summaryrefslogtreecommitdiffstats
path: root/arch/x86/platform/ce4100
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/platform/ce4100')
-rw-r--r--arch/x86/platform/ce4100/Makefile1
-rw-r--r--arch/x86/platform/ce4100/ce4100.c160
-rw-r--r--arch/x86/platform/ce4100/falconfalls.dts433
3 files changed, 594 insertions, 0 deletions
diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile
new file mode 100644
index 000000000..91fc92971
--- /dev/null
+++ b/arch/x86/platform/ce4100/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_X86_INTEL_CE) += ce4100.o
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
new file mode 100644
index 000000000..ce4b06733
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -0,0 +1,160 @@
+/*
+ * Intel CE4100 platform specific setup code
+ *
+ * (C) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/reboot.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/ce4100.h>
+#include <asm/prom.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/io.h>
+#include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
+
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+ outb(0x4, 0xcf9);
+}
+
+#ifdef CONFIG_SERIAL_8250
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return readl(p->membase + offset);
+}
+
+/*
+ * The UART Tx interrupts are not set under some conditions and therefore serial
+ * transmission hangs. This is a silicon issue and has not been root caused. The
+ * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
+ * bit of LSR register in interrupt handler to see whether at least one of these
+ * two bits is set, if so then process the transmit request. If this workaround
+ * is not applied, then the serial transmission may hang. This workaround is for
+ * errata number 9 in Errata - B step.
+*/
+
+static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int ret, ier, lsr;
+
+ if (offset == UART_IIR) {
+ offset = offset << p->regshift;
+ ret = readl(p->membase + offset);
+ if (ret & UART_IIR_NO_INT) {
+ /* see if the TX interrupt should have really set */
+ ier = mem_serial_in(p, UART_IER);
+ /* see if the UART's XMIT interrupt is enabled */
+ if (ier & UART_IER_THRI) {
+ lsr = mem_serial_in(p, UART_LSR);
+ /* now check to see if the UART should be
+ generating an interrupt (but isn't) */
+ if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+ ret &= ~UART_IIR_NO_INT;
+ }
+ }
+ } else
+ ret = mem_serial_in(p, offset);
+ return ret;
+}
+
+static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static void ce4100_serial_fixup(int port, struct uart_port *up,
+ u32 *capabilites)
+{
+#ifdef CONFIG_EARLY_PRINTK
+ /*
+ * Over ride the legacy port configuration that comes from
+ * asm/serial.h. Using the ioport driver then switching to the
+ * PCI memmaped driver hangs the IOAPIC
+ */
+ if (up->iotype != UPIO_MEM32) {
+ up->uartclk = 14745600;
+ up->mapbase = 0xdffe0200;
+ set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+ up->mapbase & PAGE_MASK);
+ up->membase =
+ (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ up->membase += up->mapbase & ~PAGE_MASK;
+ up->mapbase += port * 0x100;
+ up->membase += port * 0x100;
+ up->iotype = UPIO_MEM32;
+ up->regshift = 2;
+ up->irq = 4;
+ }
+#endif
+ up->iobase = 0;
+ up->serial_in = ce4100_mem_serial_in;
+ up->serial_out = ce4100_mem_serial_out;
+
+ *capabilites |= (1 << 12);
+}
+
+static __init void sdv_serial_fixup(void)
+{
+ serial8250_set_isa_configurator(ce4100_serial_fixup);
+}
+
+#else
+static inline void sdv_serial_fixup(void) {};
+#endif
+
+static void __init sdv_arch_setup(void)
+{
+ sdv_serial_fixup();
+}
+
+static void sdv_pci_init(void)
+{
+ x86_of_pci_init();
+}
+
+/*
+ * CE4100 specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_ce4100_early_setup(void)
+{
+ x86_init.oem.arch_setup = sdv_arch_setup;
+ x86_init.resources.probe_roms = x86_init_noop;
+ x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+ x86_init.mpparse.find_smp_config = x86_init_noop;
+ x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
+ x86_init.pci.init = ce4100_pci_init;
+ x86_init.pci.init_irq = sdv_pci_init;
+
+ /*
+ * By default, the reboot method is ACPI which is supported by the
+ * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+ * the bootloader will however issue a system power off instead of
+ * reboot. By using BOOT_KBD we ensure proper system reboot as
+ * expected.
