diff options
Diffstat (limited to 'arch/xtensa/platforms')
| -rw-r--r-- | arch/xtensa/platforms/iss/Makefile | 10 | ||||
| -rw-r--r-- | arch/xtensa/platforms/iss/console.c | 268 | ||||
| -rw-r--r-- | arch/xtensa/platforms/iss/include/platform/serial.h | 15 | ||||
| -rw-r--r-- | arch/xtensa/platforms/iss/include/platform/simcall.h | 142 | ||||
| -rw-r--r-- | arch/xtensa/platforms/iss/network.c | 683 | ||||
| -rw-r--r-- | arch/xtensa/platforms/iss/setup.c | 106 | ||||
| -rw-r--r-- | arch/xtensa/platforms/iss/simdisk.c | 372 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xt2000/Makefile | 5 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xt2000/include/platform/hardware.h | 43 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xt2000/include/platform/serial.h | 28 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xt2000/setup.c | 155 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/Makefile | 10 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/include/platform/hardware.h | 60 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/include/platform/lcd.h | 35 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/include/platform/serial.h | 18 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/lcd.c | 89 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/setup.c | 310 |
17 files changed, 2349 insertions, 0 deletions
diff --git a/arch/xtensa/platforms/iss/Makefile b/arch/xtensa/platforms/iss/Makefile new file mode 100644 index 000000000..b3e89291c --- /dev/null +++ b/arch/xtensa/platforms/iss/Makefile @@ -0,0 +1,10 @@ +# $Id: Makefile,v 1.1.1.1 2002/08/28 16:10:14 aroll Exp $ +# +# Makefile for the Xtensa Instruction Set Simulator (ISS) +# "prom monitor" library routines under Linux. +# + +obj-y = setup.o +obj-$(CONFIG_TTY) += console.o +obj-$(CONFIG_NET) += network.o +obj-$(CONFIG_BLK_DEV_SIMDISK) += simdisk.o diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c new file mode 100644 index 000000000..e7faea3d7 --- /dev/null +++ b/arch/xtensa/platforms/iss/console.c @@ -0,0 +1,268 @@ +/* + * arch/xtensa/platforms/iss/console.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001-2005 Tensilica Inc. + * Authors Christian Zankel, Joe Taylor + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/major.h> +#include <linux/param.h> +#include <linux/seq_file.h> +#include <linux/serial.h> + +#include <linux/uaccess.h> +#include <asm/irq.h> + +#include <platform/simcall.h> + +#include <linux/tty.h> +#include <linux/tty_flip.h> + +#define SERIAL_MAX_NUM_LINES 1 +#define SERIAL_TIMER_VALUE (HZ / 10) + +static struct tty_driver *serial_driver; +static struct tty_port serial_port; +static struct timer_list serial_timer; + +static DEFINE_SPINLOCK(timer_lock); + +static char *serial_version = "0.1"; +static char *serial_name = "ISS serial driver"; + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ + +static void rs_poll(struct timer_list *); + +static int rs_open(struct tty_struct *tty, struct file * filp) +{ + tty->port = &serial_port; + spin_lock_bh(&timer_lock); + if (tty->count == 1) { + timer_setup(&serial_timer, rs_poll, 0); + mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); + } + spin_unlock_bh(&timer_lock); + + return 0; +} + + +/* + * ------------------------------------------------------------ + * iss_serial_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + spin_lock_bh(&timer_lock); + if (tty->count == 1) + del_timer_sync(&serial_timer); + spin_unlock_bh(&timer_lock); +} + + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + /* see drivers/char/serialX.c to reference original version */ + + simc_write(1, buf, count); + return count; +} + +static void rs_poll(struct timer_list *unused) +{ + struct tty_port *port = &serial_port; + int i = 0; + int rd = 1; + unsigned char c; + + spin_lock(&timer_lock); + + while (simc_poll(0)) { + rd = simc_read(0, &c, 1); + if (rd <= 0) + break; + tty_insert_flip_char(port, c, TTY_NORMAL); + i++; + } + + if (i) + tty_flip_buffer_push(port); + if (rd) + mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); + spin_unlock(&timer_lock); +} + + +static int rs_put_char(struct tty_struct *tty, unsigned char ch) +{ + return rs_write(tty, &ch, 1); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ +} + +static int rs_write_room(struct tty_struct *tty) +{ + /* Let's say iss can always accept 2K characters.. */ + return 2 * 1024; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + /* the iss doesn't buffer characters */ + return 0; +} + +static void rs_hangup(struct tty_struct *tty) +{ + /* Stub, once again.. */ +} + +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + /* Stub, once again.. */ +} + +static int rs_proc_show(struct seq_file *m, void *v) +{ + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + return 0; +} + +static const struct tty_operations serial_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .put_char = rs_put_char, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .hangup = rs_hangup, + .wait_until_sent = rs_wait_until_sent, + .proc_show = rs_proc_show, +}; + +int __init rs_init(void) +{ + int ret; + + serial_driver = alloc_tty_driver(SERIAL_MAX_NUM_LINES); + if (!serial_driver) + return -ENOMEM; + + tty_port_init(&serial_port); + + pr_info("%s %s\n", serial_name, serial_version); + + /* Initialize the tty_driver structure */ + + serial_driver->driver_name = "iss_serial"; + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + + tty_set_operations(serial_driver, &serial_ops); + tty_port_link_device(&serial_port, serial_driver, 0); + + ret = tty_register_driver(serial_driver); + if (ret) { + pr_err("Couldn't register serial driver\n"); + tty_driver_kref_put(serial_driver); + tty_port_destroy(&serial_port); + + return ret; + } + + return 0; +} + + +static __exit void rs_exit(void) +{ + int error; + + if ((error = tty_unregister_driver(serial_driver))) + pr_err("ISS_SERIAL: failed to unregister serial driver (%d)\n", + error); + put_tty_driver(serial_driver); + tty_port_destroy(&serial_port); +} + + +/* We use `late_initcall' instead of just `__initcall' as a workaround for + * the fact that (1) simcons_tty_init can't be called before tty_init, + * (2) tty_init is called via `module_init', (3) if statically linked, + * module_init == device_init, and (4) there's no ordering of init lists. + * We can do this easily because simcons is always statically linked, but + * other tty drivers that depend on tty_init and which must use + * `module_init' to declare their init routines are likely to be broken. + */ + +late_initcall(rs_init); + + +#ifdef CONFIG_SERIAL_CONSOLE + +static void iss_console_write(struct console *co, const char *s, unsigned count) +{ + int len = strlen(s); + + if (s != 0 && *s != 0) + simc_write(1, s, count < len ? count : len); +} + +static struct tty_driver* iss_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +static struct console sercons = { + .name = "ttyS", + .write = iss_console_write, + .device = iss_console_device, + .flags = CON_PRINTBUFFER, + .index = -1 +}; + +static int __init iss_console_init(void) +{ + register_console(&sercons); + return 0; +} + +console_initcall(iss_console_init); + +#endif /* CONFIG_SERIAL_CONSOLE */ + diff --git a/arch/xtensa/platforms/iss/include/platform/serial.h b/arch/xtensa/platforms/iss/include/platform/serial.h new file mode 100644 index 000000000..16aec542d --- /dev/null +++ b/arch/xtensa/platforms/iss/include/platform/serial.h @@ -0,0 +1,15 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 Tensilica Inc. + */ + +#ifndef __ASM_XTENSA_ISS_SERIAL_H +#define __ASM_XTENSA_ISS_SERIAL_H + +/* Have no meaning on ISS, but needed for 8250_early.c */ +#define BASE_BAUD 0 + +#endif /* __ASM_XTENSA_ISS_SERIAL_H */ diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h new file mode 100644 index 000000000..2ba45858e --- /dev/null +++ b/arch/xtensa/platforms/iss/include/platform/simcall.h @@ -0,0 +1,142 @@ +/* + * include/asm-xtensa/platform-iss/simcall.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + * Copyright (C) 2017 Cadence Design Systems Inc. + */ + +#ifndef _XTENSA_PLATFORM_ISS_SIMCALL_H +#define _XTENSA_PLATFORM_ISS_SIMCALL_H + + +/* + * System call like services offered by the simulator host. + */ + +#define SYS_nop 0 /* unused */ +#define SYS_exit 1 /*x*/ +#define SYS_fork 2 +#define SYS_read 3 /*x*/ +#define SYS_write 4 /*x*/ +#define SYS_open 5 /*x*/ +#define SYS_close 6 /*x*/ +#define SYS_rename 7 /*x 38 - waitpid */ +#define SYS_creat 8 /*x*/ +#define SYS_link 9 /*x (not implemented on WIN32) */ +#define SYS_unlink 10 /*x*/ +#define SYS_execv 11 /* n/a - execve */ +#define SYS_execve 12 /* 11 - chdir */ +#define SYS_pipe 13 /* 42 - time */ +#define SYS_stat 14 /* 106 - mknod */ +#define SYS_chmod 15 +#define SYS_chown 16 /* 202 - lchown */ +#define SYS_utime 17 /* 30 - break */ +#define SYS_wait 18 /* n/a - oldstat */ +#define SYS_lseek 19 /*x*/ +#define SYS_getpid 20 +#define SYS_isatty 21 /* n/a - mount */ +#define SYS_fstat 22 /* 108 - oldumount */ +#define SYS_time 23 /* 13 - setuid */ +#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */ +#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */ +#define SYS_socket 26 +#define SYS_sendto 27 +#define SYS_recvfrom 28 +#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */ +#define SYS_bind 30 +#define SYS_ioctl 31 + +#define SYS_iss_argc 1000 /* returns value of argc */ +#define SYS_iss_argv_size 1001 /* bytes needed for argv & arg strings */ +#define SYS_iss_set_argv 1002 /* saves argv & arg strings at given addr */ + +/* + * SYS_select_one specifiers + */ + +#define XTISS_SELECT_ONE_READ 1 +#define XTISS_SELECT_ONE_WRITE 2 +#define XTISS_SELECT_ONE_EXCEPT 3 + +static int errno; + +static inline int __simc(int a, int b, int c, int d) +{ + int ret; + register int a1 asm("a2") = a; + register int b1 asm("a3") = b; + register int c1 asm("a4") = c; + register int d1 asm("a5") = d; + __asm__ __volatile__ ( + "simcall\n" + "mov %0, a2\n" + "mov %1, a3\n" + : "=a" (ret), "=a" (errno), "+r"(a1), "+r"(b1) + : "r"(c1), "r"(d1) + : "memory"); + return ret; +} + +static inline int simc_exit(int exit_code) +{ + return __simc(SYS_exit, exit_code, 0, 0); +} + +static inline int simc_open(const char *file, int flags, int mode) +{ + return __simc(SYS_open, (int) file, flags, mode); +} + +static inline int simc_close(int fd) +{ + return __simc(SYS_close, fd, 0, 0); +} + +static inline int simc_ioctl(int fd, int request, void *arg) +{ + return __simc(SYS_ioctl, fd, request, (int) arg); +} + +static inline int simc_read(int fd, void *buf, size_t count) +{ + return __simc(SYS_read, fd, (int) buf, count); +} + +static inline int simc_write(int fd, const void *buf, size_t count) +{ + return __simc(SYS_write, fd, (int) buf, count); +} + +static inline int simc_poll(int fd) +{ + struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; + + return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv); +} + +static inline int simc_lseek(int fd, uint32_t off, int whence) +{ + return __simc(SYS_lseek, fd, off, whence); +} + +static inline int simc_argc(void) +{ + return __simc(SYS_iss_argc, 0, 0, 0); +} + +static inline int simc_argv_size(void) +{ + return __simc(SYS_iss_argv_size, 0, 0, 0); +} + +static inline void simc_argv(void *buf) +{ + __simc(SYS_iss_set_argv, (int)buf, 0, 0); +} + +#endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */ + diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c new file mode 100644 index 000000000..d027dddc4 --- /dev/null +++ b/arch/xtensa/platforms/iss/network.c @@ -0,0 +1,683 @@ +/* + * + * arch/xtensa/platforms/iss/network.c + * + * Platform specific initialization. + * + * Authors: Chris Zankel <chris@zankel.net> + * Based on work form the UML team. + * + * Copyright 2005 Tensilica Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/list.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/if_ether.h> +#include <linux/inetdevice.h> +#include <linux/init.h> +#include <linux/if_tun.h> +#include <linux/etherdevice.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> +#include <linux/bootmem.h> +#include <linux/ethtool.h> +#include <linux/rtnetlink.h> +#include <linux/platform_device.h> + +#include <platform/simcall.h> + +#define DRIVER_NAME "iss-netdev" +#define ETH_MAX_PACKET 1500 +#define ETH_HEADER_OTHER 14 +#define ISS_NET_TIMER_VALUE (HZ / 10) + + +static DEFINE_SPINLOCK(opened_lock); +static LIST_HEAD(opened); + +static DEFINE_SPINLOCK(devices_lock); +static LIST_HEAD(devices); + +/* ------------------------------------------------------------------------- */ + +/* We currently only support the TUNTAP transport protocol. */ + +#define TRANSPORT_TUNTAP_NAME "tuntap" +#define TRANSPORT_TUNTAP_MTU ETH_MAX_PACKET + +struct tuntap_info { + char dev_name[IFNAMSIZ]; + int fd; +}; + +/* ------------------------------------------------------------------------- */ + + +/* This structure contains out private information for the driver. */ + +struct iss_net_private { + struct list_head device_list; + struct list_head opened_list; + + spinlock_t lock; + struct net_device *dev; + struct platform_device pdev; + struct timer_list tl; + struct net_device_stats stats; + + struct timer_list timer; + unsigned int timer_val; + + int index; + int mtu; + + struct { + union { + struct tuntap_info tuntap; + } info; + + int (*open)(struct iss_net_private *lp); + void (*close)(struct iss_net_private *lp); + int (*read)(struct iss_net_private *lp, struct sk_buff **skb); + int (*write)(struct iss_net_private *lp, struct sk_buff **skb); + unsigned short (*protocol)(struct sk_buff *skb); + int (*poll)(struct iss_net_private *lp); + } tp; + +}; + +/* ================================ HELPERS ================================ */ + + +static char *split_if_spec(char *str, ...) +{ + char **arg, *end; + va_list ap; + + va_start(ap, str); + while ((arg = va_arg(ap, char**)) != NULL) { + if (*str == '\0') { + va_end(ap); + return NULL; + } + end = strchr(str, ','); + if (end != str) + *arg = str; + if (end == NULL) { + va_end(ap); + return NULL; + } + *end++ = '\0'; + str = end; + } + va_end(ap); + return str; +} + +/* Set Ethernet address of the specified device. */ + +static void setup_etheraddr(struct net_device *dev, char *str) +{ + unsigned char *addr = dev->dev_addr; + + if (str == NULL) + goto random; + + if (!mac_pton(str, addr)) { + pr_err("%s: failed to parse '%s' as an ethernet address\n", + dev->name, str); + goto random; + } + if (is_multicast_ether_addr(addr)) { + pr_err("%s: attempt to assign a multicast ethernet address\n", + dev->name); + goto random; + } + if (!is_valid_ether_addr(addr)) { + pr_err("%s: attempt to assign an invalid ethernet address\n", + dev->name); + goto random; + } + if (!is_local_ether_addr(addr)) + pr_warn("%s: assigning a globally valid ethernet address\n", + dev->name); + return; + +random: + pr_info("%s: choosing a random ethernet address\n", + dev->name); + eth_hw_addr_random(dev); +} + +/* ======================= TUNTAP TRANSPORT INTERFACE ====================== */ + +static int tuntap_open(struct iss_net_private *lp) +{ + struct ifreq ifr; + char *dev_name = lp->tp.info.tuntap.dev_name; + int err = -EINVAL; + int fd; + + fd = simc_open("/dev/net/tun", 02, 0); /* O_RDWR */ + if (fd < 0) { + pr_err("%s: failed to open /dev/net/tun, returned %d (errno = %d)\n", + lp->dev->name, fd, errno); + return fd; + } + + memset(&ifr, 0, sizeof(ifr)); + ifr.ifr_flags = IFF_TAP | IFF_NO_PI; + strlcpy(ifr.ifr_name, dev_name, sizeof(ifr.ifr_name)); + + err = simc_ioctl(fd, TUNSETIFF, &ifr); + if (err < 0) { + pr_err("%s: failed to set interface %s, returned %d (errno = %d)\n", + lp->dev->name, dev_name, err, errno); + simc_close(fd); + return err; + } + + lp->tp.info.tuntap.fd = fd; + return err; +} + +static void tuntap_close(struct iss_net_private *lp) +{ + simc_close(lp->tp.info.tuntap.fd); + lp->tp.info.tuntap.fd = -1; +} + +static int tuntap_read(struct iss_net_private *lp, struct sk_buff **skb) +{ + return simc_read(lp->tp.info.tuntap.fd, + (*skb)->data, (*skb)->dev->mtu + ETH_HEADER_OTHER); +} + +static int tuntap_write(struct iss_net_private *lp, struct sk_buff **skb) +{ + return simc_write(lp->tp.info.tuntap.fd, (*skb)->data, (*skb)->len); +} + +unsigned short tuntap_protocol(struct sk_buff *skb) +{ + return eth_type_trans(skb, skb->dev); +} + +static int tuntap_poll(struct iss_net_private *lp) +{ + return simc_poll(lp->tp.info.tuntap.fd); +} + +/* + * ethX=tuntap,[mac address],device name + */ + +static int tuntap_probe(struct iss_net_private *lp, int index, char *init) +{ + struct net_device *dev = lp->dev; + char *dev_name = NULL, *mac_str = NULL, *rem = NULL; + + /* Transport should be 'tuntap': ethX=tuntap,mac,dev_name */ + + if (strncmp(init, TRANSPORT_TUNTAP_NAME, + sizeof(TRANSPORT_TUNTAP_NAME) - 1)) + return 0; + + init += sizeof(TRANSPORT_TUNTAP_NAME) - 1; + if (*init == ',') { + rem = split_if_spec(init + 1, &mac_str, &dev_name); + if (rem != NULL) { + pr_err("%s: extra garbage on specification : '%s'\n", + dev->name, rem); + return 0; + } + } else if (*init != '\0') { + pr_err("%s: invalid argument: %s. Skipping device!\n", + dev->name, init); + return 0; + } + + if (!dev_name) { + pr_err("%s: missing tuntap device name\n", dev->name); + return 0; + } + + strlcpy(lp->tp.info.tuntap.dev_name, dev_name, + sizeof(lp->tp.info.tuntap.dev_name)); + + setup_etheraddr(dev, mac_str); + + lp->mtu = TRANSPORT_TUNTAP_MTU; + + lp->tp.info.tuntap.fd = -1; + + lp->tp.open = tuntap_open; + lp->tp.close = tuntap_close; + lp->tp.read = tuntap_read; + lp->tp.write = tuntap_write; + lp->tp.protocol = tuntap_protocol; + lp->tp.poll = tuntap_poll; + + return 1; +} + +/* ================================ ISS NET ================================ */ + +static int iss_net_rx(struct net_device *dev) +{ + struct iss_net_private *lp = netdev_priv(dev); + int pkt_len; + struct sk_buff *skb; + + /* Check if there is any new data. */ + + if (lp->tp.poll(lp) == 0) + return 0; + + /* Try to allocate memory, if it fails, try again next round. */ + + skb = dev_alloc_skb(dev->mtu + 2 + ETH_HEADER_OTHER); + if (skb == NULL) { + lp->stats.rx_dropped++; + return 0; + } + + skb_reserve(skb, 2); + + /* Setup skb */ + + skb->dev = dev; + skb_reset_mac_header(skb); + pkt_len = lp->tp.read(lp, &skb); + skb_put(skb, pkt_len); + + if (pkt_len > 0) { + skb_trim(skb, pkt_len); + skb->protocol = lp->tp.protocol(skb); + + lp->stats.rx_bytes += skb->len; + lp->stats.rx_packets++; + netif_rx_ni(skb); + return pkt_len; + } + kfree_skb(skb); + return pkt_len; +} + +static int iss_net_poll(void) +{ + struct list_head *ele; + int err, ret = 0; + + spin_lock(&opened_lock); + + list_for_each(ele, &opened) { + struct iss_net_private *lp; + + lp = list_entry(ele, struct iss_net_private, opened_list); + + if (!netif_running(lp->dev)) + break; + + spin_lock(&lp->lock); + + while ((err = iss_net_rx(lp->dev)) > 0) + ret++; + + spin_unlock(&lp->lock); + + if (err < 0) { + pr_err("Device '%s' read returned %d, shutting it down\n", + lp->dev->name, err); + dev_close(lp->dev); + } else { + /* FIXME reactivate_fd(lp->fd, ISS_ETH_IRQ); */ + } + } + + spin_unlock(&opened_lock); + return ret; +} + + +static void iss_net_timer(struct timer_list *t) +{ + struct iss_net_private *lp = from_timer(lp, t, timer); + + iss_net_poll(); + spin_lock(&lp->lock); + mod_timer(&lp->timer, jiffies + lp->timer_val); + spin_unlock(&lp->lock); +} + + +static int iss_net_open(struct net_device *dev) +{ + struct iss_net_private *lp = netdev_priv(dev); + int err; + + spin_lock_bh(&lp->lock); + + err = lp->tp.open(lp); + if (err < 0) + goto out; + + netif_start_queue(dev); + + /* clear buffer - it can happen that the host side of the interface + * is full when we get here. In this case, new data is never queued, + * SIGIOs never arrive, and the net never works. + */ + while ((err = iss_net_rx(dev)) > 0) + ; + + spin_unlock_bh(&lp->lock); + spin_lock_bh(&opened_lock); + list_add(&lp->opened_list, &opened); + spin_unlock_bh(&opened_lock); + spin_lock_bh(&lp->lock); + + timer_setup(&lp->timer, iss_net_timer, 0); + lp->timer_val = ISS_NET_TIMER_VALUE; + mod_timer(&lp->timer, jiffies + lp->timer_val); + +out: + spin_unlock_bh(&lp->lock); + return err; +} + +static int iss_net_close(struct net_device *dev) +{ + struct iss_net_private *lp = netdev_priv(dev); + netif_stop_queue(dev); + spin_lock_bh(&lp->lock); + + spin_lock(&opened_lock); + list_del(&opened); + spin_unlock(&opened_lock); + + del_timer_sync(&lp->timer); + + lp->tp.close(lp); + + spin_unlock_bh(&lp->lock); + return 