diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/mips/netlogic/xlr/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/fmn-config.c | 293 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/fmn.c | 204 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/platform-flash.c | 217 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/platform.c | 250 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/setup.c | 210 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/wakeup.c | 85 |
7 files changed, 1261 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile new file mode 100644 index 000000000..05902bc6f --- /dev/null +++ b/arch/mips/netlogic/xlr/Makefile @@ -0,0 +1,2 @@ +obj-y += fmn.o fmn-config.o setup.o platform.o platform-flash.o +obj-$(CONFIG_SMP) += wakeup.o diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c new file mode 100644 index 000000000..c7622c6e5 --- /dev/null +++ b/arch/mips/netlogic/xlr/fmn-config.c @@ -0,0 +1,293 @@ +/* + * Copyright (c) 2003-2012 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <asm/cpu-info.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/cpu.h> +#include <asm/mipsregs.h> +#include <asm/netlogic/xlr/fmn.h> +#include <asm/netlogic/xlr/xlr.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> + +struct xlr_board_fmn_config xlr_board_fmn_config; + +static void __maybe_unused print_credit_config(struct xlr_fmn_info *fmn_info) +{ + int bkt; + + pr_info("Bucket size :\n"); + pr_info("Station\t: Size\n"); + for (bkt = 0; bkt < 16; bkt++) + pr_info(" %d %d %d %d %d %d %d %d\n", + xlr_board_fmn_config.bucket_size[(bkt * 8) + 0], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 1], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 2], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 3], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 4], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 5], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 6], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 7]); + pr_info("\n"); + + pr_info("Credits distribution :\n"); + pr_info("Station\t: Size\n"); + for (bkt = 0; bkt < 16; bkt++) + pr_info(" %d %d %d %d %d %d %d %d\n", + fmn_info->credit_config[(bkt * 8) + 0], + fmn_info->credit_config[(bkt * 8) + 1], + fmn_info->credit_config[(bkt * 8) + 2], + fmn_info->credit_config[(bkt * 8) + 3], + fmn_info->credit_config[(bkt * 8) + 4], + fmn_info->credit_config[(bkt * 8) + 5], + fmn_info->credit_config[(bkt * 8) + 6], + fmn_info->credit_config[(bkt * 8) + 7]); + pr_info("\n"); +} + +static void check_credit_distribution(void) +{ + struct xlr_board_fmn_config *cfg = &xlr_board_fmn_config; + int bkt, n, total_credits, ncores; + + ncores = hweight32(nlm_current_node()->coremask); + for (bkt = 0; bkt < 128; bkt++) { + total_credits = 0; + for (n = 0; n < ncores; n++) + total_credits += cfg->cpu[n].credit_config[bkt]; + total_credits += cfg->gmac[0].credit_config[bkt]; + total_credits += cfg->gmac[1].credit_config[bkt]; + total_credits += cfg->dma.credit_config[bkt]; + total_credits += cfg->cmp.credit_config[bkt]; + total_credits += cfg->sae.credit_config[bkt]; + total_credits += cfg->xgmac[0].credit_config[bkt]; + total_credits += cfg->xgmac[1].credit_config[bkt]; + if (total_credits > cfg->bucket_size[bkt]) + pr_err("ERROR: Bucket %d: credits (%d) > size (%d)\n", + bkt, total_credits, cfg->bucket_size[bkt]); + } + pr_info("Credit distribution complete.\n"); +} + +/** + * Configure bucket size and credits for a device. 