diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/crypto/bcm/spum.h | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/drivers/crypto/bcm/spum.h b/drivers/crypto/bcm/spum.h new file mode 100644 index 000000000..d0a5b5828 --- /dev/null +++ b/drivers/crypto/bcm/spum.h @@ -0,0 +1,174 @@ +/* + * Copyright 2016 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation (the "GPL"). + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License version 2 (GPLv2) for more details. + * + * You should have received a copy of the GNU General Public License + * version 2 (GPLv2) along with this source code. + */ + +/* + * This file contains SPU message definitions specific to SPU-M. + */ + +#ifndef _SPUM_H_ +#define _SPUM_H_ + +#define SPU_CRYPTO_OPERATION_GENERIC 0x1 + +/* Length of STATUS field in tx and rx packets */ +#define SPU_TX_STATUS_LEN 4 + +/* SPU-M error codes */ +#define SPU_STATUS_MASK 0x0000FF00 +#define SPU_STATUS_SUCCESS 0x00000000 +#define SPU_STATUS_INVALID_ICV 0x00000100 + +#define SPU_STATUS_ERROR_FLAG 0x00020000 + +/* Request message. MH + EMH + BDESC + BD header */ +#define SPU_REQ_FIXED_LEN 24 + +/* + * Max length of a SPU message header. Used to allocate a buffer where + * the SPU message header is constructed. Can be used for either a SPU-M + * header or a SPU2 header. + * For SPU-M, sum of the following: + * MH - 4 bytes + * EMH - 4 + * SCTX - 3 + + * max auth key len - 64 + * max cipher key len - 264 (RC4) + * max IV len - 16 + * BDESC - 12 + * BD header - 4 + * Total: 371 + * + * For SPU2, FMD_SIZE (32) plus lengths of hash and cipher keys, + * hash and cipher IVs. If SPU2 does not support RC4, then + */ +#define SPU_HEADER_ALLOC_LEN (SPU_REQ_FIXED_LEN + MAX_KEY_SIZE + \ + MAX_KEY_SIZE + MAX_IV_SIZE) + +/* + * Response message header length. Normally MH, EMH, BD header, but when + * BD_SUPPRESS is used for hash requests, there is no BD header. + */ +#define SPU_RESP_HDR_LEN 12 +#define SPU_HASH_RESP_HDR_LEN 8 + +/* + * Max value that can be represented in the Payload Length field of the BD + * header. This is a 16-bit field. + */ +#define SPUM_NS2_MAX_PAYLOAD (BIT(16) - 1) + +/* + * NSP SPU is limited to ~9KB because of FA2 FIFO size limitations; + * Set MAX_PAYLOAD to 8k to allow for addition of header, digest, etc. + * and stay within limitation. + */ + +#define SPUM_NSP_MAX_PAYLOAD 8192 + +/* Buffer Descriptor Header [BDESC]. SPU in big-endian mode. */ +struct BDESC_HEADER { + u16 offset_mac; /* word 0 [31-16] */ + u16 length_mac; /* word 0 [15-0] */ + u16 offset_crypto; /* word 1 [31-16] */ + u16 length_crypto; /* word 1 [15-0] */ + u16 offset_icv; /* word 2 [31-16] */ + u16 offset_iv; /* word 2 [15-0] */ +}; + +/* Buffer Data Header [BD]. SPU in big-endian mode. */ +struct BD_HEADER { + u16 size; + u16 prev_length; +}; + +/* Command Context Header. SPU-M in big endian mode. */ +struct MHEADER { + u8 flags; /* [31:24] */ + u8 op_code; /* [23:16] */ + u16 reserved; /* [15:0] */ +}; + +/* MH header flags bits */ +#define MH_SUPDT_PRES BIT(0) +#define MH_HASH_PRES BIT(2) +#define MH_BD_PRES BIT(3) +#define MH_MFM_PRES BIT(4) +#define MH_BDESC_PRES BIT(5) +#define MH_SCTX_PRES BIT(7) + +/* SCTX word 0 bit offsets and fields masks */ +#define SCTX_SIZE 0x000000FF + +/* SCTX word 1 bit shifts and field masks */ +#define UPDT_OFST 0x000000FF /* offset of SCTX updateable fld */ +#define HASH_TYPE 0x00000300 /* hash alg operation type */ +#define HASH_TYPE_SHIFT 8 +#define HASH_MODE 0x00001C00 /* one of spu2_hash_mode */ +#define HASH_MODE_SHIFT 10 +#define HASH_ALG 0x0000E000 /* hash algorithm */ +#define HASH_ALG_SHIFT 13 +#define CIPHER_TYPE 0x00030000 /* encryption operation type */ +#define CIPHER_TYPE_SHIFT 16 +#define CIPHER_MODE 0x001C0000 /* encryption mode */ +#define CIPHER_MODE_SHIFT 18 +#define CIPHER_ALG 0x00E00000 /* encryption algo */ +#define CIPHER_ALG_SHIFT 21 +#define ICV_IS_512 BIT(27) +#define ICV_IS_512_SHIFT 27 +#define CIPHER_ORDER BIT(30) +#define CIPHER_ORDER_SHIFT 30 +#define CIPHER_INBOUND BIT(31) +#define CIPHER_INBOUND_SHIFT 31 + +/* SCTX word 2 bit shifts and field masks */ +#define EXP_IV_SIZE 0x7 +#define IV_OFFSET BIT(3) +#define IV_OFFSET_SHIFT 3 +#define GEN_IV BIT(5) +#define GEN_IV_SHIFT 5 +#define EXPLICIT_IV BIT(6) +#define EXPLICIT_IV_SHIFT 6 +#define SCTX_IV BIT(7) +#define SCTX_IV_SHIFT 7 +#define ICV_SIZE 0x0F00 +#define ICV_SIZE_SHIFT 8 +#define CHECK_ICV BIT(12) +#define CHECK_ICV_SHIFT 12 +#define INSERT_ICV BIT(13) +#define INSERT_ICV_SHIFT 13 +#define BD_SUPPRESS BIT(19) +#define BD_SUPPRESS_SHIFT 19 + +/* Generic Mode Security Context Structure [SCTX] */ +struct SCTX { +/* word 0: protocol flags */ + u32 proto_flags; + +/* word 1: cipher flags */ + u32 cipher_flags; + +/* word 2: Extended cipher flags */ + u32 ecf; + +}; + +struct SPUHEADER { + struct MHEADER mh; + u32 emh; + struct SCTX sa; +}; + +#endif /* _SPUM_H_ */ |