diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/crypto/bcm/cipher.h | 483 |
1 files changed, 483 insertions, 0 deletions
diff --git a/drivers/crypto/bcm/cipher.h b/drivers/crypto/bcm/cipher.h new file mode 100644 index 000000000..36452d26c --- /dev/null +++ b/drivers/crypto/bcm/cipher.h @@ -0,0 +1,483 @@ +/* + * Copyright 2016 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation (the "GPL"). + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License version 2 (GPLv2) for more details. + * + * You should have received a copy of the GNU General Public License + * version 2 (GPLv2) along with this source code. + */ + +#ifndef _CIPHER_H +#define _CIPHER_H + +#include <linux/atomic.h> +#include <linux/mailbox/brcm-message.h> +#include <linux/mailbox_client.h> +#include <crypto/aes.h> +#include <crypto/internal/hash.h> +#include <crypto/aead.h> +#include <crypto/gcm.h> +#include <crypto/sha.h> +#include <crypto/sha3.h> + +#include "spu.h" +#include "spum.h" +#include "spu2.h" + +/* Driver supports up to MAX_SPUS SPU blocks */ +#define MAX_SPUS 16 + +#define ARC4_MIN_KEY_SIZE 1 +#define ARC4_MAX_KEY_SIZE 256 +#define ARC4_BLOCK_SIZE 1 +#define ARC4_STATE_SIZE 4 + +#define CCM_AES_IV_SIZE 16 +#define CCM_ESP_IV_SIZE 8 +#define RFC4543_ICV_SIZE 16 + +#define MAX_KEY_SIZE ARC4_MAX_KEY_SIZE +#define MAX_IV_SIZE AES_BLOCK_SIZE +#define MAX_DIGEST_SIZE SHA3_512_DIGEST_SIZE +#define MAX_ASSOC_SIZE 512 + +/* size of salt value for AES-GCM-ESP and AES-CCM-ESP */ +#define GCM_ESP_SALT_SIZE 4 +#define CCM_ESP_SALT_SIZE 3 +#define MAX_SALT_SIZE GCM_ESP_SALT_SIZE +#define GCM_ESP_SALT_OFFSET 0 +#define CCM_ESP_SALT_OFFSET 1 + +#define GCM_ESP_DIGESTSIZE 16 + +#define MAX_HASH_BLOCK_SIZE SHA512_BLOCK_SIZE + +/* + * Maximum number of bytes from a non-final hash request that can be deferred + * until more data is available. With new crypto API framework, this + * can be no more than one block of data. + */ +#define HASH_CARRY_MAX MAX_HASH_BLOCK_SIZE + +/* Force at least 4-byte alignment of all SPU message fields */ +#define SPU_MSG_ALIGN 4 + +/* Number of times to resend mailbox message if mb queue is full */ +#define SPU_MB_RETRY_MAX 1000 + +/* op_counts[] indexes */ +enum op_type { + SPU_OP_CIPHER, + SPU_OP_HASH, + SPU_OP_HMAC, + SPU_OP_AEAD, + SPU_OP_NUM +}; + +enum spu_spu_type { + SPU_TYPE_SPUM, + SPU_TYPE_SPU2, +}; + +/* + * SPUM_NS2 and SPUM_NSP are the SPU-M block on Northstar 2 and Northstar Plus, + * respectively. + */ +enum spu_spu_subtype { + SPU_SUBTYPE_SPUM_NS2, + SPU_SUBTYPE_SPUM_NSP, + SPU_SUBTYPE_SPU2_V1, + SPU_SUBTYPE_SPU2_V2 +}; + +struct spu_type_subtype { + enum spu_spu_type type; + enum spu_spu_subtype subtype; +}; + +struct cipher_op { + enum spu_cipher_alg alg; + enum spu_cipher_mode mode; +}; + +struct auth_op { + enum hash_alg alg; + enum hash_mode mode; +}; + +struct iproc_alg_s { + u32 type; + union { + struct crypto_alg crypto; + struct ahash_alg hash; + struct aead_alg aead; + } alg; + struct cipher_op cipher_info; + struct auth_op auth_info; + bool auth_first; + bool registered; +}; + +/* + * Buffers for a SPU request/reply message pair. All part of one structure to + * allow a single alloc per request. + */ +struct spu_msg_buf { + /* Request message fragments */ + + /* + * SPU request message header. For SPU-M, holds MH, EMH, SCTX, BDESC, + * and BD header. For SPU2, holds FMD, OMD. + */ + u8 bcm_spu_req_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; + + /* IV or counter. Size to include salt. Also used for XTS tweek. */ + u8 