diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/x86/kernel/fpu/xstate.c | 1294 |
1 files changed, 1294 insertions, 0 deletions
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c new file mode 100644 index 000000000..7d372db8b --- /dev/null +++ b/arch/x86/kernel/fpu/xstate.c @@ -0,0 +1,1294 @@ +/* + * xsave/xrstor support. + * + * Author: Suresh Siddha <suresh.b.siddha@intel.com> + */ +#include <linux/compat.h> +#include <linux/cpu.h> +#include <linux/mman.h> +#include <linux/pkeys.h> + +#include <asm/fpu/api.h> +#include <asm/fpu/internal.h> +#include <asm/fpu/signal.h> +#include <asm/fpu/regset.h> +#include <asm/fpu/xstate.h> + +#include <asm/tlbflush.h> +#include <asm/cpufeature.h> + +/* + * Although we spell it out in here, the Processor Trace + * xfeature is completely unused. We use other mechanisms + * to save/restore PT state in Linux. + */ +static const char *xfeature_names[] = +{ + "x87 floating point registers" , + "SSE registers" , + "AVX registers" , + "MPX bounds registers" , + "MPX CSR" , + "AVX-512 opmask" , + "AVX-512 Hi256" , + "AVX-512 ZMM_Hi256" , + "Processor Trace (unused)" , + "Protection Keys User registers", + "unknown xstate feature" , +}; + +static short xsave_cpuid_features[] __initdata = { + X86_FEATURE_FPU, + X86_FEATURE_XMM, + X86_FEATURE_AVX, + X86_FEATURE_MPX, + X86_FEATURE_MPX, + X86_FEATURE_AVX512F, + X86_FEATURE_AVX512F, + X86_FEATURE_AVX512F, + X86_FEATURE_INTEL_PT, + X86_FEATURE_PKU, +}; + +/* + * Mask of xstate features supported by the CPU and the kernel: + */ +u64 xfeatures_mask __read_mostly; + +static unsigned int xstate_offsets[XFEATURE_MAX] = { [ 0 ... XFEATURE_MAX - 1] = -1}; +static unsigned int xstate_sizes[XFEATURE_MAX] = { [ 0 ... XFEATURE_MAX - 1] = -1}; +static unsigned int xstate_comp_offsets[sizeof(xfeatures_mask)*8]; + +/* + * The XSAVE area of kernel can be in standard or compacted format; + * it is always in standard format for user mode. This is the user + * mode standard format size used for signal and ptrace frames. + */ +unsigned int fpu_user_xstate_size; + +/* + * Clear all of the X86_FEATURE_* bits that are unavailable + * when the CPU has no XSAVE support. + */ +void fpu__xstate_clear_all_cpu_caps(void) +{ + setup_clear_cpu_cap(X86_FEATURE_XSAVE); +} + +/* + * Return whether the system supports a given xfeature. + * + * Also return the name of the (most advanced) feature that the caller requested: + */ +int cpu_has_xfeatures(u64 xfeatures_needed, const char **feature_name) +{ + u64 xfeatures_missing = xfeatures_needed & ~xfeatures_mask; + + if (unlikely(feature_name)) { + long xfeature_idx, max_idx; + u64 xfeatures_print; + /* + * So we use FLS here to be able to print the most advanced + * feature that was requested but is missing. So if a driver + * asks about "XFEATURE_MASK_SSE | XFEATURE_MASK_YMM" we'll print the + * missing AVX feature - this is the most informative message + * to users: + */ + if (xfeatures_missing) + xfeatures_print = xfeatures_missing; + else + xfeatures_print = xfeatures_needed; + + xfeature_idx = fls64(xfeatures_print)-1; + max_idx = ARRAY_SIZE(xfeature_names)-1; + xfeature_idx = min(xfeature_idx, max_idx); + + *feature_name = xfeature_names[xfeature_idx]; + } + + if (xfeatures_missing) + return 0; + + return 1; +} +EXPORT_SYMBOL_GPL(cpu_has_xfeatures); + +static int xfeature_is_supervisor(int xfeature_nr) +{ + /* + * We currently do not support supervisor states, but if + * we did, we could find out like this. + * + * SDM says: If state component 'i' is a user state component, + * ECX[0] return 0; if state component i is a supervisor + * state component, ECX[0] returns 1. + */ + u32 eax, ebx, ecx, edx; + + cpuid_count(XSTATE_CPUID, xfeature_nr, &eax, &ebx, &ecx, &edx); + return !!(ecx & 1); +} + +static int xfeature_is_user(int xfeature_nr) +{ + return !xfeature_is_supervisor(xfeature_nr); +} + +/* + * When executing XSAVEOPT (or other optimized XSAVE instructions), if + * a processor implementation detects that an FPU state component is still + * (or is again) in its initialized state, it may clear the corresponding + * bit in the header.xfeatures field, and can skip the writeout of registers + * to the corresponding memory layout. + * + * This means that when the bit is zero, the state component might still contain + * some previous - non-initialized register state. + * + * Before writing xstate information to user-space we sanitize those components, + * to always ensure that the memory layout of a feature will be in the init state + * if the corresponding header bit is zero. This is to ensure that user-space doesn't + * see some stale state in the memory layout during signal handling, debugging etc. + */ +void fpstate_sanitize_xstate(struct fpu *fpu) +{ + struct fxregs_state *fx = &fpu->state.fxsave; + int feature_bit; + u64 xfeatures; + + if (!use_xsaveopt()) + return; + + xfeatures = fpu->state.xsave.header.xfeatures; + + /* + * None of the feature bits are in init state. So nothing else + * to do for us, as the memory layout is up to date. + */ + if ((xfeatures & xfeatures_mask) == xfeatures_mask) + return; + + /* + * FP is in init state + */ + if (!