diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/iio/accel/Kconfig | 411 |
1 files changed, 411 insertions, 0 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig new file mode 100644 index 000000000..829dc96c9 --- /dev/null +++ b/drivers/iio/accel/Kconfig @@ -0,0 +1,411 @@ +# +# Accelerometer drivers +# +# When adding new entries keep the list in alphabetical order + +menu "Accelerometers" + +config ADIS16201 + tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say Y here to build support for Analog Devices adis16201 dual-axis + digital inclinometer and accelerometer. + + To compile this driver as a module, say M here: the module will + be called adis16201. + +config ADIS16209 + tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say Y here to build support for Analog Devices adis16209 dual-axis digital inclinometer + and accelerometer. + + To compile this driver as a module, say M here: the module will be + called adis16209. + +config ADXL345 + tristate + +config ADXL345_I2C + tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver" + depends on INPUT_ADXL34X=n + depends on I2C + select ADXL345 + select REGMAP_I2C + help + Say Y here if you want to build support for the Analog Devices + ADXL345 or ADXL375 3-axis digital accelerometer. + + To compile this driver as a module, choose M here: the module + will be called adxl345_i2c and you will also get adxl345_core + for the core module. + +config ADXL345_SPI + tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver" + depends on INPUT_ADXL34X=n + depends on SPI + select ADXL345 + select REGMAP_SPI + help + Say Y here if you want to build support for the Analog Devices + ADXL345 or ADXL375 3-axis digital accelerometer. + + To compile this driver as a module, choose M here: the module + will be called adxl345_spi and you will also get adxl345_core + for the core module. + +config BMA180 + tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Bosch BMA180 or + BMA250 triaxial acceleration sensor. + + To compile this driver as a module, choose M here: the + module will be called bma180. + +config BMA220 + tristate "Bosch BMA220 3-Axis Accelerometer Driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to add support for the Bosch BMA220 triaxial + acceleration sensor. + + To compile this driver as a module, choose M here: the + module will be called bma220_spi. + +config BMC150_ACCEL + tristate "Bosch BMC150 Accelerometer Driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP + select BMC150_ACCEL_I2C if I2C + select BMC150_ACCEL_SPI if SPI + help + Say yes here to build support for the following Bosch accelerometers: + BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing accelerometer part, which has + its own address and register map. + +config BMC150_ACCEL_I2C + tristate + select REGMAP_I2C + +config BMC150_ACCEL_SPI + tristate + select REGMAP_SPI + +config DA280 + tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver" + depends on I2C + help + Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit + digital accelerometer. + + To compile this driver as a module, choose M here: the + module will be called da280. + +config DA311 + tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver" + depends on I2C + help + Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit + digital accelerometer. + + To compile this driver as a module, choose M here: the + module will be called da311. + +config DMARD06 + tristate "Domintech DMARD06 Digital Accelerometer Driver" + depends on OF || COMPILE_TEST + depends on I2C + help + Say yes here to build support for the Domintech low-g tri-axial + digital accelerometers: DMARD05, DMARD06, DMARD07. + + To compile this driver as a module, choose M here: the + module will be called dmard06. + +config DMARD09 + tristate "Domintech DMARD09 3-axis Accelerometer Driver" + depends on I2C + help + Say yes here to get support for the Domintech DMARD09 3-axis + accelerometer. + + Choosing M will build the driver as a module. If so, the module + will be called dmard09. + +config DMARD10 + tristate "Domintech DMARD10 3-axis Accelerometer Driver" + depends on I2C + help + Say yes here to get support for the Domintech DMARD10 3-axis + accelerometer. + + Choosing M will build the driver as a module. If so, the module + will be called dmard10. + +config HID_SENSOR_ACCEL_3D + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Accelerometers 3D" + help + Say yes here to build support for the HID SENSOR + accelerometers 3D. