diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/bus/mvebu-mbus.c | 1378 |
1 files changed, 1378 insertions, 0 deletions
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c new file mode 100644 index 000000000..70db4d563 --- /dev/null +++ b/drivers/bus/mvebu-mbus.c @@ -0,0 +1,1378 @@ +/* + * Address map functions for Marvell EBU SoCs (Kirkwood, Armada + * 370/XP, Dove, Orion5x and MV78xx0) + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The Marvell EBU SoCs have a configurable physical address space: + * the physical address at which certain devices (PCIe, NOR, NAND, + * etc.) sit can be configured. The configuration takes place through + * two sets of registers: + * + * - One to configure the access of the CPU to the devices. Depending + * on the families, there are between 8 and 20 configurable windows, + * each can be use to create a physical memory window that maps to a + * specific device. Devices are identified by a tuple (target, + * attribute). + * + * - One to configure the access to the CPU to the SDRAM. There are + * either 2 (for Dove) or 4 (for other families) windows to map the + * SDRAM into the physical address space. + * + * This driver: + * + * - Reads out the SDRAM address decoding windows at initialization + * time, and fills the mvebu_mbus_dram_info structure with these + * informations. The exported function mv_mbus_dram_info() allow + * device drivers to get those informations related to the SDRAM + * address decoding windows. This is because devices also have their + * own windows (configured through registers that are part of each + * device register space), and therefore the drivers for Marvell + * devices have to configure those device -> SDRAM windows to ensure + * that DMA works properly. + * + * - Provides an API for platform code or device drivers to + * dynamically add or remove address decoding windows for the CPU -> + * device accesses. This API is mvebu_mbus_add_window_by_id(), + * mvebu_mbus_add_window_remap_by_id() and + * mvebu_mbus_del_window(). + * + * - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to + * see the list of CPU -> SDRAM windows and their configuration + * (file 'sdram') and the list of CPU -> devices windows and their + * configuration (file 'devices'). + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/debugfs.h> +#include <linux/log2.h> +#include <linux/memblock.h> +#include <linux/syscore_ops.h> + +/* + * DDR target is the same on all platforms. + */ +#define TARGET_DDR 0 + +/* + * CPU Address Decode Windows registers + */ +#define WIN_CTRL_OFF 0x0000 +#define WIN_CTRL_ENABLE BIT(0) +/* Only on HW I/O coherency capable platforms */ +#define WIN_CTRL_SYNCBARRIER BIT(1) +#define WIN_CTRL_TGT_MASK 0xf0 +#define WIN_CTRL_TGT_SHIFT 4 +#define WIN_CTRL_ATTR_MASK 0xff00 +#define WIN_CTRL_ATTR_SHIFT 8 +#define WIN_CTRL_SIZE_MASK 0xffff0000 +#define WIN_CTRL_SIZE_SHIFT 16 +#define WIN_BASE_OFF 0x0004 +#define WIN_BASE_LOW 0xffff0000 +#define WIN_BASE_HIGH 0xf +#define WIN_REMAP_LO_OFF 0x0008 +#define WIN_REMAP_LOW 0xffff0000 +#define WIN_REMAP_HI_OFF 0x000c + +#define UNIT_SYNC_BARRIER_OFF 0x84 +#define UNIT_SYNC_BARRIER_ALL 0xFFFF + +#define ATTR_HW_COHERENCY (0x1 << 4) + +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_BASE_CS_HIGH_MASK 0xf +#define DDR_BASE_CS_LOW_MASK 0xff000000 +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) +#define DDR_SIZE_ENABLED BIT(0) +#define DDR_SIZE_CS_MASK 0x1c +#define DDR_SIZE_CS_SHIFT 2 +#define DDR_SIZE_MASK 0xff000000 + +#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) + +/* Relative to mbusbridge_base */ +#define MBUS_BRIDGE_CTRL_OFF 0x0 +#define MBUS_BRIDGE_BASE_OFF 0x4 + +/* Maximum number of windows, for all known platforms */ +#define MBUS_WINS_MAX 20 + +struct mvebu_mbus_state; + +struct mvebu_mbus_soc_data { + unsigned int num_wins; + bool has_mbus_bridge; + unsigned int (*win_cfg_offset)(const int win); + unsigned int (*win_remap_offset)(const int win); + void (*setup_cpu_target)(struct mvebu_mbus_state *s); + int (*save_cpu_target)(struct mvebu_mbus_state *s, + u32 __iomem *store_addr); + int (*show_cpu_target)(struct mvebu_mbus_state *s, + struct seq_file *seq, void *v); +}; + +/* + * Used to store the state of one MBus window accross suspend/resume. + */ +struct mvebu_mbus_win_data { + u32 ctrl; + u32 base; + u32 remap_lo; + u32 remap_hi; +}; + +struct mvebu_mbus_state { + void __iomem *mbuswins_base; + void __iomem *sdramwins_base; + void __iomem *mbusbridge_base; + phys_addr_t sdramwins_phys_base; + struct dentry *debugfs_root; + struct dentry *debugfs_sdram; + struct dentry *debugfs_devs; + struct resource pcie_mem_aperture; + struct resource pcie_io_aperture; + const struct mvebu_mbus_soc_data *soc; + int hw_io_coherency; + + /* Used during suspend/resume */ + u32 mbus_bridge_ctrl; + u32 mbus_bridge_base; + struct mvebu_mbus_win_data wins[MBUS_WINS_MAX]; +}; + +static struct mvebu_mbus_state mbus_state; + +/* + * We provide two variants of the mv_mbus_dram_info() function: + * + * - The normal one, where the described DRAM ranges may overlap with + * the I/O windows, but for which the DRAM ranges are guaranteed to + * have a power of two size. Such ranges are suitable for the DMA + * masters that only DMA between the RAM and the device, which is + * actually all devices except the crypto engines. + * + * - The 'nooverlap' one, where the described DRAM ranges are + * guaranteed to not overlap with the I/O windows, but for which the + * DRAM ranges will not have power of two sizes. They will only be + * aligned on a 64 KB boundary, and have a size multiple of 64 + * KB. Such ranges are suitable for the DMA masters that DMA between + * the crypto SRAM (which is mapped through an I/O window) and a + * device. This is the case for the crypto engines. + */ + +static struct mbus_dram_target_info mvebu_mbus_dram_info; +static struct mbus_dram_target_info mvebu_mbus_dram_info_nooverlap; + +const struct mbus_dram_target_info *mv_mbus_dram_info(void) +{ + return &mvebu_mbus_dram_info; +} +EXPORT_SYMBOL_GPL(mv_mbus_dram_info); + +const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void) +{ + return &mvebu_mbus_dram_info_nooverlap; +} +EXPORT_SYMBOL_GPL(mv_mbus_dram_info_nooverlap); + +/* Checks whether the given window has remap capability */ +static bool mvebu_mbus_window_is_remappable(struct mvebu_mbus_state *mbus, + const int win) +{ + return mbus->soc->win_remap_offset(win) != MVEBU_MBUS_NO_REMAP; +} + +/* + * Functions to manipulate the address decoding windows + */ + +static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, + int win, int *enabled, u64 *base, + u32 *size, u8 *target, u8 *attr, + u64 *remap) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 basereg = readl(addr + WIN_BASE_OFF); + u32 ctrlreg = readl(addr + WIN_CTRL_OFF); + + if (!(ctrlreg & WIN_CTRL_ENABLE)) { + *enabled = 0; + return; + } + + *enabled = 1; + *base = ((u64)basereg & WIN_BASE_HIGH) << 32; + *base |= (basereg & WIN_BASE_LOW); + *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; + + if (target) + *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; + + if (attr) + *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; + + if (remap) { + if (mvebu_mbus_window_is_remappable(mbus, win)) { + u32 remap_low, remap_hi; + void __iomem *addr_rmp = mbus->mbuswins_base + + mbus->soc->win_remap_offset(win); + remap_low = readl(addr_rmp + WIN_REMAP_LO_OFF); + remap_hi = readl(addr_rmp + WIN_REMAP_HI_OFF); + *remap = ((u64)remap_hi << 32) | remap_low; + } else + *remap = 0; + } +} + +static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, + int win) +{ + void __iomem *addr; + + addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); + writel(0, addr + WIN_BASE_OFF); + writel(0, addr + WIN_CTRL_OFF); + + if (mvebu_mbus_window_is_remappable(mbus, win)) { + addr = mbus->mbuswins_base + mbus->soc->win_remap_offset(win); + writel(0, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } +} + +/* Checks whether the given window number is available */ + +static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, + const int win) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl = readl(addr + WIN_CTRL_OFF); + + return !