(xfeatures & XFEATURE_MASK_FP)) { + fx->cwd = 0x37f; + fx->swd = 0; + fx->twd = 0; + fx->fop = 0; + fx->rip = 0; + fx->rdp = 0; + memset(&fx->st_space[0], 0, 128); + } + + /* + * SSE is in init state + */ + if (!(xfeatures & XFEATURE_MASK_SSE)) + memset(&fx->xmm_space[0], 0, 256); + + /* + * First two features are FPU and SSE, which above we handled + * in a special way already: + */ + feature_bit = 0x2; + xfeatures = (xfeatures_mask & ~xfeatures) >> 2; + + /* + * Update all the remaining memory layouts according to their + * standard xstate layout, if their header bit is in the init + * state: + */ + while (xfeatures) { + if (xfeatures & 0x1) { + int offset = xstate_comp_offsets[feature_bit]; + int size = xstate_sizes[feature_bit]; + + memcpy((void *)fx + offset, + (void *)&init_fpstate.xsave + offset, + size); + } + + xfeatures >>= 1; + feature_bit++; + } +} + +/* + * Enable the extended processor state save/restore feature. + * Called once per CPU onlining. + */ +void fpu__init_cpu_xstate(void) +{ + if (!boot_cpu_has(X86_FEATURE_XSAVE) || !xfeatures_mask) + return; + /* + * Make it clear that XSAVES supervisor states are not yet + * implemented should anyone expect it to work by changing + * bits in XFEATURE_MASK_* macros and XCR0. + */ + WARN_ONCE((xfeatures_mask & XFEATURE_MASK_SUPERVISOR), + "x86/fpu: XSAVES supervisor states are not yet implemented.\n"); + + xfeatures_mask &= ~XFEATURE_MASK_SUPERVISOR; + + cr4_set_bits(X86_CR4_OSXSAVE); + xsetbv(XCR_XFEATURE_ENABLED_MASK, xfeatures_mask); +} + +/* + * Note that in the future we will likely need a pair of + * functions here: one for user xstates and the other for + * system xstates. For now, they are the same. + */ +static int xfeature_enabled(enum xfeature xfeature) +{ + return !!(xfeatures_mask & (1UL << xfeature)); +} + +/* + * Record the offsets and sizes of various xstates contained + * in the XSAVE state memory layout. + */ +static void __init setup_xstate_features(void) +{ + u32 eax, ebx, ecx, edx, i; + /* start at the beginnning of the "extended state" */ + unsigned int last_good_offset = offsetof(struct xregs_state, + extended_state_area); + /* + * The FP xstates and SSE xstates are legacy states. They are always + * in the fixed offsets in the xsave area in either compacted form + * or standard form. + */ + xstate_offsets[0] = 0; + xstate_sizes[0] = offsetof(struct fxregs_state, xmm_space); + xstate_offsets[1] = xstate_sizes[0]; + xstate_sizes[1] = FIELD_SIZEOF(struct fxregs_state, xmm_space); + + for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) { + if (!xfeature_enabled(i)) + continue; + + cpuid_count(XSTATE_CPUID, i, &eax, &ebx, &ecx, &edx); + + /* + * If an xfeature is supervisor state, the offset + * in EBX is invalid. We leave it to -1. + */ + if (xfeature_is_user(i)) + xstate_offsets[i] = ebx; + + xstate_sizes[i] = eax; + /* + * In our xstate size checks, we assume that the + * highest-numbered xstate feature has the + * highest offset in the buffer. Ensure it does. + */ + WARN_ONCE(last_good_offset > xstate_offsets[i], + "x86/fpu: misordered xstate at %d\n", last_good_offset); + last_good_offset = xstate_offsets[i]; + } +} + +static void __init print_xstate_feature(u64 xstate_mask) +{ + const char *feature_name; + + if (cpu_has_xfeatures(xstate_mask, &feature_name)) + pr_info("x86/fpu: Supporting XSAVE feature 0x%03Lx: '%s'\n", xstate_mask, feature_name); +} + +/* + * Print out all the supported xstate features: + */ +static void __init print_xstate_features(void) +{ + print_xstate_feature(XFEATURE_MASK_FP); + print_xstate_feature(XFEATURE_MASK_SSE); + print_xstate_feature(XFEATURE_MASK_YMM); + print_xstate_feature(XFEATURE_MASK_BNDREGS); + print_xstate_feature(XFEATURE_MASK_BNDCSR); + print_xstate_feature(XFEATURE_MASK_OPMASK); + print_xstate_feature(XFEATURE_MASK_ZMM_Hi256); + print_xstate_feature(XFEATURE_MASK_Hi16_ZMM); + print_xstate_feature(XFEATURE_MASK_PKRU); +} + +/* + * This