diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/clk/davinci/pll.c | 1007 |
1 files changed, 1007 insertions, 0 deletions
diff --git a/drivers/clk/davinci/pll.c b/drivers/clk/davinci/pll.c new file mode 100644 index 000000000..796b42899 --- /dev/null +++ b/drivers/clk/davinci/pll.c @@ -0,0 +1,1007 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PLL clock driver for TI Davinci SoCs + * + * Copyright (C) 2018 David Lechner <david@lechnology.com> + * + * Based on arch/arm/mach-davinci/clock.c + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC + */ + +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/clk/davinci.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/notifier.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_data/clk-davinci-pll.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include "pll.h" + +#define MAX_NAME_SIZE 20 +#define OSCIN_CLK_NAME "oscin" + +#define REVID 0x000 +#define PLLCTL 0x100 +#define OCSEL 0x104 +#define PLLSECCTL 0x108 +#define PLLM 0x110 +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define OSCDIV 0x124 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define ALNCTL 0x140 +#define DCHANGE 0x144 +#define CKEN 0x148 +#define CKSTAT 0x14c +#define SYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 + +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLENSRC BIT(5) +#define PLLCTL_CLKMODE BIT(8) + +/* shared by most *DIV registers */ +#define DIV_RATIO_SHIFT 0 +#define DIV_RATIO_WIDTH 5 +#define DIV_ENABLE_SHIFT 15 + +#define PLLCMD_GOSET BIT(0) +#define PLLSTAT_GOSTAT BIT(0) + +#define CKEN_OBSCLK_SHIFT 1 +#define CKEN_AUXEN_SHIFT 0 + +/* + * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN + * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us + * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input + * is ~25MHz. Units are micro seconds. + */ +#define PLL_BYPASS_TIME 1 + +/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */ +#define PLL_RESET_TIME 1 + +/* + * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4 + * Units are micro seconds. + */ +#define PLL_LOCK_TIME 20 + +/** + * struct davinci_pll_clk - Main PLL clock (aka PLLOUT) + * @hw: clk_hw for the pll + * @base: Base memory address + * @pllm_min: The minimum allowable PLLM[PLLM] value + * @pllm_max: The maxiumum allowable PLLM[PLLM] value + * @pllm_mask: Bitmask for PLLM[PLLM] value + */ +struct davinci_pll_clk { + struct clk_hw hw; + void __iomem *base; + u32 pllm_min; + u32 pllm_max; + u32 pllm_mask; +}; + +#define to_davinci_pll_clk(_hw) \ + container_of((_hw), struct davinci_pll_clk, hw) + +static unsigned long davinci_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); + unsigned long rate = parent_rate; + u32 mult; + + mult = readl(pll->base + PLLM) & pll->pllm_mask; + rate *= mult + 1; + + return rate; +} + +static int davinci_pll_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); + struct clk_hw *parent = req->best_parent_hw; + unsigned long parent_rate = req->best_parent_rate; + unsigned long rate = req->rate; + unsigned long best_rate, r; + u32 mult; + + /* there is a limited range of valid outputs (see datasheet) */ + if (rate < req->min_rate) + return -EINVAL; + + rate = min(rate, req->max_rate); + mult = rate / parent_rate; + best_rate = parent_rate * mult; + + /* easy case when there is no PREDIV */ + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) { + if (best_rate < req->min_rate) + return -EINVAL; + + if (mult < pll->pllm_min || mult > pll->pllm_max) + return -EINVAL; + + req->rate = best_rate; + + return 0; + } + + /* see if the PREDIV clock can