+ */
+ reboot_type = BOOT_KBD;
+
+ pm_power_off = ce4100_power_off;
+}
diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
new file mode 100644
index 000000000..ce874f872
--- /dev/null
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -0,0 +1,433 @@
+/*
+ * CE4100 on Falcon Falls
+ *
+ * (c) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+/dts-v1/;
+/ {
+ model = "intel,falconfalls";
+ compatible = "intel,falconfalls";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "intel,ce4100";
+ reg = <0>;
+ lapic = <&lapic0>;
+ };
+ };
+
+ soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,ce4100-cp";
+ ranges;
+
+ ioapic1: interrupt-controller@fec00000 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ce4100-ioapic";
+ interrupt-controller;
+ reg = <0xfec00000 0x1000>;
+ };
+
+ timer@fed00000 {
+ compatible = "intel,ce4100-hpet";
+ reg = <0xfed00000 0x200>;
+ };
+
+ lapic0: interrupt-controller@fee00000 {
+ compatible = "intel,ce4100-lapic";
+ reg = <0xfee00000 0x1000>;
+ };
+
+ pci@3fc {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "intel,ce4100-pci", "pci";
+ device_type = "pci";
+ bus-range = <0 0>;
+ ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000
+ 0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000
+ 0x0000000 0 0x0 0x0 0 0x100>;
+
+ /* Secondary IO-APIC */
+ ioapic2: interrupt-controller@0,1 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ce4100-ioapic";
+ interrupt-controller;
+ reg = <0x100 0x0 0x0 0x0 0x0>;
+ assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>;
+ };
+
+ pci@1,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "intel,ce4100-pci", "pci";
+ device_type = "pci";
+ bus-range = <1 1>;
+ reg = <0x0800 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
+
+ interrupt-parent = <&ioapic2>;
+
+ display@2,0 {
+ compatible = "pci8086,2e5b.2",
+ "pci8086,2e5b",
+ "pciclass038000",
+ "pciclass0380";
+
+ reg = <0x11000 0x0 0x0 0x0 0x0>;
+ interrupts = <0 1>;
+ };
+
+ multimedia@3,0 {
+ compatible = "pci8086,2e5c.2",
+ "pci8086,2e5c",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x11800 0x0 0x0 0x0 0x0>;
+ interrupts = <2 1>;
+ };
+
+ multimedia@4,0 {
+ compatible = "pci8086,2e5d.2",
+ "pci8086,2e5d",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x12000 0x0 0x0 0x0 0x0>;
+ interrupts = <4 1>;
+ };
+
+ multimedia@4,1 {
+ compatible = "pci8086,2e5e.2",
+ "pci8086,2e5e",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x12100 0x0 0x0 0x0 0x0>;
+ interrupts = <5 1>;
+ };
+
+ sound@6,0 {
+ compatible = "pci8086,2e5f.2",
+ "pci8086,2e5f",
+ "pciclass040100",
+ "pciclass0401";
+
+ reg = <0x13000 0x0 0x0 0x0 0x0>;
+ interrupts = <6 1>;
+ };
+
+ sound@6,1 {
+ compatible = "pci8086,2e5f.2",
+ "pci8086,2e5f",
+ "pciclass040100",
+ "pciclass0401";
+
+ reg = <0x13100 0x0 0x0 0x0 0x0>;
+ interrupts = <7 1>;
+ };
+
+ sound@6,2 {
+ compatible = "pci8086,2e60.2",
+ "pci8086,2e60",
+ "pciclass040100",
+ "pciclass0401";
+
+ reg = <0x13200 0x0 0x0 0x0 0x0>;
+ interrupts = <8 1>;
+ };
+
+ display@8,0 {
+ compatible = "pci8086,2e61.2",
+ "pci8086,2e61",
+ "pciclass038000",
+ "pciclass0380";
+
+ reg = <0x14000 0x0 0x0 0x0 0x0>;
+ interrupts = <9 1>;
+ };
+
+ display@8,1 {
+ compatible = "pci8086,2e62.2",
+ "pci8086,2e62",
+ "pciclass038000",
+ "pciclass0380";
+
+ reg = <0x14100 0x0 0x0 0x0 0x0>;
+ interrupts = <10 1>;
+ };
+
+ multimedia@8,2 {
+ compatible = "pci8086,2e63.2",
+ "pci8086,2e63",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x14200 0x0 0x0 0x0 0x0>;
+ interrupts = <11 1>;
+ };
+
+ entertainment-encryption@9,0 {
+ compatible = "pci8086,2e64.2",
+ "pci8086,2e64",
+ "pciclass101000",
+ "pciclass1010";
+
+ reg = <0x14800 0x0 0x0 0x0 0x0>;
+ interrupts = <12 1>;
+ };
+
+ localbus@a,0 {
+ compatible = "pci8086,2e65.2",
+ "pci8086,2e65",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x15000 0x0 0x0 0x0 0x0>;
