like the other + * evaluation boards, but it is connected over RGMII + * instead of GMII. Report GMII mode so that the + * speed is forced to 1 Gbit full duplex. Other than + * some initial configuration (which does not use the + * output of this function) there is no difference in + * setup between GMII and RGMII modes. + */ + return CVMX_HELPER_INTERFACE_MODE_GMII; + } + + /* Interface 1 is always disabled on CN31XX and CN30XX */ + if ((interface == 1) + && (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX))) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + switch (mode.cn56xx.mode) { + case 0: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 1: + return CVMX_HELPER_INTERFACE_MODE_XAUI; + case 2: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + case 3: + return CVMX_HELPER_INTERFACE_MODE_PICMG; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + } else { + if (!mode.s.en) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mode.s.type) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) + return CVMX_HELPER_INTERFACE_MODE_SPI; + else + return CVMX_HELPER_INTERFACE_MODE_GMII; + } else + return CVMX_HELPER_INTERFACE_MODE_RGMII; + } +} +EXPORT_SYMBOL_GPL(cvmx_helper_interface_get_mode); + +/** + * Configure the IPD/PIP tagging and QoS options for a specific + * port. This function determines the POW work queue entry + * contents for a port. The setup performed here is controlled by + * the defines in executive-config.h. + * + * @ipd_port: Port to configure. This follows the IPD numbering, not the + * per interface numbering + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_port_setup_ipd(int ipd_port) +{ + union cvmx_pip_prt_cfgx port_config; + union cvmx_pip_prt_tagx tag_config; + + port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + tag_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_TAGX(ipd_port)); + + /* Have each port go to a different POW queue */ + port_config.s.qos = ipd_port & 0x7; + + /* Process the headers and place the IP header in the work queue */ + port_config.s.mode = CVMX_HELPER_INPUT_PORT_SKIP_MODE; + + tag_config.s.ip6_src_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP; + tag_config.s.ip6_dst_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_IP; + tag_config.s.ip6_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT; + tag_config.s.ip6_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT; + tag_config.s.ip6_nxth_flag = CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER; + tag_config.s.ip4_src_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP; + tag_config.s.ip4_dst_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_IP; + tag_config.s.ip4_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT; + tag_config.s.ip4_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT; + tag_config.s.ip4_pctl_flag = CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL; + tag_config.s.inc_prt_flag = CVMX_HELPER_INPUT_TAG_INPUT_PORT; + tag_config.s.tcp6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.tcp4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.ip6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.ip4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.non_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + /* Put all packets in group 0. Other groups can be used by the app */ + tag_config.s.grp = 0; + + cvmx_pip_config_port(ipd_port, port_config, tag_config); + + /* Give the user a chance to override our setting for each port */ + if (cvmx_override_ipd_port_setup) + cvmx_override_ipd_port_setup(ipd_port); + + return 0; +} + +/** + * This function sets the interface_port_count[interface] correctly, + * without modifying any hardware configuration. Hardware setup of + * the ports will be performed later. + * + * @interface: Interface to probe + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_interface_enumerate(int interface) +{ + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + interface_port_count[interface] = 0; + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + interface_port_count[interface] = + __cvmx_helper_xaui_enumerate(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + interface_port_count[interface] = + __cvmx_helper_rgmii_enumerate(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end. + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + interface_port_count[interface] = + __cvmx_helper_spi_enumerate(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up. + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + interface_port_count[interface] = + __cvmx_helper_sgmii_enumerate(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + interface_port_count[interface] = + __cvmx_helper_npi_enumerate(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode. + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + interface_port_count[interface] = + __cvmx_helper_loop_enumerate(interface); + break; + } + + interface_port_count[interface] = + __cvmx_helper_board_interface_probe(interface, + interface_port_count + [interface]); + + /* Make sure all global variables propagate to other cores */ + CVMX_SYNCWS; + + return 0; +} + +/** + * This function probes an interface to determine the actual + * number of hardware ports connected to it. It doesn't setup the + * ports or enable them. The main goal here is to set the global + * interface_port_count[interface] correctly. Hardware setup of the + * ports will be performed later. + * + * @interface: Interface to probe + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_interface_probe(int interface) +{ + cvmx_helper_interface_enumerate(interface); + /* At this stage in the game we don't want packets to be moving yet. + The following probe calls should perform hardware setup + needed to determine port counts. Receive must still be disabled */ + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + __cvmx_helper_xaui_probe(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + __cvmx_helper_rgmii_probe(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end. + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + __cvmx_helper_spi_probe(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up. + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + __cvmx_helper_sgmii_probe(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + __cvmx_helper_npi_probe(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode. + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + __cvmx_helper_loop_probe(interface); + break; + } + + /* Make sure all global variables propagate to other cores */ + CVMX_SYNCWS; + + return 0; +} + +/** + * Setup the IPD/PIP for the ports on an interface. Packet + * classification and tagging are set for every port on the + * interface. The number of ports on the interface must already + * have been probed. + * + * @interface: Interface to setup IPD/PIP for + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_interface_setup_ipd(int interface) +{ + int ipd_port = cvmx_helper_get_ipd_port(interface, 0); + int num_ports = interface_port_count[interface]; + + while (num_ports--) { + __cvmx_helper_port_setup_ipd(ipd_port); + ipd_port++; + } + return 0; +} + +/** + * Setup global setting for IPD/PIP not related to a specific + * interface or port. This must be called before IPD is enabled. + * + * Returns Zero on success, negative on failure. + */ +static int __cvmx_helper_global_setup_ipd(void) +{ + /* Setup the global packet input options */ + cvmx_ipd_config(CVMX_FPA_PACKET_POOL_SIZE / 8, + CVMX_HELPER_FIRST_MBUFF_SKIP / 8, + CVMX_HELPER_NOT_FIRST_MBUFF_SKIP / 8, + /* The +8 is to account for the next ptr */ + (CVMX_HELPER_FIRST_MBUFF_SKIP + 8) / 128, + /* The +8 is to account for the next ptr */ + (CVMX_HELPER_NOT_FIRST_MBUFF_SKIP + 8) / 128, + CVMX_FPA_WQE_POOL, + CVMX_IPD_OPC_MODE_STT, + CVMX_HELPER_ENABLE_BACK_PRESSURE); + return 0; +} + +/** + * Setup the PKO for the ports on an interface. The number of + * queues per port and the priority of each PKO output queue + * is set here. PKO must be disabled when this function is called. + * + * @interface: Interface to setup PKO for + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_interface_setup_pko(int interface) +{ + /* + * Each packet output queue has an associated priority. The + * higher the priority, the more often it can send a packet. A + * priority of 8 means it can send in all 8 rounds of + * contention. We're going to make each queue one less than + * the last. The vector of priorities has been extended to + * support CN5xxx CPUs, where up to 16 queues can be + * associated to a port. To keep backward compatibility we + * don't change the initial 8 priorities and replicate them in + * the second half. With per-core PKO queues (PKO lockless + * operation) all queues have the same priority. + */ + uint64_t priorities[16] = + { 8, 7, 6, 5, 4, 3, 2, 1, 8, 7, 6, 5, 4, 3, 2, 1 }; + + /* + * Setup the IPD/PIP and PKO for the ports discovered + * above. Here packet classification, tagging and output + * priorities are set. + */ + int ipd_port = cvmx_helper_get_ipd_port(interface, 0); + int num_ports = interface_port_count[interface]; + while (num_ports--) { + /* + * Give the user a chance to override the per queue + * priorities. + */ + if (cvmx_override_pko_queue_priority) + cvmx_override_pko_queue_priority(ipd_port, priorities); + + cvmx_pko_config_port(ipd_port, + cvmx_pko_get_base_queue_per_core(ipd_port, + 0), + cvmx_pko_get_num_queues(ipd_port), + priorities); + ipd_port++; + } + return 0; +} + +/** + * Setup global setting for PKO not related to a specific + * interface or port. This must be called before PKO is enabled. + * + * Returns Zero on success, negative on failure. + */ +static int __cvmx_helper_global_setup_pko(void) +{ + /* + * Disable tagwait FAU timeout. This needs to be done before + * anyone might start packet output using tags. + */ + union cvmx_iob_fau_timeout fau_to; + fau_to.u64 = 0; + fau_to.s.tout_val = 0xfff; + fau_to.s.tout_enb = 0; + cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_to.u64); + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { + union cvmx_pko_reg_min_pkt min_pkt; + + min_pkt.u64 = 0; + min_pkt.s.size1 = 59; + min_pkt.s.size2 = 59; + min_pkt.s.size3 = 59; + min_pkt.s.size4 = 59; + min_pkt.s.size5 = 59; + min_pkt.s.size6 = 59; + min_pkt.s.size7 = 59; + cvmx_write_csr(CVMX_PKO_REG_MIN_PKT, min_pkt.u64); + } + + return 0; +} + +/** + * Setup global backpressure setting. + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_global_setup_backpressure(void) +{ +#if CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE + /* Disable backpressure if configured to do so */ + /* Disable backpressure (pause frame) generation */ + int num_interfaces = cvmx_helper_get_number_of_interfaces(); + int interface; + for (interface = 0; interface < num_interfaces; interface++) { + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + case CVMX_HELPER_INTERFACE_MODE_XAUI: + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + case CVMX_HELPER_INTERFACE_MODE_SPI: + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + cvmx_gmx_set_backpressure_override(interface, 0xf); + break; + } + } +#endif + + return 0; +} + +/** + * Enable packet input/output from the hardware. This function is + * called after all internal setup is complete and IPD is enabled. + * After this function completes, packets will be accepted from the + * hardware ports. PKO should still be disabled to make sure packets + * aren't sent out partially setup hardware. + * + * @interface: Interface to enable + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_packet_hardware_enable(int interface) +{ + int result = 0; + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + /* Nothing to do */ + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_enable(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = __cvmx_helper_rgmii_enable(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_enable(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_enable(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + result = __cvmx_helper_npi_enable(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + result = __cvmx_helper_loop_enable(interface); + break; + } + result |= __cvmx_helper_board_hardware_enable(interface); + return result; +} + +/** + * Function to adjust internal IPD pointer alignments + * + * Returns 0 on success + * !0 on failure + */ +int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) +{ +#define FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES \ + (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_FIRST_MBUFF_SKIP) +#define FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES \ + (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_NOT_FIRST_MBUFF_SKIP) +#define FIX_IPD_OUTPORT 0 + /* Ports 0-15 are interface 0, 16-31 are interface 1 */ +#define INTERFACE(port) (port >> 4) +#define INDEX(port) (port & 0xf) + uint64_t *p64; + cvmx_pko_command_word0_t pko_command; + union cvmx_buf_ptr g_buffer, pkt_buffer; + cvmx_wqe_t *work; + int size, num_segs = 0, wqe_pcnt, pkt_pcnt; + union cvmx_gmxx_prtx_cfg gmx_cfg; + int retry_cnt; + int retry_loop_cnt; + int i; + + /* Save values for restore at end */ + uint64_t prtx_cfg = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + uint64_t tx_ptr_en = + cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); + uint64_t rx_ptr_en = + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); + uint64_t rxx_jabber = + cvmx_read_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + uint64_t frame_max = + cvmx_read_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + + /* Configure port to gig FDX as required for loopback mode */ + cvmx_helper_rgmii_internal_loopback(FIX_IPD_OUTPORT); + + /* + * Disable reception on all ports so if traffic is present it + * will not interfere. + */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0); + + __delay(100000000ull); + + for (retry_loop_cnt = 0; retry_loop_cnt < 10; retry_loop_cnt++) { + retry_cnt = 100000; + wqe_pcnt = cvmx_read_csr(CVMX_IPD_PTR_COUNT); + pkt_pcnt = (wqe_pcnt >> 7) & 0x7f; + wqe_pcnt &= 0x7f; + + num_segs = (2 + pkt_pcnt - wqe_pcnt) & 3; + + if (num_segs == 0) + goto fix_ipd_exit; + + num_segs += 1; + + size = + FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES + + ((num_segs - 1) * FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES) - + (FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES / 2); + + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + CVMX_SYNC; + + g_buffer.u64 = 0; + g_buffer.s.addr = + cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_WQE_POOL)); + if (g_buffer.s.addr == 0) { + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "buffer allocation failure.\n"); + goto fix_ipd_exit; + } + + g_buffer.s.pool = CVMX_FPA_WQE_POOL; + g_buffer.s.size = num_segs; + + pkt_buffer.u64 = 0; + pkt_buffer.s.addr = + cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL)); + if (pkt_buffer.s.addr == 0) { + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "buffer allocation failure.\n"); + goto fix_ipd_exit; + } + pkt_buffer.s.i = 1; + pkt_buffer.s.pool = CVMX_FPA_PACKET_POOL; + pkt_buffer.s.size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES; + + p64 = (uint64_t *) cvmx_phys_to_ptr(pkt_buffer.s.addr); + p64[0] = 0xffffffffffff0000ull; + p64[1] = 0x08004510ull; + p64[2] = ((uint64_t) (size - 14) << 48) | 0x5ae740004000ull; + p64[3] = 0x3a5fc0a81073c0a8ull; + + for (i = 0; i < num_segs; i++) { + if (i > 0) + pkt_buffer.s.size = + FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES; + + if (i == (num_segs - 1)) + pkt_buffer.s.i = 0; + + *(uint64_t *) cvmx_phys_to_ptr(g_buffer.s.addr + + 8 * i) = pkt_buffer.u64; + } + + /* Build the PKO command */ + pko_command.u64 = 0; + pko_command.s.segs = num_segs; + pko_command.s.total_bytes = size; + pko_command.s.dontfree = 0; + pko_command.s.gather = 1; + + gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT))); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), gmx_cfg.u64); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + + cvmx_write_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); + + cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT, + cvmx_pko_get_base_queue + (FIX_IPD_OUTPORT), + CVMX_PKO_LOCK_CMD_QUEUE); + cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT, + cvmx_pko_get_base_queue + (FIX_IPD_OUTPORT), pko_command, + g_buffer, CVMX_PKO_LOCK_CMD_QUEUE); + + CVMX_SYNC; + + do { + work = cvmx_pow_work_request_sync(CVMX_POW_WAIT); + retry_cnt--; + } while ((work == NULL) && (retry_cnt > 0)); + + if (!retry_cnt) + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "get_work() timeout occurred.\n"); + + /* Free packet */ + if (work) + cvmx_helper_free_packet_data(work); + } + +fix_ipd_exit: + + /* Return CSR configs to saved values */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + prtx_cfg); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + tx_ptr_en); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + rx_ptr_en); + cvmx_write_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + rxx_jabber); + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + frame_max); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0); + + CVMX_SYNC; + if (num_segs) + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT failed.\n"); + + return !!num_segs; + +} + +/** + * Called after all internal packet IO paths are setup. This + * function enables IPD/PIP and begins packet input and output. + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_ipd_and_packet_input_enable(void) +{ + int num_interfaces; + int interface; + + /* Enable IPD */ + cvmx_ipd_enable(); + + /* + * Time to enable hardware ports packet input and output. Note + * that at this point IPD/PIP must be fully functional and PKO + * must be disabled + */ + num_interfaces = cvmx_helper_get_number_of_interfaces(); + for (interface = 0; interface < num_interfaces; interface++) { + if (cvmx_helper_ports_on_interface(interface) > 0) + __cvmx_helper_packet_hardware_enable(interface); + } + + /* Finally enable PKO now that the entire path is up and running */ + cvmx_pko_enable(); + + if ((OCTEON_IS_MODEL(OCTEON_CN31XX_PASS1) + || OCTEON_IS_MODEL(OCTEON_CN30XX_PASS1)) + && (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM)) + __cvmx_helper_errata_fix_ipd_ptr_alignment(); + return 0; +} +EXPORT_SYMBOL_GPL(cvmx_helper_ipd_and_packet_input_enable); + +/** + * Initialize the PIP, IPD, and PKO hardware to support + * simple priority based queues for the ethernet ports. Each + * port is configured with a number of priority queues based + * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower + * priority than the previous. + * + * Returns Zero on success, non-zero on failure + */ +int cvmx_helper_initialize_packet_io_global(void) +{ + int result = 0; + int interface; + union cvmx_l2c_cfg l2c_cfg; + union cvmx_smix_en smix_en; + const int num_interfaces = cvmx_helper_get_number_of_interfaces(); + + /* + * CN52XX pass 1: Due to a bug in 2nd order CDR, it needs to + * be disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) + __cvmx_helper_errata_qlm_disable_2nd_order_cdr(1); + + /* + * Tell L2 to give the IOB statically higher priority compared + * to the cores. This avoids conditions where IO blocks might + * be starved under very high L2 loads. + */ + l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG); + l2c_cfg.s.lrf_arb_mode = 0; + l2c_cfg.s.rfb_arb_mode = 0; + cvmx_write_csr(CVMX_L2C_CFG, l2c_cfg.u64); + + /* Make sure SMI/MDIO is enabled so we can query PHYs */ + smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(0)); + if (!smix_en.s.en) { + smix_en.s.en = 1; + cvmx_write_csr(CVMX_SMIX_EN(0), smix_en.u64); + } + + /* Newer chips actually have two SMI/MDIO interfaces */ + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) && + !OCTEON_IS_MODEL(OCTEON_CN58XX) && + !OCTEON_IS_MODEL(OCTEON_CN50XX)) { + smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(1)); + if (!smix_en.s.en) { + smix_en.s.en = 1; + cvmx_write_csr(CVMX_SMIX_EN(1), smix_en.u64); + } + } + + cvmx_pko_initialize_global(); + for (interface = 0; interface < num_interfaces; interface++) { + result |= cvmx_helper_interface_probe(interface); + if (cvmx_helper_ports_on_interface(interface) > 0) + cvmx_dprintf("Interface %d has %d ports (%s)\n", + interface, + cvmx_helper_ports_on_interface(interface), + cvmx_helper_interface_mode_to_string + (cvmx_helper_interface_get_mode + (interface))); + result |= __cvmx_helper_interface_setup_ipd(interface); + result |= __cvmx_helper_interface_setup_pko(interface); + } + + result |= __cvmx_helper_global_setup_ipd(); + result |= __cvmx_helper_global_setup_pko(); + + /* Enable any flow control and backpressure */ + result |= __cvmx_helper_global_setup_backpressure(); + +#if CVMX_HELPER_ENABLE_IPD + result |= cvmx_helper_ipd_and_packet_input_enable(); +#endif + return result; +} +EXPORT_SYMBOL_GPL(cvmx_helper_initialize_packet_io_global); + +/** + * Does core local initialization for packet io + * + * Returns Zero on success, non-zero on failure + */ +int cvmx_helper_initialize_packet_io_local(void) +{ + return cvmx_pko_initialize_local(); +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + /* The default result will be a down link unless the code below + changes it */ + result.u64 = 0; + + if (index >= cvmx_helper_ports_on_interface(interface)) + return result; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + /* Network links are not supported */ + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_GMII: + if (index == 0) + result = __cvmx_helper_rgmii_link_get(ipd_port); + else { + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + } + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + result = __cvmx_helper_rgmii_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + /* Network links are not supported */ + break; + } + return result; +} +EXPORT_SYMBOL_GPL(cvmx_helper_link_get); + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info) +{ + int result = -1; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + if (index >= cvmx_helper_ports_on_interface(interface)) + return -1; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_link_set(ipd_port, link_info); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = __cvmx_helper_rgmii_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + break; + } + return result; +} +EXPORT_SYMBOL_GPL(cvmx_helper_link_set); + +/** + * Configure a port for internal and/or external loopback. Internal loopback + * causes packets sent by the port to be received by Octeon. External loopback + * causes packets received from the wire to sent out again. + * + * @ipd_port: IPD/PKO port to loopback. + * @enable_internal: + * Non zero if you want internal loopback + * @enable_external: + * Non zero if you want external loopback + * + * Returns Zero on success, negative on failure. + */ +int cvmx_helper_configure_loopback(int ipd_port, int enable_internal, + int enable_external) +{ + int result = -1; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + if (index >= cvmx_helper_ports_on_interface(interface)) + return -1; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + case CVMX_HELPER_INTERFACE_MODE_SPI: + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = + __cvmx_helper_xaui_configure_loopback(ipd_port, + enable_internal, + enable_external); + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = + __cvmx_helper_rgmii_configure_loopback(ipd_port, + enable_internal, + enable_external); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = + __cvmx_helper_sgmii_configure_loopback(ipd_port, + enable_internal, + enable_external); + break; + } + return result; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c new file mode 100644 index 000000000..2f415d9d0 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c @@ -0,0 +1,371 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2009 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Automatically generated functions useful for enabling + * and decoding RSL_INT_BLOCKS interrupts. + * + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-pcsx-defs.h> +#include <asm/octeon/cvmx-pcsxx-defs.h> +#include <asm/octeon/cvmx-spxx-defs.h> +#include <asm/octeon/cvmx-stxx-defs.h> + +#ifndef PRINT_ERROR +#define PRINT_ERROR(format, ...) +#endif + + +/** + * __cvmx_interrupt_gmxx_rxx_int_en_enable enables all interrupt bits in cvmx_gmxx_rxx_int_en_t + */ +void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block) +{ + union cvmx_gmxx_rxx_int_en gmx_rx_int_en; + cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, block), + cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(index, block))); + gmx_rx_int_en.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) { + /* Skipping gmx_rx_int_en.s.reserved_29_63 */ + gmx_rx_int_en.s.hg2cc = 1; + gmx_rx_int_en.s.hg2fld = 1; + gmx_rx_int_en.s.undat = 1; + gmx_rx_int_en.s.uneop = 1; + gmx_rx_int_en.s.unsop = 1; + gmx_rx_int_en.s.bad_term = 1; + gmx_rx_int_en.s.bad_seq = 1; + gmx_rx_int_en.s.rem_fault = 1; + gmx_rx_int_en.s.loc_fault = 1; + gmx_rx_int_en.s.pause_drp = 1; + /* Skipping gmx_rx_int_en.s.reserved_16_18 */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + /* Skipping gmx_rx_int_en.s.reserved_9_9 */ + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /* Skipping gmx_rx_int_en.s.reserved_5_6 */ + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + /* Skipping gmx_rx_int_en.s.reserved_2_2 */ + gmx_rx_int_en.s.carext = 1; + /* Skipping gmx_rx_int_en.s.reserved_0_0 */ + } + if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { + /* Skipping gmx_rx_int_en.s.reserved_19_63 */ + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* Skipping gmx_rx_int_en.s.reserved_20_63 */ + gmx_rx_int_en.s.pause_drp = 1; + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /* Skipping gmx_rx_int_en.s.reserved_6_6 */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + /* Skipping gmx_rx_int_en.s.reserved_2_2 */ + gmx_rx_int_en.s.carext = 1; + /* Skipping gmx_rx_int_en.s.reserved_0_0 */ + } + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + /* Skipping gmx_rx_int_en.s.reserved_19_63 */ + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN31XX)) { + /* Skipping gmx_rx_int_en.s.reserved_19_63 */ + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* Skipping gmx_rx_int_en.s.reserved_20_63 */ + gmx_rx_int_en.s.pause_drp = 1; + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + /* Skipping gmx_rx_int_en.s.reserved_29_63 */ + gmx_rx_int_en.s.hg2cc = 1; + gmx_rx_int_en.s.hg2fld = 1; + gmx_rx_int_en.s.undat = 1; + gmx_rx_int_en.s.uneop = 1; + gmx_rx_int_en.s.unsop = 1; + gmx_rx_int_en.s.bad_term = 1; + gmx_rx_int_en.s.bad_seq = 0; + gmx_rx_int_en.s.rem_fault = 1; + gmx_rx_int_en.s.loc_fault = 0; + gmx_rx_int_en.s.pause_drp = 1; + /* Skipping gmx_rx_int_en.s.reserved_16_18 */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + /* Skipping gmx_rx_int_en.s.reserved_9_9 */ + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /* Skipping gmx_rx_int_en.s.reserved_5_6 */ + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + /* Skipping gmx_rx_int_en.s.reserved_2_2 */ + gmx_rx_int_en.s.carext = 1; + /* Skipping gmx_rx_int_en.s.reserved_0_0 */ + } + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(index, block), gmx_rx_int_en.u64); +} +/** + * __cvmx_interrupt_pcsx_intx_en_reg_enable enables all interrupt bits in cvmx_pcsx_intx_en_reg_t + */ +void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block) +{ + union cvmx_pcsx_intx_en_reg pcs_int_en_reg; + cvmx_write_csr(CVMX_PCSX_INTX_REG(index, block), + cvmx_read_csr(CVMX_PCSX_INTX_REG(index, block))); + pcs_int_en_reg.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) { + /* Skipping pcs_int_en_reg.s.reserved_12_63 */ + /*pcs_int_en_reg.s.dup = 1; // This happens during normal operation */ + pcs_int_en_reg.s.sync_bad_en = 1; + pcs_int_en_reg.s.an_bad_en = 1; + pcs_int_en_reg.s.rxlock_en = 1; + pcs_int_en_reg.s.rxbad_en = 1; + /*pcs_int_en_reg.s.rxerr_en = 1; // This happens during normal operation */ + pcs_int_en_reg.s.txbad_en = 1; + pcs_int_en_reg.s.txfifo_en = 1; + pcs_int_en_reg.s.txfifu_en = 1; + pcs_int_en_reg.s.an_err_en = 1; + /*pcs_int_en_reg.s.xmit_en = 1; // This happens during normal operation */ + /*pcs_int_en_reg.s.lnkspd_en = 1; // This happens during normal operation */ + } + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + /* Skipping pcs_int_en_reg.s.reserved_12_63 */ + /*pcs_int_en_reg.s.dup = 1; // This happens during normal operation */ + pcs_int_en_reg.s.sync_bad_en = 1; + pcs_int_en_reg.s.an_bad_en = 1; + pcs_int_en_reg.s.rxlock_en = 1; + pcs_int_en_reg.s.rxbad_en = 1; + /*pcs_int_en_reg.s.rxerr_en = 1; // This happens during normal operation */ + pcs_int_en_reg.s.txbad_en = 1; + pcs_int_en_reg.s.txfifo_en = 1; + pcs_int_en_reg.s.txfifu_en = 1; + pcs_int_en_reg.s.an_err_en = 1; + /*pcs_int_en_reg.s.xmit_en = 1; // This happens during normal operation */ + /*pcs_int_en_reg.s.lnkspd_en = 1; // This happens during normal operation */ + } + cvmx_write_csr(CVMX_PCSX_INTX_EN_REG(index, block), pcs_int_en_reg.u64); +} +/** + * __cvmx_interrupt_pcsxx_int_en_reg_enable enables all interrupt bits in cvmx_pcsxx_int_en_reg_t + */ +void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index) +{ + union cvmx_pcsxx_int_en_reg pcsx_int_en_reg; + cvmx_write_csr(CVMX_PCSXX_INT_REG(index), + cvmx_read_csr(CVMX_PCSXX_INT_REG(index))); + pcsx_int_en_reg.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) { + /* Skipping pcsx_int_en_reg.s.reserved_6_63 */ + pcsx_int_en_reg.s.algnlos_en = 1; + pcsx_int_en_reg.s.synlos_en = 1; + pcsx_int_en_reg.s.bitlckls_en = 1; + pcsx_int_en_reg.s.rxsynbad_en = 1; + pcsx_int_en_reg.s.rxbad_en = 1; + pcsx_int_en_reg.s.txflt_en = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + /* Skipping pcsx_int_en_reg.s.reserved_6_63 */ + pcsx_int_en_reg.s.algnlos_en = 1; + pcsx_int_en_reg.s.synlos_en = 1; + pcsx_int_en_reg.s.bitlckls_en = 0; /* Happens if XAUI module is not installed */ + pcsx_int_en_reg.s.rxsynbad_en = 1; + pcsx_int_en_reg.s.rxbad_en = 1; + pcsx_int_en_reg.s.txflt_en = 1; + } + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(index), pcsx_int_en_reg.u64); +} + +/** + * __cvmx_interrupt_spxx_int_msk_enable enables all interrupt bits in cvmx_spxx_int_msk_t + */ +void __cvmx_interrupt_spxx_int_msk_enable(int index) +{ + union cvmx_spxx_int_msk spx_int_msk; + cvmx_write_csr(CVMX_SPXX_INT_REG(index), + cvmx_read_csr(CVMX_SPXX_INT_REG(index))); + spx_int_msk.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + /* Skipping spx_int_msk.s.reserved_12_63 */ + spx_int_msk.s.calerr = 1; + spx_int_msk.s.syncerr = 1; + spx_int_msk.s.diperr = 1; + spx_int_msk.s.tpaovr = 1; + spx_int_msk.s.rsverr = 1; + spx_int_msk.s.drwnng = 1; + spx_int_msk.s.clserr = 1; + spx_int_msk.s.spiovr = 1; + /* Skipping spx_int_msk.s.reserved_2_3 */ + spx_int_msk.s.abnorm = 1; + spx_int_msk.s.prtnxa = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* Skipping spx_int_msk.s.reserved_12_63 */ + spx_int_msk.s.calerr = 1; + spx_int_msk.s.syncerr = 1; + spx_int_msk.s.diperr = 1; + spx_int_msk.s.tpaovr = 1; + spx_int_msk.s.rsverr = 1; + spx_int_msk.s.drwnng = 1; + spx_int_msk.s.clserr = 1; + spx_int_msk.s.spiovr = 1; + /* Skipping spx_int_msk.s.reserved_2_3 */ + spx_int_msk.s.abnorm = 1; + spx_int_msk.s.prtnxa = 1; + } + cvmx_write_csr(CVMX_SPXX_INT_MSK(index), spx_int_msk.u64); +} +/** + * __cvmx_interrupt_stxx_int_msk_enable enables all interrupt bits in cvmx_stxx_int_msk_t + */ +void __cvmx_interrupt_stxx_int_msk_enable(int index) +{ + union cvmx_stxx_int_msk stx_int_msk; + cvmx_write_csr(CVMX_STXX_INT_REG(index), + cvmx_read_csr(CVMX_STXX_INT_REG(index))); + stx_int_msk.