diff options
Diffstat (limited to 'drivers/char/tpm/st33zp24')
| -rw-r--r-- | drivers/char/tpm/st33zp24/Kconfig | 29 | ||||
| -rw-r--r-- | drivers/char/tpm/st33zp24/Makefile | 13 | ||||
| -rw-r--r-- | drivers/char/tpm/st33zp24/i2c.c | 329 | ||||
| -rw-r--r-- | drivers/char/tpm/st33zp24/spi.c | 446 | ||||
| -rw-r--r-- | drivers/char/tpm/st33zp24/st33zp24.c | 662 | ||||
| -rw-r--r-- | drivers/char/tpm/st33zp24/st33zp24.h | 49 |
6 files changed, 1528 insertions, 0 deletions
diff --git a/drivers/char/tpm/st33zp24/Kconfig b/drivers/char/tpm/st33zp24/Kconfig new file mode 100644 index 000000000..e74c6f29f --- /dev/null +++ b/drivers/char/tpm/st33zp24/Kconfig @@ -0,0 +1,29 @@ +config TCG_TIS_ST33ZP24 + tristate + ---help--- + STMicroelectronics ST33ZP24 core driver. It implements the core + TPM1.2 logic and hooks into the TPM kernel APIs. Physical layers will + register against it. + + To compile this driver as a module, choose m here. The module will be called + tpm_st33zp24. + +config TCG_TIS_ST33ZP24_I2C + tristate "STMicroelectronics TPM Interface Specification 1.2 Interface (I2C)" + depends on I2C + select TCG_TIS_ST33ZP24 + ---help--- + This module adds support for the STMicroelectronics TPM security chip + ST33ZP24 with i2c interface. + To compile this driver as a module, choose M here; the module will be + called tpm_st33zp24_i2c. + +config TCG_TIS_ST33ZP24_SPI + tristate "STMicroelectronics TPM Interface Specification 1.2 Interface (SPI)" + depends on SPI + select TCG_TIS_ST33ZP24 + ---help--- + This module adds support for the STMicroelectronics TPM security chip + ST33ZP24 with spi interface. + To compile this driver as a module, choose M here; the module will be + called tpm_st33zp24_spi. diff --git a/drivers/char/tpm/st33zp24/Makefile b/drivers/char/tpm/st33zp24/Makefile new file mode 100644 index 000000000..649e41107 --- /dev/null +++ b/drivers/char/tpm/st33zp24/Makefile @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for ST33ZP24 TPM 1.2 driver +# + +tpm_st33zp24-objs = st33zp24.o +obj-$(CONFIG_TCG_TIS_ST33ZP24) += tpm_st33zp24.o + +tpm_st33zp24_i2c-objs = i2c.o +obj-$(CONFIG_TCG_TIS_ST33ZP24_I2C) += tpm_st33zp24_i2c.o + +tpm_st33zp24_spi-objs = spi.o +obj-$(CONFIG_TCG_TIS_ST33ZP24_SPI) += tpm_st33zp24_spi.o diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c new file mode 100644 index 000000000..8390c5b54 --- /dev/null +++ b/drivers/char/tpm/st33zp24/i2c.c @@ -0,0 +1,329 @@ +/* + * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 + * Copyright (C) 2009 - 2016 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/acpi.h> +#include <linux/tpm.h> +#include <linux/platform_data/st33zp24.h> + +#include "../tpm.h" +#include "st33zp24.h" + +#define TPM_DUMMY_BYTE 0xAA + +struct st33zp24_i2c_phy { + struct i2c_client *client; + u8 buf[ST33ZP24_BUFSIZE + 1]; + int io_lpcpd; +}; + +/* + * write8_reg + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, The length of the data + * @return: Returns negative errno, or else the number of bytes written. + */ +static int write8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) +{ + struct st33zp24_i2c_phy *phy = phy_id; + + phy->buf[0] = tpm_register; + memcpy(phy->buf + 1, tpm_data, tpm_size); + return i2c_master_send(phy->client, phy->buf, tpm_size + 1); +} /* write8_reg() */ + +/* + * read8_reg + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: number of byte read successfully: should be one if success. + */ +static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) +{ + struct st33zp24_i2c_phy *phy = phy_id; + u8 status = 0; + u8 data; + + data = TPM_DUMMY_BYTE; + status = write8_reg(phy, tpm_register, &data, 1); + if (status == 2) + status = i2c_master_recv(phy->client, tpm_data, tpm_size); + return status; +} /* read8_reg() */ + +/* + * st33zp24_i2c_send + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, the length of the data + * @return: number of byte written successfully: should be one if success. + */ +static int st33zp24_i2c_send(void *phy_id, u8 tpm_register, u8 *tpm_data, + int tpm_size) +{ + return write8_reg(phy_id, tpm_register | TPM_WRITE_DIRECTION, tpm_data, + tpm_size); +} + +/* + * st33zp24_i2c_recv + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: number of byte read successfully: should be one if success. + */ +static int st33zp24_i2c_recv(void *phy_id, u8 tpm_register, u8 *tpm_data, + int tpm_size) +{ + return read8_reg(phy_id, tpm_register, tpm_data, tpm_size); +} + +static const struct st33zp24_phy_ops i2c_phy_ops = { + .send = st33zp24_i2c_send, + .recv = st33zp24_i2c_recv, +}; + +static const struct acpi_gpio_params lpcpd_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_st33zp24_gpios[] = { + { "lpcpd-gpios", &lpcpd_gpios, 1 }, + {}, +}; + +static int st33zp24_i2c_acpi_request_resources(struct i2c_client *client) +{ + struct tpm_chip *chip = i2c_get_clientdata(client); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + struct st33zp24_i2c_phy *phy = tpm_dev->phy_id; + struct gpio_desc *gpiod_lpcpd; + struct device *dev = &client->dev; + int ret; + + ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st33zp24_gpios); + if (ret) + return ret; + + /* Get LPCPD GPIO from ACPI */ + gpiod_lpcpd = devm_gpiod_get(dev, "lpcpd", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_lpcpd)) { + dev_err(&client->dev, + "Failed to retrieve lpcpd-gpios from acpi.