(ctrl & WIN_CTRL_ENABLE); +} + +/* + * Checks whether the given (base, base+size) area doesn't overlap an + * existing region + */ +static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + u8 target, u8 attr) +{ + u64 end = (u64)base + size; + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase, wend; + u32 wsize; + u8 wtarget, wattr; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + &wtarget, &wattr, NULL); + + if (!enabled) + continue; + + wend = wbase + wsize; + + /* + * Check if the current window overlaps with the + * proposed physical range + */ + if ((u64)base < wend && end > wbase) + return 0; + } + + return 1; +} + +static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size) +{ + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase; + u32 wsize; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + NULL, NULL, NULL); + + if (!enabled) + continue; + + if (base == wbase && size == wsize) + return win; + } + + return -ENODEV; +} + +static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, + int win, phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl, remap_addr; + + if (!is_power_of_2(size)) { + WARN(true, "Invalid MBus window size: 0x%zx\n", size); + return -EINVAL; + } + + if ((base & (phys_addr_t)(size - 1)) != 0) { + WARN(true, "Invalid MBus base/size: %pa len 0x%zx\n", &base, + size); + return -EINVAL; + } + + ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | + (attr << WIN_CTRL_ATTR_SHIFT) | + (target << WIN_CTRL_TGT_SHIFT) | + WIN_CTRL_ENABLE; + if (mbus->hw_io_coherency) + ctrl |= WIN_CTRL_SYNCBARRIER; + + writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); + writel(ctrl, addr + WIN_CTRL_OFF); + + if (mvebu_mbus_window_is_remappable(mbus, win)) { + void __iomem *addr_rmp = mbus->mbuswins_base + + mbus->soc->win_remap_offset(win); + + if (remap == MVEBU_MBUS_NO_REMAP) + remap_addr = base; + else + remap_addr = remap; + writel(remap_addr & WIN_REMAP_LOW, addr_rmp + WIN_REMAP_LO_OFF); + writel(0, addr_rmp + WIN_REMAP_HI_OFF); + } + + return 0; +} + +static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + int win; + + if (remap == MVEBU_MBUS_NO_REMAP) { + for (win = 0; win < mbus->soc->num_wins; win++) { + if (mvebu_mbus_window_is_remappable(mbus, win)) + continue; + + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, + size, remap, + target, attr); + } + } + + for (win = 0; win < mbus->soc->num_wins; win++) { + /* Skip window if need remap but is not supported */ + if ((remap != MVEBU_MBUS_NO_REMAP) && + !mvebu_mbus_window_is_remappable(mbus, win)) + continue; + + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, size, + remap, target, attr); + } + + return -ENOMEM; +} + +/* + * Debugfs debugging + */ + +/* Common function used for Dove, Kirkwood, Armada 370/XP and Orion 5x */ +static int mvebu_sdram_debug_show_orion(struct mvebu_mbus_state *mbus, + struct seq_file *seq, void *v) +{ + int i; + + for (i = 0; i < 4; i++) { + u32 basereg = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 sizereg = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + u64 base; + u32 size; + + if (!(sizereg & DDR_SIZE_ENABLED)) { + seq_printf(seq, "[%d] disabled\n", i); + continue; + } + + base = ((u64)basereg & DDR_BASE_CS_HIGH_MASK) << 32; + base |= basereg & DDR_BASE_CS_LOW_MASK; + size = (sizereg | ~DDR_SIZE_MASK); + + seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n", + i, (unsigned long long)base, + (unsigned long long)base + size + 1, + (sizereg & DDR_SIZE_CS_MASK) >> DDR_SIZE_CS_SHIFT); + } + + return 0; +} + +/* Special function for Dove */ +static int mvebu_sdram_debug_show_dove(struct mvebu_mbus_state *mbus, + struct seq_file *seq, void *v) +{ + int i; + + for (i = 0; i < 2; i++) { + u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i)); + u64 base; + u32 size; + + if (!(map & 1)) { + seq_printf(seq, "[%d] disabled\n", i); + continue; + } + + base = map & 0xff800000; + size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); + + seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n", + i, (unsigned long long)base, + (unsigned long long)base + size, i); + } + + return 0; +} + +static int mvebu_sdram_debug_show(struct seq_file *seq, void *v) +{ + struct mvebu_mbus_state *mbus = &mbus_state; + return mbus->soc->show_cpu_target(mbus, seq, v); +} + +static int mvebu_sdram_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, mvebu_sdram_debug_show, inode->i_private); +} + +static const struct file_operations mvebu_sdram_debug_fops = { + .open = mvebu_sdram_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int mvebu_devs_debug_show(struct seq_file *seq, void *v) +{ + struct mvebu_mbus_state *mbus = &mbus_state; + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase, wremap; + u32 wsize; + u8 wtarget, wattr; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + &wtarget, &wattr, &wremap); + + if (!enabled) { + seq_printf(seq, "[%02d] disabled\n", win); + continue; + } + + seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x", + win, (unsigned