help us */ + best_rate = 0; + + for (mult = pll->pllm_min; mult <= pll->pllm_max; mult++) { + parent_rate = clk_hw_round_rate(parent, rate / mult); + r = parent_rate * mult; + if (r < req->min_rate) + continue; + if (r > rate || r > req->max_rate) + break; + if (r > best_rate) { + best_rate = r; + req->rate = best_rate; + req->best_parent_rate = parent_rate; + if (best_rate == rate) + break; + } + } + + return 0; +} + +static int davinci_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); + u32 mult; + + mult = rate / parent_rate; + writel(mult - 1, pll->base + PLLM); + + return 0; +} + +#ifdef CONFIG_DEBUG_FS +static void davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry); +#else +#define davinci_pll_debug_init NULL +#endif + +static const struct clk_ops davinci_pll_ops = { + .recalc_rate = davinci_pll_recalc_rate, + .determine_rate = davinci_pll_determine_rate, + .set_rate = davinci_pll_set_rate, + .debug_init = davinci_pll_debug_init, +}; + +/* PLLM works differently on DM365 */ +static unsigned long dm365_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); + unsigned long rate = parent_rate; + u32 mult; + + mult = readl(pll->base + PLLM) & pll->pllm_mask; + rate *= mult * 2; + + return rate; +} + +static const struct clk_ops dm365_pll_ops = { + .recalc_rate = dm365_pll_recalc_rate, + .debug_init = davinci_pll_debug_init, +}; + +/** + * davinci_pll_div_register - common *DIV clock implementation + * @dev: The PLL platform device or NULL + * @name: the clock name + * @parent_name: the parent clock name + * @reg: the *DIV register + * @fixed: if true, the divider is a fixed value + * @flags: bitmap of CLK_* flags from clock-provider.h + */ +static struct clk *davinci_pll_div_register(struct device *dev, + const char *name, + const char *parent_name, + void __iomem *reg, + bool fixed, u32 flags) +{ + const char * const *parent_names = parent_name ? &parent_name : NULL; + int num_parents = parent_name ? 1 : 0; + const struct clk_ops *divider_ops = &clk_divider_ops; + struct clk_gate *gate; + struct clk_divider *divider; + struct clk *clk; + int ret; + + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + gate->reg = reg; + gate->bit_idx = DIV_ENABLE_SHIFT; + + divider = kzalloc(sizeof(*divider), GFP_KERNEL); + if (!divider) { + ret = -ENOMEM; + goto err_free_gate; + } + + divider->reg = reg; + divider->shift = DIV_RATIO_SHIFT; + divider->width = DIV_RATIO_WIDTH; + + if (fixed) { + divider->flags |= CLK_DIVIDER_READ_ONLY; + divider_ops = &clk_divider_ro_ops; + } + + clk = clk_register_composite(dev, name, parent_names, num_parents, + NULL, NULL, ÷r->hw, divider_ops, + &gate->hw, &clk_gate_ops, flags); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto err_free_divider; + } + + return clk; + +err_free_divider: + kfree(divider); +err_free_gate: + kfree(gate); + + return ERR_PTR(ret); +} + +struct davinci_pllen_clk { + struct clk_hw hw; + void __iomem *base; +}; + +#define to_davinci_pllen_clk(_hw) \ + container_of((_hw), struct davinci_pllen_clk, hw) + +static const struct clk_ops davinci_pllen_ops = { + /* this clocks just uses the clock notification feature */ +}; + +/* + * The PLL has to be switched into bypass mode while we are chaning the rate, + * so we do that on the PLLEN clock since it is the end of the line. This will + * switch to bypass before any of the parent clocks (PREDIV, PLL, POSTDIV) are + * changed and will switch back to the PLL after the changes have been made. + */ +static int davinci_pllen_rate_change(struct notifier_block *nb, + unsigned long flags, void *data) +{ + struct clk_notifier_data *cnd = data; + struct clk_hw *hw = __clk_get_hw(cnd->clk); + struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw); + u32 ctrl; + + ctrl = readl(pll->base + PLLCTL); + + if (flags == PRE_RATE_CHANGE) { + /* Switch the PLL to bypass mode */ + ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); + writel(ctrl, pll->base + PLLCTL); + + udelay(PLL_BYPASS_TIME); + + /* Reset and enable PLL */ + ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); + writel(ctrl, pll->base + PLLCTL); + } else { + udelay(PLL_RESET_TIME); + + /* Bring PLL out of reset */ + ctrl |= PLLCTL_PLLRST; + writel(ctrl, pll->base + PLLCTL); + + udelay(PLL_LOCK_TIME); + + /* Remove PLL from bypass mode */ + ctrl |= PLLCTL_PLLEN; + writel(ctrl, pll->base + PLLCTL); + } + + return NOTIFY_OK; +} + +static struct notifier_block davinci_pllen_notifier = { + .notifier_call = davinci_pllen_rate_change, +}; + +/** + * davinci_pll_clk_register - Register a PLL clock + * @dev: The PLL platform device or NULL + * @info: The device-specific clock info + * @parent_name: The parent clock name + * @base: The PLL's memory region + * @cfgchip: CFGCHIP syscon regmap for info->unlock_reg or NULL + * + * This creates a series of clocks that represent the PLL. + * + * OSCIN > [PREDIV >] PLL > [POSTDIV >] PLLEN + * + * - OSCIN is the parent clock (on secondary PLL, may come from primary PLL) + * - PREDIV and POSTDIV are optional (depends on the PLL controller) + * - PLL is the PLL output (aka PLLOUT) + * - PLLEN is the bypass multiplexer + * + * Returns: The PLLOUT clock or a negative error code. + */ +struct clk *davinci_pll_clk_register(struct device *dev, + const struct davinci_pll_clk_info *info, + const char *parent_name, + void __iomem *base, + struct regmap *cfgchip) +{ + char prediv_name[MAX_NAME_SIZE]; + char pllout_name[MAX_NAME_SIZE]; + char postdiv_name[MAX_NAME_SIZE]; + char pllen_name[MAX_NAME_SIZE]; + struct clk_init_data init; + struct davinci_pll_clk *pllout; + struct davinci_pllen_clk *pllen; + struct clk *oscin_clk = NULL; + struct clk *prediv_clk = NULL; + struct clk *pllout_clk; + struct clk *postdiv_clk = NULL; + struct clk *pllen_clk; + int ret; + + if (info->flags & PLL_HAS_CLKMODE) { + /* + * If a PLL has PLLCTL[CLKMODE], then it is the primary PLL. + * We register a clock named "oscin" that serves as the internal + * "input clock" domain shared by both PLLs (if there are 2) + * and will be the parent clock to the AUXCLK, SYSCLKBP and + * OBSCLK domains. NB: The various TRMs use "OSCIN" to mean + * a number of different things. In this driver we use it to + * mean the signal after the PLLCTL[CLKMODE] switch. + */ + oscin_clk = clk_register_fixed_factor(dev, OSCIN_CLK_NAME, + parent_name, 0, 1, 1); + if (IS_ERR(oscin_clk)) + return oscin_clk; + + parent_name = OSCIN_CLK_NAME; + } + + if (info->flags & PLL_HAS_PREDIV) { + bool fixed = info->flags & PLL_PREDIV_FIXED_DIV; + u32 flags = 0; + + snprintf(prediv_name, MAX_NAME_SIZE, "%s_prediv", info->name); + + if (info->flags & PLL_PREDIV_ALWAYS_ENABLED) + flags |= CLK_IS_CRITICAL; + + /* Some? DM355 chips don't correctly report the PREDIV value */ + if (info->flags & PLL_PREDIV_FIXED8) + prediv_clk = clk_register_fixed_factor(dev, prediv_name, + parent_name, flags, 1, 8); + else + prediv_clk = davinci_pll_div_register(dev, prediv_name, + parent_name, base + PREDIV, fixed, flags); + if (IS_ERR(prediv_clk)) { + ret = PTR_ERR(prediv_clk); + goto err_unregister_oscin; + } + + parent_name = prediv_name; + } + + /* Unlock writing to PLL registers */ + if (info->unlock_reg) { + if (IS_ERR_OR_NULL(cfgchip)) + dev_warn(dev, "Failed