diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/powerpc/sysdev/fsl_pci.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h new file mode 100644 index 000000000..151588530 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -0,0 +1,140 @@ +/* + * MPC85xx/86xx PCI Express structure define + * + * Copyright 2007,2011 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __POWERPC_FSL_PCI_H +#define __POWERPC_FSL_PCI_H + +struct platform_device; + + +/* FSL PCI controller BRR1 register */ +#define PCI_FSL_BRR1 0xbf8 +#define PCI_FSL_BRR1_VER 0xffff + +#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */ +#define PCIE_LTSSM_L0 0x16 /* L0 state */ +#define PCIE_IP_REV_2_2 0x02080202 /* PCIE IP block version Rev2.2 */ +#define PCIE_IP_REV_3_0 0x02080300 /* PCIE IP block version Rev3.0 */ +#define PIWAR_EN 0x80000000 /* Enable */ +#define PIWAR_PF 0x20000000 /* prefetch */ +#define PIWAR_TGI_LOCAL 0x00f00000 /* target - local memory */ +#define PIWAR_READ_SNOOP 0x00050000 +#define PIWAR_WRITE_SNOOP 0x00005000 +#define PIWAR_SZ_MASK 0x0000003f + +#define PEX_PMCR_PTOMR 0x1 +#define PEX_PMCR_EXL2S 0x2 + +#define PME_DISR_EN_PTOD 0x00008000 +#define PME_DISR_EN_ENL23D 0x00002000 +#define PME_DISR_EN_EXL23D 0x00001000 + +/* PCI/PCI Express outbound window reg */ +struct pci_outbound_window_regs { + __be32 potar; /* 0x.0 - Outbound translation address register */ + __be32 potear; /* 0x.4 - Outbound translation extended address register */ + __be32 powbar; /* 0x.8 - Outbound window base address register */ + u8 res1[4]; + __be32 powar; /* 0x.10 - Outbound window attributes register */ + u8 res2[12]; +}; + +/* PCI/PCI Express inbound window reg */ +struct pci_inbound_window_regs { + __be32 pitar; /* 0x.0 - Inbound translation address register */ + u8 res1[4]; + __be32 piwbar; /* 0x.8 - Inbound window base address register */ + __be32 piwbear; /* 0x.c - Inbound window base extended address register */ + __be32 piwar; /* 0x.10 - Inbound window attributes register */ + u8 res2[12]; +}; + +/* PCI/PCI Express IO block registers for 85xx/86xx */ +struct ccsr_pci { + __be32 config_addr; /* 0x.000 - PCI/PCIE Configuration Address Register */ + __be32 config_data; /* 0x.004 - PCI/PCIE Configuration Data Register */ + __be32 int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */ + __be32 pex_otb_cpl_tor; /* 0x.00c - PCIE Outbound completion timeout register */ + __be32 pex_conf_tor; /* 0x.010 - PCIE configuration timeout register */ + __be32 pex_config; /* 0x.014 - PCIE CONFIG Register */ + __be32 pex_int_status; /* 0x.018 - PCIE interrupt status */ + u8 res2[4]; + __be32 pex_pme_mes_dr; /* 0x.020 - PCIE PME and message detect register */ + __be32 pex_pme_mes_disr; /* 0x.024 - PCIE PME and message disable register */ + __be32 pex_pme_mes_ier; /* 0x.028 - PCIE PME and message interrupt enable register */ + __be32 pex_pmcr; /* 0x.02c - PCIE power management command register */ + u8 res3[3016]; + __be32 block_rev1; /* 0x.bf8 - PCIE Block Revision register 1 */ + __be32 block_rev2; /* 0x.bfc - PCIE Block Revision register 2 */ + +/* PCI/PCI Express outbound window 0-4 + * Window 0 is the default window and is the only window enabled upon reset. + * The default outbound register set is used when a transaction misses + * in all of the other outbound windows. + */ + struct pci_outbound_window_regs pow[5]; + u8 res14[96]; + struct pci_inbound_window_regs pmit; /* 0xd00 - 0xd9c Inbound MSI */ + u8 res6[96]; +/* PCI/PCI Express inbound window 3-0 + * inbound window 1 supports only a 32-bit base address and does not + * define an inbound window base extended address register. + */ + struct pci_inbound_window_regs piw[4]; + + __be32 pex_err_dr; /* 0x.e00 - PCI/PCIE error detect register */ + u8 res21[4]; + __be32 pex_err_en; /* 0x.e08 - PCI/PCIE error interrupt enable register */ + u8 res22[4]; + __be32 pex_err_disr; /* 0x.e10 - PCI/PCIE error disable register */ + u8 res23[12]; + __be32 pex_err_cap_stat; /* 0x.e20 - PCI/PCIE error capture status register */ + u8 res24[4]; + __be32 pex_err_cap_r0; /* 0x.e28 - PCIE error capture register 0 */ + __be32 pex_err_cap_r1; /* 0x.e2c - PCIE error capture register 0 */ + __be32 pex_err_cap_r2; /* 0x.e30 - PCIE error capture register 0 */ + __be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */ + u8 res_e38[200]; + __be32 pdb_stat; /* 0x.f00 - PCIE Debug Status */ + u8 res_f04[16]; + __be32 pex_csr0; /* 0x.f14 - PEX Control/Status register 0*/ +#define PEX_CSR0_LTSSM_MASK 0xFC +#define PEX_CSR0_LTSSM_SHIFT 2 +#define PEX_CSR0_LTSSM_L0 0x11 + __be32 pex_csr1; /* 0x.f18 - PEX Control/Status register 1*/ + u8 res_f1c[228]; + +}; + +extern int fsl_add_bridge(struct platform_device *pdev, int is_primary); +extern void fsl_pcibios_fixup_bus(struct pci_bus *bus); +extern void fsl_pcibios_fixup_phb(struct pci_controller *phb); +extern int mpc83xx_add_bridge(struct device_node *dev); +u64 fsl_pci_immrbar_base(struct pci_controller *hose); + +extern struct device_node *fsl_pci_primary; + +#ifdef CONFIG_PCI +void fsl_pci_assign_primary(void); +#else +static inline void fsl_pci_assign_primary(void) {} +#endif + +#ifdef CONFIG_FSL_PCI +extern int fsl_pci_mcheck_exception(struct pt_regs *); +#else +static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; } +#endif + +#endif /* __POWERPC_FSL_PCI_H */ +#endif /* __KERNEL__ */ |