'size' is the size of + * the buckets for the device. This size is distributed among all the CPUs + * so that all of them can send messages to the device. + * + * The device is also given 'cpu_credits' to send messages to the CPUs + * + * @dev_info: FMN information structure for each devices + * @start_stn_id: Starting station id of dev_info + * @end_stn_id: End station id of dev_info + * @num_buckets: Total number of buckets for den_info + * @cpu_credits: Allowed credits to cpu for each devices pointing by dev_info + * @size: Size of the each buckets in the device station + */ +static void setup_fmn_cc(struct xlr_fmn_info *dev_info, int start_stn_id, + int end_stn_id, int num_buckets, int cpu_credits, int size) +{ + int i, j, num_core, n, credits_per_cpu; + struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu; + + num_core = hweight32(nlm_current_node()->coremask); + dev_info->num_buckets = num_buckets; + dev_info->start_stn_id = start_stn_id; + dev_info->end_stn_id = end_stn_id; + + n = num_core; + if (num_core == 3) + n = 4; + + for (i = start_stn_id; i <= end_stn_id; i++) { + xlr_board_fmn_config.bucket_size[i] = size; + + /* Dividing device credits equally to cpus */ + credits_per_cpu = size / n; + for (j = 0; j < num_core; j++) + cpu[j].credit_config[i] = credits_per_cpu; + + /* credits left to distribute */ + credits_per_cpu = size - (credits_per_cpu * num_core); + + /* distribute the remaining credits (if any), among cores */ + for (j = 0; (j < num_core) && (credits_per_cpu >= 4); j++) { + cpu[j].credit_config[i] += 4; + credits_per_cpu -= 4; + } + } + + /* Distributing cpu per bucket credits to devices */ + for (i = 0; i < num_core; i++) { + for (j = 0; j < FMN_CORE_NBUCKETS; j++) + dev_info->credit_config[(i * 8) + j] = cpu_credits; + } +} + +/* + * Each core has 256 slots and 8 buckets, + * Configure the 8 buckets each with 32 slots + */ +static void setup_cpu_fmninfo(struct xlr_fmn_info *cpu, int num_core) +{ + int i, j; + + for (i = 0; i < num_core; i++) { + cpu[i].start_stn_id = (8 * i); + cpu[i].end_stn_id = (8 * i + 8); + + for (j = cpu[i].start_stn_id; j < cpu[i].end_stn_id; j++) + xlr_board_fmn_config.bucket_size[j] = 32; + } +} + +/** + * Setup the FMN details for each devices according to the device available + * in each variant of XLR/XLS processor + */ +void xlr_board_info_setup(void) +{ + struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu; + struct xlr_fmn_info *gmac = xlr_board_fmn_config.gmac; + struct xlr_fmn_info *xgmac = xlr_board_fmn_config.xgmac; + struct xlr_fmn_info *dma = &xlr_board_fmn_config.dma; + struct xlr_fmn_info *cmp = &xlr_board_fmn_config.cmp; + struct xlr_fmn_info *sae = &xlr_board_fmn_config.sae; + int processor_id, num_core; + + num_core = hweight32(nlm_current_node()->coremask); + processor_id = read_c0_prid() & PRID_IMP_MASK; + + setup_cpu_fmninfo(cpu, num_core); + switch (processor_id) { + case PRID_IMP_NETLOGIC_XLS104: + case PRID_IMP_NETLOGIC_XLS108: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLS204: + case PRID_IMP_NETLOGIC_XLS208: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLS404: + case PRID_IMP_NETLOGIC_XLS408: + case PRID_IMP_NETLOGIC_XLS404B: + case PRID_IMP_NETLOGIC_XLS408B: + case PRID_IMP_NETLOGIC_XLS416B: + case PRID_IMP_NETLOGIC_XLS608B: + case PRID_IMP_NETLOGIC_XLS616B: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 8, 32); + setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0, + FMN_STNID_GMAC1_TX3, 8, 8, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 4, 64); + setup_fmn_cc(cmp, FMN_STNID_CMP_0, + FMN_STNID_CMP_3, 4, 4, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLS412B: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 8, 32); + setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0, + FMN_STNID_GMAC1_TX3, 8, 8, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 4, 64); + setup_fmn_cc(cmp, FMN_STNID_CMP_0, + FMN_STNID_CMP_3, 4, 4, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLR308: + case PRID_IMP_NETLOGIC_XLR308C: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 4, 128); + break; + + case PRID_IMP_NETLOGIC_XLR532: + case PRID_IMP_NETLOGIC_XLR532C: + case PRID_IMP_NETLOGIC_XLR516C: + case