\n"); + phy->io_lpcpd = -1; + /* + * lpcpd pin is not specified. This is not an issue as + * power management can be also managed by TPM specific + * commands. So leave with a success status code. + */ + return 0; + } + + phy->io_lpcpd = desc_to_gpio(gpiod_lpcpd); + + return 0; +} + +static int st33zp24_i2c_of_request_resources(struct i2c_client *client) +{ + struct tpm_chip *chip = i2c_get_clientdata(client); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + struct st33zp24_i2c_phy *phy = tpm_dev->phy_id; + struct device_node *pp; + int gpio; + int ret; + + pp = client->dev.of_node; + if (!pp) { + dev_err(&client->dev, "No platform data\n"); + return -ENODEV; + } + + /* Get GPIO from device tree */ + gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0); + if (gpio < 0) { + dev_err(&client->dev, + "Failed to retrieve lpcpd-gpios from dts.\n"); + phy->io_lpcpd = -1; + /* + * lpcpd pin is not specified. This is not an issue as + * power management can be also managed by TPM specific + * commands. So leave with a success status code. + */ + return 0; + } + /* GPIO request and configuration */ + ret = devm_gpio_request_one(&client->dev, gpio, + GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); + if (ret) { + dev_err(&client->dev, "Failed to request lpcpd pin\n"); + return -ENODEV; + } + phy->io_lpcpd = gpio; + + return 0; +} + +static int st33zp24_i2c_request_resources(struct i2c_client *client) +{ + struct tpm_chip *chip = i2c_get_clientdata(client); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + struct st33zp24_i2c_phy *phy = tpm_dev->phy_id; + struct st33zp24_platform_data *pdata; + int ret; + + pdata = client->dev.platform_data; + if (!pdata) { + dev_err(&client->dev, "No platform data\n"); + return -ENODEV; + } + + /* store for late use */ + phy->io_lpcpd = pdata->io_lpcpd; + + if (gpio_is_valid(pdata->io_lpcpd)) { + ret = devm_gpio_request_one(&client->dev, + pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, + "TPM IO_LPCPD"); + if (ret) { + dev_err(&client->dev, "Failed to request lpcpd pin\n"); + return ret; + } + } + + return 0; +} + +/* + * st33zp24_i2c_probe initialize the TPM device + * @param: client, the i2c_client drescription (TPM I2C description). + * @param: id, the i2c_device_id struct. + * @return: 0 in case of success. + * -1 in other case. + */ +static int st33zp24_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct st33zp24_platform_data *pdata; + struct st33zp24_i2c_phy *phy; + + if (!client) { + pr_info("%s: i2c client is NULL. Device not accessible.\n", + __func__); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_info(&client->dev, "client not i2c capable\n"); + return -ENODEV; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct st33zp24_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->client = client; + + pdata = client->dev.platform_data; + if (!pdata && client->dev.of_node) { + ret = st33zp24_i2c_of_request_resources(client); + if (ret) + return ret; + } else if (pdata) { + ret = st33zp24_i2c_request_resources(client); + if (ret) + return ret; + } else if (ACPI_HANDLE(&client->dev)) { + ret = st33zp24_i2c_acpi_request_resources(client); + if (ret) + return ret; + } + + return st33zp24_probe(phy, &i2c_phy_ops, &client->dev, client->irq, + phy->io_lpcpd); +} + +/* + * st33zp24_i2c_remove remove the TPM device + * @param: client, the i2c_client description (TPM I2C description). + * @return: 0 in case of success. + */ +static int st33zp24_i2c_remove(struct i2c_client *client) +{ + struct tpm_chip *chip = i2c_get_clientdata(client); + int ret; + + ret = st33zp24_remove(chip); + if (ret) + return ret; + + return 0; +} + +static const struct i2c_device_id st33zp24_i2c_id[] = { + {TPM_ST33_I2C, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, st33zp24_i2c_id); + +static const struct of_device_id of_st33zp24_i2c_match[] = { + { .compatible = "st,st33zp24-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match); + +static const struct acpi_device_id st33zp24_i2c_acpi_match[] = { + {"SMO3324"}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st33zp24_i2c_acpi_match); + +static SIMPLE_DEV_PM_OPS(st33zp24_i2c_ops, st33zp24_pm_suspend, + st33zp24_pm_resume); + +static struct i2c_driver st33zp24_i2c_driver = { + .driver = { + .name = TPM_ST33_I2C, + .pm = &st33zp24_i2c_ops, + .of_match_table = of_match_ptr(of_st33zp24_i2c_match), + .acpi_match_table = ACPI_PTR(st33zp24_i2c_acpi_match), + }, + .probe = st33zp24_i2c_probe, + .remove = st33zp24_i2c_remove, + .id_table = st33zp24_i2c_id +}; + +module_i2c_driver(st33zp24_i2c_driver); + +MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); +MODULE_DESCRIPTION("STM TPM 1.2 I2C ST33 Driver"); +MODULE_VERSION("1.3.