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + /* Skipping stx_int_msk.s.reserved_8_63 */ + stx_int_msk.s.frmerr = 1; + stx_int_msk.s.unxfrm = 1; + stx_int_msk.s.nosync = 1; + stx_int_msk.s.diperr = 1; + stx_int_msk.s.datovr = 1; + stx_int_msk.s.ovrbst = 1; + stx_int_msk.s.calpar1 = 1; + stx_int_msk.s.calpar0 = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* Skipping stx_int_msk.s.reserved_8_63 */ + stx_int_msk.s.frmerr = 1; + stx_int_msk.s.unxfrm = 1; + stx_int_msk.s.nosync = 1; + stx_int_msk.s.diperr = 1; + stx_int_msk.s.datovr = 1; + stx_int_msk.s.ovrbst = 1; + stx_int_msk.s.calpar1 = 1; + stx_int_msk.s.calpar0 = 1; + } + cvmx_write_csr(CVMX_STXX_INT_MSK(index), stx_int_msk.u64); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c new file mode 100644 index 000000000..fa327ec89 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c @@ -0,0 +1,140 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Utility functions to decode Octeon's RSL_INT_BLOCKS + * interrupts into error messages. + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-asxx-defs.h> +#include <asm/octeon/cvmx-gmxx-defs.h> + +#ifndef PRINT_ERROR +#define PRINT_ERROR(format, ...) +#endif + +void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block); + +/** + * Enable ASX error interrupts that exist on CN3XXX, CN50XX, and + * CN58XX. + * + * @block: Interface to enable 0-1 + */ +void __cvmx_interrupt_asxx_enable(int block) +{ + int mask; + union cvmx_asxx_int_en csr; + /* + * CN38XX and CN58XX have two interfaces with 4 ports per + * interface. All other chips have a max of 3 ports on + * interface 0 + */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)) + mask = 0xf; /* Set enables for 4 ports */ + else + mask = 0x7; /* Set enables for 3 ports */ + + /* Enable interface interrupts */ + csr.u64 = cvmx_read_csr(CVMX_ASXX_INT_EN(block)); + csr.s.txpsh = mask; + csr.s.txpop = mask; + csr.s.ovrflw = mask; + cvmx_write_csr(CVMX_ASXX_INT_EN(block), csr.u64); +} +/** + * Enable GMX error reporting for the supplied interface + * + * @interface: Interface to enable + */ +void __cvmx_interrupt_gmxx_enable(int interface) +{ + union cvmx_gmxx_inf_mode mode; + union cvmx_gmxx_tx_int_en gmx_tx_int_en; + int num_ports; + int index; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + if (mode.s.en) { + switch (mode.cn56xx.mode) { + case 1: /* XAUI */ + num_ports = 1; + break; + case 2: /* SGMII */ + case 3: /* PICMG */ + num_ports = 4; + break; + default: /* Disabled */ + num_ports = 0; + break; + } + } else + num_ports = 0; + } else { + if (mode.s.en) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* + * SPI on CN38XX and CN58XX report all + * errors through port 0. RGMII needs + * to check all 4 ports + */ + if (mode.s.type) + num_ports = 1; + else + num_ports = 4; + } else { + /* + * CN30XX, CN31XX, and CN50XX have two + * or three ports. GMII and MII has 2, + * RGMII has three + */ + if (mode.s.type) + num_ports = 2; + else + num_ports = 3; + } + } else + num_ports = 0; + } + + gmx_tx_int_en.u64 = 0; + if (num_ports) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) + gmx_tx_int_en.cn38xx.ncb_nxa = 1; + gmx_tx_int_en.s.pko_nxa = 1; + } + gmx_tx_int_en.s.undflw = (1 << num_ports) - 1; + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64); + for (index = 0; index < num_ports; index++) + __cvmx_interrupt_gmxx_rxx_int_en_enable(index, interface); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c new file mode 100644 index 000000000..f091c9b70 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -0,0 +1,920 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2017 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Implementation of the Level 2 Cache (L2C) control, + * measurement, and debugging facilities. + */ + +#include <linux/compiler.h> +#include <linux/irqflags.h> +#include <asm/octeon/cvmx.h> +#include <asm/octeon/cvmx-l2c.h> +#include <asm/octeon/cvmx-spinlock.h> + +/* + * This spinlock is used internally to ensure that only one core is + * performing certain L2 operations at a time. + * + * NOTE: This only protects calls from within a single application - + * if multiple applications or operating systems are running, then it + * is up to the user program to coordinate between them. + */ +cvmx_spinlock_t cvmx_l2c_spinlock; + +int cvmx_l2c_get_core_way_partition(uint32_t core) +{ + uint32_t field; + + /* Validate the core number */ + if (core >= cvmx_octeon_num_cores()) + return -1; + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + return cvmx_read_csr(CVMX_L2C_WPAR_PPX(core)) & 0xffff; + + /* + * Use the lower two bits of the coreNumber to determine the + * bit offset of the UMSK[] field in the L2C_SPAR register. + */ + field = (core & 0x3) * 8; + + /* + * Return the UMSK[] field from the appropriate L2C_SPAR + * register based on the coreNumber. + */ + + switch (core & 0xC) { + case 0x0: + return (cvmx_read_csr(CVMX_L2C_SPAR0) & (0xFF << field)) >> field; + case 0x4: + return (cvmx_read_csr(CVMX_L2C_SPAR1) & (0xFF << field)) >> field; + case 0x8: + return (cvmx_read_csr(CVMX_L2C_SPAR2) & (0xFF << field)) >> field; + case 0xC: + return (cvmx_read_csr(CVMX_L2C_SPAR3) & (0xFF << field)) >> field; + } + return 0; +} + +int cvmx_l2c_set_core_way_partition(uint32_t core, uint32_t mask) +{ + uint32_t field; + uint32_t valid_mask; + + valid_mask = (0x1 << cvmx_l2c_get_num_assoc()) - 1; + + mask &= valid_mask; + + /* A UMSK setting which blocks all L2C Ways is an error on some chips */ + if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) + return -1; + + /* Validate the core number */ + if (core >= cvmx_octeon_num_cores()) + return -1; + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + cvmx_write_csr(CVMX_L2C_WPAR_PPX(core), mask); + return 0; + } + + /* + * Use the lower two bits of core to determine the bit offset of the + * UMSK[] field in the L2C_SPAR register. + */ + field = (core & 0x3) * 8; + + /* + * Assign the new mask setting to the UMSK[] field in the appropriate + * L2C_SPAR register based on the core_num. + * + */ + switch (core & 0xC) { + case 0x0: + cvmx_write_csr(CVMX_L2C_SPAR0, + (cvmx_read_csr(CVMX_L2C_SPAR0) & ~(0xFF << field)) | + mask << field); + break; + case 0x4: + cvmx_write_csr(CVMX_L2C_SPAR1, + (cvmx_read_csr(CVMX_L2C_SPAR1) & ~(0xFF << field)) | + mask << field); + break; + case 0x8: + cvmx_write_csr(CVMX_L2C_SPAR2, + (cvmx_read_csr(CVMX_L2C_SPAR2) & ~(0xFF << field)) | + mask << field); + break; + case 0xC: + cvmx_write_csr(CVMX_L2C_SPAR3, + (cvmx_read_csr(CVMX_L2C_SPAR3) & ~(0xFF << field)) | + mask << field); + break; + } + return 0; +} + +int cvmx_l2c_set_hw_way_partition(uint32_t mask) +{ + uint32_t valid_mask; + + valid_mask = (0x1 << cvmx_l2c_get_num_assoc()) - 1; + mask &= valid_mask; + + /* A UMSK setting which blocks all L2C Ways is an error on some chips */ + if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) + return -1; + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + cvmx_write_csr(CVMX_L2C_WPAR_IOBX(0), mask); + else + cvmx_write_csr(CVMX_L2C_SPAR4, + (cvmx_read_csr(CVMX_L2C_SPAR4) & ~0xFF) | mask); + return 0; +} + +int cvmx_l2c_get_hw_way_partition(void) +{ + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + return cvmx_read_csr(CVMX_L2C_WPAR_IOBX(0)) & 0xffff; + else + return cvmx_read_csr(CVMX_L2C_SPAR4) & (0xFF); +} + +void cvmx_l2c_config_perf(uint32_t counter, enum cvmx_l2c_event event, + uint32_t clear_on_read) +{ + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + union cvmx_l2c_pfctl pfctl; + + pfctl.u64 = cvmx_read_csr(CVMX_L2C_PFCTL); + + switch (counter) { + case 0: + pfctl.s.cnt0sel = event; + pfctl.s.cnt0ena = 1; + pfctl.s.cnt0rdclr = clear_on_read; + break; + case 1: + pfctl.s.cnt1sel = event; + pfctl.s.cnt1ena = 1; + pfctl.s.cnt1rdclr = clear_on_read; + break; + case 2: + pfctl.s.cnt2sel = event; + pfctl.s.cnt2ena = 1; + pfctl.s.cnt2rdclr = clear_on_read; + break; + case 3: + default: + pfctl.s.cnt3sel = event; + pfctl.s.cnt3ena = 1; + pfctl.s.cnt3rdclr = clear_on_read; + break; + } + + cvmx_write_csr(CVMX_L2C_PFCTL, pfctl.u64); + } else { + union cvmx_l2c_tadx_prf l2c_tadx_prf; + int tad; + + cvmx_dprintf("L2C performance counter events are different for this chip, mapping 'event' to cvmx_l2c_tad_event_t\n"); + if (clear_on_read) + cvmx_dprintf("L2C counters don't support clear on read for this chip\n"); + + l2c_tadx_prf.u64 = cvmx_read_csr(CVMX_L2C_TADX_PRF(0)); + + switch (counter) { + case 0: + l2c_tadx_prf.s.cnt0sel = event; + break; + case 1: + l2c_tadx_prf.s.cnt1sel = event; + break; + case 2: + l2c_tadx_prf.s.cnt2sel = event; + break; + default: + case 3: + l2c_tadx_prf.s.cnt3sel = event; + break; + } + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + cvmx_write_csr(CVMX_L2C_TADX_PRF(tad), + l2c_tadx_prf.u64); + } +} + +uint64_t cvmx_l2c_read_perf(uint32_t counter) +{ + switch (counter) { + case 0: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC0); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC0(tad)); + return counter; + } + case 1: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC1); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC1(tad)); + return counter; + } + case 2: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC2); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC2(tad)); + return counter; + } + case 3: + default: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC3); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC3(tad)); + return counter; + } + } +} + +/** + * @INTERNAL + * Helper function use to fault in cache lines for L2 cache locking + * + * @addr: Address of base of memory region to read into L2 cache + * @len: Length (in bytes) of region to fault in + */ +static void fault_in(uint64_t addr, int len) +{ + char *ptr; + + /* + * Adjust addr and length so we get all cache lines even for + * small ranges spanning two cache lines. + */ + len += addr & CVMX_CACHE_LINE_MASK; + addr &= ~CVMX_CACHE_LINE_MASK; + ptr = cvmx_phys_to_ptr(addr); + /* + * Invalidate L1 cache to make sure all loads result in data + * being in L2. + */ + CVMX_DCACHE_INVALIDATE; + while (len > 0) { + READ_ONCE(*ptr); + len -= CVMX_CACHE_LINE_SIZE; + ptr += CVMX_CACHE_LINE_SIZE; + } +} + +int cvmx_l2c_lock_line(uint64_t addr) +{ + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + int shift = CVMX_L2C_TAG_ADDR_ALIAS_SHIFT; + uint64_t assoc = cvmx_l2c_get_num_assoc(); + uint64_t tag = addr >> shift; + uint64_t index = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, cvmx_l2c_address_to_index(addr) << CVMX_L2C_IDX_ADDR_SHIFT); + uint64_t way; + union cvmx_l2c_tadx_tag l2c_tadx_tag; + + CVMX_CACHE_LCKL2(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, addr), 0); + + /* Make sure we were able to lock the line */ + for (way = 0; way < assoc; way++) { + CVMX_CACHE_LTGL2I(index | (way << shift), 0); + /* make sure CVMX_L2C_TADX_TAG is updated */ + CVMX_SYNC; + l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0)); + if (l2c_tadx_tag.s.valid && l2c_tadx_tag.s.tag == tag) + break; + } + + /* Check if a valid line is found */ + if (way >= assoc) { + /* cvmx_dprintf("ERROR: cvmx_l2c_lock_line: line not found for locking at 0x%llx address\n", (unsigned long long)addr); */ + return -1; + } + + /* Check if lock bit is not set */ + if (!l2c_tadx_tag.s.lock) { + /* cvmx_dprintf("ERROR: cvmx_l2c_lock_line: Not able to lock at 0x%llx address\n", (unsigned long long)addr); */ + return -1; + } + return way; + } else { + int retval = 0; + union cvmx_l2c_dbg l2cdbg; + union cvmx_l2c_lckbase lckbase; + union cvmx_l2c_lckoff lckoff; + union cvmx_l2t_err l2t_err; + + cvmx_spinlock_lock(&cvmx_l2c_spinlock); + + l2cdbg.u64 = 0; + lckbase.u64 = 0; + lckoff.u64 = 0; + + /* Clear l2t error bits if set */ + l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR); + l2t_err.s.lckerr = 1; + l2t_err.s.lckerr2 = 1; + cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64); + + addr &= ~CVMX_CACHE_LINE_MASK; + + /* Set this core as debug core */ + l2cdbg.s.ppnum = cvmx_get_core_num(); + CVMX_SYNC; + cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64); + cvmx_read_csr(CVMX_L2C_DBG); + + lckoff.s.lck_offset = 0; /* Only lock 1 line at a time */ + cvmx_write_csr(CVMX_L2C_LCKOFF, lckoff.u64); + cvmx_read_csr(CVMX_L2C_LCKOFF); + + if (((union cvmx_l2c_cfg)(cvmx_read_csr(CVMX_L2C_CFG))).s.idxalias) { + int alias_shift = CVMX_L2C_IDX_ADDR_SHIFT + 2 * CVMX_L2_SET_BITS - 1; + uint64_t addr_tmp = addr ^ (addr & ((1 << alias_shift) - 1)) >> CVMX_L2_SET_BITS; + + lckbase.s.lck_base = addr_tmp >> 7; + + } else { + lckbase.s.lck_base = addr >> 7; + } + + lckbase.s.lck_ena = 1; + cvmx_write_csr(CVMX_L2C_LCKBASE, lckbase.u64); + /* Make sure it gets there */ + cvmx_read_csr(CVMX_L2C_LCKBASE); + + fault_in(addr, CVMX_CACHE_LINE_SIZE); + + lckbase.s.lck_ena = 0; + cvmx_write_csr(CVMX_L2C_LCKBASE, lckbase.u64); + /* Make sure it gets there */ + cvmx_read_csr(CVMX_L2C_LCKBASE); + + /* Stop being debug core */ + cvmx_write_csr(CVMX_L2C_DBG, 0); + cvmx_read_csr(CVMX_L2C_DBG); + + l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR); + if (l2t_err.s.lckerr || l2t_err.s.lckerr2) + retval = 1; /* We were unable to lock the line */ + + cvmx_spinlock_unlock(&cvmx_l2c_spinlock); + return retval; + } +} + +int cvmx_l2c_lock_mem_region(uint64_t start, uint64_t len) +{ + int retval = 0; + + /* Round start/end to cache line boundaries */ + len += start & CVMX_CACHE_LINE_MASK; + start &= ~CVMX_CACHE_LINE_MASK; + len = (len + CVMX_CACHE_LINE_MASK) & ~CVMX_CACHE_LINE_MASK; + + while (len) { + retval += cvmx_l2c_lock_line(start); + start += CVMX_CACHE_LINE_SIZE; + len -= CVMX_CACHE_LINE_SIZE; + } + return retval; +} + +void cvmx_l2c_flush(void) +{ + uint64_t assoc, set; + uint64_t n_assoc, n_set; + + n_set = cvmx_l2c_get_num_sets(); + n_assoc = cvmx_l2c_get_num_assoc(); + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + uint64_t address; + /* These may look like constants, but they aren't... */ + int assoc_shift = CVMX_L2C_TAG_ADDR_ALIAS_SHIFT; + int set_shift = CVMX_L2C_IDX_ADDR_SHIFT; + + for (set = 0; set < n_set; set++) { + for (assoc = 0; assoc < n_assoc; assoc++) { + address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + (assoc << assoc_shift) | (set << set_shift)); + CVMX_CACHE_WBIL2I(address, 0); + } + } + } else { + for (set = 0; set < n_set; set++) + for (assoc = 0; assoc < n_assoc; assoc++) + cvmx_l2c_flush_line(assoc, set); + } +} + + +int cvmx_l2c_unlock_line(uint64_t address) +{ + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + int assoc; + union cvmx_l2c_tag tag; + uint32_t tag_addr; + uint32_t index = cvmx_l2c_address_to_index(address); + + tag_addr = ((address >> CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) & ((1 << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) - 1)); + + /* + * For 63XX, we can flush a line by using the physical + * address directly, so finding the cache line used by + * the address is only required to provide the proper + * return value for the function. + */ + for (assoc = 0; assoc < CVMX_L2_ASSOC; assoc++) { + tag = cvmx_l2c_get_tag(assoc, index); + + if (tag.s.V && (tag.s.addr == tag_addr)) { + CVMX_CACHE_WBIL2(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, address), 0); + return tag.s.L; + } + } + } else { + int assoc; + union cvmx_l2c_tag tag; + uint32_t tag_addr; + + uint32_t index = cvmx_l2c_address_to_index(address); + + /* Compute portion of address that is stored in tag */ + tag_addr = ((address >> CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) & ((1 << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) - 1)); + for (assoc = 0; assoc < CVMX_L2_ASSOC; assoc++) { + tag = cvmx_l2c_get_tag(assoc, index); + + if (tag.s.V && (tag.s.addr == tag_addr)) { + cvmx_l2c_flush_line(assoc, index); + return tag.s.L; + } + } + } + return 0; +} + +int cvmx_l2c_unlock_mem_region(uint64_t start, uint64_t len) +{ + int num_unlocked = 0; + /* Round start/end to cache line boundaries */ + len += start & CVMX_CACHE_LINE_MASK; + start &= ~CVMX_CACHE_LINE_MASK; + len = (len + CVMX_CACHE_LINE_MASK) & ~CVMX_CACHE_LINE_MASK; + while (len > 0) { + num_unlocked += cvmx_l2c_unlock_line(start); + start += CVMX_CACHE_LINE_SIZE; + len -= CVMX_CACHE_LINE_SIZE; + } + + return num_unlocked; +} + +/* + * Internal l2c tag types. These are converted to a generic structure + * that can be used on all chips. + */ +union __cvmx_l2c_tag { + uint64_t u64; + struct cvmx_l2c_tag_cn50xx { + __BITFIELD_FIELD(uint64_t reserved:40, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:20, /* Phys addr (33..14) */ + ;)))))) + } cn50xx; + struct cvmx_l2c_tag_cn30xx { + __BITFIELD_FIELD(uint64_t reserved:41, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:19, /* Phys addr (33..15) */ + ;)))))) + } cn30xx; + struct cvmx_l2c_tag_cn31xx { + __BITFIELD_FIELD(uint64_t reserved:42, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:18, /* Phys addr (33..16) */ + ;)))))) + } cn31xx; + struct cvmx_l2c_tag_cn38xx { + __BITFIELD_FIELD(uint64_t reserved:43, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:17, /* Phys addr (33..17) */ + ;)))))) + } cn38xx; + struct cvmx_l2c_tag_cn58xx { + __BITFIELD_FIELD(uint64_t reserved:44, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:16, /* Phys addr (33..18) */ + ;)))))) + } cn58xx; + struct cvmx_l2c_tag_cn58xx cn56xx; /* 2048 sets */ + struct cvmx_l2c_tag_cn31xx cn52xx; /* 512 sets */ +}; + + +/** + * @INTERNAL + * Function to read a L2C tag. This code make the current core + * the 'debug core' for the L2. This code must only be executed by + * 1 core at a time. + * + * @assoc: Association (way) of the tag to dump + * @index: Index of the cacheline + * + * Returns The Octeon model specific tag structure. This is + * translated by a wrapper function to a generic form that is + * easier for applications to use. + */ +static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) +{ + + uint64_t debug_tag_addr = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, (index << 7) + 96); + uint64_t core = cvmx_get_core_num(); + union __cvmx_l2c_tag tag_val; + uint64_t dbg_addr = CVMX_L2C_DBG; + unsigned long flags; + union cvmx_l2c_dbg debug_val; + + debug_val.u64 = 0; + /* + * For low core count parts, the core number is always small + * enough to stay in the correct field and not set any + * reserved bits. + */ + debug_val.s.ppnum = core; + debug_val.s.l2t = 1; + debug_val.s.set = assoc; + + local_irq_save(flags); + /* + * Make sure core is quiet (no prefetches, etc.) before + * entering debug mode. + */ + CVMX_SYNC; + /* Flush L1 to make sure debug load misses L1 */ + CVMX_DCACHE_INVALIDATE; + + /* + * The following must be done in assembly as when in debug + * mode all data loads from L2 return special debug data, not + * normal memory contents. Also, interrupts must be disabled, + * since if an interrupt occurs while in debug mode the ISR + * will get debug data from all its memory * reads instead of + * the contents of memory. + */ + + asm volatile ( + ".set push\n\t" + ".set mips64\n\t" + ".set noreorder\n\t" + "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ + "ld $0, 0(%[dbg_addr])\n\t" + "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ + "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ + "ld $0, 0(%[dbg_addr])\n\t" + "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ + ".set pop" + : [tag_val] "=r" (tag_val) + : [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr) + : "memory"); + + local_irq_restore(flags); + + return tag_val; +} + + +union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) +{ + union cvmx_l2c_tag tag; + + tag.u64 = 0; + if ((int)association >= cvmx_l2c_get_num_assoc()) { + cvmx_dprintf("ERROR: cvmx_l2c_get_tag association out of range\n"); + return tag; + } + if ((int)index >= cvmx_l2c_get_num_sets()) { + cvmx_dprintf("ERROR: cvmx_l2c_get_tag index out of range (arg: %d, max: %d)\n", + (int)index, cvmx_l2c_get_num_sets()); + return tag; + } + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + union cvmx_l2c_tadx_tag l2c_tadx_tag; + uint64_t address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + (association << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) | + (index << CVMX_L2C_IDX_ADDR_SHIFT)); + /* + * Use L2 cache Index load tag cache instruction, as + * hardware loads the virtual tag for the L2 cache + * block with the contents of L2C_TAD0_TAG + * register. + */ + CVMX_CACHE_LTGL2I(address, 0); + CVMX_SYNC; /* make sure CVMX_L2C_TADX_TAG is updated */ + l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0)); + + tag.s.V = l2c_tadx_tag.s.valid; + tag.s.D = l2c_tadx_tag.s.dirty; + tag.s.L = l2c_tadx_tag.s.lock; + tag.s.U = l2c_tadx_tag.s.use; + tag.s.addr = l2c_tadx_tag.s.tag; + } else { + union __cvmx_l2c_tag tmp_tag; + /* __read_l2_tag is intended for internal use only */ + tmp_tag = __read_l2_tag(association, index); + + /* + * Convert all tag structure types to generic version, + * as it can represent all models. + */ + if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) { + tag.s.V = tmp_tag.cn58xx.V; + tag.s.D = tmp_tag.cn58xx.D; + tag.s.L = tmp_tag.cn58xx.L; + tag.s.U = tmp_tag.cn58xx.U; + tag.s.addr = tmp_tag.cn58xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + tag.s.V = tmp_tag.cn38xx.V; + tag.s.D = tmp_tag.cn38xx.D; + tag.s.L = tmp_tag.cn38xx.L; + tag.s.U = tmp_tag.cn38xx.U; + tag.s.addr = tmp_tag.cn38xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + tag.s.V = tmp_tag.cn31xx.V; + tag.s.D = tmp_tag.cn31xx.D; + tag.s.L = tmp_tag.cn31xx.L; + tag.s.U = tmp_tag.cn31xx.U; + tag.s.addr = tmp_tag.cn31xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { + tag.s.V = tmp_tag.cn30xx.V; + tag.s.D = tmp_tag.cn30xx.D; + tag.s.L = tmp_tag.cn30xx.L; + tag.s.U = tmp_tag.cn30xx.U; + tag.s.addr = tmp_tag.cn30xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { + tag.s.V = tmp_tag.cn50xx.V; + tag.s.D = tmp_tag.cn50xx.D; + tag.s.L = tmp_tag.cn50xx.L; + tag.s.U = tmp_tag.cn50xx.U; + tag.s.addr = tmp_tag.cn50xx.addr; + } else { + cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); + } + } + return tag; +} + +uint32_t cvmx_l2c_address_to_index(uint64_t addr) +{ + uint64_t idx = addr >> CVMX_L2C_IDX_ADDR_SHIFT; + int indxalias = 0; + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + union cvmx_l2c_ctl l2c_ctl; + + l2c_ctl.u64 = cvmx_read_csr(CVMX_L2C_CTL); + indxalias = !l2c_ctl.s.disidxalias; + } else { + union cvmx_l2c_cfg l2c_cfg; + + l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG); + indxalias = l2c_cfg.s.idxalias; + } + + if (indxalias) { + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + uint32_t a_14_12 = (idx / (CVMX_L2C_MEMBANK_SELECT_SIZE/(1<<CVMX_L2C_IDX_ADDR_SHIFT))) & 0x7; + + idx ^= idx / cvmx_l2c_get_num_sets(); + idx ^= a_14_12; + } else { + idx ^= ((addr & CVMX_L2C_ALIAS_MASK) >> CVMX_L2C_TAG_ADDR_ALIAS_SHIFT); + } + } + idx &= CVMX_L2C_IDX_MASK; + return idx; +} + +int cvmx_l2c_get_cache_size_bytes(void) +{ + return cvmx_l2c_get_num_sets() * cvmx_l2c_get_num_assoc() * + CVMX_CACHE_LINE_SIZE; +} + +/** + * Return log base 2 of the number of sets in the L2 cache + * Returns + */ +int cvmx_l2c_get_set_bits(void) +{ + int l2_set_bits; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)) + l2_set_bits = 11; /* 2048 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN63XX)) + l2_set_bits = 10; /* 1024 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) + l2_set_bits = 9; /* 512 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) + l2_set_bits = 8; /* 256 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) + l2_set_bits = 7; /* 128 sets */ + else { + cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); + l2_set_bits = 11; /* 2048 sets */ + } + return l2_set_bits; +} + +/* Return the number of sets in the L2 Cache */ +int cvmx_l2c_get_num_sets(void) +{ + return 1 << cvmx_l2c_get_set_bits(); +} + +/* Return the number of associations in the L2 Cache */ +int cvmx_l2c_get_num_assoc(void) +{ + int l2_assoc; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || + OCTEON_IS_MODEL(OCTEON_CN52XX) || + OCTEON_IS_MODEL(OCTEON_CN58XX) || + OCTEON_IS_MODEL(OCTEON_CN50XX) || + OCTEON_IS_MODEL(OCTEON_CN38XX)) + l2_assoc = 8; + else if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + l2_assoc = 16; + else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || + OCTEON_IS_MODEL(OCTEON_CN30XX)) + l2_assoc = 4; + else { + cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); + l2_assoc = 8; + } + + /* Check to see if part of the cache is disabled */ + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + union cvmx_mio_fus_dat3 mio_fus_dat3; + + mio_fus_dat3.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT3); + /* + * cvmx_mio_fus_dat3.s.l2c_crip fuses map as follows + * <2> will be not used for 63xx + * <1> disables 1/2 ways + * <0> disables 1/4 ways + * They are cumulative, so for 63xx: + * <1> <0> + * 0 0 16-way 2MB cache + * 0 1 12-way 1.5MB cache + * 1 0 8-way 1MB cache + * 1 1 4-way 512KB cache + */ + + if (mio_fus_dat3.s.l2c_crip == 3) + l2_assoc = 4; + else if (mio_fus_dat3.s.l2c_crip == 2) + l2_assoc = 8; + else if (mio_fus_dat3.s.l2c_crip == 1) + l2_assoc = 12; + } else { + uint64_t l2d_fus3; + + l2d_fus3 = cvmx_read_csr(CVMX_L2D_FUS3); + /* + * Using shifts here, as bit position names are + * different for each model but they all mean the + * same. + */ + if ((l2d_fus3 >> 35) & 0x1) + l2_assoc = l2_assoc >> 2; + else if ((l2d_fus3 >> 34) & 0x1) + l2_assoc = l2_assoc >> 1; + } + return l2_assoc; +} + +/** + * Flush a line from the L2 cache + * This should only be called from one core at a time, as this routine + * sets the core to the 'debug' core in order to flush the line. + * + * @assoc: Association (or way) to flush + * @index: Index to flush + */ +void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index) +{ + /* Check the range of the index. */ + if (index > (uint32_t)cvmx_l2c_get_num_sets()) { + cvmx_dprintf("ERROR: cvmx_l2c_flush_line index out of range.\n"); + return; + } + + /* Check the range of association. */ + if (assoc > (uint32_t)cvmx_l2c_get_num_assoc()) { + cvmx_dprintf("ERROR: cvmx_l2c_flush_line association out of range.\n"); + return; + } + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + uint64_t address; + /* Create the address based on index and association. + * Bits<20:17> select the way of the cache block involved in + * the operation + * Bits<16:7> of the effect address select the index + */ + address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + (assoc << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) | + (index << CVMX_L2C_IDX_ADDR_SHIFT)); + CVMX_CACHE_WBIL2I(address, 0); + } else { + union cvmx_l2c_dbg l2cdbg; + + l2cdbg.u64 = 0; + if (!OCTEON_IS_MODEL(OCTEON_CN30XX)) + l2cdbg.s.ppnum = cvmx_get_core_num(); + l2cdbg.s.finv = 1; + + l2cdbg.s.set = assoc; + cvmx_spinlock_lock(&cvmx_l2c_spinlock); + /* + * Enter debug mode, and make sure all other writes + * complete before we enter debug mode + */ + CVMX_SYNC; + cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64); + cvmx_read_csr(CVMX_L2C_DBG); + + CVMX_PREPARE_FOR_STORE(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + index * CVMX_CACHE_LINE_SIZE), + 0); + /* Exit debug mode */ + CVMX_SYNC; + cvmx_write_csr(CVMX_L2C_DBG, 0); + cvmx_read_csr(CVMX_L2C_DBG); + cvmx_spinlock_unlock(&cvmx_l2c_spinlock); + } +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c new file mode 100644 index 000000000..676fab50d --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c @@ -0,0 +1,646 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Support library for the hardware Packet Output unit. + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-helper.h> + +/** + * Internal state of packet output + */ + +static int __cvmx_pko_int(int interface, int index) +{ + switch (interface) { + case 0: + return index; + case 1: + return 4; + case 2: + return index + 0x08; + case 3: + return index + 0x0c; + case 4: + return index + 0x10; + case 5: + return 0x1c; + case 6: + return 0x1d; + case 7: + return 0x1e; + case 8: + return 0x1f; + default: + return -1; + } +} + +static void __cvmx_pko_iport_config(int pko_port) +{ + int queue; + const int num_queues = 1; + const int base_queue = pko_port; + const int static_priority_end = 1; + const int static_priority_base = 1; + + for (queue = 0; queue < num_queues; queue++) { + union cvmx_pko_mem_iqueue_ptrs config; + cvmx_cmd_queue_result_t cmd_res; + uint64_t *buf_ptr; + + config.u64 = 0; + config.s.index = queue; + config.s.qid = base_queue + queue; + config.s.ipid = pko_port; + config.s.tail = (queue == (num_queues - 1)); + config.s.s_tail = (queue == static_priority_end); + config.s.static_p = (static_priority_base >= 0); + config.s.static_q = (queue <= static_priority_end); + config.s.qos_mask = 0xff; + + cmd_res = cvmx_cmd_queue_initialize( + CVMX_CMD_QUEUE_PKO(base_queue + queue), + CVMX_PKO_MAX_QUEUE_DEPTH, + CVMX_FPA_OUTPUT_BUFFER_POOL, + (CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE - + CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST * 8)); + + WARN(cmd_res, + "%s: cmd_res=%d pko_port=%d base_queue=%d num_queues=%d queue=%d\n", + __func__, (int)cmd_res, pko_port, base_queue, + num_queues, queue); + + buf_ptr = (uint64_t *)cvmx_cmd_queue_buffer( + CVMX_CMD_QUEUE_PKO(base_queue + queue)); + config.s.buf_ptr = cvmx_ptr_to_phys(buf_ptr) >> 7; + CVMX_SYNCWS; + cvmx_write_csr(CVMX_PKO_MEM_IQUEUE_PTRS, config.u64); + } +} + +static void __cvmx_pko_queue_alloc_o68(void) +{ + int port; + + for (port = 0; port < 48; port++) + __cvmx_pko_iport_config(port); +} + +static void __cvmx_pko_port_map_o68(void) +{ + int port; + int interface, index; + cvmx_helper_interface_mode_t mode; + union cvmx_pko_mem_iport_ptrs config; + + /* + * Initialize every iport with the invalid eid. + */ + config.u64 = 0; + config.s.eid = 31; /* Invalid */ + for (port = 0; port < 128; port++) { + config.s.ipid = port; + cvmx_write_csr(CVMX_PKO_MEM_IPORT_PTRS, config.u64); + } + + /* + * Set up PKO_MEM_IPORT_PTRS + */ + for (port = 0; port < 48; port++) { + interface = cvmx_helper_get_interface_num(port); + index = cvmx_helper_get_interface_index_num(port); + mode = cvmx_helper_interface_get_mode(interface); + if (mode == CVMX_HELPER_INTERFACE_MODE_DISABLED) + continue; + + config.s.ipid = port; + config.s.qos_mask = 0xff; + config.s.crc = 1; + config.s.min_pkt = 1; + config.s.intr = __cvmx_pko_int(interface, index); + config.s.eid = config.s.intr; + config.s.pipe = (mode == CVMX_HELPER_INTERFACE_MODE_LOOP) ? + index : port; + cvmx_write_csr(CVMX_PKO_MEM_IPORT_PTRS, config.u64); + } +} + +static void __cvmx_pko_chip_init(void) +{ + int i; + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { + __cvmx_pko_port_map_o68(); + __cvmx_pko_queue_alloc_o68(); + return; + } + + /* + * Initialize queues + */ + for (i = 0; i < CVMX_PKO_MAX_OUTPUT_QUEUES; i++) { + const uint64_t priority = 8; + + cvmx_pko_config_port(CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID, i, 1, + &priority); + } +} + +/** + * Call before any other calls to initialize the packet + * output system. This does chip global config, and should only be + * done by one core. + */ + +void cvmx_pko_initialize_global(void) +{ + union cvmx_pko_reg_cmd_buf config; + + /* + * Set the size of the PKO command buffers to an odd number of + * 64bit words. This allows the normal two word send to stay + * aligned and never span a command word buffer. + */ + config.u64 = 0; + config.s.pool = CVMX_FPA_OUTPUT_BUFFER_POOL; + config.s.size = CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE / 8 - 1; + + cvmx_write_csr(CVMX_PKO_REG_CMD_BUF, config.u64); + + /* + * Chip-specific setup. + */ + __cvmx_pko_chip_init(); + + /* + * If we aren't using all of the queues optimize PKO's + * internal memory. + */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX) + || OCTEON_IS_MODEL(OCTEON_CN56XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + int num_interfaces = cvmx_helper_get_number_of_interfaces(); + int last_port = + cvmx_helper_get_last_ipd_port(num_interfaces - 1); + int max_queues = + cvmx_pko_get_base_queue(last_port) + + cvmx_pko_get_num_queues(last_port); + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + if (max_queues <= 32) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 2); + else if (max_queues <= 64) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 1); + } else { + if (max_queues <= 64) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 2); + else if (max_queues <= 128) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 1); + } + } +} + +/** + * This function does per-core initialization required by the PKO routines. + * This must be called on all cores that will do packet output, and must + * be called after the FPA has been initialized and filled with pages. + * + * Returns 0 on success + * !0 on failure + */ +int cvmx_pko_initialize_local(void) +{ + /* Nothing to do */ + return 0; +} + +/** + * Enables the packet output hardware. It must already be + * configured. + */ +void cvmx_pko_enable(void) +{ + union cvmx_pko_reg_flags flags; + + flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); + if (flags.s.ena_pko) + cvmx_dprintf + ("Warning: Enabling PKO when PKO already enabled.\n"); + + flags.s.ena_dwb = 1; + flags.s.ena_pko = 1; + /* + * always enable big endian for 3-word command. Does nothing + * for 2-word. + */ + flags.s.store_be = 1; + cvmx_write_csr(CVMX_PKO_REG_FLAGS, flags.u64); +} + +/** + * Disables the packet output. Does not affect any configuration. + */ +void cvmx_pko_disable(void) +{ + union cvmx_pko_reg_flags pko_reg_flags; + pko_reg_flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); + pko_reg_flags.s.ena_pko = 0; + cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64); +} +EXPORT_SYMBOL_GPL(cvmx_pko_disable); + +/** + * Reset the packet output. + */ +static void __cvmx_pko_reset(void) +{ + union cvmx_pko_reg_flags pko_reg_flags; + pko_reg_flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); + pko_reg_flags.s.reset = 1; + cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64); +} + +/** + * Shutdown and free resources required by packet output. + */ +void cvmx_pko_shutdown(void) +{ + union cvmx_pko_mem_queue_ptrs config; + int queue; + + cvmx_pko_disable(); + + for (queue = 0; queue < CVMX_PKO_MAX_OUTPUT_QUEUES; queue++) { + config.u64 = 0; + config.s.tail = 1; + config.s.index = 0; + config.s.port = CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID; + config.s.queue = queue & 0x7f; + config.s.qos_mask = 0; + config.s.buf_ptr = 0; + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + union cvmx_pko_reg_queue_ptrs1 config1; + config1.u64 = 0; + config1.s.qid7 = queue >> 7; + cvmx_write_csr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64); + } + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64); + cvmx_cmd_queue_shutdown(CVMX_CMD_QUEUE_PKO(queue)); + } + __cvmx_pko_reset(); +} +EXPORT_SYMBOL_GPL(cvmx_pko_shutdown); + +/** + * Configure a output port and the associated queues for use. + * + * @port: Port to configure. + * @base_queue: First queue number to associate with this port. + * @num_queues: Number of queues to associate with this port + * @priority: Array of priority levels for each queue. Values are + * allowed to be 0-8. A value of 8 get 8 times the traffic + * of a value of 1. A value of 0 indicates that no rounds + * will be participated in. These priorities can be changed + * on the fly while the pko is enabled. A priority of 9 + * indicates that static priority should be used. If static + * priority is used all queues with static priority must be + * contiguous starting at the base_queue, and lower numbered + * queues have higher priority than higher numbered queues. + * There must be num_queues elements in the array. + */ +cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, + uint64_t num_queues, + const uint64_t priority[]) +{ + cvmx_pko_status_t result_code; + uint64_t queue; + union cvmx_pko_mem_queue_ptrs config; + union cvmx_pko_reg_queue_ptrs1 config1; + int static_priority_base = -1; + int static_priority_end = -1; + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + return CVMX_PKO_SUCCESS; + + if ((port >= CVMX_PKO_NUM_OUTPUT_PORTS) + && (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID)) { + cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid port %llu\n", + (unsigned long long)port); + return CVMX_PKO_INVALID_PORT; + } + + if (base_queue + num_queues > CVMX_PKO_MAX_OUTPUT_QUEUES) { + cvmx_dprintf + ("ERROR: cvmx_pko_config_port: Invalid queue range %llu\n", + (unsigned long long)(base_queue + num_queues)); + return CVMX_PKO_INVALID_QUEUE; + } + + if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) { + /* + * Validate the static queue priority setup and set + * static_priority_base and static_priority_end + * accordingly. + */ + for (queue = 0; queue < num_queues; queue++) { + /* Find first queue of static priority */ + if (static_priority_base == -1 + && priority[queue] == + CVMX_PKO_QUEUE_STATIC_PRIORITY) + static_priority_base = queue; + /* Find last queue of static priority */ + if (static_priority_base != -1 + && static_priority_end == -1 + && priority[queue] != CVMX_PKO_QUEUE_STATIC_PRIORITY + && queue) + static_priority_end = queue - 1; + else if (static_priority_base != -1 + && static_priority_end == -1 + && queue == num_queues - 1) + /* all queues are static priority */ + static_priority_end = queue; + /* + * Check to make sure all static priority + * queues are contiguous. Also catches some + * cases of static priorites not starting at + * queue 0. + */ + if (static_priority_end != -1 + && (int)queue > static_priority_end + && priority[queue] == + CVMX_PKO_QUEUE_STATIC_PRIORITY) { + cvmx_dprintf("ERROR: cvmx_pko_config_port: " + "Static priority queues aren't " + "contiguous or don't start at " + "base queue. q: %d, eq: %d\n", + (int)queue, static_priority_end); + return CVMX_PKO_INVALID_PRIORITY; + } + } + if (static_priority_base > 0) { + cvmx_dprintf("ERROR: cvmx_pko_config_port: Static " + "priority queues don't start at base " + "queue. sq: %d\n", + static_priority_base); + return CVMX_PKO_INVALID_PRIORITY; + } +#if 0 + cvmx_dprintf("Port %d: Static priority queue base: %d, " + "end: %d\n", port, + static_priority_base, static_priority_end); +#endif + } + /* + * At this point, static_priority_base and static_priority_end + * are either both -1, or are valid start/end queue + * numbers. + */ + + result_code = CVMX_PKO_SUCCESS; + +#ifdef PKO_DEBUG + cvmx_dprintf("num queues: %d (%lld,%lld)\n", num_queues, + CVMX_PKO_QUEUES_PER_PORT_INTERFACE0, + CVMX_PKO_QUEUES_PER_PORT_INTERFACE1); +#endif + + for (queue = 0; queue < num_queues; queue++) { + uint64_t *buf_ptr = NULL; + + config1.u64 = 0; + config1.s.idx3 = queue >> 3; + config1.s.qid7 = (base_queue + queue) >> 7; + + config.u64 = 0; + config.s.tail = queue == (num_queues - 1); + config.s.index = queue; + config.s.port = port; + config.s.queue = base_queue + queue; + + if (!cvmx_octeon_is_pass1()) { + config.s.static_p = static_priority_base >= 0; + config.s.static_q = (int)queue <= static_priority_end; + config.s.s_tail = (int)queue == static_priority_end; + } + /* + * Convert the priority into an enable bit field. Try + * to space the bits out evenly so the packet don't + * get grouped up + */ + switch ((int)priority[queue]) { + case 0: + config.s.qos_mask = 0x00; + break; + case 1: + config.s.qos_mask = 0x01; + break; + case 2: + config.s.qos_mask = 0x11; + break; + case 3: + config.s.qos_mask = 0x49; + break; + case 4: + config.s.qos_mask = 0x55; + break; + case 5: + config.s.qos_mask = 0x57; + break; + case 6: + config.s.qos_mask = 0x77; + break; + case 7: + config.s.qos_mask = 0x7f; + break; + case 8: + config.s.qos_mask = 0xff; + break; + case CVMX_PKO_QUEUE_STATIC_PRIORITY: + /* Pass 1 will fall through to the error case */ + if (!cvmx_octeon_is_pass1()) { + config.s.qos_mask = 0xff; + break; + } + default: + cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid " + "priority %llu\n", + (unsigned long long)priority[queue]); + config.s.qos_mask = 0xff; + result_code = CVMX_PKO_INVALID_PRIORITY; + break; + } + + if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) { + cvmx_cmd_queue_result_t cmd_res = + cvmx_cmd_queue_initialize(CVMX_CMD_QUEUE_PKO + (base_queue + queue), + CVMX_PKO_MAX_QUEUE_DEPTH, + CVMX_FPA_OUTPUT_BUFFER_POOL, + CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE + - + CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST + * 8); + if (cmd_res != CVMX_CMD_QUEUE_SUCCESS) { + switch (cmd_res) { + case CVMX_CMD_QUEUE_NO_MEMORY: + cvmx_dprintf("ERROR: " + "cvmx_pko_config_port: " + "Unable to allocate " + "output buffer.\n"); + return CVMX_PKO_NO_MEMORY; + case CVMX_CMD_QUEUE_ALREADY_SETUP: + cvmx_dprintf + ("ERROR: cvmx_pko_config_port: Port already setup.\n"); + return CVMX_PKO_PORT_ALREADY_SETUP; + case CVMX_CMD_QUEUE_INVALID_PARAM: + default: + cvmx_dprintf + ("ERROR: cvmx_pko_config_port: Command queue initialization failed.