PRID_IMP_NETLOGIC_XLR508C: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 4, 128); + break; + + case PRID_IMP_NETLOGIC_XLR732: + case PRID_IMP_NETLOGIC_XLR716: + setup_fmn_cc(&xgmac[0], FMN_STNID_XMAC0_00_TX, + FMN_STNID_XMAC0_15_TX, 8, 0, 32); + setup_fmn_cc(&xgmac[1], FMN_STNID_XMAC1_00_TX, + FMN_STNID_XMAC1_15_TX, 8, 0, 32); + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 24, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 4, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 4, 128); + break; + default: + pr_err("Unknown CPU with processor ID [%d]\n", processor_id); + pr_err("Error: Cannot initialize FMN credits.\n"); + } + + check_credit_distribution(); + +#if 0 /* debug */ + print_credit_config(&cpu[0]); + print_credit_config(&gmac[0]); +#endif +} diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c new file mode 100644 index 000000000..d428e8471 --- /dev/null +++ b/arch/mips/netlogic/xlr/fmn.c @@ -0,0 +1,204 @@ +/* + * Copyright (c) 2003-2012 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/irqreturn.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/mipsregs.h> +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/xlr/fmn.h> +#include <asm/netlogic/common.h> + +#define COP2_CC_INIT_CPU_DEST(dest, conf) \ +do { \ + nlm_write_c2_cc##dest(0, conf[(dest * 8) + 0]); \ + nlm_write_c2_cc##dest(1, conf[(dest * 8) + 1]); \ + nlm_write_c2_cc##dest(2, conf[(dest * 8) + 2]); \ + nlm_write_c2_cc##dest(3, conf[(dest * 8) + 3]); \ + nlm_write_c2_cc##dest(4, conf[(dest * 8) + 4]); \ + nlm_write_c2_cc##dest(5, conf[(dest * 8) + 5]); \ + nlm_write_c2_cc##dest(6, conf[(dest * 8) + 6]); \ + nlm_write_c2_cc##dest(7, conf[(dest * 8) + 7]); \ +} while (0) + +struct fmn_message_handler { + void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *); + void *arg; +} msg_handlers[128]; + +/* + * FMN interrupt handler. We configure the FMN so that any messages in + * any of the CPU buckets will trigger an interrupt on the CPU. + * The message can be from any device on the FMN (like NAE/SAE/DMA). + * The source station id is used to figure out which of the registered + * handlers have to be called. + */ +static irqreturn_t fmn_message_handler(int irq, void *data) +{ + struct fmn_message_handler *hndlr; + int bucket, rv; + int size = 0, code = 0, src_stnid = 0; + struct nlm_fmn_msg msg; + uint32_t mflags, bkt_status; + + mflags = nlm_cop2_enable_irqsave(); + /* Disable message ring interrupt */ + nlm_fmn_setup_intr(irq, 0); + while (1) { + /* 8 bkts per core, [24:31] each bit represents one bucket + * Bit is Zero if bucket is not empty */ + bkt_status = (nlm_read_c2_status0() >> 24) & 0xff; + if (bkt_status == 0xff) + break; + for (bucket = 0; bucket < 8; bucket++) { + /* Continue on empty bucket */ + if (bkt_status & (1 << bucket)) + continue; + rv = nlm_fmn_receive(bucket, &size, &code, &src_stnid, + &msg); + if (rv != 0) + continue; + + hndlr = &msg_handlers[src_stnid]; + if (hndlr->action == NULL) + pr_warn("No msgring handler for stnid %d\n", + src_stnid); + else { + nlm_cop2_disable_irqrestore(mflags); + hndlr->action(bucket, src_stnid, size, code, + &msg, hndlr->arg); + mflags = nlm_cop2_enable_irqsave(); + } + } + }; + /* Enable message ring intr, to any thread in core */ + nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1); + nlm_cop2_disable_irqrestore(mflags); + return IRQ_HANDLED; +} + +struct irqaction fmn_irqaction = { + .handler = fmn_message_handler, + .flags = IRQF_PERCPU, + .name = "fmn", +}; + +void xlr_percpu_fmn_init(void) +{ + struct xlr_fmn_info *cpu_fmn_info; + int *bucket_sizes; + uint32_t flags; + int id; + + BUG_ON(nlm_thread_id() != 0); + id = nlm_core_id(); + + bucket_sizes = xlr_board_fmn_config.bucket_size; + cpu_fmn_info = &xlr_board_fmn_config.cpu[id]; + flags = nlm_cop2_enable_irqsave(); + + /* Setup bucket sizes for the core. */ + nlm_write_c2_bucksize(0, bucket_sizes[id * 