check is important because it is easy to get XSTATE_* + * confused with XSTATE_BIT_*. + */ +#define CHECK_XFEATURE(nr) do { \ + WARN_ON(nr < FIRST_EXTENDED_XFEATURE); \ + WARN_ON(nr >= XFEATURE_MAX); \ +} while (0) + +/* + * We could cache this like xstate_size[], but we only use + * it here, so it would be a waste of space. + */ +static int xfeature_is_aligned(int xfeature_nr) +{ + u32 eax, ebx, ecx, edx; + + CHECK_XFEATURE(xfeature_nr); + cpuid_count(XSTATE_CPUID, xfeature_nr, &eax, &ebx, &ecx, &edx); + /* + * The value returned by ECX[1] indicates the alignment + * of state component 'i' when the compacted format + * of the extended region of an XSAVE area is used: + */ + return !!(ecx & 2); +} + +/* + * This function sets up offsets and sizes of all extended states in + * xsave area. This supports both standard format and compacted format + * of the xsave aread. + */ +static void __init setup_xstate_comp(void) +{ + unsigned int xstate_comp_sizes[sizeof(xfeatures_mask)*8]; + int i; + + /* + * The FP xstates and SSE xstates are legacy states. They are always + * in the fixed offsets in the xsave area in either compacted form + * or standard form. + */ + xstate_comp_offsets[0] = 0; + xstate_comp_offsets[1] = offsetof(struct fxregs_state, xmm_space); + + if (!boot_cpu_has(X86_FEATURE_XSAVES)) { + for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) { + if (xfeature_enabled(i)) { + xstate_comp_offsets[i] = xstate_offsets[i]; + xstate_comp_sizes[i] = xstate_sizes[i]; + } + } + return; + } + + xstate_comp_offsets[FIRST_EXTENDED_XFEATURE] = + FXSAVE_SIZE + XSAVE_HDR_SIZE; + + for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) { + if (xfeature_enabled(i)) + xstate_comp_sizes[i] = xstate_sizes[i]; + else + xstate_comp_sizes[i] = 0; + + if (i > FIRST_EXTENDED_XFEATURE) { + xstate_comp_offsets[i] = xstate_comp_offsets[i-1] + + xstate_comp_sizes[i-1]; + + if (xfeature_is_aligned(i)) + xstate_comp_offsets[i] = + ALIGN(xstate_comp_offsets[i], 64); + } + } +} + +/* + * Print out xstate component offsets and sizes + */ +static void __init print_xstate_offset_size(void) +{ + int i; + + for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) { + if (!xfeature_enabled(i)) + continue; + pr_info("x86/fpu: xstate_offset[%d]: %4d, xstate_sizes[%d]: %4d\n", + i, xstate_comp_offsets[i], i, xstate_sizes[i]); + } +} + +/* + * All supported features have either init state all zeros or are + * handled in setup_init_fpu() individually. This is an explicit + * feature list and does not use XFEATURE_MASK*SUPPORTED to catch + * newly added supported features at build time and make people + * actually look at the init state for the new feature. + */ +#define XFEATURES_INIT_FPSTATE_HANDLED \ + (XFEATURE_MASK_FP | \ + XFEATURE_MASK_SSE | \ + XFEATURE_MASK_YMM | \ + XFEATURE_MASK_OPMASK | \ + XFEATURE_MASK_ZMM_Hi256 | \ + XFEATURE_MASK_Hi16_ZMM | \ + XFEATURE_MASK_PKRU | \ + XFEATURE_MASK_BNDREGS | \ + XFEATURE_MASK_BNDCSR) + +/* + * setup the xstate image representing the init state + */ +static void __init setup_init_fpu_buf(void) +{ + static int on_boot_cpu __initdata = 1; + + BUILD_BUG_ON(XCNTXT_MASK != XFEATURES_INIT_FPSTATE_HANDLED); + + WARN_ON_FPU(!on_boot_cpu); + on_boot_cpu = 0; + + if (!boot_cpu_has(X86_FEATURE_XSAVE)) + return; + + setup_xstate_features(); + print_xstate_features(); + + if (boot_cpu_has(X86_FEATURE_XSAVES)) + init_fpstate.xsave.header.xcomp_bv = (u64)1 << 63 | xfeatures_mask; + + /* + * Init all the features state with header.xfeatures being 0x0 + */ + copy_kernel_to_xregs_booting(&init_fpstate.xsave); + + /* + * All components are now in init state. Read the state back so + * that init_fpstate contains all non-zero init state. This only + * works with XSAVE, but not with XSAVEOPT and XSAVES because + * those use the init optimization which skips writing data for + * components in init state. + * + * XSAVE could be used, but that would require to reshuffle the + * data when XSAVES is available because XSAVES uses xstate + * compaction. But doing so is a pointless exercise because most + * components have an all zeros init state except for the legacy + * ones (FP and SSE). Those can be saved with FXSAVE into the + * legacy area. Adding new features requires to ensure that init + * state is all zeroes or if not to add the necessary handling + * here. + */ + fxsave(&init_fpstate.fxsave); +} + +static int xfeature_uncompacted_offset(int