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/tpm/st33zp24/spi.c b/drivers/char/tpm/st33zp24/spi.c new file mode 100644 index 000000000..ff019a1e3 --- /dev/null +++ b/drivers/char/tpm/st33zp24/spi.c @@ -0,0 +1,446 @@ +/* + * STMicroelectronics TPM SPI Linux driver for TPM ST33ZP24 + * Copyright (C) 2009 - 2016 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/acpi.h> +#include <linux/tpm.h> +#include <linux/platform_data/st33zp24.h> + +#include "../tpm.h" +#include "st33zp24.h" + +#define TPM_DATA_FIFO 0x24 +#define TPM_INTF_CAPABILITY 0x14 + +#define TPM_DUMMY_BYTE 0x00 + +#define MAX_SPI_LATENCY 15 +#define LOCALITY0 0 + +#define ST33ZP24_OK 0x5A +#define ST33ZP24_UNDEFINED_ERR 0x80 +#define ST33ZP24_BADLOCALITY 0x81 +#define ST33ZP24_TISREGISTER_UNKNOWN 0x82 +#define ST33ZP24_LOCALITY_NOT_ACTIVATED 0x83 +#define ST33ZP24_HASH_END_BEFORE_HASH_START 0x84 +#define ST33ZP24_BAD_COMMAND_ORDER 0x85 +#define ST33ZP24_INCORECT_RECEIVED_LENGTH 0x86 +#define ST33ZP24_TPM_FIFO_OVERFLOW 0x89 +#define ST33ZP24_UNEXPECTED_READ_FIFO 0x8A +#define ST33ZP24_UNEXPECTED_WRITE_FIFO 0x8B +#define ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END 0x90 +#define ST33ZP24_DUMMY_BYTES 0x00 + +/* + * TPM command can be up to 2048 byte, A TPM response can be up to + * 1024 byte. + * Between command and response, there are latency byte (up to 15 + * usually on st33zp24 2 are enough). + * + * Overall when sending a command and expecting an answer we need if + * worst case: + * 2048 (for the TPM command) + 1024 (for the TPM answer). We need + * some latency byte before the answer is available (max 15). + * We have 2048 + 1024 + 15. + */ +#define ST33ZP24_SPI_BUFFER_SIZE (ST33ZP24_BUFSIZE + (ST33ZP24_BUFSIZE / 2) +\ + MAX_SPI_LATENCY) + + +struct st33zp24_spi_phy { + struct spi_device *spi_device; + + u8 tx_buf[ST33ZP24_SPI_BUFFER_SIZE]; + u8 rx_buf[ST33ZP24_SPI_BUFFER_SIZE]; + + int io_lpcpd; + int latency; +}; + +static int st33zp24_status_to_errno(u8 code) +{ + switch (code) { + case ST33ZP24_OK: + return 0; + case ST33ZP24_UNDEFINED_ERR: + case ST33ZP24_BADLOCALITY: + case ST33ZP24_TISREGISTER_UNKNOWN: + case ST33ZP24_LOCALITY_NOT_ACTIVATED: + case ST33ZP24_HASH_END_BEFORE_HASH_START: + case ST33ZP24_BAD_COMMAND_ORDER: + case ST33ZP24_UNEXPECTED_READ_FIFO: + case ST33ZP24_UNEXPECTED_WRITE_FIFO: + case ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END: + return -EPROTO; + case ST33ZP24_INCORECT_RECEIVED_LENGTH: + case ST33ZP24_TPM_FIFO_OVERFLOW: + return -EMSGSIZE; + case ST33ZP24_DUMMY_BYTES: + return -ENOSYS; + } + return code; +} + +/* + * st33zp24_spi_send + * Send byte to the TIS register according to the ST33ZP24 SPI protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, The length of the data + * @return: should be zero if success else a negative error code. + */ +static int st33zp24_spi_send(void *phy_id, u8 tpm_register, u8 *tpm_data, + int tpm_size) +{ + int total_length = 0, ret = 0; + struct st33zp24_spi_phy *phy = phy_id; + struct spi_device *dev = phy->spi_device; + struct spi_transfer spi_xfer = { + .tx_buf = phy->tx_buf, + .rx_buf = phy->rx_buf, + }; + + /* Pre-Header */ + phy->tx_buf[total_length++] = TPM_WRITE_DIRECTION | LOCALITY0; + phy->tx_buf[total_length++] = tpm_register; + + if (tpm_size > 0 && tpm_register == TPM_DATA_FIFO) { + phy->tx_buf[total_length++] = tpm_size >> 8; + phy->tx_buf[total_length++] = tpm_size; + } + + memcpy(&phy->tx_buf[total_length], tpm_data, tpm_size); + total_length += tpm_size; + + memset(&phy->tx_buf[total_length], TPM_DUMMY_BYTE, phy->latency); + + spi_xfer.len = total_length + phy->latency; + + ret = spi_sync_transfer(dev, &spi_xfer, 1); + if (ret == 0) + ret = phy->rx_buf[total_length + phy->latency - 1]; + + return st33zp24_status_to_errno(ret); +} /* st33zp24_spi_send() */ + +/* + * st33zp24_spi_read8_recv + * Recv byte from the TIS register according to the ST33ZP24 SPI protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: should be zero if success else a negative error code. + */ +static int st33zp24_spi_read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, + int tpm_size) +{ + int total_length = 0, ret; + struct st33zp24_spi_phy *phy = phy_id; + struct spi_device *dev = phy->spi_device; + struct spi_transfer spi_xfer = { + .tx_buf = phy->tx_buf, + .rx_buf = phy->rx_buf, + }; + + /* Pre-Header */ + phy->tx_buf[total_length++] = LOCALITY0; + phy->tx_buf[total_length++] = tpm_register; + + memset(&phy->tx_buf[total_length], TPM_DUMMY_BYTE, + phy->latency + tpm_size); + + spi_xfer.len = total_length + phy->latency + tpm_size; + + /* header + status byte + size of the data + status byte */ + ret = spi_sync_transfer(dev, &spi_xfer, 1); + if (tpm_size > 0 && ret == 0) { + ret = phy->rx_buf[total_length + phy->latency - 1]; + + memcpy(tpm_data, phy->rx_buf + total_length + phy->latency, + tpm_size); + } + + return ret; +} /* st33zp24_spi_read8_reg() */ + +/* + * st33zp24_spi_recv + * Recv byte from the TIS register according to the ST33ZP24 SPI protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: number of byte read successfully: should be one if success. + */ +static int st33zp24_spi_recv(void *phy_id, u8 tpm_register, u8 *tpm_data, + int tpm_size) +{ + int ret; + + ret = st33zp24_spi_read8_reg(phy_id, tpm_register, tpm_data, tpm_size); + if (!st33zp24_status_to_errno(ret)) + return tpm_size; + return ret; +} /* st33zp24_spi_recv() */ + +static int st33zp24_spi_evaluate_latency(void *phy_id) +{ + struct st33zp24_spi_phy *phy = phy_id; + int latency = 1, status = 0; + u8 data = 0; + + while (!status && latency < MAX_SPI_LATENCY) { + phy->latency = latency; + status = st33zp24_spi_read8_reg(phy_id, TPM_INTF_CAPABILITY, + &data, 1); + latency++; + } + if (status < 0) + return status; + if (latency == MAX_SPI_LATENCY) + return -ENODEV; + + return latency - 1; +} /* evaluate_latency() */ + +static const struct st33zp24_phy_ops spi_phy_ops = { + .send = st33zp24_spi_send, + .recv = st33zp24_spi_recv, +}; + +static const struct acpi_gpio_params lpcpd_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_st33zp24_gpios[] = { + { "lpcpd-gpios", &lpcpd_gpios, 1 }, + {}, +}; + +static int st33zp24_spi_acpi_request_resources(struct spi_device *spi_dev) +{ + struct tpm_chip *chip = spi_get_drvdata(spi_dev); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + struct st33zp24_spi_phy *phy = tpm_dev->phy_id; + struct gpio_desc *gpiod_lpcpd; + struct device *dev = &spi_dev->dev; + int ret; + + ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st33zp24_gpios); + if (ret) + return ret; + + /* Get LPCPD GPIO from ACPI */ + gpiod_lpcpd = devm_gpiod_get(dev, "lpcpd", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_lpcpd)) { + dev_err(dev, "Failed to retrieve lpcpd-gpios from acpi.\n"); + phy->io_lpcpd = -1; + /* + * lpcpd pin is not specified. This is not an issue as + * power management can be also managed by TPM specific + * commands. So leave with a success status code. + */ + return 0; + } + + phy->io_lpcpd = desc_to_gpio(gpiod_lpcpd); + + return 0; +} + +static int st33zp24_spi_of_request_resources(struct spi_device *spi_dev) +{ + struct tpm_chip *chip = spi_get_drvdata(spi_dev); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + struct st33zp24_spi_phy *phy = tpm_dev->phy_id; + struct device_node *pp; + int gpio; + int ret; + + pp = spi_dev->dev.of_node; + if (!pp) { + dev_err(&spi_dev->dev, "No platform data\n"); + return -ENODEV; + } + + /* Get GPIO from device tree */ + gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0); + if (gpio < 0) { + dev_err(&spi_dev->dev, + "Failed to retrieve lpcpd-gpios from dts.\n"); + phy->io_lpcpd = -1; + /* + * lpcpd pin is not specified. This is not an issue as + * power management can be also managed by TPM specific + * commands. So leave with a success status code. + */ + return 0; + } + /* GPIO request and configuration */ + ret = devm_gpio_request_one(&spi_dev->dev, gpio, + GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); + if (ret) { + dev_err(&spi_dev->dev, "Failed to request lpcpd pin\n"); + return -ENODEV; + } + phy->io_lpcpd = gpio; + + return 0; +} + +static int st33zp24_spi_request_resources(struct spi_device *dev) +{ + struct tpm_chip *chip = spi_get_drvdata(dev); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + struct st33zp24_spi_phy *phy = tpm_dev->phy_id; + struct st33zp24_platform_data *pdata; + int ret; + + pdata = dev->dev.platform_data; + if (!pdata) { + dev_err(&dev->dev, "No platform data\n"); + return -ENODEV; + } + + /* store for late use */ + phy->io_lpcpd = pdata->io_lpcpd; + + if (gpio_is_valid(pdata->io_lpcpd)) { + ret = devm_gpio_request_one(&dev->dev, + pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, + "TPM IO_LPCPD"); + if (ret) { + dev_err(&dev->dev, "%s : reset gpio_request failed\n", + __FILE__); + return ret; + } + } + + return 0; +} + +/* + * st33zp24_spi_probe initialize the TPM device + * @param: dev, the spi_device drescription (TPM SPI description). + * @return: 0 in case of success. + * or a negative value describing the error. + */ +static int st33zp24_spi_probe(struct spi_device *dev) +{ + int ret; + struct st33zp24_platform_data *pdata; + struct st33zp24_spi_phy *phy; + + /* Check SPI platform functionnalities */ + if (!dev) { + pr_info("%s: dev is NULL. Device is not accessible.