diff options
Diffstat (limited to 'drivers/crypto/cavium/nitrox/nitrox_req.h')
| -rw-r--r-- | drivers/crypto/cavium/nitrox/nitrox_req.h | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/drivers/crypto/cavium/nitrox/nitrox_req.h b/drivers/crypto/cavium/nitrox/nitrox_req.h new file mode 100644 index 000000000..19f0a20e3 --- /dev/null +++ b/drivers/crypto/cavium/nitrox/nitrox_req.h @@ -0,0 +1,453 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __NITROX_REQ_H +#define __NITROX_REQ_H + +#include <linux/dma-mapping.h> +#include <crypto/aes.h> + +#include "nitrox_dev.h" + +/** + * struct gphdr - General purpose Header + * @param0: first parameter. + * @param1: second parameter. + * @param2: third parameter. + * @param3: fourth parameter. + * + * Params tell the iv and enc/dec data offsets. + */ +struct gphdr { + __be16 param0; + __be16 param1; + __be16 param2; + __be16 param3; +}; + +/** + * struct se_req_ctrl - SE request information. + * @arg: Minor number of the opcode + * @ctxc: Context control. + * @unca: Uncertainity enabled. + * @info: Additional information for SE cores. + * @ctxl: Context length in bytes. + * @uddl: User defined data length + */ +union se_req_ctrl { + u64 value; + struct { + u64 raz : 22; + u64 arg : 8; + u64 ctxc : 2; + u64 unca : 1; + u64 info : 3; + u64 unc : 8; + u64 ctxl : 12; + u64 uddl : 8; + } s; +}; + +struct nitrox_sglist { + u16 len; + u16 raz0; + u32 raz1; + dma_addr_t dma; +}; + +#define MAX_IV_LEN 16 + +/** + * struct se_crypto_request - SE crypto request structure. + * @opcode: Request opcode (enc/dec) + * @flags: flags from crypto subsystem + * @ctx_handle: Crypto context handle. + * @gph: GP Header + * @ctrl: Request Information. + * @in: Input sglist + * @out: Output sglist + */ +struct se_crypto_request { + u8 opcode; + gfp_t gfp; + u32 flags; + u64 ctx_handle; + + struct gphdr gph; + union se_req_ctrl ctrl; + + u8 iv[MAX_IV_LEN]; + u16 ivsize; + + struct scatterlist *src; + struct scatterlist *dst; +}; + +/* Crypto opcodes */ +#define FLEXI_CRYPTO_ENCRYPT_HMAC 0x33 +#define ENCRYPT 0 +#define DECRYPT 1 + +/* IV from context */ +#define IV_FROM_CTX 0 +/* IV from Input data */ +#define IV_FROM_DPTR 1 + +/** + * cipher opcodes for firmware + */ +enum flexi_cipher { + CIPHER_NULL = 0, + CIPHER_3DES_CBC, + CIPHER_3DES_ECB, + CIPHER_AES_CBC, + CIPHER_AES_ECB, + CIPHER_AES_CFB, + CIPHER_AES_CTR, + CIPHER_AES_GCM, + CIPHER_AES_XTS, + CIPHER_AES_CCM, + CIPHER_AES_CBC_CTS, + CIPHER_AES_ECB_CTS, + CIPHER_INVALID +}; + +/** + * struct crypto_keys - Crypto keys + * @key: Encryption key or KEY1 for AES-XTS + * @iv: Encryption IV or Tweak for AES-XTS + */ +struct crypto_keys { + union { + u8 key[AES_MAX_KEY_SIZE]; + u8 key1[AES_MAX_KEY_SIZE]; + } u; + u8 iv[AES_BLOCK_SIZE]; +}; + +/** + * struct auth_keys - Authentication keys + * @ipad: IPAD or KEY2 for AES-XTS + * @opad: OPAD or AUTH KEY if auth_input_type = 1 + */ +struct auth_keys { + union { + u8 ipad[64]; + u8 key2[64]; + } u; + u8 opad[64]; +}; + +/** + * struct flexi_crypto_context - Crypto context + * @cipher_type: Encryption cipher type + * @aes_keylen: AES key length + * @iv_source: Encryption IV source + * @hash_type: Authentication type + * @auth_input_type: Authentication input type + * 1 - Authentication IV and KEY, microcode calculates OPAD/IPAD + * 0 - Authentication OPAD/IPAD + * @mac_len: mac length + * @crypto: Crypto keys + * @auth: Authentication keys + */ +struct flexi_crypto_context { + union { + __be64 flags; + struct { +#if defined(__BIG_ENDIAN_BITFIELD) + u64 cipher_type : 4; + u64 reserved_59 : 1; + u64 aes_keylen : 2; + u64 iv_source : 1; + u64 hash_type : 