xfeature_nr) +{ + u32 eax, ebx, ecx, edx; + + /* + * Only XSAVES supports supervisor states and it uses compacted + * format. Checking a supervisor state's uncompacted offset is + * an error. + */ + if (XFEATURE_MASK_SUPERVISOR & (1 << xfeature_nr)) { + WARN_ONCE(1, "No fixed offset for xstate %d\n", xfeature_nr); + return -1; + } + + CHECK_XFEATURE(xfeature_nr); + cpuid_count(XSTATE_CPUID, xfeature_nr, &eax, &ebx, &ecx, &edx); + return ebx; +} + +static int xfeature_size(int xfeature_nr) +{ + u32 eax, ebx, ecx, edx; + + CHECK_XFEATURE(xfeature_nr); + cpuid_count(XSTATE_CPUID, xfeature_nr, &eax, &ebx, &ecx, &edx); + return eax; +} + +/* + * 'XSAVES' implies two different things: + * 1. saving of supervisor/system state + * 2. using the compacted format + * + * Use this function when dealing with the compacted format so + * that it is obvious which aspect of 'XSAVES' is being handled + * by the calling code. + */ +int using_compacted_format(void) +{ + return boot_cpu_has(X86_FEATURE_XSAVES); +} + +/* Validate an xstate header supplied by userspace (ptrace or sigreturn) */ +int validate_xstate_header(const struct xstate_header *hdr) +{ + /* No unknown or supervisor features may be set */ + if (hdr->xfeatures & (~xfeatures_mask | XFEATURE_MASK_SUPERVISOR)) + return -EINVAL; + + /* Userspace must use the uncompacted format */ + if (hdr->xcomp_bv) + return -EINVAL; + + /* + * If 'reserved' is shrunken to add a new field, make sure to validate + * that new field here! + */ + BUILD_BUG_ON(sizeof(hdr->reserved) != 48); + + /* No reserved bits may be set */ + if (memchr_inv(hdr->reserved, 0, sizeof(hdr->reserved))) + return -EINVAL; + + return 0; +} + +static void __xstate_dump_leaves(void) +{ + int i; + u32 eax, ebx, ecx, edx; + static int should_dump = 1; + + if (!should_dump) + return; + should_dump = 0; + /* + * Dump out a few leaves past the ones that we support + * just in case there are some goodies up there + */ + for (i = 0; i < XFEATURE_MAX + 10; i++) { + cpuid_count(XSTATE_CPUID, i, &eax, &ebx, &ecx, &edx); + pr_warn("CPUID[%02x, %02x]: eax=%08x ebx=%08x ecx=%08x edx=%08x\n", + XSTATE_CPUID, i, eax, ebx, ecx, edx); + } +} + +#define XSTATE_WARN_ON(x) do { \ + if (WARN_ONCE(x, "XSAVE consistency problem, dumping leaves")) { \ + __xstate_dump_leaves(); \ + } \ +} while (0) + +#define XCHECK_SZ(sz, nr, nr_macro, __struct) do { \ + if ((nr == nr_macro) && \ + WARN_ONCE(sz != sizeof(__struct), \ + "%s: struct is %zu bytes, cpu state %d bytes\n", \ + __stringify(nr_macro), sizeof(__struct), sz)) { \ + __xstate_dump_leaves(); \ + } \ +} while (0) + +/* + * We have a C struct for each 'xstate'. We need to ensure + * that our software representation matches what the CPU + * tells us about the state's size. + */ +static void check_xstate_against_struct(int nr) +{ + /* + * Ask the CPU for the size of the state. + */ + int sz = xfeature_size(nr); + /* + * Match each CPU state with the corresponding software + * structure. + */ + XCHECK_SZ(sz, nr, XFEATURE_YMM, struct ymmh_struct); + XCHECK_SZ(sz, nr, XFEATURE_BNDREGS, struct mpx_bndreg_state); + XCHECK_SZ(sz, nr, XFEATURE_BNDCSR, struct mpx_bndcsr_state); + XCHECK_SZ(sz, nr, XFEATURE_OPMASK, struct avx_512_opmask_state); + XCHECK_SZ(sz, nr, XFEATURE_ZMM_Hi256, struct avx_512_zmm_uppers_state); + XCHECK_SZ(sz, nr, XFEATURE_Hi16_ZMM, struct avx_512_hi16_state); + XCHECK_SZ(sz, nr, XFEATURE_PKRU, struct pkru_state); + + /* + * Make *SURE* to add any feature numbers in below if + * there are "holes" in the xsave state component + * numbers. + */ + if ((nr < XFEATURE_YMM) || + (nr >= XFEATURE_MAX) || + (nr == XFEATURE_PT_UNIMPLEMENTED_SO_FAR)) { + WARN_ONCE(1, "no structure for xstate: %d\n", nr); + XSTATE_WARN_ON(1); + } +} + +/* + * This essentially double-checks what the cpu told us about + * how large the XSAVE buffer needs to be. We are recalculating + * it to be safe. + */ +static void do_extra_xstate_size_checks(void) +{ + int paranoid_xstate_size = FXSAVE_SIZE + XSAVE_HDR_SIZE; + int i; + + for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) { + if (!xfeature_enabled(i)) + continue; + + check_xstate_against_struct(i); + /* + * Supervisor state components can be managed only by + * XSAVES, which is compacted-format only. + */ + if (!using_compacted_format()) + XSTATE_WARN_ON(xfeature_is_supervisor(i)); + + /* Align from the end of the previous feature */ + if (xfeature_is_aligned(i)) + paranoid_xstate_size = ALIGN(paranoid_xstate_size, 64); + /* + * The