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-accel-3d. + +config IIO_CROS_EC_ACCEL_LEGACY + tristate "ChromeOS EC Legacy Accelerometer Sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select CROS_EC_LPC_REGISTER_DEVICE + help + Say yes here to get support for accelerometers on Chromebook using + legacy EC firmware. + Sensor data is retrieved through IO memory. + Newer devices should use IIO_CROS_EC_SENSORS. + +config IIO_ST_ACCEL_3AXIS + tristate "STMicroelectronics accelerometers 3-Axis Driver" + depends on (I2C || SPI_MASTER) && SYSFS + depends on !SENSORS_LIS3_I2C + depends on !SENSORS_LIS3_SPI + select IIO_ST_SENSORS_CORE + select IIO_ST_ACCEL_I2C_3AXIS if (I2C) + select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + help + Say yes here to build support for STMicroelectronics accelerometers: + LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, + LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL, + LNG2DM + + This driver can also be built as a module. If so, these modules + will be created: + - st_accel (core functions for the driver [it is mandatory]); + - st_accel_i2c (necessary for the I2C devices [optional*]); + - st_accel_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_ACCEL_I2C_3AXIS + tristate + depends on IIO_ST_ACCEL_3AXIS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_ACCEL_SPI_3AXIS + tristate + depends on IIO_ST_ACCEL_3AXIS + depends on IIO_ST_SENSORS_SPI + +config KXSD9 + tristate "Kionix KXSD9 Accelerometer Driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Kionix KXSD9 accelerometer. + It can be accessed using an (optional) SPI or I2C interface. + + To compile this driver as a module, choose M here: the module + will be called kxsd9. + +config KXSD9_SPI + tristate "Kionix KXSD9 SPI transport" + depends on KXSD9 + depends on SPI + default KXSD9 + select REGMAP_SPI + help + Say yes here to enable the Kionix KXSD9 accelerometer + SPI transport channel. + +config KXSD9_I2C + tristate "Kionix KXSD9 I2C transport" + depends on KXSD9 + depends on I2C + default KXSD9 + select REGMAP_I2C + help + Say yes here to enable the Kionix KXSD9 accelerometer + I2C transport channel. + +config KXCJK1013 + tristate "Kionix 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Kionix KXCJK-1013 + triaxial acceleration sensor. This driver also supports KXCJ9-1008, + KXTJ2-1009 and KXTF9. + + To compile this driver as a module, choose M here: the module will + be called kxcjk-1013. + +config MC3230 + tristate "mCube MC3230 Digital Accelerometer Driver" + depends on I2C + help + Say yes here to build support for the mCube MC3230 low-g tri-axial + digital accelerometer. + + To compile this driver as a module, choose M here: the + module will be called mc3230. + +config MMA7455 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config MMA7455_I2C + tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver" + depends on I2C + select MMA7455 + select REGMAP_I2C + help + Say yes here to build support for the Freescale MMA7455L and + MMA7456L 3-axis accelerometer. + + To compile this driver as a module, choose M here: the module + will be called mma7455_i2c. + +config MMA7455_SPI + tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver" + depends on SPI_MASTER + select MMA7455 + select REGMAP_SPI + help + Say yes here to build support for the Freescale MMA7455L and + MMA7456L 3-axis accelerometer. + + To compile this driver as a module, choose M here: the module + will be called mma7455_spi. + +config MMA7660 + tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver" + depends on I2C + help + Say yes here to get support for the Freescale MMA7660FC 3-Axis + accelerometer. + + Choosing M will build the driver as a module. If so, the module + will be called mma7660. + +config MMA8452 + tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the following Freescale / NXP 3-axis + accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, + FXLS8471Q. + + To compile this driver as a module, choose M here: the module + will be called mma8452. + +config MMA9551_CORE + tristate + +config MMA9551 + tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" + depends on I2C + select MMA9551_CORE + + help + Say yes here to build support for the Freescale MMA9551L + Intelligent Motion-Sensing Platform Driver. + + To compile this driver as a module, choose M here: the module + will be called mma9551. + +config MMA9553 + tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" + depends on I2C + select MMA9551_CORE + help + Say yes here to build support for the Freescale MMA9553L + Intelligent Pedometer Platform Driver. + + To compile this driver as a module, choose M here: the module + will be called mma9553. + +config MXC4005 + tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + help + Say yes here to build support for the Memsic MXC4005XC 3-axis + accelerometer. + + To compile this driver as a module, choose M. The module will be + called mxc4005. + +config MXC6255 + tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for the Memsic MXC6255 Orientation + Sensing Accelerometer Driver. + + To compile this driver as a module, choose M here: the module will be + called mxc6255. + +config SCA3000 + select IIO_BUFFER + select IIO_KFIFO_BUF + depends on SPI + tristate "VTI SCA3000 series accelerometers" + help + Say Y here to build support for the VTI SCA3000 series of SPI + accelerometers. These devices use a hardware ring buffer. + + To compile this driver as a module, say M here: the module will be + called sca3000. + +config STK8312 + tristate "Sensortek STK8312 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to get support for the Sensortek STK8312 3-axis + accelerometer. + + Choosing M will build the driver as a module. If so, the module + will be called stk8312. + +config STK8BA50 + tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to get support for the Sensortek STK8BA50 3-axis + accelerometer. + + Choosing M will build the driver as a module. If so, the module + will be called stk8ba50. + +endmenu |