diff options
Diffstat (limited to 'arch/mips/include/asm/mach-pnx833x/gpio.h')
| -rw-r--r-- | arch/mips/include/asm/mach-pnx833x/gpio.h | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h new file mode 100644 index 000000000..f192acf4a --- /dev/null +++ b/arch/mips/include/asm/mach-pnx833x/gpio.h @@ -0,0 +1,172 @@ +/* + * gpio.h: GPIO Support for PNX833X. + * + * Copyright 2008 NXP Semiconductors + * Chris Steel <chris.steel@nxp.com> + * Daniel Laird <daniel.j.laird@nxp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H +#define __ASM_MIPS_MACH_PNX833X_GPIO_H + +/* BIG FAT WARNING: races danger! + No protections exist here. Current users are only early init code, + when locking is not needed because no concurrency yet exists there, + and GPIO IRQ dispatcher, which does locking. + However, if many uses will ever happen, proper locking will be needed + - including locking between different uses +*/ + +#include <asm/mach-pnx833x/pnx833x.h> + +#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0) +#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0) + +/* Initialize GPIO to a known state */ +static inline void pnx833x_gpio_init(void) +{ + PNX833X_PIO_DIR = 0; + PNX833X_PIO_DIR2 = 0; + PNX833X_PIO_SEL = 0; + PNX833X_PIO_SEL2 = 0; + PNX833X_PIO_INT_EDGE = 0; + PNX833X_PIO_INT_HI = 0; + PNX833X_PIO_INT_LO = 0; + + /* clear any GPIO interrupt requests */ + PNX833X_PIO_INT_CLEAR = 0xffff; + PNX833X_PIO_INT_CLEAR = 0; + PNX833X_PIO_INT_ENABLE = 0; +} + +/* Select GPIO direction for a pin */ +static inline void pnx833x_gpio_select_input(unsigned int pin) +{ + if (pin < 32) + CLEAR_REG_BIT(PNX833X_PIO_DIR, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31); +} +static inline void pnx833x_gpio_select_output(unsigned int pin) +{ + if (pin < 32) + SET_REG_BIT(PNX833X_PIO_DIR, pin); + else + SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31); +} + +/* Select GPIO or alternate function for a pin */ +static inline void pnx833x_gpio_select_function_io(unsigned int pin) +{ + if (pin < 32) + CLEAR_REG_BIT(PNX833X_PIO_SEL, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31); +} +static inline void pnx833x_gpio_select_function_alt(unsigned int pin) +{ + if (pin < 32) + SET_REG_BIT(PNX833X_PIO_SEL, pin); + else + SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31); +} + +/* Read GPIO pin */ +static inline int pnx833x_gpio_read(unsigned int pin) +{ + if (pin < 32) + return (PNX833X_PIO_IN >> pin) & 1; + else + return (PNX833X_PIO_IN2 >> (pin & 31)) & 1; +} + +/* Write GPIO pin */ +static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin) +{ + if (pin < 32) { + if (val) + SET_REG_BIT(PNX833X_PIO_OUT, pin); + else + CLEAR_REG_BIT(PNX833X_PIO_OUT, pin); + } else { + if (val) + SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31); + else + CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31); + } +} + +/* Configure GPIO interrupt */ +#define GPIO_INT_NONE 0 +#define GPIO_INT_LEVEL_LOW 1 +#define GPIO_INT_LEVEL_HIGH 2 +#define GPIO_INT_EDGE_RISING 3 +#define GPIO_INT_EDGE_FALLING 4 +#define GPIO_INT_EDGE_BOTH 5 +static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin) +{ + switch (when) { + case GPIO_INT_LEVEL_LOW: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_LEVEL_HIGH: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_RISING: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_FALLING: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + case GPIO_INT_EDGE_BOTH: + SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + SET_REG_BIT(PNX833X_PIO_INT_HI, pin); + SET_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + default: + CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); + break; + } +} + +/* Enable/disable GPIO interrupt */ +static inline void pnx833x_gpio_enable_irq(unsigned int pin) +{ + SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); +} +static inline void pnx833x_gpio_disable_irq(unsigned int pin) +{ + CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); +} + +/* Clear GPIO interrupt request */ +static inline void pnx833x_gpio_clear_irq(unsigned int pin) +{ + SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); + CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); +} + +#endif |