\n", + __func__); + return -ENODEV; + } + + phy = devm_kzalloc(&dev->dev, sizeof(struct st33zp24_spi_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->spi_device = dev; + + pdata = dev->dev.platform_data; + if (!pdata && dev->dev.of_node) { + ret = st33zp24_spi_of_request_resources(dev); + if (ret) + return ret; + } else if (pdata) { + ret = st33zp24_spi_request_resources(dev); + if (ret) + return ret; + } else if (ACPI_HANDLE(&dev->dev)) { + ret = st33zp24_spi_acpi_request_resources(dev); + if (ret) + return ret; + } + + phy->latency = st33zp24_spi_evaluate_latency(phy); + if (phy->latency <= 0) + return -ENODEV; + + return st33zp24_probe(phy, &spi_phy_ops, &dev->dev, dev->irq, + phy->io_lpcpd); +} + +/* + * st33zp24_spi_remove remove the TPM device + * @param: client, the spi_device drescription (TPM SPI description). + * @return: 0 in case of success. + */ +static int st33zp24_spi_remove(struct spi_device *dev) +{ + struct tpm_chip *chip = spi_get_drvdata(dev); + int ret; + + ret = st33zp24_remove(chip); + if (ret) + return ret; + + return 0; +} + +static const struct spi_device_id st33zp24_spi_id[] = { + {TPM_ST33_SPI, 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, st33zp24_spi_id); + +static const struct of_device_id of_st33zp24_spi_match[] = { + { .compatible = "st,st33zp24-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_st33zp24_spi_match); + +static const struct acpi_device_id st33zp24_spi_acpi_match[] = { + {"SMO3324"}, + {} +}; +MODULE_DEVICE_TABLE(acpi, st33zp24_spi_acpi_match); + +static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend, + st33zp24_pm_resume); + +static struct spi_driver st33zp24_spi_driver = { + .driver = { + .name = TPM_ST33_SPI, + .pm = &st33zp24_spi_ops, + .of_match_table = of_match_ptr(of_st33zp24_spi_match), + .acpi_match_table = ACPI_PTR(st33zp24_spi_acpi_match), + }, + .probe = st33zp24_spi_probe, + .remove = st33zp24_spi_remove, + .id_table = st33zp24_spi_id, +}; + +module_spi_driver(st33zp24_spi_driver); + +MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); +MODULE_DESCRIPTION("STM TPM 1.2 SPI ST33 Driver"); +MODULE_VERSION("1.3.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c new file mode 100644 index 000000000..694fc5888 --- /dev/null +++ b/drivers/char/tpm/st33zp24/st33zp24.c @@ -0,0 +1,662 @@ +/* + * STMicroelectronics TPM Linux driver for TPM ST33ZP24 + * Copyright (C) 2009 - 2016 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/freezer.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/sched.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include "../tpm.h" +#include "st33zp24.h" + +#define TPM_ACCESS 0x0 +#define TPM_STS 0x18 +#define TPM_DATA_FIFO 0x24 +#define TPM_INTF_CAPABILITY 0x14 +#define TPM_INT_STATUS 0x10 +#define TPM_INT_ENABLE 0x08 + +#define LOCALITY0 0 + +enum st33zp24_access { + TPM_ACCESS_VALID = 0x80, + TPM_ACCESS_ACTIVE_LOCALITY = 0x20, + TPM_ACCESS_REQUEST_PENDING = 0x04, + TPM_ACCESS_REQUEST_USE = 0x02, +}; + +enum st33zp24_status { + TPM_STS_VALID = 0x80, + TPM_STS_COMMAND_READY = 0x40, + TPM_STS_GO = 0x20, + TPM_STS_DATA_AVAIL = 0x10, + TPM_STS_DATA_EXPECT = 0x08, +}; + +enum st33zp24_int_flags { + TPM_GLOBAL_INT_ENABLE = 0x80, + TPM_INTF_CMD_READY_INT = 0x080, + TPM_INTF_FIFO_AVALAIBLE_INT = 0x040, + TPM_INTF_WAKE_UP_READY_INT = 0x020, + TPM_INTF_LOCALITY_CHANGE_INT = 0x004, + TPM_INTF_STS_VALID_INT = 0x002, + TPM_INTF_DATA_AVAIL_INT = 0x001, +}; + +enum tis_defaults { + TIS_SHORT_TIMEOUT = 750, + TIS_LONG_TIMEOUT = 2000, +}; + +/* + * clear_interruption clear the pending interrupt. + * @param: tpm_dev, the tpm device device. + * @return: the interrupt status value. + */ +static u8 clear_interruption(struct st33zp24_dev *tpm_dev) +{ + u8 interrupt; + + tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1); + tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1); + return interrupt; +} /* clear_interruption() */ + +/* + * st33zp24_cancel, cancel the current command execution or + * set STS to COMMAND READY. + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h + */ +static void st33zp24_cancel(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + u8 data; + + data = TPM_STS_COMMAND_READY; + tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1); +} /* st33zp24_cancel() */ + +/* + * st33zp24_status return the TPM_STS register + * @param: chip, the tpm chip description + * @return: the TPM_STS register value. + */ +static u8 st33zp24_status(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + u8 data; + + tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1); + return data; +} /* st33zp24_status() */ + +/* + * check_locality