offset of a given state in the non-compacted + * format is given to us in a CPUID leaf. We check + * them for being ordered (increasing offsets) in + * setup_xstate_features(). + */ + if (!using_compacted_format()) + paranoid_xstate_size = xfeature_uncompacted_offset(i); + /* + * The compacted-format offset always depends on where + * the previous state ended. + */ + paranoid_xstate_size += xfeature_size(i); + } + XSTATE_WARN_ON(paranoid_xstate_size != fpu_kernel_xstate_size); +} + + +/* + * Get total size of enabled xstates in XCR0/xfeatures_mask. + * + * Note the SDM's wording here. "sub-function 0" only enumerates + * the size of the *user* states. If we use it to size a buffer + * that we use 'XSAVES' on, we could potentially overflow the + * buffer because 'XSAVES' saves system states too. + * + * Note that we do not currently set any bits on IA32_XSS so + * 'XCR0 | IA32_XSS == XCR0' for now. + */ +static unsigned int __init get_xsaves_size(void) +{ + unsigned int eax, ebx, ecx, edx; + /* + * - CPUID function 0DH, sub-function 1: + * EBX enumerates the size (in bytes) required by + * the XSAVES instruction for an XSAVE area + * containing all the state components + * corresponding to bits currently set in + * XCR0 | IA32_XSS. + */ + cpuid_count(XSTATE_CPUID, 1, &eax, &ebx, &ecx, &edx); + return ebx; +} + +static unsigned int __init get_xsave_size(void) +{ + unsigned int eax, ebx, ecx, edx; + /* + * - CPUID function 0DH, sub-function 0: + * EBX enumerates the size (in bytes) required by + * the XSAVE instruction for an XSAVE area + * containing all the *user* state components + * corresponding to bits currently set in XCR0. + */ + cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx); + return ebx; +} + +/* + * Will the runtime-enumerated 'xstate_size' fit in the init + * task's statically-allocated buffer? + */ +static bool is_supported_xstate_size(unsigned int test_xstate_size) +{ + if (test_xstate_size <= sizeof(union fpregs_state)) + return true; + + pr_warn("x86/fpu: xstate buffer too small (%zu < %d), disabling xsave\n", + sizeof(union fpregs_state), test_xstate_size); + return false; +} + +static int init_xstate_size(void) +{ + /* Recompute the context size for enabled features: */ + unsigned int possible_xstate_size; + unsigned int xsave_size; + + xsave_size = get_xsave_size(); + + if (boot_cpu_has(X86_FEATURE_XSAVES)) + possible_xstate_size = get_xsaves_size(); + else + possible_xstate_size = xsave_size; + + /* Ensure we have the space to store all enabled: */ + if (!is_supported_xstate_size(possible_xstate_size)) + return -EINVAL; + + /* + * The size is OK, we are definitely going to use xsave, + * make it known to the world that we need more space. + */ + fpu_kernel_xstate_size = possible_xstate_size; + do_extra_xstate_size_checks(); + + /* + * User space is always in standard format. + */ + fpu_user_xstate_size = xsave_size; + return 0; +} + +/* + * We enabled the XSAVE hardware, but something went wrong and + * we can not use it. Disable it. + */ +static void fpu__init_disable_system_xstate(void) +{ + xfeatures_mask = 0; + cr4_clear_bits(X86_CR4_OSXSAVE); + fpu__xstate_clear_all_cpu_caps(); +} + +/* + * Enable and initialize the xsave feature. + * Called once per system bootup. + */ +void __init fpu__init_system_xstate(void) +{ + unsigned int eax, ebx, ecx, edx; + static int on_boot_cpu __initdata = 1; + int err; + int i; + + WARN_ON_FPU(!on_boot_cpu); + on_boot_cpu = 0; + + if (!boot_cpu_has(X86_FEATURE_FPU)) { + pr_info("x86/fpu: No FPU detected\n"); + return; + } + + if (!boot_cpu_has(X86_FEATURE_XSAVE)) { + pr_info("x86/fpu: x87 FPU will use %s\n", + boot_cpu_has(X86_FEATURE_FXSR) ? "FXSAVE" : "FSAVE"); + return; + } + + if (boot_cpu_data.cpuid_level < XSTATE_CPUID) { + WARN_ON_FPU(1); + return; + } + + cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx); + xfeatures_mask = eax + ((u64)edx << 32); + + if ((xfeatures_mask & XFEATURE_MASK_FPSSE) != XFEATURE_MASK_FPSSE) { + /* + * This indicates that something really unexpected happened + * with the enumeration. Disable XSAVE and try to continue + * booting without it. This is too early to BUG(). + */ + pr_err("x86/fpu: FP/SSE not present amongst the CPU's xstate features: 0x%llx.