1 files changed, 100 insertions, 0 deletions
diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
new file mode 100644
index 000000000..b4c020a80
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_time.c
@@ -0,0 +1,100 @@
+/*
+ * Setting up the clock on MSP SOCs.  No RTC typically.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/ptrace.h>
+
+#include <asm/cevt-r4k.h>
+#include <asm/mipsregs.h>
+#include <asm/time.h>
+
+#include <msp_prom.h>
+#include <msp_int.h>
+#include <msp_regs.h>
+
+#define get_current_vpe()   \
+	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+static struct irqaction timer_vpe1;
+static int tim_installed;
+
+void __init plat_time_init(void)
+{
+	char	*endp, *s;
+	unsigned long cpu_rate = 0;
+
+	if (cpu_rate == 0) {
+		s = prom_getenv("clkfreqhz");
+		cpu_rate = simple_strtoul(s, &endp, 10);
+		if (endp != NULL && *endp != 0) {
+			printk(KERN_ERR
+				"Clock rate in Hz parse error: %s\n", s);
+			cpu_rate = 0;
+		}
+	}
+
+	if (cpu_rate == 0) {
+		s = prom_getenv("clkfreq");
+		cpu_rate = 1000 * simple_strtoul(s, &endp, 10);
+		if (endp != NULL && *endp != 0) {
+			printk(KERN_ERR
+				"Clock rate in MHz parse error: %s\n", s);
+			cpu_rate = 0;
+		}
+	}
+
+	if (cpu_rate == 0) {
+#if defined(CONFIG_PMC_MSP7120_EVAL) \
+ || defined(CONFIG_PMC_MSP7120_GW)
+		cpu_rate = 400000000;
+#elif defined(CONFIG_PMC_MSP7120_FPGA)
+		cpu_rate = 25000000;
+#else
+		cpu_rate = 150000000;
+#endif
+		printk(KERN_ERR
+			"Failed to determine CPU clock rate, "
+			"assuming %ld hz ...\n", cpu_rate);
+	}
+
+	printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate);
+
+	/* timer frequency is 1/2 clock rate */
+	mips_hpt_frequency = cpu_rate/2;
+}
+
+unsigned int get_c0_compare_int(void)
+{
+	/* MIPS_MT modes may want timer for second VPE */
+	if ((get_current_vpe()) && !tim_installed) {
+		memcpy(&timer_vpe1, &c0_compare_irqaction, sizeof(timer_vpe1));
+		setup_irq(MSP_INT_VPE1_TIMER, &timer_vpe1);
+		tim_installed++;
+	}
+
+	return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER;
+}