diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/iio/adc/ti-adc084s021.c | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/drivers/iio/adc/ti-adc084s021.c b/drivers/iio/adc/ti-adc084s021.c new file mode 100644 index 000000000..ec490e7a5 --- /dev/null +++ b/drivers/iio/adc/ti-adc084s021.c @@ -0,0 +1,278 @@ +/** + * Copyright (C) 2017 Axis Communications AB + * + * Driver for Texas Instruments' ADC084S021 ADC chip. + * Datasheets can be found here: + * http://www.ti.com/lit/ds/symlink/adc084s021.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/spi/spi.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/regulator/consumer.h> + +#define ADC084S021_DRIVER_NAME "adc084s021" + +struct adc084s021 { + struct spi_device *spi; + struct spi_message message; + struct spi_transfer spi_trans; + struct regulator *reg; + struct mutex lock; + /* Buffer used to align data */ + struct { + __be16 channels[4]; + s64 ts __aligned(8); + } scan; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache line. + */ + u16 tx_buf[4] ____cacheline_aligned; + __be16 rx_buf[5]; /* First 16-bits are trash */ +}; + +#define ADC084S021_VOLTAGE_CHANNEL(num) \ + { \ + .type = IIO_VOLTAGE, \ + .channel = (num), \ + .indexed = 1, \ + .scan_index = (num), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 8, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_BE, \ + }, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ + } + +static const struct iio_chan_spec adc084s021_channels[] = { + ADC084S021_VOLTAGE_CHANNEL(0), + ADC084S021_VOLTAGE_CHANNEL(1), + ADC084S021_VOLTAGE_CHANNEL(2), + ADC084S021_VOLTAGE_CHANNEL(3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +/** + * Read an ADC channel and return its value. + * + * @adc: The ADC SPI data. + * @data: Buffer for converted data. + */ +static int adc084s021_adc_conversion(struct adc084s021 *adc, void *data) +{ + int n_words = (adc->spi_trans.len >> 1) - 1; /* Discard first word */ + int ret, i = 0; + u16 *p = data; + + /* Do the transfer */ + ret = spi_sync(adc->spi, &adc->message); + if (ret < 0) + return ret; + + for (; i < n_words; i++) + *(p + i) = adc->rx_buf[i + 1]; + + return ret; +} + +static int adc084s021_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + struct adc084s021 *adc = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret < 0) + return ret; + + ret = regulator_enable(adc->reg); + if (ret) { + iio_device_release_direct_mode(indio_dev); + return ret; + } + + adc->tx_buf[0] = channel->channel << 3; + ret = adc084s021_adc_conversion(adc, val); + iio_device_release_direct_mode(indio_dev); + regulator_disable(adc->reg); + if (ret < 0) + return ret; + + *val = be16_to_cpu(*val); + *val = (*val >> channel->scan_type.shift) & 0xff; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + ret = regulator_enable(adc->reg); + if (ret) + return ret; + + ret = regulator_get_voltage(adc->reg); + regulator_disable(adc->reg); + if (ret < 0) + return ret; + + *val = ret / 1000; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +/** + * Read enabled ADC channels and push data to the buffer. + * + * @irq: The interrupt number (not used). + * @pollfunc: Pointer to the poll func. + */ +static irqreturn_t adc084s021_buffer_trigger_handler(int irq, void *pollfunc) +{ + struct iio_poll_func *pf = pollfunc; + struct iio_dev *indio_dev = pf->indio_dev; + struct adc084s021 *adc = iio_priv(indio_dev); + + mutex_lock(&adc->lock); + + if (adc084s021_adc_conversion(adc, adc->scan.channels) < 0) + dev_err(&adc->spi->dev, "Failed to read data\n"); + + iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan, + iio_get_time_ns(indio_dev)); + mutex_unlock(&adc->lock); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int adc084s021_buffer_preenable(struct iio_dev *indio_dev) +{ + struct adc084s021 *adc = iio_priv(indio_dev); + int scan_index; + int i = 0; + + for_each_set_bit(scan_index, indio_dev->active_scan_mask, + indio_dev->masklength) { + const struct iio_chan_spec *channel = + &indio_dev->channels[scan_index]; + adc->tx_buf[i++] = channel->channel << 3; + } + adc->spi_trans.len = 2 + (i * sizeof(__be16)); /* Trash + channels */ + + return regulator_enable(adc->reg); +} + +static int adc084s021_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct adc084s021 *adc = iio_priv(indio_dev); + + adc->spi_trans.len = 4; /* Trash + single channel */ + + return regulator_disable(adc->reg); +} + +static const struct iio_info adc084s021_info = { + .read_raw = adc084s021_read_raw, +}; + +static const struct iio_buffer_setup_ops adc084s021_buffer_setup_ops = { + .preenable = adc084s021_buffer_preenable, + .postenable = iio_triggered_buffer_postenable, + .predisable = iio_triggered_buffer_predisable, + .postdisable = adc084s021_buffer_postdisable, +}; + +static int adc084s021_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adc084s021 *adc; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + if (!indio_dev) { + dev_err(&spi->dev, "Failed to allocate IIO device\n"); + return -ENOMEM; + } + + adc = iio_priv(indio_dev); + adc->spi = spi; + + /* Connect the SPI device and the iio dev */ + spi_set_drvdata(spi, indio_dev); + + /* Initiate the Industrial I/O device */ + indio_dev->dev.parent = &spi->dev; + indio_dev->dev.of_node = spi->dev.of_node; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &adc084s021_info; + indio_dev->channels = adc084s021_channels; + indio_dev->num_channels = ARRAY_SIZE(adc084s021_channels); + + /* Create SPI transfer for channel reads */ + adc->spi_trans.tx_buf = adc->tx_buf; + adc->spi_trans.rx_buf = adc->rx_buf; + adc->spi_trans.len = 4; /* Trash + single channel */ + spi_message_init_with_transfers(&adc->message, &adc->spi_trans, 1); + + adc->reg = devm_regulator_get(&spi->dev, "vref"); + if (IS_ERR(adc->reg)) + return PTR_ERR(adc->reg); + + mutex_init(&adc->lock); + + /* Setup triggered buffer with pollfunction */ + ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL, + adc084s021_buffer_trigger_handler, + &adc084s021_buffer_setup_ops); + if (ret) { + dev_err(&spi->dev, "Failed to setup triggered buffer\n"); + return ret; + } + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct of_device_id adc084s021_of_match[] = { + { .compatible = "ti,adc084s021", }, + {}, +}; +MODULE_DEVICE_TABLE(of, adc084s021_of_match); + +static const struct spi_device_id adc084s021_id[] = { + { ADC084S021_DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, adc084s021_id); + +static struct spi_driver adc084s021_driver = { + .driver = { + .name = ADC084S021_DRIVER_NAME, + .of_match_table = of_match_ptr(adc084s021_of_match), + }, + .probe = adc084s021_probe, + .id_table = adc084s021_id, +}; +module_spi_driver(adc084s021_driver); + +MODULE_AUTHOR("Mårten Lindahl <martenli@axis.com>"); +MODULE_DESCRIPTION("Texas Instruments ADC084S021"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("1.0"); |