8 + 0]); + nlm_write_c2_bucksize(1, bucket_sizes[id * 8 + 1]); + nlm_write_c2_bucksize(2, bucket_sizes[id * 8 + 2]); + nlm_write_c2_bucksize(3, bucket_sizes[id * 8 + 3]); + nlm_write_c2_bucksize(4, bucket_sizes[id * 8 + 4]); + nlm_write_c2_bucksize(5, bucket_sizes[id * 8 + 5]); + nlm_write_c2_bucksize(6, bucket_sizes[id * 8 + 6]); + nlm_write_c2_bucksize(7, bucket_sizes[id * 8 + 7]); + + /* + * For sending FMN messages, we need credits on the destination + * bucket. Program the credits this core has on the 128 possible + * destination buckets. + * We cannot use a loop here, because the the first argument has + * to be a constant integer value. + */ + COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(1, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(2, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(3, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(4, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(5, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(6, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(7, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(8, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(9, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(10, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(11, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(12, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(13, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(14, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(15, cpu_fmn_info->credit_config); + + /* enable FMN interrupts on this CPU */ + nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1); + nlm_cop2_disable_irqrestore(flags); +} + + +/* + * Register a FMN message handler with respect to the source station id + * @stnid: source station id + * @action: Handler function pointer + */ +int nlm_register_fmn_handler(int start_stnid, int end_stnid, + void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *), + void *arg) +{ + int sstnid; + + for (sstnid = start_stnid; sstnid <= end_stnid; sstnid++) { + msg_handlers[sstnid].arg = arg; + smp_wmb(); + msg_handlers[sstnid].action = action; + } + pr_debug("Registered FMN msg handler for stnid %d-%d\n", + start_stnid, end_stnid); + return 0; +} + +void nlm_setup_fmn_irq(void) +{ + uint32_t flags; + + /* setup irq only once */ + setup_irq(IRQ_FMN, &fmn_irqaction); + + flags = nlm_cop2_enable_irqsave(); + nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1); + nlm_cop2_disable_irqrestore(flags); +} diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c new file mode 100644 index 000000000..4d1b4c003 --- /dev/null +++ b/arch/mips/netlogic/xlr/platform-flash.c @@ -0,0 +1,217 @@ +/* + * Copyright 2011, Netlogic Microsystems. + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/resource.h> +#include <linux/spi/flash.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/rawnand.h> +#include <linux/mtd/partitions.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/flash.h> +#include <asm/netlogic/xlr/bridge.h> +#include <asm/netlogic/xlr/gpio.h> +#include <asm/netlogic/xlr/xlr.h> + +/* + * Default NOR partition layout + */ +static struct mtd_partition xlr_nor_parts[] = { + { + .name = "User FS", + .offset = 0x800000, + .size = MTDPART_SIZ_FULL, + } +}; + +/* + * Default NAND partition layout + */ +static struct mtd_partition xlr_nand_parts[] = { + { + .name = "Root Filesystem", + .offset = 64 * 64 * 2048, + .size = 432 * 64 * 2048, + }, + { + .name = "Home Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +/* Use PHYSMAP flash for NOR */ +struct physmap_flash_data xlr_nor_data = { + .width = 2, + .parts = xlr_nor_parts, + .nr_parts = ARRAY_SIZE(xlr_nor_parts), +}; + +static struct resource xlr_nor_res[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device xlr_nor_dev = { + .name = "physmap-flash", + .dev = { + .platform_data = &xlr_nor_data, + }, + .num_resources = ARRAY_SIZE(xlr_nor_res), + .resource = xlr_nor_res, +}; + +/* + * Use "gen_nand" driver for NAND flash + * + * There seems to be no way to store a private pointer containing + * platform specific info in gen_nand drivier. We will use a global + * struct for now, since we currently have only one NAND chip per board. + */ +struct xlr_nand_flash_priv { + int cs; + uint64_t flash_mmio; +}; + +static struct xlr_nand_flash_priv nand_priv; + +static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + if (ctrl & NAND_CLE) + nlm_write_reg(nand_priv.flash_mmio, + FLASH_NAND_CLE(nand_priv.cs), cmd); + else if (ctrl & NAND_ALE) + nlm_write_reg(nand_priv.flash_mmio, + FLASH_NAND_ALE(nand_priv.cs), cmd); +} + +struct platform_nand_data xlr_nand_data = { + .chip = { + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(xlr_nand_parts), + .chip_delay = 50, + .partitions = xlr_nand_parts, + }, + .ctrl = { + .cmd_ctrl = xlr_nand_ctrl, + }, +}; + +static struct resource xlr_nand_res[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device xlr_nand_dev = { + .name = "gen_nand", + .id = -1, + .num_resources = ARRAY_SIZE(xlr_nand_res), + .resource = xlr_nand_res, + .dev = { + .platform_data = &xlr_nand_data, + } +}; + +/* + * XLR/XLS supports upto 8 devices on its FLASH interface. The value in + * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the + * flash devices. + * Under this, each flash device has an offset and size given by the + * CSBASE_ADDR and CSBASE_MASK registers for the device. + * + * The CSBASE_ registers are expected to be setup by the bootloader. + */ +static void setup_flash_resource(uint64_t flash_mmio, + uint64_t flash_map_base, int cs, struct resource *res) +{ + u32 base, mask; + + base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs)); + mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs)); + + res->start = flash_map_base + ((unsigned long)base << 16); + res->end = res->start + (mask + 1) * 64 * 1024; +} + +static int __init xlr_flash_init(void) +{ + uint64_t gpio_mmio, flash_mmio, flash_map_base; + u32 gpio_resetcfg, flash_bar; + int cs, boot_nand, boot_nor; + + /* Flash address bits 39:24 is in bridge flash BAR */ + flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR); + flash_map_base = (flash_bar & 0xffff0000) << 8; + + gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); + flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET); + + /* Get the chip reset config */ + gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG); + + /* Check for boot flash type */ + boot_nor = boot_nand = 0; + if (nlm_chip_is_xls()) { + /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */ + if (gpio_resetcfg & (1 << 16)) + boot_nand = 1; + + /* check boot from PCMCIA, (GPIO reset reg bit 15 */ + if ((gpio_resetcfg & (1 << 15)) == 0) + boot_nor = 1; /* not set, booted from NOR */ + } else { /* XLR */ + /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */ + if ((gpio_resetcfg & (1 << 16)) == 0) + boot_nor = 1; /* not set, booted from NOR */ + } + + /* boot flash at chip select 0 */ + cs = 0; + + if (boot_nand) { + nand_priv.cs = cs; + nand_priv.flash_mmio = flash_mmio; + setup_flash_resource(flash_mmio, flash_map_base, cs, + xlr_nand_res); + + /* Initialize NAND flash at CS 0 */ + nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs), + FLASH_NAND_CSDEV_PARAM); + nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs), + FLASH_NAND_CSTIME_PARAMA); + nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs), + FLASH_NAND_CSTIME_PARAMB); + + pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res); + return platform_device_register(&xlr_nand_dev); + } + + if (boot_nor) { + setup_flash_resource(flash_mmio, flash_map_base, cs, + xlr_nor_res); + pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res); + return platform_device_register(&xlr_nor_dev); + } + return 0; +} + +arch_initcall(xlr_flash_init); diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c new file mode 100644 index 000000000..4785932af --- /dev/null +++ b/arch/mips/netlogic/xlr/platform.c @@ -0,0 +1,250 @@ +/* + * Copyright 2011, Netlogic Microsystems. + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/resource.