summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/powernv/smp.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--arch/powerpc/platforms/powernv/smp.c442
1 files changed, 442 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
new file mode 100644
index 000000000..889c3dbec
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -0,0 +1,442 @@
+/*
+ * SMP support for PowerNV machines.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/sched/hotplug.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+
+#include <asm/irq.h>
+#include <asm/smp.h>
+#include <asm/paca.h>
+#include <asm/machdep.h>
+#include <asm/cputable.h>
+#include <asm/firmware.h>
+#include <asm/vdso_datapage.h>
+#include <asm/cputhreads.h>
+#include <asm/xics.h>
+#include <asm/xive.h>
+#include <asm/opal.h>
+#include <asm/runlatch.h>
+#include <asm/code-patching.h>
+#include <asm/dbell.h>
+#include <asm/kvm_ppc.h>
+#include <asm/ppc-opcode.h>
+#include <asm/cpuidle.h>
+#include <asm/kexec.h>
+#include <asm/reg.h>
+#include <asm/powernv.h>
+
+#include "powernv.h"
+
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...) do { } while (0)
+#endif
+
+static void pnv_smp_setup_cpu(int cpu)
+{
+ /*
+ * P9 workaround for CI vector load (see traps.c),
+ * enable the corresponding HMI interrupt
+ */
+ if (pvr_version_is(PVR_POWER9))
+ mtspr(SPRN_HMEER, mfspr(SPRN_HMEER) | PPC_BIT(17));
+
+ if (xive_enabled())
+ xive_smp_setup_cpu();
+ else if (cpu != boot_cpuid)
+ xics_setup_cpu();
+}
+
+static int pnv_smp_kick_cpu(int nr)
+{
+ unsigned int pcpu;
+ unsigned long start_here =
+ __pa(ppc_function_entry(generic_secondary_smp_init));
+ long rc;
+ uint8_t status;
+
+ if (nr < 0 || nr >= nr_cpu_ids)
+ return -EINVAL;
+
+ pcpu = get_hard_smp_processor_id(nr);
+ /*
+ * If we already started or OPAL is not supported, we just
+ * kick the CPU via the PACA
+ */
+ if (paca_ptrs[nr]->cpu_start || !firmware_has_feature(FW_FEATURE_OPAL))
+ goto kick;
+
+ /*
+ * At this point, the CPU can either be spinning on the way in
+ * from kexec or be inside OPAL waiting to be started for the
+ * first time. OPAL v3 allows us to query OPAL to know if it
+ * has the CPUs, so we do that
+ */
+ rc = opal_query_cpu_status(pcpu, &status);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr);
+ return -ENODEV;
+ }
+
+ /*
+ * Already started, just kick it, probably coming from
+ * kexec and spinning
+ */
+ if (status == OPAL_THREAD_STARTED)
+ goto kick;
+
+ /*
+ * Available/inactive, let's kick it
+ */
+ if (status == OPAL_THREAD_INACTIVE) {
+ pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
+ rc = opal_start_cpu(pcpu, start_here);
+ if (rc != OPAL_SUCCESS) {
+ pr_warn("OPAL Error %ld starting CPU %d\n", rc, nr);
+ return -ENODEV;
+ }
+ } else {
+ /*
+ * An unavailable CPU (or any other unknown status)
+ * shouldn't be started. It should also
+ * not be in the possible map but currently it can
+ * happen
+ */
+ pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable"
+ " (status %d)...\n", nr, pcpu, status);
+ return -ENODEV;
+ }
+
+kick:
+ return smp_generic_kick_cpu(nr);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int pnv_smp_cpu_disable(void)
+{
+ int cpu = smp_processor_id();
+
+ /* This is identical to pSeries... might consolidate by
+ * moving migrate_irqs_away to a ppc_md with default to
+ * the generic fixup_irqs. --BenH.
+ */
+ set_cpu_online(cpu, false);
+ vdso_data->processorCount--;
+ if (cpu == boot_cpuid)
+ boot_cpuid = cpumask_any(cpu_online_mask);
+ if (xive_enabled())
+ xive_smp_disable_cpu();
+ else
+ xics_migrate_irqs_away();
+ return 0;
+}
+
+static void pnv_flush_interrupts(void)
+{
+ if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+ if (xive_enabled())
+ xive_flush_interrupt();
+ else
+ icp_opal_flush_interrupt();
+ } else {
+ icp_native_flush_interrupt();
+ }
+}
+
+static void pnv_smp_cpu_kill_self(void)
+{
+ unsigned long srr1, unexpected_mask, wmask;
+ unsigned int cpu;
+ u64 lpcr_val;
+
+ /* Standard hot unplug procedure */
+
+ idle_task_exit();
+ cpu = smp_processor_id();
+ DBG("CPU%d offline\n", cpu);
+ generic_set_cpu_dead(cpu);
+ smp_wmb();
+
+ wmask = SRR1_WAKEMASK;
+ if (cpu_has_feature(CPU_FTR_ARCH_207S))
+ wmask = SRR1_WAKEMASK_P8;
+
+ /*
+ * This turns the irq soft-disabled state we're called with, into a
+ * hard-disabled state with pending irq_happened interrupts cleared.
