diff options
Diffstat (limited to '')
32 files changed, 8714 insertions, 0 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig new file mode 100644 index 000000000..eaa7cfcb4 --- /dev/null +++ b/drivers/iio/pressure/Kconfig @@ -0,0 +1,230 @@ +# +# Pressure drivers +# +# When adding new entries keep the list in alphabetical order + +menu "Pressure sensors" + +config ABP060MG + tristate "Honeywell ABP pressure sensor driver" + depends on I2C + help + Say yes here to build support for the Honeywell ABP pressure + sensors. + + To compile this driver as a module, choose M here: the module + will be called abp060mg. + +config BMP280 + tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" + depends on (I2C || SPI_MASTER) + select REGMAP + select BMP280_I2C if (I2C) + select BMP280_SPI if (SPI_MASTER) + help + Say yes here to build support for Bosch Sensortec BMP180 and BMP280 + pressure and temperature sensors. Also supports the BME280 with + an additional humidity sensor channel. + + To compile this driver as a module, choose M here: the core module + will be called bmp280 and you will also get bmp280-i2c for I2C + and/or bmp280-spi for SPI support. + +config BMP280_I2C + tristate + depends on BMP280 + depends on I2C + select REGMAP_I2C + +config BMP280_SPI + tristate + depends on BMP280 + depends on SPI_MASTER + select REGMAP + +config IIO_CROS_EC_BARO + tristate "ChromeOS EC Barometer Sensor" + depends on IIO_CROS_EC_SENSORS_CORE + help + Say yes here to build support for the Barometer sensor when + presented by the ChromeOS EC Sensor hub. + + To compile this driver as a module, choose M here: the module + will be called cros_ec_baro. + +config HID_SENSOR_PRESS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID PRESS" + help + Say yes here to build support for the HID SENSOR + Pressure driver + + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. + +config HP03 + tristate "Hope RF HP03 temperature and pressure sensor driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Hope RF HP03 pressure and + temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called hp03. + +config MPL115 + tristate + +config MPL115_I2C + tristate "Freescale MPL115A2 pressure sensor driver" + depends on I2C + select MPL115 + help + Say yes here to build support for the Freescale MPL115A2 + pressure sensor connected via I2C. + + To compile this driver as a module, choose M here: the module + will be called mpl115_i2c. + +config MPL115_SPI + tristate "Freescale MPL115A1 pressure sensor driver" + depends on SPI_MASTER + select MPL115 + help + Say yes here to build support for the Freescale MPL115A1 + pressure sensor connected via SPI. + + To compile this driver as a module, choose M here: the module + will be called mpl115_spi. + +config MPL3115 + tristate "Freescale MPL3115A2 pressure sensor driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Freescale MPL3115A2 + pressure sensor / altimeter. + + To compile this driver as a module, choose M here: the module + will be called mpl3115. + +config MS5611 + tristate "Measurement Specialties MS5611 pressure sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Measurement Specialties + MS5611, MS5607 pressure and temperature sensors. + + To compile this driver as a module, choose M here: the module will + be called ms5611_core. + +config MS5611_I2C + tristate "support I2C bus connection" + depends on I2C && MS5611 + help + Say Y here to build I2C bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_i2c. + +config MS5611_SPI + tristate "support SPI bus connection" + depends on SPI_MASTER && MS5611 + help + Say Y here to build SPI bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_spi. + +config MS5637 + tristate "Measurement Specialties MS5637 pressure & temperature sensor" + depends on I2C + select IIO_MS_SENSORS_I2C + help + If you say yes here you get support for the Measurement Specialties + MS5637 pressure and temperature sensor. + This driver is also used for MS8607 temperature, pressure & humidity + sensor + + This driver can also be built as a module. If so, the module will + be called ms5637. + +config IIO_ST_PRESS + tristate "STMicroelectronics pressure sensor Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_ST_PRESS_I2C if (I2C) + select IIO_ST_PRESS_SPI if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + help + Say yes here to build support for STMicroelectronics pressure + sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB. + + This driver can also be built as a module. If so, these modules + will be created: + - st_pressure (core functions for the driver [it is mandatory]); + - st_pressure_i2c (necessary for the I2C devices [optional*]); + - st_pressure_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_PRESS_I2C + tristate + depends on IIO_ST_PRESS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_PRESS_SPI + tristate + depends on IIO_ST_PRESS + depends on IIO_ST_SENSORS_SPI + +config T5403 + tristate "EPCOS T5403 digital barometric pressure sensor driver" + depends on I2C + help + Say yes here to build support for the EPCOS T5403 pressure sensor + connected via I2C. + + To compile this driver as a module, choose M here: the module + will be called t5403. + +config HP206C + tristate "HOPERF HP206C precision barometer and altimeter sensor" + depends on I2C + help + Say yes here to build support for the HOPREF HP206C precision + barometer and altimeter sensor. + + This driver can also be built as a module. If so, the module will + be called hp206c. + +config ZPA2326 + tristate "Murata ZPA2326 pressure sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP + select ZPA2326_I2C if I2C + select ZPA2326_SPI if SPI_MASTER + help + Say Y here to build support for the Murata ZPA2326 pressure and + temperature sensor. + + To compile this driver as a module, choose M here: the module will + be called zpa2326. + +config ZPA2326_I2C + tristate + select REGMAP_I2C + +config ZPA2326_SPI + tristate + select REGMAP_SPI + +endmenu diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile new file mode 100644 index 000000000..c2058d7b2 --- /dev/null +++ b/drivers/iio/pressure/Makefile @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for industrial I/O pressure drivers +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ABP060MG) += abp060mg.o +obj-$(CONFIG_BMP280) += bmp280.o +bmp280-objs := bmp280-core.o bmp280-regmap.o +obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o +obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o +obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o +obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o +obj-$(CONFIG_HP03) += hp03.o +obj-$(CONFIG_MPL115) += mpl115.o +obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o +obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o +obj-$(CONFIG_MPL3115) += mpl3115.o +obj-$(CONFIG_MS5611) += ms5611_core.o +obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o +obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o +obj-$(CONFIG_MS5637) += ms5637.o +obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o +st_pressure-y := st_pressure_core.o +st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o +obj-$(CONFIG_T5403) += t5403.o +obj-$(CONFIG_HP206C) += hp206c.o +obj-$(CONFIG_ZPA2326) += zpa2326.o +obj-$(CONFIG_ZPA2326_I2C) += zpa2326_i2c.o +obj-$(CONFIG_ZPA2326_SPI) += zpa2326_spi.o + +obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o +obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o diff --git a/drivers/iio/pressure/abp060mg.c b/drivers/iio/pressure/abp060mg.c new file mode 100644 index 000000000..46a220c70 --- /dev/null +++ b/drivers/iio/pressure/abp060mg.c @@ -0,0 +1,275 @@ +/* + * Copyright (C) 2016 - Marcin Malagowski <mrc@bourne.st> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iio/iio.h> + +#define ABP060MG_ERROR_MASK 0xC000 +#define ABP060MG_RESP_TIME_MS 40 +#define ABP060MG_MIN_COUNTS 1638 /* = 0x0666 (10% of u14) */ +#define ABP060MG_MAX_COUNTS 14745 /* = 0x3999 (90% of u14) */ +#define ABP060MG_NUM_COUNTS (ABP060MG_MAX_COUNTS - ABP060MG_MIN_COUNTS) + +enum abp_variant { + /* gage [kPa] */ + ABP006KG, ABP010KG, ABP016KG, ABP025KG, ABP040KG, ABP060KG, ABP100KG, + ABP160KG, ABP250KG, ABP400KG, ABP600KG, ABP001GG, + /* differential [kPa] */ + ABP006KD, ABP010KD, ABP016KD, ABP025KD, ABP040KD, ABP060KD, ABP100KD, + ABP160KD, ABP250KD, ABP400KD, + /* gage [psi] */ + ABP001PG, ABP005PG, ABP015PG, ABP030PG, ABP060PG, ABP100PG, ABP150PG, + /* differential [psi] */ + ABP001PD, ABP005PD, ABP015PD, ABP030PD, ABP060PD, +}; + +struct abp_config { + int min; + int max; +}; + +static struct abp_config abp_config[] = { + /* mbar & kPa variants */ + [ABP006KG] = { .min = 0, .max = 6000 }, + [ABP010KG] = { .min = 0, .max = 10000 }, + [ABP016KG] = { .min = 0, .max = 16000 }, + [ABP025KG] = { .min = 0, .max = 25000 }, + [ABP040KG] = { .min = 0, .max = 40000 }, + [ABP060KG] = { .min = 0, .max = 60000 }, + [ABP100KG] = { .min = 0, .max = 100000 }, + [ABP160KG] = { .min = 0, .max = 160000 }, + [ABP250KG] = { .min = 0, .max = 250000 }, + [ABP400KG] = { .min = 0, .max = 400000 }, + [ABP600KG] = { .min = 0, .max = 600000 }, + [ABP001GG] = { .min = 0, .max = 1000000 }, + [ABP006KD] = { .min = -6000, .max = 6000 }, + [ABP010KD] = { .min = -10000, .max = 10000 }, + [ABP016KD] = { .min = -16000, .max = 16000 }, + [ABP025KD] = { .min = -25000, .max = 25000 }, + [ABP040KD] = { .min = -40000, .max = 40000 }, + [ABP060KD] = { .min = -60000, .max = 60000 }, + [ABP100KD] = { .min = -100000, .max = 100000 }, + [ABP160KD] = { .min = -160000, .max = 160000 }, + [ABP250KD] = { .min = -250000, .max = 250000 }, + [ABP400KD] = { .min = -400000, .max = 400000 }, + /* psi variants (1 psi ~ 6895 Pa) */ + [ABP001PG] = { .min = 0, .max = 6985 }, + [ABP005PG] = { .min = 0, .max = 34474 }, + [ABP015PG] = { .min = 0, .max = 103421 }, + [ABP030PG] = { .min = 0, .max = 206843 }, + [ABP060PG] = { .min = 0, .max = 413686 }, + [ABP100PG] = { .min = 0, .max = 689476 }, + [ABP150PG] = { .min = 0, .max = 1034214 }, + [ABP001PD] = { .min = -6895, .max = 6895 }, + [ABP005PD] = { .min = -34474, .max = 34474 }, + [ABP015PD] = { .min = -103421, .max = 103421 }, + [ABP030PD] = { .min = -206843, .max = 206843 }, + [ABP060PD] = { .min = -413686, .max = 413686 }, +}; + +struct abp_state { + struct i2c_client *client; + struct mutex lock; + + /* + * bus-dependent MEASURE_REQUEST length. + * If no SMBUS_QUICK support, need to send dummy byte + */ + int mreq_len; + + /* model-dependent values (calculated on probe) */ + int scale; + int offset; +}; + +static const struct iio_chan_spec abp060mg_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static int abp060mg_get_measurement(struct abp_state *state, int *val) +{ + struct i2c_client *client = state->client; + __be16 buf[2]; + u16 pressure; + int ret; + + buf[0] = 0; + ret = i2c_master_send(client, (u8 *)&buf, state->mreq_len); + if (ret < 0) + return ret; + + msleep_interruptible(ABP060MG_RESP_TIME_MS); + + ret = i2c_master_recv(client, (u8 *)&buf, sizeof(buf)); + if (ret < 0) + return ret; + + pressure = be16_to_cpu(buf[0]); + if (pressure & ABP060MG_ERROR_MASK) + return -EIO; + + if (pressure < ABP060MG_MIN_COUNTS || pressure > ABP060MG_MAX_COUNTS) + return -EIO; + + *val = pressure; + + return IIO_VAL_INT; +} + +static int abp060mg_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct abp_state *state = iio_priv(indio_dev); + int ret; + + mutex_lock(&state->lock); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = abp060mg_get_measurement(state, val); + break; + case IIO_CHAN_INFO_OFFSET: + *val = state->offset; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = state->scale; + *val2 = ABP060MG_NUM_COUNTS * 1000; /* to kPa */ + ret = IIO_VAL_FRACTIONAL; + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&state->lock); + return ret; +} + +static const struct iio_info abp060mg_info = { + .read_raw = abp060mg_read_raw, +}; + +static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id) +{ + struct abp_state *state = iio_priv(indio_dev); + struct abp_config *cfg = &abp_config[id]; + + state->scale = cfg->max - cfg->min; + state->offset = -ABP060MG_MIN_COUNTS; + + if (cfg->min < 0) /* differential */ + state->offset -= ABP060MG_NUM_COUNTS >> 1; +} + +static int abp060mg_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct abp_state *state; + unsigned long cfg_id = id->driver_data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + i2c_set_clientdata(client, state); + state->client = client; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK)) + state->mreq_len = 1; + + abp060mg_init_device(indio_dev, cfg_id); + + indio_dev->dev.parent = &client->dev; + indio_dev->name = dev_name(&client->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &abp060mg_info; + + indio_dev->channels = abp060mg_channels; + indio_dev->num_channels = ARRAY_SIZE(abp060mg_channels); + + mutex_init(&state->lock); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id abp060mg_id_table[] = { + /* mbar & kPa variants (abp060m [60 mbar] == abp006k [6 kPa]) */ + /* gage: */ + { "abp060mg", ABP006KG }, { "abp006kg", ABP006KG }, + { "abp100mg", ABP010KG }, { "abp010kg", ABP010KG }, + { "abp160mg", ABP016KG }, { "abp016kg", ABP016KG }, + { "abp250mg", ABP025KG }, { "abp025kg", ABP025KG }, + { "abp400mg", ABP040KG }, { "abp040kg", ABP040KG }, + { "abp600mg", ABP060KG }, { "abp060kg", ABP060KG }, + { "abp001bg", ABP100KG }, { "abp100kg", ABP100KG }, + { "abp1_6bg", ABP160KG }, { "abp160kg", ABP160KG }, + { "abp2_5bg", ABP250KG }, { "abp250kg", ABP250KG }, + { "abp004bg", ABP400KG }, { "abp400kg", ABP400KG }, + { "abp006bg", ABP600KG }, { "abp600kg", ABP600KG }, + { "abp010bg", ABP001GG }, { "abp001gg", ABP001GG }, + /* differential: */ + { "abp060md", ABP006KD }, { "abp006kd", ABP006KD }, + { "abp100md", ABP010KD }, { "abp010kd", ABP010KD }, + { "abp160md", ABP016KD }, { "abp016kd", ABP016KD }, + { "abp250md", ABP025KD }, { "abp025kd", ABP025KD }, + { "abp400md", ABP040KD }, { "abp040kd", ABP040KD }, + { "abp600md", ABP060KD }, { "abp060kd", ABP060KD }, + { "abp001bd", ABP100KD }, { "abp100kd", ABP100KD }, + { "abp1_6bd", ABP160KD }, { "abp160kd", ABP160KD }, + { "abp2_5bd", ABP250KD }, { "abp250kd", ABP250KD }, + { "abp004bd", ABP400KD }, { "abp400kd", ABP400KD }, + /* psi variants */ + /* gage: */ + { "abp001pg", ABP001PG }, + { "abp005pg", ABP005PG }, + { "abp015pg", ABP015PG }, + { "abp030pg", ABP030PG }, + { "abp060pg", ABP060PG }, + { "abp100pg", ABP100PG }, + { "abp150pg", ABP150PG }, + /* differential: */ + { "abp001pd", ABP001PD }, + { "abp005pd", ABP005PD }, + { "abp015pd", ABP015PD }, + { "abp030pd", ABP030PD }, + { "abp060pd", ABP060PD }, + { /* empty */ }, +}; +MODULE_DEVICE_TABLE(i2c, abp060mg_id_table); + +static struct i2c_driver abp060mg_driver = { + .driver = { + .name = "abp060mg", + }, + .probe = abp060mg_probe, + .id_table = abp060mg_id_table, +}; +module_i2c_driver(abp060mg_driver); + +MODULE_AUTHOR("Marcin Malagowski <mrc@bourne.st>"); +MODULE_DESCRIPTION("Honeywell ABP pressure sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c new file mode 100644 index 000000000..074f6f865 --- /dev/null +++ b/drivers/iio/pressure/bmp280-core.c @@ -0,0 +1,1205 @@ +/* + * Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com> + * Copyright (c) 2012 Bosch Sensortec GmbH + * Copyright (c) 2012 Unixphere AB + * Copyright (c) 2014 Intel Corporation + * Copyright (c) 2016 Linus Walleij <linus.walleij@linaro.org> + * + * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Datasheet: + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf + */ + +#define pr_fmt(fmt) "bmp280: " fmt + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <linux/interrupt.h> +#include <linux/irq.h> /* For irq_get_irq_data() */ +#include <linux/completion.h> +#include <linux/pm_runtime.h> +#include <linux/random.h> + +#include "bmp280.h" + +/* + * These enums are used for indexing into the array of calibration + * coefficients for BMP180. + */ +enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD }; + +struct bmp180_calib { + s16 AC1; + s16 AC2; + s16 AC3; + u16 AC4; + u16 AC5; + u16 AC6; + s16 B1; + s16 B2; + s16 MB; + s16 MC; + s16 MD; +}; + +/* See datasheet Section 4.2.2. */ +struct bmp280_calib { + u16 T1; + s16 T2; + s16 T3; + u16 P1; + s16 P2; + s16 P3; + s16 P4; + s16 P5; + s16 P6; + s16 P7; + s16 P8; + s16 P9; + u8 H1; + s16 H2; + u8 H3; + s16 H4; + s16 H5; + s8 H6; +}; + +struct bmp280_data { + struct device *dev; + struct mutex lock; + struct regmap *regmap; + struct completion done; + bool use_eoc; + const struct bmp280_chip_info *chip_info; + union { + struct bmp180_calib bmp180; + struct bmp280_calib bmp280; + } calib; + struct regulator *vddd; + struct regulator *vdda; + unsigned int start_up_time; /* in microseconds */ + + /* log of base 2 of oversampling rate */ + u8 oversampling_press; + u8 oversampling_temp; + u8 oversampling_humid; + + /* + * Carryover value from temperature conversion, used in pressure + * calculation. + */ + s32 t_fine; +}; + +struct