0; +} + +static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct iss_net_private *lp = netdev_priv(dev); + int len; + + netif_stop_queue(dev); + spin_lock_bh(&lp->lock); + + len = lp->tp.write(lp, &skb); + + if (len == skb->len) { + lp->stats.tx_packets++; + lp->stats.tx_bytes += skb->len; + netif_trans_update(dev); + netif_start_queue(dev); + + /* this is normally done in the interrupt when tx finishes */ + netif_wake_queue(dev); + + } else if (len == 0) { + netif_start_queue(dev); + lp->stats.tx_dropped++; + + } else { + netif_start_queue(dev); + pr_err("%s: %s failed(%d)\n", dev->name, __func__, len); + } + + spin_unlock_bh(&lp->lock); + + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + + +static struct net_device_stats *iss_net_get_stats(struct net_device *dev) +{ + struct iss_net_private *lp = netdev_priv(dev); + return &lp->stats; +} + +static void iss_net_set_multicast_list(struct net_device *dev) +{ +} + +static void iss_net_tx_timeout(struct net_device *dev) +{ +} + +static int iss_net_set_mac(struct net_device *dev, void *addr) +{ + struct iss_net_private *lp = netdev_priv(dev); + struct sockaddr *hwaddr = addr; + + if (!is_valid_ether_addr(hwaddr->sa_data)) + return -EADDRNOTAVAIL; + spin_lock_bh(&lp->lock); + memcpy(dev->dev_addr, hwaddr->sa_data, ETH_ALEN); + spin_unlock_bh(&lp->lock); + return 0; +} + +static int iss_net_change_mtu(struct net_device *dev, int new_mtu) +{ + return -EINVAL; +} + +void iss_net_user_timer_expire(struct timer_list *unused) +{ +} + + +static struct platform_driver iss_net_driver = { + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int driver_registered; + +static const struct net_device_ops iss_netdev_ops = { + .ndo_open = iss_net_open, + .ndo_stop = iss_net_close, + .ndo_get_stats = iss_net_get_stats, + .ndo_start_xmit = iss_net_start_xmit, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = iss_net_change_mtu, + .ndo_set_mac_address = iss_net_set_mac, + .ndo_tx_timeout = iss_net_tx_timeout, + .ndo_set_rx_mode = iss_net_set_multicast_list, +}; + +static int iss_net_configure(int index, char *init) +{ + struct net_device *dev; + struct iss_net_private *lp; + int err; + + dev = alloc_etherdev(sizeof(*lp)); + if (dev == NULL) { + pr_err("eth_configure: failed to allocate device\n"); + return 1; + } + + /* Initialize private element. */ + + lp = netdev_priv(dev); + *lp = (struct iss_net_private) { + .device_list = LIST_HEAD_INIT(lp->device_list), + .opened_list = LIST_HEAD_INIT(lp->opened_list), + .dev = dev, + .index = index, + }; + + spin_lock_init(&lp->lock); + /* + * If this name ends up conflicting with an existing registered + * netdevice, that is OK, register_netdev{,ice}() will notice this + * and fail. + */ + snprintf(dev->name, sizeof(dev->name), "eth%d", index); + + /* + * Try all transport protocols. + * Note: more protocols can be added by adding '&& !X_init(lp, eth)'. + */ + + if (!tuntap_probe(lp, index, init)) { + pr_err("%s: invalid arguments. Skipping device!\n", + dev->name); + goto errout; + } + + pr_info("Netdevice %d (%pM)\n", index, dev->dev_addr); + + /* sysfs register */ + + if (!driver_registered) { + platform_driver_register(&iss_net_driver); + driver_registered = 1; + } + + spin_lock(&devices_lock); + list_add(&lp->device_list, &devices); + spin_unlock(&devices_lock); + + lp->pdev.id = index; + lp->pdev.name = DRIVER_NAME; + platform_device_register(&lp->pdev); + SET_NETDEV_DEV(dev, &lp->pdev.dev); + + dev->netdev_ops = &iss_netdev_ops; + dev->mtu = lp->mtu; + dev->watchdog_timeo = (HZ >> 1); + dev->irq = -1; + + rtnl_lock(); + err = register_netdevice(dev); + rtnl_unlock(); + + if (err) { + pr_err("%s: error registering net device!\n", dev->name); + /* XXX: should we call ->remove() here? */ + free_netdev(dev); + return 1; + } + + timer_setup(&lp->tl, iss_net_user_timer_expire, 0); + + return 0; + +errout: + /* FIXME: unregister; free, etc.. */ + return -EIO; +} + +/* ------------------------------------------------------------------------- */ + +/* Filled in during early boot */ + +struct list_head eth_cmd_line = LIST_HEAD_INIT(eth_cmd_line); + +struct iss_net_init { + struct list_head list; + char *init; /* init string */ + int index; +}; + +/* + * Parse the command line and look for 'ethX=...' fields, and register all + * those fields. They will be later initialized in iss_net_init. + */ + +static int __init iss_net_setup(char *str) +{ + struct iss_net_private *device = NULL; + struct iss_net_init *new; + struct list_head *ele; + char *end; + int rc; + unsigned n; + + end = strchr(str, '='); + if (!end) { + pr_err("Expected '=' after device number\n"); + return 1; + } + *end = 0; + rc = kstrtouint(str, 0, &n); + *end = '='; + if (rc < 0) { + pr_err("Failed to parse '%s'\n", str); + return 1; + } + str = end; + + spin_lock(&devices_lock); + + list_for_each(ele, &devices) { + device = list_entry(ele, struct iss_net_private, device_list); + if (device->index == n) + break; + } + + spin_unlock(&devices_lock); + + if (device && device->index == n) { + pr_err("Device %u already configured\n", n); + return 1; + } + + new = alloc_bootmem(sizeof(*new)); + if (new == NULL) { + pr_err("Alloc_bootmem failed\n"); + return 1; + } + + INIT_LIST_HEAD(&new->list); + new->index = n; + new->init = str + 1; + + list_add_tail(&new->list, ð_cmd_line); + return 1; +} + +__setup("eth", iss_net_setup); + +/* + * Initialize all ISS Ethernet devices previously registered in iss_net_setup. + */ + +static int iss_net_init(void) +{ + struct list_head *ele, *next; + + /* Walk through all Ethernet devices specified in the command line. */ + + list_for_each_safe(ele, next, ð_cmd_line) { + struct iss_net_init *eth; + eth = list_entry(ele, struct iss_net_init, list); + iss_net_configure(eth->index, eth->init); + } + + return 1; +} +device_initcall(iss_net_init); diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c new file mode 100644 index 000000000..58709e89a --- /dev/null +++ b/arch/xtensa/platforms/iss/setup.c @@ -0,0 +1,106 @@ +/* + * + * arch/xtensa/platform-iss/setup.c + * + * Platform specific initialization. + * + * Authors: Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com> + * + * Copyright 2001 - 2005 Tensilica Inc. + * Copyright 2017 Cadence Design Systems Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/bootmem.