\n"); + return CVMX_PKO_CMD_QUEUE_INIT_ERROR; + } + } + + buf_ptr = + (uint64_t *) + cvmx_cmd_queue_buffer(CVMX_CMD_QUEUE_PKO + (base_queue + queue)); + config.s.buf_ptr = cvmx_ptr_to_phys(buf_ptr); + } else + config.s.buf_ptr = 0; + + CVMX_SYNCWS; + + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64); + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64); + } + + return result_code; +} + +#ifdef PKO_DEBUG +/** + * Show map of ports -> queues for different cores. + */ +void cvmx_pko_show_queue_map() +{ + int core, port; + int pko_output_ports = 36; + + cvmx_dprintf("port"); + for (port = 0; port < pko_output_ports; port++) + cvmx_dprintf("%3d ", port); + cvmx_dprintf("\n"); + + for (core = 0; core < CVMX_MAX_CORES; core++) { + cvmx_dprintf("\n%2d: ", core); + for (port = 0; port < pko_output_ports; port++) { + cvmx_dprintf("%3d ", + cvmx_pko_get_base_queue_per_core(port, + core)); + } + } + cvmx_dprintf("\n"); +} +#endif + +/** + * Rate limit a PKO port to a max packets/sec. This function is only + * supported on CN51XX and higher, excluding CN58XX. + * + * @port: Port to rate limit + * @packets_s: Maximum packet/sec + * @burst: Maximum number of packets to burst in a row before rate + * limiting cuts in. + * + * Returns Zero on success, negative on failure + */ +int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst) +{ + union cvmx_pko_mem_port_rate0 pko_mem_port_rate0; + union cvmx_pko_mem_port_rate1 pko_mem_port_rate1; + + pko_mem_port_rate0.u64 = 0; + pko_mem_port_rate0.s.pid = port; + pko_mem_port_rate0.s.rate_pkt = + cvmx_sysinfo_get()->cpu_clock_hz / packets_s / 16; + /* No cost per word since we are limited by packets/sec, not bits/sec */ + pko_mem_port_rate0.s.rate_word = 0; + + pko_mem_port_rate1.u64 = 0; + pko_mem_port_rate1.s.pid = port; + pko_mem_port_rate1.s.rate_lim = + ((uint64_t) pko_mem_port_rate0.s.rate_pkt * burst) >> 8; + + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE0, pko_mem_port_rate0.u64); + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE1, pko_mem_port_rate1.u64); + return 0; +} + +/** + * Rate limit a PKO port to a max bits/sec. This function is only + * supported on CN51XX and higher, excluding CN58XX. + * + * @port: Port to rate limit + * @bits_s: PKO rate limit in bits/sec + * @burst: Maximum number of bits to burst before rate + * limiting cuts in. + * + * Returns Zero on success, negative on failure + */ +int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst) +{ + union cvmx_pko_mem_port_rate0 pko_mem_port_rate0; + union cvmx_pko_mem_port_rate1 pko_mem_port_rate1; + uint64_t clock_rate = cvmx_sysinfo_get()->cpu_clock_hz; + uint64_t tokens_per_bit = clock_rate * 16 / bits_s; + + pko_mem_port_rate0.u64 = 0; + pko_mem_port_rate0.s.pid = port; + /* + * Each packet has a 12 bytes of interframe gap, an 8 byte + * preamble, and a 4 byte CRC. These are not included in the + * per word count. Multiply by 8 to covert to bits and divide + * by 256 for limit granularity. + */ + pko_mem_port_rate0.s.rate_pkt = (12 + 8 + 4) * 8 * tokens_per_bit / 256; + /* Each 8 byte word has 64bits */ + pko_mem_port_rate0.s.rate_word = 64 * tokens_per_bit; + + pko_mem_port_rate1.u64 = 0; + pko_mem_port_rate1.s.pid = port; + pko_mem_port_rate1.s.rate_lim = tokens_per_bit * burst / 256; + + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE0, pko_mem_port_rate0.u64); + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE1, pko_mem_port_rate1.u64); + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c new file mode 100644 index 000000000..f51957a3e --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c @@ -0,0 +1,668 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Support library for the SPI + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-spi.h> + +#include <asm/octeon/cvmx-spxx-defs.h> +#include <asm/octeon/cvmx-stxx-defs.h> +#include <asm/octeon/cvmx-srxx-defs.h> + +#define INVOKE_CB(function_p, args...) \ + do { \ + if (function_p) { \ + res = function_p(args); \ + if (res) \ + return res; \ + } \ + } while (0) + +#if CVMX_ENABLE_DEBUG_PRINTS +static const char *modes[] = + { "UNKNOWN", "TX Halfplex", "Rx Halfplex", "Duplex" }; +#endif + +/* Default callbacks, can be overridden + * using cvmx_spi_get_callbacks/cvmx_spi_set_callbacks + */ +static cvmx_spi_callbacks_t cvmx_spi_callbacks = { + .reset_cb = cvmx_spi_reset_cb, + .calendar_setup_cb = cvmx_spi_calendar_setup_cb, + .clock_detect_cb = cvmx_spi_clock_detect_cb, + .training_cb = cvmx_spi_training_cb, + .calendar_sync_cb = cvmx_spi_calendar_sync_cb, + .interface_up_cb = cvmx_spi_interface_up_cb +}; + +/** + * Get current SPI4 initialization callbacks + * + * @callbacks: Pointer to the callbacks structure.to fill + * + * Returns Pointer to cvmx_spi_callbacks_t structure. + */ +void cvmx_spi_get_callbacks(cvmx_spi_callbacks_t *callbacks) +{ + memcpy(callbacks, &cvmx_spi_callbacks, sizeof(cvmx_spi_callbacks)); +} + +/** + * Set new SPI4 initialization callbacks + * + * @new_callbacks: Pointer to an updated callbacks structure. + */ +void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks) +{ + memcpy(&cvmx_spi_callbacks, new_callbacks, sizeof(cvmx_spi_callbacks)); +} + +/** + * Initialize and start the SPI interface. + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * @num_ports: Number of SPI ports to configure + * + * Returns Zero on success, negative of failure. + */ +int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout, + int num_ports) +{ + int res = -1; + + if (!(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX))) + return res; + + /* Callback to perform SPI4 reset */ + INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode); + + /* Callback to perform calendar setup */ + INVOKE_CB(cvmx_spi_callbacks.calendar_setup_cb, interface, mode, + num_ports); + + /* Callback to perform clock detection */ + INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout); + + /* Callback to perform SPI4 link training */ + INVOKE_CB(cvmx_spi_callbacks.training_cb, interface, mode, timeout); + + /* Callback to perform calendar sync */ + INVOKE_CB(cvmx_spi_callbacks.calendar_sync_cb, interface, mode, + timeout); + + /* Callback to handle interface coming up */ + INVOKE_CB(cvmx_spi_callbacks.interface_up_cb, interface, mode); + + return res; +} + +/** + * This routine restarts the SPI interface after it has lost synchronization + * with its correspondent system. + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * + * Returns Zero on success, negative of failure. + */ +int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) +{ + int res = -1; + + if (!(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX))) + return res; + + cvmx_dprintf("SPI%d: Restart %s\n", interface, modes[mode]); + + /* Callback to perform SPI4 reset */ + INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode); + + /* NOTE: Calendar setup is not performed during restart */ + /* Refer to cvmx_spi_start_interface() for the full sequence */ + + /* Callback to perform clock detection */ + INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout); + + /* Callback to perform SPI4 link training */ + INVOKE_CB(cvmx_spi_callbacks.training_cb, interface, mode, timeout); + + /* Callback to perform calendar sync */ + INVOKE_CB(cvmx_spi_callbacks.calendar_sync_cb, interface, mode, + timeout); + + /* Callback to handle interface coming up */ + INVOKE_CB(cvmx_spi_callbacks.interface_up_cb, interface, mode); + + return res; +} +EXPORT_SYMBOL_GPL(cvmx_spi_restart_interface); + +/** + * Callback to perform SPI4 reset + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode) +{ + union cvmx_spxx_dbg_deskew_ctl spxx_dbg_deskew_ctl; + union cvmx_spxx_clk_ctl spxx_clk_ctl; + union cvmx_spxx_bist_stat spxx_bist_stat; + union cvmx_spxx_int_msk spxx_int_msk; + union cvmx_stxx_int_msk stxx_int_msk; + union cvmx_spxx_trn4_ctl spxx_trn4_ctl; + int index; + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + + /* Disable SPI error events while we run BIST */ + spxx_int_msk.u64 = cvmx_read_csr(CVMX_SPXX_INT_MSK(interface)); + cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0); + stxx_int_msk.u64 = cvmx_read_csr(CVMX_STXX_INT_MSK(interface)); + cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0); + + /* Run BIST in the SPI interface */ + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), 0); + cvmx_write_csr(CVMX_STXX_COM_CTL(interface), 0); + spxx_clk_ctl.u64 = 0; + spxx_clk_ctl.s.runbist = 1; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + __delay(10 * MS); + spxx_bist_stat.u64 = cvmx_read_csr(CVMX_SPXX_BIST_STAT(interface)); + if (spxx_bist_stat.s.stat0) + cvmx_dprintf + ("ERROR SPI%d: BIST failed on receive datapath FIFO\n", + interface); + if (spxx_bist_stat.s.stat1) + cvmx_dprintf("ERROR SPI%d: BIST failed on RX calendar table\n", + interface); + if (spxx_bist_stat.s.stat2) + cvmx_dprintf("ERROR SPI%d: BIST failed on TX calendar table\n", + interface); + + /* Clear the calendar table after BIST to fix parity errors */ + for (index = 0; index < 32; index++) { + union cvmx_srxx_spi4_calx srxx_spi4_calx; + union cvmx_stxx_spi4_calx stxx_spi4_calx; + + srxx_spi4_calx.u64 = 0; + srxx_spi4_calx.s.oddpar = 1; + cvmx_write_csr(CVMX_SRXX_SPI4_CALX(index, interface), + srxx_spi4_calx.u64); + + stxx_spi4_calx.u64 = 0; + stxx_spi4_calx.s.oddpar = 1; + cvmx_write_csr(CVMX_STXX_SPI4_CALX(index, interface), + stxx_spi4_calx.u64); + } + + /* Re enable reporting of error interrupts */ + cvmx_write_csr(CVMX_SPXX_INT_REG(interface), + cvmx_read_csr(CVMX_SPXX_INT_REG(interface))); + cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), spxx_int_msk.u64); + cvmx_write_csr(CVMX_STXX_INT_REG(interface), + cvmx_read_csr(CVMX_STXX_INT_REG(interface))); + cvmx_write_csr(CVMX_STXX_INT_MSK(interface), stxx_int_msk.u64); + + /* Setup the CLKDLY right in the middle */ + spxx_clk_ctl.u64 = 0; + spxx_clk_ctl.s.seetrn = 0; + spxx_clk_ctl.s.clkdly = 0x10; + spxx_clk_ctl.s.runbist = 0; + spxx_clk_ctl.s.statdrv = 0; + /* This should always be on the opposite edge as statdrv */ + spxx_clk_ctl.s.statrcv = 1; + spxx_clk_ctl.s.sndtrn = 0; + spxx_clk_ctl.s.drptrn = 0; + spxx_clk_ctl.s.rcvtrn = 0; + spxx_clk_ctl.s.srxdlck = 0; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + __delay(100 * MS); + + /* Reset SRX0 DLL */ + spxx_clk_ctl.s.srxdlck = 1; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + + /* Waiting for Inf0 Spi4 RX DLL to lock */ + __delay(100 * MS); + + /* Enable dynamic alignment */ + spxx_trn4_ctl.s.trntest = 0; + spxx_trn4_ctl.s.jitter = 1; + spxx_trn4_ctl.s.clr_boot = 1; + spxx_trn4_ctl.s.set_boot = 0; + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) + spxx_trn4_ctl.s.maxdist = 3; + else + spxx_trn4_ctl.s.maxdist = 8; + spxx_trn4_ctl.s.macro_en = 1; + spxx_trn4_ctl.s.mux_en = 1; + cvmx_write_csr(CVMX_SPXX_TRN4_CTL(interface), spxx_trn4_ctl.u64); + + spxx_dbg_deskew_ctl.u64 = 0; + cvmx_write_csr(CVMX_SPXX_DBG_DESKEW_CTL(interface), + spxx_dbg_deskew_ctl.u64); + + return 0; +} + +/** + * Callback to setup calendar and miscellaneous settings before clock detection + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @num_ports: Number of ports to configure on SPI + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, + int num_ports) +{ + int port; + int index; + if (mode & CVMX_SPI_MODE_RX_HALFPLEX) { + union cvmx_srxx_com_ctl srxx_com_ctl; + union cvmx_srxx_spi4_stat srxx_spi4_stat; + + /* SRX0 number of Ports */ + srxx_com_ctl.u64 = 0; + srxx_com_ctl.s.prts = num_ports - 1; + srxx_com_ctl.s.st_en = 0; + srxx_com_ctl.s.inf_en = 0; + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64); + + /* SRX0 Calendar Table. This round robbins through all ports */ + port = 0; + index = 0; + while (port < num_ports) { + union cvmx_srxx_spi4_calx srxx_spi4_calx; + srxx_spi4_calx.u64 = 0; + srxx_spi4_calx.s.prt0 = port++; + srxx_spi4_calx.s.prt1 = port++; + srxx_spi4_calx.s.prt2 = port++; + srxx_spi4_calx.s.prt3 = port++; + srxx_spi4_calx.s.oddpar = + ~(cvmx_dpop(srxx_spi4_calx.u64) & 1); + cvmx_write_csr(CVMX_SRXX_SPI4_CALX(index, interface), + srxx_spi4_calx.u64); + index++; + } + srxx_spi4_stat.u64 = 0; + srxx_spi4_stat.s.len = num_ports; + srxx_spi4_stat.s.m = 1; + cvmx_write_csr(CVMX_SRXX_SPI4_STAT(interface), + srxx_spi4_stat.u64); + } + + if (mode & CVMX_SPI_MODE_TX_HALFPLEX) { + union cvmx_stxx_arb_ctl stxx_arb_ctl; + union cvmx_gmxx_tx_spi_max gmxx_tx_spi_max; + union cvmx_gmxx_tx_spi_thresh gmxx_tx_spi_thresh; + union cvmx_gmxx_tx_spi_ctl gmxx_tx_spi_ctl; + union cvmx_stxx_spi4_stat stxx_spi4_stat; + union cvmx_stxx_spi4_dat stxx_spi4_dat; + + /* STX0 Config */ + stxx_arb_ctl.u64 = 0; + stxx_arb_ctl.s.igntpa = 0; + stxx_arb_ctl.s.mintrn = 0; + cvmx_write_csr(CVMX_STXX_ARB_CTL(interface), stxx_arb_ctl.u64); + + gmxx_tx_spi_max.u64 = 0; + gmxx_tx_spi_max.s.max1 = 8; + gmxx_tx_spi_max.s.max2 = 4; + gmxx_tx_spi_max.s.slice = 0; + cvmx_write_csr(CVMX_GMXX_TX_SPI_MAX(interface), + gmxx_tx_spi_max.u64); + + gmxx_tx_spi_thresh.u64 = 0; + gmxx_tx_spi_thresh.s.thresh = 4; + cvmx_write_csr(CVMX_GMXX_TX_SPI_THRESH(interface), + gmxx_tx_spi_thresh.u64); + + gmxx_tx_spi_ctl.u64 = 0; + gmxx_tx_spi_ctl.s.tpa_clr = 0; + gmxx_tx_spi_ctl.s.cont_pkt = 0; + cvmx_write_csr(CVMX_GMXX_TX_SPI_CTL(interface), + gmxx_tx_spi_ctl.u64); + + /* STX0 Training Control */ + stxx_spi4_dat.u64 = 0; + /*Minimum needed by dynamic alignment */ + stxx_spi4_dat.s.alpha = 32; + stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ + cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface), + stxx_spi4_dat.u64); + + /* STX0 Calendar Table. This round robbins through all ports */ + port = 0; + index = 0; + while (port < num_ports) { + union cvmx_stxx_spi4_calx stxx_spi4_calx; + stxx_spi4_calx.u64 = 0; + stxx_spi4_calx.s.prt0 = port++; + stxx_spi4_calx.s.prt1 = port++; + stxx_spi4_calx.s.prt2 = port++; + stxx_spi4_calx.s.prt3 = port++; + stxx_spi4_calx.s.oddpar = + ~(cvmx_dpop(stxx_spi4_calx.u64) & 1); + cvmx_write_csr(CVMX_STXX_SPI4_CALX(index, interface), + stxx_spi4_calx.u64); + index++; + } + stxx_spi4_stat.u64 = 0; + stxx_spi4_stat.s.len = num_ports; + stxx_spi4_stat.s.m = 1; + cvmx_write_csr(CVMX_STXX_SPI4_STAT(interface), + stxx_spi4_stat.u64); + } + + return 0; +} + +/** + * Callback to perform clock detection + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout) +{ + int clock_transitions; + union cvmx_spxx_clk_stat stat; + uint64_t timeout_time; + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + + /* + * Regardless of operating mode, both Tx and Rx clocks must be + * present for the SPI interface to operate. + */ + cvmx_dprintf("SPI%d: Waiting to see TsClk...\n", interface); + timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + /* + * Require 100 clock transitions in order to avoid any noise + * in the beginning. + */ + clock_transitions = 100; + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (stat.s.s4clk0 && stat.s.s4clk1 && clock_transitions) { + /* + * We've seen a clock transition, so decrement + * the number we still need. + */ + clock_transitions--; + cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64); + stat.s.s4clk0 = 0; + stat.s.s4clk1 = 0; + } + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.s4clk0 == 0 || stat.s.s4clk1 == 0); + + cvmx_dprintf("SPI%d: Waiting to see RsClk...\n", interface); + timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + /* + * Require 100 clock transitions in order to avoid any noise in the + * beginning. + */ + clock_transitions = 100; + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (stat.s.d4clk0 && stat.s.d4clk1 && clock_transitions) { + /* + * We've seen a clock transition, so decrement + * the number we still need + */ + clock_transitions--; + cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64); + stat.s.d4clk0 = 0; + stat.s.d4clk1 = 0; + } + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.d4clk0 == 0 || stat.s.d4clk1 == 0); + + return 0; +} + +/** + * Callback to perform link training + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for link to be trained (in seconds) + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout) +{ + union cvmx_spxx_trn4_ctl spxx_trn4_ctl; + union cvmx_spxx_clk_stat stat; + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + uint64_t timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + int rx_training_needed; + + /* SRX0 & STX0 Inf0 Links are configured - begin training */ + union cvmx_spxx_clk_ctl spxx_clk_ctl; + spxx_clk_ctl.u64 = 0; + spxx_clk_ctl.s.seetrn = 0; + spxx_clk_ctl.s.clkdly = 0x10; + spxx_clk_ctl.s.runbist = 0; + spxx_clk_ctl.s.statdrv = 0; + /* This should always be on the opposite edge as statdrv */ + spxx_clk_ctl.s.statrcv = 1; + spxx_clk_ctl.s.sndtrn = 1; + spxx_clk_ctl.s.drptrn = 1; + spxx_clk_ctl.s.rcvtrn = 1; + spxx_clk_ctl.s.srxdlck = 1; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + __delay(1000 * MS); + + /* SRX0 clear the boot bit */ + spxx_trn4_ctl.u64 = cvmx_read_csr(CVMX_SPXX_TRN4_CTL(interface)); + spxx_trn4_ctl.s.clr_boot = 1; + cvmx_write_csr(CVMX_SPXX_TRN4_CTL(interface), spxx_trn4_ctl.u64); + + /* Wait for the training sequence to complete */ + cvmx_dprintf("SPI%d: Waiting for training\n", interface); + __delay(1000 * MS); + /* Wait a really long time here */ + timeout_time = cvmx_get_cycle() + 1000ull * MS * 600; + /* + * The HRM says we must wait for 34 + 16 * MAXDIST training sequences. + * We'll be pessimistic and wait for a lot more. + */ + rx_training_needed = 500; + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (stat.s.srxtrn && rx_training_needed) { + rx_training_needed--; + cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64); + stat.s.srxtrn = 0; + } + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.srxtrn == 0); + + return 0; +} + +/** + * Callback to perform calendar data synchronization + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for calendar data in seconds + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout) +{ + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + if (mode & CVMX_SPI_MODE_RX_HALFPLEX) { + /* SRX0 interface should be good, send calendar data */ + union cvmx_srxx_com_ctl srxx_com_ctl; + cvmx_dprintf + ("SPI%d: Rx is synchronized, start sending calendar data\n", + interface); + srxx_com_ctl.u64 = cvmx_read_csr(CVMX_SRXX_COM_CTL(interface)); + srxx_com_ctl.s.inf_en = 1; + srxx_com_ctl.s.st_en = 1; + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64); + } + + if (mode & CVMX_SPI_MODE_TX_HALFPLEX) { + /* STX0 has achieved sync */ + /* The corespondant board should be sending calendar data */ + /* Enable the STX0 STAT receiver. */ + union cvmx_spxx_clk_stat stat; + uint64_t timeout_time; + union cvmx_stxx_com_ctl stxx_com_ctl; + stxx_com_ctl.u64 = 0; + stxx_com_ctl.s.st_en = 1; + cvmx_write_csr(CVMX_STXX_COM_CTL(interface), stxx_com_ctl.u64); + + /* Waiting for calendar sync on STX0 STAT */ + cvmx_dprintf("SPI%d: Waiting to sync on STX[%d] STAT\n", + interface, interface); + timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + /* SPX0_CLK_STAT - SPX0_CLK_STAT[STXCAL] should be 1 (bit10) */ + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.stxcal == 0); + } + + return 0; +} + +/** + * Callback to handle interface up + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_interface_up_cb(int interface, cvmx_spi_mode_t mode) +{ + union cvmx_gmxx_rxx_frm_min gmxx_rxx_frm_min; + union cvmx_gmxx_rxx_frm_max gmxx_rxx_frm_max; + union cvmx_gmxx_rxx_jabber gmxx_rxx_jabber; + + if (mode & CVMX_SPI_MODE_RX_HALFPLEX) { + union cvmx_srxx_com_ctl srxx_com_ctl; + srxx_com_ctl.u64 = cvmx_read_csr(CVMX_SRXX_COM_CTL(interface)); + srxx_com_ctl.s.inf_en = 1; + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64); + cvmx_dprintf("SPI%d: Rx is now up\n", interface); + } + + if (mode & CVMX_SPI_MODE_TX_HALFPLEX) { + union cvmx_stxx_com_ctl stxx_com_ctl; + stxx_com_ctl.u64 = cvmx_read_csr(CVMX_STXX_COM_CTL(interface)); + stxx_com_ctl.s.inf_en = 1; + cvmx_write_csr(CVMX_STXX_COM_CTL(interface), stxx_com_ctl.u64); + cvmx_dprintf("SPI%d: Tx is now up\n", interface); + } + + gmxx_rxx_frm_min.u64 = 0; + gmxx_rxx_frm_min.s.len = 64; + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MIN(0, interface), + gmxx_rxx_frm_min.u64); + gmxx_rxx_frm_max.u64 = 0; + gmxx_rxx_frm_max.s.len = 64 * 1024 - 4; + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(0, interface), + gmxx_rxx_frm_max.u64); + gmxx_rxx_jabber.u64 = 0; + gmxx_rxx_jabber.s.cnt = 64 * 1024 - 4; + cvmx_write_csr(CVMX_GMXX_RXX_JABBER(0, interface), gmxx_rxx_jabber.u64); + + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c new file mode 100644 index 000000000..30ecba134 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c @@ -0,0 +1,53 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * This module provides system/board/application information obtained + * by the bootloader. + */ +#include <linux/export.h> + +#include <asm/octeon/cvmx.h> +#include <asm/octeon/cvmx-sysinfo.h> + +/* + * This structure defines the private state maintained by sysinfo module. + */ +static struct cvmx_sysinfo sysinfo; /* system information */ + +/* + * Returns the application information as obtained + * by the bootloader. This provides the core mask of the cores + * running the same application image, as well as the physical + * memory regions available to the core. + */ +struct cvmx_sysinfo *cvmx_sysinfo_get(void) +{ + return &sysinfo; +} +EXPORT_SYMBOL(cvmx_sysinfo_get); + diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c new file mode 100644 index 000000000..341052387 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/octeon-model.c @@ -0,0 +1,511 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2017 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#include <asm/octeon/octeon.h> + +enum octeon_feature_bits __octeon_feature_bits __read_mostly; +EXPORT_SYMBOL_GPL(__octeon_feature_bits); + +/** + * Read a byte of fuse data + * @byte_addr: address to read + * + * Returns fuse value: 0 or 1 + */ +static uint8_t __init cvmx_fuse_read_byte(int byte_addr) +{ + union cvmx_mio_fus_rcmd read_cmd; + + read_cmd.u64 = 0; + read_cmd.s.addr = byte_addr; + read_cmd.s.pend = 1; + cvmx_write_csr(CVMX_MIO_FUS_RCMD, read_cmd.u64); + while ((read_cmd.u64 = cvmx_read_csr(CVMX_MIO_FUS_RCMD)) + && read_cmd.s.pend) + ; + return read_cmd.s.dat; +} + +/* + * Version of octeon_model_get_string() that takes buffer as argument, + * as running early in u-boot static/global variables don't work when + * running from flash. + */ +static const char *__init octeon_model_get_string_buffer(uint32_t chip_id, + char *buffer) +{ + const char *family; + const char *core_model; + char pass[4]; + int clock_mhz; + const char *suffix; + int num_cores; + union cvmx_mio_fus_dat2 fus_dat2; + union cvmx_mio_fus_dat3 fus_dat3; + char fuse_model[10]; + uint32_t fuse_data = 0; + uint64_t l2d_fus3 = 0; + + if (OCTEON_IS_MODEL(OCTEON_CN3XXX) || OCTEON_IS_MODEL(OCTEON_CN5XXX)) + l2d_fus3 = (cvmx_read_csr(CVMX_L2D_FUS3) >> 34) & 0x3; + fus_dat2.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT2); + fus_dat3.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT3); + num_cores = cvmx_octeon_num_cores(); + + /* Make sure the non existent devices look disabled */ + switch ((chip_id >> 8) & 0xff) { + case 6: /* CN50XX */ + case 2: /* CN30XX */ + fus_dat3.s.nodfa_dte = 1; + fus_dat3.s.nozip = 1; + break; + case 4: /* CN57XX or CN56XX */ + fus_dat3.s.nodfa_dte = 1; + break; + default: + break; + } + + /* Make a guess at the suffix */ + /* NSP = everything */ + /* EXP = No crypto */ + /* SCP = No DFA, No zip */ + /* CP = No DFA, No crypto, No zip */ + if (fus_dat3.s.nodfa_dte) { + if (fus_dat2.s.nocrypto) + suffix = "CP"; + else + suffix = "SCP"; + } else if (fus_dat2.s.nocrypto) + suffix = "EXP"; + else + suffix = "NSP"; + + if (!fus_dat2.s.nocrypto) + __octeon_feature_bits |= OCTEON_HAS_CRYPTO; + + /* + * Assume pass number is encoded using <5:3><2:0>. Exceptions + * will be fixed later. + */ + sprintf(pass, "%d.%d", (int)((chip_id >> 3) & 7) + 1, (int)chip_id & 7); + + /* + * Use the number of cores to determine the last 2 digits of + * the model number. There are some exceptions that are fixed + * later. + */ + switch (num_cores) { + case 48: + core_model = "90"; + break; + case 44: + core_model = "88"; + break; + case 40: + core_model = "85"; + break; + case 32: + core_model = "80"; + break; + case 24: + core_model = "70"; + break; + case 16: + core_model = "60"; + break; + case 15: + core_model = "58"; + break; + case 14: + core_model = "55"; + break; + case 13: + core_model = "52"; + break; + case 12: + core_model = "50"; + break; + case 11: + core_model = "48"; + break; + case 10: + core_model = "45"; + break; + case 9: + core_model = "42"; + break; + case 8: + core_model = "40"; + break; + case 7: + core_model = "38"; + break; + case 6: + core_model = "34"; + break; + case 5: + core_model = "32"; + break; + case 4: + core_model = "30"; + break; + case 3: + core_model = "25"; + break; + case 2: + core_model = "20"; + break; + case 1: + core_model = "10"; + break; + default: + core_model = "XX"; + break; + } + + /* Now figure out the family, the first two digits */ + switch ((chip_id >> 8) & 0xff) { + case 0: /* CN38XX, CN37XX or CN36XX */ + if (l2d_fus3) { + /* + * For some unknown reason, the 16 core one is + * called 37 instead of 36. + */ + if (num_cores >= 16) + family = "37"; + else + family = "36"; + } else + family = "38"; + /* + * This series of chips didn't follow the standard + * pass numbering. + */ + switch (chip_id & 0xf) { + case 0: + strcpy(pass, "1.X"); + break; + case 1: + strcpy(pass, "2.X"); + break; + case 3: + strcpy(pass, "3.X"); + break; + default: + strcpy(pass, "X.X"); + break; + } + break; + case 1: /* CN31XX or CN3020 */ + if ((chip_id & 0x10) || l2d_fus3) + family = "30"; + else + family = "31"; + /* + * This series of chips didn't follow the standard + * pass numbering. + */ + switch (chip_id & 0xf) { + case 0: + strcpy(pass, "1.0"); + break; + case 2: + strcpy(pass, "1.1"); + break; + default: + strcpy(pass, "X.X"); + break; + } + break; + case 2: /* CN3010 or CN3005 */ + family = "30"; + /* A chip with half cache is an 05 */ + if (l2d_fus3) + core_model = "05"; + /* + * This series of chips didn't follow the standard + * pass numbering. + */ + switch (chip_id & 0xf) { + case 0: + strcpy(pass, "1.0"); + break; + case 2: + strcpy(pass, "1.1"); + break; + default: + strcpy(pass, "X.X"); + break; + } + break; + case 3: /* CN58XX */ + family = "58"; + /* Special case. 4 core, half cache (CP with half cache) */ + if ((num_cores == 4) && l2d_fus3 && !strncmp(suffix, "CP", 2)) + core_model = "29"; + + /* Pass 1 uses different encodings for pass numbers */ + if ((chip_id & 0xFF) < 0x8) { + switch (chip_id & 0x3) { + case 0: + strcpy(pass, "1.0"); + break; + case 1: + strcpy(pass, "1.1"); + break; + case 3: + strcpy(pass, "1.2"); + break; + default: + strcpy(pass, "1.X"); + break; + } + } + break; + case 4: /* CN57XX, CN56XX, CN55XX, CN54XX */ + if (fus_dat2.cn56xx.raid_en) { + if (l2d_fus3) + family = "55"; + else + family = "57"; + if (fus_dat2.cn56xx.nocrypto) + suffix = "SP"; + else + suffix = "SSP"; + } else { + if (fus_dat2.cn56xx.nocrypto) + suffix = "CP"; + else { + suffix = "NSP"; + if (fus_dat3.s.nozip) + suffix = "SCP"; + + if (fus_dat3.cn56xx.bar2_en) + suffix = "NSPB2"; + } + if (l2d_fus3) + family = "54"; + else + family = "56"; + } + break; + case 6: /* CN50XX */ + family = "50"; + break; + case 7: /* CN52XX */ + if (l2d_fus3) + family = "51"; + else + family = "52"; + break; + case 0x93: /* CN61XX */ + family = "61"; + if (fus_dat2.cn61xx.nocrypto && fus_dat2.cn61xx.dorm_crypto) + suffix = "AP"; + if (fus_dat2.cn61xx.nocrypto) + suffix = "CP"; + else if (fus_dat2.cn61xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn61xx.nozip) + suffix = "SCP"; + break; + case 0x90: /* CN63XX */ + family = "63"; + if (fus_dat3.s.l2c_crip == 2) + family = "62"; + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + if (fus_dat2.cn63xx.nocrypto) + suffix = "CP"; + else if (fus_dat2.cn63xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn63xx.nozip) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x92: /* CN66XX */ + family = "66"; + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + if (fus_dat2.cn66xx.nocrypto && fus_dat2.cn66xx.dorm_crypto) + suffix = "AP"; + if (fus_dat2.cn66xx.nocrypto) + suffix = "CP"; + else if (fus_dat2.cn66xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn66xx.nozip) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x91: /* CN68XX */ + family = "68"; + if (fus_dat2.cn68xx.nocrypto && fus_dat3.cn68xx.nozip) + suffix = "CP"; + else if (fus_dat2.cn68xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn68xx.nozip) + suffix = "SCP"; + else if (fus_dat2.cn68xx.nocrypto) + suffix = "SP"; + else + suffix = "AAP"; + break; + case 0x94: /* CNF71XX */ + family = "F71"; + if (fus_dat3.cnf71xx.nozip) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x95: /* CN78XX */ + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + if (OCTEON_IS_MODEL(OCTEON_CN76XX)) + family = "76"; + else + family = "78"; + if (fus_dat3.cn78xx.l2c_crip == 2) + family = "77"; + if (fus_dat3.cn78xx.nozip + && fus_dat3.cn78xx.nodfa_dte + && fus_dat3.cn78xx.nohna_dte) { + if (fus_dat3.cn78xx.nozip && + !fus_dat2.cn78xx.raid_en && + fus_dat3.cn78xx.nohna_dte) { + suffix = "CP"; + } else { + suffix = "SCP"; + } + } else if (fus_dat2.cn78xx.raid_en == 0) + suffix = "HCP"; + else + suffix = "AAP"; + break; + case 0x96: /* CN70XX */ + family = "70"; + if (cvmx_read_csr(CVMX_MIO_FUS_PDF) & (0x1ULL << 32)) + family = "71"; + if (fus_dat2.cn70xx.nocrypto) + suffix = "CP"; + else if (fus_dat3.cn70xx.nodfa_dte) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x97: /* CN73XX */ + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + family = "73"; + if (fus_dat3.cn73xx.l2c_crip == 2) + family = "72"; + if (fus_dat3.cn73xx.nozip + && fus_dat3.cn73xx.nodfa_dte + && fus_dat3.cn73xx.nohna_dte) { + if (!fus_dat2.cn73xx.raid_en) + suffix = "CP"; + else + suffix = "SCP"; + } else + suffix = "AAP"; + break; + case 0x98: /* CN75XX */ + family = "F75"; + if (fus_dat3.cn78xx.nozip + && fus_dat3.cn78xx.nodfa_dte + && fus_dat3.cn78xx.nohna_dte) + suffix = "SCP"; + else + suffix = "AAP"; + break; + default: + family = "XX"; + core_model = "XX"; + strcpy(pass, "X.X"); + suffix = "XXX"; + break; + } + + clock_mhz = octeon_get_clock_rate() / 1000000; + if (family[0] != '3') { + int fuse_base = 384 / 8; + if (family[0] == '6') + fuse_base = 832 / 8; + + /* Check for model in fuses, overrides normal decode */ + /* This is _not_ valid for Octeon CN3XXX models */ + fuse_data |= cvmx_fuse_read_byte(fuse_base + 3); + fuse_data = fuse_data << 8; + fuse_data |= cvmx_fuse_read_byte(fuse_base + 2); + fuse_data = fuse_data << 8; + fuse_data |= cvmx_fuse_read_byte(fuse_base + 1); + fuse_data = fuse_data << 8; + fuse_data |= cvmx_fuse_read_byte(fuse_base); + if (fuse_data & 0x7ffff) { + int model = fuse_data & 0x3fff; + int suffix = (fuse_data >> 14) & 0x1f; + if (suffix && model) { + /* Have both number and suffix in fuses, so both */ + sprintf(fuse_model, "%d%c", model, 'A' + suffix - 1); + core_model = ""; + family = fuse_model; + } else if (suffix && !model) { + /* Only have suffix, so add suffix to 'normal' model number */ + sprintf(fuse_model, "%s%c", core_model, 'A' + suffix - 1); + core_model = fuse_model; + } else { + /* Don't have suffix, so just use model from fuses */ + sprintf(fuse_model, "%d", model); + core_model = ""; + family = fuse_model; + } + } + } + sprintf(buffer, "CN%s%sp%s-%d-%s", family, core_model, pass, clock_mhz, suffix); + return buffer; +} + +/** + * Given the chip processor ID from COP0, this function returns a + * string representing the chip model number. The string is of the + * form CNXXXXpX.X-FREQ-SUFFIX. + * - XXXX = The chip model number + * - X.X = Chip pass number + * - FREQ = Current frequency in Mhz + * - SUFFIX = NSP, EXP, SCP, SSP, or CP + * + * @chip_id: Chip ID + * + * Returns Model string + */ +const char *__init octeon_model_get_string(uint32_t chip_id) +{ + static char buffer[32]; + return octeon_model_get_string_buffer(chip_id, buffer); +} diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c new file mode 100644 index 000000000..a5e8f4a78 --- /dev/null +++ b/arch/mips/cavium-octeon/flash_setup.c @@ -0,0 +1,143 @@ +/* + * Octeon Bootbus flash setup + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007, 2008 Cavium Networks + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/semaphore.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/of_platform.h> +#include <linux/mtd/partitions.h> + +#include <asm/octeon/octeon.h> + +static struct map_info flash_map; +static struct mtd_info *mymtd; +static const char *part_probe_types[] = { + "cmdlinepart", +#ifdef CONFIG_MTD_REDBOOT_PARTS + "RedBoot", +#endif + NULL +}; + +static map_word octeon_flash_map_read(struct map_info *map, unsigned long ofs) +{ + map_word r; + + down(&octeon_bootbus_sem); + r = inline_map_read(map, ofs); + up(&octeon_bootbus_sem); + + return r; +} + +static void octeon_flash_map_write(struct map_info *map, const map_word datum, + unsigned long ofs) +{ + down(&octeon_bootbus_sem); + inline_map_write(map, datum, ofs); + up(&octeon_bootbus_sem); +} + +static void octeon_flash_map_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) +{ + down(&octeon_bootbus_sem); + inline_map_copy_from(map, to, from, len); + up(&octeon_bootbus_sem); +} + +static void octeon_flash_map_copy_to(struct map_info *map, unsigned long to, + const void *from, ssize_t len) +{ + down(&octeon_bootbus_sem); + inline_map_copy_to(map, to, from, len); + up(&octeon_bootbus_sem); +} + +/** + * Module/ driver initialization. + * + * Returns Zero on success + */ +static int octeon_flash_probe(struct platform_device *pdev) +{ + union cvmx_mio_boot_reg_cfgx region_cfg; + u32 cs; + int r; + struct device_node *np = pdev->dev.of_node; + + r = of_property_read_u32(np, "reg", &cs); + if (r) + return r; + + /* + * Read the bootbus region 0 setup to determine the base + * address of the flash. + */ + region_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs)); + if (region_cfg.s.en) { + /* + * The bootloader always takes the flash and sets its + * address so the entire flash fits below + * 0x1fc00000. This way the flash aliases to + * 0x1fc00000 for booting. Software can access the + * full flash at the true address, while core boot can + * access 4MB. + */ + /* Use this name so old part lines work */ + flash_map.name = "phys_mapped_flash"; + flash_map.phys = region_cfg.s.base << 16; + flash_map.size = 0x1fc00000 - flash_map.phys; + /* 8-bit bus (0 + 1) or 16-bit bus (1 + 1) */ + flash_map.bankwidth = region_cfg.s.width + 1; + flash_map.virt = ioremap(flash_map.phys, flash_map.size); + pr_notice("Bootbus flash: Setting flash for %luMB flash at " + "0x%08llx\n", flash_map.size >> 20, flash_map.phys); + WARN_ON(!map_bankwidth_supported(flash_map.bankwidth)); + flash_map.read = octeon_flash_map_read; + flash_map.write = octeon_flash_map_write; + flash_map.copy_from = octeon_flash_map_copy_from; + flash_map.copy_to = octeon_flash_map_copy_to; + mymtd = do_map_probe("cfi_probe", &flash_map); + if (mymtd) { + mymtd->owner = THIS_MODULE; + mtd_device_parse_register(mymtd, part_probe_types, + NULL, NULL, 0); + } else { + pr_err("Failed to register MTD device for flash\n"); + } + } + return 0; +} + +static const struct of_device_id of_flash_match[] = { + { + .compatible = "cfi-flash", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_flash_match); + +static struct platform_driver of_flash_driver = { + .driver = { + .name = "octeon-of-flash", + .of_match_table = of_flash_match, + }, + .probe = octeon_flash_probe, +}; + +static int octeon_flash_init(void) +{ + return platform_driver_register(&of_flash_driver); +} +late_initcall(octeon_flash_init); + +MODULE_LICENSE("GPL"); diff --git a/arch/mips/cavium-octeon/oct_ilm.c b/arch/mips/cavium-octeon/oct_ilm.c new file mode 100644 index 000000000..2d68a39f1 --- /dev/null +++ b/arch/mips/cavium-octeon/oct_ilm.c @@ -0,0 +1,205 @@ +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-ciu-defs.h> +#include <asm/octeon/cvmx.h> +#include <linux/debugfs.