if the locality is active + * @param: chip, the tpm chip description + * @return: true if LOCALITY0 is active, otherwise false + */ +static bool check_locality(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + u8 data; + u8 status; + + status = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_ACCESS, &data, 1); + if (status && (data & + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) + return true; + + return false; +} /* check_locality() */ + +/* + * request_locality request the TPM locality + * @param: chip, the chip description + * @return: the active locality or negative value. + */ +static int request_locality(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + unsigned long stop; + long ret; + u8 data; + + if (check_locality(chip)) + return tpm_dev->locality; + + data = TPM_ACCESS_REQUEST_USE; + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1); + if (ret < 0) + return ret; + + stop = jiffies + chip->timeout_a; + + /* Request locality is usually effective after the request */ + do { + if (check_locality(chip)) + return tpm_dev->locality; + msleep(TPM_TIMEOUT); + } while (time_before(jiffies, stop)); + + /* could not get locality */ + return -EACCES; +} /* request_locality() */ + +/* + * release_locality release the active locality + * @param: chip, the tpm chip description. + */ +static void release_locality(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + u8 data; + + data = TPM_ACCESS_ACTIVE_LOCALITY; + + tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1); +} + +/* + * get_burstcount return the burstcount value + * @param: chip, the chip description + * return: the burstcount or negative value. + */ +static int get_burstcount(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + unsigned long stop; + int burstcnt, status; + u8 temp; + + stop = jiffies + chip->timeout_d; + do { + status = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS + 1, + &temp, 1); + if (status < 0) + return -EBUSY; + + burstcnt = temp; + status = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS + 2, + &temp, 1); + if (status < 0) + return -EBUSY; + + burstcnt |= temp << 8; + if (burstcnt) + return burstcnt; + msleep(TPM_TIMEOUT); + } while (time_before(jiffies, stop)); + return -EBUSY; +} /* get_burstcount() */ + + +/* + * wait_for_tpm_stat_cond + * @param: chip, chip description + * @param: mask, expected mask value + * @param: check_cancel, does the command expected to be canceled ? + * @param: canceled, did we received a cancel request ? + * @return: true if status == mask or if the command is canceled. + * false in other cases. + */ +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, + bool check_cancel, bool *canceled) +{ + u8 status = chip->ops->status(chip); + + *canceled = false; + if ((status & mask) == mask) + return true; + if (check_cancel && chip->ops->req_canceled(chip, status)) { + *canceled = true; + return true; + } + return false; +} + +/* + * wait_for_stat wait for a TPM_STS value + * @param: chip, the tpm chip description + * @param: mask, the value mask to wait + * @param: timeout, the timeout + * @param: queue, the wait queue. + * @param: check_cancel, does the command can be cancelled ? + * @return: the tpm status, 0 if success, -ETIME if timeout is reached. + */ +static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, + wait_queue_head_t *queue, bool check_cancel) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + unsigned long stop; + int ret = 0; + bool canceled = false; + bool condition; + u32 cur_intrs; + u8 status; + + /* check current status */ + status = st33zp24_status(chip); + if ((status & mask) == mask) + return 0; + + stop = jiffies + timeout; + + if (chip->flags & TPM_CHIP_FLAG_IRQ) { + cur_intrs = tpm_dev->intrs; + clear_interruption(tpm_dev); + enable_irq(tpm_dev->irq); + + do { + if (ret == -ERESTARTSYS && freezing(current)) + clear_thread_flag(TIF_SIGPENDING); + + timeout = stop - jiffies; + if ((long) timeout <= 0) + return -1; + + ret = wait_event_interruptible_timeout(*queue, + cur_intrs != tpm_dev->intrs, + timeout); + clear_interruption(tpm_dev); + condition = wait_for_tpm_stat_cond(chip, mask, + check_cancel, &canceled); + if (ret >= 0 && condition) { + if (canceled) + return -ECANCELED; + return 0; + } + } while (ret == -ERESTARTSYS && freezing(current)); + + disable_irq_nosync(tpm_dev->irq); + + } else { + do { + msleep(TPM_TIMEOUT); + status = chip->ops->status(chip); + if ((status & mask) == mask) + return 0; + } while (time_before(jiffies, stop)); + } + + return -ETIME; +} /* wait_for_stat() */ + +/* + * recv_data receive data + * @param: chip, the tpm chip description + * @param: buf, the buffer where the data are received + * @param: count, the number of data to receive + * @return: the number of bytes read from TPM