long long)wbase, + (unsigned long long)(wbase + wsize), wtarget, wattr); + + if (!is_power_of_2(wsize) || + ((wbase & (u64)(wsize - 1)) != 0)) + seq_puts(seq, " (Invalid base/size!!)"); + + if (mvebu_mbus_window_is_remappable(mbus, win)) { + seq_printf(seq, " (remap %016llx)\n", + (unsigned long long)wremap); + } else + seq_printf(seq, "\n"); + } + + return 0; +} + +static int mvebu_devs_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, mvebu_devs_debug_show, inode->i_private); +} + +static const struct file_operations mvebu_devs_debug_fops = { + .open = mvebu_devs_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * SoC-specific functions and definitions + */ + +static unsigned int generic_mbus_win_cfg_offset(int win) +{ + return win << 4; +} + +static unsigned int armada_370_xp_mbus_win_cfg_offset(int win) +{ + /* The register layout is a bit annoying and the below code + * tries to cope with it. + * - At offset 0x0, there are the registers for the first 8 + * windows, with 4 registers of 32 bits per window (ctrl, + * base, remap low, remap high) + * - Then at offset 0x80, there is a hole of 0x10 bytes for + * the internal registers base address and internal units + * sync barrier register. + * - Then at offset 0x90, there the registers for 12 + * windows, with only 2 registers of 32 bits per window + * (ctrl, base). + */ + if (win < 8) + return win << 4; + else + return 0x90 + ((win - 8) << 3); +} + +static unsigned int mv78xx0_mbus_win_cfg_offset(int win) +{ + if (win < 8) + return win << 4; + else + return 0x900 + ((win - 8) << 4); +} + +static unsigned int generic_mbus_win_remap_2_offset(int win) +{ + if (win < 2) + return generic_mbus_win_cfg_offset(win); + else + return MVEBU_MBUS_NO_REMAP; +} + +static unsigned int generic_mbus_win_remap_4_offset(int win) +{ + if (win < 4) + return generic_mbus_win_cfg_offset(win); + else + return MVEBU_MBUS_NO_REMAP; +} + +static unsigned int generic_mbus_win_remap_8_offset(int win) +{ + if (win < 8) + return generic_mbus_win_cfg_offset(win); + else + return MVEBU_MBUS_NO_REMAP; +} + +static unsigned int armada_xp_mbus_win_remap_offset(int win) +{ + if (win < 8) + return generic_mbus_win_cfg_offset(win); + else if (win == 13) + return 0xF0 - WIN_REMAP_LO_OFF; + else + return MVEBU_MBUS_NO_REMAP; +} + +/* + * Use the memblock information to find the MBus bridge hole in the + * physical address space. + */ +static void __init +mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end) +{ + struct memblock_region *r; + uint64_t s = 0; + + for_each_memblock(memory, r) { + /* + * This part of the memory is above 4 GB, so we don't + * care for the MBus bridge hole. + */ + if (r->base >= 0x100000000ULL) + continue; + + /* + * The MBus bridge hole is at the end of the RAM under + * the 4 GB limit. + */ + if (r->base + r->size > s) + s = r->base + r->size; + } + + *start = s; + *end = 0x100000000ULL; +} + +/* + * This function fills in the mvebu_mbus_dram_info_nooverlap data + * structure, by looking at the mvebu_mbus_dram_info data, and + * removing the parts of it that overlap with I/O windows. + */ +static void __init +mvebu_mbus_setup_cpu_target_nooverlap(struct mvebu_mbus_state *mbus) +{ + uint64_t mbus_bridge_base, mbus_bridge_end; + int cs_nooverlap = 0; + int i; + + mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end); + + for (i = 0; i < mvebu_mbus_dram_info.num_cs; i++) { + struct mbus_dram_window *w; + u64 base, size, end; + + w = &mvebu_mbus_dram_info.cs[i]; + base = w->base; + size = w->size; + end = base + size; + + /* + * The CS is fully enclosed inside the MBus bridge + * area, so ignore it. + */ + if (base >= mbus_bridge_base && end <= mbus_bridge_end) + continue; + + /* + * Beginning of CS overlaps with end of MBus, raise CS + * base address, and shrink its size. + */ + if (base >= mbus_bridge_base && end > mbus_bridge_end) { + size -= mbus_bridge_end - base; + base = mbus_bridge_end; + } + + /* + * End of CS overlaps with beginning of MBus, shrink + * CS size. + */ + if (base < mbus_bridge_base && end > mbus_bridge_base) + size -= end - mbus_bridge_base; + + w = &mvebu_mbus_dram_info_nooverlap.cs[cs_nooverlap++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + if (mbus->hw_io_coherency) + w->mbus_attr |= ATTR_HW_COHERENCY; + w->base = base; + w->size = size; + } + + mvebu_mbus_dram_info_nooverlap.mbus_dram_target_id = TARGET_DDR; + mvebu_mbus_dram_info_nooverlap.num_cs = cs_nooverlap; +} + +static void __init +mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) +{ + int i; + int cs; + + mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + + /* + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). + */ + if ((size & DDR_SIZE_ENABLED) && + !