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/seq_file.h> + +#define TIMER_NUM 3 + +static bool reset_stats; + +struct latency_info { + u64 io_interval; + u64 cpu_interval; + u64 timer_start1; + u64 timer_start2; + u64 max_latency; + u64 min_latency; + u64 latency_sum; + u64 average_latency; + u64 interrupt_cnt; +}; + +static struct latency_info li; +static struct dentry *dir; + +static int show_latency(struct seq_file *m, void *v) +{ + u64 cpuclk, avg, max, min; + struct latency_info curr_li = li; + + cpuclk = octeon_get_clock_rate(); + + max = (curr_li.max_latency * 1000000000) / cpuclk; + min = (curr_li.min_latency * 1000000000) / cpuclk; + avg = (curr_li.latency_sum * 1000000000) / (cpuclk * curr_li.interrupt_cnt); + + seq_printf(m, "cnt: %10lld, avg: %7lld ns, max: %7lld ns, min: %7lld ns\n", + curr_li.interrupt_cnt, avg, max, min); + return 0; +} + +static int oct_ilm_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_latency, NULL); +} + +static const struct file_operations oct_ilm_ops = { + .open = oct_ilm_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int reset_statistics(void *data, u64 value) +{ + reset_stats = true; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(reset_statistics_ops, NULL, reset_statistics, "%llu\n"); + +static int init_debufs(void) +{ + struct dentry *show_dentry; + dir = debugfs_create_dir("oct_ilm", 0); + if (!dir) { + pr_err("oct_ilm: failed to create debugfs entry oct_ilm\n"); + return -1; + } + + show_dentry = debugfs_create_file("statistics", 0222, dir, NULL, + &oct_ilm_ops); + if (!show_dentry) { + pr_err("oct_ilm: failed to create debugfs entry oct_ilm/statistics\n"); + return -1; + } + + show_dentry = debugfs_create_file("reset", 0222, dir, NULL, + &reset_statistics_ops); + if (!show_dentry) { + pr_err("oct_ilm: failed to create debugfs entry oct_ilm/reset\n"); + return -1; + } + + return 0; + +} + +static void init_latency_info(struct latency_info *li, int startup) +{ + /* interval in milli seconds after which the interrupt will + * be triggered + */ + int interval = 1; + + if (startup) { + /* Calculating by the amounts io clock and cpu clock would + * increment in interval amount of ms + */ + li->io_interval = (octeon_get_io_clock_rate() * interval) / 1000; + li->cpu_interval = (octeon_get_clock_rate() * interval) / 1000; + } + li->timer_start1 = 0; + li->timer_start2 = 0; + li->max_latency = 0; + li->min_latency = (u64)-1; + li->latency_sum = 0; + li->interrupt_cnt = 0; +} + + +static void start_timer(int timer, u64 interval) +{ + union cvmx_ciu_timx timx; + unsigned long flags; + + timx.u64 = 0; + timx.s.one_shot = 1; + timx.s.len = interval; + raw_local_irq_save(flags); + li.timer_start1 = read_c0_cvmcount(); + cvmx_write_csr(CVMX_CIU_TIMX(timer), timx.u64); + /* Read it back to force wait until register is written. */ + timx.u64 = cvmx_read_csr(CVMX_CIU_TIMX(timer)); + li.timer_start2 = read_c0_cvmcount(); + raw_local_irq_restore(flags); +} + + +static irqreturn_t cvm_oct_ciu_timer_interrupt(int cpl, void *dev_id) +{ + u64 last_latency; + u64 last_int_cnt; + + if (reset_stats) { + init_latency_info(&li, 0); + reset_stats = false; + } else { + last_int_cnt = read_c0_cvmcount(); + last_latency = last_int_cnt - (li.timer_start1 + li.cpu_interval); + li.interrupt_cnt++; + li.latency_sum += last_latency; + if (last_latency > li.max_latency) + li.max_latency = last_latency; + if (last_latency < li.min_latency) + li.min_latency = last_latency; + } + start_timer(TIMER_NUM, li.io_interval); + return IRQ_HANDLED; +} + +static void disable_timer(int timer) +{ + union cvmx_ciu_timx timx; + + timx.s.one_shot = 0; + timx.s.len = 0; + cvmx_write_csr(CVMX_CIU_TIMX(timer), timx.u64); + /* Read it back to force immediate write of timer register*/ + timx.u64 = cvmx_read_csr(CVMX_CIU_TIMX(timer)); +} + +static __init int oct_ilm_module_init(void) +{ + int rc; + int irq = OCTEON_IRQ_TIMER0 + TIMER_NUM; + + rc = init_debufs(); + if (rc) { + WARN(1, "Could not create debugfs entries"); + return rc; + } + + rc = request_irq(irq, cvm_oct_ciu_timer_interrupt, IRQF_NO_THREAD, + "oct_ilm", 0); + if (rc) { + WARN(1, "Could not acquire IRQ %d", irq); + goto err_irq; + } + + init_latency_info(&li, 1); + start_timer(TIMER_NUM, li.io_interval); + + return 0; +err_irq: + debugfs_remove_recursive(dir); + return rc; +} + +static __exit void oct_ilm_module_exit(void) +{ + disable_timer(TIMER_NUM); + debugfs_remove_recursive(dir); + free_irq(OCTEON_IRQ_TIMER0 + TIMER_NUM, 0); +} + +module_exit(oct_ilm_module_exit); +module_init(oct_ilm_module_init); +MODULE_AUTHOR("Venkat Subbiah, Cavium"); +MODULE_DESCRIPTION("Measures interrupt latency on Octeon chips."); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c new file mode 100644 index 000000000..43e4fc1b3 --- /dev/null +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -0,0 +1,2979 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2016 Cavium, Inc. + */ + +#include <linux/of_address.h> +#include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/bitops.h> +#include <linux/of_irq.h> +#include <linux/percpu.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/smp.h> +#include <linux/of.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-ciu2-defs.h> +#include <asm/octeon/cvmx-ciu3-defs.h> + +static DEFINE_PER_CPU(unsigned long, octeon_irq_ciu0_en_mirror); +static DEFINE_PER_CPU(unsigned long, octeon_irq_ciu1_en_mirror); +static DEFINE_PER_CPU(raw_spinlock_t, octeon_irq_ciu_spinlock); +static DEFINE_PER_CPU(unsigned int, octeon_irq_ciu3_idt_ip2); + +static DEFINE_PER_CPU(unsigned int, octeon_irq_ciu3_idt_ip3); +static DEFINE_PER_CPU(struct octeon_ciu3_info *, octeon_ciu3_info); +#define CIU3_MBOX_PER_CORE 10 + +/* + * The 8 most significant bits of the intsn identify the interrupt major block. + * Each major block might use its own interrupt domain. Thus 256 domains are + * needed. + */ +#define MAX_CIU3_DOMAINS 256 + +typedef irq_hw_number_t (*octeon_ciu3_intsn2hw_t)(struct irq_domain *, unsigned int); + +/* Information for each ciu3 in the system */ +struct octeon_ciu3_info { + u64 ciu3_addr; + int node; + struct irq_domain *domain[MAX_CIU3_DOMAINS]; + octeon_ciu3_intsn2hw_t intsn2hw[MAX_CIU3_DOMAINS]; +}; + +/* Each ciu3 in the system uses its own data (one ciu3 per node) */ +static struct octeon_ciu3_info *octeon_ciu3_info_per_node[4]; + +struct octeon_irq_ciu_domain_data { + int num_sum; /* number of sum registers (2 or 3). */ +}; + +/* Register offsets from ciu3_addr */ +#define CIU3_CONST 0x220 +#define CIU3_IDT_CTL(_idt) ((_idt) * 8 + 0x110000) +#define CIU3_IDT_PP(_idt, _idx) ((_idt) * 32 + (_idx) * 8 + 0x120000) +#define CIU3_IDT_IO(_idt) ((_idt) * 8 + 0x130000) +#define CIU3_DEST_PP_INT(_pp_ip) ((_pp_ip) * 8 + 0x200000) +#define CIU3_DEST_IO_INT(_io) ((_io) * 8 + 0x210000) +#define CIU3_ISC_CTL(_intsn) ((_intsn) * 8 + 0x80000000) +#define CIU3_ISC_W1C(_intsn) ((_intsn) * 8 + 0x90000000) +#define CIU3_ISC_W1S(_intsn) ((_intsn) * 8 + 0xa0000000) + +static __read_mostly int octeon_irq_ciu_to_irq[8][64]; + +struct octeon_ciu_chip_data { + union { + struct { /* only used for ciu3 */ + u64 ciu3_addr; + unsigned int intsn; + }; + struct { /* only used for ciu/ciu2 */ + u8 line; + u8 bit; + }; + }; + int gpio_line; + int current_cpu; /* Next CPU expected to take this irq */ + int ciu_node; /* NUMA node number of the CIU */ +}; + +struct octeon_core_chip_data { + struct mutex core_irq_mutex; + bool current_en; + bool desired_en; + u8 bit; +}; + +#define MIPS_CORE_IRQ_LINES 8 + +static struct octeon_core_chip_data octeon_irq_core_chip_data[MIPS_CORE_IRQ_LINES]; + +static int octeon_irq_set_ciu_mapping(int irq, int line, int bit, int gpio_line, + struct irq_chip *chip, + irq_flow_handler_t handler) +{ + struct octeon_ciu_chip_data *cd; + + cd = kzalloc(sizeof(*cd), GFP_KERNEL); + if (!cd) + return -ENOMEM; + + irq_set_chip_and_handler(irq, chip, handler); + + cd->line = line; + cd->bit = bit; + cd->gpio_line = gpio_line; + + irq_set_chip_data(irq, cd); + octeon_irq_ciu_to_irq[line][bit] = irq; + return 0; +} + +static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq) +{ + struct irq_data *data = irq_get_irq_data(irq); + struct octeon_ciu_chip_data *cd = irq_data_get_irq_chip_data(data); + + irq_set_chip_data(irq, NULL); + kfree(cd); +} + +static int octeon_irq_force_ciu_mapping(struct irq_domain *domain, + int irq, int line, int bit) +{ + return irq_domain_associate(domain, irq, line << 6 | bit); +} + +static int octeon_coreid_for_cpu(int cpu) +{ +#ifdef CONFIG_SMP + return cpu_logical_map(cpu); +#else + return cvmx_get_core_num(); +#endif +} + +static int octeon_cpu_for_coreid(int coreid) +{ +#ifdef CONFIG_SMP + return cpu_number_map(coreid); +#else + return smp_processor_id(); +#endif +} + +static void octeon_irq_core_ack(struct irq_data *data) +{ + struct octeon_core_chip_data *cd = irq_data_get_irq_chip_data(data); + unsigned int bit = cd->bit; + + /* + * We don't need to disable IRQs to make these atomic since + * they are already disabled earlier in the low level + * interrupt code. + */ + clear_c0_status(0x100 << bit); + /* The two user interrupts must be cleared manually. */ + if (bit < 2) + clear_c0_cause(0x100 << bit); +} + +static void octeon_irq_core_eoi(struct irq_data *data) +{ + struct octeon_core_chip_data *cd = irq_data_get_irq_chip_data(data); + + /* + * We don't need to disable IRQs to make these atomic since + * they are already disabled earlier in the low level + * interrupt code. + */ + set_c0_status(0x100 << cd->bit); +} + +static void octeon_irq_core_set_enable_local(void *arg) +{ + struct irq_data *data = arg; + struct octeon_core_chip_data *cd = irq_data_get_irq_chip_data(data); + unsigned int mask = 0x100 << cd->bit; + + /* + * Interrupts are already disabled, so these are atomic. + */ + if (cd->desired_en) + set_c0_status(mask); + else + clear_c0_status(mask); + +} + +static void octeon_irq_core_disable(struct irq_data *data) +{ + struct octeon_core_chip_data *cd = irq_data_get_irq_chip_data(data); + cd->desired_en = false; +} + +static void octeon_irq_core_enable(struct irq_data *data) +{ + struct octeon_core_chip_data *cd = irq_data_get_irq_chip_data(data); + cd->desired_en = true; +} + +static void octeon_irq_core_bus_lock(struct irq_data *data) +{ + struct octeon_core_chip_data *cd = irq_data_get_irq_chip_data(data); + + mutex_lock(&cd->core_irq_mutex); +} + +static void octeon_irq_core_bus_sync_unlock(struct irq_data *data) +{ + struct octeon_core_chip_data *cd = irq_data_get_irq_chip_data(data); + + if (cd->desired_en != cd->current_en) { + on_each_cpu(octeon_irq_core_set_enable_local, data, 1); + + cd->current_en = cd->desired_en; + } + + mutex_unlock(&cd->core_irq_mutex); +} + +static struct irq_chip octeon_irq_chip_core = { + .name = "Core", + .irq_enable = octeon_irq_core_enable, + .irq_disable = octeon_irq_core_disable, + .irq_ack = octeon_irq_core_ack, + .irq_eoi = octeon_irq_core_eoi, + .irq_bus_lock = octeon_irq_core_bus_lock, + .irq_bus_sync_unlock = octeon_irq_core_bus_sync_unlock, + + .irq_cpu_online = octeon_irq_core_eoi, + .irq_cpu_offline = octeon_irq_core_ack, + .flags = IRQCHIP_ONOFFLINE_ENABLED, +}; + +static void __init octeon_irq_init_core(void) +{ + int i; + int irq; + struct octeon_core_chip_data *cd; + + for (i = 0; i < MIPS_CORE_IRQ_LINES; i++) { + cd = &octeon_irq_core_chip_data[i]; + cd->current_en = false; + cd->desired_en = false; + cd->bit = i; + mutex_init(&cd->core_irq_mutex); + + irq = OCTEON_IRQ_SW0 + i; + irq_set_chip_data(irq, cd); + irq_set_chip_and_handler(irq, &octeon_irq_chip_core, + handle_percpu_irq); + } +} + +static int next_cpu_for_irq(struct irq_data *data) +{ + +#ifdef CONFIG_SMP + int cpu; + struct cpumask *mask = irq_data_get_affinity_mask(data); + int weight = cpumask_weight(mask); + struct octeon_ciu_chip_data *cd = irq_data_get_irq_chip_data(data); + + if (weight > 1) { + cpu = cd->current_cpu; + for (;;) { + cpu = cpumask_next(cpu, mask); + if (cpu >= nr_cpu_ids) { + cpu = -1; + continue; + } else if (cpumask_test_cpu(cpu, cpu_online_mask)) { + break; + } + } + } else if (weight == 1) { + cpu = cpumask_first(mask); + } else { + cpu = smp_processor_id(); + } + cd->current_cpu = cpu; + return cpu; +#else + return smp_processor_id(); +#endif +} + +static void octeon_irq_ciu_enable(struct irq_data *data) +{ + int cpu = next_cpu_for_irq(data); + int coreid = octeon_coreid_for_cpu(cpu); + unsigned long *pen; + unsigned long flags; + struct octeon_ciu_chip_data *cd; + raw_spinlock_t *lock = &per_cpu(octeon_irq_ciu_spinlock, cpu); + + cd = irq_data_get_irq_chip_data(data); + + raw_spin_lock_irqsave(lock, flags); + if (cd->line == 0) { + pen = &per_cpu(octeon_irq_ciu0_en_mirror, cpu); + __set_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), *pen); + } else { + pen = &per_cpu(octeon_irq_ciu1_en_mirror, cpu); + __set_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), *pen); + } + raw_spin_unlock_irqrestore(lock, flags); +} + +static void octeon_irq_ciu_enable_local(struct irq_data *data) +{ + unsigned long *pen; + unsigned long flags; + struct octeon_ciu_chip_data *cd; + raw_spinlock_t *lock = this_cpu_ptr(&octeon_irq_ciu_spinlock); + + cd = irq_data_get_irq_chip_data(data); + + raw_spin_lock_irqsave(lock, flags); + if (cd->line == 0) { + pen = this_cpu_ptr(&octeon_irq_ciu0_en_mirror); + __set_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + cvmx_write_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2), *pen); + } else { + pen = this_cpu_ptr(&octeon_irq_ciu1_en_mirror); + __set_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + cvmx_write_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1), *pen); + } + raw_spin_unlock_irqrestore(lock, flags); +} + +static void octeon_irq_ciu_disable_local(struct irq_data *data) +{ + unsigned long *pen; + unsigned long flags; + struct octeon_ciu_chip_data *cd; + raw_spinlock_t *lock = this_cpu_ptr(&octeon_irq_ciu_spinlock); + + cd = irq_data_get_irq_chip_data(data); + + raw_spin_lock_irqsave(lock, flags); + if (cd->line == 0) { + pen = this_cpu_ptr(&octeon_irq_ciu0_en_mirror); + __clear_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + cvmx_write_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2), *pen); + } else { + pen = this_cpu_ptr(&octeon_irq_ciu1_en_mirror); + __clear_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + cvmx_write_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1), *pen); + } + raw_spin_unlock_irqrestore(lock, flags); +} + +static void octeon_irq_ciu_disable_all(struct irq_data *data) +{ + unsigned long flags; + unsigned long *pen; + int cpu; + struct octeon_ciu_chip_data *cd; + raw_spinlock_t *lock; + + cd = irq_data_get_irq_chip_data(data); + + for_each_online_cpu(cpu) { + int coreid = octeon_coreid_for_cpu(cpu); + lock = &per_cpu(octeon_irq_ciu_spinlock, cpu); + if (cd->line == 0) + pen = &per_cpu(octeon_irq_ciu0_en_mirror, cpu); + else + pen = &per_cpu(octeon_irq_ciu1_en_mirror, cpu); + + raw_spin_lock_irqsave(lock, flags); + __clear_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + if (cd->line == 0) + cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), *pen); + else + cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), *pen); + raw_spin_unlock_irqrestore(lock, flags); + } +} + +static void octeon_irq_ciu_enable_all(struct irq_data *data) +{ + unsigned long flags; + unsigned long *pen; + int cpu; + struct octeon_ciu_chip_data *cd; + raw_spinlock_t *lock; + + cd = irq_data_get_irq_chip_data(data); + + for_each_online_cpu(cpu) { + int coreid = octeon_coreid_for_cpu(cpu); + lock = &per_cpu(octeon_irq_ciu_spinlock, cpu); + if (cd->line == 0) + pen = &per_cpu(octeon_irq_ciu0_en_mirror, cpu); + else + pen = &per_cpu(octeon_irq_ciu1_en_mirror, cpu); + + raw_spin_lock_irqsave(lock, flags); + __set_bit(cd->bit, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + if (cd->line == 0) + cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), *pen); + else + cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), *pen); + raw_spin_unlock_irqrestore(lock, flags); + } +} + +/* + * Enable the irq on the next core in the affinity set for chips that + * have the EN*_W1{S,C} registers. + */ +static void octeon_irq_ciu_enable_v2(struct irq_data *data) +{ + u64 mask; + int cpu = next_cpu_for_irq(data); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + /* + * Called under the desc lock, so these should never get out + * of sync. + */ + if (cd->line == 0) { + int index = octeon_coreid_for_cpu(cpu) * 2; + set_bit(cd->bit, &per_cpu(octeon_irq_ciu0_en_mirror, cpu)); + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); + } else { + int index = octeon_coreid_for_cpu(cpu) * 2 + 1; + set_bit(cd->bit, &per_cpu(octeon_irq_ciu1_en_mirror, cpu)); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); + } +} + +/* + * Enable the irq in the sum2 registers. + */ +static void octeon_irq_ciu_enable_sum2(struct irq_data *data) +{ + u64 mask; + int cpu = next_cpu_for_irq(data); + int index = octeon_coreid_for_cpu(cpu); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + cvmx_write_csr(CVMX_CIU_EN2_PPX_IP4_W1S(index), mask); +} + +/* + * Disable the irq in the sum2 registers. + */ +static void octeon_irq_ciu_disable_local_sum2(struct irq_data *data) +{ + u64 mask; + int cpu = next_cpu_for_irq(data); + int index = octeon_coreid_for_cpu(cpu); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + cvmx_write_csr(CVMX_CIU_EN2_PPX_IP4_W1C(index), mask); +} + +static void octeon_irq_ciu_ack_sum2(struct irq_data *data) +{ + u64 mask; + int cpu = next_cpu_for_irq(data); + int index = octeon_coreid_for_cpu(cpu); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + cvmx_write_csr(CVMX_CIU_SUM2_PPX_IP4(index), mask); +} + +static void octeon_irq_ciu_disable_all_sum2(struct irq_data *data) +{ + int cpu; + struct octeon_ciu_chip_data *cd; + u64 mask; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + for_each_online_cpu(cpu) { + int coreid = octeon_coreid_for_cpu(cpu); + + cvmx_write_csr(CVMX_CIU_EN2_PPX_IP4_W1C(coreid), mask); + } +} + +/* + * Enable the irq on the current CPU for chips that + * have the EN*_W1{S,C} registers. + */ +static void octeon_irq_ciu_enable_local_v2(struct irq_data *data) +{ + u64 mask; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + if (cd->line == 0) { + int index = cvmx_get_core_num() * 2; + set_bit(cd->bit, this_cpu_ptr(&octeon_irq_ciu0_en_mirror)); + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); + } else { + int index = cvmx_get_core_num() * 2 + 1; + set_bit(cd->bit, this_cpu_ptr(&octeon_irq_ciu1_en_mirror)); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); + } +} + +static void octeon_irq_ciu_disable_local_v2(struct irq_data *data) +{ + u64 mask; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + if (cd->line == 0) { + int index = cvmx_get_core_num() * 2; + clear_bit(cd->bit, this_cpu_ptr(&octeon_irq_ciu0_en_mirror)); + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); + } else { + int index = cvmx_get_core_num() * 2 + 1; + clear_bit(cd->bit, this_cpu_ptr(&octeon_irq_ciu1_en_mirror)); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); + } +} + +/* + * Write to the W1C bit in CVMX_CIU_INTX_SUM0 to clear the irq. + */ +static void octeon_irq_ciu_ack(struct irq_data *data) +{ + u64 mask; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + if (cd->line == 0) { + int index = cvmx_get_core_num() * 2; + cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask); + } else { + cvmx_write_csr(CVMX_CIU_INT_SUM1, mask); + } +} + +/* + * Disable the irq on the all cores for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu_disable_all_v2(struct irq_data *data) +{ + int cpu; + u64 mask; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + if (cd->line == 0) { + for_each_online_cpu(cpu) { + int index = octeon_coreid_for_cpu(cpu) * 2; + clear_bit(cd->bit, + &per_cpu(octeon_irq_ciu0_en_mirror, cpu)); + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); + } + } else { + for_each_online_cpu(cpu) { + int index = octeon_coreid_for_cpu(cpu) * 2 + 1; + clear_bit(cd->bit, + &per_cpu(octeon_irq_ciu1_en_mirror, cpu)); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); + } + } +} + +/* + * Enable the irq on the all cores for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu_enable_all_v2(struct irq_data *data) +{ + int cpu; + u64 mask; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + if (cd->line == 0) { + for_each_online_cpu(cpu) { + int index = octeon_coreid_for_cpu(cpu) * 2; + set_bit(cd->bit, + &per_cpu(octeon_irq_ciu0_en_mirror, cpu)); + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); + } + } else { + for_each_online_cpu(cpu) { + int index = octeon_coreid_for_cpu(cpu) * 2 + 1; + set_bit(cd->bit, + &per_cpu(octeon_irq_ciu1_en_mirror, cpu)); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); + } + } +} + +static int octeon_irq_ciu_set_type(struct irq_data *data, unsigned int t) +{ + irqd_set_trigger_type(data, t); + + if (t & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(data, handle_edge_irq); + else + irq_set_handler_locked(data, handle_level_irq); + + return IRQ_SET_MASK_OK; +} + +static void octeon_irq_gpio_setup(struct irq_data *data) +{ + union cvmx_gpio_bit_cfgx cfg; + struct octeon_ciu_chip_data *cd; + u32 t = irqd_get_trigger_type(data); + + cd = irq_data_get_irq_chip_data(data); + + cfg.u64 = 0; + cfg.s.int_en = 1; + cfg.s.int_type = (t & IRQ_TYPE_EDGE_BOTH) != 0; + cfg.s.rx_xor = (t & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING)) != 0; + + /* 140 nS glitch filter*/ + cfg.s.fil_cnt = 7; + cfg.s.fil_sel = 3; + + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(cd->gpio_line), cfg.u64); +} + +static void octeon_irq_ciu_enable_gpio_v2(struct irq_data *data) +{ + octeon_irq_gpio_setup(data); + octeon_irq_ciu_enable_v2(data); +} + +static void octeon_irq_ciu_enable_gpio(struct irq_data *data) +{ + octeon_irq_gpio_setup(data); + octeon_irq_ciu_enable(data); +} + +static int octeon_irq_ciu_gpio_set_type(struct irq_data *data, unsigned int t) +{ + irqd_set_trigger_type(data, t); + octeon_irq_gpio_setup(data); + + if (t & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(data, handle_edge_irq); + else + irq_set_handler_locked(data, handle_level_irq); + + return IRQ_SET_MASK_OK; +} + +static void octeon_irq_ciu_disable_gpio_v2(struct irq_data *data) +{ + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(cd->gpio_line), 0); + + octeon_irq_ciu_disable_all_v2(data); +} + +static void octeon_irq_ciu_disable_gpio(struct irq_data *data) +{ + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(cd->gpio_line), 0); + + octeon_irq_ciu_disable_all(data); +} + +static void octeon_irq_ciu_gpio_ack(struct irq_data *data) +{ + struct octeon_ciu_chip_data *cd; + u64 mask; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->gpio_line); + + cvmx_write_csr(CVMX_GPIO_INT_CLR, mask); +} + +#ifdef CONFIG_SMP + +static void octeon_irq_cpu_offline_ciu(struct irq_data *data) +{ + int cpu = smp_processor_id(); + cpumask_t new_affinity; + struct cpumask *mask = irq_data_get_affinity_mask(data); + + if (!cpumask_test_cpu(cpu, mask)) + return; + + if (cpumask_weight(mask) > 1) { + /* + * It has multi CPU affinity, just remove this CPU + * from the affinity set. + */ + cpumask_copy(&new_affinity, mask); + cpumask_clear_cpu(cpu, &new_affinity); + } else { + /* Otherwise, put it on lowest numbered online CPU. */ + cpumask_clear(&new_affinity); + cpumask_set_cpu(cpumask_first(cpu_online_mask), &new_affinity); + } + irq_set_affinity_locked(data, &new_affinity, false); +} + +static int octeon_irq_ciu_set_affinity(struct irq_data *data, + const struct cpumask *dest, bool force) +{ + int cpu; + bool enable_one = !irqd_irq_disabled(data) && !irqd_irq_masked(data); + unsigned long flags; + struct octeon_ciu_chip_data *cd; + unsigned long *pen; + raw_spinlock_t *lock; + + cd = irq_data_get_irq_chip_data(data); + + /* + * For non-v2 CIU, we will allow only single CPU affinity. + * This removes the need to do locking in the .ack/.eoi + * functions. + */ + if (cpumask_weight(dest) != 1) + return -EINVAL; + + if (!enable_one) + return 0; + + + for_each_online_cpu(cpu) { + int coreid = octeon_coreid_for_cpu(cpu); + + lock = &per_cpu(octeon_irq_ciu_spinlock, cpu); + raw_spin_lock_irqsave(lock, flags); + + if (cd->line == 0) + pen = &per_cpu(octeon_irq_ciu0_en_mirror, cpu); + else + pen = &per_cpu(octeon_irq_ciu1_en_mirror, cpu); + + if (cpumask_test_cpu(cpu, dest) && enable_one) { + enable_one = false; + __set_bit(cd->bit, pen); + } else { + __clear_bit(cd->bit, pen); + } + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before + * enabling the irq. + */ + wmb(); + + if (cd->line == 0) + cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), *pen); + else + cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), *pen); + + raw_spin_unlock_irqrestore(lock, flags); + } + return 0; +} + +/* + * Set affinity for the irq for chips that have the EN*_W1{S,C} + * registers. + */ +static int octeon_irq_ciu_set_affinity_v2(struct irq_data *data, + const struct cpumask *dest, + bool force) +{ + int cpu; + bool enable_one = !irqd_irq_disabled(data) && !irqd_irq_masked(data); + u64 mask; + struct octeon_ciu_chip_data *cd; + + if (!enable_one) + return 0; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << cd->bit; + + if (cd->line == 0) { + for_each_online_cpu(cpu) { + unsigned long *pen = &per_cpu(octeon_irq_ciu0_en_mirror, cpu); + int index = octeon_coreid_for_cpu(cpu) * 2; + if (cpumask_test_cpu(cpu, dest) && enable_one) { + enable_one = false; + set_bit(cd->bit, pen); + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); + } else { + clear_bit(cd->bit, pen); + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); + } + } + } else { + for_each_online_cpu(cpu) { + unsigned long *pen = &per_cpu(octeon_irq_ciu1_en_mirror, cpu); + int index = octeon_coreid_for_cpu(cpu) * 2 + 1; + if (cpumask_test_cpu(cpu, dest) && enable_one) { + enable_one = false; + set_bit(cd->bit, pen); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); + } else { + clear_bit(cd->bit, pen); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); + } + } + } + return 0; +} + +static int octeon_irq_ciu_set_affinity_sum2(struct irq_data *data, + const struct cpumask *dest, + bool force) +{ + int cpu; + bool enable_one = !irqd_irq_disabled(data) && !irqd_irq_masked(data); + u64 mask; + struct octeon_ciu_chip_data *cd; + + if (!enable_one) + return 0; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << cd->bit; + + for_each_online_cpu(cpu) { + int index = octeon_coreid_for_cpu(cpu); + + if (cpumask_test_cpu(cpu, dest) && enable_one) { + enable_one = false; + cvmx_write_csr(CVMX_CIU_EN2_PPX_IP4_W1S(index), mask); + } else { + cvmx_write_csr(CVMX_CIU_EN2_PPX_IP4_W1C(index), mask); + } + } + return 0; +} +#endif + +static unsigned int edge_startup(struct irq_data *data) +{ + /* ack any pending edge-irq at startup, so there is + * an _edge_ to fire on when the event reappears. + */ + data->chip->irq_ack(data); + data->chip->irq_enable(data); + return 0; +} + +/* + * Newer octeon chips have support for lockless CIU operation. + */ +static struct irq_chip octeon_irq_chip_ciu_v2 = { + .name = "CIU", + .irq_enable = octeon_irq_ciu_enable_v2, + .irq_disable = octeon_irq_ciu_disable_all_v2, + .irq_mask = octeon_irq_ciu_disable_local_v2, + .irq_unmask = octeon_irq_ciu_enable_v2, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity_v2, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +static struct irq_chip octeon_irq_chip_ciu_v2_edge = { + .name = "CIU", + .irq_enable = octeon_irq_ciu_enable_v2, + .irq_disable = octeon_irq_ciu_disable_all_v2, + .irq_ack = octeon_irq_ciu_ack, + .irq_mask = octeon_irq_ciu_disable_local_v2, + .irq_unmask = octeon_irq_ciu_enable_v2, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity_v2, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +/* + * Newer octeon chips have support for lockless CIU operation. + */ +static struct irq_chip octeon_irq_chip_ciu_sum2 = { + .name = "CIU", + .irq_enable = octeon_irq_ciu_enable_sum2, + .irq_disable = octeon_irq_ciu_disable_all_sum2, + .irq_mask = octeon_irq_ciu_disable_local_sum2, + .irq_unmask = octeon_irq_ciu_enable_sum2, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity_sum2, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +static struct irq_chip octeon_irq_chip_ciu_sum2_edge = { + .name = "CIU", + .irq_enable = octeon_irq_ciu_enable_sum2, + .irq_disable = octeon_irq_ciu_disable_all_sum2, + .irq_ack = octeon_irq_ciu_ack_sum2, + .irq_mask = octeon_irq_ciu_disable_local_sum2, + .irq_unmask = octeon_irq_ciu_enable_sum2, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity_sum2, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +static struct irq_chip octeon_irq_chip_ciu = { + .name = "CIU", + .irq_enable = octeon_irq_ciu_enable, + .irq_disable = octeon_irq_ciu_disable_all, + .irq_mask = octeon_irq_ciu_disable_local, + .irq_unmask = octeon_irq_ciu_enable, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +static struct irq_chip octeon_irq_chip_ciu_edge = { + .name = "CIU", + .irq_enable = octeon_irq_ciu_enable, + .irq_disable = octeon_irq_ciu_disable_all, + .irq_ack = octeon_irq_ciu_ack, + .irq_mask = octeon_irq_ciu_disable_local, + .irq_unmask = octeon_irq_ciu_enable, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +/* The mbox versions don't do any affinity or round-robin. */ +static struct irq_chip octeon_irq_chip_ciu_mbox_v2 = { + .name = "CIU-M", + .irq_enable = octeon_irq_ciu_enable_all_v2, + .irq_disable = octeon_irq_ciu_disable_all_v2, + .irq_ack = octeon_irq_ciu_disable_local_v2, + .irq_eoi = octeon_irq_ciu_enable_local_v2, + + .irq_cpu_online = octeon_irq_ciu_enable_local_v2, + .irq_cpu_offline = octeon_irq_ciu_disable_local_v2, + .flags = IRQCHIP_ONOFFLINE_ENABLED, +}; + +static struct irq_chip octeon_irq_chip_ciu_mbox = { + .name = "CIU-M", + .irq_enable = octeon_irq_ciu_enable_all, + .irq_disable = octeon_irq_ciu_disable_all, + .irq_ack = octeon_irq_ciu_disable_local, + .irq_eoi = octeon_irq_ciu_enable_local, + + .irq_cpu_online = octeon_irq_ciu_enable_local, + .irq_cpu_offline = octeon_irq_ciu_disable_local, + .flags = IRQCHIP_ONOFFLINE_ENABLED, +}; + +static struct irq_chip octeon_irq_chip_ciu_gpio_v2 = { + .name = "CIU-GPIO", + .irq_enable = octeon_irq_ciu_enable_gpio_v2, + .irq_disable = octeon_irq_ciu_disable_gpio_v2, + .irq_ack = octeon_irq_ciu_gpio_ack, + .irq_mask = octeon_irq_ciu_disable_local_v2, + .irq_unmask = octeon_irq_ciu_enable_v2, + .irq_set_type = octeon_irq_ciu_gpio_set_type, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity_v2, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif + .flags = IRQCHIP_SET_TYPE_MASKED, +}; + +static struct irq_chip octeon_irq_chip_ciu_gpio = { + .name = "CIU-GPIO", + .irq_enable = octeon_irq_ciu_enable_gpio, + .irq_disable = octeon_irq_ciu_disable_gpio, + .irq_mask = octeon_irq_ciu_disable_local, + .irq_unmask = octeon_irq_ciu_enable, + .irq_ack = octeon_irq_ciu_gpio_ack, + .irq_set_type = octeon_irq_ciu_gpio_set_type, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif + .flags = IRQCHIP_SET_TYPE_MASKED, +}; + +/* + * Watchdog interrupts are special. They are associated with a single + * core, so we hardwire the affinity to that core. + */ +static void octeon_irq_ciu_wd_enable(struct irq_data *data) +{ + unsigned long flags; + unsigned long *pen; + int coreid = data->irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ + int cpu = octeon_cpu_for_coreid(coreid); + raw_spinlock_t *lock = &per_cpu(octeon_irq_ciu_spinlock, cpu); + + raw_spin_lock_irqsave(lock, flags); + pen = &per_cpu(octeon_irq_ciu1_en_mirror, cpu); + __set_bit(coreid, pen); + /* + * Must be visible to octeon_irq_ip{2,3}_ciu() before enabling + * the irq. + */ + wmb(); + cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), *pen); + raw_spin_unlock_irqrestore(lock, flags); +} + +/* + * Watchdog interrupts are special. They are associated with a single + * core, so we hardwire the affinity to that core. + */ +static void octeon_irq_ciu1_wd_enable_v2(struct irq_data *data) +{ + int coreid = data->irq - OCTEON_IRQ_WDOG0; + int cpu = octeon_cpu_for_coreid(coreid); + + set_bit(coreid, &per_cpu(octeon_irq_ciu1_en_mirror, cpu)); + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(coreid * 2 + 1), 1ull << coreid); +} + + +static struct irq_chip octeon_irq_chip_ciu_wd_v2 = { + .name = "CIU-W", + .irq_enable = octeon_irq_ciu1_wd_enable_v2, + .irq_disable = octeon_irq_ciu_disable_all_v2, + .irq_mask = octeon_irq_ciu_disable_local_v2, + .irq_unmask = octeon_irq_ciu_enable_local_v2, +}; + +static struct irq_chip octeon_irq_chip_ciu_wd = { + .name = "CIU-W", + .irq_enable = octeon_irq_ciu_wd_enable, + .irq_disable = octeon_irq_ciu_disable_all, + .irq_mask = octeon_irq_ciu_disable_local, + .irq_unmask = octeon_irq_ciu_enable_local, +}; + +static bool octeon_irq_ciu_is_edge(unsigned int line, unsigned int bit) +{ + bool edge = false; + + if (line == 0) + switch (bit) { + case 48 ... 49: /* GMX DRP */ + case 50: /* IPD_DRP */ + case 52 ... 55: /* Timers */ + case 58: /* MPI */ + edge = true; + break; + default: + break; + } + else /* line == 1 */ + switch (bit) { + case 47: /* PTP */ + edge = true; + break; + default: + break; + } + return edge; +} + +struct octeon_irq_gpio_domain_data { + unsigned int base_hwirq; +}; + +static int octeon_irq_gpio_xlat(struct irq_domain *d, + struct device_node *node, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + unsigned int type; + unsigned int pin; + unsigned int trigger; + + if (irq_domain_get_of_node(d) != node) + return -EINVAL; + + if (intsize < 2) + return -EINVAL; + + pin = intspec[0]; + if (pin >= 16) + return -EINVAL; + + trigger = intspec[1]; + + switch (trigger) { + case 1: + type = IRQ_TYPE_EDGE_RISING; + break; + case 2: + type = IRQ_TYPE_EDGE_FALLING; + break; + case 4: + type = IRQ_TYPE_LEVEL_HIGH; + break; + case 8: + type = IRQ_TYPE_LEVEL_LOW; + break; + default: + pr_err("Error: (%s) Invalid irq trigger specification: %x\n", + node->name, + trigger); + type = IRQ_TYPE_LEVEL_LOW; + break; + } + *out_type = type; + *out_hwirq = pin; + + return 0; +} + +static int octeon_irq_ciu_xlat(struct irq_domain *d, + struct device_node *node, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + unsigned int ciu, bit; + struct octeon_irq_ciu_domain_data *dd = d->host_data; + + ciu = intspec[0]; + bit = intspec[1]; + + if (ciu >= dd->num_sum || bit > 63) + return -EINVAL; + + *out_hwirq = (ciu << 6) | bit; + *out_type = 0; + + return 0; +} + +static struct irq_chip *octeon_irq_ciu_chip; +static struct irq_chip *octeon_irq_ciu_chip_edge; +static struct irq_chip *octeon_irq_gpio_chip; + +static int octeon_irq_ciu_map(struct irq_domain *d, + unsigned int virq, irq_hw_number_t hw) +{ + int rv; + unsigned int line = hw >> 6; + unsigned int bit = hw & 63; + struct octeon_irq_ciu_domain_data *dd = d->host_data; + + if (line >= dd->num_sum || octeon_irq_ciu_to_irq[line][bit] != 0) + return -EINVAL; + + if (line == 2) { + if (octeon_irq_ciu_is_edge(line, bit)) + rv = octeon_irq_set_ciu_mapping(virq, line, bit, 0, + &octeon_irq_chip_ciu_sum2_edge, + handle_edge_irq); + else + rv = octeon_irq_set_ciu_mapping(virq, line, bit, 0, + &octeon_irq_chip_ciu_sum2, + handle_level_irq); + } else { + if (octeon_irq_ciu_is_edge(line, bit)) + rv = octeon_irq_set_ciu_mapping(virq, line, bit, 0, + octeon_irq_ciu_chip_edge, + handle_edge_irq); + else + rv = octeon_irq_set_ciu_mapping(virq, line, bit, 0, + octeon_irq_ciu_chip, + handle_level_irq); + } + return rv; +} + +static int octeon_irq_gpio_map(struct irq_domain *d, + unsigned int virq, irq_hw_number_t hw) +{ + struct octeon_irq_gpio_domain_data *gpiod = d->host_data; + unsigned int line, bit; + int r; + + line = (hw + gpiod->base_hwirq) >> 6; + bit = (hw + gpiod->base_hwirq) & 63; + if (line >= ARRAY_SIZE(octeon_irq_ciu_to_irq) || + octeon_irq_ciu_to_irq[line][bit] != 0) + return -EINVAL; + + /* + * Default to handle_level_irq. If the DT contains a different + * trigger type, it will call the irq_set_type callback and + * the handler gets updated. + */ + r = octeon_irq_set_ciu_mapping(virq, line, bit, hw, + octeon_irq_gpio_chip, handle_level_irq); + return r; +} + +static struct irq_domain_ops octeon_irq_domain_ciu_ops = { + .map = octeon_irq_ciu_map, + .unmap = octeon_irq_free_cd, + .xlate = octeon_irq_ciu_xlat, +}; + +static struct irq_domain_ops octeon_irq_domain_gpio_ops = { + .map = octeon_irq_gpio_map, + .unmap = octeon_irq_free_cd, + .xlate = octeon_irq_gpio_xlat, +}; + +static void octeon_irq_ip2_ciu(void) +{ + const unsigned long core_id = cvmx_get_core_num(); + u64 ciu_sum = cvmx_read_csr(CVMX_CIU_INTX_SUM0(core_id * 2)); + + ciu_sum &= __this_cpu_read(octeon_irq_ciu0_en_mirror); + if (likely(ciu_sum)) { + int bit = fls64(ciu_sum) - 1; + int irq = octeon_irq_ciu_to_irq[0][bit]; + if (likely(irq)) + do_IRQ(irq); + else + spurious_interrupt(); + } else { + spurious_interrupt(); + } +} + +static void octeon_irq_ip3_ciu(void) +{ + u64 ciu_sum = cvmx_read_csr(CVMX_CIU_INT_SUM1); + + ciu_sum &= __this_cpu_read(octeon_irq_ciu1_en_mirror); + if (likely(ciu_sum)) { + int bit = fls64(ciu_sum) - 1; + int irq = octeon_irq_ciu_to_irq[1][bit]; + if (likely(irq)) + do_IRQ(irq); + else + spurious_interrupt(); + } else { + spurious_interrupt(); + } +} + +static void octeon_irq_ip4_ciu(void) +{ + int coreid = cvmx_get_core_num(); + u64 ciu_sum = cvmx_read_csr(CVMX_CIU_SUM2_PPX_IP4(coreid)); + u64 ciu_en = cvmx_read_csr(CVMX_CIU_EN2_PPX_IP4(coreid)); + + ciu_sum &= ciu_en; + if (likely(ciu_sum)) { + int bit = fls64(ciu_sum) - 1; + int irq = octeon_irq_ciu_to_irq[2][bit]; + + if (likely(irq)) + do_IRQ(irq); + else + spurious_interrupt(); + } else { + spurious_interrupt(); + } +} + +static bool octeon_irq_use_ip4; + +static void octeon_irq_local_enable_ip4(void *arg) +{ + set_c0_status(STATUSF_IP4); +} + +static void octeon_irq_ip4_mask(void) +{ + clear_c0_status(STATUSF_IP4); + spurious_interrupt(); +} + +static void (*octeon_irq_ip2)(void); +static void (*octeon_irq_ip3)(void); +static void (*octeon_irq_ip4)(void); + +void (*octeon_irq_setup_secondary)(void); + +void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t h) +{ + octeon_irq_ip4 = h; + octeon_irq_use_ip4 = true; + on_each_cpu(octeon_irq_local_enable_ip4, NULL, 1); +} + +static void octeon_irq_percpu_enable(void) +{ + irq_cpu_online(); +} + +static void octeon_irq_init_ciu_percpu(void) +{ + int coreid = cvmx_get_core_num(); + + + __this_cpu_write(octeon_irq_ciu0_en_mirror, 0); + __this_cpu_write(octeon_irq_ciu1_en_mirror, 0); + wmb(); + raw_spin_lock_init(this_cpu_ptr(&octeon_irq_ciu_spinlock)); + /* + * Disable All CIU Interrupts. The ones we need will be + * enabled later. Read the SUM register so we know the write + * completed. + */ + cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), 0); + cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0); + cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0); + cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0); + cvmx_read_csr(CVMX_CIU_INTX_SUM0((coreid * 2))); +} + +static void octeon_irq_init_ciu2_percpu(void) +{ + u64 regx, ipx; + int coreid = cvmx_get_core_num(); + u64 base = CVMX_CIU2_EN_PPX_IP2_WRKQ(coreid); + + /* + * Disable All CIU2 Interrupts. The ones we need will be + * enabled later. Read the SUM register so we know the write + * completed. + * + * There are 9 registers and 3 IPX levels with strides 0x1000 + * and 0x200 respectivly. Use loops to clear them. + */ + for (regx = 0; regx <= 0x8000; regx += 0x1000) { + for (ipx = 0; ipx <= 0x400; ipx += 0x200) + cvmx_write_csr(base + regx + ipx, 0); + } + + cvmx_read_csr(CVMX_CIU2_SUM_PPX_IP2(coreid)); +} + +static void octeon_irq_setup_secondary_ciu(void) +{ + octeon_irq_init_ciu_percpu(); + octeon_irq_percpu_enable(); + + /* Enable the CIU lines */ + set_c0_status(STATUSF_IP3 | STATUSF_IP2); + if (octeon_irq_use_ip4) + set_c0_status(STATUSF_IP4); + else + clear_c0_status(STATUSF_IP4); +} + +static void octeon_irq_setup_secondary_ciu2(void) +{ + octeon_irq_init_ciu2_percpu(); + octeon_irq_percpu_enable(); + + /* Enable the CIU lines */ + set_c0_status(STATUSF_IP3 | STATUSF_IP2); + if (octeon_irq_use_ip4) + set_c0_status(STATUSF_IP4); + else + clear_c0_status(STATUSF_IP4); +} + +static int __init octeon_irq_init_ciu( + struct device_node *ciu_node, struct device_node *parent) +{ + unsigned int i, r; + struct irq_chip *chip; + struct irq_chip *chip_edge; + struct irq_chip *chip_mbox; + struct irq_chip *chip_wd; + struct irq_domain *ciu_domain = NULL; + struct octeon_irq_ciu_domain_data *dd; + + dd = kzalloc(sizeof(*dd), GFP_KERNEL); + if (!dd) + return -ENOMEM; + + octeon_irq_init_ciu_percpu(); + octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu; + + octeon_irq_ip2 = octeon_irq_ip2_ciu; + octeon_irq_ip3 = octeon_irq_ip3_ciu; + if ((OCTEON_IS_OCTEON2() || OCTEON_IS_OCTEON3()) + && !OCTEON_IS_MODEL(OCTEON_CN63XX)) { + octeon_irq_ip4 = octeon_irq_ip4_ciu; + dd->num_sum = 3; + octeon_irq_use_ip4 = true; + } else { + octeon_irq_ip4 = octeon_irq_ip4_mask; + dd->num_sum = 2; + octeon_irq_use_ip4 = false; + } + if (OCTEON_IS_MODEL(OCTEON_CN58XX_PASS2_X) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) || + OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X) || + OCTEON_IS_OCTEON2() || OCTEON_IS_OCTEON3()) { + chip = &octeon_irq_chip_ciu_v2; + chip_edge = &octeon_irq_chip_ciu_v2_edge; + chip_mbox = &octeon_irq_chip_ciu_mbox_v2; + chip_wd = &octeon_irq_chip_ciu_wd_v2; + octeon_irq_gpio_chip = &octeon_irq_chip_ciu_gpio_v2; + } else { + chip = &octeon_irq_chip_ciu; + chip_edge = &octeon_irq_chip_ciu_edge; + chip_mbox = &octeon_irq_chip_ciu_mbox; + chip_wd = &octeon_irq_chip_ciu_wd; + octeon_irq_gpio_chip = &octeon_irq_chip_ciu_gpio; + } + octeon_irq_ciu_chip = chip; + octeon_irq_ciu_chip_edge = chip_edge; + + /* Mips internal */ + octeon_irq_init_core(); + + ciu_domain = irq_domain_add_tree( + ciu_node, &octeon_irq_domain_ciu_ops, dd); + irq_set_default_host(ciu_domain); + + /* CIU_0 */ + for (i = 0; i < 16; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0); + if (r) + goto err; + } + + r = octeon_irq_set_ciu_mapping( + OCTEON_IRQ_MBOX0, 0, 32, 0, chip_mbox, handle_percpu_irq); + if (r) + goto err; + r = octeon_irq_set_ciu_mapping( + OCTEON_IRQ_MBOX1, 0, 33, 0, chip_mbox, handle_percpu_irq); + if (r) + goto err; + + for (i = 0; i < 4; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36); + if (r) + goto err; + } + for (i = 0; i < 4; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40); + if (r) + goto err; + } + + r = octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_TWSI, 0, 45); + if (r) + goto err; + + r = octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46); + if (r) + goto err; + + for (i = 0; i < 4; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52); + if (r) + goto err; + } + + r = octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_TWSI2, 0, 59); + if (r) + goto err; + + /* CIU_1 */ + for (i = 0; i < 16; i++) { + r = octeon_irq_set_ciu_mapping( + i + OCTEON_IRQ_WDOG0, 1, i + 0, 0, chip_wd, + handle_level_irq); + if (r) + goto err; + } + + /* Enable the CIU lines */ + set_c0_status(STATUSF_IP3 | STATUSF_IP2); + if (octeon_irq_use_ip4) + set_c0_status(STATUSF_IP4); + else + clear_c0_status(STATUSF_IP4); + + return 0; +err: + return r; +} + +static int __init octeon_irq_init_gpio( + struct device_node *gpio_node, struct device_node *parent) +{ + struct octeon_irq_gpio_domain_data *gpiod; + u32 interrupt_cells; + unsigned int base_hwirq; + int r; + + r = of_property_read_u32(parent, "#interrupt-cells", &interrupt_cells); + if (r) + return r; + + if (interrupt_cells == 1) { + u32 v; + + r = of_property_read_u32_index(gpio_node, "interrupts", 0, &v); + if (r) { + pr_warn("No \"interrupts\" property.