bmp280_chip_info { + const int *oversampling_temp_avail; + int num_oversampling_temp_avail; + + const int *oversampling_press_avail; + int num_oversampling_press_avail; + + const int *oversampling_humid_avail; + int num_oversampling_humid_avail; + + int (*chip_config)(struct bmp280_data *); + int (*read_temp)(struct bmp280_data *, int *); + int (*read_press)(struct bmp280_data *, int *, int *); + int (*read_humid)(struct bmp280_data *, int *, int *); +}; + +/* + * These enums are used for indexing into the array of compensation + * parameters for BMP280. + */ +enum { T1, T2, T3 }; +enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 }; + +static const struct iio_chan_spec bmp280_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, +}; + +static int bmp280_read_calib(struct bmp280_data *data, + struct bmp280_calib *calib, + unsigned int chip) +{ + int ret; + unsigned int tmp; + struct device *dev = data->dev; + __le16 t_buf[BMP280_COMP_TEMP_REG_COUNT / 2]; + __le16 p_buf[BMP280_COMP_PRESS_REG_COUNT / 2]; + + /* Read temperature calibration values. */ + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START, + t_buf, BMP280_COMP_TEMP_REG_COUNT); + if (ret < 0) { + dev_err(data->dev, + "failed to read temperature calibration parameters\n"); + return ret; + } + + calib->T1 = le16_to_cpu(t_buf[T1]); + calib->T2 = le16_to_cpu(t_buf[T2]); + calib->T3 = le16_to_cpu(t_buf[T3]); + + /* Read pressure calibration values. */ + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START, + p_buf, BMP280_COMP_PRESS_REG_COUNT); + if (ret < 0) { + dev_err(data->dev, + "failed to read pressure calibration parameters\n"); + return ret; + } + + calib->P1 = le16_to_cpu(p_buf[P1]); + calib->P2 = le16_to_cpu(p_buf[P2]); + calib->P3 = le16_to_cpu(p_buf[P3]); + calib->P4 = le16_to_cpu(p_buf[P4]); + calib->P5 = le16_to_cpu(p_buf[P5]); + calib->P6 = le16_to_cpu(p_buf[P6]); + calib->P7 = le16_to_cpu(p_buf[P7]); + calib->P8 = le16_to_cpu(p_buf[P8]); + calib->P9 = le16_to_cpu(p_buf[P9]); + + /* + * Read humidity calibration values. + * Due to some odd register addressing we cannot just + * do a big bulk read. Instead, we have to read each Hx + * value separately and sometimes do some bit shifting... + * Humidity data is only available on BME280. + */ + if (chip != BME280_CHIP_ID) + return 0; + + ret = regmap_read(data->regmap, BMP280_REG_COMP_H1, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read H1 comp value\n"); + return ret; + } + calib->H1 = tmp; + + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &tmp, 2); + if (ret < 0) { + dev_err(dev, "failed to read H2 comp value\n"); + return ret; + } + calib->H2 = sign_extend32(le16_to_cpu(tmp), 15); + + ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read H3 comp value\n"); + return ret; + } + calib->H3 = tmp; + + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &tmp, 2); + if (ret < 0) { + dev_err(dev, "failed to read H4 comp value\n"); + return ret; + } + calib->H4 = sign_extend32(((be16_to_cpu(tmp) >> 4) & 0xff0) | + (be16_to_cpu(tmp) & 0xf), 11); + + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &tmp, 2); + if (ret < 0) { + dev_err(dev, "failed to read H5 comp value\n"); + return ret; + } + calib->H5 = sign_extend32(((le16_to_cpu(tmp) >> 4) & 0xfff), 11); + + ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read H6 comp value\n"); + return ret; + } + calib->H6 = sign_extend32(tmp, 7); + + return 0; +} +/* + * Returns humidity in percent, resolution is 0.01 percent. Output value of + * "47445" represents 47445/1024 = 46.333 %RH. + * + * Taken from BME280 datasheet, Section 4.2.3, "Compensation formula". + */ +static u32 bmp280_compensate_humidity(struct bmp280_data *data, + s32 adc_humidity) +{ + s32 var; + struct bmp280_calib *calib = &data->calib.bmp280; + + var = ((s32)data->t_fine) - (s32)76800; + var = ((((adc_humidity << 14) - (calib->H4 << 20) - (calib->H5 * var)) + + (s32)16384) >> 15) * (((((((var * calib->H6) >> 10) + * (((var * (s32)calib->H3) >> 11) + (s32)32768)) >> 10) + + (s32)2097152) * calib->H2 + 8192) >> 14); + var -= ((((var >> 15) * (var >> 15)) >> 7) * (s32)calib->H1) >> 4; + + var = clamp_val(var, 0, 419430400); + + return var >> 12; +}; + +/* + * Returns temperature in DegC, resolution is 0.01 DegC. Output value of + * "5123" equals 51.23 DegC. t_fine carries fine temperature as global + * value. + * + * Taken from datasheet, Section 3.11.3, "Compensation formula". + */ +static s32 bmp280_compensate_temp(struct bmp280_data *data, + s32 adc_temp) +{ + s32 var1, var2; + struct bmp280_calib *calib = &data->calib.bmp280; + + var1 = (((adc_temp >> 3) - ((s32)calib->T1 << 1)) * + ((s32)calib->T2)) >> 11; + var2 = (((((adc_temp >> 4) - ((s32)calib->T1)) * + ((adc_temp >> 4) - ((s32)calib->T1))) >> 12) * + ((s32)calib->T3)) >> 14; + data->t_fine = var1 + var2; + + return (data->t_fine * 5 + 128) >> 8; +} + +/* + * Returns pressure in Pa as unsigned 32 bit integer in Q24.8 format (24 + * integer bits and 8 fractional bits). Output value of "24674867" + * represents 24674867/256 = 96386.2 Pa = 963.862 hPa + * + * Taken from datasheet, Section 3.11.3, "Compensation formula". + */ +static u32 bmp280_compensate_press(struct bmp280_data *data, + s32 adc_press) +{ + s64 var1, var2, p; + struct bmp280_calib *calib = &data->calib.bmp280; + + var1 = ((s64)data->t_fine) - 128000; + var2 = var1 * var1 * (s64)calib->P6; + var2 += (var1 * (s64)calib->P5) << 17; + var2 += ((s64)calib->P4) << 35; + var1 = ((var1 * var1 * (s64)calib->P3) >> 8) + + ((var1 * (s64)calib->P2) << 12); + var1 = ((((s64)1) << 47) + var1) * ((s64)calib->P1) >> 33; + + if (var1 == 0) + return 0; + + p = ((((s64)1048576 - adc_press) << 31) - var2) * 3125; + p = div64_s64(p, var1); + var1 = (((s64)calib->P9) * (p >> 13) * (p >> 13)) >> 25; + var2 = ((s64)(calib->P8) * p) >> 19; + p = ((p + var1 + var2) >> 8) + (((s64)calib->P7) << 4); + + return (u32)p; +} + +static int bmp280_read_temp(struct bmp280_data *data, + int *val) +{ + int ret; + __be32 tmp = 0; + s32 adc_temp, comp_temp; + + ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, + (u8 *) &tmp, 3); + if (ret < 0) { + dev_err(data->dev, "failed to read temperature\n"); + return ret; + } + + adc_temp = be32_to_cpu(tmp) >> 12; + if (adc_temp == BMP280_TEMP_SKIPPED) { + /* reading was skipped */ + dev_err(data->dev, "reading temperature skipped\n"); + return -EIO; + } + comp_temp = bmp280_compensate_temp(data, adc_temp); + + /* + * val might be NULL if we're called by the read_press routine, + * who only cares about the carry over t_fine value. + */ + if (val) { + *val = comp_temp * 10; + return IIO_VAL_INT; + } + + return 0; +} + +static int bmp280_read_press(struct bmp280_data *data, + int *val, int *val2) +{ + int ret; + __be32 tmp = 0; + s32 adc_press; + u32 comp_press; + + /* Read and compensate temperature so we get a reading of t_fine. */ + ret = bmp280_read_temp(data, NULL); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, + (u8 *) &tmp, 3); + if (ret < 0) { + dev_err(data->dev, "failed to read pressure\n"); + return ret; + } + + adc_press = be32_to_cpu(tmp) >> 12; + if (adc_press == BMP280_PRESS_SKIPPED) { + /* reading was skipped */ + dev_err(data->dev, "reading pressure skipped\n"); + return -EIO; + } + comp_press = bmp280_compensate_press(data, adc_press); + + *val = comp_press; + *val2 = 256000; + + return IIO_VAL_FRACTIONAL; +} + +static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) +{ + int ret; + __be16 tmp = 0; + s32 adc_humidity; + u32 comp_humidity; + + /* Read and compensate temperature so we get a reading of t_fine. */ + ret = bmp280_read_temp(data, NULL); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, + (u8 *) &tmp, 2); + if (ret < 0) { + dev_err(data->dev, "failed to read humidity\n"); + return ret; + } + + adc_humidity = be16_to_cpu(tmp); + if (adc_humidity == BMP280_HUMIDITY_SKIPPED) { + /* reading was skipped */ + dev_err(data->dev, "reading humidity skipped\n"); + return -EIO; + } + comp_humidity = bmp280_compensate_humidity(data, adc_humidity); + + *val = comp_humidity * 1000 / 1024; + + return IIO_VAL_INT; +} + +static int bmp280_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct bmp280_data *data = iio_priv(indio_dev); + + pm_runtime_get_sync(data->dev); + mutex_lock(&data->lock); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_HUMIDITYRELATIVE: + ret = data->chip_info->read_humid(data, val, val2); + break; + case IIO_PRESSURE: + ret = data->chip_info->read_press(data, val, val2); + break; + case IIO_TEMP: + ret = data->chip_info->read_temp(data, val); + break; + default: + ret = -EINVAL; + break; + } + break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + switch (chan->type) { + case IIO_HUMIDITYRELATIVE: + *val = 1 << data->oversampling_humid; + ret = IIO_VAL_INT; + break; + case IIO_PRESSURE: + *val = 1 << data->oversampling_press; + ret = IIO_VAL_INT; + break; + case IIO_TEMP: + *val = 1 << data->oversampling_temp; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&data->lock); + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + + return ret; +} + +static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_humid_avail; + const int n = data->chip_info->num_oversampling_humid_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_humid = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + +static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_temp_avail; + const int n = data->chip_info->num_oversampling_temp_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_temp = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + +static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_press_avail; + const int n = data->chip_info->num_oversampling_press_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_press = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + +static int bmp280_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret = 0; + struct bmp280_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + pm_runtime_get_sync(data->dev); + mutex_lock(&data->lock); + switch (chan->type) { + case IIO_HUMIDITYRELATIVE: + ret = bmp280_write_oversampling_ratio_humid(data, val); + break; + case IIO_PRESSURE: + ret = bmp280_write_oversampling_ratio_press(data, val); + break; + case IIO_TEMP: + ret = bmp280_write_oversampling_ratio_temp(data, val); + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + break; + default: + return -EINVAL; + } + + return ret; +} + +static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n) +{ + size_t len = 0; + int i; + + for (i = 0; i < n; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]); + + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev)); + + return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail, + data->chip_info->num_oversampling_temp_avail); +} + +static ssize_t bmp280_show_press_oversampling_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev)); + + return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail, + data->chip_info->num_oversampling_press_avail); +} + +static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available, + S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0); + +static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available, + S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0); + +static struct attribute *bmp280_attributes[] = { + &iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr, + &iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmp280_attrs_group = { + .attrs = bmp280_attributes, +}; + +static const struct iio_info bmp280_info = { + .read_raw = &bmp280_read_raw, + .write_raw = &bmp280_write_raw, + .attrs = &bmp280_attrs_group, +}; + +static int bmp280_chip_config(struct bmp280_data *data) +{ + int ret; + u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) | + BMP280_OSRS_PRESS_X(data->oversampling_press + 1); + + ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, + BMP280_OSRS_TEMP_MASK | + BMP280_OSRS_PRESS_MASK | + BMP280_MODE_MASK, + osrs | BMP280_MODE_NORMAL); + if (ret < 0) { + dev_err(data->dev, + "failed to write ctrl_meas register\n"); + return ret; + } + + ret = regmap_update_bits(data->regmap, BMP280_REG_CONFIG, + BMP280_FILTER_MASK, + BMP280_FILTER_4X); + if (ret < 0) { + dev_err(data->dev, + "failed to write config register\n"); + return ret; + } + + return ret; +} + +static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; + +static const struct bmp280_chip_info bmp280_chip_info = { + .oversampling_temp_avail = bmp280_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .oversampling_press_avail = bmp280_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .chip_config = bmp280_chip_config, + .read_temp = bmp280_read_temp, + .read_press = bmp280_read_press, +}; + +static int bme280_chip_config(struct bmp280_data *data) +{ + int ret; + u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1); + + /* + * Oversampling of humidity must be set before oversampling of + * temperature/pressure is set to become effective. + */ + ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY, + BMP280_OSRS_HUMIDITY_MASK, osrs); + + if (ret < 0) + return ret; + + return bmp280_chip_config(data); +} + +static const struct bmp280_chip_info bme280_chip_info = { + .oversampling_temp_avail = bmp280_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .oversampling_press_avail = bmp280_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .oversampling_humid_avail = bmp280_oversampling_avail, + .num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .chip_config = bme280_chip_config, + .read_temp = bmp280_read_temp, + .read_press = bmp280_read_press, + .read_humid = bmp280_read_humid, +}; + +static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) +{ + int ret; + const int conversion_time_max[] = { 4500, 7500, 13500, 25500 }; + unsigned int delay_us; + unsigned int ctrl; + + if (data->use_eoc) + reinit_completion(&data->done); + + ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas); + if (ret) + return ret; + + if (data->use_eoc) { + /* + * If we have a completion interrupt, use it, wait up to + * 100ms. The longest conversion time listed is 76.5 ms for + * advanced resolution mode. + */ + ret = wait_for_completion_timeout(&data->done, + 1 + msecs_to_jiffies(100)); + if (!ret) + dev_err(data->dev, "timeout waiting for completion\n"); + } else { + if (ctrl_meas == BMP180_MEAS_TEMP) + delay_us = 4500; + else + delay_us = + conversion_time_max[data->oversampling_press]; + + usleep_range(delay_us, delay_us + 1000); + } + + ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl); + if (ret) + return ret; + + /* The value of this bit reset to "0" after conversion is complete */ + if (ctrl & BMP180_MEAS_SCO) + return -EIO; + + return 0; +} + +static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) +{ + int ret; + __be16 tmp = 0; + + ret = bmp180_measure(data, BMP180_MEAS_TEMP); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2); + if (ret) + return ret; + + *val = be16_to_cpu(tmp); + + return 0; +} + +static int bmp180_read_calib(struct bmp280_data *data, + struct bmp180_calib *calib) +{ + int ret; + int i; + __be16 buf[BMP180_REG_CALIB_COUNT / 2]; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf, + sizeof(buf)); + + if (ret < 0) + return ret; + + /* None of the words has the value 0 or 0xFFFF */ + for (i = 0; i < ARRAY_SIZE(buf); i++) { + if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff)) + return -EIO; + } + + /* Toss the calibration data into the entropy pool */ + add_device_randomness(buf, sizeof(buf)); + + calib->AC1 = be16_to_cpu(buf[AC1]); + calib->AC2 = be16_to_cpu(buf[AC2]); + calib->AC3 = be16_to_cpu(buf[AC3]); + calib->AC4 = be16_to_cpu(buf[AC4]); + calib->AC5 = be16_to_cpu(buf[AC5]); + calib->AC6 = be16_to_cpu(buf[AC6]); + calib->B1 = be16_to_cpu(buf[B1]); + calib->B2 = be16_to_cpu(buf[B2]); + calib->MB = be16_to_cpu(buf[MB]); + calib->MC = be16_to_cpu(buf[MC]); + calib->MD = be16_to_cpu(buf[MD]); + + return 0; +} + +/* + * Returns temperature in DegC, resolution is 0.1 DegC. + * t_fine carries fine temperature as global value. + * + * Taken from datasheet, Section 3.5, "Calculating pressure and temperature". + */ +static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp) +{ + s32 x1, x2; + struct bmp180_calib *calib = &data->calib.bmp180; + + x1 = ((adc_temp - calib->AC6) * calib->AC5) >> 15; + x2 = (calib->MC << 11) / (x1 + calib->MD); + data->t_fine = x1 + x2; + + return (data->t_fine + 8) >> 4; +} + +static int bmp180_read_temp(struct bmp280_data *data, int *val) +{ + int ret; + s32 adc_temp, comp_temp; + + ret = bmp180_read_adc_temp(data, &adc_temp); + if (ret) + return ret; + + comp_temp = bmp180_compensate_temp(data, adc_temp); + + /* + * val might be NULL if we're called by the read_press routine, + * who only cares about the carry over t_fine value. + */ + if (val) { + *val = comp_temp * 100; + return IIO_VAL_INT; + } + + return 0; +} + +static int bmp180_read_adc_press(struct bmp280_data *data, int *val) +{ + int ret; + __be32 tmp = 0; + u8 oss = data->oversampling_press; + + ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss)); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3); + if (ret) + return ret; + + *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss); + + return 0; +} + +/* + * Returns pressure in Pa, resolution is 1 Pa. + * + * Taken from datasheet, Section 3.5, "Calculating pressure and temperature". + */ +static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press) +{ + s32 x1, x2, x3, p; + s32 b3, b6; + u32 b4, b7; + s32 oss = data->oversampling_press; + struct bmp180_calib *calib = &data->calib.bmp180; + + b6 = data->t_fine - 4000; + x1 = (calib->B2 * (b6 * b6 >> 12)) >> 11; + x2 = calib->AC2 * b6 >> 11; + x3 = x1 + x2; + b3 = ((((s32)calib->AC1 * 4 + x3) << oss) + 2) / 4; + x1 = calib->AC3 * b6 >> 13; + x2 = (calib->B1 * ((b6 * b6) >> 12)) >> 16; + x3 = (x1 + x2 + 2) >> 2; + b4 = calib->AC4 * (u32)(x3 + 32768) >> 15; + b7 = ((u32)adc_press - b3) * (50000 >> oss); + if (b7 < 0x80000000) + p = (b7 * 2) / b4; + else + p = (b7 / b4) * 2; + + x1 = (p >> 8) * (p >> 8); + x1 = (x1 * 3038) >> 16; + x2 = (-7357 * p) >> 16; + + return p + ((x1 + x2 + 3791) >> 4); +} + +static int bmp180_read_press(struct bmp280_data *data, + int *val, int *val2) +{ + int ret; + s32 adc_press; + u32 comp_press; + + /* Read and compensate temperature so we get a reading of t_fine. */ + ret = bmp180_read_temp(data, NULL); + if (ret) + return ret; + + ret = bmp180_read_adc_press(data, &adc_press); + if (ret) + return ret; + + comp_press = bmp180_compensate_press(data, adc_press); + + *val = comp_press; + *val2 = 1000; + + return IIO_VAL_FRACTIONAL; +} + +static int bmp180_chip_config(struct bmp280_data *data) +{ + return 0; +} + +static const int bmp180_oversampling_temp_avail[] = { 1 }; +static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; + +static const struct bmp280_chip_info bmp180_chip_info = { + .oversampling_temp_avail = bmp180_oversampling_temp_avail, + .num_oversampling_temp_avail = + ARRAY_SIZE(bmp180_oversampling_temp_avail), + + .oversampling_press_avail = bmp180_oversampling_press_avail, + .num_oversampling_press_avail = + ARRAY_SIZE(bmp180_oversampling_press_avail), + + .chip_config = bmp180_chip_config, + .read_temp = bmp180_read_temp, + .read_press = bmp180_read_press, +}; + +static irqreturn_t bmp085_eoc_irq(int irq, void *d) +{ + struct bmp280_data *data = d; + + complete(&data->done); + + return IRQ_HANDLED; +} + +static int bmp085_fetch_eoc_irq(struct device *dev, + const char *name, + int irq, + struct bmp280_data *data) +{ + unsigned long irq_trig; + int ret; + + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + if (irq_trig != IRQF_TRIGGER_RISING) { + dev_err(dev, "non-rising trigger given for EOC interrupt, " + "trying to enforce it\n"); + irq_trig = IRQF_TRIGGER_RISING; + } + + init_completion(&data->done); + + ret = devm_request_threaded_irq(dev, + irq, + bmp085_eoc_irq, + NULL, + irq_trig, + name, + data); + if (ret) { + /* Bail out without IRQ but keep the driver in place */ + dev_err(dev, "unable to request DRDY IRQ\n"); + return 0; + } + + data->use_eoc = true; + return 0; +} + +int bmp280_common_probe(struct device *dev, + struct regmap *regmap, + unsigned int chip, + const char *name, + int irq) +{ + int ret; + struct iio_dev *indio_dev; + struct bmp280_data *data; + unsigned int chip_id; + struct gpio_desc *gpiod; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + mutex_init(&data->lock); + data->dev = dev; + + indio_dev->dev.parent = dev; + indio_dev->name = name; + indio_dev->channels = bmp280_channels; + indio_dev->info = &bmp280_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + switch (chip) { + case BMP180_CHIP_ID: + indio_dev->num_channels = 2; + data->chip_info = &bmp180_chip_info; + data->oversampling_press = ilog2(8); + data->oversampling_temp = ilog2(1); + data->start_up_time = 10000; + break; + case BMP280_CHIP_ID: + indio_dev->num_channels = 2; + data->chip_info = &bmp280_chip_info; + data->oversampling_press = ilog2(16); + data->oversampling_temp = ilog2(2); + data->start_up_time = 2000; + break; + case BME280_CHIP_ID: + indio_dev->num_channels = 3; + data->chip_info = &bme280_chip_info; + data->oversampling_press = ilog2(16); + data->oversampling_humid = ilog2(16); + data->oversampling_temp = ilog2(2); + data->start_up_time = 2000; + break; + default: + return -EINVAL; + } + + /* Bring up regulators */ + data->vddd = devm_regulator_get(dev, "vddd"); + if (IS_ERR(data->vddd)) { + dev_err(dev, "failed to get VDDD regulator\n"); + return PTR_ERR(data->vddd); + } + ret = regulator_enable(data->vddd); + if (ret) { + dev_err(dev, "failed to enable VDDD regulator\n"); + return ret; + } + data->vdda = devm_regulator_get(dev, "vdda"); + if (IS_ERR(data->vdda)) { + dev_err(dev, "failed to get VDDA regulator\n"); + ret = PTR_ERR(data->vdda); + goto out_disable_vddd; + } + ret = regulator_enable(data->vdda); + if (ret) { + dev_err(dev, "failed to enable VDDA regulator\n"); + goto out_disable_vddd; + } + /* Wait to make sure we started up properly */ + usleep_range(data->start_up_time, data->start_up_time + 100); + + /* Bring chip out of reset if there is an assigned GPIO line */ + gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + /* Deassert the signal */ + if (!IS_ERR(gpiod)) { + dev_info(dev, "release reset\n"); + gpiod_set_value(gpiod, 0); + } + + data->regmap = regmap; + ret = regmap_read(regmap, BMP280_REG_ID, &chip_id); + if (ret < 0) + goto out_disable_vdda; + if (chip_id != chip) { + dev_err(dev, "bad chip id: expected %x got %x\n", + chip, chip_id); + ret = -EINVAL; + goto out_disable_vdda; + } + + ret = data->chip_info->chip_config(data); + if (ret < 0) + goto out_disable_vdda; + + dev_set_drvdata(dev, indio_dev); + + /* + * Some chips have calibration parameters "programmed into the devices' + * non-volatile memory during production". Let's read them out at probe + * time once. They will not change. + */ + if (chip_id == BMP180_CHIP_ID) { + ret = bmp180_read_calib(data, &data->calib.bmp180); + if (ret < 0) { + dev_err(data->dev, + "failed to read calibration coefficients\n"); + goto out_disable_vdda; + } + } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) { + ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id); + if (ret < 0) { + dev_err(data->dev, + "failed to read calibration coefficients\n"); + goto out_disable_vdda; + } + } + + /* + * Attempt to grab an optional EOC IRQ - only the BMP085 has this + * however as it happens, the BMP085 shares the chip ID of BMP180 + * so we look for an IRQ if we have that. + */ + if (irq > 0 || (chip_id == BMP180_CHIP_ID)) { + ret = bmp085_fetch_eoc_irq(dev, name, irq, data); + if (ret) + goto out_disable_vdda; + } + + /* Enable runtime PM */ + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + /* + * Set autosuspend to two orders of magnitude larger than the + * start-up time. + */ + pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10); + pm_runtime_use_autosuspend(dev); + pm_runtime_put(dev); + + ret = iio_device_register(indio_dev); + if (ret) + goto out_runtime_pm_disable; + + + return 0; + +out_runtime_pm_disable: + pm_runtime_get_sync(data->dev); + pm_runtime_put_noidle(data->dev); + pm_runtime_disable(data->dev); +out_disable_vdda: + regulator_disable(data->vdda); +out_disable_vddd: + regulator_disable(data->vddd); + return ret; +} +EXPORT_SYMBOL(bmp280_common_probe); + +int bmp280_common_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmp280_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + pm_runtime_get_sync(data->dev); + pm_runtime_put_noidle(data->dev); + pm_runtime_disable(data->dev); + regulator_disable(data->vdda); + regulator_disable(data->vddd); + return 0; +} +EXPORT_SYMBOL(bmp280_common_remove); + +#ifdef CONFIG_PM +static int bmp280_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmp280_data *data = iio_priv(indio_dev); + int ret; + + ret = regulator_disable(data->vdda); + if (ret) + return ret; + return regulator_disable(data->vddd); +} + +static int bmp280_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmp280_data *data = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(data->vddd); + if (ret) + return ret; + ret = regulator_enable(data->vdda); + if (ret) + return ret; + usleep_range(data->start_up_time, data->start_up_time + 100); + return data->chip_info->chip_config(data); +} +#endif /* CONFIG_PM */ + +const struct dev_pm_ops bmp280_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(bmp280_runtime_suspend, + bmp280_runtime_resume, NULL) +}; +EXPORT_SYMBOL(bmp280_dev_pm_ops); + +MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); +MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c new file mode 100644 index 000000000..03742b15b --- /dev/null +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -0,0 +1,91 @@ +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/acpi.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#include "bmp280.h" + +static int bmp280_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const struct regmap_config *regmap_config; + + switch (id->driver_data) { + case BMP180_CHIP_ID: + regmap_config = &bmp180_regmap_config; + break; + case BMP280_CHIP_ID: + case BME280_CHIP_ID: + regmap_config = &bmp280_regmap_config; + break; + default: + return -EINVAL; + } + + regmap = devm_regmap_init_i2c(client, regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(regmap); + } + + return bmp280_common_probe(&client->dev, + regmap, + id->driver_data, + id->name, + client->irq); +} + +static int bmp280_i2c_remove(struct i2c_client *client) +{ + return bmp280_common_remove(&client->dev); +} + +static const struct acpi_device_id bmp280_acpi_i2c_match[] = { + {"BMP0280", BMP280_CHIP_ID }, + {"BMP0180", BMP180_CHIP_ID }, + {"BMP0085", BMP180_CHIP_ID }, + {"BME0280", BME280_CHIP_ID }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmp280_acpi_i2c_match); + +#ifdef CONFIG_OF +static const struct of_device_id bmp280_of_i2c_match[] = { + { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID }, + { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID }, + { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID }, + { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID }, + { }, +}; +MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match); +#else +#define bmp280_of_i2c_match NULL +#endif + +static const struct i2c_device_id bmp280_i2c_id[] = { + {"bmp280", BMP280_CHIP_ID }, + {"bmp180", BMP180_CHIP_ID }, + {"bmp085", BMP180_CHIP_ID }, + {"bme280", BME280_CHIP_ID }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id); + +static struct i2c_driver bmp280_i2c_driver = { + .driver = { + .name = "bmp280", + .acpi_match_table = ACPI_PTR(bmp280_acpi_i2c_match), + .of_match_table = of_match_ptr(bmp280_of_i2c_match), + .pm = &bmp280_dev_pm_ops, + }, + .probe = bmp280_i2c_probe, + .remove = bmp280_i2c_remove, + .id_table = bmp280_i2c_id, +}; +module_i2c_driver(bmp280_i2c_driver); + +MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); +MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c new file mode 100644 index 000000000..08c00ac32 --- /dev/null +++ b/drivers/iio/pressure/bmp280-regmap.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/device.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include "bmp280.h" + +static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_CTRL_MEAS: + case BMP280_REG_RESET: + return true; + default: + return false; + }; +} + +static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP180_REG_OUT_XLSB: + case BMP180_REG_OUT_LSB: + case BMP180_REG_OUT_MSB: + case BMP280_REG_CTRL_MEAS: + return true; + default: + return false; + } +} + +const struct regmap_config bmp180_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP180_REG_OUT_XLSB, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp180_is_writeable_reg, + .volatile_reg = bmp180_is_volatile_reg, +}; +EXPORT_SYMBOL(bmp180_regmap_config); + +static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_CONFIG: + case BMP280_REG_CTRL_HUMIDITY: + case BMP280_REG_CTRL_MEAS: + case BMP280_REG_RESET: + return true; + default: + return false; + }; +} + +static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_HUMIDITY_LSB: + case BMP280_REG_HUMIDITY_MSB: + case BMP280_REG_TEMP_XLSB: + case BMP280_REG_TEMP_LSB: + case BMP280_REG_TEMP_MSB: + case BMP280_REG_PRESS_XLSB: + case BMP280_REG_PRESS_LSB: + case BMP280_REG_PRESS_MSB: + case BMP280_REG_STATUS: + return true; + default: + return false; + } +} + +const struct regmap_config bmp280_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP280_REG_HUMIDITY_LSB, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp280_is_writeable_reg, + .volatile_reg = bmp280_is_volatile_reg, +}; +EXPORT_SYMBOL(bmp280_regmap_config); diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c new file mode 100644 index 000000000..17bc95586 --- /dev/null +++ b/drivers/iio/pressure/bmp280-spi.c @@ -0,0 +1,125 @@ +/* + * SPI interface for the BMP280 driver + * + * Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c + */ +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/err.h> +#include <linux/regmap.h> + +#include "bmp280.h" + +static int bmp280_regmap_spi_write(void *context, const void *data, + size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u8 buf[2]; + + memcpy(buf, data, 2); + /* + * The SPI register address (= full register address without bit 7) and + * the write command (bit7 = RW = '0') + */ + buf[0] &= ~0x80; + + return spi_write_then_read(spi, buf, 2, NULL, 0); +} + +static int bmp280_regmap_spi_read(void *context, const void *reg, + size_t reg_size, void *val, size_t val_size) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + + return spi_write_then_read(spi, reg, reg_size, val, val_size); +} + +static struct regmap_bus bmp280_regmap_bus = { + .write = bmp280_regmap_spi_write, + .read = bmp280_regmap_spi_read, + .reg_format_endian_default = REGMAP_ENDIAN_BIG, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + +static int bmp280_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct regmap *regmap; + const struct regmap_config *regmap_config; + int ret; + + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "spi_setup failed!\n"); + return ret; + } + + switch (id->driver_data) { + case BMP180_CHIP_ID: + regmap_config = &bmp180_regmap_config; + break; + case BMP280_CHIP_ID: + case BME280_CHIP_ID: + regmap_config = &bmp280_regmap_config; + break; + default: + return -EINVAL; + } + + regmap = devm_regmap_init(&spi->dev, + &bmp280_regmap_bus, + &spi->dev, + regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "failed to allocate register map\n"); + return PTR_ERR(regmap); + } + + return bmp280_common_probe(&spi->dev, + regmap, + id->driver_data, + id->name, + spi->irq); +} + +static int bmp280_spi_remove(struct spi_device *spi) +{ + return bmp280_common_remove(&spi->dev); +} + +static const struct of_device_id bmp280_of_spi_match[] = { + { .compatible = "bosch,bmp085", }, + { .compatible = "bosch,bmp180", }, + { .compatible = "bosch,bmp181", }, + { .compatible = "bosch,bmp280", }, + { .compatible = "bosch,bme280", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); + +static const struct spi_device_id bmp280_spi_id[] = { + { "bmp180", BMP180_CHIP_ID }, + { "bmp181", BMP180_CHIP_ID }, + { "bmp280", BMP280_CHIP_ID }, + { "bme280", BME280_CHIP_ID }, + { } +}; +MODULE_DEVICE_TABLE(spi, bmp280_spi_id); + +static struct spi_driver bmp280_spi_driver = { + .driver = { + .name = "bmp280", + .of_match_table = bmp280_of_spi_match, + .pm = &bmp280_dev_pm_ops, + }, + .id_table = bmp280_spi_id, + .probe = bmp280_spi_probe, + .remove = bmp280_spi_remove, +}; +module_spi_driver(bmp280_spi_driver); + +MODULE_DESCRIPTION("BMP280 SPI bus driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h new file mode 100644 index 000000000..eda50ef65 --- /dev/null +++ b/drivers/iio/pressure/bmp280.