+ *
+ * PACA_IRQ_DEC - Decrementer should be ignored.
+ * PACA_IRQ_HMI - Can be ignored, processing is done in real mode.
+ * PACA_IRQ_DBELL, EE, PMI - Unexpected.
+ */
+ hard_irq_disable();
+ if (generic_check_cpu_restart(cpu))
+ goto out;
+
+ unexpected_mask = ~(PACA_IRQ_DEC | PACA_IRQ_HMI | PACA_IRQ_HARD_DIS);
+ if (local_paca->irq_happened & unexpected_mask) {
+ if (local_paca->irq_happened & PACA_IRQ_EE)
+ pnv_flush_interrupts();
+ DBG("CPU%d Unexpected exit while offline irq_happened=%lx!\n",
+ cpu, local_paca->irq_happened);
+ }
+ local_paca->irq_happened = PACA_IRQ_HARD_DIS;
+
+ /*
+ * We don't want to take decrementer interrupts while we are
+ * offline, so clear LPCR:PECE1. We keep PECE2 (and
+ * LPCR_PECE_HVEE on P9) enabled so as to let IPIs in.
+ *
+ * If the CPU gets woken up by a special wakeup, ensure that
+ * the SLW engine sets LPCR with decrementer bit cleared, else
+ * the CPU will come back to the kernel due to a spurious
+ * wakeup.
+ */
+ lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
+ pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
+
+ while (!generic_check_cpu_restart(cpu)) {
+ /*
+ * Clear IPI flag, since we don't handle IPIs while
+ * offline, except for those when changing micro-threading
+ * mode, which are handled explicitly below, and those
+ * for coming online, which are handled via
+ * generic_check_cpu_restart() calls.
+ */
+ kvmppc_clear_host_ipi(cpu);
+
+ srr1 = pnv_cpu_offline(cpu);
+
+ WARN_ON_ONCE(!irqs_disabled());
+ WARN_ON(lazy_irq_pending());
+
+ /*
+ * If the SRR1 value indicates that we woke up due to
+ * an external interrupt, then clear the interrupt.
+ * We clear the interrupt before checking for the
+ * reason, so as to avoid a race where we wake up for
+ * some other reason, find nothing and clear the interrupt
+ * just as some other cpu is sending us an interrupt.
+ * If we returned from power7_nap as a result of
+ * having finished executing in a KVM guest, then srr1
+ * contains 0.
+ */
+ if (((srr1 & wmask) == SRR1_WAKEEE) ||
+ ((srr1 & wmask) == SRR1_WAKEHVI)) {
+ pnv_flush_interrupts();
+ } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
+ unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
+ asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
+ } else if ((srr1 & wmask) == SRR1_WAKERESET) {
+ irq_set_pending_from_srr1(srr1);
+ /* Does not return */
+ }
+
+ smp_mb();
+
+ /*
+ * For kdump kernels, we process the ipi and jump to
+ * crash_ipi_callback
+ */
+ if (kdump_in_progress()) {
+ /*
+ * If we got to this point, we've not used
+ * NMI's, otherwise we would have gone
+ * via the SRR1_WAKERESET path. We are
+ * using regular IPI's for waking up offline
+ * threads.
+ */
+ struct pt_regs regs;
+
+ ppc_save_regs(&regs);
+ crash_ipi_callback(&regs);
+ /* Does not return */
+ }
+
+ if (cpu_core_split_required())
+ continue;
+
+ if (srr1 && !generic_check_cpu_restart(cpu))
+ DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
+ cpu, srr1);
+
+ }
+
+ /*
+ * Re-enable decrementer interrupts in LPCR.
+ *
+ * Further, we want stop states to be woken up by decrementer
+ * for non-hotplug cases. So program the LPCR via stop api as
+ * well.