iv_ctr[ALIGN(2 * AES_BLOCK_SIZE, SPU_MSG_ALIGN)]; + + /* Hash digest. request and response. */ + u8 digest[ALIGN(MAX_DIGEST_SIZE, SPU_MSG_ALIGN)]; + + /* SPU request message padding */ + u8 spu_req_pad[ALIGN(SPU_PAD_LEN_MAX, SPU_MSG_ALIGN)]; + + /* SPU-M request message STATUS field */ + u8 tx_stat[ALIGN(SPU_TX_STATUS_LEN, SPU_MSG_ALIGN)]; + + /* Response message fragments */ + + /* SPU response message header */ + u8 spu_resp_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; + + /* SPU response message STATUS field padding */ + u8 rx_stat_pad[ALIGN(SPU_STAT_PAD_MAX, SPU_MSG_ALIGN)]; + + /* SPU response message STATUS field */ + u8 rx_stat[ALIGN(SPU_RX_STATUS_LEN, SPU_MSG_ALIGN)]; + + union { + /* Buffers only used for ablkcipher */ + struct { + /* + * Field used for either SUPDT when RC4 is used + * -OR- tweak value when XTS/AES is used + */ + u8 supdt_tweak[ALIGN(SPU_SUPDT_LEN, SPU_MSG_ALIGN)]; + } c; + + /* Buffers only used for aead */ + struct { + /* SPU response pad for GCM data */ + u8 gcmpad[ALIGN(AES_BLOCK_SIZE, SPU_MSG_ALIGN)]; + + /* SPU request msg padding for GCM AAD */ + u8 req_aad_pad[ALIGN(SPU_PAD_LEN_MAX, SPU_MSG_ALIGN)]; + + /* SPU response data to be discarded */ + u8 resp_aad[ALIGN(MAX_ASSOC_SIZE + MAX_IV_SIZE, + SPU_MSG_ALIGN)]; + } a; + }; +}; + +struct iproc_ctx_s { + u8 enckey[MAX_KEY_SIZE + ARC4_STATE_SIZE]; + unsigned int enckeylen; + + u8 authkey[MAX_KEY_SIZE + ARC4_STATE_SIZE]; + unsigned int authkeylen; + + u8 salt[MAX_SALT_SIZE]; + unsigned int salt_len; + unsigned int salt_offset; + u8 iv[MAX_IV_SIZE]; + + unsigned int digestsize; + + struct iproc_alg_s *alg; + bool is_esp; + + struct cipher_op cipher; + enum spu_cipher_type cipher_type; + + struct auth_op auth; + bool auth_first; + + /* + * The maximum length in bytes of the payload in a SPU message for this + * context. For SPU-M, the payload is the combination of AAD and data. + * For SPU2, the payload is just data. A value of SPU_MAX_PAYLOAD_INF + * indicates that there is no limit to the length of the SPU message + * payload. + */ + unsigned int max_payload; + + struct crypto_aead *fallback_cipher; + + /* auth_type is determined during processing of request */ + + u8 ipad[MAX_HASH_BLOCK_SIZE]; + u8 opad[MAX_HASH_BLOCK_SIZE]; + + /* + * Buffer to hold SPU message header template. Template is created at + * setkey time for ablkcipher requests, since most of the fields in the + * header are known at that time. At request time, just fill in a few + * missing pieces related to length of data in the request and IVs, etc. + */ + u8 bcm_spu_req_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; + + /* Length of SPU request header */ + u16 spu_req_hdr_len; + + /* Expected length of SPU response header */ + u16 spu_resp_hdr_len; + + /* + * shash descriptor - needed to perform incremental hashing in + * in software, when hw doesn't support it. + */ + struct shash_desc *shash; + + bool is_rfc4543; /* RFC 4543 style of GMAC */ +}; + +/* state from iproc_reqctx_s necessary for hash state export/import */ +struct spu_hash_export_s { + unsigned int total_todo; + unsigned int total_sent; + u8 hash_carry[HASH_CARRY_MAX]; + unsigned int hash_carry_len; + u8 incr_hash[MAX_DIGEST_SIZE]; + bool is_sw_hmac; +}; + +struct iproc_reqctx_s { + /* general context */ + struct crypto_async_request *parent; + + /* only valid after enqueue() */ + struct iproc_ctx_s *ctx; + + u8 chan_idx; /* Mailbox channel to be used to submit this request */ + + /* total todo, rx'd, and sent for this request */ + unsigned