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/regmap.h> + +/* BMP280 specific registers */ +#define BMP280_REG_HUMIDITY_LSB 0xFE +#define BMP280_REG_HUMIDITY_MSB 0xFD +#define BMP280_REG_TEMP_XLSB 0xFC +#define BMP280_REG_TEMP_LSB 0xFB +#define BMP280_REG_TEMP_MSB 0xFA +#define BMP280_REG_PRESS_XLSB 0xF9 +#define BMP280_REG_PRESS_LSB 0xF8 +#define BMP280_REG_PRESS_MSB 0xF7 + +#define BMP280_REG_CONFIG 0xF5 +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_STATUS 0xF3 +#define BMP280_REG_CTRL_HUMIDITY 0xF2 + +/* Due to non linear mapping, and data sizes we can't do a bulk read */ +#define BMP280_REG_COMP_H1 0xA1 +#define BMP280_REG_COMP_H2 0xE1 +#define BMP280_REG_COMP_H3 0xE3 +#define BMP280_REG_COMP_H4 0xE4 +#define BMP280_REG_COMP_H5 0xE5 +#define BMP280_REG_COMP_H6 0xE7 + +#define BMP280_REG_COMP_TEMP_START 0x88 +#define BMP280_COMP_TEMP_REG_COUNT 6 + +#define BMP280_REG_COMP_PRESS_START 0x8E +#define BMP280_COMP_PRESS_REG_COUNT 18 + +#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BMP280_FILTER_OFF 0 +#define BMP280_FILTER_2X BIT(2) +#define BMP280_FILTER_4X BIT(3) +#define BMP280_FILTER_8X (BIT(3) | BIT(2)) +#define BMP280_FILTER_16X BIT(4) + +#define BMP280_OSRS_HUMIDITY_MASK (BIT(2) | BIT(1) | BIT(0)) +#define BMP280_OSRS_HUMIDITIY_X(osrs_h) ((osrs_h) << 0) +#define BMP280_OSRS_HUMIDITY_SKIP 0 +#define BMP280_OSRS_HUMIDITY_1X BMP280_OSRS_HUMIDITIY_X(1) +#define BMP280_OSRS_HUMIDITY_2X BMP280_OSRS_HUMIDITIY_X(2) +#define BMP280_OSRS_HUMIDITY_4X BMP280_OSRS_HUMIDITIY_X(3) +#define BMP280_OSRS_HUMIDITY_8X BMP280_OSRS_HUMIDITIY_X(4) +#define BMP280_OSRS_HUMIDITY_16X BMP280_OSRS_HUMIDITIY_X(5) + +#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) +#define BMP280_OSRS_TEMP_SKIP 0 +#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) +#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1) +#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2) +#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3) +#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4) +#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5) + +#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BMP280_OSRS_PRESS_SKIP 0 +#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2) +#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1) +#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2) +#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3) +#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4) +#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5) + +#define BMP280_MODE_MASK (BIT(1) | BIT(0)) +#define BMP280_MODE_SLEEP 0 +#define BMP280_MODE_FORCED BIT(0) +#define BMP280_MODE_NORMAL (BIT(1) | BIT(0)) + +/* BMP180 specific registers */ +#define BMP180_REG_OUT_XLSB 0xF8 +#define BMP180_REG_OUT_LSB 0xF7 +#define BMP180_REG_OUT_MSB 0xF6 + +#define BMP180_REG_CALIB_START 0xAA +#define BMP180_REG_CALIB_COUNT 22 + +#define BMP180_MEAS_SCO BIT(5) +#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0) +#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1) +#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2) +#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3) + +/* BMP180 and BMP280 common registers */ +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_RESET 0xE0 +#define BMP280_REG_ID 0xD0 + +#define BMP180_CHIP_ID 0x55 +#define BMP280_CHIP_ID 0x58 +#define BME280_CHIP_ID 0x60 +#define BMP280_SOFT_RESET_VAL 0xB6 + +/* BMP280 register skipped special values */ +#define BMP280_TEMP_SKIPPED 0x80000 +#define BMP280_PRESS_SKIPPED 0x80000 +#define BMP280_HUMIDITY_SKIPPED 0x8000 + +/* Regmap configurations */ +extern const struct regmap_config bmp180_regmap_config; +extern const struct regmap_config bmp280_regmap_config; + +/* Probe called from different transports */ +int bmp280_common_probe(struct device *dev, + struct regmap *regmap, + unsigned int chip, + const char *name, + int irq); +int bmp280_common_remove(struct device *dev); + +/* PM ops */ +extern const struct dev_pm_ops bmp280_dev_pm_ops; diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c new file mode 100644 index 000000000..87c07af91 --- /dev/null +++ b/drivers/iio/pressure/cros_ec_baro.c @@ -0,0 +1,216 @@ +/* + * cros_ec_baro - Driver for barometer sensor behind CrosEC. + * + * Copyright (C) 2017 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> +#include <linux/iio/iio.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/kernel.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +/* + * One channel for pressure, the other for timestamp. + */ +#define CROS_EC_BARO_MAX_CHANNELS (1 + 1) + +/* State data for ec_sensors iio driver. */ +struct cros_ec_baro_state { + /* Shared by all sensors */ + struct cros_ec_sensors_core_state core; + + struct iio_chan_spec channels[CROS_EC_BARO_MAX_CHANNELS]; +}; + +static int cros_ec_baro_read(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct cros_ec_baro_state *st = iio_priv(indio_dev); + u16 data = 0; + int ret = IIO_VAL_INT; + int idx = chan->scan_index; + + mutex_lock(&st->core.cmd_lock); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx, + (s16 *)&data) < 0) + ret = -EIO; + *val = data; + break; + case IIO_CHAN_INFO_SCALE: + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE; + st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE; + + if (cros_ec_motion_send_host_cmd(&st->core, 0)) { + ret = -EIO; + break; + } + *val = st->core.resp->sensor_range.ret; + + /* scale * in_pressure_raw --> kPa */ + *val2 = 10 << CROS_EC_SENSOR_BITS; + ret = IIO_VAL_FRACTIONAL; + break; + default: + ret = cros_ec_sensors_core_read(&st->core, chan, val, val2, + mask); + break; + } + + mutex_unlock(&st->core.cmd_lock); + + return ret; +} + +static int cros_ec_baro_write(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct cros_ec_baro_state *st = iio_priv(indio_dev); + int ret = 0; + + mutex_lock(&st->core.cmd_lock); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE; + st->core.param.sensor_range.data = val; + + /* Always roundup, so caller gets at least what it asks for. */ + st->core.param.sensor_range.roundup = 1; + + if (cros_ec_motion_send_host_cmd(&st->core, 0)) + ret = -EIO; + break; + default: + ret = cros_ec_sensors_core_write(&st->core, chan, val, val2, + mask); + break; + } + + mutex_unlock(&st->core.cmd_lock); + + return ret; +} + +static const struct iio_info cros_ec_baro_info = { + .read_raw = &cros_ec_baro_read, + .write_raw = &cros_ec_baro_write, +}; + +static int cros_ec_baro_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent); + struct iio_dev *indio_dev; + struct cros_ec_baro_state *state; + struct iio_chan_spec *channel; + int ret; + + if (!ec_dev || !ec_dev->ec_dev) { + dev_warn(dev, "No CROS EC device found.\n"); + return -EINVAL; + } + + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + ret = cros_ec_sensors_core_init(pdev, indio_dev, true); + if (ret) + return ret; + + indio_dev->info = &cros_ec_baro_info; + state = iio_priv(indio_dev); + state->core.type = state->core.resp->info.type; + state->core.loc = state->core.resp->info.location; + channel = state->channels; + /* Common part */ + channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + channel->info_mask_shared_by_all = + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_FREQUENCY); + channel->scan_type.realbits = CROS_EC_SENSOR_BITS; + channel->scan_type.storagebits = CROS_EC_SENSOR_BITS; + channel->scan_type.shift = 0; + channel->scan_index = 0; + channel->ext_info = cros_ec_sensors_ext_info; + channel->scan_type.sign = 'u'; + + state->core.calib[0] = 0; + + /* Sensor specific */ + switch (state->core.type) { + case MOTIONSENSE_TYPE_BARO: + channel->type = IIO_PRESSURE; + break; + default: + dev_warn(dev, "Unknown motion sensor\n"); + return -EINVAL; + } + + /* Timestamp */ + channel++; + channel->type = IIO_TIMESTAMP; + channel->channel = -1; + channel->scan_index = 1; + channel->scan_type.sign = 's'; + channel->scan_type.realbits = 64; + channel->scan_type.storagebits = 64; + + indio_dev->channels = state->channels; + indio_dev->num_channels = CROS_EC_BARO_MAX_CHANNELS; + + state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + cros_ec_sensors_capture, NULL); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct platform_device_id cros_ec_baro_ids[] = { + { + .name = "cros-ec-baro", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, cros_ec_baro_ids); + +static struct platform_driver cros_ec_baro_platform_driver = { + .driver = { + .name = "cros-ec-baro", + }, + .probe = cros_ec_baro_probe, + .id_table = cros_ec_baro_ids, +}; +module_platform_driver(cros_ec_baro_platform_driver); + +MODULE_DESCRIPTION("ChromeOS EC barometer sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c new file mode 100644 index 000000000..d7b1c00ce --- /dev/null +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -0,0 +1,386 @@ +/* + * HID Sensors Driver + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. + * + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/hid-sensor-hub.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include "../common/hid-sensors/hid-sensor-trigger.h" + +#define CHANNEL_SCAN_INDEX_PRESSURE 0 + +struct press_state { + struct hid_sensor_hub_callbacks callbacks; + struct hid_sensor_common common_attributes; + struct hid_sensor_hub_attribute_info press_attr; + u32 press_data; + int scale_pre_decml; + int scale_post_decml; + int scale_precision; + int value_offset; +}; + +/* Channel definitions */ +static const struct iio_chan_spec press_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_PRESSURE, + } +}; + +/* Adjust channel real bits based on report descriptor */ +static void press_adjust_channel_bit_mask(struct iio_chan_spec *channels, + int channel, int size) +{ + channels[channel].scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + channels[channel].scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is u32 */ + channels[channel].scan_type.storagebits = sizeof(u32) * 8; +} + +/* Channel read_raw handler */ +static int press_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct press_state *press_state = iio_priv(indio_dev); + int report_id = -1; + u32 address; + int ret_type; + s32 min; + + *val = 0; + *val2 = 0; + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->scan_index) { + case CHANNEL_SCAN_INDEX_PRESSURE: + report_id = press_state->press_attr.report_id; + min = press_state->press_attr.logical_minimum; + address = HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE; + break; + default: + report_id = -1; + break; + } + if (report_id >= 0) { + hid_sensor_power_state(&press_state->common_attributes, + true); + *val = sensor_hub_input_attr_get_raw_value( + press_state->common_attributes.hsdev, + HID_USAGE_SENSOR_PRESSURE, address, + report_id, + SENSOR_HUB_SYNC, + min < 0); + hid_sensor_power_state(&press_state->common_attributes, + false); + } else { + *val = 0; + return -EINVAL; + } + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = press_state->scale_pre_decml; + *val2 = press_state->scale_post_decml; + ret_type = press_state->scale_precision; + break; + case IIO_CHAN_INFO_OFFSET: + *val = press_state->value_offset; + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret_type = hid_sensor_read_samp_freq_value( + &press_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret_type = hid_sensor_read_raw_hyst_value( + &press_state->common_attributes, val, val2); + break; + default: + ret_type = -EINVAL; + break; + } + + return ret_type; +} + +/* Channel write_raw handler */ +static int press_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct press_state *press_state = iio_priv(indio_dev); + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_write_samp_freq_value( + &press_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_write_raw_hyst_value( + &press_state->common_attributes, val, val2); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct iio_info press_info = { + .read_raw = &press_read_raw, + .write_raw = &press_write_raw, +}; + +/* Function to push data to buffer */ +static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data, + int len) +{ + dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); + iio_push_to_buffers(indio_dev, data); +} + +/* Callback handler to send event after all samples are received and captured */ +static int press_proc_event(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct press_state *press_state = iio_priv(indio_dev); + + dev_dbg(&indio_dev->dev, "press_proc_event\n"); + if (atomic_read(&press_state->common_attributes.data_ready)) + hid_sensor_push_data(indio_dev, + &press_state->press_data, + sizeof(press_state->press_data)); + + return 0; +} + +/* Capture samples in local storage */ +static int press_capture_sample(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + size_t raw_len, char *raw_data, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct press_state *press_state = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (usage_id) { + case HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE: + press_state->press_data = *(u32 *)raw_data; + ret = 0; + break; + default: + break; + } + + return ret; +} + +/* Parse report which is specific to an usage id*/ +static int press_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + struct iio_chan_spec *channels, + unsigned usage_id, + struct press_state *st) +{ + int ret; + + ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE, + &st->press_attr); + if (ret < 0) + return ret; + press_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_PRESSURE, + st->press_attr.size); + + dev_dbg(&pdev->dev, "press %x:%x\n", st->press_attr.index, + st->press_attr.report_id); + + st->scale_precision = hid_sensor_format_scale( + HID_USAGE_SENSOR_PRESSURE, + &st->press_attr, + &st->scale_pre_decml, &st->scale_post_decml); + + /* Set Sensitivity field ids, when there is no individual modifier */ + if (st->common_attributes.sensitivity.index < 0) { + sensor_hub_input_get_attribute_info(hsdev, + HID_FEATURE_REPORT, usage_id, + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | + HID_USAGE_SENSOR_DATA_ATMOSPHERIC_PRESSURE, + &st->common_attributes.sensitivity); + dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", + st->common_attributes.sensitivity.index, + st->common_attributes.sensitivity.report_id); + } + return ret; +} + +/* Function to initialize the processing for usage id */ +static int hid_press_probe(struct platform_device *pdev) +{ + int ret = 0; + static const char *name = "press"; + struct iio_dev *indio_dev; + struct press_state *press_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct press_state)); + if (!indio_dev) + return -ENOMEM; + platform_set_drvdata(pdev, indio_dev); + + press_state = iio_priv(indio_dev); + press_state->common_attributes.hsdev = hsdev; + press_state->common_attributes.pdev = pdev; + + ret = hid_sensor_parse_common_attributes(hsdev, + HID_USAGE_SENSOR_PRESSURE, + &press_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "failed to setup common attributes\n"); + return ret; + } + + indio_dev->channels = kmemdup(press_channels, sizeof(press_channels), + GFP_KERNEL); + if (!indio_dev->channels) { + dev_err(&pdev->dev, "failed to duplicate channels\n"); + return -ENOMEM; + } + + ret = press_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, + HID_USAGE_SENSOR_PRESSURE, press_state); + if (ret) { + dev_err(&pdev->dev, "failed to setup attributes\n"); + goto error_free_dev_mem; + } + + indio_dev->num_channels = + ARRAY_SIZE(press_channels); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &press_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + NULL, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); + goto error_free_dev_mem; + } + atomic_set(&press_state->common_attributes.data_ready, 0); + ret = hid_sensor_setup_trigger(indio_dev, name, + &press_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "trigger setup failed\n"); + goto error_unreg_buffer_funcs; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "device register failed\n"); + goto error_remove_trigger; + } + + press_state->callbacks.send_event = press_proc_event; + press_state->callbacks.capture_sample = press_capture_sample; + press_state->callbacks.pdev = pdev; + ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_PRESSURE, + &press_state->callbacks); + if (ret < 0) { + dev_err(&pdev->dev, "callback reg failed\n"); + goto error_iio_unreg; + } + + return ret; + +error_iio_unreg: + iio_device_unregister(indio_dev); +error_remove_trigger: + hid_sensor_remove_trigger(&press_state->common_attributes); +error_unreg_buffer_funcs: + iio_triggered_buffer_cleanup(indio_dev); +error_free_dev_mem: + kfree(indio_dev->channels); + return ret; +} + +/* Function to deinitialize the processing for usage id */ +static int hid_press_remove(struct platform_device *pdev) +{ + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct press_state *press_state = iio_priv(indio_dev); + + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PRESSURE); + iio_device_unregister(indio_dev); + hid_sensor_remove_trigger(&press_state->common_attributes); + iio_triggered_buffer_cleanup(indio_dev); + kfree(indio_dev->channels); + + return 0; +} + +static const struct platform_device_id hid_press_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-200031", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_press_ids); + +static struct platform_driver hid_press_platform_driver = { + .id_table = hid_press_ids, + .driver = { + .