4; + u64 reserved_49_51 : 3; + u64 auth_input_type: 1; + u64 mac_len : 8; + u64 reserved_0_39 : 40; +#else + u64 reserved_0_39 : 40; + u64 mac_len : 8; + u64 auth_input_type: 1; + u64 reserved_49_51 : 3; + u64 hash_type : 4; + u64 iv_source : 1; + u64 aes_keylen : 2; + u64 reserved_59 : 1; + u64 cipher_type : 4; +#endif + } w0; + }; + + struct crypto_keys crypto; + struct auth_keys auth; +}; + +struct crypto_ctx_hdr { + struct dma_pool *pool; + dma_addr_t dma; + void *vaddr; +}; + +struct nitrox_crypto_ctx { + struct nitrox_device *ndev; + union { + u64 ctx_handle; + struct flexi_crypto_context *fctx; + } u; + struct crypto_ctx_hdr *chdr; +}; + +struct nitrox_kcrypt_request { + struct se_crypto_request creq; + struct nitrox_crypto_ctx *nctx; + struct skcipher_request *skreq; +}; + +/** + * struct pkt_instr_hdr - Packet Instruction Header + * @g: Gather used + * When [G] is set and [GSZ] != 0, the instruction is + * indirect gather instruction. + * When [G] is set and [GSZ] = 0, the instruction is + * direct gather instruction. + * @gsz: Number of pointers in the indirect gather list + * @ihi: When set hardware duplicates the 1st 8 bytes of pkt_instr_hdr + * and adds them to the packet after the pkt_instr_hdr but before any UDD + * @ssz: Not used by the input hardware. But can become slc_store_int[SSZ] + * when [IHI] is set. + * @fsz: The number of front data bytes directly included in the + * PCIe instruction. + * @tlen: The length of the input packet in bytes, include: + * - 16B pkt_hdr + * - Inline context bytes if any, + * - UDD if any, + * - packet payload bytes + */ +union pkt_instr_hdr { + u64 value; + struct { +#if defined(__BIG_ENDIAN_BITFIELD) + u64 raz_48_63 : 16; + u64 g : 1; + u64 gsz : 7; + u64 ihi : 1; + u64 ssz : 7; + u64 raz_30_31 : 2; + u64 fsz : 6; + u64 raz_16_23 : 8; + u64 tlen : 16; +#else + u64 tlen : 16; + u64 raz_16_23 : 8; + u64 fsz : 6; + u64 raz_30_31 : 2; + u64 ssz : 7; + u64 ihi : 1; + u64 gsz : 7; + u64 g : 1; + u64 raz_48_63 : 16; +#endif + } s; +}; + +/** + * struct pkt_hdr - Packet Input Header + * @opcode: Request opcode (Major) + * @arg: Request opcode (Minor) + * @ctxc: Context control. + * @unca: When set [UNC] is the uncertainty count for an input packet. + * The hardware uses uncertainty counts to predict + * output buffer use and avoid deadlock. + * @info: Not used by input hardware. Available for use + * during SE processing. + * @destport: The expected destination port/ring/channel for the packet. + * @unc: Uncertainty count for an input packet. + * @grp: SE group that will process the input packet. + * @ctxl: Context Length in 64-bit words. + * @uddl: User-defined data (UDD) length in bytes. + * @ctxp: Context pointer. CTXP<63,2:0> must be zero in all cases. + */ +union pkt_hdr { + u64 value[2]; + struct { +#if defined(__BIG_ENDIAN_BITFIELD) + u64 opcode : 8; + u64 arg : 8; + u64 ctxc : 2; + u64 unca : 1; + u64 raz_44 : 1; + u64 info : 3; + u64 destport : 9; + u64 unc : 8; + u64 raz_19_23 : 5; + u64 grp : 3; + u64 raz_15 : 1; + u64 ctxl : 7; + u64 uddl : 8; +#else + u64 uddl : 8; + u64 ctxl : 7; + u64 raz_15 : 1; + u64 grp : 3; + u64 raz_19_23 : 5; + u64 unc : 8; + u64 destport : 9; + u64 info : 3; + u64 raz_44 : 1; + u64 unca : 1; + u64 ctxc : 2; + u64 arg : 8; + u64 opcode : 8; +#endif + __be64 ctxp; + } s; +}; + +/** + * struct slc_store_info - Solicited Paceket Output Store Information. + * @ssz: The number of scatterlist pointers for the solicited output port + * packet. + * @rptr: The result pointer for the solicited output port packet. + * If [SSZ]=0, [RPTR] must point directly to a buffer on the remote + * host that is large enough to hold the entire output packet. + * If [SSZ]!