\n"); + return r; + } + base_hwirq = v; + } else if (interrupt_cells == 2) { + u32 v0, v1; + + r = of_property_read_u32_index(gpio_node, "interrupts", 0, &v0); + if (r) { + pr_warn("No \"interrupts\" property.\n"); + return r; + } + r = of_property_read_u32_index(gpio_node, "interrupts", 1, &v1); + if (r) { + pr_warn("No \"interrupts\" property.\n"); + return r; + } + base_hwirq = (v0 << 6) | v1; + } else { + pr_warn("Bad \"#interrupt-cells\" property: %u\n", + interrupt_cells); + return -EINVAL; + } + + gpiod = kzalloc(sizeof(*gpiod), GFP_KERNEL); + if (gpiod) { + /* gpio domain host_data is the base hwirq number. */ + gpiod->base_hwirq = base_hwirq; + irq_domain_add_linear( + gpio_node, 16, &octeon_irq_domain_gpio_ops, gpiod); + } else { + pr_warn("Cannot allocate memory for GPIO irq_domain.\n"); + return -ENOMEM; + } + + /* + * Clear the OF_POPULATED flag that was set by of_irq_init() + * so that all GPIO devices will be probed. + */ + of_node_clear_flag(gpio_node, OF_POPULATED); + + return 0; +} +/* + * Watchdog interrupts are special. They are associated with a single + * core, so we hardwire the affinity to that core. + */ +static void octeon_irq_ciu2_wd_enable(struct irq_data *data) +{ + u64 mask; + u64 en_addr; + int coreid = data->irq - OCTEON_IRQ_WDOG0; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + en_addr = CVMX_CIU2_EN_PPX_IP2_WRKQ_W1S(coreid) + + (0x1000ull * cd->line); + cvmx_write_csr(en_addr, mask); + +} + +static void octeon_irq_ciu2_enable(struct irq_data *data) +{ + u64 mask; + u64 en_addr; + int cpu = next_cpu_for_irq(data); + int coreid = octeon_coreid_for_cpu(cpu); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + en_addr = CVMX_CIU2_EN_PPX_IP2_WRKQ_W1S(coreid) + + (0x1000ull * cd->line); + cvmx_write_csr(en_addr, mask); +} + +static void octeon_irq_ciu2_enable_local(struct irq_data *data) +{ + u64 mask; + u64 en_addr; + int coreid = cvmx_get_core_num(); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + en_addr = CVMX_CIU2_EN_PPX_IP2_WRKQ_W1S(coreid) + + (0x1000ull * cd->line); + cvmx_write_csr(en_addr, mask); + +} + +static void octeon_irq_ciu2_disable_local(struct irq_data *data) +{ + u64 mask; + u64 en_addr; + int coreid = cvmx_get_core_num(); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + en_addr = CVMX_CIU2_EN_PPX_IP2_WRKQ_W1C(coreid) + + (0x1000ull * cd->line); + cvmx_write_csr(en_addr, mask); + +} + +static void octeon_irq_ciu2_ack(struct irq_data *data) +{ + u64 mask; + u64 en_addr; + int coreid = cvmx_get_core_num(); + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + en_addr = CVMX_CIU2_RAW_PPX_IP2_WRKQ(coreid) + (0x1000ull * cd->line); + cvmx_write_csr(en_addr, mask); + +} + +static void octeon_irq_ciu2_disable_all(struct irq_data *data) +{ + int cpu; + u64 mask; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << (cd->bit); + + for_each_online_cpu(cpu) { + u64 en_addr = CVMX_CIU2_EN_PPX_IP2_WRKQ_W1C( + octeon_coreid_for_cpu(cpu)) + (0x1000ull * cd->line); + cvmx_write_csr(en_addr, mask); + } +} + +static void octeon_irq_ciu2_mbox_enable_all(struct irq_data *data) +{ + int cpu; + u64 mask; + + mask = 1ull << (data->irq - OCTEON_IRQ_MBOX0); + + for_each_online_cpu(cpu) { + u64 en_addr = CVMX_CIU2_EN_PPX_IP3_MBOX_W1S( + octeon_coreid_for_cpu(cpu)); + cvmx_write_csr(en_addr, mask); + } +} + +static void octeon_irq_ciu2_mbox_disable_all(struct irq_data *data) +{ + int cpu; + u64 mask; + + mask = 1ull << (data->irq - OCTEON_IRQ_MBOX0); + + for_each_online_cpu(cpu) { + u64 en_addr = CVMX_CIU2_EN_PPX_IP3_MBOX_W1C( + octeon_coreid_for_cpu(cpu)); + cvmx_write_csr(en_addr, mask); + } +} + +static void octeon_irq_ciu2_mbox_enable_local(struct irq_data *data) +{ + u64 mask; + u64 en_addr; + int coreid = cvmx_get_core_num(); + + mask = 1ull << (data->irq - OCTEON_IRQ_MBOX0); + en_addr = CVMX_CIU2_EN_PPX_IP3_MBOX_W1S(coreid); + cvmx_write_csr(en_addr, mask); +} + +static void octeon_irq_ciu2_mbox_disable_local(struct irq_data *data) +{ + u64 mask; + u64 en_addr; + int coreid = cvmx_get_core_num(); + + mask = 1ull << (data->irq - OCTEON_IRQ_MBOX0); + en_addr = CVMX_CIU2_EN_PPX_IP3_MBOX_W1C(coreid); + cvmx_write_csr(en_addr, mask); +} + +#ifdef CONFIG_SMP +static int octeon_irq_ciu2_set_affinity(struct irq_data *data, + const struct cpumask *dest, bool force) +{ + int cpu; + bool enable_one = !irqd_irq_disabled(data) && !irqd_irq_masked(data); + u64 mask; + struct octeon_ciu_chip_data *cd; + + if (!enable_one) + return 0; + + cd = irq_data_get_irq_chip_data(data); + mask = 1ull << cd->bit; + + for_each_online_cpu(cpu) { + u64 en_addr; + if (cpumask_test_cpu(cpu, dest) && enable_one) { + enable_one = false; + en_addr = CVMX_CIU2_EN_PPX_IP2_WRKQ_W1S( + octeon_coreid_for_cpu(cpu)) + + (0x1000ull * cd->line); + } else { + en_addr = CVMX_CIU2_EN_PPX_IP2_WRKQ_W1C( + octeon_coreid_for_cpu(cpu)) + + (0x1000ull * cd->line); + } + cvmx_write_csr(en_addr, mask); + } + + return 0; +} +#endif + +static void octeon_irq_ciu2_enable_gpio(struct irq_data *data) +{ + octeon_irq_gpio_setup(data); + octeon_irq_ciu2_enable(data); +} + +static void octeon_irq_ciu2_disable_gpio(struct irq_data *data) +{ + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(cd->gpio_line), 0); + + octeon_irq_ciu2_disable_all(data); +} + +static struct irq_chip octeon_irq_chip_ciu2 = { + .name = "CIU2-E", + .irq_enable = octeon_irq_ciu2_enable, + .irq_disable = octeon_irq_ciu2_disable_all, + .irq_mask = octeon_irq_ciu2_disable_local, + .irq_unmask = octeon_irq_ciu2_enable, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu2_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +static struct irq_chip octeon_irq_chip_ciu2_edge = { + .name = "CIU2-E", + .irq_enable = octeon_irq_ciu2_enable, + .irq_disable = octeon_irq_ciu2_disable_all, + .irq_ack = octeon_irq_ciu2_ack, + .irq_mask = octeon_irq_ciu2_disable_local, + .irq_unmask = octeon_irq_ciu2_enable, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu2_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +static struct irq_chip octeon_irq_chip_ciu2_mbox = { + .name = "CIU2-M", + .irq_enable = octeon_irq_ciu2_mbox_enable_all, + .irq_disable = octeon_irq_ciu2_mbox_disable_all, + .irq_ack = octeon_irq_ciu2_mbox_disable_local, + .irq_eoi = octeon_irq_ciu2_mbox_enable_local, + + .irq_cpu_online = octeon_irq_ciu2_mbox_enable_local, + .irq_cpu_offline = octeon_irq_ciu2_mbox_disable_local, + .flags = IRQCHIP_ONOFFLINE_ENABLED, +}; + +static struct irq_chip octeon_irq_chip_ciu2_wd = { + .name = "CIU2-W", + .irq_enable = octeon_irq_ciu2_wd_enable, + .irq_disable = octeon_irq_ciu2_disable_all, + .irq_mask = octeon_irq_ciu2_disable_local, + .irq_unmask = octeon_irq_ciu2_enable_local, +}; + +static struct irq_chip octeon_irq_chip_ciu2_gpio = { + .name = "CIU-GPIO", + .irq_enable = octeon_irq_ciu2_enable_gpio, + .irq_disable = octeon_irq_ciu2_disable_gpio, + .irq_ack = octeon_irq_ciu_gpio_ack, + .irq_mask = octeon_irq_ciu2_disable_local, + .irq_unmask = octeon_irq_ciu2_enable, + .irq_set_type = octeon_irq_ciu_gpio_set_type, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu2_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif + .flags = IRQCHIP_SET_TYPE_MASKED, +}; + +static int octeon_irq_ciu2_xlat(struct irq_domain *d, + struct device_node *node, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + unsigned int ciu, bit; + + ciu = intspec[0]; + bit = intspec[1]; + + *out_hwirq = (ciu << 6) | bit; + *out_type = 0; + + return 0; +} + +static bool octeon_irq_ciu2_is_edge(unsigned int line, unsigned int bit) +{ + bool edge = false; + + if (line == 3) /* MIO */ + switch (bit) { + case 2: /* IPD_DRP */ + case 8 ... 11: /* Timers */ + case 48: /* PTP */ + edge = true; + break; + default: + break; + } + else if (line == 6) /* PKT */ + switch (bit) { + case 52 ... 53: /* ILK_DRP */ + case 8 ... 12: /* GMX_DRP */ + edge = true; + break; + default: + break; + } + return edge; +} + +static int octeon_irq_ciu2_map(struct irq_domain *d, + unsigned int virq, irq_hw_number_t hw) +{ + unsigned int line = hw >> 6; + unsigned int bit = hw & 63; + + /* + * Don't map irq if it is reserved for GPIO. + * (Line 7 are the GPIO lines.) + */ + if (line == 7) + return 0; + + if (line > 7 || octeon_irq_ciu_to_irq[line][bit] != 0) + return -EINVAL; + + if (octeon_irq_ciu2_is_edge(line, bit)) + octeon_irq_set_ciu_mapping(virq, line, bit, 0, + &octeon_irq_chip_ciu2_edge, + handle_edge_irq); + else + octeon_irq_set_ciu_mapping(virq, line, bit, 0, + &octeon_irq_chip_ciu2, + handle_level_irq); + + return 0; +} + +static struct irq_domain_ops octeon_irq_domain_ciu2_ops = { + .map = octeon_irq_ciu2_map, + .unmap = octeon_irq_free_cd, + .xlate = octeon_irq_ciu2_xlat, +}; + +static void octeon_irq_ciu2(void) +{ + int line; + int bit; + int irq; + u64 src_reg, src, sum; + const unsigned long core_id = cvmx_get_core_num(); + + sum = cvmx_read_csr(CVMX_CIU2_SUM_PPX_IP2(core_id)) & 0xfful; + + if (unlikely(!sum)) + goto spurious; + + line = fls64(sum) - 1; + src_reg = CVMX_CIU2_SRC_PPX_IP2_WRKQ(core_id) + (0x1000 * line); + src = cvmx_read_csr(src_reg); + + if (unlikely(!src)) + goto spurious; + + bit = fls64(src) - 1; + irq = octeon_irq_ciu_to_irq[line][bit]; + if (unlikely(!irq)) + goto spurious; + + do_IRQ(irq); + goto out; + +spurious: + spurious_interrupt(); +out: + /* CN68XX pass 1.x has an errata that accessing the ACK registers + can stop interrupts from propagating */ + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + cvmx_read_csr(CVMX_CIU2_INTR_CIU_READY); + else + cvmx_read_csr(CVMX_CIU2_ACK_PPX_IP2(core_id)); + return; +} + +static void octeon_irq_ciu2_mbox(void) +{ + int line; + + const unsigned long core_id = cvmx_get_core_num(); + u64 sum = cvmx_read_csr(CVMX_CIU2_SUM_PPX_IP3(core_id)) >> 60; + + if (unlikely(!sum)) + goto spurious; + + line = fls64(sum) - 1; + + do_IRQ(OCTEON_IRQ_MBOX0 + line); + goto out; + +spurious: + spurious_interrupt(); +out: + /* CN68XX pass 1.x has an errata that accessing the ACK registers + can stop interrupts from propagating */ + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + cvmx_read_csr(CVMX_CIU2_INTR_CIU_READY); + else + cvmx_read_csr(CVMX_CIU2_ACK_PPX_IP3(core_id)); + return; +} + +static int __init octeon_irq_init_ciu2( + struct device_node *ciu_node, struct device_node *parent) +{ + unsigned int i, r; + struct irq_domain *ciu_domain = NULL; + + octeon_irq_init_ciu2_percpu(); + octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu2; + + octeon_irq_gpio_chip = &octeon_irq_chip_ciu2_gpio; + octeon_irq_ip2 = octeon_irq_ciu2; + octeon_irq_ip3 = octeon_irq_ciu2_mbox; + octeon_irq_ip4 = octeon_irq_ip4_mask; + + /* Mips internal */ + octeon_irq_init_core(); + + ciu_domain = irq_domain_add_tree( + ciu_node, &octeon_irq_domain_ciu2_ops, NULL); + irq_set_default_host(ciu_domain); + + /* CUI2 */ + for (i = 0; i < 64; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i); + if (r) + goto err; + } + + for (i = 0; i < 32; i++) { + r = octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i, 0, + &octeon_irq_chip_ciu2_wd, handle_level_irq); + if (r) + goto err; + } + + for (i = 0; i < 4; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_TIMER0, 3, i + 8); + if (r) + goto err; + } + + for (i = 0; i < 4; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_PCI_INT0, 4, i); + if (r) + goto err; + } + + for (i = 0; i < 4; i++) { + r = octeon_irq_force_ciu_mapping( + ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 4, i + 8); + if (r) + goto err; + } + + irq_set_chip_and_handler(OCTEON_IRQ_MBOX0, &octeon_irq_chip_ciu2_mbox, handle_percpu_irq); + irq_set_chip_and_handler(OCTEON_IRQ_MBOX1, &octeon_irq_chip_ciu2_mbox, handle_percpu_irq); + irq_set_chip_and_handler(OCTEON_IRQ_MBOX2, &octeon_irq_chip_ciu2_mbox, handle_percpu_irq); + irq_set_chip_and_handler(OCTEON_IRQ_MBOX3, &octeon_irq_chip_ciu2_mbox, handle_percpu_irq); + + /* Enable the CIU lines */ + set_c0_status(STATUSF_IP3 | STATUSF_IP2); + clear_c0_status(STATUSF_IP4); + return 0; +err: + return r; +} + +struct octeon_irq_cib_host_data { + raw_spinlock_t lock; + u64 raw_reg; + u64 en_reg; + int max_bits; +}; + +struct octeon_irq_cib_chip_data { + struct octeon_irq_cib_host_data *host_data; + int bit; +}; + +static void octeon_irq_cib_enable(struct irq_data *data) +{ + unsigned long flags; + u64 en; + struct octeon_irq_cib_chip_data *cd = irq_data_get_irq_chip_data(data); + struct octeon_irq_cib_host_data *host_data = cd->host_data; + + raw_spin_lock_irqsave(&host_data->lock, flags); + en = cvmx_read_csr(host_data->en_reg); + en |= 1ull << cd->bit; + cvmx_write_csr(host_data->en_reg, en); + raw_spin_unlock_irqrestore(&host_data->lock, flags); +} + +static void octeon_irq_cib_disable(struct irq_data *data) +{ + unsigned long flags; + u64 en; + struct octeon_irq_cib_chip_data *cd = irq_data_get_irq_chip_data(data); + struct octeon_irq_cib_host_data *host_data = cd->host_data; + + raw_spin_lock_irqsave(&host_data->lock, flags); + en = cvmx_read_csr(host_data->en_reg); + en &= ~(1ull << cd->bit); + cvmx_write_csr(host_data->en_reg, en); + raw_spin_unlock_irqrestore(&host_data->lock, flags); +} + +static int octeon_irq_cib_set_type(struct irq_data *data, unsigned int t) +{ + irqd_set_trigger_type(data, t); + return IRQ_SET_MASK_OK; +} + +static struct irq_chip octeon_irq_chip_cib = { + .name = "CIB", + .irq_enable = octeon_irq_cib_enable, + .irq_disable = octeon_irq_cib_disable, + .irq_mask = octeon_irq_cib_disable, + .irq_unmask = octeon_irq_cib_enable, + .irq_set_type = octeon_irq_cib_set_type, +}; + +static int octeon_irq_cib_xlat(struct irq_domain *d, + struct device_node *node, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + unsigned int type = 0; + + if (intsize == 2) + type = intspec[1]; + + switch (type) { + case 0: /* unofficial value, but we might as well let it work. */ + case 4: /* official value for level triggering. */ + *out_type = IRQ_TYPE_LEVEL_HIGH; + break; + case 1: /* official value for edge triggering. */ + *out_type = IRQ_TYPE_EDGE_RISING; + break; + default: /* Nothing else is acceptable. */ + return -EINVAL; + } + + *out_hwirq = intspec[0]; + + return 0; +} + +static int octeon_irq_cib_map(struct irq_domain *d, + unsigned int virq, irq_hw_number_t hw) +{ + struct octeon_irq_cib_host_data *host_data = d->host_data; + struct octeon_irq_cib_chip_data *cd; + + if (hw >= host_data->max_bits) { + pr_err("ERROR: %s mapping %u is to big!\n", + irq_domain_get_of_node(d)->name, (unsigned)hw); + return -EINVAL; + } + + cd = kzalloc(sizeof(*cd), GFP_KERNEL); + if (!cd) + return -ENOMEM; + + cd->host_data = host_data; + cd->bit = hw; + + irq_set_chip_and_handler(virq, &octeon_irq_chip_cib, + handle_simple_irq); + irq_set_chip_data(virq, cd); + return 0; +} + +static struct irq_domain_ops octeon_irq_domain_cib_ops = { + .map = octeon_irq_cib_map, + .unmap = octeon_irq_free_cd, + .xlate = octeon_irq_cib_xlat, +}; + +/* Chain to real handler. */ +static irqreturn_t octeon_irq_cib_handler(int my_irq, void *data) +{ + u64 en; + u64 raw; + u64 bits; + int i; + int irq; + struct irq_domain *cib_domain = data; + struct octeon_irq_cib_host_data *host_data = cib_domain->host_data; + + en = cvmx_read_csr(host_data->en_reg); + raw = cvmx_read_csr(host_data->raw_reg); + + bits = en & raw; + + for (i = 0; i < host_data->max_bits; i++) { + if ((bits & 1ull << i) == 0) + continue; + irq = irq_find_mapping(cib_domain, i); + if (!irq) { + unsigned long flags; + + pr_err("ERROR: CIB bit %d@%llx IRQ unhandled, disabling\n", + i, host_data->raw_reg); + raw_spin_lock_irqsave(&host_data->lock, flags); + en = cvmx_read_csr(host_data->en_reg); + en &= ~(1ull << i); + cvmx_write_csr(host_data->en_reg, en); + cvmx_write_csr(host_data->raw_reg, 1ull << i); + raw_spin_unlock_irqrestore(&host_data->lock, flags); + } else { + struct irq_desc *desc = irq_to_desc(irq); + struct irq_data *irq_data = irq_desc_get_irq_data(desc); + /* If edge, acknowledge the bit we will be sending. */ + if (irqd_get_trigger_type(irq_data) & + IRQ_TYPE_EDGE_BOTH) + cvmx_write_csr(host_data->raw_reg, 1ull << i); + generic_handle_irq_desc(desc); + } + } + + return IRQ_HANDLED; +} + +static int __init octeon_irq_init_cib(struct device_node *ciu_node, + struct device_node *parent) +{ + const __be32 *addr; + u32 val; + struct octeon_irq_cib_host_data *host_data; + int parent_irq; + int r; + struct irq_domain *cib_domain; + + parent_irq = irq_of_parse_and_map(ciu_node, 0); + if (!parent_irq) { + pr_err("ERROR: Couldn't acquire parent_irq for %s\n", + ciu_node->name); + return -EINVAL; + } + + host_data = kzalloc(sizeof(*host_data), GFP_KERNEL); + if (!host_data) + return -ENOMEM; + raw_spin_lock_init(&host_data->lock); + + addr = of_get_address(ciu_node, 0, NULL, NULL); + if (!addr) { + pr_err("ERROR: Couldn't acquire reg(0) %s\n", ciu_node->name); + return -EINVAL; + } + host_data->raw_reg = (u64)phys_to_virt( + of_translate_address(ciu_node, addr)); + + addr = of_get_address(ciu_node, 1, NULL, NULL); + if (!addr) { + pr_err("ERROR: Couldn't acquire reg(1) %s\n", ciu_node->name); + return -EINVAL; + } + host_data->en_reg = (u64)phys_to_virt( + of_translate_address(ciu_node, addr)); + + r = of_property_read_u32(ciu_node, "cavium,max-bits", &val); + if (r) { + pr_err("ERROR: Couldn't read cavium,max-bits from %s\n", + ciu_node->name); + return r; + } + host_data->max_bits = val; + + cib_domain = irq_domain_add_linear(ciu_node, host_data->max_bits, + &octeon_irq_domain_cib_ops, + host_data); + if (!cib_domain) { + pr_err("ERROR: Couldn't irq_domain_add_linear()\n"); + return -ENOMEM; + } + + cvmx_write_csr(host_data->en_reg, 0); /* disable all IRQs */ + cvmx_write_csr(host_data->raw_reg, ~0); /* ack any outstanding */ + + r = request_irq(parent_irq, octeon_irq_cib_handler, + IRQF_NO_THREAD, "cib", cib_domain); + if (r) { + pr_err("request_irq cib failed %d\n", r); + return r; + } + pr_info("CIB interrupt controller probed: %llx %d\n", + host_data->raw_reg, host_data->max_bits); + return 0; +} + +int octeon_irq_ciu3_xlat(struct irq_domain *d, + struct device_node *node, + const u32 *intspec, + unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + struct octeon_ciu3_info *ciu3_info = d->host_data; + unsigned int hwirq, type, intsn_major; + union cvmx_ciu3_iscx_ctl isc; + + if (intsize < 2) + return -EINVAL; + hwirq = intspec[0]; + type = intspec[1]; + + if (hwirq >= (1 << 20)) + return -EINVAL; + + intsn_major = hwirq >> 12; + switch (intsn_major) { + case 0x04: /* Software handled separately. */ + return -EINVAL; + default: + break; + } + + isc.u64 = cvmx_read_csr(ciu3_info->ciu3_addr + CIU3_ISC_CTL(hwirq)); + if (!isc.s.imp) + return -EINVAL; + + switch (type) { + case 4: /* official value for level triggering. */ + *out_type = IRQ_TYPE_LEVEL_HIGH; + break; + case 0: /* unofficial value, but we might as well let it work. */ + case 1: /* official value for edge triggering. */ + *out_type = IRQ_TYPE_EDGE_RISING; + break; + default: /* Nothing else is acceptable. */ + return -EINVAL; + } + + *out_hwirq = hwirq; + + return 0; +} + +void octeon_irq_ciu3_enable(struct irq_data *data) +{ + int cpu; + union cvmx_ciu3_iscx_ctl isc_ctl; + union cvmx_ciu3_iscx_w1c isc_w1c; + u64 isc_ctl_addr; + + struct octeon_ciu_chip_data *cd; + + cpu = next_cpu_for_irq(data); + + cd = irq_data_get_irq_chip_data(data); + + isc_w1c.u64 = 0; + isc_w1c.s.en = 1; + cvmx_write_csr(cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn), isc_w1c.u64); + + isc_ctl_addr = cd->ciu3_addr + CIU3_ISC_CTL(cd->intsn); + isc_ctl.u64 = 0; + isc_ctl.s.en = 1; + isc_ctl.s.idt = per_cpu(octeon_irq_ciu3_idt_ip2, cpu); + cvmx_write_csr(isc_ctl_addr, isc_ctl.u64); + cvmx_read_csr(isc_ctl_addr); +} + +void octeon_irq_ciu3_disable(struct irq_data *data) +{ + u64 isc_ctl_addr; + union cvmx_ciu3_iscx_w1c isc_w1c; + + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + + isc_w1c.u64 = 0; + isc_w1c.s.en = 1; + + isc_ctl_addr = cd->ciu3_addr + CIU3_ISC_CTL(cd->intsn); + cvmx_write_csr(cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn), isc_w1c.u64); + cvmx_write_csr(isc_ctl_addr, 0); + cvmx_read_csr(isc_ctl_addr); +} + +void octeon_irq_ciu3_ack(struct irq_data *data) +{ + u64 isc_w1c_addr; + union cvmx_ciu3_iscx_w1c isc_w1c; + struct octeon_ciu_chip_data *cd; + u32 trigger_type = irqd_get_trigger_type(data); + + /* + * We use a single irq_chip, so we have to do nothing to ack a + * level interrupt. + */ + if (!(trigger_type & IRQ_TYPE_EDGE_BOTH)) + return; + + cd = irq_data_get_irq_chip_data(data); + + isc_w1c.u64 = 0; + isc_w1c.s.raw = 1; + + isc_w1c_addr = cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn); + cvmx_write_csr(isc_w1c_addr, isc_w1c.u64); + cvmx_read_csr(isc_w1c_addr); +} + +void octeon_irq_ciu3_mask(struct irq_data *data) +{ + union cvmx_ciu3_iscx_w1c isc_w1c; + u64 isc_w1c_addr; + struct octeon_ciu_chip_data *cd; + + cd = irq_data_get_irq_chip_data(data); + + isc_w1c.u64 = 0; + isc_w1c.s.en = 1; + + isc_w1c_addr = cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn); + cvmx_write_csr(isc_w1c_addr, isc_w1c.u64); + cvmx_read_csr(isc_w1c_addr); +} + +void octeon_irq_ciu3_mask_ack(struct irq_data *data) +{ + union cvmx_ciu3_iscx_w1c isc_w1c; + u64 isc_w1c_addr; + struct octeon_ciu_chip_data *cd; + u32 trigger_type = irqd_get_trigger_type(data); + + cd = irq_data_get_irq_chip_data(data); + + isc_w1c.u64 = 0; + isc_w1c.s.en = 1; + + /* + * We use a single irq_chip, so only ack an edge (!level) + * interrupt. + */ + if (trigger_type & IRQ_TYPE_EDGE_BOTH) + isc_w1c.s.raw = 1; + + isc_w1c_addr = cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn); + cvmx_write_csr(isc_w1c_addr, isc_w1c.u64); + cvmx_read_csr(isc_w1c_addr); +} + +#ifdef CONFIG_SMP +int octeon_irq_ciu3_set_affinity(struct irq_data *data, + const struct cpumask *dest, bool force) +{ + union cvmx_ciu3_iscx_ctl isc_ctl; + union cvmx_ciu3_iscx_w1c isc_w1c; + u64 isc_ctl_addr; + int cpu; + bool enable_one = !irqd_irq_disabled(data) && !irqd_irq_masked(data); + struct octeon_ciu_chip_data *cd = irq_data_get_irq_chip_data(data); + + if (!cpumask_subset(dest, cpumask_of_node(cd->ciu_node))) + return -EINVAL; + + if (!enable_one) + return IRQ_SET_MASK_OK; + + cd = irq_data_get_irq_chip_data(data); + cpu = cpumask_first(dest); + if (cpu >= nr_cpu_ids) + cpu = smp_processor_id(); + cd->current_cpu = cpu; + + isc_w1c.u64 = 0; + isc_w1c.s.en = 1; + cvmx_write_csr(cd->ciu3_addr + CIU3_ISC_W1C(cd->intsn), isc_w1c.u64); + + isc_ctl_addr = cd->ciu3_addr + CIU3_ISC_CTL(cd->intsn); + isc_ctl.u64 = 0; + isc_ctl.s.en = 1; + isc_ctl.s.idt = per_cpu(octeon_irq_ciu3_idt_ip2, cpu); + cvmx_write_csr(isc_ctl_addr, isc_ctl.u64); + cvmx_read_csr(isc_ctl_addr); + + return IRQ_SET_MASK_OK; +} +#endif + +static struct irq_chip octeon_irq_chip_ciu3 = { + .name = "CIU3", + .irq_startup = edge_startup, + .irq_enable = octeon_irq_ciu3_enable, + .irq_disable = octeon_irq_ciu3_disable, + .irq_ack = octeon_irq_ciu3_ack, + .irq_mask = octeon_irq_ciu3_mask, + .irq_mask_ack = octeon_irq_ciu3_mask_ack, + .irq_unmask = octeon_irq_ciu3_enable, + .irq_set_type = octeon_irq_ciu_set_type, +#ifdef CONFIG_SMP + .irq_set_affinity = octeon_irq_ciu3_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, +#endif +}; + +int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw, struct irq_chip *chip) +{ + struct octeon_ciu3_info *ciu3_info = d->host_data; + struct octeon_ciu_chip_data *cd = kzalloc_node(sizeof(*cd), GFP_KERNEL, + ciu3_info->node); + if (!cd) + return -ENOMEM; + cd->intsn = hw; + cd->current_cpu = -1; + cd->ciu3_addr = ciu3_info->ciu3_addr; + cd->ciu_node = ciu3_info->node; + irq_set_chip_and_handler(virq, chip, handle_edge_irq); + irq_set_chip_data(virq, cd); + + return 0; +} + +static int octeon_irq_ciu3_map(struct irq_domain *d, + unsigned int virq, irq_hw_number_t hw) +{ + return octeon_irq_ciu3_mapx(d, virq, hw, &octeon_irq_chip_ciu3); +} + +static struct irq_domain_ops octeon_dflt_domain_ciu3_ops = { + .map = octeon_irq_ciu3_map, + .unmap = octeon_irq_free_cd, + .xlate = octeon_irq_ciu3_xlat, +}; + +static void octeon_irq_ciu3_ip2(void) +{ + union cvmx_ciu3_destx_pp_int dest_pp_int; + struct octeon_ciu3_info *ciu3_info; + u64 ciu3_addr; + + ciu3_info = __this_cpu_read(octeon_ciu3_info); + ciu3_addr = ciu3_info->ciu3_addr; + + dest_pp_int.u64 = cvmx_read_csr(ciu3_addr + CIU3_DEST_PP_INT(3 * cvmx_get_local_core_num())); + + if (likely(dest_pp_int.s.intr)) { + irq_hw_number_t intsn = dest_pp_int.s.intsn; + irq_hw_number_t hw; + struct irq_domain *domain; + /* Get the domain to use from the major block */ + int block = intsn >> 12; + int ret; + + domain = ciu3_info->domain[block]; + if (ciu3_info->intsn2hw[block]) + hw = ciu3_info->intsn2hw[block](domain, intsn); + else + hw = intsn; + + ret = handle_domain_irq(domain, hw, NULL); + if (ret < 0) { + union cvmx_ciu3_iscx_w1c isc_w1c; + u64 isc_w1c_addr = ciu3_addr + CIU3_ISC_W1C(intsn); + + isc_w1c.u64 = 0; + isc_w1c.s.en = 1; + cvmx_write_csr(isc_w1c_addr, isc_w1c.u64); + cvmx_read_csr(isc_w1c_addr); + spurious_interrupt(); + } + } else { + spurious_interrupt(); + } +} + +/* + * 10 mbox per core starting from zero. + * Base mbox is core * 10 + */ +static unsigned int octeon_irq_ciu3_base_mbox_intsn(int core) +{ + /* SW (mbox) are 0x04 in bits 12..19 */ + return 0x04000 + CIU3_MBOX_PER_CORE * core; +} + +static unsigned int octeon_irq_ciu3_mbox_intsn_for_core(int core, unsigned int mbox) +{ + return octeon_irq_ciu3_base_mbox_intsn(core) + mbox; +} + +static unsigned int octeon_irq_ciu3_mbox_intsn_for_cpu(int cpu, unsigned int mbox) +{ + int local_core = octeon_coreid_for_cpu(cpu) & 0x3f; + + return octeon_irq_ciu3_mbox_intsn_for_core(local_core, mbox); +} + +static void octeon_irq_ciu3_mbox(void) +{ + union cvmx_ciu3_destx_pp_int dest_pp_int; + struct octeon_ciu3_info *ciu3_info; + u64 ciu3_addr; + int core = cvmx_get_local_core_num(); + + ciu3_info = __this_cpu_read(octeon_ciu3_info); + ciu3_addr = ciu3_info->ciu3_addr; + + dest_pp_int.u64 = cvmx_read_csr(ciu3_addr + CIU3_DEST_PP_INT(1 + 3 * core)); + + if (likely(dest_pp_int.s.intr)) { + irq_hw_number_t intsn = dest_pp_int.s.intsn; + int mbox = intsn - octeon_irq_ciu3_base_mbox_intsn(core); + + if (likely(mbox >= 0 && mbox < CIU3_MBOX_PER_CORE)) { + do_IRQ(mbox + OCTEON_IRQ_MBOX0); + } else { + union cvmx_ciu3_iscx_w1c isc_w1c; + u64 isc_w1c_addr = ciu3_addr + CIU3_ISC_W1C(intsn); + + isc_w1c.u64 = 0; + isc_w1c.s.en = 1; + cvmx_write_csr(isc_w1c_addr, isc_w1c.u64); + cvmx_read_csr(isc_w1c_addr); + spurious_interrupt(); + } + } else { + spurious_interrupt(); + } +} + +void octeon_ciu3_mbox_send(int cpu, unsigned int mbox) +{ + struct octeon_ciu3_info *ciu3_info; + unsigned int intsn; + union cvmx_ciu3_iscx_w1s isc_w1s; + u64 isc_w1s_addr; + + if (WARN_ON_ONCE(mbox >= CIU3_MBOX_PER_CORE)) + return; + + intsn = octeon_irq_ciu3_mbox_intsn_for_cpu(cpu, mbox); + ciu3_info = per_cpu(octeon_ciu3_info, cpu); + isc_w1s_addr = ciu3_info->ciu3_addr + CIU3_ISC_W1S(intsn); + + isc_w1s.u64 = 0; + isc_w1s.s.raw = 1; + + cvmx_write_csr(isc_w1s_addr, isc_w1s.u64); + cvmx_read_csr(isc_w1s_addr); +} + +static void octeon_irq_ciu3_mbox_set_enable(struct irq_data *data, int cpu, bool en) +{ + struct octeon_ciu3_info *ciu3_info; + unsigned int intsn; + u64 isc_ctl_addr, isc_w1c_addr; + union cvmx_ciu3_iscx_ctl isc_ctl; + unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0; + + intsn = octeon_irq_ciu3_mbox_intsn_for_cpu(cpu, mbox); + ciu3_info = per_cpu(octeon_ciu3_info, cpu); + isc_w1c_addr = ciu3_info->ciu3_addr + CIU3_ISC_W1C(intsn); + isc_ctl_addr = ciu3_info->ciu3_addr + CIU3_ISC_CTL(intsn); + + isc_ctl.u64 = 0; + isc_ctl.s.en = 1; + + cvmx_write_csr(isc_w1c_addr, isc_ctl.u64); + cvmx_write_csr(isc_ctl_addr, 0); + if (en) { + unsigned int idt = per_cpu(octeon_irq_ciu3_idt_ip3, cpu); + + isc_ctl.u64 = 0; + isc_ctl.s.en = 1; + isc_ctl.s.idt = idt; + cvmx_write_csr(isc_ctl_addr, isc_ctl.u64); + } + cvmx_read_csr(isc_ctl_addr); +} + +static void octeon_irq_ciu3_mbox_enable(struct irq_data *data) +{ + int cpu; + unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0; + + WARN_ON(mbox >= CIU3_MBOX_PER_CORE); + + for_each_online_cpu(cpu) + octeon_irq_ciu3_mbox_set_enable(data, cpu, true); +} + +static void octeon_irq_ciu3_mbox_disable(struct irq_data *data) +{ + int cpu; + unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0; + + WARN_ON(mbox >= CIU3_MBOX_PER_CORE); + + for_each_online_cpu(cpu) + octeon_irq_ciu3_mbox_set_enable(data, cpu, false); +} + +static void octeon_irq_ciu3_mbox_ack(struct irq_data *data) +{ + struct octeon_ciu3_info *ciu3_info; + unsigned int intsn; + u64 isc_w1c_addr; + union cvmx_ciu3_iscx_w1c isc_w1c; + unsigned int mbox = data->irq - OCTEON_IRQ_MBOX0; + + intsn = octeon_irq_ciu3_mbox_intsn_for_core(cvmx_get_local_core_num(), mbox); + + isc_w1c.u64 = 0; + isc_w1c.s.raw = 1; + + ciu3_info = __this_cpu_read(octeon_ciu3_info); + isc_w1c_addr = ciu3_info->ciu3_addr + CIU3_ISC_W1C(intsn); + cvmx_write_csr(isc_w1c_addr, isc_w1c.u64); + cvmx_read_csr(isc_w1c_addr); +} + +static void octeon_irq_ciu3_mbox_cpu_online(struct irq_data *data) +{ + octeon_irq_ciu3_mbox_set_enable(data, smp_processor_id(), true); +} + +static void octeon_irq_ciu3_mbox_cpu_offline(struct irq_data *data) +{ + octeon_irq_ciu3_mbox_set_enable(data, smp_processor_id(), false); +} + +static int octeon_irq_ciu3_alloc_resources(struct octeon_ciu3_info *ciu3_info) +{ + u64 b = ciu3_info->ciu3_addr; + int idt_ip2, idt_ip3, idt_ip4; + int unused_idt2; + int core = cvmx_get_local_core_num(); + int i; + + __this_cpu_write(octeon_ciu3_info, ciu3_info); + + /* + * 4 idt per core starting from 1 because zero is reserved. + * Base idt per core is 4 * core + 1 + */ + idt_ip2 = core * 4 + 1; + idt_ip3 = core * 4 + 2; + idt_ip4 = core * 4 + 3; + unused_idt2 = core * 4 + 4; + __this_cpu_write(octeon_irq_ciu3_idt_ip2, idt_ip2); + __this_cpu_write(octeon_irq_ciu3_idt_ip3, idt_ip3); + + /* ip2 interrupts for this CPU */ + cvmx_write_csr(b + CIU3_IDT_CTL(idt_ip2), 0); + cvmx_write_csr(b + CIU3_IDT_PP(idt_ip2, 0), 1ull << core); + cvmx_write_csr(b + CIU3_IDT_IO(idt_ip2), 0); + + /* ip3 interrupts for this CPU */ + cvmx_write_csr(b + CIU3_IDT_CTL(idt_ip3), 1); + cvmx_write_csr(b + CIU3_IDT_PP(idt_ip3, 0), 1ull << core); + cvmx_write_csr(b + CIU3_IDT_IO(idt_ip3), 0); + + /* ip4 interrupts for this CPU */ + cvmx_write_csr(b + CIU3_IDT_CTL(idt_ip4), 2); + cvmx_write_csr(b + CIU3_IDT_PP(idt_ip4, 0), 0); + cvmx_write_csr(b + CIU3_IDT_IO(idt_ip4), 0); + + cvmx_write_csr(b + CIU3_IDT_CTL(unused_idt2), 0); + cvmx_write_csr(b + CIU3_IDT_PP(unused_idt2, 0), 0); + cvmx_write_csr(b + CIU3_IDT_IO(unused_idt2), 0); + + for (i = 0; i < CIU3_MBOX_PER_CORE; i++) { + unsigned int intsn = octeon_irq_ciu3_mbox_intsn_for_core(core, i); + + cvmx_write_csr(b + CIU3_ISC_W1C(intsn), 2); + cvmx_write_csr(b + CIU3_ISC_CTL(intsn), 0); + } + + return 0; +} + +static void octeon_irq_setup_secondary_ciu3(void) +{ + struct octeon_ciu3_info *ciu3_info; + + ciu3_info = octeon_ciu3_info_per_node[cvmx_get_node_num()]; + octeon_irq_ciu3_alloc_resources(ciu3_info); + irq_cpu_online(); + + /* Enable the CIU lines */ + set_c0_status(STATUSF_IP3 | STATUSF_IP2); + if (octeon_irq_use_ip4) + set_c0_status(STATUSF_IP4); + else + clear_c0_status(STATUSF_IP4); +} + +static struct irq_chip octeon_irq_chip_ciu3_mbox = { + .name = "CIU3-M", + .irq_enable = octeon_irq_ciu3_mbox_enable, + .irq_disable = octeon_irq_ciu3_mbox_disable, + .irq_ack = octeon_irq_ciu3_mbox_ack, + + .irq_cpu_online = octeon_irq_ciu3_mbox_cpu_online, + .irq_cpu_offline = octeon_irq_ciu3_mbox_cpu_offline, + .flags = IRQCHIP_ONOFFLINE_ENABLED, +}; + +static