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, + }, + .probe = hid_press_probe, + .remove = hid_press_remove, +}; +module_platform_driver(hid_press_platform_driver); + +MODULE_DESCRIPTION("HID Sensor Pressure"); +MODULE_AUTHOR("Archana Patni <archana.patni@intel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c new file mode 100644 index 000000000..406934ea6 --- /dev/null +++ b/drivers/iio/pressure/hp03.c @@ -0,0 +1,318 @@ +/* + * Copyright (c) 2016 Marek Vasut <marex@denx.de> + * + * Driver for Hope RF HP03 digital temperature and pressure sensor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "hp03: " fmt + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +/* + * The HP03 sensor occupies two fixed I2C addresses: + * 0x50 ... read-only EEPROM with calibration data + * 0x77 ... read-write ADC for pressure and temperature + */ +#define HP03_EEPROM_ADDR 0x50 +#define HP03_ADC_ADDR 0x77 + +#define HP03_EEPROM_CX_OFFSET 0x10 +#define HP03_EEPROM_AB_OFFSET 0x1e +#define HP03_EEPROM_CD_OFFSET 0x20 + +#define HP03_ADC_WRITE_REG 0xff +#define HP03_ADC_READ_REG 0xfd +#define HP03_ADC_READ_PRESSURE 0xf0 /* D1 in datasheet */ +#define HP03_ADC_READ_TEMP 0xe8 /* D2 in datasheet */ + +struct hp03_priv { + struct i2c_client *client; + struct mutex lock; + struct gpio_desc *xclr_gpio; + + struct i2c_client *eeprom_client; + struct regmap *eeprom_regmap; + + s32 pressure; /* kPa */ + s32 temp; /* Deg. C */ +}; + +static const struct iio_chan_spec hp03_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static bool hp03_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static bool hp03_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static const struct regmap_config hp03_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = HP03_EEPROM_CD_OFFSET + 1, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = hp03_is_writeable_reg, + .volatile_reg = hp03_is_volatile_reg, +}; + +static int hp03_get_temp_pressure(struct hp03_priv *priv, const u8 reg) +{ + int ret; + + ret = i2c_smbus_write_byte_data(priv->client, HP03_ADC_WRITE_REG, reg); + if (ret < 0) + return ret; + + msleep(50); /* Wait for conversion to finish */ + + return i2c_smbus_read_word_data(priv->client, HP03_ADC_READ_REG); +} + +static int hp03_update_temp_pressure(struct hp03_priv *priv) +{ + struct device *dev = &priv->client->dev; + u8 coefs[18]; + u16 cx_val[7]; + int ab_val, d1_val, d2_val, diff_val, dut, off, sens, x; + int i, ret; + + /* Sample coefficients from EEPROM */ + ret = regmap_bulk_read(priv->eeprom_regmap, HP03_EEPROM_CX_OFFSET, + coefs, sizeof(coefs)); + if (ret < 0) { + dev_err(dev, "Failed to read EEPROM (reg=%02x)\n", + HP03_EEPROM_CX_OFFSET); + return ret; + } + + /* Sample Temperature and Pressure */ + gpiod_set_value_cansleep(priv->xclr_gpio, 1); + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_PRESSURE); + if (ret < 0) { + dev_err(dev, "Failed to read pressure\n"); + goto err_adc; + } + d1_val = ret; + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_TEMP); + if (ret < 0) { + dev_err(dev, "Failed to read temperature\n"); + goto err_adc; + } + d2_val = ret; + + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + + /* The Cx coefficients and Temp/Pressure values are MSB first. */ + for (i = 0; i < 7; i++) + cx_val[i] = (coefs[2 * i] << 8) | (coefs[(2 * i) + 1] << 0); + d1_val = ((d1_val >> 8) & 0xff) | ((d1_val & 0xff) << 8); + d2_val = ((d2_val >> 8) & 0xff) | ((d2_val & 0xff) << 8); + + /* Coefficient voodoo from the HP03 datasheet. */ + if (d2_val >= cx_val[4]) + ab_val = coefs[14]; /* A-value */ + else + ab_val = coefs[15]; /* B-value */ + + diff_val = d2_val - cx_val[4]; + dut = (ab_val * (diff_val >> 7) * (diff_val >> 7)) >> coefs[16]; + dut = diff_val - dut; + + off = (cx_val[1] + (((cx_val[3] - 1024) * dut) >> 14)) * 4; + sens = cx_val[0] + ((cx_val[2] * dut) >> 10); + x = ((sens * (d1_val - 7168)) >> 14) - off; + + priv->pressure = ((x * 100) >> 5) + (cx_val[6] * 10); + priv->temp = 250 + ((dut * cx_val[5]) >> 16) - (dut >> coefs[17]); + + return 0; + +err_adc: + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + return ret; +} + +static int hp03_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct hp03_priv *priv = iio_priv(indio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = hp03_update_temp_pressure(priv); + mutex_unlock(&priv->lock); + + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_PRESSURE: + *val = priv->pressure; + return IIO_VAL_INT; + case IIO_TEMP: + *val = priv->temp; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return -EINVAL; +} + +static const struct iio_info hp03_info = { + .read_raw = &hp03_read_raw, +}; + +static int hp03_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct hp03_priv *priv; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->client = client; + mutex_init(&priv->lock); + + indio_dev->dev.parent = dev; + indio_dev->name = id->name; + indio_dev->channels = hp03_channels; + indio_dev->num_channels = ARRAY_SIZE(hp03_channels); + indio_dev->info = &hp03_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + priv->xclr_gpio = devm_gpiod_get_index(dev, "xclr", 0, GPIOD_OUT_HIGH); + if (IS_ERR(priv->xclr_gpio)) { + dev_err(dev, "Failed to claim XCLR GPIO\n"); + ret = PTR_ERR(priv->xclr_gpio); + return ret; + } + + /* + * Allocate another device for the on-sensor EEPROM, + * which has it's dedicated I2C address and contains + * the calibration constants for the sensor. + */ + priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR); + if (!priv->eeprom_client) { + dev_err(dev, "New EEPROM I2C device failed\n"); + return -ENODEV; + } + + priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client, + &hp03_regmap_config); + if (IS_ERR(priv->eeprom_regmap)) { + dev_err(dev, "Failed to allocate EEPROM regmap\n"); + ret = PTR_ERR(priv->eeprom_regmap); + goto err_cleanup_eeprom_client; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_cleanup_eeprom_regmap; + } + + i2c_set_clientdata(client, indio_dev); + + return 0; + +err_cleanup_eeprom_regmap: + regmap_exit(priv->eeprom_regmap); + +err_cleanup_eeprom_client: + i2c_unregister_device(priv->eeprom_client); + return ret; +} + +static int hp03_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hp03_priv *priv = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regmap_exit(priv->eeprom_regmap); + i2c_unregister_device(priv->eeprom_client); + + return 0; +} + +static const struct i2c_device_id hp03_id[] = { + { "hp03", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, hp03_id); + +static const struct of_device_id hp03_of_match[] = { + { .compatible = "hoperf,hp03" }, + { }, +}; +MODULE_DEVICE_TABLE(of, hp03_of_match); + +static struct i2c_driver hp03_driver = { + .driver = { + .name = "hp03", + .of_match_table = hp03_of_match, + }, + .probe = hp03_probe, + .remove = hp03_remove, + .id_table = hp03_id, +}; +module_i2c_driver(hp03_driver); + +MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); +MODULE_DESCRIPTION("Driver for Hope RF HP03 pressure and temperature sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c new file mode 100644 index 000000000..c38c19678 --- /dev/null +++ b/drivers/iio/pressure/hp206c.c @@ -0,0 +1,426 @@ +/* + * hp206c.c - HOPERF HP206C precision barometer and altimeter sensor + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x76) + * + * Datasheet: + * http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/delay.h> +#include <linux/util_macros.h> +#include <linux/acpi.h> + +/* I2C commands: */ +#define HP206C_CMD_SOFT_RST 0x06 + +#define HP206C_CMD_ADC_CVT 0x40 + +#define HP206C_CMD_ADC_CVT_OSR_4096 0x00 +#define HP206C_CMD_ADC_CVT_OSR_2048 0x04 +#define HP206C_CMD_ADC_CVT_OSR_1024 0x08 +#define HP206C_CMD_ADC_CVT_OSR_512 0x0c +#define HP206C_CMD_ADC_CVT_OSR_256 0x10 +#define HP206C_CMD_ADC_CVT_OSR_128 0x14 + +#define HP206C_CMD_ADC_CVT_CHNL_PT 0x00 +#define HP206C_CMD_ADC_CVT_CHNL_T 0x02 + +#define HP206C_CMD_READ_P 0x30 +#define HP206C_CMD_READ_T 0x32 + +#define HP206C_CMD_READ_REG 0x80 +#define HP206C_CMD_WRITE_REG 0xc0 + +#define HP206C_REG_INT_EN 0x0b +#define HP206C_REG_INT_CFG 0x0c + +#define HP206C_REG_INT_SRC 0x0d +#define HP206C_FLAG_DEV_RDY 0x40 + +#define HP206C_REG_PARA 0x0f +#define HP206C_FLAG_CMPS_EN 0x80 + +/* Maximum spin for DEV_RDY */ +#define HP206C_MAX_DEV_RDY_WAIT_COUNT 20 +#define HP206C_DEV_RDY_WAIT_US 20000 + +struct hp206c_data { + struct mutex mutex; + struct i2c_client *client; + int temp_osr_index; + int pres_osr_index; +}; + +struct hp206c_osr_setting { + u8 osr_mask; + unsigned int temp_conv_time_us; + unsigned int pres_conv_time_us; +}; + +/* Data from Table 5 in datasheet. */ +static const struct hp206c_osr_setting hp206c_osr_settings[] = { + { HP206C_CMD_ADC_CVT_OSR_4096, 65600, 131100 }, + { HP206C_CMD_ADC_CVT_OSR_2048, 32800, 65600 }, + { HP206C_CMD_ADC_CVT_OSR_1024, 16400, 32800 }, + { HP206C_CMD_ADC_CVT_OSR_512, 8200, 16400 }, + { HP206C_CMD_ADC_CVT_OSR_256, 4100, 8200 }, + { HP206C_CMD_ADC_CVT_OSR_128, 2100, 4100 }, +}; +static const int hp206c_osr_rates[] = { 4096, 2048, 1024, 512, 256, 128 }; +static const char hp206c_osr_rates_str[] = "4096 2048 1024 512 256 128"; + +static inline int hp206c_read_reg(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, HP206C_CMD_READ_REG | reg); +} + +static inline int hp206c_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, + HP206C_CMD_WRITE_REG | reg, val); +} + +static int hp206c_read_20bit(struct i2c_client *client, u8 cmd) +{ + int ret; + u8 values[3]; + + ret = i2c_smbus_read_i2c_block_data(client, cmd, 3, values); + if (ret < 0) + return ret; + if (ret != 3) + return -EIO; + return ((values[0] & 0xF) << 16) | (values[1] << 8) | (values[2]); +} + +/* Spin for max 160ms until DEV_RDY is 1, or return error. */ +static int hp206c_wait_dev_rdy(struct iio_dev *indio_dev) +{ + int ret; + int count = 0; + struct hp206c_data *data = iio_priv(indio_dev); + struct i2c_client *client = data->client; + + while (++count <= HP206C_MAX_DEV_RDY_WAIT_COUNT) { + ret = hp206c_read_reg(client, HP206C_REG_INT_SRC); + if (ret < 0) { + dev_err(&indio_dev->dev, "Failed READ_REG INT_SRC: %d\n", ret); + return ret; + } + if (ret & HP206C_FLAG_DEV_RDY) + return 0; + usleep_range(HP206C_DEV_RDY_WAIT_US, HP206C_DEV_RDY_WAIT_US * 3 / 2); + } + return -ETIMEDOUT; +} + +static int hp206c_set_compensation(struct i2c_client *client, bool enabled) +{ + int val; + + val = hp206c_read_reg(client, HP206C_REG_PARA); + if (val < 0) + return val; + if (enabled) + val |= HP206C_FLAG_CMPS_EN; + else + val &= ~HP206C_FLAG_CMPS_EN; + + return hp206c_write_reg(client, HP206C_REG_PARA, val); +} + +/* Do a soft reset */ +static int hp206c_soft_reset(struct iio_dev *indio_dev) +{ + int ret; + struct hp206c_data *data = iio_priv(indio_dev); + struct i2c_client *client = data->client; + + ret = i2c_smbus_write_byte(client, HP206C_CMD_SOFT_RST); + if (ret) { + dev_err(&client->dev, "Failed to reset device: %d\n", ret); + return ret; + } + + usleep_range(400, 600); + + ret = hp206c_wait_dev_rdy(indio_dev); + if (ret) { + dev_err(&client->dev, "Device not ready after soft reset: %d\n", ret); + return ret; + } + + ret = hp206c_set_compensation(client, true); + if (ret) + dev_err(&client->dev, "Failed to enable compensation: %d\n", ret); + return ret; +} + +static int hp206c_conv_and_read(struct iio_dev *indio_dev, + u8 conv_cmd, u8 read_cmd, + unsigned int sleep_us) +{ + int ret; + struct hp206c_data *data = iio_priv(indio_dev); + struct i2c_client *client = data->client; + + ret = hp206c_wait_dev_rdy(indio_dev); + if (ret < 0) { + dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); + return ret; + } + + ret = i2c_smbus_write_byte(client, conv_cmd); + if (ret < 0) { + dev_err(&indio_dev->dev, "Failed convert: %d\n", ret); + return ret; + } + + usleep_range(sleep_us, sleep_us * 3 / 2); + + ret = hp206c_wait_dev_rdy(indio_dev); + if (ret < 0) { + dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); + return ret; + } + + ret = hp206c_read_20bit(client, read_cmd); + if (ret < 0) + dev_err(&indio_dev->dev, "Failed read: %d\n", ret); + + return ret; +} + +static int hp206c_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret; + struct hp206c_data *data = iio_priv(indio_dev); + const struct hp206c_osr_setting *osr_setting; + u8 conv_cmd; + + mutex_lock(&data->mutex); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + switch (chan->type) { + case IIO_TEMP: + *val = hp206c_osr_rates[data->temp_osr_index]; + ret = IIO_VAL_INT; + break; + + case IIO_PRESSURE: + *val = hp206c_osr_rates[data->pres_osr_index]; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + } + break; + + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_TEMP: + osr_setting = &hp206c_osr_settings[data->temp_osr_index]; + conv_cmd = HP206C_CMD_ADC_CVT | + osr_setting->osr_mask | + HP206C_CMD_ADC_CVT_CHNL_T; + ret = hp206c_conv_and_read(indio_dev, + conv_cmd, + HP206C_CMD_READ_T, + osr_setting->temp_conv_time_us); + if (ret >= 0) { + /* 20 significant bits are provided. + * Extend sign over the rest. + */ + *val = sign_extend32(ret, 19); + ret = IIO_VAL_INT; + } + break; + + case IIO_PRESSURE: + osr_setting = &hp206c_osr_settings[data->pres_osr_index]; + conv_cmd = HP206C_CMD_ADC_CVT | + osr_setting->osr_mask | + HP206C_CMD_ADC_CVT_CHNL_PT; + ret = hp206c_conv_and_read(indio_dev, + conv_cmd, + HP206C_CMD_READ_P, + osr_setting->pres_conv_time_us); + if (ret >= 0) { + *val = ret; + ret = IIO_VAL_INT; + } + break; + default: + ret = -EINVAL; + } + break; + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 0; + *val2 = 10000; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + } + break; + + default: + ret = -EINVAL; + } + + mutex_unlock(&data->mutex); + return ret; +} + +static int hp206c_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret = 0; + struct hp206c_data *data = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO) + return -EINVAL; + mutex_lock(&data->mutex); + switch (chan->type) { + case IIO_TEMP: + data->temp_osr_index = find_closest_descending(val, + hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates)); + break; + case IIO_PRESSURE: + data->pres_osr_index = find_closest_descending(val, + hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates)); + break; + default: + ret = -EINVAL; + } + mutex_unlock(&data->mutex); + return ret; +} + +static const struct iio_chan_spec hp206c_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + } +}; + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(hp206c_osr_rates_str); + +static struct attribute *hp206c_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group hp206c_attribute_group = { + .attrs = hp206c_attributes, +}; + +static const struct iio_info hp206c_info = { + .attrs = &hp206c_attribute_group, + .read_raw = hp206c_read_raw, + .write_raw = hp206c_write_raw, +}; + +static int hp206c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct hp206c_data *data; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + dev_err(&client->dev, "Adapter does not support " + "all required i2c functionality\n"); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->mutex); + + indio_dev->info = &hp206c_info; + indio_dev->name = id->name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = hp206c_channels; + indio_dev->num_channels = ARRAY_SIZE(hp206c_channels); + + i2c_set_clientdata(client, indio_dev); + + /* Do a soft reset on probe */ + ret = hp206c_soft_reset(indio_dev); + if (ret) { + dev_err(&client->dev, "Failed to reset on startup: %d\n", ret); + return -ENODEV; + } + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id hp206c_id[] = { + {"hp206c"}, + {} +}; +MODULE_DEVICE_TABLE(i2c, hp206c_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id hp206c_acpi_match[] = { + {"HOP206C", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match); +#endif + +static struct i2c_driver hp206c_driver = { + .probe = hp206c_probe, + .id_table = hp206c_id, + .driver = { + .name = "hp206c", + .acpi_match_table = ACPI_PTR(hp206c_acpi_match), + }, +}; + +module_i2c_driver(hp206c_driver); + +MODULE_DESCRIPTION("HOPERF HP206C precision barometer and altimeter sensor"); +MODULE_AUTHOR("Leonard Crestez <leonard.crestez@intel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c new file mode 100644 index 000000000..ab4786d01 --- /dev/null +++ b/drivers/iio/pressure/mpl115.c @@ -0,0 +1,199 @@ +/* + * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * TODO: shutdown pin + * + */ + +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/delay.h> + +#include "mpl115.h" + +#define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */ +#define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */ +#define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */ +#define MPL115_B1 0x06 /* 2 bit integer, 13 bit fraction */ +#define MPL115_B2 0x08 /* 1 bit integer, 14 bit fraction */ +#define MPL115_C12 0x0a /* 0 bit integer, 13 bit fraction */ +#define MPL115_CONVERT 0x12 /* convert temperature and pressure */ + +struct mpl115_data { + struct device *dev; + struct mutex lock; + s16 a0; + s16 b1, b2; + s16 c12; + const struct mpl115_ops *ops; +}; + +static int mpl115_request(struct mpl115_data *data) +{ + int ret = data->ops->write(data->dev, MPL115_CONVERT, 0); + + if (ret < 0) + return ret; + + usleep_range(3000, 4000); + + return 0; +} + +static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2) +{ + int ret; + u16 padc, tadc; + int a1, y1, pcomp; + unsigned kpa; + + mutex_lock(&data->lock); + ret = mpl115_request(data); + if (ret < 0) + goto done; + + ret = data->ops->read(data->dev, MPL115_PADC); + if (ret < 0) + goto done; + padc = ret >> 6; + + ret = data->ops->read(data->dev, MPL115_TADC); + if (ret < 0) + goto done; + tadc = ret >> 6; + + /* see Freescale AN3785 */ + a1 = data->b1 + ((data->c12 * tadc) >> 11); + y1 = (data->a0 << 10) + a1 * padc; + + /* compensated pressure with 4 fractional bits */ + pcomp = (y1 + ((data->b2 * (int) tadc) >> 1)) >> 9; + + kpa = pcomp * (115 - 50) / 1023 + (50 << 4); + *val = kpa >> 4; + *val2 = (kpa & 15) * (1000000 >> 4); +done: + mutex_unlock(&data->lock); + return ret; +} + +static int mpl115_read_temp(struct mpl115_data *data) +{ + int ret; + + mutex_lock(&data->lock); + ret = mpl115_request(data); + if (ret < 0) + goto done; + ret = data->ops->read(data->dev, MPL115_TADC); +done: + mutex_unlock(&data->lock); + return ret; +} + +static int mpl115_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mpl115_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ret = mpl115_comp_pressure(data, val, val2); + if (ret < 0) + return ret; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_RAW: + /* temperature -5.35 C / LSB, 472 LSB is 25 C */ + ret = mpl115_read_temp(data); + if (ret < 0) + return ret; + *val = ret >> 6; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + *val = -605; + *val2 = 750000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SCALE: + *val = -186; + *val2 = 915888; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static const struct iio_chan_spec mpl115_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static const struct iio_info mpl115_info = { + .read_raw = &mpl115_read_raw, +}; + +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops) +{ + struct mpl115_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->dev = dev; + data->ops = ops; + mutex_init(&data->lock); + + indio_dev->info = &mpl115_info; + indio_dev->name = name; + indio_dev->dev.parent = dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mpl115_channels; + indio_dev->num_channels = ARRAY_SIZE(mpl115_channels); + + ret = data->ops->init(data->dev); + if (ret) + return ret; + + ret = data->ops->read(data->dev, MPL115_A0); + if (ret < 0) + return ret; + data->a0 = ret; + ret = data->ops->read(data->dev, MPL115_B1); + if (ret < 0) + return ret; + data->b1 = ret; + ret = data->ops->read(data->dev, MPL115_B2); + if (ret < 0) + return ret; + data->b2 = ret; + ret = data->ops->read(data->dev, MPL115_C12); + if (ret < 0) + return ret; + data->c12 = ret; + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_GPL(mpl115_probe); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mpl115.h b/drivers/iio/pressure/mpl115.h new file mode 100644 index 000000000..01b652774 --- /dev/null +++ b/drivers/iio/pressure/mpl115.h @@ -0,0 +1,24 @@ +/* + * Freescale MPL115A pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ + +#ifndef _MPL115_H_ +#define _MPL115_H_ + +struct mpl115_ops { + int (*init)(struct device *); + int (*read)(struct device *, u8); + int (*write)(struct device *, u8, u8); +}; + +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops); + +#endif diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c new file mode 100644 index 000000000..1a29be462 --- /dev/null +++ b/drivers/iio/pressure/mpl115_i2c.c @@ -0,0 +1,67 @@ +/* + * Freescale MPL115A2 pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x60) + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf + */ + +#include <linux/module.h> +#include <linux/i2c.h> + +#include "mpl115.h" + +static int mpl115_i2c_init(struct device *dev) +{ + return 0; +} + +static int mpl115_i2c_read(struct device *dev, u8 address) +{ + return i2c_smbus_read_word_swapped(to_i2c_client(dev), address); +} + +static int mpl115_i2c_write(struct device *dev, u8 address, u8 value) +{ + return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value); +} + +static const struct mpl115_ops mpl115_i2c_ops = { + .init = mpl115_i2c_init, + .read = mpl115_i2c_read, + .write = mpl115_i2c_write, +}; + +static int mpl115_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops); +} + +static const struct i2c_device_id mpl115_i2c_id[] = { + { "mpl115", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id); + +static struct i2c_driver mpl115_i2c_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_i2c_probe, + .id_table = mpl115_i2c_id, +}; +module_i2c_driver(mpl115_i2c_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mpl115_spi.c b/drivers/iio/pressure/mpl115_spi.c new file mode 100644 index 000000000..9ebf55f5b --- /dev/null +++ b/drivers/iio/pressure/mpl115_spi.c @@ -0,0 +1,106 @@ +/* + * Freescale MPL115A1 pressure/temperature sensor + * + * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> + +#include "mpl115.h" + +#define MPL115_SPI_WRITE(address) ((address) << 1) +#define MPL115_SPI_READ(address) (0x80 | (address) << 1) + +struct mpl115_spi_buf { + u8 tx[4]; + u8 rx[4]; +}; + +static int mpl115_spi_init(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf; + + buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_set_drvdata(spi, buf); + + return 0; +} + +static int mpl115_spi_read(struct device *dev, u8 address) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .rx_buf = buf->rx, + .len = 4, + }; + int ret; + + buf->tx[0] = MPL115_SPI_READ(address); + buf->tx[2] = MPL115_SPI_READ(address + 1); + + ret = spi_sync_transfer(spi, &xfer, 1); + if (ret) + return ret; + + return (buf->rx[1] << 8) | buf->rx[3]; +} + +static int mpl115_spi_write(struct device *dev, u8 address, u8 value) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .len = 2, + }; + + buf->tx[0] = MPL115_SPI_WRITE(address); + buf->tx[1] = value; + + return spi_sync_transfer(spi, &xfer, 1); +} + +static const struct mpl115_ops mpl115_spi_ops = { + .init = mpl115_spi_init, + .read = mpl115_spi_read, + .write = mpl115_spi_write, +}; + +static int mpl115_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops); +} + +static const struct spi_device_id mpl115_spi_ids[] = { + { "mpl115", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, mpl115_spi_ids); + +static struct spi_driver mpl115_spi_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_spi_probe, + .id_table = mpl115_spi_ids, +}; +module_spi_driver(mpl115_spi_driver); + +MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>"); +MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c new file mode 100644 index 000000000..bd001062d --- /dev/null +++ b/drivers/iio/pressure/mpl3115.c @@ -0,0 +1,350 @@ +/* + * mpl3115.c - Support for Freescale MPL3115A2 pressure/temperature sensor + * + * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x60) + * + * TODO: FIFO buffer, altimeter mode, oversampling, continuous mode, + * interrupts, user offset correction, raw mode + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/delay.h> + +#define MPL3115_STATUS 0x00 +#define MPL3115_OUT_PRESS 0x01 /* MSB first, 20 bit */ +#define MPL3115_OUT_TEMP 0x04 /* MSB first, 12 bit */ +#define MPL3115_WHO_AM_I 0x0c +#define MPL3115_CTRL_REG1 0x26 + +#define MPL3115_DEVICE_ID 0xc4 + +#define MPL3115_STATUS_PRESS_RDY BIT(2) +#define MPL3115_STATUS_TEMP_RDY BIT(1) + +#define MPL3115_CTRL_RESET BIT(2) /* software reset */ +#define MPL3115_CTRL_OST BIT(1) /* initiate measurement */ +#define MPL3115_CTRL_ACTIVE BIT(0) /* continuous measurement */ +#define MPL3115_CTRL_OS_258MS (BIT(5) | BIT(4)) /* 64x oversampling */ + +struct mpl3115_data { + struct i2c_client *client; + struct mutex lock; + u8 ctrl_reg1; +}; + +static int mpl3115_request(struct mpl3115_data *data) +{ + int ret, tries = 15; + + /* trigger measurement */ + ret = i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, + data->ctrl_reg1 | MPL3115_CTRL_OST); + if (ret < 0) + return ret; + + while (tries-- > 0) { + ret = i2c_smbus_read_byte_data(data->client, MPL3115_CTRL_REG1); + if (ret < 0) + return ret; + /* wait for data ready, i.e. OST cleared */ + if (!(ret & MPL3115_CTRL_OST)) + break; + msleep(20); + } + + if (tries < 0) { + dev_err(&data->client->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +static int mpl3115_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mpl3115_data *data = iio_priv(indio_dev); + __be32 tmp = 0; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (chan->type) { + case IIO_PRESSURE: /* in 0.25 pascal / LSB */ + mutex_lock(&data->lock); + ret = mpl3115_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + break; + } + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_PRESS, 3, (u8 *) &tmp); + mutex_unlock(&data->lock); + if (ret < 0) + break; + *val = be32_to_cpu(tmp) >> 12; + ret = IIO_VAL_INT; + break; + case IIO_TEMP: /* in 0.0625 celsius / LSB */ + mutex_lock(&data->lock); + ret = mpl3115_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + break; + } + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_TEMP, 2, (u8 *) &tmp); + mutex_unlock(&data->lock); + if (ret < 0) + break; + *val = sign_extend32(be32_to_cpu(tmp) >> 20, 11); + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(indio_dev); + return ret; + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_PRESSURE: + *val = 0; + *val2 = 250; /* want kilopascal */ + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 0; + *val2 = 62500; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + } + return -EINVAL; +} + +static irqreturn_t mpl3115_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct mpl3115_data *data = iio_priv(indio_dev); + /* + * 32-bit channel + 16-bit channel + padding + ts + * Note that it is possible for only one of the first 2 + * channels to be enabled. If that happens, the first element + * of the buffer may be either 16 or 32-bits. As such we cannot + * use a simple structure definition to express this data layout. + */ + u8 buffer[16] __aligned(8); + int ret, pos = 0; + + mutex_lock(&data->lock); + ret = mpl3115_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + + memset(buffer, 0, sizeof(buffer)); + if (test_bit(0, indio_dev->active_scan_mask)) { + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_PRESS, 3, &buffer[pos]); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + pos += 4; + } + + if (test_bit(1, indio_dev->active_scan_mask)) { + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_TEMP, 2, &buffer[pos]); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + } + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, + iio_get_time_ns(indio_dev)); + +done: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static const struct iio_chan_spec mpl3115_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 20, + .storagebits = 32, + .shift = 12, + .endianness = IIO_BE, + } + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 12, + .storagebits = 16, + .shift = 4, + .endianness = IIO_BE, + } + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +static const struct iio_info mpl3115_info = { + .read_raw = &mpl3115_read_raw, +}; + +static int mpl3115_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mpl3115_data *data; + struct iio_dev *indio_dev; + int ret; + + ret = i2c_smbus_read_byte_data(client, MPL3115_WHO_AM_I); + if (ret < 0) + return ret; + if (ret != MPL3115_DEVICE_ID) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->lock); + + i2c_set_clientdata(client, indio_dev); + indio_dev->info = &mpl3115_info; + indio_dev->name = id->name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mpl3115_channels; + indio_dev->num_channels = ARRAY_SIZE(mpl3115_channels); + + /* software reset, I2C transfer is aborted (fails) */ + i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, + MPL3115_CTRL_RESET); + msleep(50); + + data->ctrl_reg1 = MPL3115_CTRL_OS_258MS; + ret = i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, + data->ctrl_reg1); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + mpl3115_trigger_handler, NULL); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + return 0; + +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + return ret; +} + +static int mpl3115_standby(struct mpl3115_data *data) +{ + return i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, + data->ctrl_reg1 & ~MPL3115_CTRL_ACTIVE); +} + +static int mpl3115_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + mpl3115_standby(iio_priv(indio_dev)); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mpl3115_suspend(struct device *dev) +{ + return mpl3115_standby(iio_priv(i2c_get_clientdata( + to_i2c_client(dev)))); +} + +static int mpl3115_resume(struct device *dev) +{ + struct mpl3115_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + + return i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, + data->ctrl_reg1); +} + +static SIMPLE_DEV_PM_OPS(mpl3115_pm_ops, mpl3115_suspend, mpl3115_resume); +#define MPL3115_PM_OPS (&mpl3115_pm_ops) +#else +#define MPL3115_PM_OPS NULL +#endif + +static const struct i2c_device_id mpl3115_id[] = { + { "mpl3115", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpl3115_id); + +static const struct of_device_id mpl3115_of_match[] = { + { .compatible = "fsl,mpl3115" }, + { } +}; +MODULE_DEVICE_TABLE(of, mpl3115_of_match); + +static struct i2c_driver mpl3115_driver = { + .driver = { + .name = "mpl3115", + .of_match_table = mpl3115_of_match, + .pm = MPL3115_PM_OPS, + }, + .probe = mpl3115_probe, + .remove = mpl3115_remove, + .id_table = mpl3115_id, +}; +module_i2c_driver(mpl3115_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Freescale MPL3115 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h new file mode 100644 index 000000000..ead9e9f85 --- /dev/null +++ b/drivers/iio/pressure/ms5611.h @@ -0,0 +1,69 @@ +/* + * MS5611 pressure and temperature sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _MS5611_H +#define _MS5611_H + +#include <linux/device.h> +#include <linux/iio/iio.h> +#include <linux/mutex.h> + +struct regulator; + +#define MS5611_RESET 0x1e +#define MS5611_READ_ADC 0x00 +#define MS5611_READ_PROM_WORD 0xA0 +#define MS5611_PROM_WORDS_NB 8 + +enum { + MS5611, + MS5607, +}; + +struct ms5611_chip_info { + u16 prom[MS5611_PROM_WORDS_NB]; + + int (*temp_and_pressure_compensate)(struct ms5611_chip_info *chip_info, + s32 *temp, s32 *pressure); +}; + +/* + * OverSampling Rate descriptor. + * Warning: cmd MUST be kept aligned on a word boundary (see + * m5611_spi_read_adc_temp_and_pressure in ms5611_spi.c). + */ +struct ms5611_osr { + unsigned long conv_usec; + u8 cmd; + unsigned short rate; +}; + +struct ms5611_state { + void *client; + struct mutex lock; + + const struct ms5611_osr *pressure_osr; + const struct ms5611_osr *temp_osr; + + int (*reset)(struct device *dev); + int (*read_prom_word)(struct device *dev, int index, u16 *word); + int (*read_adc_temp_and_pressure)(struct device *dev, + s32 *temp, s32 *pressure); + + struct ms5611_chip_info *chip_info; + struct regulator *vdd; +}; + +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, + const char *name, int type); +int ms5611_remove(struct iio_dev *indio_dev); + +#endif /* _MS5611_H */ diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c new file mode 100644 index 000000000..f4ea886fd --- /dev/null +++ b/drivers/iio/pressure/ms5611_core.c @@ -0,0 +1,493 @@ +/* + * MS5611 pressure and temperature sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Data sheet: + * http://www.meas-spec.com/downloads/MS5611-01BA03.pdf + * http://www.meas-spec.com/downloads/MS5607-02BA03.pdf + * + */ + +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include "ms5611.h" + +#define MS5611_INIT_OSR(_cmd, _conv_usec, _rate) \ + { .cmd = _cmd, .conv_usec = _conv_usec, .rate = _rate } + +static const struct ms5611_osr ms5611_avail_pressure_osr[] = { + MS5611_INIT_OSR(0x40, 600, 256), + MS5611_INIT_OSR(0x42, 1170, 512), + MS5611_INIT_OSR(0x44, 2280, 1024), + MS5611_INIT_OSR(0x46, 4540, 2048), + MS5611_INIT_OSR(0x48, 9040, 4096) +}; + +static const struct ms5611_osr ms5611_avail_temp_osr[] = { + MS5611_INIT_OSR(0x50, 600, 256), + MS5611_INIT_OSR(0x52, 1170, 512), + MS5611_INIT_OSR(0x54, 2280, 1024), + MS5611_INIT_OSR(0x56, 4540, 2048), + MS5611_INIT_OSR(0x58, 9040, 4096) +}; + +static const char ms5611_show_osr[] = "256 512 1024 2048 4096"; + +static IIO_CONST_ATTR(oversampling_ratio_available, ms5611_show_osr); + +static struct attribute *ms5611_attributes[] = { + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ms5611_attribute_group = { + .attrs = ms5611_attributes, +}; + +static bool ms5611_prom_is_valid(u16 *prom, size_t len) +{ + int i, j; + uint16_t crc = 0, crc_orig = prom[7] & 0x000F; + + prom[7] &= 0xFF00; + + for (i = 0; i < len * 2; i++) { + if (i % 2 == 1) + crc ^= prom[i >> 1] & 0x00FF; + else + crc ^= prom[i >> 1] >> 8; + + for (j = 0; j < 8; j++) { + if (crc & 0x8000) + crc = (crc << 1) ^ 0x3000; + else + crc <<= 1; + } + } + + crc = (crc >> 12) & 0x000F; + + return crc_orig != 0x0000 && crc == crc_orig; +} + +static int ms5611_read_prom(struct iio_dev *indio_dev) +{ + int ret, i; + struct ms5611_state *st = iio_priv(indio_dev); + + for (i = 0; i < MS5611_PROM_WORDS_NB; i++) { + ret = st->read_prom_word(&indio_dev->dev, + i, &st->chip_info->prom[i]); + if (ret < 0) { + dev_err(&indio_dev->dev, + "failed to read prom at %d\n", i); + return ret; + } + } + + if (!ms5611_prom_is_valid(st->chip_info->prom, MS5611_PROM_WORDS_NB)) { + dev_err(&indio_dev->dev, "PROM integrity check failed\n"); + return -ENODEV; + } + + return 0; +} + +static int