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/stringify.h> +#include <linux/notifier.h> + +#include <asm/platform.h> +#include <asm/bootparam.h> +#include <asm/setup.h> + +#include <platform/simcall.h> + + +void __init platform_init(bp_tag_t* bootparam) +{ +} + +void platform_halt(void) +{ + pr_info(" ** Called platform_halt() **\n"); + simc_exit(0); +} + +void platform_power_off(void) +{ + pr_info(" ** Called platform_power_off() **\n"); + simc_exit(0); +} +void platform_restart(void) +{ + /* Flush and reset the mmu, simulate a processor reset, and + * jump to the reset vector. */ + cpu_reset(); + /* control never gets here */ +} + +void platform_heartbeat(void) +{ +} + +static int +iss_panic_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + simc_exit(1); + return NOTIFY_DONE; +} + +static struct notifier_block iss_panic_block = { + .notifier_call = iss_panic_event, +}; + +void __init platform_setup(char **p_cmdline) +{ + static void *argv[COMMAND_LINE_SIZE / sizeof(void *)] __initdata; + static char cmdline[COMMAND_LINE_SIZE] __initdata; + int argc = simc_argc(); + int argv_size = simc_argv_size(); + + if (argc > 1) { + if (argv_size > sizeof(argv)) { + pr_err("%s: command line too long: argv_size = %d\n", + __func__, argv_size); + } else { + int i; + + cmdline[0] = 0; + simc_argv((void *)argv); + + for (i = 1; i < argc; ++i) { + if (i > 1) + strcat(cmdline, " "); + strcat(cmdline, argv[i]); + } + *p_cmdline = cmdline; + } + } + + atomic_notifier_chain_register(&panic_notifier_list, &iss_panic_block); +} diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c new file mode 100644 index 000000000..026211e7a --- /dev/null +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -0,0 +1,372 @@ +/* + * arch/xtensa/platforms/iss/simdisk.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001-2013 Tensilica Inc. + * Authors Victor Prupis + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/blkdev.h> +#include <linux/bio.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> +#include <platform/simcall.h> + +#define SIMDISK_MAJOR 240 +#define SIMDISK_MINORS 1 +#define MAX_SIMDISK_COUNT 10 + +struct simdisk { + const char *filename; + spinlock_t lock; + struct request_queue *queue; + struct gendisk *gd; + struct proc_dir_entry *procfile; + int users; + unsigned long size; + int fd; +}; + + +static int simdisk_count = CONFIG_BLK_DEV_SIMDISK_COUNT; +module_param(simdisk_count, int, S_IRUGO); +MODULE_PARM_DESC(simdisk_count, "Number of simdisk units."); + +static int n_files; +static const char *filename[MAX_SIMDISK_COUNT] = { +#ifdef CONFIG_SIMDISK0_FILENAME + CONFIG_SIMDISK0_FILENAME, +#ifdef CONFIG_SIMDISK1_FILENAME + CONFIG_SIMDISK1_FILENAME, +#endif +#endif +}; + +static int simdisk_param_set_filename(const char *val, + const struct kernel_param *kp) +{ + if (n_files < ARRAY_SIZE(filename)) + filename[n_files++] = val; + else + return -EINVAL; + return 0; +} + +static const struct kernel_param_ops simdisk_param_ops_filename = { + .set = simdisk_param_set_filename, +}; +module_param_cb(filename, &simdisk_param_ops_filename, &n_files, 0); +MODULE_PARM_DESC(filename, "Backing storage filename."); + +static int simdisk_major = SIMDISK_MAJOR; + +static void simdisk_transfer(struct simdisk *dev, unsigned long sector, + unsigned long nsect, char *buffer, int write) +{ + unsigned long offset = sector << SECTOR_SHIFT; + unsigned long nbytes = nsect << SECTOR_SHIFT; + + if (offset > dev->size || dev->size - offset < nbytes) { + pr_notice("Beyond-end %s (%ld %ld)\n", + write ? "write" : "read", offset, nbytes); + return; + } + + spin_lock(&dev->lock); + while (nbytes > 0) { + unsigned long io; + + simc_lseek(dev->fd, offset, SEEK_SET); + READ_ONCE(*buffer); + if (write) + io = simc_write(dev->fd, buffer, nbytes); + else + io = simc_read(dev->fd, buffer, nbytes); + if (io == -1) { + pr_err("SIMDISK: IO error %d\n", errno); + break; + } + buffer += io; + offset += io; + nbytes -= io; + } + spin_unlock(&dev->lock); +} + +static blk_qc_t simdisk_make_request(struct request_queue *q, struct bio *bio) +{ + struct simdisk *dev = q->queuedata; + struct bio_vec bvec; + struct bvec_iter iter; + sector_t sector = bio->bi_iter.bi_sector; + + bio_for_each_segment(bvec, bio, iter) { + char *buffer = kmap_atomic(bvec.bv_page) + bvec.bv_offset; + unsigned len = bvec.bv_len >> SECTOR_SHIFT; + + simdisk_transfer(dev, sector, len, buffer, + bio_data_dir(bio) == WRITE); + sector += len; + kunmap_atomic(buffer); + } + + bio_endio(bio); + return BLK_QC_T_NONE; +} + +static int simdisk_open(struct block_device *bdev, fmode_t mode) +{ + struct simdisk *dev = bdev->bd_disk->private_data; + + spin_lock(&dev->lock); + if (!dev->users) + check_disk_change(bdev); + ++dev->users; + spin_unlock(&dev->lock); + return 0; +} + +static void simdisk_release(struct gendisk *disk, fmode_t mode) +{ + struct simdisk *dev = disk->private_data; + spin_lock(&dev->lock); + --dev->users; + spin_unlock(&dev->lock); +} + +static const struct block_device_operations simdisk_ops = { + .owner = THIS_MODULE, + .open = simdisk_open, + .release = simdisk_release, +}; + +static struct simdisk *sddev; +static struct proc_dir_entry *simdisk_procdir; + +static int simdisk_attach(struct simdisk *dev, const char *filename) +{ + int err = 0; + + filename = kstrdup(filename, GFP_KERNEL); + if (filename == NULL) + return -ENOMEM; + + spin_lock(&dev->lock); + + if (dev->fd != -1) { + err = -EBUSY; + goto out; + } + dev->fd = simc_open(filename, O_RDWR, 0); + if (dev->fd == -1) { + pr_err("SIMDISK: Can't open %s: %d\n", filename, errno); + err = -ENODEV; + goto out; + } + dev->size = simc_lseek(dev->fd, 0, SEEK_END); + set_capacity(dev->gd, dev->size >> SECTOR_SHIFT); + dev->filename = filename; + pr_info("SIMDISK: %s=%s\n", dev->gd->disk_name, dev->filename); +out: + if (err) + kfree(filename); + spin_unlock(&dev->lock); + + return err; +} + +static int simdisk_detach(struct simdisk *dev) +{ + int err = 0; + + spin_lock(&dev->lock); + + if (dev->users != 0) { + err = -EBUSY; + } else if (dev->fd != -1) { + if (simc_close(dev->fd)) { + pr_err("SIMDISK: error closing %s: %d\n", + dev->filename, errno); + err = -EIO; + } else { + pr_info("SIMDISK: %s detached from %s\n", + dev->gd->disk_name, dev->filename); + dev->fd = -1; + kfree(dev->filename); + dev->filename = NULL; + } + } + spin_unlock(&dev->lock); + return err; +} + +static ssize_t proc_read_simdisk(struct file *file, char __user *buf, + size_t size, loff_t *ppos) +{ + struct simdisk *dev = PDE_DATA(file_inode(file)); + const char *s = dev->filename; + if (s) { + ssize_t n = simple_read_from_buffer(buf, size, ppos, + s, strlen(s)); + if (n < 0) + return n; + buf += n; + size -= n; + } + return simple_read_from_buffer(buf, size, ppos, "\n", 1); +} + +static ssize_t proc_write_simdisk(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + char *tmp = memdup_user_nul(buf, count); + struct simdisk *dev = PDE_DATA(file_inode(file)); + int err; + + if (IS_ERR(tmp)) + return PTR_ERR(tmp); + + err = simdisk_detach(dev); + if (err != 0) + goto out_free; + + if (count > 0 && tmp[count - 1] == '\n') + tmp[count - 1] = 0; + + if (tmp[0]) + err = simdisk_attach(dev, tmp); + + if (err == 0) + err = count; +out_free: + kfree(tmp); + return err; +} + +static const struct file_operations fops = { + .read = proc_read_simdisk, + .write = proc_write_simdisk, + .llseek = default_llseek, +}; + +static int __init simdisk_setup(struct simdisk *dev, int which, + struct proc_dir_entry *procdir) +{ + char tmp[2] = { '0' + which, 0 }; + + dev->fd = -1; + dev->filename = NULL; + spin_lock_init(&dev->lock); + dev->users = 0; + + dev->queue = blk_alloc_queue(GFP_KERNEL); + if (dev->queue == NULL) { + pr_err("blk_alloc_queue failed\n"); + goto out_alloc_queue; + } + + blk_queue_make_request(dev->queue, simdisk_make_request); + dev->queue->queuedata = dev; + + dev->gd = alloc_disk(SIMDISK_MINORS); + if (dev->gd == NULL) { + pr_err("alloc_disk failed\n"); + goto out_alloc_disk; + } + dev->gd->major = simdisk_major; + dev->gd->first_minor = which; + dev->gd->fops = &simdisk_ops; + dev->gd->queue = dev->queue; + dev->gd->private_data = dev; + snprintf(dev->gd->disk_name, 32, "simdisk%d", which); + set_capacity(dev->gd, 0); + add_disk(dev->gd); + + dev->procfile = proc_create_data(tmp, 0644, procdir, &fops, dev); + return 0; + +out_alloc_disk: + blk_cleanup_queue(dev->queue); + dev->queue = NULL; +out_alloc_queue: + simc_close(dev->fd); + return -EIO; +} + +static int __init simdisk_init(void) +{ + int i; + + if (register_blkdev(simdisk_major, "simdisk") < 0) { + pr_err("SIMDISK: register_blkdev: %d\n", simdisk_major); + return -EIO; + } + pr_info("SIMDISK: major: %d\n", simdisk_major); + + if (n_files > simdisk_count) + simdisk_count = n_files; + if (simdisk_count > MAX_SIMDISK_COUNT) + simdisk_count = MAX_SIMDISK_COUNT; + + sddev = kmalloc_array(simdisk_count, sizeof(*sddev), GFP_KERNEL); + if (sddev == NULL) + goto out_unregister; + + simdisk_procdir = proc_mkdir("simdisk", 0); + if (simdisk_procdir == NULL) + goto out_free_unregister; + + for (i = 0; i < simdisk_count; ++i) { + if (simdisk_setup(sddev + i, i, simdisk_procdir) == 0) { + if (filename[i] != NULL && filename[i][0] != 0 && + (n_files == 0 || i < n_files)) + simdisk_attach(sddev + i, filename[i]); + } + } + + return 0; + +out_free_unregister: + kfree(sddev); +out_unregister: + unregister_blkdev(simdisk_major, "simdisk"); + return -ENOMEM; +} +module_init(simdisk_init); + +static void simdisk_teardown(struct simdisk *dev, int which, + struct proc_dir_entry *procdir) +{ + char tmp[2] = { '0' + which, 0 }; + + simdisk_detach(dev); + if (dev->gd) + del_gendisk(dev->gd); + if (dev->queue) + blk_cleanup_queue(dev->queue); + remove_proc_entry(tmp, procdir); +} + +static void __exit simdisk_exit(void) +{ + int i; + + for (i = 0; i < simdisk_count; ++i) + simdisk_teardown(sddev + i, i, simdisk_procdir); + remove_proc_entry("simdisk", 0); + kfree(sddev); + unregister_blkdev(simdisk_major, "simdisk"); +} +module_exit(simdisk_exit); + +MODULE_ALIAS_BLOCKDEV_MAJOR(SIMDISK_MAJOR); + +MODULE_LICENSE("GPL"); diff --git a/arch/xtensa/platforms/xt2000/Makefile b/arch/xtensa/platforms/xt2000/Makefile new file mode 100644 index 000000000..54d018e45 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Tensilica XT2000 Emulation Board +# + +obj-y = setup.o diff --git a/arch/xtensa/platforms/xt2000/include/platform/hardware.h b/arch/xtensa/platforms/xt2000/include/platform/hardware.h new file mode 100644 index 000000000..8e5e0d6a8 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/include/platform/hardware.h @@ -0,0 +1,43 @@ +/* + * platform/hardware.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +/* + * This file contains the hardware configuration of the XT2000 board. + */ + +#ifndef _XTENSA_XT2000_HARDWARE_H +#define _XTENSA_XT2000_HARDWARE_H + +#include <variant/core.h> + +/* + * On-board components. + */ + +#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM +#define SONIC83934_ADDR IOADDR(0x0d030000) + +/* + * V3-PCI + */ + +/* The XT2000 uses the V3 as a cascaded interrupt controller for the PCI bus */ + +#define IRQ_PCI_A (XCHAL_NUM_INTERRUPTS + 0) +#define IRQ_PCI_B (XCHAL_NUM_INTERRUPTS + 1) +#define IRQ_PCI_C (XCHAL_NUM_INTERRUPTS + 2) + +/* + * Various other components. + */ + +#define XT2000_LED_ADDR IOADDR(0x0d040000) + +#endif /* _XTENSA_XT2000_HARDWARE_H */ diff --git a/arch/xtensa/platforms/xt2000/include/platform/serial.h b/arch/xtensa/platforms/xt2000/include/platform/serial.h new file mode 100644 index 000000000..7226cf732 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/include/platform/serial.h @@ -0,0 +1,28 @@ +/* + * platform/serial.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_XT2000_SERIAL_H +#define _XTENSA_XT2000_SERIAL_H + +#include <variant/core.h> +#include <asm/io.h> + +/* National-Semi PC16552D DUART: */ + +#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM +#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM + +#define DUART16552_1_ADDR IOADDR(0x0d050020) /* channel 1 */ +#define DUART16552_2_ADDR IOADDR(0x0d050000) /* channel 2 */ + +#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */ +#define BASE_BAUD ( DUART16552_XTAL_FREQ / 16 ) + +#endif /* _XTENSA_XT2000_SERIAL_H */ diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c new file mode 100644 index 000000000..9c2f1fb96 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -0,0 +1,155 @@ +/* + * arch/xtensa/platforms/xt2000/setup.c + * + * Platform specific functions for the XT2000 board. + * + * Authors: Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com> + * + * Copyright 2001 - 2004 Tensilica Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/stringify.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include <asm/processor.h> +#include <asm/platform.h> +#include <asm/bootparam.h> +#include <platform/hardware.h> +#include <platform/serial.h> + +/* Assumes s points to an 8-chr string. No checking for NULL. */ + +static void led_print (int f, char *s) +{ + unsigned long* led_addr = (unsigned long*) (XT2000_LED_ADDR + 0xE0) + f; + int i; + for (i = f; i < 8; i++) + if ((*led_addr++ = *s++) == 0) + break; +} + +void platform_halt(void) +{ + led_print (0, " HALT "); + local_irq_disable(); + while (1); +} + +void platform_power_off(void) +{ + led_print (0, "POWEROFF"); + local_irq_disable(); + while (1); +} + +void platform_restart(void) +{ + /* Flush and reset the mmu, simulate a processor reset, and + * jump to the reset vector. */ + cpu_reset(); + /* control never gets here */ +} + +void __init platform_setup(char** cmdline) +{ + led_print (0, "LINUX "); +} + +/* early initialization */ + +void __init platform_init(bp_tag_t *first) +{ +} + +/* Heartbeat. Let the LED blink. */ + +void platform_heartbeat(void) +{ + static int i=0, t = 0; + + if (--t < 0) + { + t = 59; + led_print(7, i ? ".": " "); + i ^= 1; + } +} + +//#define RS_TABLE_SIZE 2 + +#define _SERIAL_PORT(_base,_irq) \ +{ \ + .mapbase = (_base), \ + .membase = (void*)(_base), \ + .irq = (_irq), \ + .uartclk = DUART16552_XTAL_FREQ, \ + .iotype = UPIO_MEM, \ + .flags = UPF_BOOT_AUTOCONF, \ + .regshift = 2, \ +} + +static struct