\n", xfeatures_mask); + goto out_disable; + } + + /* + * Clear XSAVE features that are disabled in the normal CPUID. + */ + for (i = 0; i < ARRAY_SIZE(xsave_cpuid_features); i++) { + if (!boot_cpu_has(xsave_cpuid_features[i])) + xfeatures_mask &= ~BIT(i); + } + + xfeatures_mask &= fpu__get_supported_xfeatures_mask(); + + /* Enable xstate instructions to be able to continue with initialization: */ + fpu__init_cpu_xstate(); + err = init_xstate_size(); + if (err) + goto out_disable; + + /* + * Update info used for ptrace frames; use standard-format size and no + * supervisor xstates: + */ + update_regset_xstate_info(fpu_user_xstate_size, xfeatures_mask & ~XFEATURE_MASK_SUPERVISOR); + + fpu__init_prepare_fx_sw_frame(); + setup_init_fpu_buf(); + setup_xstate_comp(); + print_xstate_offset_size(); + + pr_info("x86/fpu: Enabled xstate features 0x%llx, context size is %d bytes, using '%s' format.\n", + xfeatures_mask, + fpu_kernel_xstate_size, + boot_cpu_has(X86_FEATURE_XSAVES) ? "compacted" : "standard"); + return; + +out_disable: + /* something went wrong, try to boot without any XSAVE support */ + fpu__init_disable_system_xstate(); +} + +/* + * Restore minimal FPU state after suspend: + */ +void fpu__resume_cpu(void) +{ + /* + * Restore XCR0 on xsave capable CPUs: + */ + if (boot_cpu_has(X86_FEATURE_XSAVE)) + xsetbv(XCR_XFEATURE_ENABLED_MASK, xfeatures_mask); +} + +/* + * Given an xstate feature mask, calculate where in the xsave + * buffer the state is. Callers should ensure that the buffer + * is valid. + * + * Note: does not work for compacted buffers. + */ +void *__raw_xsave_addr(struct xregs_state *xsave, int xstate_feature_mask) +{ + int feature_nr = fls64(xstate_feature_mask) - 1; + + if (!xfeature_enabled(feature_nr)) { + WARN_ON_FPU(1); + return NULL; + } + + return (void *)xsave + xstate_comp_offsets[feature_nr]; +} +/* + * Given the xsave area and a state inside, this function returns the + * address of the state. + * + * This is the API that is called to get xstate address in either + * standard format or compacted format of xsave area. + * + * Note that if there is no data for the field in the xsave buffer + * this will return NULL. + * + * Inputs: + * xstate: the thread's storage area for all FPU data + * xstate_feature: state which is defined in xsave.h (e.g. + * XFEATURE_MASK_FP, XFEATURE_MASK_SSE, etc...) + * Output: + * address of the state in the xsave area, or NULL if the + * field is not present in the xsave buffer. + */ +void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature) +{ + /* + * Do we even *have* xsave state? + */ + if (!boot_cpu_has(X86_FEATURE_XSAVE)) + return NULL; + + /* + * We should not ever be requesting features that we + * have not enabled. Remember that pcntxt_mask is + * what we write to the XCR0 register. + */ + WARN_ONCE(!(xfeatures_mask & xstate_feature), + "get of unsupported state"); + /* + * This assumes the last 'xsave*' instruction to + * have requested that 'xstate_feature' be saved. + * If it did not, we might be seeing and old value + * of the field in the buffer. + * + * This can happen because the last 'xsave' did not + * request that this feature be saved (unlikely) + * or because the "init optimization" caused it + * to not be saved. + */ + if (!(xsave->header.xfeatures & xstate_feature)) + return NULL; + + return __raw_xsave_addr(xsave, xstate_feature); +} +EXPORT_SYMBOL_GPL(get_xsave_addr); + +/* + * This wraps up the common operations that need to occur when retrieving + * data from xsave state. It first ensures that the current task was + * using the FPU and retrieves the data in to a buffer. It then calculates + * the offset of the requested field in the buffer. + * + * This function is safe to call whether the FPU is in use or not. + * + * Note that this only works on the current task. + * + * Inputs: + * @xsave_state: state which is defined in xsave.h (e.g. XFEATURE_MASK_FP, + * XFEATURE_MASK_SSE, etc...) + * Output: + * address of the state in the xsave area or NULL if the state + * is not present or is in its 'init state'. + */ +const void *get_xsave_field_ptr(int xsave_state) +{ + struct fpu *fpu = ¤t->thread.fpu; + + if (!fpu->initialized) + return NULL; + /* + * fpu__save() takes the CPU's xstate registers + * and saves them off to the 'fpu memory buffer. + */ + fpu__save(fpu); + + return get_xsave_addr(&fpu->state.xsave, xsave_state); +} + +#ifdef CONFIG_ARCH_HAS_PKEYS + +/* + * This will go out and modify PKRU register to set the access + * rights for @pkey to @init_val. + */ +int arch_set_user_pkey_access(struct task_struct *tsk, int pkey, + unsigned long init_val) +{ + u32 old_pkru; + int pkey_shift = (pkey * PKRU_BITS_PER_PKEY); + u32 new_pkru_bits = 0; + + /* + * This check implies XSAVE support. OSPKE only