ms5611_read_temp_and_pressure(struct iio_dev *indio_dev, + s32 *temp, s32 *pressure) +{ + int ret; + struct ms5611_state *st = iio_priv(indio_dev); + + ret = st->read_adc_temp_and_pressure(&indio_dev->dev, temp, pressure); + if (ret < 0) { + dev_err(&indio_dev->dev, + "failed to read temperature and pressure\n"); + return ret; + } + + return st->chip_info->temp_and_pressure_compensate(st->chip_info, + temp, pressure); +} + +static int ms5611_temp_and_pressure_compensate(struct ms5611_chip_info *chip_info, + s32 *temp, s32 *pressure) +{ + s32 t = *temp, p = *pressure; + s64 off, sens, dt; + + dt = t - (chip_info->prom[5] << 8); + off = ((s64)chip_info->prom[2] << 16) + ((chip_info->prom[4] * dt) >> 7); + sens = ((s64)chip_info->prom[1] << 15) + ((chip_info->prom[3] * dt) >> 8); + + t = 2000 + ((chip_info->prom[6] * dt) >> 23); + if (t < 2000) { + s64 off2, sens2, t2; + + t2 = (dt * dt) >> 31; + off2 = (5 * (t - 2000) * (t - 2000)) >> 1; + sens2 = off2 >> 1; + + if (t < -1500) { + s64 tmp = (t + 1500) * (t + 1500); + + off2 += 7 * tmp; + sens2 += (11 * tmp) >> 1; + } + + t -= t2; + off -= off2; + sens -= sens2; + } + + *temp = t; + *pressure = (((p * sens) >> 21) - off) >> 15; + + return 0; +} + +static int ms5607_temp_and_pressure_compensate(struct ms5611_chip_info *chip_info, + s32 *temp, s32 *pressure) +{ + s32 t = *temp, p = *pressure; + s64 off, sens, dt; + + dt = t - (chip_info->prom[5] << 8); + off = ((s64)chip_info->prom[2] << 17) + ((chip_info->prom[4] * dt) >> 6); + sens = ((s64)chip_info->prom[1] << 16) + ((chip_info->prom[3] * dt) >> 7); + + t = 2000 + ((chip_info->prom[6] * dt) >> 23); + if (t < 2000) { + s64 off2, sens2, t2, tmp; + + t2 = (dt * dt) >> 31; + tmp = (t - 2000) * (t - 2000); + off2 = (61 * tmp) >> 4; + sens2 = tmp << 1; + + if (t < -1500) { + tmp = (t + 1500) * (t + 1500); + off2 += 15 * tmp; + sens2 += 8 * tmp; + } + + t -= t2; + off -= off2; + sens -= sens2; + } + + *temp = t; + *pressure = (((p * sens) >> 21) - off) >> 15; + + return 0; +} + +static int ms5611_reset(struct iio_dev *indio_dev) +{ + int ret; + struct ms5611_state *st = iio_priv(indio_dev); + + ret = st->reset(&indio_dev->dev); + if (ret < 0) { + dev_err(&indio_dev->dev, "failed to reset device\n"); + return ret; + } + + usleep_range(3000, 4000); + + return 0; +} + +static irqreturn_t ms5611_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ms5611_state *st = iio_priv(indio_dev); + /* Ensure buffer elements are naturally aligned */ + struct { + s32 channels[2]; + s64 ts __aligned(8); + } scan; + int ret; + + mutex_lock(&st->lock); + ret = ms5611_read_temp_and_pressure(indio_dev, &scan.channels[1], + &scan.channels[0]); + mutex_unlock(&st->lock); + if (ret < 0) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, &scan, + iio_get_time_ns(indio_dev)); + +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int ms5611_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + s32 temp, pressure; + struct ms5611_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&st->lock); + ret = ms5611_read_temp_and_pressure(indio_dev, + &temp, &pressure); + mutex_unlock(&st->lock); + if (ret < 0) + return ret; + + switch (chan->type) { + case IIO_TEMP: + *val = temp * 10; + return IIO_VAL_INT; + case IIO_PRESSURE: + *val = pressure / 1000; + *val2 = (pressure % 1000) * 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + if (chan->type != IIO_TEMP && chan->type != IIO_PRESSURE) + break; + mutex_lock(&st->lock); + if (chan->type == IIO_TEMP) + *val = (int)st->temp_osr->rate; + else + *val = (int)st->pressure_osr->rate; + mutex_unlock(&st->lock); + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static const struct ms5611_osr *ms5611_find_osr(int rate, + const struct ms5611_osr *osr, + size_t count) +{ + unsigned int r; + + for (r = 0; r < count; r++) + if ((unsigned short)rate == osr[r].rate) + break; + if (r >= count) + return NULL; + return &osr[r]; +} + +static int ms5611_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ms5611_state *st = iio_priv(indio_dev); + const struct ms5611_osr *osr = NULL; + int ret; + + if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO) + return -EINVAL; + + if (chan->type == IIO_TEMP) + osr = ms5611_find_osr(val, ms5611_avail_temp_osr, + ARRAY_SIZE(ms5611_avail_temp_osr)); + else if (chan->type == IIO_PRESSURE) + osr = ms5611_find_osr(val, ms5611_avail_pressure_osr, + ARRAY_SIZE(ms5611_avail_pressure_osr)); + if (!osr) + return -EINVAL; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + mutex_lock(&st->lock); + + if (chan->type == IIO_TEMP) + st->temp_osr = osr; + else + st->pressure_osr = osr; + + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); + + return 0; +} + +static const unsigned long ms5611_scan_masks[] = {0x3, 0}; + +static struct ms5611_chip_info chip_info_tbl[] = { + [MS5611] = { + .temp_and_pressure_compensate = ms5611_temp_and_pressure_compensate, + }, + [MS5607] = { + .temp_and_pressure_compensate = ms5607_temp_and_pressure_compensate, + } +}; + +static const struct iio_chan_spec ms5611_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +static const struct iio_info ms5611_info = { + .read_raw = &ms5611_read_raw, + .write_raw = &ms5611_write_raw, + .attrs = &ms5611_attribute_group, +}; + +static int ms5611_init(struct iio_dev *indio_dev) +{ + int ret; + struct ms5611_state *st = iio_priv(indio_dev); + + /* Enable attached regulator if any. */ + st->vdd = devm_regulator_get(indio_dev->dev.parent, "vdd"); + if (IS_ERR(st->vdd)) + return PTR_ERR(st->vdd); + + ret = regulator_enable(st->vdd); + if (ret) { + dev_err(indio_dev->dev.parent, + "failed to enable Vdd supply: %d\n", ret); + return ret; + } + + ret = ms5611_reset(indio_dev); + if (ret < 0) + goto err_regulator_disable; + + ret = ms5611_read_prom(indio_dev); + if (ret < 0) + goto err_regulator_disable; + + return 0; + +err_regulator_disable: + regulator_disable(st->vdd); + return ret; +} + +static void ms5611_fini(const struct iio_dev *indio_dev) +{ + const struct ms5611_state *st = iio_priv(indio_dev); + + regulator_disable(st->vdd); +} + +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, + const char *name, int type) +{ + int ret; + struct ms5611_state *st = iio_priv(indio_dev); + + mutex_init(&st->lock); + st->chip_info = &chip_info_tbl[type]; + st->temp_osr = + &ms5611_avail_temp_osr[ARRAY_SIZE(ms5611_avail_temp_osr) - 1]; + st->pressure_osr = + &ms5611_avail_pressure_osr[ARRAY_SIZE(ms5611_avail_pressure_osr) + - 1]; + indio_dev->dev.parent = dev; + indio_dev->name = name; + indio_dev->info = &ms5611_info; + indio_dev->channels = ms5611_channels; + indio_dev->num_channels = ARRAY_SIZE(ms5611_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = ms5611_scan_masks; + + ret = ms5611_init(indio_dev); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ms5611_trigger_handler, NULL); + if (ret < 0) { + dev_err(dev, "iio triggered buffer setup failed\n"); + goto err_fini; + } + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(dev, "unable to register iio device\n"); + goto err_buffer_cleanup; + } + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +err_fini: + ms5611_fini(indio_dev); + return ret; +} +EXPORT_SYMBOL(ms5611_probe); + +int ms5611_remove(struct iio_dev *indio_dev) +{ + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + ms5611_fini(indio_dev); + + return 0; +} +EXPORT_SYMBOL(ms5611_remove); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("MS5611 core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c new file mode 100644 index 000000000..55fb5fc0b --- /dev/null +++ b/drivers/iio/pressure/ms5611_i2c.c @@ -0,0 +1,148 @@ +/* + * MS5611 pressure and temperature sensor driver (I2C bus) + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 7-bit I2C slave addresses: + * + * 0x77 (CSB pin low) + * 0x76 (CSB pin high) + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> + +#include "ms5611.h" + +static int ms5611_i2c_reset(struct device *dev) +{ + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + return i2c_smbus_write_byte(st->client, MS5611_RESET); +} + +static int ms5611_i2c_read_prom_word(struct device *dev, int index, u16 *word) +{ + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + ret = i2c_smbus_read_word_swapped(st->client, + MS5611_READ_PROM_WORD + (index << 1)); + if (ret < 0) + return ret; + + *word = ret; + + return 0; +} + +static int ms5611_i2c_read_adc(struct ms5611_state *st, s32 *val) +{ + int ret; + u8 buf[3]; + + ret = i2c_smbus_read_i2c_block_data(st->client, MS5611_READ_ADC, + 3, buf); + if (ret < 0) + return ret; + + *val = (buf[0] << 16) | (buf[1] << 8) | buf[2]; + + return 0; +} + +static int ms5611_i2c_read_adc_temp_and_pressure(struct device *dev, + s32 *temp, s32 *pressure) +{ + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + const struct ms5611_osr *osr = st->temp_osr; + + ret = i2c_smbus_write_byte(st->client, osr->cmd); + if (ret < 0) + return ret; + + usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL)); + ret = ms5611_i2c_read_adc(st, temp); + if (ret < 0) + return ret; + + osr = st->pressure_osr; + ret = i2c_smbus_write_byte(st->client, osr->cmd); + if (ret < 0) + return ret; + + usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL)); + return ms5611_i2c_read_adc(st, pressure); +} + +static int ms5611_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ms5611_state *st; + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_READ_WORD_DATA | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + st->reset = ms5611_i2c_reset; + st->read_prom_word = ms5611_i2c_read_prom_word; + st->read_adc_temp_and_pressure = ms5611_i2c_read_adc_temp_and_pressure; + st->client = client; + + return ms5611_probe(indio_dev, &client->dev, id->name, id->driver_data); +} + +static int ms5611_i2c_remove(struct i2c_client *client) +{ + return ms5611_remove(i2c_get_clientdata(client)); +} + +#if defined(CONFIG_OF) +static const struct of_device_id ms5611_i2c_matches[] = { + { .compatible = "meas,ms5611" }, + { .compatible = "ms5611" }, + { .compatible = "meas,ms5607" }, + { .compatible = "ms5607" }, + { } +}; +MODULE_DEVICE_TABLE(of, ms5611_i2c_matches); +#endif + +static const struct i2c_device_id ms5611_id[] = { + { "ms5611", MS5611 }, + { "ms5607", MS5607 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ms5611_id); + +static struct i2c_driver ms5611_driver = { + .driver = { + .name = "ms5611", + .of_match_table = of_match_ptr(ms5611_i2c_matches) + }, + .id_table = ms5611_id, + .probe = ms5611_i2c_probe, + .remove = ms5611_i2c_remove, +}; +module_i2c_driver(ms5611_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("MS5611 i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c new file mode 100644 index 000000000..932e05001 --- /dev/null +++ b/drivers/iio/pressure/ms5611_spi.c @@ -0,0 +1,150 @@ +/* + * MS5611 pressure and temperature sensor driver (SPI bus) + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/of_device.h> + +#include "ms5611.h" + +static int ms5611_spi_reset(struct device *dev) +{ + u8 cmd = MS5611_RESET; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + return spi_write_then_read(st->client, &cmd, 1, NULL, 0); +} + +static int ms5611_spi_read_prom_word(struct device *dev, int index, u16 *word) +{ + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + ret = spi_w8r16be(st->client, MS5611_READ_PROM_WORD + (index << 1)); + if (ret < 0) + return ret; + + *word = ret; + + return 0; +} + +static int ms5611_spi_read_adc(struct device *dev, s32 *val) +{ + int ret; + u8 buf[3] = { MS5611_READ_ADC }; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + ret = spi_write_then_read(st->client, buf, 1, buf, 3); + if (ret < 0) + return ret; + + *val = (buf[0] << 16) | (buf[1] << 8) | buf[2]; + + return 0; +} + +static int ms5611_spi_read_adc_temp_and_pressure(struct device *dev, + s32 *temp, s32 *pressure) +{ + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + const struct ms5611_osr *osr = st->temp_osr; + + /* + * Warning: &osr->cmd MUST be aligned on a word boundary since used as + * 2nd argument (void*) of spi_write_then_read. + */ + ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0); + if (ret < 0) + return ret; + + usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL)); + ret = ms5611_spi_read_adc(dev, temp); + if (ret < 0) + return ret; + + osr = st->pressure_osr; + ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0); + if (ret < 0) + return ret; + + usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL)); + return ms5611_spi_read_adc(dev, pressure); +} + +static int ms5611_spi_probe(struct spi_device *spi) +{ + int ret; + struct ms5611_state *st; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + spi_set_drvdata(spi, indio_dev); + + spi->mode = SPI_MODE_0; + spi->max_speed_hz = 20000000; + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret < 0) + return ret; + + st = iio_priv(indio_dev); + st->reset = ms5611_spi_reset; + st->read_prom_word = ms5611_spi_read_prom_word; + st->read_adc_temp_and_pressure = ms5611_spi_read_adc_temp_and_pressure; + st->client = spi; + + return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name, + spi_get_device_id(spi)->driver_data); +} + +static int ms5611_spi_remove(struct spi_device *spi) +{ + return ms5611_remove(spi_get_drvdata(spi)); +} + +#if defined(CONFIG_OF) +static const struct of_device_id ms5611_spi_matches[] = { + { .compatible = "meas,ms5611" }, + { .compatible = "ms5611" }, + { .compatible = "meas,ms5607" }, + { .compatible = "ms5607" }, + { } +}; +MODULE_DEVICE_TABLE(of, ms5611_spi_matches); +#endif + +static const struct spi_device_id ms5611_id[] = { + { "ms5611", MS5611 }, + { "ms5607", MS5607 }, + { } +}; +MODULE_DEVICE_TABLE(spi, ms5611_id); + +static struct spi_driver ms5611_driver = { + .driver = { + .name = "ms5611", + .of_match_table = of_match_ptr(ms5611_spi_matches) + }, + .id_table = ms5611_id, + .probe = ms5611_spi_probe, + .remove = ms5611_spi_remove, +}; +module_spi_driver(ms5611_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("MS5611 spi driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c new file mode 100644 index 000000000..e2f73e6dc --- /dev/null +++ b/drivers/iio/pressure/ms5637.c @@ -0,0 +1,206 @@ +/* + * ms5637.c - Support for Measurement-Specialties MS5637, MS5805 + * MS5837 and MS8607 pressure & temperature sensor + * + * Copyright (c) 2015 Measurement-Specialties + * + * Licensed under the GPL-2. + * + * (7-bit I2C slave address 0x76) + * + * Datasheet: + * http://www.meas-spec.com/downloads/MS5637-02BA03.pdf + * Datasheet: + * http://www.meas-spec.com/downloads/MS5805-02BA01.pdf + * Datasheet: + * http://www.meas-spec.com/downloads/MS5837-30BA.pdf + * Datasheet: + * http://www.meas-spec.com/downloads/MS8607-02BA01.pdf + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/stat.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/mutex.h> + +#include "../common/ms_sensors/ms_sensors_i2c.h" + +static const int ms5637_samp_freq[6] = { 960, 480, 240, 120, 60, 30 }; +/* String copy of the above const for readability purpose */ +static const char ms5637_show_samp_freq[] = "960 480 240 120 60 30"; + +static int ms5637_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + int ret; + int temperature; + unsigned int pressure; + struct ms_tp_dev *dev_data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ret = ms_sensors_read_temp_and_pressure(dev_data, + &temperature, + &pressure); + if (ret) + return ret; + + switch (channel->type) { + case IIO_TEMP: /* in milli °C */ + *val = temperature; + + return IIO_VAL_INT; + case IIO_PRESSURE: /* in kPa */ + *val = pressure / 1000; + *val2 = (pressure % 1000) * 1000; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + *val = ms5637_samp_freq[dev_data->res_index]; + + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ms5637_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ms_tp_dev *dev_data = iio_priv(indio_dev); + int i; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + i = ARRAY_SIZE(ms5637_samp_freq); + while (i-- > 0) + if (val == ms5637_samp_freq[i]) + break; + if (i < 0) + return -EINVAL; + dev_data->res_index = i; + + return 0; + default: + return -EINVAL; + } +} + +static const struct iio_chan_spec ms5637_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + } +}; + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(ms5637_show_samp_freq); + +static struct attribute *ms5637_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ms5637_attribute_group = { + .attrs = ms5637_attributes, +}; + +static const struct iio_info ms5637_info = { + .read_raw = ms5637_read_raw, + .write_raw = ms5637_write_raw, + .attrs = &ms5637_attribute_group, +}; + +static int ms5637_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ms_tp_dev *dev_data; + struct iio_dev *indio_dev; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + dev_err(&client->dev, + "Adapter does not support some i2c transaction\n"); + return -EOPNOTSUPP; + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); + if (!indio_dev) + return -ENOMEM; + + dev_data = iio_priv(indio_dev); + dev_data->client = client; + dev_data->res_index = 5; + mutex_init(&dev_data->lock); + + indio_dev->info = &ms5637_info; + indio_dev->name = id->name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ms5637_channels; + indio_dev->num_channels = ARRAY_SIZE(ms5637_channels); + + i2c_set_clientdata(client, indio_dev); + + ret = ms_sensors_reset(client, 0x1E, 3000); + if (ret) + return ret; + + ret = ms_sensors_tp_read_prom(dev_data); + if (ret) + return ret; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id ms5637_id[] = { + {"ms5637", 0}, + {"ms5805", 0}, + {"ms5837", 0}, + {"ms8607-temppressure", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ms5637_id); + +static const struct of_device_id ms5637_of_match[] = { + { .compatible = "meas,ms5637", }, + { .compatible = "meas,ms5805", }, + { .compatible = "meas,ms5837", }, + { .compatible = "meas,ms8607-temppressure", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ms5637_of_match); + +static struct i2c_driver ms5637_driver = { + .probe = ms5637_probe, + .id_table = ms5637_id, + .driver = { + .name = "ms5637", + .of_match_table = of_match_ptr(ms5637_of_match), + }, +}; + +module_i2c_driver(ms5637_driver); + +MODULE_DESCRIPTION("Measurement-Specialties ms5637 temperature & pressure driver"); +MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>"); +MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@maplehightech.