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> +#include <linux/i2c.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) +{ + uint64_t uartbase; + unsigned int value; + + /* sign extend to 64 bits, if needed */ + uartbase = (uint64_t)(long)p->membase; + value = nlm_read_reg(uartbase, offset); + + /* See XLR/XLS errata */ + if (offset == UART_MSR) + value ^= 0xF0; + else if (offset == UART_MCR) + value ^= 0x3; + + return value; +} + +static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) +{ + uint64_t uartbase; + + /* sign extend to 64 bits, if needed */ + uartbase = (uint64_t)(long)p->membase; + + /* See XLR/XLS errata */ + if (offset == UART_MSR) + value ^= 0xF0; + else if (offset == UART_MCR) + value ^= 0x3; + + nlm_write_reg(uartbase, offset, value); +} + +#define PORT(_irq) \ + { \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_MEM32, \ + .flags = (UPF_SKIP_TEST | \ + UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\ + .uartclk = PIC_CLK_HZ, \ + .type = PORT_16550A, \ + .serial_in = nlm_xlr_uart_in, \ + .serial_out = nlm_xlr_uart_out, \ + } + +static struct plat_serial8250_port xlr_uart_data[] = { + PORT(PIC_UART_0_IRQ), + PORT(PIC_UART_1_IRQ), + {}, +}; + +static struct platform_device uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = xlr_uart_data, + }, +}; + +static int __init nlm_uart_init(void) +{ + unsigned long uartbase; + + uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET); + xlr_uart_data[0].membase = (void __iomem *)uartbase; + xlr_uart_data[0].mapbase = CPHYSADDR(uartbase); + + uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET); + xlr_uart_data[1].membase = (void __iomem *)uartbase; + xlr_uart_data[1].mapbase = CPHYSADDR(uartbase); + + return platform_device_register(&uart_device); +} + +arch_initcall(nlm_uart_init); + +#ifdef CONFIG_USB +/* Platform USB devices, only on XLS chips */ +static u64 xls_usb_dmamask = ~(u32)0; +#define USB_PLATFORM_DEV(n, i, irq) \ + { \ + .name = n, \ + .id = i, \ + .num_resources = 2, \ + .dev = { \ + .dma_mask = &xls_usb_dmamask, \ + .coherent_dma_mask = 0xffffffff, \ + }, \ + .resource = (struct resource[]) { \ + { \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }, \ + } + +static struct usb_ehci_pdata xls_usb_ehci_pdata = { + .caps_offset = 0, +}; + +static struct usb_ohci_pdata xls_usb_ohci_pdata; + +static struct platform_device xls_usb_ehci_device = + USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ); +static struct platform_device xls_usb_ohci_device_0 = + USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ); +static struct platform_device xls_usb_ohci_device_1 = + USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ); + +static struct platform_device *xls_platform_devices[] = { + &xls_usb_ehci_device, + &xls_usb_ohci_device_0, + &xls_usb_ohci_device_1, +}; + +int xls_platform_usb_init(void) +{ + uint64_t usb_mmio, gpio_mmio; + unsigned long memres; + uint32_t val; + + if (!nlm_chip_is_xls()) + return 0; + + gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); + usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET); + + /* Clear Rogue Phy INTs */ + nlm_write_reg(usb_mmio, 49, 0x10000000); + /* Enable all interrupts */ + nlm_write_reg(usb_mmio, 50, 0x1f000000); + + /* Enable ports */ + nlm_write_reg(usb_mmio, 1, 0x07000500); + + val = nlm_read_reg(gpio_mmio, 21); + if (((val >> 22) & 0x01) == 0) { + pr_info("Detected USB Device mode - Not supported!