int __init octeon_irq_init_ciu3(struct device_node *ciu_node, + struct device_node *parent) +{ + int i; + int node; + struct irq_domain *domain; + struct octeon_ciu3_info *ciu3_info; + const __be32 *zero_addr; + u64 base_addr; + union cvmx_ciu3_const consts; + + node = 0; /* of_node_to_nid(ciu_node); */ + ciu3_info = kzalloc_node(sizeof(*ciu3_info), GFP_KERNEL, node); + + if (!ciu3_info) + return -ENOMEM; + + zero_addr = of_get_address(ciu_node, 0, NULL, NULL); + if (WARN_ON(!zero_addr)) + return -EINVAL; + + base_addr = of_translate_address(ciu_node, zero_addr); + base_addr = (u64)phys_to_virt(base_addr); + + ciu3_info->ciu3_addr = base_addr; + ciu3_info->node = node; + + consts.u64 = cvmx_read_csr(base_addr + CIU3_CONST); + + octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu3; + + octeon_irq_ip2 = octeon_irq_ciu3_ip2; + octeon_irq_ip3 = octeon_irq_ciu3_mbox; + octeon_irq_ip4 = octeon_irq_ip4_mask; + + if (node == cvmx_get_node_num()) { + /* Mips internal */ + octeon_irq_init_core(); + + /* Only do per CPU things if it is the CIU of the boot node. */ + i = irq_alloc_descs_from(OCTEON_IRQ_MBOX0, 8, node); + WARN_ON(i < 0); + + for (i = 0; i < 8; i++) + irq_set_chip_and_handler(i + OCTEON_IRQ_MBOX0, + &octeon_irq_chip_ciu3_mbox, handle_percpu_irq); + } + + /* + * Initialize all domains to use the default domain. Specific major + * blocks will overwrite the default domain as needed. + */ + domain = irq_domain_add_tree(ciu_node, &octeon_dflt_domain_ciu3_ops, + ciu3_info); + for (i = 0; i < MAX_CIU3_DOMAINS; i++) + ciu3_info->domain[i] = domain; + + octeon_ciu3_info_per_node[node] = ciu3_info; + + if (node == cvmx_get_node_num()) { + /* Only do per CPU things if it is the CIU of the boot node. */ + octeon_irq_ciu3_alloc_resources(ciu3_info); + if (node == 0) + irq_set_default_host(domain); + + octeon_irq_use_ip4 = false; + /* Enable the CIU lines */ + set_c0_status(STATUSF_IP2 | STATUSF_IP3); + clear_c0_status(STATUSF_IP4); + } + + return 0; +} + +static struct of_device_id ciu_types[] __initdata = { + {.compatible = "cavium,octeon-3860-ciu", .data = octeon_irq_init_ciu}, + {.compatible = "cavium,octeon-3860-gpio", .data = octeon_irq_init_gpio}, + {.compatible = "cavium,octeon-6880-ciu2", .data = octeon_irq_init_ciu2}, + {.compatible = "cavium,octeon-7890-ciu3", .data = octeon_irq_init_ciu3}, + {.compatible = "cavium,octeon-7130-cib", .data = octeon_irq_init_cib}, + {} +}; + +void __init arch_init_irq(void) +{ +#ifdef CONFIG_SMP + /* Set the default affinity to the boot cpu. */ + cpumask_clear(irq_default_affinity); + cpumask_set_cpu(smp_processor_id(), irq_default_affinity); +#endif + of_irq_init(ciu_types); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long cop0_cause; + unsigned long cop0_status; + + while (1) { + cop0_cause = read_c0_cause(); + cop0_status = read_c0_status(); + cop0_cause &= cop0_status; + cop0_cause &= ST0_IM; + + if (cop0_cause & STATUSF_IP2) + octeon_irq_ip2(); + else if (cop0_cause & STATUSF_IP3) + octeon_irq_ip3(); + else if (cop0_cause & STATUSF_IP4) + octeon_irq_ip4(); + else if (cop0_cause) + do_IRQ(fls(cop0_cause) - 9 + MIPS_CPU_IRQ_BASE); + else + break; + } +} + +#ifdef CONFIG_HOTPLUG_CPU + +void octeon_fixup_irqs(void) +{ + irq_cpu_offline(); +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +struct irq_domain *octeon_irq_get_block_domain(int node, uint8_t block) +{ + struct octeon_ciu3_info *ciu3_info; + + ciu3_info = octeon_ciu3_info_per_node[node & CVMX_NODE_MASK]; + return ciu3_info->domain[block]; +} +EXPORT_SYMBOL(octeon_irq_get_block_domain); diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S new file mode 100644 index 000000000..0a7c9834b --- /dev/null +++ b/arch/mips/cavium-octeon/octeon-memcpy.S @@ -0,0 +1,482 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Unified implementation of memcpy, memmove and the __copy_user backend. + * + * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc. + * Copyright (C) 2002 Broadcom, Inc. + * memcpy/copy_user author: Mark Vandevoorde + * + * Mnemonic names for arguments to memcpy/__copy_user + */ + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/export.h> +#include <asm/regdef.h> + +#define dst a0 +#define src a1 +#define len a2 + +/* + * Spec + * + * memcpy copies len bytes from src to dst and sets v0 to dst. + * It assumes that + * - src and dst don't overlap + * - src is readable + * - dst is writable + * memcpy uses the standard calling convention + * + * __copy_user copies up to len bytes from src to dst and sets a2 (len) to + * the number of uncopied bytes due to an exception caused by a read or write. + * __copy_user assumes that src and dst don't overlap, and that the call is + * implementing one of the following: + * copy_to_user + * - src is readable (no exceptions when reading src) + * copy_from_user + * - dst is writable (no exceptions when writing dst) + * __copy_user uses a non-standard calling convention; see + * arch/mips/include/asm/uaccess.h + * + * When an exception happens on a load, the handler must + # ensure that all of the destination buffer is overwritten to prevent + * leaking information to user mode programs. + */ + +/* + * Implementation + */ + +/* + * The exception handler for loads requires that: + * 1- AT contain the address of the byte just past the end of the source + * of the copy, + * 2- src_entry <= src < AT, and + * 3- (dst - src) == (dst_entry - src_entry), + * The _entry suffix denotes values when __copy_user was called. + * + * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user + * (2) is met by incrementing src by the number of bytes copied + * (3) is met by not doing loads between a pair of increments of dst and src + * + * The exception handlers for stores adjust len (if necessary) and return. + * These handlers do not need to overwrite any data. + * + * For __rmemcpy and memmove an exception is always a kernel bug, therefore + * they're not protected. + */ + +#define EXC(inst_reg,addr,handler) \ +9: inst_reg, addr; \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ + .previous + +/* + * Only on the 64-bit kernel we can made use of 64-bit registers. + */ + +#define LOAD ld +#define LOADL ldl +#define LOADR ldr +#define STOREL sdl +#define STORER sdr +#define STORE sd +#define ADD daddu +#define SUB dsubu +#define SRL dsrl +#define SRA dsra +#define SLL dsll +#define SLLV dsllv +#define SRLV dsrlv +#define NBYTES 8 +#define LOG_NBYTES 3 + +/* + * As we are sharing code base with the mips32 tree (which use the o32 ABI + * register definitions). We need to redefine the register definitions from + * the n64 ABI register naming to the o32 ABI register naming. + */ +#undef t0 +#undef t1 +#undef t2 +#undef t3 +#define t0 $8 +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 +#define t5 $13 +#define t6 $14 +#define t7 $15 + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define LDFIRST LOADR +#define LDREST LOADL +#define STFIRST STORER +#define STREST STOREL +#define SHIFT_DISCARD SLLV +#else +#define LDFIRST LOADL +#define LDREST LOADR +#define STFIRST STOREL +#define STREST STORER +#define SHIFT_DISCARD SRLV +#endif + +#define FIRST(unit) ((unit)*NBYTES) +#define REST(unit) (FIRST(unit)+NBYTES-1) +#define UNIT(unit) FIRST(unit) + +#define ADDRMASK (NBYTES-1) + + .text + .set noreorder + .set noat + +/* + * A combined memcpy/__copy_user + * __copy_user sets len to 0 for success; else to an upper bound of + * the number of uncopied bytes. + * memcpy sets v0 to dst. + */ + .align 5 +LEAF(memcpy) /* a0=dst a1=src a2=len */ +EXPORT_SYMBOL(memcpy) + move v0, dst /* return value */ +__memcpy: +FEXPORT(__copy_user) +EXPORT_SYMBOL(__copy_user) + /* + * Note: dst & src may be unaligned, len may be 0 + * Temps + */ + # + # Octeon doesn't care if the destination is unaligned. The hardware + # can fix it faster than we can special case the assembly. + # + pref 0, 0(src) + sltu t0, len, NBYTES # Check if < 1 word + bnez t0, copy_bytes_checklen + and t0, src, ADDRMASK # Check if src unaligned + bnez t0, src_unaligned + sltu t0, len, 4*NBYTES # Check if < 4 words + bnez t0, less_than_4units + sltu t0, len, 8*NBYTES # Check if < 8 words + bnez t0, less_than_8units + sltu t0, len, 16*NBYTES # Check if < 16 words + bnez t0, cleanup_both_aligned + sltu t0, len, 128+1 # Check if len < 129 + bnez t0, 1f # Skip prefetch if len is too short + sltu t0, len, 256+1 # Check if len < 257 + bnez t0, 1f # Skip prefetch if len is too short + pref 0, 128(src) # We must not prefetch invalid addresses + # + # This is where we loop if there is more than 128 bytes left +2: pref 0, 256(src) # We must not prefetch invalid addresses + # + # This is where we loop if we can't prefetch anymore +1: +EXC( LOAD t0, UNIT(0)(src), l_exc) +EXC( LOAD t1, UNIT(1)(src), l_exc_copy) +EXC( LOAD t2, UNIT(2)(src), l_exc_copy) +EXC( LOAD t3, UNIT(3)(src), l_exc_copy) + SUB len, len, 16*NBYTES +EXC( STORE t0, UNIT(0)(dst), s_exc_p16u) +EXC( STORE t1, UNIT(1)(dst), s_exc_p15u) +EXC( STORE t2, UNIT(2)(dst), s_exc_p14u) +EXC( STORE t3, UNIT(3)(dst), s_exc_p13u) +EXC( LOAD t0, UNIT(4)(src), l_exc_copy) +EXC( LOAD t1, UNIT(5)(src), l_exc_copy) +EXC( LOAD t2, UNIT(6)(src), l_exc_copy) +EXC( LOAD t3, UNIT(7)(src), l_exc_copy) +EXC( STORE t0, UNIT(4)(dst), s_exc_p12u) +EXC( STORE t1, UNIT(5)(dst), s_exc_p11u) +EXC( STORE t2, UNIT(6)(dst), s_exc_p10u) + ADD src, src, 16*NBYTES +EXC( STORE t3, UNIT(7)(dst), s_exc_p9u) + ADD dst, dst, 16*NBYTES +EXC( LOAD t0, UNIT(-8)(src), l_exc_copy_rewind16) +EXC( LOAD t1, UNIT(-7)(src), l_exc_copy_rewind16) +EXC( LOAD t2, UNIT(-6)(src), l_exc_copy_rewind16) +EXC( LOAD t3, UNIT(-5)(src), l_exc_copy_rewind16) +EXC( STORE t0, UNIT(-8)(dst), s_exc_p8u) +EXC( STORE t1, UNIT(-7)(dst), s_exc_p7u) +EXC( STORE t2, UNIT(-6)(dst), s_exc_p6u) +EXC( STORE t3, UNIT(-5)(dst), s_exc_p5u) +EXC( LOAD t0, UNIT(-4)(src), l_exc_copy_rewind16) +EXC( LOAD t1, UNIT(-3)(src), l_exc_copy_rewind16) +EXC( LOAD t2, UNIT(-2)(src), l_exc_copy_rewind16) +EXC( LOAD t3, UNIT(-1)(src), l_exc_copy_rewind16) +EXC( STORE t0, UNIT(-4)(dst), s_exc_p4u) +EXC( STORE t1, UNIT(-3)(dst), s_exc_p3u) +EXC( STORE t2, UNIT(-2)(dst), s_exc_p2u) +EXC( STORE t3, UNIT(-1)(dst), s_exc_p1u) + sltu t0, len, 256+1 # See if we can prefetch more + beqz t0, 2b + sltu t0, len, 128 # See if we can loop more time + beqz t0, 1b + nop + # + # Jump here if there are less than 16*NBYTES left. + # +cleanup_both_aligned: + beqz len, done + sltu t0, len, 8*NBYTES + bnez t0, less_than_8units + nop +EXC( LOAD t0, UNIT(0)(src), l_exc) +EXC( LOAD t1, UNIT(1)(src), l_exc_copy) +EXC( LOAD t2, UNIT(2)(src), l_exc_copy) +EXC( LOAD t3, UNIT(3)(src), l_exc_copy) + SUB len, len, 8*NBYTES +EXC( STORE t0, UNIT(0)(dst), s_exc_p8u) +EXC( STORE t1, UNIT(1)(dst), s_exc_p7u) +EXC( STORE t2, UNIT(2)(dst), s_exc_p6u) +EXC( STORE t3, UNIT(3)(dst), s_exc_p5u) +EXC( LOAD t0, UNIT(4)(src), l_exc_copy) +EXC( LOAD t1, UNIT(5)(src), l_exc_copy) +EXC( LOAD t2, UNIT(6)(src), l_exc_copy) +EXC( LOAD t3, UNIT(7)(src), l_exc_copy) +EXC( STORE t0, UNIT(4)(dst), s_exc_p4u) +EXC( STORE t1, UNIT(5)(dst), s_exc_p3u) +EXC( STORE t2, UNIT(6)(dst), s_exc_p2u) +EXC( STORE t3, UNIT(7)(dst), s_exc_p1u) + ADD src, src, 8*NBYTES + beqz len, done + ADD dst, dst, 8*NBYTES + # + # Jump here if there are less than 8*NBYTES left. + # +less_than_8units: + sltu t0, len, 4*NBYTES + bnez t0, less_than_4units + nop +EXC( LOAD t0, UNIT(0)(src), l_exc) +EXC( LOAD t1, UNIT(1)(src), l_exc_copy) +EXC( LOAD t2, UNIT(2)(src), l_exc_copy) +EXC( LOAD t3, UNIT(3)(src), l_exc_copy) + SUB len, len, 4*NBYTES +EXC( STORE t0, UNIT(0)(dst), s_exc_p4u) +EXC( STORE t1, UNIT(1)(dst), s_exc_p3u) +EXC( STORE t2, UNIT(2)(dst), s_exc_p2u) +EXC( STORE t3, UNIT(3)(dst), s_exc_p1u) + ADD src, src, 4*NBYTES + beqz len, done + ADD dst, dst, 4*NBYTES + # + # Jump here if there are less than 4*NBYTES left. This means + # we may need to copy up to 3 NBYTES words. + # +less_than_4units: + sltu t0, len, 1*NBYTES + bnez t0, copy_bytes_checklen + nop + # + # 1) Copy NBYTES, then check length again + # +EXC( LOAD t0, 0(src), l_exc) + SUB len, len, NBYTES + sltu t1, len, 8 +EXC( STORE t0, 0(dst), s_exc_p1u) + ADD src, src, NBYTES + bnez t1, copy_bytes_checklen + ADD dst, dst, NBYTES + # + # 2) Copy NBYTES, then check length again + # +EXC( LOAD t0, 0(src), l_exc) + SUB len, len, NBYTES + sltu t1, len, 8 +EXC( STORE t0, 0(dst), s_exc_p1u) + ADD src, src, NBYTES + bnez t1, copy_bytes_checklen + ADD dst, dst, NBYTES + # + # 3) Copy NBYTES, then check length again + # +EXC( LOAD t0, 0(src), l_exc) + SUB len, len, NBYTES + ADD src, src, NBYTES + ADD dst, dst, NBYTES + b copy_bytes_checklen +EXC( STORE t0, -8(dst), s_exc_p1u) + +src_unaligned: +#define rem t8 + SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter + beqz t0, cleanup_src_unaligned + and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES +1: +/* + * Avoid consecutive LD*'s to the same register since some mips + * implementations can't issue them in the same cycle. + * It's OK to load FIRST(N+1) before REST(N) because the two addresses + * are to the same unit (unless src is aligned, but it's not). + */ +EXC( LDFIRST t0, FIRST(0)(src), l_exc) +EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) + SUB len, len, 4*NBYTES +EXC( LDREST t0, REST(0)(src), l_exc_copy) +EXC( LDREST t1, REST(1)(src), l_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) +EXC( LDREST t2, REST(2)(src), l_exc_copy) +EXC( LDREST t3, REST(3)(src), l_exc_copy) + ADD src, src, 4*NBYTES +EXC( STORE t0, UNIT(0)(dst), s_exc_p4u) +EXC( STORE t1, UNIT(1)(dst), s_exc_p3u) +EXC( STORE t2, UNIT(2)(dst), s_exc_p2u) +EXC( STORE t3, UNIT(3)(dst), s_exc_p1u) + bne len, rem, 1b + ADD dst, dst, 4*NBYTES + +cleanup_src_unaligned: + beqz len, done + and rem, len, NBYTES-1 # rem = len % NBYTES + beq rem, len, copy_bytes + nop +1: +EXC( LDFIRST t0, FIRST(0)(src), l_exc) +EXC( LDREST t0, REST(0)(src), l_exc_copy) + SUB len, len, NBYTES +EXC( STORE t0, 0(dst), s_exc_p1u) + ADD src, src, NBYTES + bne len, rem, 1b + ADD dst, dst, NBYTES + +copy_bytes_checklen: + beqz len, done + nop +copy_bytes: + /* 0 < len < NBYTES */ +#define COPY_BYTE(N) \ +EXC( lb t0, N(src), l_exc); \ + SUB len, len, 1; \ + beqz len, done; \ +EXC( sb t0, N(dst), s_exc_p1) + + COPY_BYTE(0) + COPY_BYTE(1) + COPY_BYTE(2) + COPY_BYTE(3) + COPY_BYTE(4) + COPY_BYTE(5) +EXC( lb t0, NBYTES-2(src), l_exc) + SUB len, len, 1 + jr ra +EXC( sb t0, NBYTES-2(dst), s_exc_p1) +done: + jr ra + nop + END(memcpy) + +l_exc_copy_rewind16: + /* Rewind src and dst by 16*NBYTES for l_exc_copy */ + SUB src, src, 16*NBYTES + SUB dst, dst, 16*NBYTES +l_exc_copy: + /* + * Copy bytes from src until faulting load address (or until a + * lb faults) + * + * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28) + * may be more than a byte beyond the last address. + * Hence, the lb below may get an exception. + * + * Assumes src < THREAD_BUADDR($28) + */ + LOAD t0, TI_TASK($28) + LOAD t0, THREAD_BUADDR(t0) +1: +EXC( lb t1, 0(src), l_exc) + ADD src, src, 1 + sb t1, 0(dst) # can't fault -- we're copy_from_user + bne src, t0, 1b + ADD dst, dst, 1 +l_exc: + LOAD t0, TI_TASK($28) + LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address + SUB len, AT, t0 # len number of uncopied bytes + jr ra + nop + + +#define SEXC(n) \ +s_exc_p ## n ## u: \ + jr ra; \ + ADD len, len, n*NBYTES + +SEXC(16) +SEXC(15) +SEXC(14) +SEXC(13) +SEXC(12) +SEXC(11) +SEXC(10) +SEXC(9) +SEXC(8) +SEXC(7) +SEXC(6) +SEXC(5) +SEXC(4) +SEXC(3) +SEXC(2) +SEXC(1) + +s_exc_p1: + jr ra + ADD len, len, 1 +s_exc: + jr ra + nop + + .align 5 +LEAF(memmove) +EXPORT_SYMBOL(memmove) + ADD t0, a0, a2 + ADD t1, a1, a2 + sltu t0, a1, t0 # dst + len <= src -> memcpy + sltu t1, a0, t1 # dst >= src + len -> memcpy + and t0, t1 + beqz t0, __memcpy + move v0, a0 /* return value */ + beqz a2, r_out + END(memmove) + + /* fall through to __rmemcpy */ +LEAF(__rmemcpy) /* a0=dst a1=src a2=len */ + sltu t0, a1, a0 + beqz t0, r_end_bytes_up # src >= dst + nop + ADD a0, a2 # dst = dst + len + ADD a1, a2 # src = src + len + +r_end_bytes: + lb t0, -1(a1) + SUB a2, a2, 0x1 + sb t0, -1(a0) + SUB a1, a1, 0x1 + bnez a2, r_end_bytes + SUB a0, a0, 0x1 + +r_out: + jr ra + move a2, zero + +r_end_bytes_up: + lb t0, (a1) + SUB a2, a2, 0x1 + sb t0, (a0) + ADD a1, a1, 0x1 + bnez a2, r_end_bytes_up + ADD a0, a0, 0x1 + + jr ra + move a2, zero + END(__rmemcpy) diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c new file mode 100644 index 000000000..4d83f5bc7 --- /dev/null +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -0,0 +1,1076 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2017 Cavium, Inc. + * Copyright (C) 2008 Wind River Systems + */ + +#include <linux/etherdevice.h> +#include <linux/of_platform.h> +#include <linux/of_fdt.h> +#include <linux/libfdt.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-helper-board.h> + +#ifdef CONFIG_USB +#include <linux/usb/ehci_def.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <asm/octeon/cvmx-uctlx-defs.h> + +#define CVMX_UAHCX_EHCI_USBCMD (CVMX_ADD_IO_SEG(0x00016F0000000010ull)) +#define CVMX_UAHCX_OHCI_USBCMD (CVMX_ADD_IO_SEG(0x00016F0000000408ull)) + +static DEFINE_MUTEX(octeon2_usb_clocks_mutex); + +static int octeon2_usb_clock_start_cnt; + +static int __init octeon2_usb_reset(void) +{ + union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; + u32 ucmd; + + if (!OCTEON_IS_OCTEON2()) + return 0; + + clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); + if (clk_rst_ctl.s.hrst) { + ucmd = cvmx_read64_uint32(CVMX_UAHCX_EHCI_USBCMD); + ucmd &= ~CMD_RUN; + cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd); + mdelay(2); + ucmd |= CMD_RESET; + cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd); + ucmd = cvmx_read64_uint32(CVMX_UAHCX_OHCI_USBCMD); + ucmd |= CMD_RUN; + cvmx_write64_uint32(CVMX_UAHCX_OHCI_USBCMD, ucmd); + } + + return 0; +} +arch_initcall(octeon2_usb_reset); + +static void octeon2_usb_clocks_start(struct device *dev) +{ + u64 div; + union cvmx_uctlx_if_ena if_ena; + union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; + union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status; + int i; + unsigned long io_clk_64_to_ns; + u32 clock_rate = 12000000; + bool is_crystal_clock = false; + + + mutex_lock(&octeon2_usb_clocks_mutex); + + octeon2_usb_clock_start_cnt++; + if (octeon2_usb_clock_start_cnt != 1) + goto exit; + + io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate(); + + if (dev->of_node) { + struct device_node *uctl_node; + const char *clock_type; + + uctl_node = of_get_parent(dev->of_node); + if (!uctl_node) { + dev_err(dev, "No UCTL device node\n"); + goto exit; + } + i = of_property_read_u32(uctl_node, + "refclk-frequency", &clock_rate); + if (i) { + dev_err(dev, "No UCTL \"refclk-frequency\"\n"); + goto exit; + } + i = of_property_read_string(uctl_node, + "refclk-type", &clock_type); + + if (!i && strcmp("crystal", clock_type) == 0) + is_crystal_clock = true; + } + + /* + * Step 1: Wait for voltages stable. That surely happened + * before starting the kernel. + * + * Step 2: Enable SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1 + */ + if_ena.u64 = 0; + if_ena.s.en = 1; + cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64); + + for (i = 0; i <= 1; i++) { + port_ctl_status.u64 = + cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0)); + /* Set txvreftune to 15 to obtain compliant 'eye' diagram. */ + port_ctl_status.s.txvreftune = 15; + port_ctl_status.s.txrisetune = 1; + port_ctl_status.s.txpreemphasistune = 1; + cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0), + port_ctl_status.u64); + } + + /* Step 3: Configure the reference clock, PHY, and HCLK */ + clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); + + /* + * If the UCTL looks like it has already been started, skip + * the initialization, otherwise bus errors are obtained. + */ + if (clk_rst_ctl.s.hrst) + goto end_clock; + /* 3a */ + clk_rst_ctl.s.p_por = 1; + clk_rst_ctl.s.hrst = 0; + clk_rst_ctl.s.p_prst = 0; + clk_rst_ctl.s.h_clkdiv_rst = 0; + clk_rst_ctl.s.o_clkdiv_rst = 0; + clk_rst_ctl.s.h_clkdiv_en = 0; + clk_rst_ctl.s.o_clkdiv_en = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3b */ + clk_rst_ctl.s.p_refclk_sel = is_crystal_clock ? 0 : 1; + switch (clock_rate) { + default: + pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n", + clock_rate); + /* Fall through */ + case 12000000: + clk_rst_ctl.s.p_refclk_div = 0; + break; + case 24000000: + clk_rst_ctl.s.p_refclk_div = 1; + break; + case 48000000: + clk_rst_ctl.s.p_refclk_div = 2; + break; + } + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3c */ + div = octeon_get_io_clock_rate() / 130000000ull; + + switch (div) { + case 0: + div = 1; + break; + case 1: + case 2: + case 3: + case 4: + break; + case 5: + div = 4; + break; + case 6: + case 7: + div = 6; + break; + case 8: + case 9: + case 10: + case 11: + div = 8; + break; + default: + div = 12; + break; + } + clk_rst_ctl.s.h_div = div; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + /* Read it back, */ + clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); + clk_rst_ctl.s.h_clkdiv_en = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + /* 3d */ + clk_rst_ctl.s.h_clkdiv_rst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3e: delay 64 io clocks */ + ndelay(io_clk_64_to_ns); + + /* + * Step 4: Program the power-on reset field in the UCTL + * clock-reset-control register. + */ + clk_rst_ctl.s.p_por = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 5: Wait 3 ms for the PHY clock to start. */ + mdelay(3); + + /* Steps 6..9 for ATE only, are skipped. */ + + /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */ + /* 10a */ + clk_rst_ctl.s.o_clkdiv_rst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 10b */ + clk_rst_ctl.s.o_clkdiv_en = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 10c */ + ndelay(io_clk_64_to_ns); + + /* + * Step 11: Program the PHY reset field: + * UCTL0_CLK_RST_CTL[P_PRST] = 1 + */ + clk_rst_ctl.s.p_prst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 11b */ + udelay(1); + + /* Step 11c */ + clk_rst_ctl.s.p_prst = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 11d */ + mdelay(1); + + /* Step 11e */ + clk_rst_ctl.s.p_prst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 12: Wait 1 uS. */ + udelay(1); + + /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */ + clk_rst_ctl.s.hrst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + +end_clock: + /* Set uSOF cycle period to 60,000 bits. */ + cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull); + +exit: + mutex_unlock(&octeon2_usb_clocks_mutex); +} + +static void octeon2_usb_clocks_stop(void) +{ + mutex_lock(&octeon2_usb_clocks_mutex); + octeon2_usb_clock_start_cnt--; + mutex_unlock(&octeon2_usb_clocks_mutex); +} + +static int octeon_ehci_power_on(struct platform_device *pdev) +{ + octeon2_usb_clocks_start(&pdev->dev); + return 0; +} + +static void octeon_ehci_power_off(struct platform_device *pdev) +{ + octeon2_usb_clocks_stop(); +} + +static struct usb_ehci_pdata octeon_ehci_pdata = { + /* Octeon EHCI matches CPU endianness. */ +#ifdef __BIG_ENDIAN + .big_endian_mmio = 1, +#endif + /* + * We can DMA from anywhere. But the descriptors must be in + * the lower 4GB. + */ + .dma_mask_64 = 0, + .power_on = octeon_ehci_power_on, + .power_off = octeon_ehci_power_off, +}; + +static void __init octeon_ehci_hw_start(struct device *dev) +{ + union cvmx_uctlx_ehci_ctl ehci_ctl; + + octeon2_usb_clocks_start(dev); + + ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0)); + /* Use 64-bit addressing. */ + ehci_ctl.s.ehci_64b_addr_en = 1; + ehci_ctl.s.l2c_addr_msb = 0; +#ifdef __BIG_ENDIAN + ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ + ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ +#else + ehci_ctl.s.l2c_buff_emod = 0; /* not swapped. */ + ehci_ctl.s.l2c_desc_emod = 0; /* not swapped. */ + ehci_ctl.s.inv_reg_a2 = 1; +#endif + cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64); + + octeon2_usb_clocks_stop(); +} + +static int __init octeon_ehci_device_init(void) +{ + struct platform_device *pd; + struct device_node *ehci_node; + int ret = 0; + + ehci_node = of_find_node_by_name(NULL, "ehci"); + if (!ehci_node) + return 0; + + pd = of_find_device_by_node(ehci_node); + of_node_put(ehci_node); + if (!pd) + return 0; + + pd->dev.platform_data = &octeon_ehci_pdata; + octeon_ehci_hw_start(&pd->dev); + put_device(&pd->dev); + + return ret; +} +device_initcall(octeon_ehci_device_init); + +static int octeon_ohci_power_on(struct platform_device *pdev) +{ + octeon2_usb_clocks_start(&pdev->dev); + return 0; +} + +static void octeon_ohci_power_off(struct platform_device *pdev) +{ + octeon2_usb_clocks_stop(); +} + +static struct usb_ohci_pdata octeon_ohci_pdata = { + /* Octeon OHCI matches CPU endianness. */ +#ifdef __BIG_ENDIAN + .big_endian_mmio = 1, +#endif + .power_on = octeon_ohci_power_on, + .power_off = octeon_ohci_power_off, +}; + +static void __init octeon_ohci_hw_start(struct device *dev) +{ + union cvmx_uctlx_ohci_ctl ohci_ctl; + + octeon2_usb_clocks_start(dev); + + ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0)); + ohci_ctl.s.l2c_addr_msb = 0; +#ifdef __BIG_ENDIAN + ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ + ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ +#else + ohci_ctl.s.l2c_buff_emod = 0; /* not swapped. */ + ohci_ctl.s.l2c_desc_emod = 0; /* not swapped. */ + ohci_ctl.s.inv_reg_a2 = 1; +#endif + cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64); + + octeon2_usb_clocks_stop(); +} + +static int __init octeon_ohci_device_init(void) +{ + struct platform_device *pd; + struct device_node *ohci_node; + int ret = 0; + + ohci_node = of_find_node_by_name(NULL, "ohci"); + if (!ohci_node) + return 0; + + pd = of_find_device_by_node(ohci_node); + of_node_put(ohci_node); + if (!pd) + return 0; + + pd->dev.platform_data = &octeon_ohci_pdata; + octeon_ohci_hw_start(&pd->dev); + put_device(&pd->dev); + + return ret; +} +device_initcall(octeon_ohci_device_init); + +#endif /* CONFIG_USB */ + +/* Octeon Random Number Generator. */ +static int __init octeon_rng_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + + struct resource rng_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS), + .end = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf + }, { + .flags = IORESOURCE_MEM, + .start = cvmx_build_io_address(8, 0), + .end = cvmx_build_io_address(8, 0) + 0x7 + } + }; + + pd = platform_device_alloc("octeon_rng", -1); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + ret = platform_device_add_resources(pd, rng_resources, + ARRAY_SIZE(rng_resources)); + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + + return ret; +fail: + platform_device_put(pd); + +out: + return ret; +} +device_initcall(octeon_rng_device_init); + +const struct of_device_id octeon_ids[] __initconst = { + { .compatible = "simple-bus", }, + { .compatible = "cavium,octeon-6335-uctl", }, + { .compatible = "cavium,octeon-5750-usbn", }, + { .compatible = "cavium,octeon-3860-bootbus", }, + { .compatible = "cavium,mdio-mux", }, + { .compatible = "gpio-leds", }, + { .compatible = "cavium,octeon-7130-usb-uctl", }, + {}, +}; + +static bool __init octeon_has_88e1145(void) +{ + return !OCTEON_IS_MODEL(OCTEON_CN52XX) && + !OCTEON_IS_MODEL(OCTEON_CN6XXX) && + !OCTEON_IS_MODEL(OCTEON_CN56XX); +} + +static void __init octeon_fdt_set_phy(int eth, int phy_addr) +{ + const __be32 *phy_handle; + const __be32 *alt_phy_handle; + const __be32 *reg; + u32 phandle; + int phy; + int alt_phy; + const char *p; + int current_len; + char new_name[20]; + + phy_handle = fdt_getprop(initial_boot_params, eth, "phy-handle", NULL); + if (!phy_handle) + return; + + phandle = be32_to_cpup(phy_handle); + phy = fdt_node_offset_by_phandle(initial_boot_params, phandle); + + alt_phy_handle = fdt_getprop(initial_boot_params, eth, "cavium,alt-phy-handle", NULL); + if (alt_phy_handle) { + u32 alt_phandle = be32_to_cpup(alt_phy_handle); + + alt_phy = fdt_node_offset_by_phandle(initial_boot_params, alt_phandle); + } else { + alt_phy = -1; + } + + if (phy_addr < 0 || phy < 0) { + /* Delete the PHY things */ + fdt_nop_property(initial_boot_params, eth, "phy-handle"); + /* This one may fail */ + fdt_nop_property(initial_boot_params, eth, "cavium,alt-phy-handle"); + if (phy >= 0) + fdt_nop_node(initial_boot_params, phy); + if (alt_phy >= 0) + fdt_nop_node(initial_boot_params, alt_phy); + return; + } + + if (phy_addr >= 256 && alt_phy > 0) { + const struct fdt_property *phy_prop; + struct fdt_property *alt_prop; + fdt32_t phy_handle_name; + + /* Use the alt phy node instead.*/ + phy_prop = fdt_get_property(initial_boot_params, eth, "phy-handle", NULL); + phy_handle_name = phy_prop->nameoff; + fdt_nop_node(initial_boot_params, phy); + fdt_nop_property(initial_boot_params, eth, "phy-handle"); + alt_prop = fdt_get_property_w(initial_boot_params, eth, "cavium,alt-phy-handle", NULL); + alt_prop->nameoff = phy_handle_name; + phy = alt_phy; + } + + phy_addr &= 0xff; + + if (octeon_has_88e1145()) { + fdt_nop_property(initial_boot_params, phy, "marvell,reg-init"); + memset(new_name, 0, sizeof(new_name)); + strcpy(new_name, "marvell,88e1145"); + p = fdt_getprop(initial_boot_params, phy, "compatible", + ¤t_len); + if (p && current_len >= strlen(new_name)) + fdt_setprop_inplace(initial_boot_params, phy, + "compatible", new_name, current_len); + } + + reg = fdt_getprop(initial_boot_params, phy, "reg", NULL); + if (phy_addr == be32_to_cpup(reg)) + return; + + fdt_setprop_inplace_cell(initial_boot_params, phy, "reg", phy_addr); + + snprintf(new_name, sizeof(new_name), "ethernet-phy@%x", phy_addr); + + p = fdt_get_name(initial_boot_params, phy, ¤t_len); + if (p && current_len == strlen(new_name)) + fdt_set_name(initial_boot_params, phy, new_name); + else + pr_err("Error: could not rename ethernet phy: <%s>", p); +} + +static void __init octeon_fdt_set_mac_addr(int n, u64 *pmac) +{ + const u8 *old_mac; + int old_len; + u8 new_mac[6]; + u64 mac = *pmac; + int r; + + old_mac = fdt_getprop(initial_boot_params, n, "local-mac-address", + &old_len); + if (!old_mac || old_len != 6 || is_valid_ether_addr(old_mac)) + return; + + new_mac[0] = (mac >> 40) & 0xff; + new_mac[1] = (mac >> 32) & 0xff; + new_mac[2] = (mac >> 24) & 0xff; + new_mac[3] = (mac >> 16) & 0xff; + new_mac[4] = (mac >> 8) & 0xff; + new_mac[5] = mac & 0xff; + + r = fdt_setprop_inplace(initial_boot_params, n, "local-mac-address", + new_mac, sizeof(new_mac)); + + if (r) { + pr_err("Setting \"local-mac-address\" failed %d", r); + return; + } + *pmac = mac + 1; +} + +static void __init octeon_fdt_rm_ethernet(int node) +{ + const __be32 *phy_handle; + + phy_handle = fdt_getprop(initial_boot_params, node, "phy-handle", NULL); + if (phy_handle) { + u32 ph = be32_to_cpup(phy_handle); + int p = fdt_node_offset_by_phandle(initial_boot_params, ph); + + if (p >= 0) + fdt_nop_node(initial_boot_params, p); + } + fdt_nop_node(initial_boot_params, node); +} + +static void __init octeon_fdt_pip_port(int iface, int i, int p, int max) +{ + char name_buffer[20]; + int eth; + int phy_addr; + int ipd_port; + + snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", p); + eth = fdt_subnode_offset(initial_boot_params, iface, name_buffer); + if (eth < 0) + return; + if (p > max) { + pr_debug("Deleting port %x:%x\n", i, p); + octeon_fdt_rm_ethernet(eth); + return; + } + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + ipd_port = (0x100 * i) + (0x10 * p) + 0x800; + else + ipd_port = 16 * i + p; + + phy_addr = cvmx_helper_board_get_mii_address(ipd_port); + octeon_fdt_set_phy(eth, phy_addr); +} + +static void __init octeon_fdt_pip_iface(int pip, int idx) +{ + char name_buffer[20]; + int iface; + int p; + int count = 0; + + snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx); + iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer); + if (iface < 0) + return; + + if (cvmx_helper_interface_enumerate(idx) == 0) + count = cvmx_helper_ports_on_interface(idx); + + for (p = 0; p < 16; p++) + octeon_fdt_pip_port(iface, idx, p, count - 1); +} + +void __init octeon_fill_mac_addresses(void) +{ + const char *alias_prop; + char name_buffer[20]; + u64 mac_addr_base; + int aliases; + int pip; + int i; + + aliases = fdt_path_offset(initial_boot_params, "/aliases"); + if (aliases < 0) + return; + + mac_addr_base = + ((octeon_bootinfo->mac_addr_base[0] & 0xffull)) << 40 | + ((octeon_bootinfo->mac_addr_base[1] & 0xffull)) << 32 | + ((octeon_bootinfo->mac_addr_base[2] & 0xffull)) << 24 | + ((octeon_bootinfo->mac_addr_base[3] & 0xffull)) << 16 | + ((octeon_bootinfo->mac_addr_base[4] & 0xffull)) << 8 | + (octeon_bootinfo->mac_addr_base[5] & 0xffull); + + for (i = 0; i < 2; i++) { + int mgmt; + + snprintf(name_buffer, sizeof(name_buffer), "mix%d", i); + alias_prop = fdt_getprop(initial_boot_params, aliases, + name_buffer, NULL); + if (!alias_prop) + continue; + mgmt = fdt_path_offset(initial_boot_params, alias_prop); + if (mgmt < 0) + continue; + octeon_fdt_set_mac_addr(mgmt, &mac_addr_base); + } + + alias_prop = fdt_getprop(initial_boot_params, aliases, "pip", NULL); + if (!alias_prop) + return; + + pip = fdt_path_offset(initial_boot_params, alias_prop); + if (pip < 0) + return; + + for (i = 0; i <= 4; i++) { + int iface; + int p; + + snprintf(name_buffer, sizeof(name_buffer), "interface@%d", i); + iface = fdt_subnode_offset(initial_boot_params, pip, + name_buffer); + if (iface < 0) + continue; + for (p = 0; p < 16; p++) { + int eth; + + snprintf(name_buffer, sizeof(name_buffer), + "ethernet@%x", p); + eth = fdt_subnode_offset(initial_boot_params, iface, + name_buffer); + if (eth < 0) + continue; + octeon_fdt_set_mac_addr(eth, &mac_addr_base); + } + } +} + +int __init octeon_prune_device_tree(void) +{ + int i, max_port, uart_mask; + const char *pip_path; + const char *alias_prop; + char name_buffer[20]; + int aliases; + + if (fdt_check_header(initial_boot_params)) + panic("Corrupt Device Tree."); + + WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_CUST_DSR1000N, + "Built-in DTB booting is deprecated on %s. Please switch to use appended DTB.", + cvmx_board_type_to_string(octeon_bootinfo->board_type)); + + aliases = fdt_path_offset(initial_boot_params, "/aliases"); + if (aliases < 0) { + pr_err("Error: No /aliases node in device tree."); + return -EINVAL; + } + + if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN63XX)) + max_port = 2; + else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN68XX)) + max_port = 1; + else + max_port = 0; + + if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E) + max_port = 0; + + for (i = 0; i < 2; i++) { + int mgmt; + + snprintf(name_buffer, sizeof(name_buffer), + "mix%d", i); + alias_prop = fdt_getprop(initial_boot_params, aliases, + name_buffer, NULL); + if (alias_prop) { + mgmt = fdt_path_offset(initial_boot_params, alias_prop); + if (mgmt < 0) + continue; + if (i >= max_port) { + pr_debug("Deleting mix%d\n", i); + octeon_fdt_rm_ethernet(mgmt); + fdt_nop_property(initial_boot_params, aliases, + name_buffer); + } else { + int phy_addr = cvmx_helper_board_get_mii_address(CVMX_HELPER_BOARD_MGMT_IPD_PORT + i); + + octeon_fdt_set_phy(mgmt, phy_addr); + } + } + } + + pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL); + if (pip_path) { + int pip = fdt_path_offset(initial_boot_params, pip_path); + + if (pip >= 0) + for (i = 0; i <= 4; i++) + octeon_fdt_pip_iface(pip, i); + } + + /* I2C */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX) || + OCTEON_IS_MODEL(OCTEON_CN63XX) || + OCTEON_IS_MODEL(OCTEON_CN68XX) || + OCTEON_IS_MODEL(OCTEON_CN56XX)) + max_port = 2; + else + max_port = 1; + + for (i = 0; i < 2; i++) { + int i2c; + + snprintf(name_buffer, sizeof(name_buffer), + "twsi%d", i); + alias_prop = fdt_getprop(initial_boot_params, aliases, + name_buffer, NULL); + + if (alias_prop) { + i2c = fdt_path_offset(initial_boot_params, alias_prop); + if (i2c < 0) + continue; + if (i >= max_port) { + pr_debug("Deleting twsi%d\n", i); + fdt_nop_node(initial_boot_params, i2c); + fdt_nop_property(initial_boot_params, aliases, + name_buffer); + } + } + } + + /* SMI/MDIO */ + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + max_port = 4; + else if (OCTEON_IS_MODEL(OCTEON_CN52XX) || + OCTEON_IS_MODEL(OCTEON_CN63XX) || + OCTEON_IS_MODEL(OCTEON_CN56XX)) + max_port = 2; + else + max_port = 1; + + for (i = 0; i < 2; i++) { + int i2c; + + snprintf(name_buffer, sizeof(name_buffer), + "smi%d", i); + alias_prop = fdt_getprop(initial_boot_params, aliases, + name_buffer, NULL); + if (alias_prop) { + i2c = fdt_path_offset(initial_boot_params, alias_prop); + if (i2c < 0) + continue; + if (i >= max_port) { + pr_debug("Deleting smi%d\n", i); + fdt_nop_node(initial_boot_params, i2c); + fdt_nop_property(initial_boot_params, aliases, + name_buffer); + } + } + } + + /* Serial */ + uart_mask = 3; + + /* Right now CN52XX is the only chip with a third uart */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + uart_mask |= 4; /* uart2 */ + + for (i = 0; i < 3; i++) { + int uart; + + snprintf(name_buffer, sizeof(name_buffer), + "uart%d", i); + alias_prop = fdt_getprop(initial_boot_params, aliases, + name_buffer, NULL); + + if (alias_prop) { + uart = fdt_path_offset(initial_boot_params, alias_prop); + if (uart_mask & (1 << i)) { + __be32 f; + + f = cpu_to_be32(octeon_get_io_clock_rate()); + fdt_setprop_inplace(initial_boot_params, + uart, "clock-frequency", + &f, sizeof(f)); + continue; + } + pr_debug("Deleting uart%d\n", i); + fdt_nop_node(initial_boot_params, uart); + fdt_nop_property(initial_boot_params, aliases, + name_buffer); + } + } + + /* Compact Flash */ + alias_prop = fdt_getprop(initial_boot_params, aliases, + "cf0", NULL); + if (alias_prop) { + union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; + unsigned long base_ptr, region_base, region_size; + unsigned long region1_base = 0; + unsigned long region1_size = 0; + int cs, bootbus; + bool is_16bit = false; + bool is_true_ide = false; + __be32 new_reg[6]; + __be32 *ranges; + int len; + + int cf = fdt_path_offset(initial_boot_params, alias_prop); + + base_ptr = 0; + if (octeon_bootinfo->major_version == 1 + && octeon_bootinfo->minor_version >= 1) { + if (octeon_bootinfo->compact_flash_common_base_addr) + base_ptr = octeon_bootinfo->compact_flash_common_base_addr; + } else { + base_ptr = 0x1d000800; + } + + if (!base_ptr) + goto no_cf; + + /* Find CS0 region. */ + for (cs = 0; cs < 8; cs++) { + mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs)); + region_base = mio_boot_reg_cfg.s.base << 16; + region_size = (mio_boot_reg_cfg.s.size + 1) << 16; + if (mio_boot_reg_cfg.s.en && base_ptr >= region_base + && base_ptr < region_base + region_size) { + is_16bit = mio_boot_reg_cfg.s.width; + break; + } + } + if (cs >= 7) { + /* cs and cs + 1 are CS0 and CS1, both must be less than 8. */ + goto no_cf; + } + + if (!