int total_todo; + unsigned int total_received; /* only valid for ablkcipher */ + unsigned int total_sent; + + /* + * num bytes sent to hw from the src sg in this request. This can differ + * from total_sent for incremental hashing. total_sent includes previous + * init() and update() data. src_sent does not. + */ + unsigned int src_sent; + + /* + * For AEAD requests, start of associated data. This will typically + * point to the beginning of the src scatterlist from the request, + * since assoc data is at the beginning of the src scatterlist rather + * than in its own sg. + */ + struct scatterlist *assoc; + + /* + * scatterlist entry and offset to start of data for next chunk. Crypto + * API src scatterlist for AEAD starts with AAD, if present. For first + * chunk, src_sg is sg entry at beginning of input data (after AAD). + * src_skip begins at the offset in that sg entry where data begins. + */ + struct scatterlist *src_sg; + int src_nents; /* Number of src entries with data */ + u32 src_skip; /* bytes of current sg entry already used */ + + /* + * Same for destination. For AEAD, if there is AAD, output data must + * be written at offset following AAD. + */ + struct scatterlist *dst_sg; + int dst_nents; /* Number of dst entries with data */ + u32 dst_skip; /* bytes of current sg entry already written */ + + /* Mailbox message used to send this request to PDC driver */ + struct brcm_message mb_mssg; + + bool bd_suppress; /* suppress BD field in SPU response? */ + + /* cipher context */ + bool is_encrypt; + + /* + * CBC mode: IV. CTR mode: counter. Else empty. Used as a DMA + * buffer for AEAD requests. So allocate as DMAable memory. If IV + * concatenated with salt, includes the salt. + */ + u8 *iv_ctr; + /* Length of IV or counter, in bytes */ + unsigned int iv_ctr_len; + + /* + * Hash requests can be of any size, whether initial, update, or final. + * A non-final request must be submitted to the SPU as an integral + * number of blocks. This may leave data at the end of the request + * that is not a full block. Since the request is non-final, it cannot + * be padded. So, we write the remainder to this hash_carry buffer and + * hold it until the next request arrives. The carry data is then + * submitted at the beginning of the data in the next SPU msg. + * hash_carry_len is the number of bytes currently in hash_carry. These + * fields are only used for ahash requests. + */ + u8 hash_carry[HASH_CARRY_MAX]; + unsigned int hash_carry_len; + unsigned int is_final; /* is this the final for the hash op? */ + + /* + * Digest from incremental hash is saved here to include in next hash + * operation. Cannot be stored in req->result for truncated hashes, + * since result may be sized for final digest. Cannot be saved in + * msg_buf because that gets deleted between incremental hash ops + * and is not saved as part of export(). + */ + u8 incr_hash[MAX_DIGEST_SIZE]; + + /* hmac context */ + bool is_sw_hmac; + + /* aead context */ + struct crypto_tfm *old_tfm; + crypto_completion_t old_complete; + void *old_data; + + gfp_t gfp; + + /* Buffers used to build SPU request and response messages */ + struct spu_msg_buf msg_buf; +}; + +/* + * Structure encapsulates a set of function pointers specific to the type of + * SPU hardware running. These functions handling creation and parsing of + * SPU request messages and SPU response messages. Includes hardware-specific + * values read from device tree. + */ +struct spu_hw { + void (*spu_dump_msg_hdr)(u8 *buf, unsigned int buf_len); + u32 (*spu_ctx_max_payload)(enum spu_cipher_alg cipher_alg, + enum spu_cipher_mode cipher_mode, + unsigned int blocksize); + u32 (*spu_payload_length)(u8 *spu_hdr); + u16 (*spu_response_hdr_len)(u16 auth_key_len, u16 enc_key_len, + bool is_hash); + u16 (*spu_hash_pad_len)(enum hash_alg hash_alg, + enum hash_mode hash_mode, u32 chunksize, + u16 hash_block_size); + u32 (*spu_gcm_ccm_pad_len)(enum spu_cipher_mode cipher_mode, + unsigned int data_size); + u32 (*spu_assoc_resp_len)(enum spu_cipher_mode cipher_mode, + unsigned int assoc_len, + unsigned int iv_len, bool is_encrypt); + u8 (*spu_aead_ivlen)(enum spu_cipher_mode cipher_mode, + u16 iv_len); + enum hash_type (*spu_hash_type)(u32 src_sent); + u32 (*spu_digest_size)(u32 digest_size, enum hash_alg alg, + enum hash_type); + u32 (*spu_create_request)(u8 *spu_hdr, + struct spu_request_opts *req_opts, + struct spu_cipher_parms *cipher_parms, + struct spu_hash_parms *hash_parms, + struct spu_aead_parms *aead_parms, + unsigned int data_size); + u16 (*spu_cipher_req_init)(u8 *spu_hdr, + struct spu_cipher_parms *cipher_parms); + void (*spu_cipher_req_finish)(u8 *spu_hdr, + u16 spu_req_hdr_len, + unsigned int is_inbound, + struct spu_cipher_parms *cipher_parms, + bool update_key, + unsigned int data_size); + void (*spu_request_pad)(u8 *pad_start, u32 gcm_padding, + u32 hash_pad_len, enum hash_alg auth_alg, + enum hash_mode auth_mode, + unsigned int total_sent, u32 status_padding); + u8 (*spu_xts_tweak_in_payload)(void); + u8 (*spu_tx_status_len)(void); + u8 (*spu_rx_status_len)(void); + int (*spu_status_process)(u8 *statp); + void (*spu_ccm_update_iv)(unsigned int digestsize, + struct spu_cipher_parms *cipher_parms, + unsigned int assoclen, unsigned int chunksize, + bool is_encrypt, bool is_esp); + u32 (*spu_wordalign_padlen)(u32 data_size); + + /* The base virtual address of the SPU hw registers */ + void __iomem *reg_vbase[MAX_SPUS]; + + /* Version of the SPU hardware */ + enum spu_spu_type spu_type; + + /* Sub-version of the SPU hardware */ + enum spu_spu_subtype spu_subtype; + + /* The number of SPUs on this platform */ + u32 num_spu; + + /* The number of SPU channels on this platform */ + u32 num_chan; +}; + +struct bcm_device_private { + struct platform_device *pdev; + + struct spu_hw spu; + + atomic_t session_count; /* number of streams active */ + atomic_t stream_count; /* monotonic counter for streamID's */ + + /* Length of BCM header. Set to 0 when hw does not expect BCM HEADER. */ + u8 bcm_hdr_len; + + /* The index of the channel to use for the next crypto request */ + atomic_t next_chan; + + struct dentry *debugfs_dir; + struct dentry *debugfs_stats; + + /* Number of request bytes processed and result bytes returned */ + atomic64_t bytes_in; + atomic64_t bytes_out; + + /* Number of operations of each type */ + atomic_t op_counts[SPU_OP_NUM]; + + atomic_t cipher_cnt[CIPHER_ALG_LAST][CIPHER_MODE_LAST]; + atomic_t hash_cnt[HASH_ALG_LAST]; + atomic_t hmac_cnt[HASH_ALG_LAST]; + atomic_t aead_cnt[AEAD_TYPE_LAST]; + + /* Number of calls to setkey() for each operation type */ + atomic_t setkey_cnt[SPU_OP_NUM]; + + /* Number of times request was resubmitted because mb was full */ + atomic_t mb_no_spc; + + /* Number of mailbox send failures */ + atomic_t mb_send_fail; + + /* Number of ICV check failures for AEAD messages */ + atomic_t bad_icv; + + struct mbox_client mcl; + + /* Array of mailbox channel pointers, one for each channel */ + struct mbox_chan **mbox; +}; + +extern struct bcm_device_private iproc_priv; + +#endif |