FIFO. + */ +static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + int size = 0, burstcnt, len, ret; + + while (size < count && + wait_for_stat(chip, + TPM_STS_DATA_AVAIL | TPM_STS_VALID, + chip->timeout_c, + &tpm_dev->read_queue, true) == 0) { + burstcnt = get_burstcount(chip); + if (burstcnt < 0) + return burstcnt; + len = min_t(int, burstcnt, count - size); + ret = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_DATA_FIFO, + buf + size, len); + if (ret < 0) + return ret; + + size += len; + } + return size; +} + +/* + * tpm_ioserirq_handler the serirq irq handler + * @param: irq, the tpm chip description + * @param: dev_id, the description of the chip + * @return: the status of the handler. + */ +static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) +{ + struct tpm_chip *chip = dev_id; + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + + tpm_dev->intrs++; + wake_up_interruptible(&tpm_dev->read_queue); + disable_irq_nosync(tpm_dev->irq); + + return IRQ_HANDLED; +} /* tpm_ioserirq_handler() */ + +/* + * st33zp24_send send TPM commands through the I2C bus. + * + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h + * @param: buf, the buffer to send. + * @param: count, the number of bytes to send. + * @return: In case of success the number of bytes sent. + * In other case, a < 0 value describing the issue. + */ +static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf, + size_t len) +{ + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + u32 status, i, size, ordinal; + int burstcnt = 0; + int ret; + u8 data; + + if (len < TPM_HEADER_SIZE) + return -EBUSY; + + ret = request_locality(chip); + if (ret < 0) + return ret; + + status = st33zp24_status(chip); + if ((status & TPM_STS_COMMAND_READY) == 0) { + st33zp24_cancel(chip); + if (wait_for_stat + (chip, TPM_STS_COMMAND_READY, chip->timeout_b, + &tpm_dev->read_queue, false) < 0) { + ret = -ETIME; + goto out_err; + } + } + + for (i = 0; i < len - 1;) { + burstcnt = get_burstcount(chip); + if (burstcnt < 0) + return burstcnt; + size = min_t(int, len - i - 1, burstcnt); + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO, + buf + i, size); + if (ret < 0) + goto out_err; + + i += size; + } + + status = st33zp24_status(chip); + if ((status & TPM_STS_DATA_EXPECT) == 0) { + ret = -EIO; + goto out_err; + } + + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO, + buf + len - 1, 1); + if (ret < 0) + goto out_err; + + status = st33zp24_status(chip); + if ((status & TPM_STS_DATA_EXPECT) != 0) { + ret = -EIO; + goto out_err; + } + + data = TPM_STS_GO; + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1); + if (ret < 0) + goto out_err; + + if (chip->flags & TPM_CHIP_FLAG_IRQ) { + ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); + + ret = wait_for_stat(chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, + tpm_calc_ordinal_duration(chip, ordinal), + &tpm_dev->read_queue, false); + if (ret < 0) + goto out_err; + } + + return 0; +out_err: + st33zp24_cancel(chip); + release_locality(chip); + return ret; +} + +/* + * st33zp24_recv received TPM response through TPM phy. + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. + * @param: buf, the buffer to store datas. + * @param: count, the number of bytes to send. + * @return: In case of success the number of bytes received. + * In other case, a < 0 value describing the issue. + */ +static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf, + size_t count) +{ + int size = 0; + u32 expected; + + if (!chip) + return -EBUSY; + + if (count < TPM_HEADER_SIZE) { + size = -EIO; + goto out; + } + + size = recv_data(chip, buf, TPM_HEADER_SIZE); + if (size < TPM_HEADER_SIZE) { + dev_err(&chip->dev, "Unable to read header\n"); + goto out; + } + + expected = be32_to_cpu(*(__be32 *)(buf + 2)); + if (expected > count || expected < TPM_HEADER_SIZE) { + size = -EIO; + goto out; + } + + size += recv_data(chip, &buf[TPM_HEADER_SIZE], + expected - TPM_HEADER_SIZE); + if (size < expected) { + dev_err(&chip->dev, "Unable to read remainder of result\n"); + size = -ETIME; + } + +out: + st33zp24_cancel(chip); + release_locality(chip); + return size; +} + +/* + * st33zp24_req_canceled + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. + * @param: status, the TPM status. + * @return: Does TPM ready to compute a new command ? true. + */ +static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status) +{ + return (status == TPM_STS_COMMAND_READY); +} + +static const struct tpm_class_ops st33zp24_tpm = { + .flags = TPM_OPS_AUTO_STARTUP, + .send = st33zp24_send, + .recv = st33zp24_recv, + .cancel = st33zp24_cancel, + .status = st33zp24_status, + .