diff options
Diffstat (limited to 'drivers/hwtracing/coresight/Kconfig')
| -rw-r--r-- | drivers/hwtracing/coresight/Kconfig | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig new file mode 100644 index 000000000..ad34380ca --- /dev/null +++ b/drivers/hwtracing/coresight/Kconfig @@ -0,0 +1,117 @@ +# +# Coresight configuration +# +menuconfig CORESIGHT + bool "CoreSight Tracing Support" + select ARM_AMBA + select PERF_EVENTS + help + This framework provides a kernel interface for the CoreSight debug + and trace drivers to register themselves with. It's intended to build + a topological view of the CoreSight components based on a DT + specification and configure the right series of components when a + trace source gets enabled. + +if CORESIGHT +config CORESIGHT_LINKS_AND_SINKS + bool "CoreSight Link and Sink drivers" + help + This enables support for CoreSight link and sink drivers that are + responsible for transporting and collecting the trace data + respectively. Link and sinks are dynamically aggregated with a trace + entity at run time to form a complete trace path. + +config CORESIGHT_LINK_AND_SINK_TMC + bool "Coresight generic TMC driver" + depends on CORESIGHT_LINKS_AND_SINKS + help + This enables support for the Trace Memory Controller driver. + Depending on its configuration the device can act as a link (embedded + trace router - ETR) or sink (embedded trace FIFO). The driver + complies with the generic implementation of the component without + special enhancement or added features. + +config CORESIGHT_CATU + bool "Coresight Address Translation Unit (CATU) driver" + depends on CORESIGHT_LINK_AND_SINK_TMC + help + Enable support for the Coresight Address Translation Unit (CATU). + CATU supports a scatter gather table of 4K pages, with forward/backward + lookup. CATU helps TMC ETR to use a large physically non-contiguous trace + buffer by translating the addresses used by ETR to the physical address + by looking up the provided table. CATU can also be used in pass-through + mode where the address is not translated. + +config CORESIGHT_SINK_TPIU + bool "Coresight generic TPIU driver" + depends on CORESIGHT_LINKS_AND_SINKS + help + This enables support for the Trace Port Interface Unit driver, + responsible for bridging the gap between the on-chip coresight + components and a trace for bridging the gap between the on-chip + coresight components and a trace port collection engine, typically + connected to an external host for use case capturing more traces than + the on-board coresight memory can handle. + +config CORESIGHT_SINK_ETBV10 + bool "Coresight ETBv1.0 driver" + depends on CORESIGHT_LINKS_AND_SINKS + help + This enables support for the Embedded Trace Buffer version 1.0 driver + that complies with the generic implementation of the component without + special enhancement or added features. + +config CORESIGHT_SOURCE_ETM3X + bool "CoreSight Embedded Trace Macrocell 3.x driver" + depends on !ARM64 + select CORESIGHT_LINKS_AND_SINKS + help + This driver provides support for processor ETM3.x and PTM1.x modules, + which allows tracing the instructions that a processor is executing + This is primarily useful for instruction level tracing. Depending + the ETM version data tracing may also be available. + +config CORESIGHT_SOURCE_ETM4X + bool "CoreSight Embedded Trace Macrocell 4.x driver" + depends on ARM64 + select CORESIGHT_LINKS_AND_SINKS + help + This driver provides support for the ETM4.x tracer module, tracing the + instructions that a processor is executing. This is primarily useful + for instruction level tracing. Depending on the implemented version + data tracing may also be available. + +config CORESIGHT_DYNAMIC_REPLICATOR + bool "CoreSight Programmable Replicator driver" + depends on CORESIGHT_LINKS_AND_SINKS + help + This enables support for dynamic CoreSight replicator link driver. + The programmable ATB replicator allows independent filtering of the + trace data based on the traceid. + +config CORESIGHT_STM + bool "CoreSight System Trace Macrocell driver" + depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64 + select CORESIGHT_LINKS_AND_SINKS + select STM + help + This driver provides support for hardware assisted software + instrumentation based tracing. This is primarily used for + logging useful software events or data coming from various entities + in the system, possibly running different OSs + +config CORESIGHT_CPU_DEBUG + tristate "CoreSight CPU Debug driver" + depends on ARM || ARM64 + depends on DEBUG_FS + help + This driver provides support for coresight debugging module. This + is primarily used to dump sample-based profiling registers when + system triggers panic, the driver will parse context registers so + can quickly get to know program counter (PC), secure state, + exception level, etc. Before use debugging functionality, platform + needs to ensure the clock domain and power domain are enabled + properly, please refer Documentation/trace/coresight-cpu-debug.txt + for detailed description and the example for usage. + +endif |