diff options
Diffstat (limited to 'arch/powerpc/platforms/83xx/km83xx.c')
| -rw-r--r-- | arch/powerpc/platforms/83xx/km83xx.c | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c new file mode 100644 index 000000000..d8642a4af --- /dev/null +++ b/arch/powerpc/platforms/83xx/km83xx.c @@ -0,0 +1,191 @@ +/* + * Copyright 2008-2011 DENX Software Engineering GmbH + * Author: Heiko Schocher <hs@denx.de> + * + * Description: + * Keymile 83xx platform specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> + +#include <linux/atomic.h> +#include <linux/time.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <soc/fsl/qe/qe.h> +#include <soc/fsl/qe/qe_ic.h> + +#include "mpc83xx.h" + +#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ + +static void quirk_mpc8360e_qe_enet10(void) +{ + /* + * handle mpc8360E Erratum QE_ENET10: + * RGMII AC values do not meet the specification + */ + uint svid = mfspr(SPRN_SVR); + struct device_node *np_par; + struct resource res; + void __iomem *base; + int ret; + + np_par = of_find_node_by_name(NULL, "par_io"); + if (np_par == NULL) { + pr_warn("%s couldn;t find par_io node\n", __func__); + return; + } + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np_par, 0, &res); + if (ret) { + pr_warn("%s couldn;t map par_io registers\n", __func__); + return; + } + + base = ioremap(res.start, res.end - res.start + 1); + + /* + * set output delay adjustments to default values according + * table 5 in Errata Rev. 5, 9/2011: + * + * write 0b01 to UCC1 bits 18:19 + * write 0b01 to UCC2 option 1 bits 4:5 + * write 0b01 to UCC2 option 2 bits 16:17 + */ + clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); + + /* + * set output delay adjustments to default values according + * table 3-13 in Reference Manual Rev.3 05/2010: + * + * write 0b01 to UCC2 option 2 bits 16:17 + * write 0b0101 to UCC1 bits 20:23 + * write 0b0101 to UCC2 option 1 bits 24:27 + */ + clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); + + if (SVR_REV(svid) == 0x0021) { + /* + * UCC2 option 1: write 0b1010 to bits 24:27 + * at address IMMRBAR+0x14AC + */ + clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); + } else if (SVR_REV(svid) == 0x0020) { + /* + * UCC1: write 0b11 to bits 18:19 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x00003000); + + /* + * UCC2 option 1: write 0b11 to bits 4:5 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x0c000000); + + /* + * UCC2 option 2: write 0b11 to bits 16:17 + * at address IMMRBAR+0x14AC + */ + setbits32((base + 0xac), 0x0000c000); + } + iounmap(base); + of_node_put(np_par); +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc83xx_km_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpc83xx_setup_arch(); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_name(NULL, "par_io"); + if (np != NULL) { + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(np, "spi") + par_io_of_config(np); + + for_each_node_by_name(np, "ucc") + par_io_of_config(np); + + /* Only apply this quirk when par_io is available */ + np = of_find_compatible_node(NULL, "network", "ucc_geth"); + if (np != NULL) { + quirk_mpc8360e_qe_enet10(); + of_node_put(np); + } + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices); + +/* list of the supported boards */ +static char *board[] __initdata = { + "Keymile,KMETER1", + "Keymile,kmpbec8321", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc83xx_km_probe(void) +{ + int i = 0; + + while (board[i]) { + if (of_machine_is_compatible(board[i])) + break; + i++; + } + return (board[i] != NULL); +} + +define_machine(mpc83xx_km) { + .name = "mpc83xx-km-platform", + .probe = mpc83xx_km_probe, + .setup_arch = mpc83xx_km_setup_arch, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; |