diff options
Diffstat (limited to '')
-rw-r--r-- | arch/powerpc/kernel/pci_of_scan.c | 410 |
1 files changed, 410 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c new file mode 100644 index 000000000..7765837ba --- /dev/null +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -0,0 +1,410 @@ +/* + * Helper routines to scan the device tree for PCI devices and busses + * + * Migrated out of PowerPC architecture pci_64.c file by Grant Likely + * <grant.likely@secretlab.ca> so that these routines are available for + * 32 bit also. + * + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * Rework, based on alpha PCI code. + * Copyright (c) 2009 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/export.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> + +/** + * get_int_prop - Decode a u32 from a device tree property + */ +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + const __be32 *prop; + int len; + + prop = of_get_property(np, name, &len); + if (prop && len >= 4) + return of_read_number(prop, 1); + return def; +} + +/** + * pci_parse_of_flags - Parse the flags cell of a device tree PCI address + * @addr0: value of 1st cell of a device tree PCI address. + * @bridge: Set this flag if the address is from a bridge 'ranges' property + */ +unsigned int pci_parse_of_flags(u32 addr0, int bridge) +{ + unsigned int flags = 0; + + if (addr0 & 0x02000000) { + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; + if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) + flags |= IORESOURCE_MEM_64; + flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; + if (addr0 & 0x40000000) + flags |= IORESOURCE_PREFETCH + | PCI_BASE_ADDRESS_MEM_PREFETCH; + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & 0xff) == 0x30) + flags |= IORESOURCE_READONLY; + } else if (addr0 & 0x01000000) + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + if (flags) + flags |= IORESOURCE_SIZEALIGN; + return flags; +} + +/** + * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node + * @node: device tree node for the PCI device + * @dev: pci_dev structure for the device + * + * This function parses the 'assigned-addresses' property of a PCI devices' + * device tree node and writes them into the associated pci_dev structure. + */ +static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct pci_bus_region region; + struct resource *res; + const __be32 *addrs; + u32 i; + int proplen; + bool mark_unset = false; + + addrs = of_get_property(node, "assigned-addresses", &proplen); + if (!addrs || !proplen) { + addrs = of_get_property(node, "reg", &proplen); + if (!addrs || !proplen) + return; + mark_unset = true; + } + + pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(of_read_number(addrs, 1), 0); + if (!flags) + continue; + base = of_read_number(&addrs[1], 2); + size = of_read_number(&addrs[3], 2); + if (!size) + continue; + i = of_read_number(addrs, 1) & 0xff; + pr_debug(" base: %llx, size: %llx, i: %x\n", + (unsigned long long)base, + (unsigned long long)size, i); + + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->flags = flags; + if (mark_unset) + res->flags |= IORESOURCE_UNSET; + res->name = pci_name(dev); + region.start = base; + region.end = base + size - 1; + pcibios_bus_to_resource(dev->bus, res, ®ion); + } +} + +/** + * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev + * @node: device tree node pointer + * @bus: bus the device is sitting on + * @devfn: PCI function number, extracted from device tree by caller. + */ +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + const char *type; + + dev = pci_alloc_dev(bus); + if (!dev) + return NULL; + type = of_get_property(node, "device_type", NULL); + if (type == NULL) + type = ""; + + pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); + + dev->dev.of_node = of_node_get(node); + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + dev->needs_freset = 0; /* pcie fundamental reset required */ + set_pcie_port_type(dev); + + pci_dev_assign_slot(dev); + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = pci_cfg_space_size(dev); + + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + dev->revision = get_int_prop(node, "revision-id", 0); + + pr_debug(" class: 0x%x\n", dev->class); + pr_debug(" revision: 0x%x\n", dev->revision); + + dev->current_state = PCI_UNKNOWN; /* unknown power state */ + dev->error_state = pci_channel_io_normal; + dev->dma_mask = 0xffffffff; + + /* Early fixups, before probing the BARs */ + pci_fixup_device(pci_fixup_early, dev); + + if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + set_pcie_hotplug_bridge(dev); + } else if (!strcmp(type, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + /* Maybe do a default OF mapping here */ + dev->irq = 0; + } + + of_pci_parse_addrs(node, dev); + + pr_debug(" adding to system ...