(base & DDR_BASE_CS_HIGH_MASK)) { + struct mbus_dram_window *w; + + w = &mvebu_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + if (mbus->hw_io_coherency) + w->mbus_attr |= ATTR_HW_COHERENCY; + w->base = base & DDR_BASE_CS_LOW_MASK; + w->size = (u64)(size | ~DDR_SIZE_MASK) + 1; + } + } + mvebu_mbus_dram_info.num_cs = cs; +} + +static int +mvebu_mbus_default_save_cpu_target(struct mvebu_mbus_state *mbus, + u32 __iomem *store_addr) +{ + int i; + + for (i = 0; i < 4; i++) { + u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + + writel(mbus->sdramwins_phys_base + DDR_BASE_CS_OFF(i), + store_addr++); + writel(base, store_addr++); + writel(mbus->sdramwins_phys_base + DDR_SIZE_CS_OFF(i), + store_addr++); + writel(size, store_addr++); + } + + /* We've written 16 words to the store address */ + return 16; +} + +static void __init +mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus) +{ + int i; + int cs; + + mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 2; i++) { + u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i)); + + /* + * Chip select enabled? + */ + if (map & 1) { + struct mbus_dram_window *w; + + w = &mvebu_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0; /* CS address decoding done inside */ + /* the DDR controller, no need to */ + /* provide attributes */ + w->base = map & 0xff800000; + w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); + } + } + + mvebu_mbus_dram_info.num_cs = cs; +} + +static int +mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus, + u32 __iomem *store_addr) +{ + int i; + + for (i = 0; i < 2; i++) { + u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i)); + + writel(mbus->sdramwins_phys_base + DOVE_DDR_BASE_CS_OFF(i), + store_addr++); + writel(map, store_addr++); + } + + /* We've written 4 words to the store address */ + return 4; +} + +int mvebu_mbus_save_cpu_target(u32 __iomem *store_addr) +{ + return mbus_state.soc->save_cpu_target(&mbus_state, store_addr); +} + +static const struct mvebu_mbus_soc_data armada_370_mbus_data = { + .num_wins = 20, + .has_mbus_bridge = true, + .win_cfg_offset = armada_370_xp_mbus_win_cfg_offset, + .win_remap_offset = generic_mbus_win_remap_8_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .save_cpu_target = mvebu_mbus_default_save_cpu_target, +}; + +static const struct mvebu_mbus_soc_data armada_xp_mbus_data = { + .num_wins = 20, + .has_mbus_bridge = true, + .win_cfg_offset = armada_370_xp_mbus_win_cfg_offset, + .win_remap_offset = armada_xp_mbus_win_remap_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, + .save_cpu_target = mvebu_mbus_default_save_cpu_target, +}; + +static const struct mvebu_mbus_soc_data kirkwood_mbus_data = { + .num_wins = 8, + .win_cfg_offset = generic_mbus_win_cfg_offset, + .save_cpu_target = mvebu_mbus_default_save_cpu_target, + .win_remap_offset = generic_mbus_win_remap_4_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, +}; + +static const struct mvebu_mbus_soc_data dove_mbus_data = { + .num_wins = 8, + .win_cfg_offset = generic_mbus_win_cfg_offset, + .save_cpu_target = mvebu_mbus_dove_save_cpu_target, + .win_remap_offset = generic_mbus_win_remap_4_offset, + .setup_cpu_target = mvebu_mbus_dove_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_dove, +}; + +/* + * Some variants of Orion5x have 4 remappable windows, some other have + * only two of them. + */ +static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = { + .num_wins = 8, + .win_cfg_offset = generic_mbus_win_cfg_offset, + .save_cpu_target = mvebu_mbus_default_save_cpu_target, + .win_remap_offset = generic_mbus_win_remap_4_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, +}; + +static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = { + .num_wins = 8, + .win_cfg_offset = generic_mbus_win_cfg_offset, + .save_cpu_target = mvebu_mbus_default_save_cpu_target, + .win_remap_offset = generic_mbus_win_remap_2_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, +}; + +static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = { + .num_wins = 14, + .win_cfg_offset = mv78xx0_mbus_win_cfg_offset, + .save_cpu_target = mvebu_mbus_default_save_cpu_target, + .win_remap_offset = generic_mbus_win_remap_8_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, + .show_cpu_target = mvebu_sdram_debug_show_orion, +}; + +static const struct of_device_id of_mvebu_mbus_ids[] = { + { .compatible = "marvell,armada370-mbus", + .data = &armada_370_mbus_data, }, + { .compatible = "marvell,armada375-mbus", + .data = &armada_xp_mbus_data, }, + { .compatible = "marvell,armada380-mbus", + .data = &armada_xp_mbus_data, }, + { .compatible = "marvell,armadaxp-mbus", + .data = &armada_xp_mbus_data, }, + { .compatible = "marvell,kirkwood-mbus", + .data = &kirkwood_mbus_data, }, + { .compatible = "marvell,dove-mbus", + .data = &dove_mbus_data, }, + { .compatible = "marvell,orion5x-88f5281-mbus", + .data = &orion5x_4win_mbus_data, }, + { .compatible = "marvell,orion5x-88f5182-mbus", + .data = &orion5x_2win_mbus_data, }, + { .compatible = "marvell,orion5x-88f5181-mbus", + .data = &orion5x_2win_mbus_data, }, + { .compatible = "marvell,orion5x-88f6183-mbus", + .data = &orion5x_4win_mbus_data, }, + { .compatible = "marvell,mv78xx0-mbus", + .data = &mv78xx0_mbus_data, }, + { }, +}; + +/* + * Public API of the driver + */ +int mvebu_mbus_add_window_remap_by_id(unsigned int target, + unsigned int attribute, + phys_addr_t base, size_t size, + phys_addr_t remap) +{ + struct mvebu_mbus_state *s = &mbus_state; + + if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { + pr_err("cannot add window '%x:%x', conflicts with another window\n", + target, attribute); + return -EINVAL; + } + + return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); +} + +int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, + phys_addr_t base, size_t size) +{ + return mvebu_mbus_add_window_remap_by_id(target, attribute, base, + size, MVEBU_MBUS_NO_REMAP); +} + +int mvebu_mbus_del_window(phys_addr_t base, size_t size) +{ + int win; + + win = mvebu_mbus_find_window(&mbus_state, base, size); + if (win < 0) + return win; + + mvebu_mbus_disable_window(&mbus_state, win); + return 0; +} + +void mvebu_mbus_get_pcie_mem_aperture(struct resource *res) +{ + if (!res) + return; + *res = mbus_state.pcie_mem_aperture; +} + +void mvebu_mbus_get_pcie_io_aperture(struct resource *res) +{ + if (!res) + return; + *res = mbus_state.pcie_io_aperture; +} + +int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr) +{ + const struct mbus_dram_target_info *dram; + int i; + + /* Get dram info */ + dram = mv_mbus_dram_info(); + if (!dram) { + pr_err("missing DRAM information\n"); + return -ENODEV; + } + + /* Try to find matching DRAM window for phyaddr */ + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + if (cs->base <= phyaddr && + phyaddr <= (cs->base + cs->size - 1)) { + *target = dram->mbus_dram_target_id; + *attr = cs->mbus_attr; + return 0; + } + } + + pr_err("invalid dram address %pa\n", &phyaddr); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info); + +int mvebu_mbus_get_io_win_info(phys_addr_t phyaddr, u32 *size, u8 *target, + u8 *attr) +{ + int win; + + for (win = 0; win < mbus_state.soc->num_wins; win++) { + u64 wbase; + int enabled; + + mvebu_mbus_read_window(&mbus_state, win, &enabled, &wbase, + size, target, attr, NULL); + + if (!enabled) + continue; + + if (wbase <= phyaddr && phyaddr <= wbase + *size) + return win; + } + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(mvebu_mbus_get_io_win_info); + +static __init int mvebu_mbus_debugfs_init(void) +{ + struct mvebu_mbus_state *s = &mbus_state; + + /* + * If no base has been initialized, doesn't make sense to + * register the debugfs entries. We may be on a multiplatform + * kernel that isn't running a Marvell EBU SoC. + */ + if (!s->mbuswins_base) + return 0; + + s->debugfs_root = debugfs_create_dir("mvebu-mbus", NULL); + if (s->debugfs_root) { + s->debugfs_sdram = debugfs_create_file("sdram", S_IRUGO, + s->debugfs_root, NULL, + &mvebu_sdram_debug_fops); + s->debugfs_devs = debugfs_create_file("devices", S_IRUGO, + s->debugfs_root, NULL, + &mvebu_devs_debug_fops); + } + + return 0; +} +fs_initcall(mvebu_mbus_debugfs_init); + +static int mvebu_mbus_suspend(void) +{ + struct mvebu_mbus_state *s = &mbus_state; + int win; + + if (!s->mbusbridge_base) + return -ENODEV; + + for (win = 0; win < s->soc->num_wins; win++) { + void __iomem *addr = s->mbuswins_base + + s->soc->win_cfg_offset(win); + void __iomem *addr_rmp; + + s->wins[win].base = readl(addr + WIN_BASE_OFF); + s->wins[win].ctrl = readl(addr + WIN_CTRL_OFF); + + if (!mvebu_mbus_window_is_remappable(s, win)) + continue; + + addr_rmp = s->mbuswins_base + + s->soc->win_remap_offset(win); + + s->wins[win].remap_lo = readl(addr_rmp + WIN_REMAP_LO_OFF); + s->wins[win].remap_hi = readl(addr_rmp + WIN_REMAP_HI_OFF); + } + + s->mbus_bridge_ctrl = readl(s->mbusbridge_base + + MBUS_BRIDGE_CTRL_OFF); + s->mbus_bridge_base = readl(s->mbusbridge_base + + MBUS_BRIDGE_BASE_OFF); + + return 0; +} + +static void mvebu_mbus_resume(void) +{ + struct mvebu_mbus_state *s = &mbus_state; + int win; + + writel(s->mbus_bridge_ctrl, + s->mbusbridge_base + MBUS_BRIDGE_CTRL_OFF); + writel(s->mbus_bridge_base, + s->mbusbridge_base + MBUS_BRIDGE_BASE_OFF); + + for (win = 0; win < s->soc->num_wins; win++) { + void __iomem *addr = s->mbuswins_base + + s->soc->win_cfg_offset(win); + void __iomem *addr_rmp; + + writel(s->wins[win].base, addr + WIN_BASE_OFF); + writel(s->wins[win].ctrl, addr + WIN_CTRL_OFF); + + if (!mvebu_mbus_window_is_remappable(s, win)) + continue; + + addr_rmp = s->mbuswins_base + + s->soc->win_remap_offset(win); + + writel(s->wins[win].remap_lo, addr_rmp + WIN_REMAP_LO_OFF); + writel(s->wins[win].remap_hi, addr_rmp + WIN_REMAP_HI_OFF); + } +} + +static struct syscore_ops mvebu_mbus_syscore_ops = { + .suspend = mvebu_mbus_suspend, + .resume = mvebu_mbus_resume, +}; + +static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, + phys_addr_t mbuswins_phys_base, + size_t mbuswins_size, + phys_addr_t sdramwins_phys_base, + size_t sdramwins_size, + phys_addr_t mbusbridge_phys_base, + size_t mbusbridge_size, + bool is_coherent) +{ + int win; + + mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size); + if (!mbus->mbuswins_base) + return -ENOMEM; + + mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size); + if (!mbus->sdramwins_base) { + iounmap(mbus_state.mbuswins_base); + return -ENOMEM; + } + + mbus->sdramwins_phys_base = sdramwins_phys_base; + + if (mbusbridge_phys_base) { + mbus->mbusbridge_base = ioremap(mbusbridge_phys_base, + mbusbridge_size); + if (!mbus->mbusbridge_base) { + iounmap(mbus->sdramwins_base); + iounmap(mbus->mbuswins_base); + return -ENOMEM; + } + } else + mbus->mbusbridge_base = NULL; + + for (win = 0; win < mbus->soc->num_wins; win++) + mvebu_mbus_disable_window(mbus, win); + + mbus->soc->setup_cpu_target(mbus); + mvebu_mbus_setup_cpu_target_nooverlap(mbus); + + if (is_coherent) + writel(UNIT_SYNC_BARRIER_ALL, + mbus->mbuswins_base + UNIT_SYNC_BARRIER_OFF); + + register_syscore_ops(&mvebu_mbus_syscore_ops); + + return 0; +} + +int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base, + size_t mbuswins_size, + phys_addr_t sdramwins_phys_base, + size_t sdramwins_size) +{ + const struct of_device_id *of_id; + + for (of_id = of_mvebu_mbus_ids; of_id->compatible[0]; of_id++) + if (!strcmp(of_id->compatible, soc)) + break; + + if (!of_id->compatible[0]) { + pr_err("could not find a matching SoC family\n"); + return -ENODEV; + } + + mbus_state.soc = of_id->data; + + return mvebu_mbus_common_init(&mbus_state, + mbuswins_phys_base, + mbuswins_size, + sdramwins_phys_base, + sdramwins_size, 0, 0, false); +} + +#ifdef CONFIG_OF +/* + * The window IDs in the ranges DT property have the following format: + * - bits 28 to 31: MBus custom field + * - bits 24 to 27: window target ID + * - bits 16 to 23: window attribute ID + * - bits 0 to 15: unused + */ +#define CUSTOM(id) (((id) & 0xF0000000) >> 24) +#define TARGET(id) (((id) & 0x0F000000) >> 24) +#define ATTR(id) (((id) & 0x00FF0000) >> 16) + +static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus, + u32 base, u32 size, + u8 target, u8 attr) +{ + if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { + pr_err("cannot add window '%04x:%04x', conflicts with another window\n", + target, attr); + return -EBUSY; + } + + if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP, + target, attr)) { + pr_err("cannot add window '%04x:%04x', too many windows\n", + target, attr); + return -ENOMEM; + } + return 0; +} + +static int __init +mbus_parse_ranges(struct device_node *node, + int *addr_cells, int *c_addr_cells, int *c_size_cells, + int *cell_count, const __be32 **ranges_start, + const __be32 **ranges_end) +{ + const __be32 *prop; + int ranges_len, tuple_len; + + /* Allow a node with no 'ranges' property */ + *ranges_start = of_get_property(node, "ranges", &ranges_len); + if (*ranges_start == NULL) { + *addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0; + *ranges_start = *ranges_end = NULL; + return 0; + } + *ranges_end = *ranges_start + ranges_len / sizeof(__be32); + + *addr_cells = of_n_addr_cells(node); + + prop = of_get_property(node, "#address-cells", NULL); + *c_addr_cells = be32_to_cpup(prop); + + prop = of_get_property(node, "#size-cells", NULL); + *c_size_cells = be32_to_cpup(prop); + + *cell_count = *addr_cells + *c_addr_cells + *c_size_cells; + tuple_len = (*cell_count) * sizeof(__be32); + + if (ranges_len % tuple_len) { + pr_warn("malformed ranges entry '%s'\n", node->name); + return -EINVAL; + } + return 0; +} + +static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus, + struct device_node *np) +{ + int addr_cells, c_addr_cells, c_size_cells; + int i, ret, cell_count; + const __be32 *r, *ranges_start, *ranges_end; + + ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells, + &c_size_cells, &cell_count, + &ranges_start, &ranges_end); + if (ret < 0) + return ret; + + for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) { + u32 windowid, base, size; + u8 target, attr; + + /* + * An entry with a non-zero custom field do not + * correspond to a static window, so skip it. + */ + windowid = of_read_number(r, 1); + if (CUSTOM(windowid)) + continue; + + target = TARGET(windowid); + attr = ATTR(windowid); + + base = of_read_number(r + c_addr_cells, addr_cells); + size = of_read_number(r + c_addr_cells + addr_cells, + c_size_cells); + ret = mbus_dt_setup_win(mbus, base, size, target, attr); + if (ret < 0) + return ret; + } + return 0; +} + +static void __init mvebu_mbus_get_pcie_resources(struct device_node *np, + struct resource *mem, + struct resource *io) +{ + u32 reg[2]; + int ret; + + /* + * These are optional, so we make sure that resource_size(x) will + * return 0. + */ + memset(mem, 0, sizeof(struct resource)); + mem->end = -1; + memset(io, 0, sizeof(struct resource)); + io->end = -1; + + ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg)); + if (!ret) { + mem->start = reg[0]; + mem->end = mem->start + reg[1] - 1; + mem->flags = IORESOURCE_MEM; + } + + ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg)); + if (!ret) { + io->start = reg[0]; + io->end = io->start + reg[1] - 1; + io->flags = IORESOURCE_IO; + } +} + +int __init mvebu_mbus_dt_init(bool is_coherent) +{ + struct resource mbuswins_res, sdramwins_res, mbusbridge_res; + struct device_node *np, *controller; + const struct of_device_id *of_id; + const __be32 *prop; + int ret; + + np = of_find_matching_node_and_match(NULL, of_mvebu_mbus_ids, &of_id); + if (!np) { + pr_err("could not find a matching SoC family\n"); + return -ENODEV; + } + + mbus_state.soc = of_id->data; + + prop = of_get_property(np, "controller", NULL); + if (!prop) { + pr_err("required 'controller' property missing\n"); + return -EINVAL; + } + + controller = of_find_node_by_phandle(be32_to_cpup(prop)); + if (!controller) { + pr_err("could not find an 'mbus-controller' node\n"); + return -ENODEV; + } + + if (of_address_to_resource(controller, 0, &mbuswins_res)) { + pr_err("cannot get MBUS register address\n"); + return -EINVAL; + } + + if (of_address_to_resource(controller, 1, &sdramwins_res)) { + pr_err("cannot get SDRAM register address\n"); + return -EINVAL; + } + + /* + * Set the resource to 0 so that it can be left unmapped by + * mvebu_mbus_common_init() if the DT doesn't carry the + * necessary information. This is needed to preserve backward + * compatibility. + */ + memset(&mbusbridge_res, 0, sizeof(mbusbridge_res)); + + if (mbus_state.soc->has_mbus_bridge) { + if (of_address_to_resource(controller, 2, &mbusbridge_res)) + pr_warn(FW_WARN "deprecated mbus-mvebu Device Tree, suspend/resume will not work\n"); + } + + mbus_state.hw_io_coherency = is_coherent; + + /* Get optional pcie-{mem,io}-aperture properties */ + mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture, + &mbus_state.pcie_io_aperture); + + ret = mvebu_mbus_common_init(&mbus_state, + mbuswins_res.start, + resource_size(&mbuswins_res), + sdramwins_res.start, + resource_size(&sdramwins_res), + mbusbridge_res.start, + resource_size(&mbusbridge_res), + is_coherent); + if (ret) + return ret; + + /* Setup statically declared windows in the DT */ + return mbus_dt_setup(&mbus_state, np); +} +#endif |