(base_ptr & 0xfffful)) { + /* + * Boot loader signals availability of DMA (true_ide + * mode) by setting low order bits of base_ptr to + * zero. + */ + + /* Asume that CS1 immediately follows. */ + mio_boot_reg_cfg.u64 = + cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs + 1)); + region1_base = mio_boot_reg_cfg.s.base << 16; + region1_size = (mio_boot_reg_cfg.s.size + 1) << 16; + if (!mio_boot_reg_cfg.s.en) + goto no_cf; + is_true_ide = true; + + } else { + fdt_nop_property(initial_boot_params, cf, "cavium,true-ide"); + fdt_nop_property(initial_boot_params, cf, "cavium,dma-engine-handle"); + if (!is_16bit) { + __be32 width = cpu_to_be32(8); + + fdt_setprop_inplace(initial_boot_params, cf, + "cavium,bus-width", &width, sizeof(width)); + } + } + new_reg[0] = cpu_to_be32(cs); + new_reg[1] = cpu_to_be32(0); + new_reg[2] = cpu_to_be32(0x10000); + new_reg[3] = cpu_to_be32(cs + 1); + new_reg[4] = cpu_to_be32(0); + new_reg[5] = cpu_to_be32(0x10000); + fdt_setprop_inplace(initial_boot_params, cf, + "reg", new_reg, sizeof(new_reg)); + + bootbus = fdt_parent_offset(initial_boot_params, cf); + if (bootbus < 0) + goto no_cf; + ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len); + if (!ranges || len < (5 * 8 * sizeof(__be32))) + goto no_cf; + + ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32); + ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff); + ranges[(cs * 5) + 4] = cpu_to_be32(region_size); + if (is_true_ide) { + cs++; + ranges[(cs * 5) + 2] = cpu_to_be32(region1_base >> 32); + ranges[(cs * 5) + 3] = cpu_to_be32(region1_base & 0xffffffff); + ranges[(cs * 5) + 4] = cpu_to_be32(region1_size); + } + goto end_cf; +no_cf: + fdt_nop_node(initial_boot_params, cf); + +end_cf: + ; + } + + /* 8 char LED */ + alias_prop = fdt_getprop(initial_boot_params, aliases, + "led0", NULL); + if (alias_prop) { + union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; + unsigned long base_ptr, region_base, region_size; + int cs, bootbus; + __be32 new_reg[6]; + __be32 *ranges; + int len; + int led = fdt_path_offset(initial_boot_params, alias_prop); + + base_ptr = octeon_bootinfo->led_display_base_addr; + if (base_ptr == 0) + goto no_led; + /* Find CS0 region. */ + for (cs = 0; cs < 8; cs++) { + mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs)); + region_base = mio_boot_reg_cfg.s.base << 16; + region_size = (mio_boot_reg_cfg.s.size + 1) << 16; + if (mio_boot_reg_cfg.s.en && base_ptr >= region_base + && base_ptr < region_base + region_size) + break; + } + + if (cs > 7) + goto no_led; + + new_reg[0] = cpu_to_be32(cs); + new_reg[1] = cpu_to_be32(0x20); + new_reg[2] = cpu_to_be32(0x20); + new_reg[3] = cpu_to_be32(cs); + new_reg[4] = cpu_to_be32(0); + new_reg[5] = cpu_to_be32(0x20); + fdt_setprop_inplace(initial_boot_params, led, + "reg", new_reg, sizeof(new_reg)); + + bootbus = fdt_parent_offset(initial_boot_params, led); + if (bootbus < 0) + goto no_led; + ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len); + if (!ranges || len < (5 * 8 * sizeof(__be32))) + goto no_led; + + ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32); + ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff); + ranges[(cs * 5) + 4] = cpu_to_be32(region_size); + goto end_led; + +no_led: + fdt_nop_node(initial_boot_params, led); +end_led: + ; + } + +#ifdef CONFIG_USB + /* OHCI/UHCI USB */ + alias_prop = fdt_getprop(initial_boot_params, aliases, + "uctl", NULL); + if (alias_prop) { + int uctl = fdt_path_offset(initial_boot_params, alias_prop); + + if (uctl >= 0 && (!OCTEON_IS_MODEL(OCTEON_CN6XXX) || + octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC2E)) { + pr_debug("Deleting uctl\n"); + fdt_nop_node(initial_boot_params, uctl); + fdt_nop_property(initial_boot_params, aliases, "uctl"); + } else if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E || + octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC4E) { + /* Missing "refclk-type" defaults to crystal. */ + fdt_nop_property(initial_boot_params, uctl, "refclk-type"); + } + } + + /* DWC2 USB */ + alias_prop = fdt_getprop(initial_boot_params, aliases, + "usbn", NULL); + if (alias_prop) { + int usbn = fdt_path_offset(initial_boot_params, alias_prop); + + if (usbn >= 0 && (current_cpu_type() == CPU_CAVIUM_OCTEON2 || + !octeon_has_feature(OCTEON_FEATURE_USB))) { + pr_debug("Deleting usbn\n"); + fdt_nop_node(initial_boot_params, usbn); + fdt_nop_property(initial_boot_params, aliases, "usbn"); + } else { + __be32 new_f[1]; + enum cvmx_helper_board_usb_clock_types c; + + c = __cvmx_helper_board_usb_get_clock_type(); + switch (c) { + case USB_CLOCK_TYPE_REF_48: + new_f[0] = cpu_to_be32(48000000); + fdt_setprop_inplace(initial_boot_params, usbn, + "refclk-frequency", new_f, sizeof(new_f)); + /* Fall through ...*/ + case USB_CLOCK_TYPE_REF_12: + /* Missing "refclk-type" defaults to external. */ + fdt_nop_property(initial_boot_params, usbn, "refclk-type"); + break; + default: + break; + } + } + } +#endif + + return 0; +} + +static int __init octeon_publish_devices(void) +{ + return of_platform_populate(NULL, octeon_ids, NULL, NULL); +} +arch_initcall(octeon_publish_devices); diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c new file mode 100644 index 000000000..3465452e2 --- /dev/null +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -0,0 +1,556 @@ +/* + * XHCI HCD glue for Cavium Octeon III SOCs. + * + * Copyright (C) 2010-2017 Cavium Networks + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/of_platform.h> +#include <linux/io.h> + +#include <asm/octeon/octeon.h> + +/* USB Control Register */ +union cvm_usbdrd_uctl_ctl { + uint64_t u64; + struct cvm_usbdrd_uctl_ctl_s { + /* 1 = BIST and set all USB RAMs to 0x0, 0 = BIST */ + __BITFIELD_FIELD(uint64_t clear_bist:1, + /* 1 = Start BIST and cleared by hardware */ + __BITFIELD_FIELD(uint64_t start_bist:1, + /* Reference clock select for SuperSpeed and HighSpeed PLLs: + * 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock + * 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock + * 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + * 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + */ + __BITFIELD_FIELD(uint64_t ref_clk_sel:2, + /* 1 = Spread-spectrum clock enable, 0 = SS clock disable */ + __BITFIELD_FIELD(uint64_t ssc_en:1, + /* Spread-spectrum clock modulation range: + * 0x0 = -4980 ppm downspread + * 0x1 = -4492 ppm downspread + * 0x2 = -4003 ppm downspread + * 0x3 - 0x7 = Reserved + */ + __BITFIELD_FIELD(uint64_t ssc_range:3, + /* Enable non-standard oscillator frequencies: + * [55:53] = modules -1 + * [52:47] = 2's complement push amount, 0 = Feature disabled + */ + __BITFIELD_FIELD(uint64_t ssc_ref_clk_sel:9, + /* Reference clock multiplier for non-standard frequencies: + * 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * Other Values = Reserved + */ + __BITFIELD_FIELD(uint64_t mpll_multiplier:7, + /* Enable reference clock to prescaler for SuperSpeed functionality. + * Should always be set to "1" + */ + __BITFIELD_FIELD(uint64_t ref_ssp_en:1, + /* Divide the reference clock by 2 before entering the + * REF_CLK_FSEL divider: + * If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal + * If REF_CLK_SEL = 0x2 or 0x3, then: + * 0x1 = DLMC_REF_CLK* is 125MHz + * 0x0 = DLMC_REF_CLK* is another supported frequency + */ + __BITFIELD_FIELD(uint64_t ref_clk_div2:1, + /* Select reference clock freqnuency for both PLL blocks: + * 0x27 = REF_CLK_SEL is 0x0 or 0x1 + * 0x07 = REF_CLK_SEL is 0x2 or 0x3 + */ + __BITFIELD_FIELD(uint64_t ref_clk_fsel:6, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_31_31:1, + /* Controller clock enable. */ + __BITFIELD_FIELD(uint64_t h_clk_en:1, + /* Select bypass input to controller clock divider: + * 0x0 = Use divided coprocessor clock from H_CLKDIV + * 0x1 = Use clock from GPIO pins + */ + __BITFIELD_FIELD(uint64_t h_clk_byp_sel:1, + /* Reset controller clock divider. */ + __BITFIELD_FIELD(uint64_t h_clkdiv_rst:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_27_27:1, + /* Clock divider select: + * 0x0 = divide by 1 + * 0x1 = divide by 2 + * 0x2 = divide by 4 + * 0x3 = divide by 6 + * 0x4 = divide by 8 + * 0x5 = divide by 16 + * 0x6 = divide by 24 + * 0x7 = divide by 32 + */ + __BITFIELD_FIELD(uint64_t h_clkdiv_sel:3, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_22_23:2, + /* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */ + __BITFIELD_FIELD(uint64_t usb3_port_perm_attach:1, + /* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */ + __BITFIELD_FIELD(uint64_t usb2_port_perm_attach:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_19_19:1, + /* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */ + __BITFIELD_FIELD(uint64_t usb3_port_disable:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_17_17:1, + /* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */ + __BITFIELD_FIELD(uint64_t usb2_port_disable:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_15_15:1, + /* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */ + __BITFIELD_FIELD(uint64_t ss_power_en:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_13_13:1, + /* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */ + __BITFIELD_FIELD(uint64_t hs_power_en:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_5_11:7, + /* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */ + __BITFIELD_FIELD(uint64_t csclk_en:1, + /* Controller mode: 0x0 = Host, 0x1 = Device */ + __BITFIELD_FIELD(uint64_t drd_mode:1, + /* PHY reset */ + __BITFIELD_FIELD(uint64_t uphy_rst:1, + /* Software reset UAHC */ + __BITFIELD_FIELD(uint64_t uahc_rst:1, + /* Software resets UCTL */ + __BITFIELD_FIELD(uint64_t uctl_rst:1, + ;))))))))))))))))))))))))))))))))) + } s; +}; + +/* UAHC Configuration Register */ +union cvm_usbdrd_uctl_host_cfg { + uint64_t u64; + struct cvm_usbdrd_uctl_host_cfg_s { + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_60_63:4, + /* Indicates minimum value of all received BELT values */ + __BITFIELD_FIELD(uint64_t host_current_belt:12, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_38_47:10, + /* HS jitter adjustment */ + __BITFIELD_FIELD(uint64_t fla:6, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_29_31:3, + /* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */ + __BITFIELD_FIELD(uint64_t bme:1, + /* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */ + __BITFIELD_FIELD(uint64_t oci_en:1, + /* Overcurrent sene selection: + * 0x0 = Overcurrent indication from off-chip is active-low + * 0x1 = Overcurrent indication from off-chip is active-high + */ + __BITFIELD_FIELD(uint64_t oci_active_high_en:1, + /* Port power control enable: 0x0 = unavailable, 0x1 = available */ + __BITFIELD_FIELD(uint64_t ppc_en:1, + /* Port power control sense selection: + * 0x0 = Port power to off-chip is active-low + * 0x1 = Port power to off-chip is active-high + */ + __BITFIELD_FIELD(uint64_t ppc_active_high_en:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_0_23:24, + ;))))))))))) + } s; +}; + +/* UCTL Shim Features Register */ +union cvm_usbdrd_uctl_shim_cfg { + uint64_t u64; + struct cvm_usbdrd_uctl_shim_cfg_s { + /* Out-of-bound UAHC register access: 0 = read, 1 = write */ + __BITFIELD_FIELD(uint64_t xs_ncb_oob_wrn:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_60_62:3, + /* SRCID error log for out-of-bound UAHC register access: + * [59:58] = chipID + * [57] = Request source: 0 = core, 1 = NCB-device + * [56:51] = Core/NCB-device number, [56] always 0 for NCB devices + * [50:48] = SubID + */ + __BITFIELD_FIELD(uint64_t xs_ncb_oob_osrc:12, + /* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */ + __BITFIELD_FIELD(uint64_t xm_bad_dma_wrn:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_44_46:3, + /* Encoded error type for bad UAHC DMA */ + __BITFIELD_FIELD(uint64_t xm_bad_dma_type:4, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_13_39:27, + /* Select the IOI read command used by DMA accesses */ + __BITFIELD_FIELD(uint64_t dma_read_cmd:1, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_10_11:2, + /* Select endian format for DMA accesses to the L2c: + * 0x0 = Little endian + *` 0x1 = Big endian + * 0x2 = Reserved + * 0x3 = Reserved + */ + __BITFIELD_FIELD(uint64_t dma_endian_mode:2, + /* Reserved */ + __BITFIELD_FIELD(uint64_t reserved_2_7:6, + /* Select endian format for IOI CSR access to UAHC: + * 0x0 = Little endian + *` 0x1 = Big endian + * 0x2 = Reserved + * 0x3 = Reserved + */ + __BITFIELD_FIELD(uint64_t csr_endian_mode:2, + ;)))))))))))) + } s; +}; + +#define OCTEON_H_CLKDIV_SEL 8 +#define OCTEON_MIN_H_CLK_RATE 150000000 +#define OCTEON_MAX_H_CLK_RATE 300000000 + +static DEFINE_MUTEX(dwc3_octeon_clocks_mutex); +static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32}; + + +static int dwc3_octeon_config_power(struct device *dev, u64 base) +{ +#define UCTL_HOST_CFG 0xe0 + union cvm_usbdrd_uctl_host_cfg uctl_host_cfg; + union cvmx_gpio_bit_cfgx gpio_bit; + uint32_t gpio_pwr[3]; + int gpio, len, power_active_low; + struct device_node *node = dev->of_node; + int index = (base >> 24) & 1; + + if (of_find_property(node, "power", &len) != NULL) { + if (len == 12) { + of_property_read_u32_array(node, "power", gpio_pwr, 3); + power_active_low = gpio_pwr[2] & 0x01; + gpio = gpio_pwr[1]; + } else if (len == 8) { + of_property_read_u32_array(node, "power", gpio_pwr, 2); + power_active_low = 0; + gpio = gpio_pwr[1]; + } else { + dev_err(dev, "dwc3 controller clock init failure.\n"); + return -EINVAL; + } + if ((OCTEON_IS_MODEL(OCTEON_CN73XX) || + OCTEON_IS_MODEL(OCTEON_CNF75XX)) + && gpio <= 31) { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.cn73xx.output_sel = (index == 0 ? 0x14 : 0x15); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); + } else if (gpio <= 15) { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.cn70xx.output_sel = (index == 0 ? 0x14 : 0x19); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); + } else { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.cn70xx.output_sel = (index == 0 ? 0x14 : 0x19); + cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64); + } + + /* Enable XHCI power control and set if active high or low. */ + uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG); + uctl_host_cfg.s.ppc_en = 1; + uctl_host_cfg.s.ppc_active_high_en = !power_active_low; + cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64); + } else { + /* Disable XHCI power control and set if active high. */ + uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG); + uctl_host_cfg.s.ppc_en = 0; + uctl_host_cfg.s.ppc_active_high_en = 0; + cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64); + dev_warn(dev, "dwc3 controller clock init failure.\n"); + } + return 0; +} + +static int dwc3_octeon_clocks_start(struct device *dev, u64 base) +{ + union cvm_usbdrd_uctl_ctl uctl_ctl; + int ref_clk_sel = 2; + u64 div; + u32 clock_rate; + int mpll_mul; + int i; + u64 h_clk_rate; + u64 uctl_ctl_reg = base; + + if (dev->of_node) { + const char *ss_clock_type; + const char *hs_clock_type; + + i = of_property_read_u32(dev->of_node, + "refclk-frequency", &clock_rate); + if (i) { + pr_err("No UCTL \"refclk-frequency\"\n"); + return -EINVAL; + } + i = of_property_read_string(dev->of_node, + "refclk-type-ss", &ss_clock_type); + if (i) { + pr_err("No UCTL \"refclk-type-ss\"\n"); + return -EINVAL; + } + i = of_property_read_string(dev->of_node, + "refclk-type-hs", &hs_clock_type); + if (i) { + pr_err("No UCTL \"refclk-type-hs\"\n"); + return -EINVAL; + } + if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) { + if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0) + ref_clk_sel = 0; + else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) + ref_clk_sel = 2; + else + pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n", + hs_clock_type); + } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) { + if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0) + ref_clk_sel = 1; + else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) + ref_clk_sel = 3; + else { + pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n", + hs_clock_type); + ref_clk_sel = 3; + } + } else + pr_err("Invalid SS clock type %s, using dlmc_ref_clk0 instead\n", + ss_clock_type); + + if ((ref_clk_sel == 0 || ref_clk_sel == 1) && + (clock_rate != 100000000)) + pr_err("Invalid UCTL clock rate of %u, using 100000000 instead\n", + clock_rate); + + } else { + pr_err("No USB UCTL device node\n"); + return -EINVAL; + } + + /* + * Step 1: Wait for all voltages to be stable...that surely + * happened before starting the kernel. SKIP + */ + + /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */ + + /* Step 3: Assert all resets. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.uphy_rst = 1; + uctl_ctl.s.uahc_rst = 1; + uctl_ctl.s.uctl_rst = 1; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + /* Step 4a: Reset the clock dividers. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.h_clkdiv_rst = 1; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + /* Step 4b: Select controller clock frequency. */ + for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) { + h_clk_rate = octeon_get_io_clock_rate() / clk_div[div]; + if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE && + h_clk_rate >= OCTEON_MIN_H_CLK_RATE) + break; + } + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.h_clkdiv_sel = div; + uctl_ctl.s.h_clk_en = 1; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + if ((div != uctl_ctl.s.h_clkdiv_sel) || (!uctl_ctl.s.h_clk_en)) { + dev_err(dev, "dwc3 controller clock init failure.\n"); + return -EINVAL; + } + + /* Step 4c: Deassert the controller clock divider reset. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.h_clkdiv_rst = 0; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + /* Step 5a: Reference clock configuration. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.ref_clk_sel = ref_clk_sel; + uctl_ctl.s.ref_clk_fsel = 0x07; + uctl_ctl.s.ref_clk_div2 = 0; + switch (clock_rate) { + default: + dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n", + clock_rate); + case 100000000: + mpll_mul = 0x19; + if (ref_clk_sel < 2) + uctl_ctl.s.ref_clk_fsel = 0x27; + break; + case 50000000: + mpll_mul = 0x32; + break; + case 125000000: + mpll_mul = 0x28; + break; + } + uctl_ctl.s.mpll_multiplier = mpll_mul; + + /* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */ + uctl_ctl.s.ssc_en = 1; + + /* Step 5c: Enable SuperSpeed. */ + uctl_ctl.s.ref_ssp_en = 1; + + /* Step 5d: Cofngiure PHYs. SKIP */ + + /* Step 6a & 6b: Power up PHYs. */ + uctl_ctl.s.hs_power_en = 1; + uctl_ctl.s.ss_power_en = 1; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + /* Step 7: Wait 10 controller-clock cycles to take effect. */ + udelay(10); + + /* Step 8a: Deassert UCTL reset signal. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.uctl_rst = 0; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + /* Step 8b: Wait 10 controller-clock cycles. */ + udelay(10); + + /* Steo 8c: Setup power-power control. */ + if (dwc3_octeon_config_power(dev, base)) { + dev_err(dev, "Error configuring power.\n"); + return -EINVAL; + } + + /* Step 8d: Deassert UAHC reset signal. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.uahc_rst = 0; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + /* Step 8e: Wait 10 controller-clock cycles. */ + udelay(10); + + /* Step 9: Enable conditional coprocessor clock of UCTL. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.csclk_en = 1; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + /*Step 10: Set for host mode only. */ + uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); + uctl_ctl.s.drd_mode = 0; + cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + + return 0; +} + +static void __init dwc3_octeon_set_endian_mode(u64 base) +{ +#define UCTL_SHIM_CFG 0xe8 + union cvm_usbdrd_uctl_shim_cfg shim_cfg; + + shim_cfg.u64 = cvmx_read_csr(base + UCTL_SHIM_CFG); +#ifdef __BIG_ENDIAN + shim_cfg.s.dma_endian_mode = 1; + shim_cfg.s.csr_endian_mode = 1; +#else + shim_cfg.s.dma_endian_mode = 0; + shim_cfg.s.csr_endian_mode = 0; +#endif + cvmx_write_csr(base + UCTL_SHIM_CFG, shim_cfg.u64); +} + +#define CVMX_USBDRDX_UCTL_CTL(index) \ + (CVMX_ADD_IO_SEG(0x0001180068000000ull) + \ + ((index & 1) * 0x1000000ull)) +static void __init dwc3_octeon_phy_reset(u64 base) +{ + union cvm_usbdrd_uctl_ctl uctl_ctl; + int index = (base >> 24) & 1; + + uctl_ctl.u64 = cvmx_read_csr(CVMX_USBDRDX_UCTL_CTL(index)); + uctl_ctl.s.uphy_rst = 0; + cvmx_write_csr(CVMX_USBDRDX_UCTL_CTL(index), uctl_ctl.u64); +} + +static int __init dwc3_octeon_device_init(void) +{ + const char compat_node_name[] = "cavium,octeon-7130-usb-uctl"; + struct platform_device *pdev; + struct device_node *node; + struct resource *res; + void __iomem *base; + + /* + * There should only be three universal controllers, "uctl" + * in the device tree. Two USB and a SATA, which we ignore. + */ + node = NULL; + do { + node = of_find_node_by_name(node, "uctl"); + if (!node) + return -ENODEV; + + if (of_device_is_compatible(node, compat_node_name)) { + pdev = of_find_device_by_node(node); + if (!pdev) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + put_device(&pdev->dev); + dev_err(&pdev->dev, "No memory resources\n"); + return -ENXIO; + } + + /* + * The code below maps in the registers necessary for + * setting up the clocks and reseting PHYs. We must + * release the resources so the dwc3 subsystem doesn't + * know the difference. + */ + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) { + put_device(&pdev->dev); + return PTR_ERR(base); + } + + mutex_lock(&dwc3_octeon_clocks_mutex); + dwc3_octeon_clocks_start(&pdev->dev, (u64)base); + dwc3_octeon_set_endian_mode((u64)base); + dwc3_octeon_phy_reset((u64)base); + dev_info(&pdev->dev, "clocks initialized.\n"); + mutex_unlock(&dwc3_octeon_clocks_mutex); + devm_iounmap(&pdev->dev, base); + devm_release_mem_region(&pdev->dev, res->start, + resource_size(res)); + put_device(&pdev->dev); + } + } while (node != NULL); + + return 0; +} +device_initcall(dwc3_octeon_device_init); + +MODULE_AUTHOR("David Daney <david.daney@cavium.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("USB driver for OCTEON III SoC"); diff --git a/arch/mips/cavium-octeon/octeon_boot.h b/arch/mips/cavium-octeon/octeon_boot.h new file mode 100644 index 000000000..a6ce7c43e --- /dev/null +++ b/arch/mips/cavium-octeon/octeon_boot.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2004, 2005 Cavium Networks + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __OCTEON_BOOT_H__ +#define __OCTEON_BOOT_H__ + +#include <linux/types.h> + +struct boot_init_vector { + /* First stage address - in ram instead of flash */ + uint64_t code_addr; + /* Setup code for application, NOT application entry point */ + uint32_t app_start_func_addr; + /* k0 is used for global data - needs to be passed to other cores */ + uint32_t k0_val; + /* Address of boot info block structure */ + uint64_t boot_info_addr; + uint32_t flags; /* flags */ + uint32_t pad; +}; + +/* similar to bootloader's linux_app_boot_info but without global data */ +struct linux_app_boot_info { +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t labi_signature; + uint32_t start_core0_addr; + uint32_t avail_coremask; + uint32_t pci_console_active; + uint32_t icache_prefetch_disable; + uint32_t padding; + uint64_t InitTLBStart_addr; + uint32_t start_app_addr; + uint32_t cur_exception_base; + uint32_t no_mark_private_data; + uint32_t compact_flash_common_base_addr; + uint32_t compact_flash_attribute_base_addr; + uint32_t led_display_base_addr; +#else + uint32_t start_core0_addr; + uint32_t labi_signature; + + uint32_t pci_console_active; + uint32_t avail_coremask; + + uint32_t padding; + uint32_t icache_prefetch_disable; + + uint64_t InitTLBStart_addr; + + uint32_t cur_exception_base; + uint32_t start_app_addr; + + uint32_t compact_flash_common_base_addr; + uint32_t no_mark_private_data; + + uint32_t led_display_base_addr; + uint32_t compact_flash_attribute_base_addr; +#endif +}; + +/* If not to copy a lot of bootloader's structures + here is only offset of requested member */ +#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK 0x765c + +/* hardcoded in bootloader */ +#define LABI_ADDR_IN_BOOTLOADER 0x700 + +#define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot" + +#define LABI_SIGNATURE 0xAABBCC01 + +/* from uboot-headers/octeon_mem_map.h */ +#define EXCEPTION_BASE_INCR (4 * 1024) + /* Increment size for exception base addresses (4k minimum) */ +#define EXCEPTION_BASE_BASE 0 +#define BOOTLOADER_PRIV_DATA_BASE (EXCEPTION_BASE_BASE + 0x800) +#define BOOTLOADER_BOOT_VECTOR (BOOTLOADER_PRIV_DATA_BASE) + +#endif /* __OCTEON_BOOT_H__ */ diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c new file mode 100644 index 000000000..c2426232d --- /dev/null +++ b/arch/mips/cavium-octeon/setup.c @@ -0,0 +1,1274 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2007 Cavium Networks + * Copyright (C) 2008, 2009 Wind River Systems + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/compiler.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/serial.h> +#include <linux/smp.h> +#include <linux/types.h> +#include <linux/string.h> /* for memset */ +#include <linux/tty.h> +#include <linux/time.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/of_fdt.h> +#include <linux/libfdt.h> +#include <linux/kexec.h> + +#include <asm/processor.h> +#include <asm/reboot.h> +#include <asm/smp-ops.h> +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/bootinfo.h> +#include <asm/sections.h> +#include <asm/setup.h> +#include <asm/time.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/pci-octeon.h> +#include <asm/octeon/cvmx-rst-defs.h> + +/* + * TRUE for devices having registers with little-endian byte + * order, FALSE for registers with native-endian byte order. + * PCI mandates little-endian, USB and SATA are configuraable, + * but we chose little-endian for these. + */ +const bool octeon_should_swizzle_table[256] = { + [0x00] = true, /* bootbus/CF */ + [0x1b] = true, /* PCI mmio window */ + [0x1c] = true, /* PCI mmio window */ + [0x1d] = true, /* PCI mmio window */ + [0x1e] = true, /* PCI mmio window */ + [0x68] = true, /* OCTEON III USB */ + [0x69] = true, /* OCTEON III USB */ + [0x6c] = true, /* OCTEON III SATA */ + [0x6f] = true, /* OCTEON II USB */ +}; +EXPORT_SYMBOL(octeon_should_swizzle_table); + +#ifdef CONFIG_PCI +extern void pci_console_init(const char *arg); +#endif + +static unsigned long long max_memory = ULLONG_MAX; +static unsigned long long reserve_low_mem; + +DEFINE_SEMAPHORE(octeon_bootbus_sem); +EXPORT_SYMBOL(octeon_bootbus_sem); + +struct octeon_boot_descriptor *octeon_boot_desc_ptr; + +struct cvmx_bootinfo *octeon_bootinfo; +EXPORT_SYMBOL(octeon_bootinfo); + +#ifdef CONFIG_KEXEC +#ifdef CONFIG_SMP +/* + * Wait for relocation code is prepared and send + * secondary CPUs to spin until kernel is relocated. + */ +static void octeon_kexec_smp_down(void *ignored) +{ + int cpu = smp_processor_id(); + + local_irq_disable(); + set_cpu_online(cpu, false); + while (!atomic_read(&kexec_ready_to_reboot)) + cpu_relax(); + + asm volatile ( + " sync \n" + " synci ($0) \n"); + + relocated_kexec_smp_wait(NULL); +} +#endif + +#define OCTEON_DDR0_BASE (0x0ULL) +#define OCTEON_DDR0_SIZE (0x010000000ULL) +#define OCTEON_DDR1_BASE (0x410000000ULL) +#define OCTEON_DDR1_SIZE (0x010000000ULL) +#define OCTEON_DDR2_BASE (0x020000000ULL) +#define OCTEON_DDR2_SIZE (0x3e0000000ULL) +#define OCTEON_MAX_PHY_MEM_SIZE (16*1024*1024*1024ULL) + +static struct kimage *kimage_ptr; + +static void kexec_bootmem_init(uint64_t mem_size, uint32_t low_reserved_bytes) +{ + int64_t addr; + struct cvmx_bootmem_desc *bootmem_desc; + + bootmem_desc = cvmx_bootmem_get_desc(); + + if (mem_size > OCTEON_MAX_PHY_MEM_SIZE) { + mem_size = OCTEON_MAX_PHY_MEM_SIZE; + pr_err("Error: requested memory too large," + "truncating to maximum size\n"); + } + + bootmem_desc->major_version = CVMX_BOOTMEM_DESC_MAJ_VER; + bootmem_desc->minor_version = CVMX_BOOTMEM_DESC_MIN_VER; + + addr = (OCTEON_DDR0_BASE + reserve_low_mem + low_reserved_bytes); + bootmem_desc->head_addr = 0; + + if (mem_size <= OCTEON_DDR0_SIZE) { + __cvmx_bootmem_phy_free(addr, + mem_size - reserve_low_mem - + low_reserved_bytes, 0); + return; + } + + __cvmx_bootmem_phy_free(addr, + OCTEON_DDR0_SIZE - reserve_low_mem - + low_reserved_bytes, 0); + + mem_size -= OCTEON_DDR0_SIZE; + + if (mem_size > OCTEON_DDR1_SIZE) { + __cvmx_bootmem_phy_free(OCTEON_DDR1_BASE, OCTEON_DDR1_SIZE, 0); + __cvmx_bootmem_phy_free(OCTEON_DDR2_BASE, + mem_size - OCTEON_DDR1_SIZE, 0); + } else + __cvmx_bootmem_phy_free(OCTEON_DDR1_BASE, mem_size, 0); +} + +static int octeon_kexec_prepare(struct kimage *image) +{ + int i; + char *bootloader = "kexec"; + + octeon_boot_desc_ptr->argc = 0; + for (i = 0; i < image->nr_segments; i++) { + if (!strncmp(bootloader, (char *)image->segment[i].buf, + strlen(bootloader))) { + /* + * convert command line string to array + * of parameters (as bootloader does). + */ + int argc = 0, offt; + char *str = (char *)image->segment[i].buf; + char *ptr = strchr(str, ' '); + while (ptr && (OCTEON_ARGV_MAX_ARGS > argc)) { + *ptr = '\0'; + if (ptr[1] != ' ') { + offt = (int)(ptr - str + 1); + octeon_boot_desc_ptr->argv[argc] = + image->segment[i].mem + offt; + argc++; + } + ptr = strchr(ptr + 1, ' '); + } + octeon_boot_desc_ptr->argc = argc; + break; + } + } + + /* + * Information about segments will be needed during pre-boot memory + * initialization. + */ + kimage_ptr = image; + return 0; +} + +static void octeon_generic_shutdown(void) +{ + int i; +#ifdef CONFIG_SMP + int cpu; +#endif + struct cvmx_bootmem_desc *bootmem_desc; + void *named_block_array_ptr; + + bootmem_desc = cvmx_bootmem_get_desc(); + named_block_array_ptr = + cvmx_phys_to_ptr(bootmem_desc->named_block_array_addr); + +#ifdef CONFIG_SMP + /* disable watchdogs */ + for_each_online_cpu(cpu) + cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0); +#else + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); +#endif + if (kimage_ptr != kexec_crash_image) { + memset(named_block_array_ptr, + 0x0, + CVMX_BOOTMEM_NUM_NAMED_BLOCKS * + sizeof(struct cvmx_bootmem_named_block_desc)); + /* + * Mark all memory (except low 0x100000 bytes) as free. + * It is the same thing that bootloader does. + */ + kexec_bootmem_init(octeon_bootinfo->dram_size*1024ULL*1024ULL, + 0x100000); + /* + * Allocate all segments to avoid their corruption during boot. + */ + for (i = 0; i < kimage_ptr->nr_segments; i++) + cvmx_bootmem_alloc_address( + kimage_ptr->segment[i].memsz + 2*PAGE_SIZE, + kimage_ptr->segment[i].mem - PAGE_SIZE, + PAGE_SIZE); + } else { + /* + * Do not mark all memory as free. Free only named sections + * leaving the rest of memory unchanged. + */ + struct cvmx_bootmem_named_block_desc *ptr = + (struct cvmx_bootmem_named_block_desc *) + named_block_array_ptr; + + for (i = 0; i < bootmem_desc->named_block_num_blocks; i++) + if (ptr[i].size) + cvmx_bootmem_free_named(ptr[i].name); + } + kexec_args[2] = 1UL; /* running on octeon_main_processor */ + kexec_args[3] = (unsigned long)octeon_boot_desc_ptr; +#ifdef CONFIG_SMP + secondary_kexec_args[2] = 0UL; /* running on secondary cpu */ + secondary_kexec_args[3] = (unsigned long)octeon_boot_desc_ptr; +#endif +} + +static void octeon_shutdown(void) +{ + octeon_generic_shutdown(); +#ifdef CONFIG_SMP + smp_call_function(octeon_kexec_smp_down, NULL, 0); + smp_wmb(); + while (num_online_cpus() > 1) { + cpu_relax(); + mdelay(1); + } +#endif +} + +static void octeon_crash_shutdown(struct pt_regs *regs) +{ + octeon_generic_shutdown(); + default_machine_crash_shutdown(regs); +} + +#ifdef CONFIG_SMP +void octeon_crash_smp_send_stop(void) +{ + int cpu; + + /* disable watchdogs */ + for_each_online_cpu(cpu) + cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0); +} +#endif + +#endif /* CONFIG_KEXEC */ + +#ifdef CONFIG_CAVIUM_RESERVE32 +uint64_t octeon_reserve32_memory; +EXPORT_SYMBOL(octeon_reserve32_memory); +#endif + +#ifdef CONFIG_KEXEC +/* crashkernel cmdline parameter is parsed _after_ memory setup + * we also parse it here (workaround for EHB5200) */ +static uint64_t crashk_size, crashk_base; +#endif + +static int octeon_uart; + +extern asmlinkage void handle_int(void); + +/** + * Return non zero if we are currently running in the Octeon simulator + * + * Returns + */ +int octeon_is_simulation(void) +{ + return octeon_bootinfo->board_type == CVMX_BOARD_TYPE_SIM; +} +EXPORT_SYMBOL(octeon_is_simulation); + +/** + * Return true if Octeon is in PCI Host mode. This means + * Linux can control the PCI bus. + * + * Returns Non zero if Octeon in host mode. + */ +int octeon_is_pci_host(void) +{ +#ifdef CONFIG_PCI + return octeon_bootinfo->config_flags & CVMX_BOOTINFO_CFG_FLAG_PCI_HOST; +#else + return 0; +#endif +} + +/** + * Get the clock rate of Octeon + * + * Returns Clock rate in HZ + */ +uint64_t octeon_get_clock_rate(void) +{ + struct cvmx_sysinfo *sysinfo = cvmx_sysinfo_get(); + + return sysinfo->cpu_clock_hz; +} +EXPORT_SYMBOL(octeon_get_clock_rate); + +static u64 octeon_io_clock_rate; + +u64 octeon_get_io_clock_rate(void) +{ + return octeon_io_clock_rate; +} +EXPORT_SYMBOL(octeon_get_io_clock_rate); + + +/** + * Write to the LCD display connected to the bootbus. This display + * exists on most Cavium evaluation boards. If it doesn't exist, then + * this function doesn't do anything. + * + * @s: String to write + */ +void octeon_write_lcd(const char *s) +{ + if (octeon_bootinfo->led_display_base_addr) { + void __iomem *lcd_address = + ioremap_nocache(octeon_bootinfo->led_display_base_addr, + 8); + int i; + for (i = 0; i < 8; i++, s++) { + if (*s) + iowrite8(*s, lcd_address + i); + else + iowrite8(' ', lcd_address + i); + } + iounmap(lcd_address); + } +} + +/** + * Return the console uart passed by the bootloader + * + * Returns uart (0 or 1) + */ +int octeon_get_boot_uart(void) +{ + return (octeon_boot_desc_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1) ? + 1 : 0; +} + +/** + * Get the coremask Linux was booted on. + * + * Returns Core mask + */ +int octeon_get_boot_coremask(void) +{ + return octeon_boot_desc_ptr->core_mask; +} + +/** + * Check the hardware BIST results for a CPU + */ +void octeon_check_cpu_bist(void) +{ + const int coreid = cvmx_get_core_num(); + unsigned long long mask; + unsigned long long bist_val; + + /* Check BIST results for COP0 registers */ + mask = 0x1f00000000ull; + bist_val = read_octeon_c0_icacheerr(); + if (bist_val & mask) + pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n", + coreid, bist_val); + + bist_val = read_octeon_c0_dcacheerr(); + if (bist_val & 1) + pr_err("Core%d L1 Dcache parity error: " + "CacheErr(dcache) = 0x%llx\n", + coreid, bist_val); + + mask = 0xfc00000000000000ull; + bist_val = read_c0_cvmmemctl(); + if (bist_val & mask) + pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n", + coreid, bist_val); + + write_octeon_c0_dcacheerr(0); +} + +/** + * Reboot