to get CFGCHIP (%ld)\n", + PTR_ERR(cfgchip)); + else + regmap_write_bits(cfgchip, info->unlock_reg, + info->unlock_mask, 0); + } + + pllout = kzalloc(sizeof(*pllout), GFP_KERNEL); + if (!pllout) { + ret = -ENOMEM; + goto err_unregister_prediv; + } + + snprintf(pllout_name, MAX_NAME_SIZE, "%s_pllout", info->name); + + init.name = pllout_name; + if (info->flags & PLL_PLLM_2X) + init.ops = &dm365_pll_ops; + else + init.ops = &davinci_pll_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = 0; + + if (info->flags & PLL_HAS_PREDIV) + init.flags |= CLK_SET_RATE_PARENT; + + pllout->hw.init = &init; + pllout->base = base; + pllout->pllm_mask = info->pllm_mask; + pllout->pllm_min = info->pllm_min; + pllout->pllm_max = info->pllm_max; + + pllout_clk = clk_register(dev, &pllout->hw); + if (IS_ERR(pllout_clk)) { + ret = PTR_ERR(pllout_clk); + goto err_free_pllout; + } + + clk_hw_set_rate_range(&pllout->hw, info->pllout_min_rate, + info->pllout_max_rate); + + parent_name = pllout_name; + + if (info->flags & PLL_HAS_POSTDIV) { + bool fixed = info->flags & PLL_POSTDIV_FIXED_DIV; + u32 flags = CLK_SET_RATE_PARENT; + + snprintf(postdiv_name, MAX_NAME_SIZE, "%s_postdiv", info->name); + + if (info->flags & PLL_POSTDIV_ALWAYS_ENABLED) + flags |= CLK_IS_CRITICAL; + + postdiv_clk = davinci_pll_div_register(dev, postdiv_name, + parent_name, base + POSTDIV, fixed, flags); + if (IS_ERR(postdiv_clk)) { + ret = PTR_ERR(postdiv_clk); + goto err_unregister_pllout; + } + + parent_name = postdiv_name; + } + + pllen = kzalloc(sizeof(*pllen), GFP_KERNEL); + if (!pllen) { + ret = -ENOMEM; + goto err_unregister_postdiv; + } + + snprintf(pllen_name, MAX_NAME_SIZE, "%s_pllen", info->name); + + init.name = pllen_name; + init.ops = &davinci_pllen_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = CLK_SET_RATE_PARENT; + + pllen->hw.init = &init; + pllen->base = base; + + pllen_clk = clk_register(dev, &pllen->hw); + if (IS_ERR(pllen_clk)) { + ret = PTR_ERR(pllen_clk); + goto err_free_pllen; + } + + clk_notifier_register(pllen_clk, &davinci_pllen_notifier); + + return pllout_clk; + +err_free_pllen: + kfree(pllen); +err_unregister_postdiv: + clk_unregister(postdiv_clk); +err_unregister_pllout: + clk_unregister(pllout_clk); +err_free_pllout: + kfree(pllout); +err_unregister_prediv: + clk_unregister(prediv_clk); +err_unregister_oscin: + clk_unregister(oscin_clk); + + return ERR_PTR(ret); +} + +/** + * davinci_pll_auxclk_register - Register bypass clock (AUXCLK) + * @dev: The PLL platform device or NULL + * @name: The clock name + * @base: The PLL memory region + */ +struct clk *davinci_pll_auxclk_register(struct device *dev, + const char *name, + void __iomem *base) +{ + return clk_register_gate(dev, name, OSCIN_CLK_NAME, 0, base + CKEN, + CKEN_AUXEN_SHIFT, 0, NULL); +} + +/** + * davinci_pll_sysclkbp_clk_register - Register bypass divider clock (SYSCLKBP) + * @dev: The PLL platform device or NULL + * @name: The clock name + * @base: The PLL memory region + */ +struct clk *davinci_pll_sysclkbp_clk_register(struct device *dev, + const char *name, + void __iomem *base) +{ + return clk_register_divider(dev, name, OSCIN_CLK_NAME, 0, base + BPDIV, + DIV_RATIO_SHIFT, DIV_RATIO_WIDTH, + CLK_DIVIDER_READ_ONLY, NULL); +} + +/** + * davinci_pll_obsclk_register - Register oscillator divider clock (OBSCLK) + * @dev: The PLL platform device or NULL + * @info: The clock info + * @base: The PLL memory region + */ +struct clk * +davinci_pll_obsclk_register(struct device *dev, + const struct davinci_pll_obsclk_info *info, + void __iomem *base) +{ + struct clk_mux *mux; + struct