diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/mips/kernel/bmips_vec.S | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S new file mode 100644 index 000000000..921a5fa55 --- /dev/null +++ b/arch/mips/kernel/bmips_vec.S @@ -0,0 +1,322 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * Reset/NMI/re-entry vectors for BMIPS processors + */ + + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/cacheops.h> +#include <asm/cpu.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/addrspace.h> +#include <asm/hazards.h> +#include <asm/bmips.h> + + .macro BARRIER + .set mips32 + _ssnop + _ssnop + _ssnop + .set mips0 + .endm + +/*********************************************************************** + * Alternate CPU1 startup vector for BMIPS4350 + * + * On some systems the bootloader has already started CPU1 and configured + * it to resume execution at 0x8000_0200 (!BEV IV vector) when it is + * triggered by the SW1 interrupt. If that is the case we try to move + * it to a more convenient place: BMIPS_WARM_RESTART_VEC @ 0x8000_0380. + ***********************************************************************/ + +LEAF(bmips_smp_movevec) + la k0, 1f + li k1, CKSEG1 + or k0, k1 + jr k0 + +1: + /* clear IV, pending IPIs */ + mtc0 zero, CP0_CAUSE + + /* re-enable IRQs to wait for SW1 */ + li k0, ST0_IE | ST0_BEV | STATUSF_IP1 + mtc0 k0, CP0_STATUS + + /* set up CPU1 CBR; move BASE to 0xa000_0000 */ + li k0, 0xff400000 + mtc0 k0, $22, 6 + /* set up relocation vector address based on thread ID */ + mfc0 k1, $22, 3 + srl k1, 16 + andi k1, 0x8000 + or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0 + or k0, k1 + li k1, 0xa0080000 + sw k1, 0(k0) + + /* wait here for SW1 interrupt from bmips_boot_secondary() */ + wait + + la k0, bmips_reset_nmi_vec + li k1, CKSEG1 + or k0, k1 + jr k0 +END(bmips_smp_movevec) + +/*********************************************************************** + * Reset/NMI vector + * For BMIPS processors that can relocate their exception vectors, this + * entire function gets copied to 0x8000_0000. + ***********************************************************************/ + +NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) + .set push + .set noat + .align 4 + +#ifdef CONFIG_SMP + /* if the NMI bit is clear, assume this is a CPU1 reset instead */ + li k1, (1 << 19) + mfc0 k0, CP0_STATUS + and k0, k1 + beqz k0, soft_reset + +#if defined(CONFIG_CPU_BMIPS5000) + mfc0 k0, CP0_PRID + li k1, PRID_IMP_BMIPS5000 + /* mask with PRID_IMP_BMIPS5000 to cover both variants */ + andi k0, PRID_IMP_BMIPS5000 + bne k0, k1, 1f + + /* if we're not on core 0, this must be the SMP boot signal */ + li k1, (3 << 25) + mfc0 k0, $22 + and k0, k1 + bnez k0, bmips_smp_entry +1: +#endif /* CONFIG_CPU_BMIPS5000 */ +#endif /* CONFIG_SMP */ + + /* nope, it's just a regular NMI */ + SAVE_ALL + move a0, sp + + /* clear EXL, ERL, BEV so that TLB refills still work */ + mfc0 k0, CP0_STATUS + li k1, ST0_ERL | ST0_EXL | ST0_BEV | ST0_IE + or k0, k1 + xor k0, k1 + mtc0 k0, CP0_STATUS + BARRIER + + /* jump to the NMI handler function */ + la k0, nmi_handler + jr k0 + + RESTORE_ALL + .set arch=r4000 + eret + +#ifdef CONFIG_SMP +soft_reset: + +#if defined(CONFIG_CPU_BMIPS5000) + mfc0 k0, CP0_PRID + andi k0, 0xff00 + li k1, PRID_IMP_BMIPS5200 + bne k0, k1, bmips_smp_entry + + /* if running on TP 1, jump to bmips_smp_entry */ + mfc0 k0, $22 + li k1, (1 << 24) + and k1, k0 + bnez k1, bmips_smp_entry + nop + + /* + * running on TP0, can not be core 0 (the boot core). + * Check for soft reset. Indicates a warm boot + */ + mfc0 k0, $12 + li k1, (1 << 20) + and k0, k1 + beqz k0, bmips_smp_entry + + /* + * Warm boot. + * Cache init is only done on TP0 + */ + la k0, bmips_5xxx_init + jalr k0 + nop + + b bmips_smp_entry + nop +#endif + +/*********************************************************************** + * CPU1 reset vector (used for the initial boot only) + * This is still part of bmips_reset_nmi_vec(). + ***********************************************************************/ + +bmips_smp_entry: + + /* set up CP0 STATUS; enable FPU */ + li k0, 0x30000000 + mtc0 k0, CP0_STATUS + BARRIER + + /* set local CP0 CONFIG to make kseg0 cacheable, write-back */ + mfc0 k0, CP0_CONFIG + ori k0, 0x07 + xori k0, 0x04 + mtc0 k0, CP0_CONFIG + + mfc0 k0, CP0_PRID + andi k0, 0xff00 +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + li k1, PRID_IMP_BMIPS43XX + bne k0, k1, 2f + + /* initialize CPU1's local I-cache */ + li k0, 0x80000000 + li k1, 0x80010000 + mtc0 zero, $28 + mtc0 zero, $28, 1 + BARRIER + +1: cache Index_Store_Tag_I, 0(k0) + addiu k0, 16 + bne k0, k1, 1b + + b 3f +2: +#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */ +#if defined(CONFIG_CPU_BMIPS5000) + /* mask with PRID_IMP_BMIPS5000 to cover both variants */ + li k1, PRID_IMP_BMIPS5000 + andi k0, PRID_IMP_BMIPS5000 + bne k0, k1, 3f + + /* set exception vector base */ + la k0, ebase + lw k0, 0(k0) + mtc0 k0, $15, 1 + BARRIER +#endif /* CONFIG_CPU_BMIPS5000 */ +3: + /* jump back to kseg0 in case we need to remap the kseg1 area */ + la k0, 1f + jr k0 +1: + la k0, bmips_enable_xks01 + jalr k0 + + /* use temporary stack to set up upper memory TLB */ + li sp, BMIPS_WARM_RESTART_VEC + la k0, plat_wired_tlb_setup + jalr k0 + + /* switch to permanent stack and continue booting */ + + .global bmips_secondary_reentry +bmips_secondary_reentry: + la k0, bmips_smp_boot_sp + lw sp, 0(k0) + la k0, bmips_smp_boot_gp + lw gp, 0(k0) + la k0, start_secondary + jr k0 + +#endif /* CONFIG_SMP */ + + .align 4 + .global bmips_reset_nmi_vec_end +bmips_reset_nmi_vec_end: + +END(bmips_reset_nmi_vec) + + .set pop + +/*********************************************************************** + * CPU1 warm restart vector (used for second and subsequent boots). + * Also used for S2 standby recovery (PM). + * This entire function gets copied to (BMIPS_WARM_RESTART_VEC) + ***********************************************************************/ + +LEAF(bmips_smp_int_vec) + + .align 4 + mfc0 k0, CP0_STATUS + ori k0, 0x01 + xori k0, 0x01 + mtc0 k0, CP0_STATUS + eret + + .align 4 + .global bmips_smp_int_vec_end +bmips_smp_int_vec_end: + +END(bmips_smp_int_vec) + +/*********************************************************************** + * XKS01 support + * Certain CPUs support extending kseg0 to 1024MB. + ***********************************************************************/ + +LEAF(bmips_enable_xks01) + +#if defined(CONFIG_XKS01) + mfc0 t0, CP0_PRID + andi t2, t0, 0xff00 +#if defined(CONFIG_CPU_BMIPS4380) + li t1, PRID_IMP_BMIPS43XX + bne t2, t1, 1f + + andi t0, 0xff + addiu t1, t0, -PRID_REV_BMIPS4380_HI + bgtz t1, 2f + addiu t0, -PRID_REV_BMIPS4380_LO + bltz t0, 2f + + mfc0 t0, $22, 3 + li t1, 0x1ff0 + li t2, (1 << 12) | (1 << 9) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 3 + BARRIER + b 2f +1: +#endif /* CONFIG_CPU_BMIPS4380 */ +#if defined(CONFIG_CPU_BMIPS5000) + li t1, PRID_IMP_BMIPS5000 + /* mask with PRID_IMP_BMIPS5000 to cover both variants */ + andi t2, PRID_IMP_BMIPS5000 + bne t2, t1, 2f + + mfc0 t0, $22, 5 + li t1, 0x01ff + li t2, (1 << 8) | (1 << 5) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 5 + BARRIER +#endif /* CONFIG_CPU_BMIPS5000 */ +2: +#endif /* defined(CONFIG_XKS01) */ + + jr ra + +END(bmips_enable_xks01) |