gets + * set if we enable XSAVE and we enable PKU in XCR0. + */ + if (!boot_cpu_has(X86_FEATURE_OSPKE)) + return -EINVAL; + + /* + * This code should only be called with valid 'pkey' + * values originating from in-kernel users. Complain + * if a bad value is observed. + */ + WARN_ON_ONCE(pkey >= arch_max_pkey()); + + /* Set the bits we need in PKRU: */ + if (init_val & PKEY_DISABLE_ACCESS) + new_pkru_bits |= PKRU_AD_BIT; + if (init_val & PKEY_DISABLE_WRITE) + new_pkru_bits |= PKRU_WD_BIT; + + /* Shift the bits in to the correct place in PKRU for pkey: */ + new_pkru_bits <<= pkey_shift; + + /* Get old PKRU and mask off any old bits in place: */ + old_pkru = read_pkru(); + old_pkru &= ~((PKRU_AD_BIT|PKRU_WD_BIT) << pkey_shift); + + /* Write old part along with new part: */ + write_pkru(old_pkru | new_pkru_bits); + + return 0; +} +#endif /* ! CONFIG_ARCH_HAS_PKEYS */ + +/* + * Weird legacy quirk: SSE and YMM states store information in the + * MXCSR and MXCSR_FLAGS fields of the FP area. That means if the FP + * area is marked as unused in the xfeatures header, we need to copy + * MXCSR and MXCSR_FLAGS if either SSE or YMM are in use. + */ +static inline bool xfeatures_mxcsr_quirk(u64 xfeatures) +{ + if (!(xfeatures & (XFEATURE_MASK_SSE|XFEATURE_MASK_YMM))) + return false; + + if (xfeatures & XFEATURE_MASK_FP) + return false; + + return true; +} + +static void fill_gap(unsigned to, void **kbuf, unsigned *pos, unsigned *count) +{ + if (*pos < to) { + unsigned size = to - *pos; + + if (size > *count) + size = *count; + memcpy(*kbuf, (void *)&init_fpstate.xsave + *pos, size); + *kbuf += size; + *pos += size; + *count -= size; + } +} + +static void copy_part(unsigned offset, unsigned size, void *from, + void **kbuf, unsigned *pos, unsigned *count) +{ + fill_gap(offset, kbuf, pos, count); + if (size > *count) + size = *count; + if (size) { + memcpy(*kbuf, from, size); + *kbuf += size; + *pos += size; + *count -= size; + } +} + +/* + * Convert from kernel XSAVES compacted format to standard format and copy + * to a kernel-space ptrace buffer. + * + * It supports partial copy but pos always starts from zero. This is called + * from xstateregs_get() and there we check the CPU has XSAVES. + */ +int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int offset_start, unsigned int size_total) +{ + struct xstate_header header; + const unsigned off_mxcsr = offsetof(struct fxregs_state, mxcsr); + unsigned count = size_total; + int i; + + /* + * Currently copy_regset_to_user() starts from pos 0: + */ + if (unlikely(offset_start != 0)) + return -EFAULT; + + /* + * The destination is a ptrace buffer; we put in only user xstates: + */ + memset(&header, 0, sizeof(header)); + header.xfeatures = xsave->header.xfeatures; + header.xfeatures &= ~XFEATURE_MASK_SUPERVISOR; + + if (header.xfeatures & XFEATURE_MASK_FP) + copy_part(0, off_mxcsr, + &xsave->i387, &kbuf, &offset_start, &count); + if (header.xfeatures & (XFEATURE_MASK_SSE | XFEATURE_MASK_YMM)) + copy_part(off_mxcsr, MXCSR_AND_FLAGS_SIZE, + &xsave->i387.mxcsr, &kbuf, &offset_start, &count); + if (header.xfeatures & XFEATURE_MASK_FP) + copy_part(offsetof(struct fxregs_state, st_space), 128, + &xsave->i387.st_space, &kbuf, &offset_start, &count); + if (header.xfeatures & XFEATURE_MASK_SSE) + copy_part(xstate_offsets[XFEATURE_SSE], 256, + &xsave->i387.xmm_space, &kbuf, &offset_start, &count); + /* + * Fill xsave->i387.sw_reserved value for ptrace frame: + */ + copy_part(offsetof(struct fxregs_state, sw_reserved), 48, + xstate_fx_sw_bytes, &kbuf, &offset_start, &count); + /* + * Copy xregs_state->header: + */ + copy_part(offsetof(struct xregs_state, header), sizeof(header), + &header, &kbuf, &offset_start, &count); + + for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) { + /* + * Copy only in-use xstates: + */ + if ((header.xfeatures >> i) & 1) { + void *src = __raw_xsave_addr(xsave, 1 << i); + + copy_part(xstate_offsets[i], xstate_sizes[i], + src, &kbuf, &offset_start, &count); + } + + } + fill_gap(size_total, &kbuf, &offset_start, &count); + + return 0; +} + +static inline int +__copy_xstate_to_user(void __user *ubuf, const void *data, unsigned int offset, unsigned int size, unsigned int size_total) +{ + if (!size) + return 0; + + if (offset < size_total) { + unsigned int copy = min(size, size_total - offset); + + if (__copy_to_user(ubuf + offset, data, copy)) + return -EFAULT; + } + return 0; +} + +/* + * Convert from kernel XSAVES compacted format to standard format and copy + * to