clk_gate *gate; + struct clk_divider *divider; + struct clk *clk; + u32 oscdiv; + int ret; + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + mux->reg = base + OCSEL; + mux->table = info->table; + mux->mask = info->ocsrc_mask; + + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) { + ret = -ENOMEM; + goto err_free_mux; + } + + gate->reg = base + CKEN; + gate->bit_idx = CKEN_OBSCLK_SHIFT; + + divider = kzalloc(sizeof(*divider), GFP_KERNEL); + if (!divider) { + ret = -ENOMEM; + goto err_free_gate; + } + + divider->reg = base + OSCDIV; + divider->shift = DIV_RATIO_SHIFT; + divider->width = DIV_RATIO_WIDTH; + + /* make sure divider is enabled just in case bootloader disabled it */ + oscdiv = readl(base + OSCDIV); + oscdiv |= BIT(DIV_ENABLE_SHIFT); + writel(oscdiv, base + OSCDIV); + + clk = clk_register_composite(dev, info->name, info->parent_names, + info->num_parents, + &mux->hw, &clk_mux_ops, + ÷r->hw, &clk_divider_ops, + &gate->hw, &clk_gate_ops, 0); + + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto err_free_divider; + } + + return clk; + +err_free_divider: + kfree(divider); +err_free_gate: + kfree(gate); +err_free_mux: + kfree(mux); + + return ERR_PTR(ret); +} + +/* The PLL SYSCLKn clocks have a mechanism for synchronizing rate changes. */ +static int davinci_pll_sysclk_rate_change(struct notifier_block *nb, + unsigned long flags, void *data) +{ + struct clk_notifier_data *cnd = data; + struct clk_hw *hw = __clk_get_hw(clk_get_parent(cnd->clk)); + struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw); + u32 pllcmd, pllstat; + + switch (flags) { + case POST_RATE_CHANGE: + /* apply the changes */ + pllcmd = readl(pll->base + PLLCMD); + pllcmd |= PLLCMD_GOSET; + writel(pllcmd, pll->base + PLLCMD); + /* fallthrough */ + case PRE_RATE_CHANGE: + /* Wait until for outstanding changes to take effect */ + do { + pllstat = readl(pll->base + PLLSTAT); + } while (pllstat & PLLSTAT_GOSTAT); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block davinci_pll_sysclk_notifier = { + .notifier_call = davinci_pll_sysclk_rate_change, +}; + +/** + * davinci_pll_sysclk_register - Register divider clocks (SYSCLKn) + * @dev: The PLL platform device or NULL + * @info: The clock info + * @base: The PLL memory region + */ +struct clk * +davinci_pll_sysclk_register(struct device *dev, + const struct davinci_pll_sysclk_info *info, + void __iomem *base) +{ + const struct clk_ops *divider_ops = &clk_divider_ops; + struct clk_gate *gate; + struct clk_divider *divider; + struct clk *clk; + u32 reg; + u32 flags = 0; + int ret; + + /* PLLDIVn registers are not entirely consecutive */ + if (info->id < 4) + reg = PLLDIV1 + 4 * (info->id - 1); + else + reg = PLLDIV4 + 4 * (info->id - 4); + + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + gate->reg = base + reg; + gate->bit_idx = DIV_ENABLE_SHIFT; + + divider = kzalloc(sizeof(*divider), GFP_KERNEL); + if (!divider) { + ret = -ENOMEM; + goto err_free_gate; + } + + divider->reg = base + reg; + divider->shift = DIV_RATIO_SHIFT; + divider->width = info->ratio_width; + divider->flags = 0; + + if (info->flags & SYSCLK_FIXED_DIV) { + divider->flags |= CLK_DIVIDER_READ_ONLY; + divider_ops = &clk_divider_ro_ops; + } + + /* Only the ARM clock can change the parent PLL rate */ + if (info->flags & SYSCLK_ARM_RATE) + flags |= CLK_SET_RATE_PARENT; + + if (info->flags & SYSCLK_ALWAYS_ENABLED) + flags |= CLK_IS_CRITICAL; + + clk = clk_register_composite(dev, info->name, &info->parent_name, 1, + NULL, NULL, ÷r->hw, divider_ops, + &gate->hw, &clk_gate_ops, flags); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto err_free_divider; + } + + clk_notifier_register(clk, &davinci_pll_sysclk_notifier); + + return clk; + +err_free_divider: + kfree(divider); +err_free_gate: + kfree(gate); + + return ERR_PTR(ret); +} + +int of_davinci_pll_init(struct device *dev, struct device_node *node, + const struct davinci_pll_clk_info *info, + const struct davinci_pll_obsclk_info *obsclk_info, + const struct davinci_pll_sysclk_info **div_info, + u8 max_sysclk_id, + void __iomem *base, + struct regmap *cfgchip) +{ + struct device_node *child; + const char *parent_name; + struct clk *clk; + + if (info->flags & PLL_HAS_CLKMODE) + parent_name = of_clk_get_parent_name(node, 0); + else + parent_name = OSCIN_CLK_NAME; + + clk = davinci_pll_clk_register(dev, info, parent_name, base, cfgchip); + if (IS_ERR(clk)) { + dev_err(dev, "failed to register %s\n", info->name); + return PTR_ERR(clk); + } + + child = of_get_child_by_name(node, "pllout"); + if (of_device_is_available(child)) + of_clk_add_provider(child, of_clk_src_simple_get, clk); + of_node_put(child); + + child = of_get_child_by_name(node, "sysclk"); + if (of_device_is_available(child)) { + struct clk_onecell_data *clk_data; + struct clk **clks; + int n_clks = max_sysclk_id + 1; + int i; + + clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + + clks = kmalloc_array(n_clks, sizeof(*clks), GFP_KERNEL); + if (!clks) { + kfree(clk_data); + return -ENOMEM; + } + + clk_data->clks = clks; + clk_data->clk_num = n_clks; + + for (i = 0; i < n_clks; i++) + clks[i] = ERR_PTR(-ENOENT); + + for (; *div_info; div_info++) { + clk = davinci_pll_sysclk_register(dev, *div_info, base); + if (IS_ERR(clk)) + dev_warn(dev, "failed to register %s (%ld)\n", + (*div_info)->name, PTR_ERR(clk)); + else + clks[(*div_info)->id] = clk; + } + of_clk_add_provider(child, of_clk_src_onecell_get, clk_data); + } + of_node_put(child); + + child = of_get_child_by_name(node, "auxclk"); + if (of_device_is_available(child)) { + char child_name[MAX_NAME_SIZE]; + + snprintf(child_name, MAX_NAME_SIZE, "%s_auxclk", info->name); + + clk = davinci_pll_auxclk_register(dev, child_name, base); + if (IS_ERR(clk)) + dev_warn(dev, "failed to register %s (%ld)\n", + child_name, PTR_ERR(clk)); + else + of_clk_add_provider(child, of_clk_src_simple_get, clk); + } + of_node_put(child); + + child = of_get_child_by_name(node, "obsclk"); + if (of_device_is_available(child)) { + if (obsclk_info) + clk = davinci_pll_obsclk_register(dev, obsclk_info, base); + else + clk = ERR_PTR(-EINVAL); + + if (IS_ERR(clk)) + dev_warn(dev, "failed to register obsclk (%ld)\n", + PTR_ERR(clk)); + else + of_clk_add_provider(child, of_clk_src_simple_get, clk); + } + of_node_put(child); + + return 0; +} + +static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *dev) +{ + struct davinci_pll_platform_data *pdata = dev_get_platdata(dev); + + /* + * Platform data is optional, so allocate a new struct if one was not + * provided. For device tree, this will always be the case. + */ + if (!pdata) + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + /* for device tree, we need to fill in the struct */ + if (dev->of_node) + pdata->cfgchip = + syscon_regmap_lookup_by_compatible("ti,da830-cfgchip"); + + return pdata; +} + +/* needed in early boot for clocksource/clockevent */ +#ifdef CONFIG_ARCH_DAVINCI_DA850 +CLK_OF_DECLARE(da850_pll0, "ti,da850-pll0", of_da850_pll0_init); +#endif + +static const struct of_device_id davinci_pll_of_match[] = { +#ifdef CONFIG_ARCH_DAVINCI_DA850 + { .compatible = "ti,da850-pll1", .data = of_da850_pll1_init }, +#endif + { } +}; + +static const struct platform_device_id