\n"); + nlm_write_reg(usb_mmio, 0, 0x01000000); + return 0; + } + + pr_info("Detected USB Host mode - Adding XLS USB devices.\n"); + /* Clear reset, host mode */ + nlm_write_reg(usb_mmio, 0, 0x02000000); + + /* Memory resource for various XLS usb ports */ + usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET); + memres = CPHYSADDR((unsigned long)usb_mmio); + xls_usb_ehci_device.resource[0].start = memres; + xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1; + xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata; + + memres += 0x400; + xls_usb_ohci_device_0.resource[0].start = memres; + xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1; + xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata; + + memres += 0x400; + xls_usb_ohci_device_1.resource[0].start = memres; + xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1; + xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata; + + return platform_add_devices(xls_platform_devices, + ARRAY_SIZE(xls_platform_devices)); +} + +arch_initcall(xls_platform_usb_init); +#endif + +#ifdef CONFIG_I2C +static struct i2c_board_info nlm_i2c_board_info1[] __initdata = { + /* All XLR boards have this RTC and Max6657 Temp Chip */ + [0] = { + .type = "ds1374", + .addr = 0x68 + }, + [1] = { + .type = "lm90", + .addr = 0x4c + }, +}; + +static struct resource i2c_resources[] = { + [0] = { + .start = 0, /* filled at init */ + .end = 0, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device nlm_xlr_i2c_1 = { + .name = "xlr-i2cbus", + .id = 1, + .num_resources = 1, + .resource = i2c_resources, +}; + +static int __init nlm_i2c_init(void) +{ + int err = 0; + unsigned int offset; + + /* I2C bus 0 does not have any useful devices, configure only bus 1 */ + offset = NETLOGIC_IO_I2C_1_OFFSET; + nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset)); + nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff; + + platform_device_register(&nlm_xlr_i2c_1); + + err = i2c_register_board_info(1, nlm_i2c_board_info1, + ARRAY_SIZE(nlm_i2c_board_info1)); + if (err < 0) + pr_err("nlm-i2c: cannot register board I2C devices\n"); + return err; +} + +arch_initcall(nlm_i2c_init); +#endif diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c new file mode 100644 index 000000000..72ceddc9a --- /dev/null +++ b/arch/mips/netlogic/xlr/setup.c @@ -0,0 +1,210 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/serial_8250.h> +#include <linux/pm.h> + +#include <asm/idle.h> +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/bootinfo.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/psb-bootinfo.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlr/xlr.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/gpio.h> +#include <asm/netlogic/xlr/fmn.h> + +uint64_t nlm_io_base = DEFAULT_NETLOGIC_IO_BASE; +struct psb_info nlm_prom_info; + +/* default to uniprocessor */ +unsigned int nlm_threads_per_core = 1; +struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; +cpumask_t nlm_cpumask = CPU_MASK_CPU0; + +static void nlm_linux_exit(void) +{ + uint64_t gpiobase; + + gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); + /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */ + nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1); + for ( ; ; ) + cpu_wait(); +} + +void __init plat_mem_setup(void) +{ + _machine_restart = (void (*)(char *))nlm_linux_exit; + _machine_halt = nlm_linux_exit; + pm_power_off = nlm_linux_exit; +} + +const char *get_system_type(void) +{ + return "Netlogic XLR/XLS Series"; +} + +unsigned int nlm_get_cpu_frequency(void) +{ + return (unsigned int)nlm_prom_info.cpu_frequency; +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing yet */ +} + +void nlm_percpu_init(int hwcpuid) +{ + if (hwcpuid % 4 == 0) + xlr_percpu_fmn_init(); +} + +static void __init build_arcs_cmdline(int *argv) +{ + int i, remain, len; + char *arg; + + remain = sizeof(arcs_cmdline) - 