=0, [RPTR] must point to an array of ([SSZ]+3)/4 + * sglist components at [RPTR] on the remote host. + */ +union slc_store_info { + u64 value[2]; + struct { +#if defined(__BIG_ENDIAN_BITFIELD) + u64 raz_39_63 : 25; + u64 ssz : 7; + u64 raz_0_31 : 32; +#else + u64 raz_0_31 : 32; + u64 ssz : 7; + u64 raz_39_63 : 25; +#endif + __be64 rptr; + } s; +}; + +/** + * struct nps_pkt_instr - NPS Packet Instruction of SE cores. + * @dptr0 : Input pointer points to buffer in remote host. + * @ih: Packet Instruction Header (8 bytes) + * @irh: Packet Input Header (16 bytes) + * @slc: Solicited Packet Output Store Information (16 bytes) + * @fdata: Front data + * + * 64-Byte Instruction Format + */ +struct nps_pkt_instr { + __be64 dptr0; + union pkt_instr_hdr ih; + union pkt_hdr irh; + union slc_store_info slc; + u64 fdata[2]; +}; + +/** + * struct ctx_hdr - Book keeping data about the crypto context + * @pool: Pool used to allocate crypto context + * @dma: Base DMA address of the cypto context + * @ctx_dma: Actual usable crypto context for NITROX + */ +struct ctx_hdr { + struct dma_pool *pool; + dma_addr_t dma; + dma_addr_t ctx_dma; +}; + +/* + * struct sglist_component - SG list component format + * @len0: The number of bytes at [PTR0] on the remote host. + * @len1: The number of bytes at [PTR1] on the remote host. + * @len2: The number of bytes at [PTR2] on the remote host. + * @len3: The number of bytes at [PTR3] on the remote host. + * @dma0: First pointer point to buffer in remote host. + * @dma1: Second pointer point to buffer in remote host. + * @dma2: Third pointer point to buffer in remote host. + * @dma3: Fourth pointer point to buffer in remote host. + */ +struct nitrox_sgcomp { + __be16 len[4]; + __be64 dma[4]; +}; + +/* + * strutct nitrox_sgtable - SG list information + * @map_cnt: Number of buffers mapped + * @nr_comp: Number of sglist components + * @total_bytes: Total bytes in sglist. + * @len: Total sglist components length. + * @dma: DMA address of sglist component. + * @dir: DMA direction. + * @buf: crypto request buffer. + * @sglist: SG list of input/output buffers. + * @sgcomp: sglist component for NITROX. + */ +struct nitrox_sgtable { + u8 map_bufs_cnt; + u8 nr_sgcomp; + u16 total_bytes; + u32 len; + dma_addr_t dma; + enum dma_data_direction dir; + + struct scatterlist *buf; + struct nitrox_sglist *sglist; + struct nitrox_sgcomp *sgcomp; +}; + +/* Response Header Length */ +#define ORH_HLEN 8 +/* Completion bytes Length */ +#define COMP_HLEN 8 + +struct resp_hdr { + u64 orh; + dma_addr_t orh_dma; + u64 completion; + dma_addr_t completion_dma; +}; + +typedef void (*completion_t)(struct skcipher_request *skreq, int err); + +/** + * struct nitrox_softreq - Represents the NIROX Request. + * @response: response list entry + * @backlog: Backlog list entry + * @ndev: Device used to submit the request + * @cmdq: Command queue for submission + * @resp: Response headers + * @instr: 64B instruction + * @in: SG table for input + * @out SG table for output + * @tstamp: Request submitted time in jiffies + * @callback: callback after request completion/timeout + * @cb_arg: callback argument + */ +struct nitrox_softreq { + struct list_head response; + struct list_head backlog; + + u32 flags; + gfp_t gfp; + atomic_t status; + bool inplace; + + struct nitrox_device *ndev; + struct nitrox_cmdq *cmdq; + + struct nps_pkt_instr instr; + struct resp_hdr resp; + struct nitrox_sgtable in; + struct nitrox_sgtable out; + + unsigned long tstamp; + + completion_t callback; + struct skcipher_request *skreq; +}; + +#endif /* __NITROX_REQ_H */ |