davinci_pll_id_table[] = { +#ifdef CONFIG_ARCH_DAVINCI_DA830 + { .name = "da830-pll", .driver_data = (kernel_ulong_t)da830_pll_init }, +#endif +#ifdef CONFIG_ARCH_DAVINCI_DA850 + { .name = "da850-pll0", .driver_data = (kernel_ulong_t)da850_pll0_init }, + { .name = "da850-pll1", .driver_data = (kernel_ulong_t)da850_pll1_init }, +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM355 + { .name = "dm355-pll1", .driver_data = (kernel_ulong_t)dm355_pll1_init }, + { .name = "dm355-pll2", .driver_data = (kernel_ulong_t)dm355_pll2_init }, +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM365 + { .name = "dm365-pll1", .driver_data = (kernel_ulong_t)dm365_pll1_init }, + { .name = "dm365-pll2", .driver_data = (kernel_ulong_t)dm365_pll2_init }, +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM644x + { .name = "dm644x-pll1", .driver_data = (kernel_ulong_t)dm644x_pll1_init }, + { .name = "dm644x-pll2", .driver_data = (kernel_ulong_t)dm644x_pll2_init }, +#endif +#ifdef CONFIG_ARCH_DAVINCI_DM646x + { .name = "dm646x-pll1", .driver_data = (kernel_ulong_t)dm646x_pll1_init }, + { .name = "dm646x-pll2", .driver_data = (kernel_ulong_t)dm646x_pll2_init }, +#endif + { } +}; + +typedef int (*davinci_pll_init)(struct device *dev, void __iomem *base, + struct regmap *cfgchip); + +static int davinci_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct davinci_pll_platform_data *pdata; + const struct of_device_id *of_id; + davinci_pll_init pll_init = NULL; + struct resource *res; + void __iomem *base; + + of_id = of_match_device(davinci_pll_of_match, dev); + if (of_id) + pll_init = of_id->data; + else if (pdev->id_entry) + pll_init = (void *)pdev->id_entry->driver_data; + + if (!pll_init) { + dev_err(dev, "unable to find driver data\n"); + return -EINVAL; + } + + pdata = davinci_pll_get_pdata(dev); + if (!pdata) { + dev_err(dev, "missing platform data\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + return pll_init(dev, base, pdata->cfgchip); +} + +static struct platform_driver davinci_pll_driver = { + .probe = davinci_pll_probe, + .driver = { + .name = "davinci-pll-clk", + .of_match_table = davinci_pll_of_match, + }, + .id_table = davinci_pll_id_table, +}; + +static int __init davinci_pll_driver_init(void) +{ + return platform_driver_register(&davinci_pll_driver); +} + +/* has to be postcore_initcall because PSC devices depend on PLL parent clocks */ +postcore_initcall(davinci_pll_driver_init); + +#ifdef CONFIG_DEBUG_FS +#include <linux/debugfs.h> + +#define DEBUG_REG(n) \ +{ \ + .name = #n, \ + .offset = n, \ +} + +static const struct debugfs_reg32 davinci_pll_regs[] = { + DEBUG_REG(REVID), + DEBUG_REG(PLLCTL), + DEBUG_REG(OCSEL), + DEBUG_REG(PLLSECCTL), + DEBUG_REG(PLLM), + DEBUG_REG(PREDIV), + DEBUG_REG(PLLDIV1), + DEBUG_REG(PLLDIV2), + DEBUG_REG(PLLDIV3), + DEBUG_REG(OSCDIV), + DEBUG_REG(POSTDIV), + DEBUG_REG(BPDIV), + DEBUG_REG(PLLCMD), + DEBUG_REG(PLLSTAT), + DEBUG_REG(ALNCTL), + DEBUG_REG(DCHANGE), + DEBUG_REG(CKEN), + DEBUG_REG(CKSTAT), + DEBUG_REG(SYSTAT), + DEBUG_REG(PLLDIV4), + DEBUG_REG(PLLDIV5), + DEBUG_REG(PLLDIV6), + DEBUG_REG(PLLDIV7), + DEBUG_REG(PLLDIV8), + DEBUG_REG(PLLDIV9), +}; + +static void davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry) +{ + struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); + struct debugfs_regset32 *regset; + + regset = kzalloc(sizeof(*regset), GFP_KERNEL); + if (!regset) + return; + + regset->regs = davinci_pll_regs; + regset->nregs = ARRAY_SIZE(davinci_pll_regs); + regset->base = pll->base; + + debugfs_create_regset32("registers", 0400, dentry, regset); +} +#endif |