1; + arcs_cmdline[0] = '\0'; + for (i = 0; argv[i] != 0; i++) { + arg = (char *)(long)argv[i]; + len = strlen(arg); + if (len + 1 > remain) + break; + strcat(arcs_cmdline, arg); + strcat(arcs_cmdline, " "); + remain -= len + 1; + } + + /* Add the default options here */ + if ((strstr(arcs_cmdline, "console=")) == NULL) { + arg = "console=ttyS0,38400 "; + len = strlen(arg); + if (len > remain) + goto fail; + strcat(arcs_cmdline, arg); + remain -= len; + } +#ifdef CONFIG_BLK_DEV_INITRD + if ((strstr(arcs_cmdline, "rdinit=")) == NULL) { + arg = "rdinit=/sbin/init "; + len = strlen(arg); + if (len > remain) + goto fail; + strcat(arcs_cmdline, arg); + remain -= len; + } +#endif + return; +fail: + panic("Cannot add %s, command line too big!", arg); +} + +static void prom_add_memory(void) +{ + struct nlm_boot_mem_map *bootm; + u64 start, size; + u64 pref_backup = 512; /* avoid pref walking beyond end */ + int i; + + bootm = (void *)(long)nlm_prom_info.psb_mem_map; + for (i = 0; i < bootm->nr_map; i++) { + if (bootm->map[i].type != BOOT_MEM_RAM) + continue; + start = bootm->map[i].addr; + size = bootm->map[i].size; + + /* Work around for using bootloader mem */ + if (i == 0 && start == 0 && size == 0x0c000000) + size = 0x0ff00000; + + add_memory_region(start, size - pref_backup, BOOT_MEM_RAM); + } +} + +static void nlm_init_node(void) +{ + struct nlm_soc_info *nodep; + + nodep = nlm_current_node(); + nodep->picbase = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET); + nodep->ebase = read_c0_ebase() & MIPS_EBASE_BASE; + spin_lock_init(&nodep->piclock); +} + +void __init prom_init(void) +{ + int *argv, *envp; /* passed as 32 bit ptrs */ + struct psb_info *prom_infop; + void *reset_vec; +#ifdef CONFIG_SMP + int i; +#endif + + /* truncate to 32 bit and sign extend all args */ + argv = (int *)(long)(int)fw_arg1; + envp = (int *)(long)(int)fw_arg2; + prom_infop = (struct psb_info *)(long)(int)fw_arg3; + + nlm_prom_info = *prom_infop; + nlm_init_node(); + + /* Update reset entry point with CPU init code */ + reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS); + memset(reset_vec, 0, RESET_VEC_SIZE); + memcpy(reset_vec, (void *)nlm_reset_entry, + (nlm_reset_entry_end - nlm_reset_entry)); + + build_arcs_cmdline(argv); + prom_add_memory(); + +#ifdef CONFIG_SMP + for (i = 0; i < 32; i++) + if (nlm_prom_info.online_cpu_map & (1 << i)) + cpumask_set_cpu(i, &nlm_cpumask); + nlm_wakeup_secondary_cpus(); + register_smp_ops(&nlm_smp_ops); +#endif + xlr_board_info_setup(); + xlr_percpu_fmn_init(); +} diff --git a/arch/mips/netlogic/xlr/wakeup.c b/arch/mips/netlogic/xlr/wakeup.c new file mode 100644 index 000000000..d61cba1e9 --- /dev/null +++ b/arch/mips/netlogic/xlr/wakeup.c @@ -0,0 +1,85 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/delay.h> +#include <linux/threads.h> + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/string.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/mips-extns.h> + +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> + +int xlr_wakeup_secondary_cpus(void) +{ + struct nlm_soc_info *nodep; + unsigned int i, j, boot_cpu; + volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY); + + /* + * In case of RMI boot, hit with NMI to get the cores + * from bootloader to linux code. + */ + nodep = nlm_get_node(0); + boot_cpu = hard_smp_processor_id(); + nlm_set_nmi_handler(nlm_rmiboot_preboot); + for (i = 0; i < NR_CPUS; i++) { + if (i == boot_cpu || !cpumask_test_cpu(i, &nlm_cpumask)) + continue; + nlm_pic_send_ipi(nodep->picbase, i, 1, 1); /* send NMI */ + } + + /* Fill up the coremask early */ + nodep->coremask = 1; + for (i = 1; i < nlm_cores_per_node(); i++) { + for (j = 1000000; j > 0; j--) { + if (cpu_ready[i * NLM_THREADS_PER_CORE]) + break; + udelay(10); + } + if (j != 0) + nodep->coremask |= (1u << i); + else + pr_err("Failed to wakeup core %d\n", i); + } + + return 0; +} |