summaryrefslogtreecommitdiffstats
path: root/drivers/iio/pressure/zpa2326_spi.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/iio/pressure/zpa2326_spi.c103
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/iio/pressure/zpa2326_spi.c b/drivers/iio/pressure/zpa2326_spi.c
new file mode 100644
index 000000000..bd2c1c319
--- /dev/null
+++ b/drivers/iio/pressure/zpa2326_spi.c
@@ -0,0 +1,103 @@
+/*
+ * Murata ZPA2326 SPI pressure and temperature sensor driver
+ *
+ * Copyright (c) 2016 Parrot S.A.
+ *
+ * Author: Gregor Boirie <gregor.boirie@parrot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include <linux/of_device.h>
+#include "zpa2326.h"
+
+/*
+ * read_flag_mask:
+ * - address bit 7 must be set to request a register read operation
+ * - address bit 6 must be set to request register address auto increment
+ */
+static const struct regmap_config zpa2326_regmap_spi_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .writeable_reg = zpa2326_isreg_writeable,
+ .readable_reg = zpa2326_isreg_readable,
+ .precious_reg = zpa2326_isreg_precious,
+ .max_register = ZPA2326_TEMP_OUT_H_REG,
+ .read_flag_mask = BIT(7) | BIT(6),
+ .cache_type = REGCACHE_NONE,
+};
+
+static int zpa2326_probe_spi(struct spi_device *spi)
+{
+ struct regmap *regmap;
+ int err;
+
+ regmap = devm_regmap_init_spi(spi, &zpa2326_regmap_spi_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "failed to init registers map");
+ return PTR_ERR(regmap);
+ }
+
+ /*
+ * Enforce SPI slave settings to prevent from DT misconfiguration.
+ *
+ * Clock is idle high. Sampling happens on trailing edge, i.e., rising
+ * edge. Maximum bus frequency is 1 MHz. Registers are 8 bits wide.
+ */
+ spi->mode = SPI_MODE_3;
+ spi->max_speed_hz = min(spi->max_speed_hz, 1000000U);
+ spi->bits_per_word = 8;
+ err = spi_setup(spi);
+ if (err < 0)
+ return err;
+
+ return zpa2326_probe(&spi->dev, spi_get_device_id(spi)->name,
+ spi->irq, ZPA2326_DEVICE_ID, regmap);
+}
+
+static int zpa2326_remove_spi(struct spi_device *spi)
+{
+ zpa2326_remove(&spi->dev);
+
+ return 0;
+}
+
+static const struct spi_device_id zpa2326_spi_ids[] = {
+ { "zpa2326", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, zpa2326_spi_ids);
+
+#if defined(CONFIG_OF)
+static const struct of_device_id zpa2326_spi_matches[] = {
+ { .compatible = "murata,zpa2326" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, zpa2326_spi_matches);
+#endif
+
+static struct spi_driver zpa2326_spi_driver = {
+ .driver = {
+ .name = "zpa2326-spi",
+ .of_match_table = of_match_ptr(zpa2326_spi_matches),
+ .pm = ZPA2326_PM_OPS,
+ },
+ .probe = zpa2326_probe_spi,
+ .remove = zpa2326_remove_spi,
+ .id_table = zpa2326_spi_ids,
+};
+module_spi_driver(zpa2326_spi_driver);
+
+MODULE_AUTHOR("Gregor Boirie <gregor.boirie@parrot.com>");
+MODULE_DESCRIPTION("SPI driver for Murata ZPA2326 pressure sensor");
+MODULE_LICENSE("GPL v2");