+ };
+
+ serial@b,0 {
+ compatible = "pci8086,2e66.2",
+ "pci8086,2e66",
+ "pciclass070003",
+ "pciclass0700";
+
+ reg = <0x15800 0x0 0x0 0x0 0x0>;
+ interrupts = <14 1>;
+ };
+
+ pcigpio: gpio@b,1 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "pci8086,2e67.2",
+ "pci8086,2e67",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x15900 0x0 0x0 0x0 0x0>;
+ interrupts = <15 1>;
+ interrupt-controller;
+ gpio-controller;
+ intel,muxctl = <0>;
+ };
+
+ i2c-controller@b,2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "pci8086,2e68.2",
+ "pci8086,2e68",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15a00 0x0 0x0 0x0 0x0>;
+ interrupts = <16 1>;
+ ranges = <0 0 0x02000000 0 0xdffe0500 0x100
+ 1 0 0x02000000 0 0xdffe0600 0x100
+ 2 0 0x02000000 0 0xdffe0700 0x100>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <0 0 0x100>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <1 0 0x100>;
+
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <2 0 0x100>;
+
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+ };
+
+ smard-card@b,3 {
+ compatible = "pci8086,2e69.2",
+ "pci8086,2e69",
+ "pciclass070500",
+ "pciclass0705";
+
+ reg = <0x15b00 0x0 0x0 0x0 0x0>;
+ interrupts = <15 1>;
+ };
+
+ spi-controller@b,4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible =
+ "pci8086,2e6a.2",
+ "pci8086,2e6a",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15c00 0x0 0x0 0x0 0x0>;
+ interrupts = <15 1>;
+
+ dac@0 {
+ compatible = "ti,pcm1755";
+ reg = <0>;
+ spi-max-frequency = <115200>;
+ };
+
+ dac@1 {
+ compatible = "ti,pcm1609a";
+ reg = <1>;
+ spi-max-frequency = <115200>;
+ };
+
+ eeprom@2 {
+ compatible = "atmel,at93c46";
+ reg = <2>;
+ spi-max-frequency = <115200>;
+ };
+ };
+
+ multimedia@b,7 {
+ compatible = "pci8086,2e6d.2",
+ "pci8086,2e6d",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x15f00 0x0 0x0 0x0 0x0>;
+ };
+
+ ethernet@c,0 {
+ compatible = "pci8086,2e6e.2",
+ "pci8086,2e6e",
+ "pciclass020000",
+ "pciclass0200";
+
+ reg = <0x16000 0x0 0x0 0x0 0x0>;
+ interrupts = <21 1>;
+ };
+
+ clock@c,1 {
+ compatible = "pci8086,2e6f.2",
+ "pci8086,2e6f",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x16100 0x0 0x0 0x0 0x0>;
+ interrupts = <3 1>;
+ };
+
+ usb@d,0 {
+ compatible = "pci8086,2e70.2",
+ "pci8086,2e70",
+ "pciclass0c0320",
+ "pciclass0c03";
+
+ reg = <0x16800 0x0 0x0 0x0 0x0>;
+ interrupts = <22 1>;
+ };
+
+ usb@d,1 {
+ compatible = "pci8086,2e70.2",
+ "pci8086,2e70",
+ "pciclass0c0320",
+ "pciclass0c03";
+
+ reg = <0x16900 0x0 0x0 0x0 0x0>;
+ interrupts = <22 1>;
+ };
+
+ sata@e,0 {
+ compatible = "pci8086,2e71.0",
+ "pci8086,2e71",
+ "pciclass010601",
+ "pciclass0106";
+
+ reg = <0x17000 0x0 0x0 0x0 0x0>;
+ interrupts = <23 1>;
+ };
+
+ flash@f,0 {
+ compatible = "pci8086,701.1",
+ "pci8086,701",
+ "pciclass050100",
+ "pciclass0501";
+
+ reg = <0x17800 0x0 0x0 0x0 0x0>;
+ interrupts = <13 1>;
+ };
+
+ entertainment-encryption@10,0 {
+ compatible = "pci8086,702.1",
+ "pci8086,702",
+ "pciclass101000",
+ "pciclass1010";
+
+ reg = <0x18000 0x0 0x0 0x0 0x0>;
+ };
+
+ co-processor@11,0 {
+ compatible = "pci8086,703.1",
+ "pci8086,703",
+ "pciclass0b4000",
+ "pciclass0b40";
+
+ reg = <0x18800 0x0 0x0 0x0 0x0>;
+ interrupts = <1 1>;
+ };
+
+ multimedia@12,0 {
+ compatible = "pci8086,704.0",
+ "pci8086,704",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x19000 0x0 0x0 0x0 0x0>;
+ };
+ };
+
+ isa@1f,0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "isa";
+ reg = <0xf800 0x0 0x0 0x0 0x0>;
+ ranges = <1 0 0 0 0 0x100>;
+
+ rtc@70 {
+ compatible = "intel,ce4100-rtc", "motorola,mc146818";
+ interrupts = <8 3>;
+ interrupt-parent = <&ioapic1>;
+ ctrl-reg = <2>;
+ freq-reg = <0x26>;
+ reg = <1 0x70 2>;
+ };
+ };
+ };
+ };
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 13:03:21 +0000