+ */
+ lpcr_val = mfspr(SPRN_LPCR) | (u64)LPCR_PECE1;
+ pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
+out:
+ DBG("CPU%d coming online...\n", cpu);
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static int pnv_cpu_bootable(unsigned int nr)
+{
+ /*
+ * Starting with POWER8, the subcore logic relies on all threads of a
+ * core being booted so that they can participate in split mode
+ * switches. So on those machines we ignore the smt_enabled_at_boot
+ * setting (smt-enabled on the kernel command line).
+ */
+ if (cpu_has_feature(CPU_FTR_ARCH_207S))
+ return 1;
+
+ return smp_generic_cpu_bootable(nr);
+}
+
+static int pnv_smp_prepare_cpu(int cpu)
+{
+ if (xive_enabled())
+ return xive_smp_prepare_cpu(cpu);
+ return 0;
+}
+
+/* Cause IPI as setup by the interrupt controller (xics or xive) */
+static void (*ic_cause_ipi)(int cpu);
+
+static void pnv_cause_ipi(int cpu)
+{
+ if (doorbell_try_core_ipi(cpu))
+ return;
+
+ ic_cause_ipi(cpu);
+}
+
+static void __init pnv_smp_probe(void)
+{
+ if (xive_enabled())
+ xive_smp_probe();
+ else
+ xics_smp_probe();
+
+ if (cpu_has_feature(CPU_FTR_DBELL)) {
+ ic_cause_ipi = smp_ops->cause_ipi;
+ WARN_ON(!ic_cause_ipi);
+
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ smp_ops->cause_ipi = doorbell_global_ipi;
+ else
+ smp_ops->cause_ipi = pnv_cause_ipi;
+ }
+}
+
+static int pnv_system_reset_exception(struct pt_regs *regs)
+{
+ if (smp_handle_nmi_ipi(regs))
+ return 1;
+ return 0;
+}
+
+static int pnv_cause_nmi_ipi(int cpu)
+{
+ int64_t rc;
+
+ if (cpu >= 0) {
+ int h = get_hard_smp_processor_id(cpu);
+
+ if (opal_check_token(OPAL_QUIESCE))
+ opal_quiesce(QUIESCE_HOLD, h);
+
+ rc = opal_signal_system_reset(h);
+
+ if (opal_check_token(OPAL_QUIESCE))
+ opal_quiesce(QUIESCE_RESUME, h);
+
+ if (rc != OPAL_SUCCESS)
+ return 0;
+ return 1;
+
+ } else if (cpu == NMI_IPI_ALL_OTHERS) {
+ bool success = true;
+ int c;
+
+ if (opal_check_token(OPAL_QUIESCE))
+ opal_quiesce(QUIESCE_HOLD, -1);
+
+ /*
+ * We do not use broadcasts (yet), because it's not clear
+ * exactly what semantics Linux wants or the firmware should
+ * provide.
+ */
+ for_each_online_cpu(c) {
+ if (c == smp_processor_id())
+ continue;
+
+ rc = opal_signal_system_reset(
+ get_hard_smp_processor_id(c));
+ if (rc != OPAL_SUCCESS)
+ success = false;
+ }
+
+ if (opal_check_token(OPAL_QUIESCE))
+ opal_quiesce(QUIESCE_RESUME, -1);
+
+ if (success)
+ return 1;
+
+ /*
+ * Caller will fall back to doorbells, which may pick
+ * up the remainders.
+ */
+ }
+
+ return 0;
+}
+
+static struct smp_ops_t pnv_smp_ops = {
+ .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */
+ .cause_ipi = NULL, /* Filled at runtime by pnv_smp_probe() */
+ .cause_nmi_ipi = NULL,
+ .probe = pnv_smp_probe,
+ .prepare_cpu = pnv_smp_prepare_cpu,
+ .kick_cpu = pnv_smp_kick_cpu,
+ .setup_cpu = pnv_smp_setup_cpu,
+ .cpu_bootable = pnv_cpu_bootable,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = pnv_smp_cpu_disable,
+ .cpu_die = generic_cpu_die,
+#endif /* CONFIG_HOTPLUG_CPU */
+};
+
+/* This is called very early during platform setup_arch */
+void __init pnv_smp_init(void)
+{
+ if (opal_check_token(OPAL_SIGNAL_SYSTEM_RESET)) {
+ ppc_md.system_reset_exception = pnv_system_reset_exception;
+ pnv_smp_ops.cause_nmi_ipi = pnv_cause_nmi_ipi;
+ }
+ smp_ops = &pnv_smp_ops;
+
+#ifdef CONFIG_HOTPLUG_CPU
+ ppc_md.cpu_die = pnv_smp_cpu_kill_self;
+#ifdef CONFIG_KEXEC_CORE
+ crash_wake_offline = 1;
+#endif
+#endif
+}