Octeon + * + * @command: Command to pass to the bootloader. Currently ignored. + */ +static void octeon_restart(char *command) +{ + /* Disable all watchdogs before soft reset. They don't get cleared */ +#ifdef CONFIG_SMP + int cpu; + for_each_online_cpu(cpu) + cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0); +#else + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); +#endif + + mb(); + while (1) + if (OCTEON_IS_OCTEON3()) + cvmx_write_csr(CVMX_RST_SOFT_RST, 1); + else + cvmx_write_csr(CVMX_CIU_SOFT_RST, 1); +} + + +/** + * Permanently stop a core. + * + * @arg: Ignored. + */ +static void octeon_kill_core(void *arg) +{ + if (octeon_is_simulation()) + /* A break instruction causes the simulator stop a core */ + asm volatile ("break" ::: "memory"); + + local_irq_disable(); + /* Disable watchdog on this core. */ + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); + /* Spin in a low power mode. */ + while (true) + asm volatile ("wait" ::: "memory"); +} + + +/** + * Halt the system + */ +static void octeon_halt(void) +{ + smp_call_function(octeon_kill_core, NULL, 0); + + switch (octeon_bootinfo->board_type) { + case CVMX_BOARD_TYPE_NAO38: + /* Driving a 1 to GPIO 12 shuts off this board */ + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(12), 1); + cvmx_write_csr(CVMX_GPIO_TX_SET, 0x1000); + break; + default: + octeon_write_lcd("PowerOff"); + break; + } + + octeon_kill_core(NULL); +} + +static char __read_mostly octeon_system_type[80]; + +static void __init init_octeon_system_type(void) +{ + char const *board_type; + + board_type = cvmx_board_type_to_string(octeon_bootinfo->board_type); + if (board_type == NULL) { + struct device_node *root; + int ret; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &board_type); + of_node_put(root); + if (ret) + board_type = "Unsupported Board"; + } + + snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)", + board_type, octeon_model_get_string(read_c0_prid())); +} + +/** + * Return a string representing the system type + * + * Returns + */ +const char *octeon_board_type_string(void) +{ + return octeon_system_type; +} + +const char *get_system_type(void) + __attribute__ ((alias("octeon_board_type_string"))); + +void octeon_user_io_init(void) +{ + union octeon_cvmemctl cvmmemctl; + + /* Get the current settings for CP0_CVMMEMCTL_REG */ + cvmmemctl.u64 = read_c0_cvmmemctl(); + /* R/W If set, marked write-buffer entries time out the same + * as as other entries; if clear, marked write-buffer entries + * use the maximum timeout. */ + cvmmemctl.s.dismarkwblongto = 1; + /* R/W If set, a merged store does not clear the write-buffer + * entry timeout state. */ + cvmmemctl.s.dismrgclrwbto = 0; + /* R/W Two bits that are the MSBs of the resultant CVMSEG LM + * word location for an IOBDMA. The other 8 bits come from the + * SCRADDR field of the IOBDMA. */ + cvmmemctl.s.iobdmascrmsb = 0; + /* R/W If set, SYNCWS and SYNCS only order marked stores; if + * clear, SYNCWS and SYNCS only order unmarked + * stores. SYNCWSMARKED has no effect when DISSYNCWS is + * set. */ + cvmmemctl.s.syncwsmarked = 0; + /* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as SYNC. */ + cvmmemctl.s.dissyncws = 0; + /* R/W If set, no stall happens on write buffer full. */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2)) + cvmmemctl.s.diswbfst = 1; + else + cvmmemctl.s.diswbfst = 0; + /* R/W If set (and SX set), supervisor-level loads/stores can + * use XKPHYS addresses with <48>==0 */ + cvmmemctl.s.xkmemenas = 0; + + /* R/W If set (and UX set), user-level loads/stores can use + * XKPHYS addresses with VA<48>==0 */ + cvmmemctl.s.xkmemenau = 0; + + /* R/W If set (and SX set), supervisor-level loads/stores can + * use XKPHYS addresses with VA<48>==1 */ + cvmmemctl.s.xkioenas = 0; + + /* R/W If set (and UX set), user-level loads/stores can use + * XKPHYS addresses with VA<48>==1 */ + cvmmemctl.s.xkioenau = 0; + + /* R/W If set, all stores act as SYNCW (NOMERGE must be set + * when this is set) RW, reset to 0. */ + cvmmemctl.s.allsyncw = 0; + + /* R/W If set, no stores merge, and all stores reach the + * coherent bus in order. */ + cvmmemctl.s.nomerge = 0; + /* R/W Selects the bit in the counter used for DID time-outs 0 + * = 231, 1 = 230, 2 = 229, 3 = 214. Actual time-out is + * between 1x and 2x this interval. For example, with + * DIDTTO=3, expiration interval is between 16K and 32K. */ + cvmmemctl.s.didtto = 0; + /* R/W If set, the (mem) CSR clock never turns off. */ + cvmmemctl.s.csrckalwys = 0; + /* R/W If set, mclk never turns off. */ + cvmmemctl.s.mclkalwys = 0; + /* R/W Selects the bit in the counter used for write buffer + * flush time-outs (WBFLT+11) is the bit position in an + * internal counter used to determine expiration. The write + * buffer expires between 1x and 2x this interval. For + * example, with WBFLT = 0, a write buffer expires between 2K + * and 4K cycles after the write buffer entry is allocated. */ + cvmmemctl.s.wbfltime = 0; + /* R/W If set, do not put Istream in the L2 cache. */ + cvmmemctl.s.istrnol2 = 0; + + /* + * R/W The write buffer threshold. As per erratum Core-14752 + * for CN63XX, a sc/scd might fail if the write buffer is + * full. Lowering WBTHRESH greatly lowers the chances of the + * write buffer ever being full and triggering the erratum. + */ + if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X)) + cvmmemctl.s.wbthresh = 4; + else + cvmmemctl.s.wbthresh = 10; + + /* R/W If set, CVMSEG is available for loads/stores in + * kernel/debug mode. */ +#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0 + cvmmemctl.s.cvmsegenak = 1; +#else + cvmmemctl.s.cvmsegenak = 0; +#endif + /* R/W If set, CVMSEG is available for loads/stores in + * supervisor mode. */ + cvmmemctl.s.cvmsegenas = 0; + /* R/W If set, CVMSEG is available for loads/stores in user + * mode. */ + cvmmemctl.s.cvmsegenau = 0; + + write_c0_cvmmemctl(cvmmemctl.u64); + + /* Setup of CVMSEG is done in kernel-entry-init.h */ + if (smp_processor_id() == 0) + pr_notice("CVMSEG size: %d cache lines (%d bytes)\n", + CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE, + CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128); + + if (octeon_has_feature(OCTEON_FEATURE_FAU)) { + union cvmx_iob_fau_timeout fau_timeout; + + /* Set a default for the hardware timeouts */ + fau_timeout.u64 = 0; + fau_timeout.s.tout_val = 0xfff; + /* Disable tagwait FAU timeout */ + fau_timeout.s.tout_enb = 0; + cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_timeout.u64); + } + + if ((!OCTEON_IS_MODEL(OCTEON_CN68XX) && + !OCTEON_IS_MODEL(OCTEON_CN7XXX)) || + OCTEON_IS_MODEL(OCTEON_CN70XX)) { + union cvmx_pow_nw_tim nm_tim; + + nm_tim.u64 = 0; + /* 4096 cycles */ + nm_tim.s.nw_tim = 3; + cvmx_write_csr(CVMX_POW_NW_TIM, nm_tim.u64); + } + + write_octeon_c0_icacheerr(0); + write_c0_derraddr1(0); +} + +/** + * Early entry point for arch setup + */ +void __init prom_init(void) +{ + struct cvmx_sysinfo *sysinfo; + const char *arg; + char *p; + int i; + u64 t; + int argc; +#ifdef CONFIG_CAVIUM_RESERVE32 + int64_t addr = -1; +#endif + /* + * The bootloader passes a pointer to the boot descriptor in + * $a3, this is available as fw_arg3. + */ + octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3; + octeon_bootinfo = + cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr); + cvmx_bootmem_init(cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr)); + + sysinfo = cvmx_sysinfo_get(); + memset(sysinfo, 0, sizeof(*sysinfo)); + sysinfo->system_dram_size = octeon_bootinfo->dram_size << 20; + sysinfo->phy_mem_desc_addr = (u64)phys_to_virt(octeon_bootinfo->phy_mem_desc_addr); + + if ((octeon_bootinfo->major_version > 1) || + (octeon_bootinfo->major_version == 1 && + octeon_bootinfo->minor_version >= 4)) + cvmx_coremask_copy(&sysinfo->core_mask, + &octeon_bootinfo->ext_core_mask); + else + cvmx_coremask_set64(&sysinfo->core_mask, + octeon_bootinfo->core_mask); + + /* Some broken u-boot pass garbage in upper bits, clear them out */ + if (!OCTEON_IS_MODEL(OCTEON_CN78XX)) + for (i = 512; i < 1024; i++) + cvmx_coremask_clear_core(&sysinfo->core_mask, i); + + sysinfo->exception_base_addr = octeon_bootinfo->exception_base_addr; + sysinfo->cpu_clock_hz = octeon_bootinfo->eclock_hz; + sysinfo->dram_data_rate_hz = octeon_bootinfo->dclock_hz * 2; + sysinfo->board_type = octeon_bootinfo->board_type; + sysinfo->board_rev_major = octeon_bootinfo->board_rev_major; + sysinfo->board_rev_minor = octeon_bootinfo->board_rev_minor; + memcpy(sysinfo->mac_addr_base, octeon_bootinfo->mac_addr_base, + sizeof(sysinfo->mac_addr_base)); + sysinfo->mac_addr_count = octeon_bootinfo->mac_addr_count; + memcpy(sysinfo->board_serial_number, + octeon_bootinfo->board_serial_number, + sizeof(sysinfo->board_serial_number)); + sysinfo->compact_flash_common_base_addr = + octeon_bootinfo->compact_flash_common_base_addr; + sysinfo->compact_flash_attribute_base_addr = + octeon_bootinfo->compact_flash_attribute_base_addr; + sysinfo->led_display_base_addr = octeon_bootinfo->led_display_base_addr; + sysinfo->dfa_ref_clock_hz = octeon_bootinfo->dfa_ref_clock_hz; + sysinfo->bootloader_config_flags = octeon_bootinfo->config_flags; + + if (OCTEON_IS_OCTEON2()) { + /* I/O clock runs at a different rate than the CPU. */ + union cvmx_mio_rst_boot rst_boot; + rst_boot.u64 = cvmx_read_csr(CVMX_MIO_RST_BOOT); + octeon_io_clock_rate = 50000000 * rst_boot.s.pnr_mul; + } else if (OCTEON_IS_OCTEON3()) { + /* I/O clock runs at a different rate than the CPU. */ + union cvmx_rst_boot rst_boot; + rst_boot.u64 = cvmx_read_csr(CVMX_RST_BOOT); + octeon_io_clock_rate = 50000000 * rst_boot.s.pnr_mul; + } else { + octeon_io_clock_rate = sysinfo->cpu_clock_hz; + } + + t = read_c0_cvmctl(); + if ((t & (1ull << 27)) == 0) { + /* + * Setup the multiplier save/restore code if + * CvmCtl[NOMUL] clear. + */ + void *save; + void *save_end; + void *restore; + void *restore_end; + int save_len; + int restore_len; + int save_max = (char *)octeon_mult_save_end - + (char *)octeon_mult_save; + int restore_max = (char *)octeon_mult_restore_end - + (char *)octeon_mult_restore; + if (current_cpu_data.cputype == CPU_CAVIUM_OCTEON3) { + save = octeon_mult_save3; + save_end = octeon_mult_save3_end; + restore = octeon_mult_restore3; + restore_end = octeon_mult_restore3_end; + } else { + save = octeon_mult_save2; + save_end = octeon_mult_save2_end; + restore = octeon_mult_restore2; + restore_end = octeon_mult_restore2_end; + } + save_len = (char *)save_end - (char *)save; + restore_len = (char *)restore_end - (char *)restore; + if (!WARN_ON(save_len > save_max || + restore_len > restore_max)) { + memcpy(octeon_mult_save, save, save_len); + memcpy(octeon_mult_restore, restore, restore_len); + } + } + + /* + * Only enable the LED controller if we're running on a CN38XX, CN58XX, + * or CN56XX. The CN30XX and CN31XX don't have an LED controller. + */ + if (!octeon_is_simulation() && + octeon_has_feature(OCTEON_FEATURE_LED_CONTROLLER)) { + cvmx_write_csr(CVMX_LED_EN, 0); + cvmx_write_csr(CVMX_LED_PRT, 0); + cvmx_write_csr(CVMX_LED_DBG, 0); + cvmx_write_csr(CVMX_LED_PRT_FMT, 0); + cvmx_write_csr(CVMX_LED_UDD_CNTX(0), 32); + cvmx_write_csr(CVMX_LED_UDD_CNTX(1), 32); + cvmx_write_csr(CVMX_LED_UDD_DATX(0), 0); + cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0); + cvmx_write_csr(CVMX_LED_EN, 1); + } +#ifdef CONFIG_CAVIUM_RESERVE32 + /* + * We need to temporarily allocate all memory in the reserve32 + * region. This makes sure the kernel doesn't allocate this + * memory when it is getting memory from the + * bootloader. Later, after the memory allocations are + * complete, the reserve32 will be freed. + * + * Allocate memory for RESERVED32 aligned on 2MB boundary. This + * is in case we later use hugetlb entries with it. + */ + addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20, + 0, 0, 2 << 20, + "CAVIUM_RESERVE32", 0); + if (addr < 0) + pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n"); + else + octeon_reserve32_memory = addr; +#endif + +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2 + if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) { + pr_info("Skipping L2 locking due to reduced L2 cache size\n"); + } else { + uint32_t __maybe_unused ebase = read_c0_ebase() & 0x3ffff000; +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB + /* TLB refill */ + cvmx_l2c_lock_mem_region(ebase, 0x100); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION + /* General exception */ + cvmx_l2c_lock_mem_region(ebase + 0x180, 0x80); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT + /* Interrupt handler */ + cvmx_l2c_lock_mem_region(ebase + 0x200, 0x80); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT + cvmx_l2c_lock_mem_region(__pa_symbol(handle_int), 0x100); + cvmx_l2c_lock_mem_region(__pa_symbol(plat_irq_dispatch), 0x80); +#endif +#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY + cvmx_l2c_lock_mem_region(__pa_symbol(memcpy), 0x480); +#endif + } +#endif + + octeon_check_cpu_bist(); + + octeon_uart = octeon_get_boot_uart(); + +#ifdef CONFIG_SMP + octeon_write_lcd("LinuxSMP"); +#else + octeon_write_lcd("Linux"); +#endif + + octeon_setup_delays(); + + /* + * BIST should always be enabled when doing a soft reset. L2 + * Cache locking for instance is not cleared unless BIST is + * enabled. Unfortunately due to a chip errata G-200 for + * Cn38XX and CN31XX, BIST msut be disabled on these parts. + */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || + OCTEON_IS_MODEL(OCTEON_CN31XX)) + cvmx_write_csr(CVMX_CIU_SOFT_BIST, 0); + else + cvmx_write_csr(CVMX_CIU_SOFT_BIST, 1); + + /* Default to 64MB in the simulator to speed things up */ + if (octeon_is_simulation()) + max_memory = 64ull << 20; + + arg = strstr(arcs_cmdline, "mem="); + if (arg) { + max_memory = memparse(arg + 4, &p); + if (max_memory == 0) + max_memory = 32ull << 30; + if (*p == '@') + reserve_low_mem = memparse(p + 1, &p); + } + + arcs_cmdline[0] = 0; + argc = octeon_boot_desc_ptr->argc; + for (i = 0; i < argc; i++) { + const char *arg = + cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]); + if ((strncmp(arg, "MEM=", 4) == 0) || + (strncmp(arg, "mem=", 4) == 0)) { + max_memory = memparse(arg + 4, &p); + if (max_memory == 0) + max_memory = 32ull << 30; + if (*p == '@') + reserve_low_mem = memparse(p + 1, &p); +#ifdef CONFIG_KEXEC + } else if (strncmp(arg, "crashkernel=", 12) == 0) { + crashk_size = memparse(arg+12, &p); + if (*p == '@') + crashk_base = memparse(p+1, &p); + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, arg); + /* + * To do: switch parsing to new style, something like: + * parse_crashkernel(arg, sysinfo->system_dram_size, + * &crashk_size, &crashk_base); + */ +#endif + } else if (strlen(arcs_cmdline) + strlen(arg) + 1 < + sizeof(arcs_cmdline) - 1) { + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, arg); + } + } + + if (strstr(arcs_cmdline, "console=") == NULL) { + if (octeon_uart == 1) + strcat(arcs_cmdline, " console=ttyS1,115200"); + else + strcat(arcs_cmdline, " console=ttyS0,115200"); + } + + mips_hpt_frequency = octeon_get_clock_rate(); + + octeon_init_cvmcount(); + + _machine_restart = octeon_restart; + _machine_halt = octeon_halt; + +#ifdef CONFIG_KEXEC + _machine_kexec_shutdown = octeon_shutdown; + _machine_crash_shutdown = octeon_crash_shutdown; + _machine_kexec_prepare = octeon_kexec_prepare; +#ifdef CONFIG_SMP + _crash_smp_send_stop = octeon_crash_smp_send_stop; +#endif +#endif + + octeon_user_io_init(); + octeon_setup_smp(); +} + +/* Exclude a single page from the regions obtained in plat_mem_setup. */ +#ifndef CONFIG_CRASH_DUMP +static __init void memory_exclude_page(u64 addr, u64 *mem, u64 *size) +{ + if (addr > *mem && addr < *mem + *size) { + u64 inc = addr - *mem; + add_memory_region(*mem, inc, BOOT_MEM_RAM); + *mem += inc; + *size -= inc; + } + + if (addr == *mem && *size > PAGE_SIZE) { + *mem += PAGE_SIZE; + *size -= PAGE_SIZE; + } +} +#endif /* CONFIG_CRASH_DUMP */ + +void __init fw_init_cmdline(void) +{ + int i; + + octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3; + for (i = 0; i < octeon_boot_desc_ptr->argc; i++) { + const char *arg = + cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]); + if (strlen(arcs_cmdline) + strlen(arg) + 1 < + sizeof(arcs_cmdline) - 1) { + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, arg); + } + } +} + +void __init *plat_get_fdt(void) +{ + octeon_bootinfo = + cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr); + return phys_to_virt(octeon_bootinfo->fdt_addr); +} + +void __init plat_mem_setup(void) +{ + uint64_t mem_alloc_size; + uint64_t total; + uint64_t crashk_end; +#ifndef CONFIG_CRASH_DUMP + int64_t memory; + uint64_t kernel_start; + uint64_t kernel_size; +#endif + + total = 0; + crashk_end = 0; + + /* + * The Mips memory init uses the first memory location for + * some memory vectors. When SPARSEMEM is in use, it doesn't + * verify that the size is big enough for the final + * vectors. Making the smallest chuck 4MB seems to be enough + * to consistently work. + */ + mem_alloc_size = 4 << 20; + if (mem_alloc_size > max_memory) + mem_alloc_size = max_memory; + +/* Crashkernel ignores bootmem list. It relies on mem=X@Y option */ +#ifdef CONFIG_CRASH_DUMP + add_memory_region(reserve_low_mem, max_memory, BOOT_MEM_RAM); + total += max_memory; +#else +#ifdef CONFIG_KEXEC + if (crashk_size > 0) { + add_memory_region(crashk_base, crashk_size, BOOT_MEM_RAM); + crashk_end = crashk_base + crashk_size; + } +#endif + /* + * When allocating memory, we want incrementing addresses from + * bootmem_alloc so the code in add_memory_region can merge + * regions next to each other. + */ + cvmx_bootmem_lock(); + while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX) + && (total < max_memory)) { + memory = cvmx_bootmem_phy_alloc(mem_alloc_size, + __pa_symbol(&_end), -1, + 0x100000, + CVMX_BOOTMEM_FLAG_NO_LOCKING); + if (memory >= 0) { + u64 size = mem_alloc_size; +#ifdef CONFIG_KEXEC + uint64_t end; +#endif + + /* + * exclude a page at the beginning and end of + * the 256MB PCIe 'hole' so the kernel will not + * try to allocate multi-page buffers that + * span the discontinuity. + */ + memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE, + &memory, &size); + memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE + + CVMX_PCIE_BAR1_PHYS_SIZE, + &memory, &size); +#ifdef CONFIG_KEXEC + end = memory + mem_alloc_size; + + /* + * This function automatically merges address regions + * next to each other if they are received in + * incrementing order + */ + if (memory < crashk_base && end > crashk_end) { + /* region is fully in */ + add_memory_region(memory, + crashk_base - memory, + BOOT_MEM_RAM); + total += crashk_base - memory; + add_memory_region(crashk_end, + end - crashk_end, + BOOT_MEM_RAM); + total += end - crashk_end; + continue; + } + + if (memory >= crashk_base && end <= crashk_end) + /* + * Entire memory region is within the new + * kernel's memory, ignore it. + */ + continue; + + if (memory > crashk_base && memory < crashk_end && + end > crashk_end) { + /* + * Overlap with the beginning of the region, + * reserve the beginning. + */ + mem_alloc_size -= crashk_end - memory; + memory = crashk_end; + } else if (memory < crashk_base && end > crashk_base && + end < crashk_end) + /* + * Overlap with the beginning of the region, + * chop of end. + */ + mem_alloc_size -= end - crashk_base; +#endif + add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM); + total += mem_alloc_size; + /* Recovering mem_alloc_size */ + mem_alloc_size = 4 << 20; + } else { + break; + } + } + cvmx_bootmem_unlock(); + /* Add the memory region for the kernel. */ + kernel_start = (unsigned long) _text; + kernel_size = _end - _text; + + /* Adjust for physical offset. */ + kernel_start &= ~0xffffffff80000000ULL; + add_memory_region(kernel_start, kernel_size, BOOT_MEM_RAM); +#endif /* CONFIG_CRASH_DUMP */ + +#ifdef CONFIG_CAVIUM_RESERVE32 + /* + * Now that we've allocated the kernel memory it is safe to + * free the reserved region. We free it here so that builtin + * drivers can use the memory. + */ + if (octeon_reserve32_memory) + cvmx_bootmem_free_named("CAVIUM_RESERVE32"); +#endif /* CONFIG_CAVIUM_RESERVE32 */ + + if (total == 0) + panic("Unable to allocate memory from " + "cvmx_bootmem_phy_alloc"); +} + +/* + * Emit one character to the boot UART. Exported for use by the + * watchdog timer. + */ +void prom_putchar(char c) +{ + uint64_t lsrval; + + /* Spin until there is room */ + do { + lsrval = cvmx_read_csr(CVMX_MIO_UARTX_LSR(octeon_uart)); + } while ((lsrval & 0x20) == 0); + + /* Write the byte */ + cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c & 0xffull); +} +EXPORT_SYMBOL(prom_putchar); + +void __init prom_free_prom_memory(void) +{ + if (CAVIUM_OCTEON_DCACHE_PREFETCH_WAR) { + /* Check for presence of Core-14449 fix. */ + u32 insn; + u32 *foo; + + foo = &insn; + + asm volatile("# before" : : : "memory"); + prefetch(foo); + asm volatile( + ".set push\n\t" + ".set noreorder\n\t" + "bal 1f\n\t" + "nop\n" + "1:\tlw %0,-12($31)\n\t" + ".set pop\n\t" + : "=r" (insn) : : "$31", "memory"); + + if ((insn >> 26) != 0x33) + panic("No PREF instruction at Core-14449 probe point."); + + if (((insn >> 16) & 0x1f) != 28) + panic("OCTEON II DCache prefetch workaround not in place (%04x).\n" + "Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1).", + insn); + } +} + +void __init octeon_fill_mac_addresses(void); + +void __init device_tree_init(void) +{ + const void *fdt; + bool do_prune; + bool fill_mac; + +#ifdef CONFIG_MIPS_ELF_APPENDED_DTB + if (!fdt_check_header(&__appended_dtb)) { + fdt = &__appended_dtb; + do_prune = false; + fill_mac = true; + pr_info("Using appended Device Tree.\n"); + } else +#endif + if (octeon_bootinfo->minor_version >= 3 && octeon_bootinfo->fdt_addr) { + fdt = phys_to_virt(octeon_bootinfo->fdt_addr); + if (fdt_check_header(fdt)) + panic("Corrupt Device Tree passed to kernel."); + do_prune = false; + fill_mac = false; + pr_info("Using passed Device Tree.\n"); + } else if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { + fdt = &__dtb_octeon_68xx_begin; + do_prune = true; + fill_mac = true; + } else { + fdt = &__dtb_octeon_3xxx_begin; + do_prune = true; + fill_mac = true; + } + + initial_boot_params = (void *)fdt; + + if (do_prune) { + octeon_prune_device_tree(); + pr_info("Using internal Device Tree.\n"); + } + if (fill_mac) + octeon_fill_mac_addresses(); + unflatten_and_copy_device_tree(); + init_octeon_system_type(); +} + +static int __initdata disable_octeon_edac_p; + +static int __init disable_octeon_edac(char *str) +{ + disable_octeon_edac_p = 1; + return 0; +} +early_param("disable_octeon_edac", disable_octeon_edac); + +static char *edac_device_names[] = { + "octeon_l2c_edac", + "octeon_pc_edac", +}; + +static int __init edac_devinit(void) +{ + struct platform_device *dev; + int i, err = 0; + int num_lmc; + char *name; + + if (disable_octeon_edac_p) + return 0; + + for (i = 0; i < ARRAY_SIZE(edac_device_names); i++) { + name = edac_device_names[i]; + dev = platform_device_register_simple(name, -1, NULL, 0); + if (IS_ERR(dev)) { + pr_err("Registration of %s failed!\n", name); + err = PTR_ERR(dev); + } + } + + num_lmc = OCTEON_IS_MODEL(OCTEON_CN68XX) ? 4 : + (OCTEON_IS_MODEL(OCTEON_CN56XX) ? 2 : 1); + for (i = 0; i < num_lmc; i++) { + dev = platform_device_register_simple("octeon_lmc_edac", + i, NULL, 0); + if (IS_ERR(dev)) { + pr_err("Registration of octeon_lmc_edac %d failed!\n", i); + err = PTR_ERR(dev); + } + } + + return err; +} +device_initcall(edac_devinit); + +static void __initdata *octeon_dummy_iospace; + +static int __init octeon_no_pci_init(void) +{ + /* + * Initially assume there is no PCI. The PCI/PCIe platform code will + * later re-initialize these to correct values if they are present. + */ + octeon_dummy_iospace = vzalloc(IO_SPACE_LIMIT); + set_io_port_base((unsigned long)octeon_dummy_iospace); + ioport_resource.start = MAX_RESOURCE; + ioport_resource.end = 0; + return 0; +} +core_initcall(octeon_no_pci_init); + +static int __init octeon_no_pci_release(void) +{ + /* + * Release the allocated memory if a real IO space is there. + */ + if ((unsigned long)octeon_dummy_iospace != mips_io_port_base) + vfree(octeon_dummy_iospace); + return 0; +} +late_initcall(octeon_no_pci_release); diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c new file mode 100644 index 000000000..75e7c8625 --- /dev/null +++ b/arch/mips/cavium-octeon/smp.c @@ -0,0 +1,516 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2008, 2009, 2010 Cavium Networks + */ +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/sched.h> +#include <linux/sched/hotplug.h> +#include <linux/sched/task_stack.h> +#include <linux/init.h> +#include <linux/export.h> + +#include <asm/mmu_context.h> +#include <asm/time.h> +#include <asm/setup.h> + +#include <asm/octeon/octeon.h> + +#include "octeon_boot.h" + +volatile unsigned long octeon_processor_boot = 0xff; +volatile unsigned long octeon_processor_sp; +volatile unsigned long octeon_processor_gp; +#ifdef CONFIG_RELOCATABLE +volatile unsigned long octeon_processor_relocated_kernel_entry; +#endif /* CONFIG_RELOCATABLE */ + +#ifdef CONFIG_HOTPLUG_CPU +uint64_t octeon_bootloader_entry_addr; +EXPORT_SYMBOL(octeon_bootloader_entry_addr); +#endif + +extern void kernel_entry(unsigned long arg1, ...); + +static void octeon_icache_flush(void) +{ + asm volatile ("synci 0($0)\n"); +} + +static void (*octeon_message_functions[8])(void) = { + scheduler_ipi, + generic_smp_call_function_interrupt, + octeon_icache_flush, +}; + +static irqreturn_t mailbox_interrupt(int irq, void *dev_id) +{ + u64 mbox_clrx = CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()); + u64 action; + int i; + + /* + * Make sure the function array initialization remains + * correct. + */ + BUILD_BUG_ON(SMP_RESCHEDULE_YOURSELF != (1 << 0)); + BUILD_BUG_ON(SMP_CALL_FUNCTION != (1 << 1)); + BUILD_BUG_ON(SMP_ICACHE_FLUSH != (1 << 2)); + + /* + * Load the mailbox register to figure out what we're supposed + * to do. + */ + action = cvmx_read_csr(mbox_clrx); + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + action &= 0xff; + else + action &= 0xffff; + + /* Clear the mailbox to clear the interrupt */ + cvmx_write_csr(mbox_clrx, action); + + for (i = 0; i < ARRAY_SIZE(octeon_message_functions) && action;) { + if (action & 1) { + void (*fn)(void) = octeon_message_functions[i]; + + if (fn) + fn(); + } + action >>= 1; + i++; + } + return IRQ_HANDLED; +} + +/** + * Cause the function described by call_data to be executed on the passed + * cpu. When the function has finished, increment the finished field of + * call_data. + */ +void octeon_send_ipi_single(int cpu, unsigned int action) +{ + int coreid = cpu_logical_map(cpu); + /* + pr_info("SMP: Mailbox send cpu=%d, coreid=%d, action=%u\n", cpu, + coreid, action); + */ + cvmx_write_csr(CVMX_CIU_MBOX_SETX(coreid), action); +} + +static inline void octeon_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + octeon_send_ipi_single(i, action); +} + +/** + * Detect available CPUs, populate cpu_possible_mask + */ +static void octeon_smp_hotplug_setup(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + struct linux_app_boot_info *labi; + + if (!setup_max_cpus) + return; + + labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER); + if (labi->labi_signature != LABI_SIGNATURE) { + pr_info("The bootloader on this board does not support HOTPLUG_CPU."); + return; + } + + octeon_bootloader_entry_addr = labi->InitTLBStart_addr; +#endif +} + +static void __init octeon_smp_setup(void) +{ + const int coreid = cvmx_get_core_num(); + int cpus; + int id; + struct cvmx_sysinfo *sysinfo = cvmx_sysinfo_get(); + +#ifdef CONFIG_HOTPLUG_CPU + int core_mask = octeon_get_boot_coremask(); + unsigned int num_cores = cvmx_octeon_num_cores(); +#endif + + /* The present CPUs are initially just the boot cpu (CPU 0). */ + for (id = 0; id < NR_CPUS; id++) { + set_cpu_possible(id, id == 0); + set_cpu_present(id, id == 0); + } + + __cpu_number_map[coreid] = 0; + __cpu_logical_map[0] = coreid; + + /* The present CPUs get the lowest CPU numbers. */ + cpus = 1; + for (id = 0; id < NR_CPUS; id++) { + if ((id != coreid) && cvmx_coremask_is_core_set(&sysinfo->core_mask, id)) { + set_cpu_possible(cpus, true); + set_cpu_present(cpus, true); + __cpu_number_map[id] = cpus; + __cpu_logical_map[cpus] = id; + cpus++; + } + } + +#ifdef CONFIG_HOTPLUG_CPU + /* + * The possible CPUs are all those present on the chip. We + * will assign CPU numbers for possible cores as well. Cores + * are always consecutively numberd from 0. + */ + for (id = 0; setup_max_cpus && octeon_bootloader_entry_addr && + id < num_cores && id < NR_CPUS; id++) { + if (!(core_mask & (1 << id))) { + set_cpu_possible(cpus, true); + __cpu_number_map[id] = cpus; + __cpu_logical_map[cpus] = id; + cpus++; + } + } +#endif + + octeon_smp_hotplug_setup(); +} + + +#ifdef CONFIG_RELOCATABLE +int plat_post_relocation(long offset) +{ + unsigned long entry = (unsigned long)kernel_entry; + + /* Send secondaries into relocated kernel */ + octeon_processor_relocated_kernel_entry = entry + offset; + + return 0; +} +#endif /* CONFIG_RELOCATABLE */ + +/** + * Firmware CPU startup hook + * + */ +static int octeon_boot_secondary(int cpu, struct task_struct *idle) +{ + int count; + + pr_info("SMP: Booting CPU%02d (CoreId %2d)...\n", cpu, + cpu_logical_map(cpu)); + + octeon_processor_sp = __KSTK_TOS(idle); + octeon_processor_gp = (unsigned long)(task_thread_info(idle)); + octeon_processor_boot = cpu_logical_map(cpu); + mb(); + + count = 10000; + while (octeon_processor_sp && count) { + /* Waiting for processor to get the SP and GP */ + udelay(1); + count--; + } + if (count == 0) { + pr_err("Secondary boot timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +/** + * After we've done initial boot, this function is called to allow the + * board code to clean up state, if needed + */ +static void octeon_init_secondary(void) +{ + unsigned int sr; + + sr = set_c0_status(ST0_BEV); + write_c0_ebase((u32)ebase); + write_c0_status(sr); + + octeon_check_cpu_bist(); + octeon_init_cvmcount(); + + octeon_irq_setup_secondary(); +} + +/** + * Callout to firmware before smp_init + * + */ +static void __init octeon_prepare_cpus(unsigned int max_cpus) +{ + /* + * Only the low order mailbox bits are used for IPIs, leave + * the other bits alone. + */ + cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff); + if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, + IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI", + mailbox_interrupt)) { + panic("Cannot request_irq(OCTEON_IRQ_MBOX0)"); + } +} + +/** + * Last chance for the board code to finish SMP initialization before + * the CPU is "online". + */ +static void octeon_smp_finish(void) +{ + octeon_user_io_init(); + + /* to generate the first CPU timer interrupt */ + write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + local_irq_enable(); +} + +#ifdef CONFIG_HOTPLUG_CPU + +/* State of each CPU. */ +DEFINE_PER_CPU(int, cpu_state); + +static int octeon_cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + if (!octeon_bootloader_entry_addr) + return -ENOTSUPP; + + set_cpu_online(cpu, false); + calculate_cpu_foreign_map(); + octeon_fixup_irqs(); + + __flush_cache_all(); + local_flush_tlb_all(); + + return 0; +} + +static void octeon_cpu_die(unsigned int cpu) +{ + int coreid = cpu_logical_map(cpu); + uint32_t mask, new_mask; + const struct cvmx_bootmem_named_block_desc *block_desc; + + while (per_cpu(cpu_state, cpu) != CPU_DEAD) + cpu_relax(); + + /* + * This is a bit complicated strategics of getting/settig available + * cores mask, copied from bootloader + */ + + mask = 1 << coreid; + /* LINUX_APP_BOOT_BLOCK is initialized in bootoct binary */ + block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME); + + if (!block_desc) { + struct linux_app_boot_info *labi; + + labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER); + + labi->avail_coremask |= mask; + new_mask = labi->avail_coremask; + } else { /* alternative, already initialized */ + uint32_t *p = (uint32_t *)PHYS_TO_XKSEG_CACHED(block_desc->base_addr + + AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK); + *p |= mask; + new_mask = *p; + } + + pr_info("Reset core %d. Available Coremask = 0x%x \n", coreid, new_mask); + mb(); + cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid); + cvmx_write_csr(CVMX_CIU_PP_RST, 0); +} + +void play_dead(void) +{ + int cpu = cpu_number_map(cvmx_get_core_num()); + + idle_task_exit(); + octeon_processor_boot = 0xff; + per_cpu(cpu_state, cpu) = CPU_DEAD; + + mb(); + + while (1) /* core will be reset here */ + ; +} + +static void start_after_reset(void) +{ + kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */ +} + +static int octeon_update_boot_vector(unsigned int cpu) +{ + + int coreid = cpu_logical_map(cpu); + uint32_t avail_coremask; + const struct cvmx_bootmem_named_block_desc *block_desc; + struct boot_init_vector *boot_vect = + (struct boot_init_vector *)PHYS_TO_XKSEG_CACHED(BOOTLOADER_BOOT_VECTOR); + + block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME); + + if (!block_desc) { + struct linux_app_boot_info *labi; + + labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER); + + avail_coremask = labi->avail_coremask; + labi->avail_coremask &= ~(1 << coreid); + } else { /* alternative, already initialized */ + avail_coremask = *(uint32_t *)PHYS_TO_XKSEG_CACHED( + block_desc->base_addr + AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK); + } + + if (!(avail_coremask & (1 << coreid))) { + /* core not available, assume, that caught by simple-executive */ + cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid); + cvmx_write_csr(CVMX_CIU_PP_RST, 0); + } + + boot_vect[coreid].app_start_func_addr = + (uint32_t) (unsigned long) start_after_reset; + boot_vect[coreid].code_addr = octeon_bootloader_entry_addr; + + mb(); + + cvmx_write_csr(CVMX_CIU_NMI, (1 << coreid) & avail_coremask); + + return 0; +} + +static int register_cavium_notifier(void) +{ + return cpuhp_setup_state_nocalls(CPUHP_MIPS_SOC_PREPARE, + "mips/cavium:prepare", + octeon_update_boot_vector, NULL); +} +late_initcall(register_cavium_notifier); + +#endif /* CONFIG_HOTPLUG_CPU */ + +const struct plat_smp_ops octeon_smp_ops = { + .send_ipi_single = octeon_send_ipi_single, + .send_ipi_mask = octeon_send_ipi_mask, + .init_secondary = octeon_init_secondary, + .smp_finish = octeon_smp_finish, + .boot_secondary = octeon_boot_secondary, + .smp_setup = octeon_smp_setup, + .prepare_cpus = octeon_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = octeon_cpu_disable, + .cpu_die = octeon_cpu_die, +#endif +}; + +static irqreturn_t octeon_78xx_reched_interrupt(int irq, void *dev_id) +{ + scheduler_ipi(); + return IRQ_HANDLED; +} + +static irqreturn_t octeon_78xx_call_function_interrupt(int irq, void *dev_id) +{ + generic_smp_call_function_interrupt(); + return IRQ_HANDLED; +} + +static irqreturn_t octeon_78xx_icache_flush_interrupt(int irq, void *dev_id) +{ + octeon_icache_flush(); + return IRQ_HANDLED; +} + +/* + * Callout to firmware before smp_init + */ +static void octeon_78xx_prepare_cpus(unsigned int max_cpus) +{ + if (request_irq(OCTEON_IRQ_MBOX0 + 0, + octeon_78xx_reched_interrupt, + IRQF_PERCPU | IRQF_NO_THREAD, "Scheduler", + octeon_78xx_reched_interrupt)) { + panic("Cannot request_irq for SchedulerIPI"); + } + if (request_irq(OCTEON_IRQ_MBOX0 + 1, + octeon_78xx_call_function_interrupt, + IRQF_PERCPU | IRQF_NO_THREAD, "SMP-Call", + octeon_78xx_call_function_interrupt)) { + panic("Cannot request_irq for SMP-Call"); + } + if (request_irq(OCTEON_IRQ_MBOX0 + 2, + octeon_78xx_icache_flush_interrupt, + IRQF_PERCPU | IRQF_NO_THREAD, "ICache-Flush", + octeon_78xx_icache_flush_interrupt)) { + panic("Cannot request_irq for ICache-Flush"); + } +} + +static void octeon_78xx_send_ipi_single(int cpu, unsigned int action) +{ + int i; + + for (i = 0; i < 8; i++) { + if (action & 1) + octeon_ciu3_mbox_send(cpu, i); + action >>= 1; + } +} + +static void octeon_78xx_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int cpu; + + for_each_cpu(cpu, mask) + octeon_78xx_send_ipi_single(cpu, action); +} + +static const struct plat_smp_ops octeon_78xx_smp_ops = { + .send_ipi_single = octeon_78xx_send_ipi_single, + .send_ipi_mask = octeon_78xx_send_ipi_mask, + .init_secondary = octeon_init_secondary, + .smp_finish = octeon_smp_finish, + .boot_secondary = octeon_boot_secondary, + .smp_setup = octeon_smp_setup, + .prepare_cpus = octeon_78xx_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = octeon_cpu_disable, + .cpu_die = octeon_cpu_die, +#endif +}; + +void __init octeon_setup_smp(void) +{ + const struct plat_smp_ops *ops; + + if (octeon_has_feature(OCTEON_FEATURE_CIU3)) + ops = &octeon_78xx_smp_ops; + else + ops = &octeon_smp_ops; + + register_smp_ops(ops); +} |