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_canceled = st33zp24_req_canceled, +}; + +/* + * st33zp24_probe initialize the TPM device + * @param: client, the i2c_client drescription (TPM I2C description). + * @param: id, the i2c_device_id struct. + * @return: 0 in case of success. + * -1 in other case. + */ +int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops, + struct device *dev, int irq, int io_lpcpd) +{ + int ret; + u8 intmask = 0; + struct tpm_chip *chip; + struct st33zp24_dev *tpm_dev; + + chip = tpmm_chip_alloc(dev, &st33zp24_tpm); + if (IS_ERR(chip)) + return PTR_ERR(chip); + + tpm_dev = devm_kzalloc(dev, sizeof(struct st33zp24_dev), + GFP_KERNEL); + if (!tpm_dev) + return -ENOMEM; + + tpm_dev->phy_id = phy_id; + tpm_dev->ops = ops; + dev_set_drvdata(&chip->dev, tpm_dev); + + chip->timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + chip->timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT); + chip->timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + chip->timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + + tpm_dev->locality = LOCALITY0; + + if (irq) { + /* INTERRUPT Setup */ + init_waitqueue_head(&tpm_dev->read_queue); + tpm_dev->intrs = 0; + + if (request_locality(chip) != LOCALITY0) { + ret = -ENODEV; + goto _tpm_clean_answer; + } + + clear_interruption(tpm_dev); + ret = devm_request_irq(dev, irq, tpm_ioserirq_handler, + IRQF_TRIGGER_HIGH, "TPM SERIRQ management", + chip); + if (ret < 0) { + dev_err(&chip->dev, "TPM SERIRQ signals %d not available\n", + irq); + goto _tpm_clean_answer; + } + + intmask |= TPM_INTF_CMD_READY_INT + | TPM_INTF_STS_VALID_INT + | TPM_INTF_DATA_AVAIL_INT; + + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_ENABLE, + &intmask, 1); + if (ret < 0) + goto _tpm_clean_answer; + + intmask = TPM_GLOBAL_INT_ENABLE; + ret = tpm_dev->ops->send(tpm_dev->phy_id, (TPM_INT_ENABLE + 3), + &intmask, 1); + if (ret < 0) + goto _tpm_clean_answer; + + tpm_dev->irq = irq; + chip->flags |= TPM_CHIP_FLAG_IRQ; + + disable_irq_nosync(tpm_dev->irq); + } + + return tpm_chip_register(chip); +_tpm_clean_answer: + dev_info(&chip->dev, "TPM initialization fail\n"); + return ret; +} +EXPORT_SYMBOL(st33zp24_probe); + +/* + * st33zp24_remove remove the TPM device + * @param: tpm_data, the tpm phy. + * @return: 0 in case of success. + */ +int st33zp24_remove(struct tpm_chip *chip) +{ + tpm_chip_unregister(chip); + return 0; +} +EXPORT_SYMBOL(st33zp24_remove); + +#ifdef CONFIG_PM_SLEEP +/* + * st33zp24_pm_suspend suspend the TPM device + * @param: tpm_data, the tpm phy. + * @param: mesg, the power management message. + * @return: 0 in case of success. + */ +int st33zp24_pm_suspend(struct device *dev) +{ + struct tpm_chip *chip = dev_get_drvdata(dev); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + + int ret = 0; + + if (gpio_is_valid(tpm_dev->io_lpcpd)) + gpio_set_value(tpm_dev->io_lpcpd, 0); + else + ret = tpm_pm_suspend(dev); + + return ret; +} /* st33zp24_pm_suspend() */ +EXPORT_SYMBOL(st33zp24_pm_suspend); + +/* + * st33zp24_pm_resume resume the TPM device + * @param: tpm_data, the tpm phy. + * @return: 0 in case of success. + */ +int st33zp24_pm_resume(struct device *dev) +{ + struct tpm_chip *chip = dev_get_drvdata(dev); + struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); + int ret = 0; + + if (gpio_is_valid(tpm_dev->io_lpcpd)) { + gpio_set_value(tpm_dev->io_lpcpd, 1); + ret = wait_for_stat(chip, + TPM_STS_VALID, chip->timeout_b, + &tpm_dev->read_queue, false); + } else { + ret = tpm_pm_resume(dev); + if (!ret) + tpm_do_selftest(chip); + } + return ret; +} /* st33zp24_pm_resume() */ +EXPORT_SYMBOL(st33zp24_pm_resume); +#endif + +MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); +MODULE_DESCRIPTION("ST33ZP24 TPM 1.2 driver"); +MODULE_VERSION("1.3.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/tpm/st33zp24/st33zp24.h b/drivers/char/tpm/st33zp24/st33zp24.h new file mode 100644 index 000000000..20da0a849 --- /dev/null +++ b/drivers/char/tpm/st33zp24/st33zp24.h @@ -0,0 +1,49 @@ +/* + * STMicroelectronics TPM Linux driver for TPM ST33ZP24 + * Copyright (C) 2009 - 2016 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_ST33ZP24_H__ +#define __LOCAL_ST33ZP24_H__ + +#define TPM_WRITE_DIRECTION 0x80 +#define ST33ZP24_BUFSIZE 2048 + +struct st33zp24_dev { + struct tpm_chip *chip; + void *phy_id; + const struct st33zp24_phy_ops *ops; + int locality; + int irq; + u32 intrs; + int io_lpcpd; + wait_queue_head_t read_queue; +}; + + +struct st33zp24_phy_ops { + int (*send)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size); + int (*recv)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size); +}; + +#ifdef CONFIG_PM_SLEEP +int st33zp24_pm_suspend(struct device *dev); +int st33zp24_pm_resume(struct device *dev); +#endif + +int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops, + struct device *dev, int irq, int io_lpcpd); +int st33zp24_remove(struct tpm_chip *chip); +#endif /* __LOCAL_ST33ZP24_H__ */ |