plat_serial8250_port xt2000_serial_data[] = { +#if XCHAL_HAVE_BE + _SERIAL_PORT(DUART16552_1_ADDR + 3, DUART16552_1_INTNUM), + _SERIAL_PORT(DUART16552_2_ADDR + 3, DUART16552_2_INTNUM), +#else + _SERIAL_PORT(DUART16552_1_ADDR, DUART16552_1_INTNUM), + _SERIAL_PORT(DUART16552_2_ADDR, DUART16552_2_INTNUM), +#endif + { } +}; + +static struct platform_device xt2000_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = xt2000_serial_data, + }, +}; + +static struct resource xt2000_sonic_res[] = { + { + .start = SONIC83934_ADDR, + .end = SONIC83934_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = SONIC83934_INTNUM, + .end = SONIC83934_INTNUM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device xt2000_sonic_device = { + .name = "xtsonic", + .num_resources = ARRAY_SIZE(xt2000_sonic_res), + .resource = xt2000_sonic_res, +}; + +static int __init xt2000_setup_devinit(void) +{ + platform_device_register(&xt2000_serial8250_device); + platform_device_register(&xt2000_sonic_device); + + return 0; +} + +device_initcall(xt2000_setup_devinit); diff --git a/arch/xtensa/platforms/xtfpga/Makefile b/arch/xtensa/platforms/xtfpga/Makefile new file mode 100644 index 000000000..7839d38b2 --- /dev/null +++ b/arch/xtensa/platforms/xtfpga/Makefile @@ -0,0 +1,10 @@ +# Makefile for the Tensilica xtavnet Emulation Board +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definitions are in the main makefile... + +obj-y += setup.o +obj-$(CONFIG_XTFPGA_LCD) += lcd.o diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h new file mode 100644 index 000000000..30d9cb6cf --- /dev/null +++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h @@ -0,0 +1,60 @@ +/* + * arch/xtensa/platform/xtavnet/include/platform/hardware.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Tensilica Inc. + */ + +/* + * This file contains the hardware configuration of the XTAVNET boards. + */ + +#include <asm/types.h> + +#ifndef __XTENSA_XTAVNET_HARDWARE_H +#define __XTENSA_XTAVNET_HARDWARE_H + +/* Default assignment of LX60 devices to external interrupts. */ + +#ifdef CONFIG_XTENSA_MX +#define DUART16552_INTNUM XCHAL_EXTINT3_NUM +#define OETH_IRQ XCHAL_EXTINT4_NUM +#define C67X00_IRQ XCHAL_EXTINT8_NUM +#else +#define DUART16552_INTNUM XCHAL_EXTINT0_NUM +#define OETH_IRQ XCHAL_EXTINT1_NUM +#define C67X00_IRQ XCHAL_EXTINT5_NUM +#endif + +/* + * Device addresses and parameters. + */ + +/* UART */ +#define DUART16552_PADDR (XCHAL_KIO_PADDR + 0x0D050020) + +/* Misc. */ +#define XTFPGA_FPGAREGS_VADDR IOADDR(0x0D020000) +/* Clock frequency in Hz (read-only): */ +#define XTFPGA_CLKFRQ_VADDR (XTFPGA_FPGAREGS_VADDR + 0x04) +/* Setting of 8 DIP switches: */ +#define DIP_SWITCHES_VADDR (XTFPGA_FPGAREGS_VADDR + 0x0C) +/* Software reset (write 0xdead): */ +#define XTFPGA_SWRST_VADDR (XTFPGA_FPGAREGS_VADDR + 0x10) + +/* OpenCores Ethernet controller: */ + /* regs + RX/TX descriptors */ +#define OETH_REGS_PADDR (XCHAL_KIO_PADDR + 0x0D030000) +#define OETH_REGS_SIZE 0x1000 +#define OETH_SRAMBUFF_PADDR (XCHAL_KIO_PADDR + 0x0D800000) + + /* 5*rx buffs + 5*tx buffs */ +#define OETH_SRAMBUFF_SIZE (5 * 0x600 + 5 * 0x600) + +#define C67X00_PADDR (XCHAL_KIO_PADDR + 0x0D0D0000) +#define C67X00_SIZE 0x10 + +#endif /* __XTENSA_XTAVNET_HARDWARE_H */ diff --git a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h new file mode 100644 index 000000000..4c8541ed1 --- /dev/null +++ b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h @@ -0,0 +1,35 @@ +/* + * arch/xtensa/platform/xtavnet/include/platform/lcd.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001, 2006 Tensilica Inc. + */ + +#ifndef __XTENSA_XTAVNET_LCD_H +#define __XTENSA_XTAVNET_LCD_H + +#ifdef CONFIG_XTFPGA_LCD +/* Display string STR at position POS on the LCD. */ +void lcd_disp_at_pos(char *str, unsigned char pos); + +/* Shift the contents of the LCD display left or right. */ +void lcd_shiftleft(void); +void lcd_shiftright(void); +#else +static inline void lcd_disp_at_pos(char *str, unsigned char pos) +{ +} + +static inline void lcd_shiftleft(void) +{ +} + +static inline void lcd_shiftright(void) +{ +} +#endif + +#endif diff --git a/arch/xtensa/platforms/xtfpga/include/platform/serial.h b/arch/xtensa/platforms/xtfpga/include/platform/serial.h new file mode 100644 index 000000000..14d8f7bee --- /dev/null +++ b/arch/xtensa/platforms/xtfpga/include/platform/serial.h @@ -0,0 +1,18 @@ +/* + * arch/xtensa/platform/xtavnet/include/platform/serial.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001, 2006 Tensilica Inc. + */ + +#ifndef __ASM_XTENSA_XTAVNET_SERIAL_H +#define __ASM_XTENSA_XTAVNET_SERIAL_H + +#include <platform/hardware.h> + +#define BASE_BAUD (*(long *)XTFPGA_CLKFRQ_VADDR / 16) + +#endif /* __ASM_XTENSA_XTAVNET_SERIAL_H */ diff --git a/arch/xtensa/platforms/xtfpga/lcd.c b/arch/xtensa/platforms/xtfpga/lcd.c new file mode 100644 index 000000000..2f7eb66c2 --- /dev/null +++ b/arch/xtensa/platforms/xtfpga/lcd.c @@ -0,0 +1,89 @@ +/* + * Driver for the LCD display on the Tensilica XTFPGA board family. + * http://www.mytechcorp.com/cfdata/productFile/File1/MOC-16216B-B-A0A04.pdf + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001, 2006 Tensilica Inc. + * Copyright (C) 2015 Cadence Design Systems Inc. + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <platform/hardware.h> +#include <platform/lcd.h> + +/* LCD instruction and data addresses. */ +#define LCD_INSTR_ADDR ((char *)IOADDR(CONFIG_XTFPGA_LCD_BASE_ADDR)) +#define LCD_DATA_ADDR (LCD_INSTR_ADDR + 4) + +#define LCD_CLEAR 0x1 +#define LCD_DISPLAY_ON 0xc + +/* 8bit and 2 lines display */ +#define LCD_DISPLAY_MODE8BIT 0x38 +#define LCD_DISPLAY_MODE4BIT 0x28 +#define LCD_DISPLAY_POS 0x80 +#define LCD_SHIFT_LEFT 0x18 +#define LCD_SHIFT_RIGHT 0x1c + +static void lcd_put_byte(u8 *addr, u8 data) +{ +#ifdef CONFIG_XTFPGA_LCD_8BIT_ACCESS + WRITE_ONCE(*addr, data); +#else + WRITE_ONCE(*addr, data & 0xf0); + WRITE_ONCE(*addr, (data << 4) & 0xf0); +#endif +} + +static int __init lcd_init(void) +{ + WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE8BIT); + mdelay(5); + WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE8BIT); + udelay(200); + WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE8BIT); + udelay(50); +#ifndef CONFIG_XTFPGA_LCD_8BIT_ACCESS + WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE4BIT); + udelay(50); + lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_MODE4BIT); + udelay(50); +#endif + lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_ON); + udelay(50); + lcd_put_byte(LCD_INSTR_ADDR, LCD_CLEAR); + mdelay(10); + lcd_disp_at_pos("XTENSA LINUX", 0); + return 0; +} + +void lcd_disp_at_pos(char *str, unsigned char pos) +{ + lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_POS | pos); + udelay(100); + while (*str != 0) { + lcd_put_byte(LCD_DATA_ADDR, *str); + udelay(200); + str++; + } +} + +void lcd_shiftleft(void) +{ + lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_LEFT); + udelay(50); +} + +void lcd_shiftright(void) +{ + lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_RIGHT); + udelay(50); +} + +arch_initcall(lcd_init); diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c new file mode 100644 index 000000000..db5122765 --- /dev/null +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -0,0 +1,310 @@ +/* + * + * arch/xtensa/platform/xtavnet/setup.c + * + * ... + * + * Authors: Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com> + * + * Copyright 2001 - 2006 Tensilica Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> + +#include <asm/timex.h> +#include <asm/processor.h> +#include <asm/platform.h> +#include <asm/bootparam.h> +#include <platform/lcd.h> +#include <platform/hardware.h> + +void platform_halt(void) +{ + lcd_disp_at_pos(" HALT ", 0); + local_irq_disable(); + while (1) + cpu_relax(); +} + +void platform_power_off(void) +{ + lcd_disp_at_pos("POWEROFF", 0); + local_irq_disable(); + while (1) + cpu_relax(); +} + +void platform_restart(void) +{ + /* Try software reset first. */ + WRITE_ONCE(*(u32 *)XTFPGA_SWRST_VADDR, 0xdead); + + /* If software reset did not work, flush and reset the mmu, + * simulate a processor reset, and jump to the reset vector. + */ + cpu_reset(); + /* control never gets here */ +} + +void __init platform_setup(char **cmdline) +{ +} + +/* early initialization */ + +void __init platform_init(bp_tag_t *first) +{ +} + +/* Heartbeat. */ + +void platform_heartbeat(void) +{ +} + +#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT + +void __init platform_calibrate_ccount(void) +{ + ccount_freq = *(long *)XTFPGA_CLKFRQ_VADDR; +} + +#endif + +#ifdef CONFIG_USE_OF + +static void __init xtfpga_clk_setup(struct device_node *np) +{ + void __iomem *base = of_iomap(np, 0); + struct clk *clk; + u32 freq; + + if (!base) { + pr_err("%s: invalid address\n", np->name); + return; + } + + freq = __raw_readl(base); + iounmap(base); + clk = clk_register_fixed_rate(NULL, np->name, NULL, 0, freq); + + if (IS_ERR(clk)) { + pr_err("%s: clk registration failed\n", np->name); + return; + } + + if (of_clk_add_provider(np, of_clk_src_simple_get, clk)) { + pr_err("%s: clk provider registration failed\n", np->name); + return; + } +} +CLK_OF_DECLARE(xtfpga_clk, "cdns,xtfpga-clock", xtfpga_clk_setup); + +#define MAC_LEN 6 +static void __init update_local_mac(struct device_node *node) +{ + struct property *newmac; + const u8* macaddr; + int prop_len; + + macaddr = of_get_property(node, "local-mac-address", &prop_len); + if (macaddr == NULL || prop_len != MAC_LEN) + return; + + newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL); + if (newmac == NULL) + return; + + newmac->value = newmac + 1; + newmac->length = MAC_LEN; + newmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (newmac->name == NULL) { + kfree(newmac); + return; + } + + memcpy(newmac->value, macaddr, MAC_LEN); + ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f; + of_update_property(node, newmac); +} + +static int __init machine_setup(void) +{ + struct device_node *eth = NULL; + + if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc"))) + update_local_mac(eth); + return 0; +} +arch_initcall(machine_setup); + +#else + +#include <linux/serial_8250.h> +#include <linux/if.h> +#include <net/ethoc.h> +#include <linux/usb/c67x00.h> + +/*---------------------------------------------------------------------------- + * Ethernet -- OpenCores Ethernet MAC (ethoc driver) + */ + +static struct resource ethoc_res[] = { + [0] = { /* register space */ + .start = OETH_REGS_PADDR, + .end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* buffer space */ + .start = OETH_SRAMBUFF_PADDR, + .end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { /* IRQ number */ + .start = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), + .end = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ethoc_platform_data ethoc_pdata = { + /* + * The MAC address for these boards is 00:50:c2:13:6f:xx. + * The last byte (here as zero) is read from the DIP switches on the + * board. + */ + .hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 }, + .phy_id = -1, + .big_endian = XCHAL_HAVE_BE, +}; + +static struct platform_device ethoc_device = { + .name = "ethoc", + .id = -1, + .num_resources = ARRAY_SIZE(ethoc_res), + .resource = ethoc_res, + .dev = { + .platform_data = ðoc_pdata, + }, +}; + +/*---------------------------------------------------------------------------- + * USB Host/Device -- Cypress CY7C67300 + */ + +static struct resource c67x00_res[] = { + [0] = { /* register space */ + .start = C67X00_PADDR, + .end = C67X00_PADDR + C67X00_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* IRQ number */ + .start = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), + .end = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct c67x00_platform_data c67x00_pdata = { + .sie_config = C67X00_SIE1_HOST | C67X00_SIE2_UNUSED, + .hpi_regstep = 4, +}; + +static struct platform_device c67x00_device = { + .name = "c67x00", + .id = -1, + .num_resources = ARRAY_SIZE(c67x00_res), + .resource = c67x00_res, + .dev = { + .platform_data = &c67x00_pdata, + }, +}; + +/*---------------------------------------------------------------------------- + * UART + */ + +static struct resource serial_resource = { + .start = DUART16552_PADDR, + .end = DUART16552_PADDR + 0x1f, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port serial_platform_data[] = { + [0] = { + .mapbase = DUART16552_PADDR, + .irq = XTENSA_PIC_LINUX_IRQ(DUART16552_INTNUM), + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = XCHAL_HAVE_BE ? UPIO_MEM32BE : UPIO_MEM32, + .regshift = 2, + .uartclk = 0, /* set in xtavnet_init() */ + }, + { }, +}; + +static struct platform_device xtavnet_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = 1, + .resource = &serial_resource, +}; + +/* platform devices */ +static struct platform_device *platform_devices[] __initdata = { + ðoc_device, + &c67x00_device, + &xtavnet_uart, +}; + + +static int __init xtavnet_init(void) +{ + /* Ethernet MAC address. */ + ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR; + + /* Clock rate varies among FPGA bitstreams; board specific FPGA register + * reports the actual clock rate. + */ + serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR; + + + /* register platform devices */ + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + /* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user + * knows whether they set it correctly on the DIP switches. + */ + pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr); + ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR; + + return 0; +} + +/* + * Register to be done during do_initcalls(). + */ +arch_initcall(xtavnet_init); + +#endif /* CONFIG_USE_OF */ |