\n"); + + pci_device_add(dev, bus); + + return dev; +} +EXPORT_SYMBOL(of_create_pci_dev); + +/** + * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes + * @dev: pci_dev structure for the bridge + * + * of_scan_bus() calls this routine for each PCI bridge that it finds, and + * this routine in turn call of_scan_bus() recusively to scan for more child + * devices. + */ +void of_scan_pci_bridge(struct pci_dev *dev) +{ + struct device_node *node = dev->dev.of_node; + struct pci_bus *bus; + struct pci_controller *phb; + const __be32 *busrange, *ranges; + int len, i, mode; + struct pci_bus_region region; + struct resource *res; + unsigned int flags; + u64 size; + + pr_debug("of_scan_pci_bridge(%pOF)\n", node); + + /* parse bus-range property */ + busrange = of_get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %pOF\n", + node); + return; + } + ranges = of_get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %pOF\n", + node); + return; + } + + bus = pci_find_bus(pci_domain_nr(dev->bus), + of_read_number(busrange, 1)); + if (!bus) { + bus = pci_add_new_bus(dev->bus, dev, + of_read_number(busrange, 1)); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %pOF\n", + node); + return; + } + } + + bus->primary = dev->bus->number; + pci_bus_insert_busn_res(bus, of_read_number(busrange, 1), + of_read_number(busrange+1, 1)); + bus->bridge_ctl = 0; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(of_read_number(ranges, 1), 1); + size = of_read_number(&ranges[6], 2); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %pOF\n", node); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %pOF\n", node); + continue; + } + res = bus->resource[i]; + ++i; + } + res->flags = flags; + region.start = of_read_number(&ranges[1], 2); + region.end = region.start + size - 1; + pcibios_bus_to_resource(dev->bus, res, ®ion); + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + pr_debug(" bus name: %s\n", bus->name); + + phb = pci_bus_to_host(bus); + + mode = PCI_PROBE_NORMAL; + if (phb->controller_ops.probe_mode) + mode = phb->controller_ops.probe_mode(bus); + pr_debug(" probe mode: %d\n", mode); + + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +EXPORT_SYMBOL(of_scan_pci_bridge); + +static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus, + struct device_node *dn) +{ + struct pci_dev *dev = NULL; + const __be32 *reg; + int reglen, devfn; +#ifdef CONFIG_EEH + struct eeh_dev *edev = pdn_to_eeh_dev(PCI_DN(dn)); +#endif + + pr_debug(" * %pOF\n", dn); + if (!of_device_is_available(dn)) + return NULL; + + reg = of_get_property(dn, "reg", ®len); + if (reg == NULL || reglen < 20) + return NULL; + devfn = (of_read_number(reg, 1) >> 8) & 0xff; + + /* Check if the PCI device is already there */ + dev = pci_get_slot(bus, devfn); + if (dev) { + pci_dev_put(dev); + return dev; + } + + /* Device removed permanently ? */ +#ifdef CONFIG_EEH + if (edev && (edev->mode & EEH_DEV_REMOVED)) + return NULL; +#endif + + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(dn, bus, devfn); + if (!dev) + return NULL; + + pr_debug(" dev header type: %x\n", dev->hdr_type); + return dev; +} + +/** + * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * @rescan_existing: Flag indicating bus has already been set up + */ +static void __of_scan_bus(struct device_node *node, struct pci_bus *bus, + int rescan_existing) +{ + struct device_node *child; + struct pci_dev *dev; + + pr_debug("of_scan_bus(%pOF) bus no %d...\n", + node, bus->number); + + /* Scan direct children */ + for_each_child_of_node(node, child) { + dev = of_scan_pci_dev(bus, child); + if (!dev) + continue; + pr_debug(" dev header type: %x\n", dev->hdr_type); + } + + /* Apply all fixups necessary. We don't fixup the bus "self" + * for an existing bridge that is being rescanned + */ + if (!rescan_existing) + pcibios_setup_bus_self(bus); + pcibios_setup_bus_devices(bus); + + /* Now scan child busses */ + for_each_pci_bridge(dev, bus) + of_scan_pci_bridge(dev); +} + +/** + * of_scan_bus - given a PCI bus node, setup bus and scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + */ +void of_scan_bus(struct device_node *node, struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 0); +} +EXPORT_SYMBOL_GPL(of_scan_bus); + +/** + * of_rescan_bus - given a PCI bus node, scan for child devices + * @node: device tree node for the PCI bus + * @bus: pci_bus structure for the PCI bus + * + * Same as of_scan_bus, but for a pci_bus structure that has already been + * setup. + */ +void of_rescan_bus(struct device_node *node, struct pci_bus *bus) +{ + __of_scan_bus(node, bus, 1); +} +EXPORT_SYMBOL_GPL(of_rescan_bus); + |