a user-space buffer. It supports partial copy but pos always starts from + * zero. This is called from xstateregs_get() and there we check the CPU + * has XSAVES. + */ +int copy_xstate_to_user(void __user *ubuf, struct xregs_state *xsave, unsigned int offset_start, unsigned int size_total) +{ + unsigned int offset, size; + int ret, i; + struct xstate_header header; + + /* + * Currently copy_regset_to_user() starts from pos 0: + */ + if (unlikely(offset_start != 0)) + return -EFAULT; + + /* + * The destination is a ptrace buffer; we put in only user xstates: + */ + memset(&header, 0, sizeof(header)); + header.xfeatures = xsave->header.xfeatures; + header.xfeatures &= ~XFEATURE_MASK_SUPERVISOR; + + /* + * Copy xregs_state->header: + */ + offset = offsetof(struct xregs_state, header); + size = sizeof(header); + + ret = __copy_xstate_to_user(ubuf, &header, offset, size, size_total); + if (ret) + return ret; + + for (i = 0; i < XFEATURE_MAX; i++) { + /* + * Copy only in-use xstates: + */ + if ((header.xfeatures >> i) & 1) { + void *src = __raw_xsave_addr(xsave, 1 << i); + + offset = xstate_offsets[i]; + size = xstate_sizes[i]; + + /* The next component has to fit fully into the output buffer: */ + if (offset + size > size_total) + break; + + ret = __copy_xstate_to_user(ubuf, src, offset, size, size_total); + if (ret) + return ret; + } + + } + + if (xfeatures_mxcsr_quirk(header.xfeatures)) { + offset = offsetof(struct fxregs_state, mxcsr); + size = MXCSR_AND_FLAGS_SIZE; + __copy_xstate_to_user(ubuf, &xsave->i387.mxcsr, offset, size, size_total); + } + + /* + * Fill xsave->i387.sw_reserved value for ptrace frame: + */ + offset = offsetof(struct fxregs_state, sw_reserved); + size = sizeof(xstate_fx_sw_bytes); + + ret = __copy_xstate_to_user(ubuf, xstate_fx_sw_bytes, offset, size, size_total); + if (ret) + return ret; + + return 0; +} + +/* + * Convert from a ptrace standard-format kernel buffer to kernel XSAVES format + * and copy to the target thread. This is called from xstateregs_set(). + */ +int copy_kernel_to_xstate(struct xregs_state *xsave, const void *kbuf) +{ + unsigned int offset, size; + int i; + struct xstate_header hdr; + + offset = offsetof(struct xregs_state, header); + size = sizeof(hdr); + + memcpy(&hdr, kbuf + offset, size); + + if (validate_xstate_header(&hdr)) + return -EINVAL; + + for (i = 0; i < XFEATURE_MAX; i++) { + u64 mask = ((u64)1 << i); + + if (hdr.xfeatures & mask) { + void *dst = __raw_xsave_addr(xsave, 1 << i); + + offset = xstate_offsets[i]; + size = xstate_sizes[i]; + + memcpy(dst, kbuf + offset, size); + } + } + + if (xfeatures_mxcsr_quirk(hdr.xfeatures)) { + offset = offsetof(struct fxregs_state, mxcsr); + size = MXCSR_AND_FLAGS_SIZE; + memcpy(&xsave->i387.mxcsr, kbuf + offset, size); + } + + /* + * The state that came in from userspace was user-state only. + * Mask all the user states out of 'xfeatures': + */ + xsave->header.xfeatures &= XFEATURE_MASK_SUPERVISOR; + + /* + * Add back in the features that came in from userspace: + */ + xsave->header.xfeatures |= hdr.xfeatures; + + return 0; +} + +/* + * Convert from a ptrace or sigreturn standard-format user-space buffer to + * kernel XSAVES format and copy to the target thread. This is called from + * xstateregs_set(), as well as potentially from the sigreturn() and + * rt_sigreturn() system calls. + */ +int copy_user_to_xstate(struct xregs_state *xsave, const void __user *ubuf) +{ + unsigned int offset, size; + int i; + struct xstate_header hdr; + + offset = offsetof(struct xregs_state, header); + size = sizeof(hdr); + + if (__copy_from_user(&hdr, ubuf + offset, size)) + return -EFAULT; + + if (validate_xstate_header(&hdr)) + return -EINVAL; + + for (i = 0; i < XFEATURE_MAX; i++) { + u64 mask = ((u64)1 << i); + + if (hdr.xfeatures & mask) { + void *dst = __raw_xsave_addr(xsave, 1 << i); + + offset = xstate_offsets[i]; + size = xstate_sizes[i]; + + if (__copy_from_user(dst, ubuf + offset, size)) + return -EFAULT; + } + } + + if (xfeatures_mxcsr_quirk(hdr.xfeatures)) { + offset = offsetof(struct fxregs_state, mxcsr); + size = MXCSR_AND_FLAGS_SIZE; + if (__copy_from_user(&xsave->i387.mxcsr, ubuf + offset, size)) + return -EFAULT; + } + + /* + * The state that came in from userspace was user-state only. + * Mask all the user states out of 'xfeatures': + */ + xsave->header.xfeatures &= XFEATURE_MASK_SUPERVISOR; + + /* + * Add back in the features that came in from userspace: + */ + xsave->header.xfeatures |= hdr.xfeatures; + + return 0; +} |