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h new file mode 100644 index 000000000..e67eb0d97 --- /dev/null +++ b/drivers/iio/pressure/st_pressure.h @@ -0,0 +1,62 @@ +/* + * STMicroelectronics pressures driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * v. 1.0.0 + * Licensed under the GPL-2. + */ + +#ifndef ST_PRESS_H +#define ST_PRESS_H + +#include <linux/types.h> +#include <linux/iio/common/st_sensors.h> + +enum st_press_type { + LPS001WP, + LPS25H, + LPS331AP, + LPS22HB, + LPS33HW, + LPS35HW, + ST_PRESS_MAX, +}; + +#define LPS001WP_PRESS_DEV_NAME "lps001wp" +#define LPS25H_PRESS_DEV_NAME "lps25h" +#define LPS331AP_PRESS_DEV_NAME "lps331ap" +#define LPS22HB_PRESS_DEV_NAME "lps22hb" +#define LPS33HW_PRESS_DEV_NAME "lps33hw" +#define LPS35HW_PRESS_DEV_NAME "lps35hw" + +/** + * struct st_sensors_platform_data - default press platform data + * @drdy_int_pin: default press DRDY is available on INT1 pin. + */ +static const struct st_sensors_platform_data default_press_pdata = { + .drdy_int_pin = 1, +}; + +int st_press_common_probe(struct iio_dev *indio_dev); +void st_press_common_remove(struct iio_dev *indio_dev); + +#ifdef CONFIG_IIO_BUFFER +int st_press_allocate_ring(struct iio_dev *indio_dev); +void st_press_deallocate_ring(struct iio_dev *indio_dev); +int st_press_trig_set_state(struct iio_trigger *trig, bool state); +#define ST_PRESS_TRIGGER_SET_STATE (&st_press_trig_set_state) +#else /* CONFIG_IIO_BUFFER */ +static inline int st_press_allocate_ring(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void st_press_deallocate_ring(struct iio_dev *indio_dev) +{ +} +#define ST_PRESS_TRIGGER_SET_STATE NULL +#endif /* CONFIG_IIO_BUFFER */ + +#endif /* ST_PRESS_H */ diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c new file mode 100644 index 000000000..99468d0a6 --- /dev/null +++ b/drivers/iio/pressure/st_pressure_buffer.c @@ -0,0 +1,96 @@ +/* + * STMicroelectronics pressures driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_pressure.h" + +int st_press_trig_set_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + + return st_sensors_set_dataready_irq(indio_dev, state); +} + +static int st_press_buffer_preenable(struct iio_dev *indio_dev) +{ + return st_sensors_set_enable(indio_dev, true); +} + +static int st_press_buffer_postenable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *press_data = iio_priv(indio_dev); + + press_data->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (press_data->buffer_data == NULL) { + err = -ENOMEM; + goto allocate_memory_error; + } + + err = iio_triggered_buffer_postenable(indio_dev); + if (err < 0) + goto st_press_buffer_postenable_error; + + return err; + +st_press_buffer_postenable_error: + kfree(press_data->buffer_data); +allocate_memory_error: + return err; +} + +static int st_press_buffer_predisable(struct iio_dev *indio_dev) +{ + int err; + struct st_sensor_data *press_data = iio_priv(indio_dev); + + err = iio_triggered_buffer_predisable(indio_dev); + if (err < 0) + goto st_press_buffer_predisable_error; + + err = st_sensors_set_enable(indio_dev, false); + +st_press_buffer_predisable_error: + kfree(press_data->buffer_data); + return err; +} + +static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = { + .preenable = &st_press_buffer_preenable, + .postenable = &st_press_buffer_postenable, + .predisable = &st_press_buffer_predisable, +}; + +int st_press_allocate_ring(struct iio_dev *indio_dev) +{ + return iio_triggered_buffer_setup(indio_dev, NULL, + &st_sensors_trigger_handler, &st_press_buffer_setup_ops); +} + +void st_press_deallocate_ring(struct iio_dev *indio_dev) +{ + iio_triggered_buffer_cleanup(indio_dev); +} + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics pressures buffer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c new file mode 100644 index 000000000..4ddb6cf7d --- /dev/null +++ b/drivers/iio/pressure/st_pressure_core.c @@ -0,0 +1,695 @@ +/* + * STMicroelectronics pressures driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/buffer.h> +#include <asm/unaligned.h> + +#include <linux/iio/common/st_sensors.h> +#include "st_pressure.h" + +/* + * About determining pressure scaling factors + * ------------------------------------------ + * + * Datasheets specify typical pressure sensitivity so that pressure is computed + * according to the following equation : + * pressure[mBar] = raw / sensitivity + * where : + * raw the 24 bits long raw sampled pressure + * sensitivity a scaling factor specified by the datasheet in LSB/mBar + * + * IIO ABI expects pressure to be expressed as kPascal, hence pressure should be + * computed according to : + * pressure[kPascal] = pressure[mBar] / 10 + * = raw / (sensitivity * 10) (1) + * + * Finally, st_press_read_raw() returns pressure scaling factor as an + * IIO_VAL_INT_PLUS_NANO with a zero integral part and "gain" as decimal part. + * Therefore, from (1), "gain" becomes : + * gain = 10^9 / (sensitivity * 10) + * = 10^8 / sensitivity + * + * About determining temperature scaling factors and offsets + * --------------------------------------------------------- + * + * Datasheets specify typical temperature sensitivity and offset so that + * temperature is computed according to the following equation : + * temp[Celsius] = offset[Celsius] + (raw / sensitivity) + * where : + * raw the 16 bits long raw sampled temperature + * offset a constant specified by the datasheet in degree Celsius + * (sometimes zero) + * sensitivity a scaling factor specified by the datasheet in LSB/Celsius + * + * IIO ABI expects temperature to be expressed as milli degree Celsius such as + * user space should compute temperature according to : + * temp[mCelsius] = temp[Celsius] * 10^3 + * = (offset[Celsius] + (raw / sensitivity)) * 10^3 + * = ((offset[Celsius] * sensitivity) + raw) * + * (10^3 / sensitivity) (2) + * + * IIO ABI expects user space to apply offset and scaling factors to raw samples + * according to : + * temp[mCelsius] = (OFFSET + raw) * SCALE + * where : + * OFFSET an arbitrary constant exposed by device + * SCALE an arbitrary scaling factor exposed by device + * + * Matching OFFSET and SCALE with members of (2) gives : + * OFFSET = offset[Celsius] * sensitivity (3) + * SCALE = 10^3 / sensitivity (4) + * + * st_press_read_raw() returns temperature scaling factor as an + * IIO_VAL_FRACTIONAL with a 10^3 numerator and "gain2" as denominator. + * Therefore, from (3), "gain2" becomes : + * gain2 = sensitivity + * + * When declared within channel, i.e. for a non zero specified offset, + * st_press_read_raw() will return the latter as an IIO_VAL_FRACTIONAL such as : + * numerator = OFFSET * 10^3 + * denominator = 10^3 + * giving from (4): + * numerator = offset[Celsius] * 10^3 * sensitivity + * = offset[mCelsius] * gain2 + */ + +#define MCELSIUS_PER_CELSIUS 1000 + +/* Default pressure sensitivity */ +#define ST_PRESS_LSB_PER_MBAR 4096UL +#define ST_PRESS_KPASCAL_NANO_SCALE (100000000UL / \ + ST_PRESS_LSB_PER_MBAR) + +/* Default temperature sensitivity */ +#define ST_PRESS_LSB_PER_CELSIUS 480UL +#define ST_PRESS_MILLI_CELSIUS_OFFSET 42500UL + +/* FULLSCALE */ +#define ST_PRESS_FS_AVL_1100MB 1100 +#define ST_PRESS_FS_AVL_1260MB 1260 + +#define ST_PRESS_1_OUT_XL_ADDR 0x28 +#define ST_TEMP_1_OUT_L_ADDR 0x2b + +/* LPS001WP pressure resolution */ +#define ST_PRESS_LPS001WP_LSB_PER_MBAR 16UL +/* LPS001WP temperature resolution */ +#define ST_PRESS_LPS001WP_LSB_PER_CELSIUS 64UL +/* LPS001WP pressure gain */ +#define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \ + (100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR) +/* LPS001WP pressure and temp L addresses */ +#define ST_PRESS_LPS001WP_OUT_L_ADDR 0x28 +#define ST_TEMP_LPS001WP_OUT_L_ADDR 0x2a + +/* LPS25H pressure and temp L addresses */ +#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 +#define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b + +/* LPS22HB temperature sensitivity */ +#define ST_PRESS_LPS22HB_LSB_PER_CELSIUS 100UL + +static const struct iio_chan_spec st_press_1_channels[] = { + { + .type = IIO_PRESSURE, + .address = ST_PRESS_1_OUT_XL_ADDR, + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_LE, + }, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + { + .type = IIO_TEMP, + .address = ST_TEMP_1_OUT_L_ADDR, + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_LE, + }, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + IIO_CHAN_SOFT_TIMESTAMP(2) +}; + +static const struct iio_chan_spec st_press_lps001wp_channels[] = { + { + .type = IIO_PRESSURE, + .address = ST_PRESS_LPS001WP_OUT_L_ADDR, + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_LE, + }, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .address = ST_TEMP_LPS001WP_OUT_L_ADDR, + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_LE, + }, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + }, + IIO_CHAN_SOFT_TIMESTAMP(2) +}; + +static const struct iio_chan_spec st_press_lps22hb_channels[] = { + { + .type = IIO_PRESSURE, + .address = ST_PRESS_1_OUT_XL_ADDR, + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_LE, + }, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + { + .type = IIO_TEMP, + .address = ST_TEMP_1_OUT_L_ADDR, + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_LE, + }, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + IIO_CHAN_SOFT_TIMESTAMP(2) +}; + +static const struct st_sensor_settings st_press_sensors_settings[] = { + { + /* + * CUSTOM VALUES FOR LPS331AP SENSOR + * See LPS331AP datasheet: + * http://www2.st.com/resource/en/datasheet/lps331ap.pdf + */ + .wai = 0xbb, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LPS331AP_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_1_channels, + .num_ch = ARRAY_SIZE(st_press_1_channels), + .odr = { + .addr = 0x20, + .mask = 0x70, + .odr_avl = { + { .hz = 1, .value = 0x01 }, + { .hz = 7, .value = 0x05 }, + { .hz = 13, .value = 0x06 }, + { .hz = 25, .value = 0x07 }, + }, + }, + .pw = { + .addr = 0x20, + .mask = 0x80, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .addr = 0x23, + .mask = 0x30, + .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS331AP datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1260MB, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LSB_PER_CELSIUS, + }, + }, + }, + .bdu = { + .addr = 0x20, + .mask = 0x04, + }, + .drdy_irq = { + .int1 = { + .addr = 0x22, + .mask = 0x04, + .addr_od = 0x22, + .mask_od = 0x40, + }, + .int2 = { + .addr = 0x22, + .mask = 0x20, + .addr_od = 0x22, + .mask_od = 0x40, + }, + .addr_ihl = 0x22, + .mask_ihl = 0x80, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, + }, + .sim = { + .addr = 0x20, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, + { + /* + * CUSTOM VALUES FOR LPS001WP SENSOR + */ + .wai = 0xba, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LPS001WP_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_lps001wp_channels, + .num_ch = ARRAY_SIZE(st_press_lps001wp_channels), + .odr = { + .addr = 0x20, + .mask = 0x30, + .odr_avl = { + { .hz = 1, .value = 0x01 }, + { .hz = 7, .value = 0x02 }, + { .hz = 13, .value = 0x03 }, + }, + }, + .pw = { + .addr = 0x20, + .mask = 0x40, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .fs_avl = { + /* + * Pressure and temperature resolution values + * as defined in table 3 of LPS001WP datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1100MB, + .gain = ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN, + .gain2 = ST_PRESS_LPS001WP_LSB_PER_CELSIUS, + }, + }, + }, + .bdu = { + .addr = 0x20, + .mask = 0x04, + }, + .sim = { + .addr = 0x20, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, + { + /* + * CUSTOM VALUES FOR LPS25H SENSOR + * See LPS25H datasheet: + * http://www2.st.com/resource/en/datasheet/lps25h.pdf + */ + .wai = 0xbd, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LPS25H_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_1_channels, + .num_ch = ARRAY_SIZE(st_press_1_channels), + .odr = { + .addr = 0x20, + .mask = 0x70, + .odr_avl = { + { .hz = 1, .value = 0x01 }, + { .hz = 7, .value = 0x02 }, + { .hz = 13, .value = 0x03 }, + { .hz = 25, .value = 0x04 }, + }, + }, + .pw = { + .addr = 0x20, + .mask = 0x80, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS25H datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1260MB, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LSB_PER_CELSIUS, + }, + }, + }, + .bdu = { + .addr = 0x20, + .mask = 0x04, + }, + .drdy_irq = { + .int1 = { + .addr = 0x23, + .mask = 0x01, + .addr_od = 0x22, + .mask_od = 0x40, + }, + .addr_ihl = 0x22, + .mask_ihl = 0x80, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, + }, + .sim = { + .addr = 0x20, + .value = BIT(0), + }, + .multi_read_bit = true, + .bootime = 2, + }, + { + /* + * CUSTOM VALUES FOR LPS22HB SENSOR + * See LPS22HB datasheet: + * http://www2.st.com/resource/en/datasheet/lps22hb.pdf + */ + .wai = 0xb1, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LPS22HB_PRESS_DEV_NAME, + [1] = LPS33HW_PRESS_DEV_NAME, + [2] = LPS35HW_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_lps22hb_channels, + .num_ch = ARRAY_SIZE(st_press_lps22hb_channels), + .odr = { + .addr = 0x10, + .mask = 0x70, + .odr_avl = { + { .hz = 1, .value = 0x01 }, + { .hz = 10, .value = 0x02 }, + { .hz = 25, .value = 0x03 }, + { .hz = 50, .value = 0x04 }, + { .hz = 75, .value = 0x05 }, + }, + }, + .pw = { + .addr = 0x10, + .mask = 0x70, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS22HB datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1260MB, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS, + }, + }, + }, + .bdu = { + .addr = 0x10, + .mask = 0x02, + }, + .drdy_irq = { + .int1 = { + .addr = 0x12, + .mask = 0x04, + .addr_od = 0x12, + .mask_od = 0x40, + }, + .addr_ihl = 0x12, + .mask_ihl = 0x80, + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, + }, + .sim = { + .addr = 0x10, + .value = BIT(0), + }, + .multi_read_bit = false, + .bootime = 2, + }, +}; + +static int st_press_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, + int val, + int val2, + long mask) +{ + int err; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + if (val2) + return -EINVAL; + mutex_lock(&indio_dev->mlock); + err = st_sensors_set_odr(indio_dev, val); + mutex_unlock(&indio_dev->mlock); + return err; + default: + return -EINVAL; + } +} + +static int st_press_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val, + int *val2, long mask) +{ + int err; + struct st_sensor_data *press_data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = st_sensors_read_info_raw(indio_dev, ch, val); + if (err < 0) + goto read_error; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + switch (ch->type) { + case IIO_PRESSURE: + *val = 0; + *val2 = press_data->current_fullscale->gain; + return IIO_VAL_INT_PLUS_NANO; + case IIO_TEMP: + *val = MCELSIUS_PER_CELSIUS; + *val2 = press_data->current_fullscale->gain2; + return IIO_VAL_FRACTIONAL; + default: + err = -EINVAL; + goto read_error; + } + + case IIO_CHAN_INFO_OFFSET: + switch (ch->type) { + case IIO_TEMP: + *val = ST_PRESS_MILLI_CELSIUS_OFFSET * + press_data->current_fullscale->gain2; + *val2 = MCELSIUS_PER_CELSIUS; + break; + default: + err = -EINVAL; + goto read_error; + } + + return IIO_VAL_FRACTIONAL; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = press_data->odr; + return IIO_VAL_INT; + default: + return -EINVAL; + } + +read_error: + return err; +} + +static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); + +static struct attribute *st_press_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_press_attribute_group = { + .attrs = st_press_attributes, +}; + +static const struct iio_info press_info = { + .attrs = &st_press_attribute_group, + .read_raw = &st_press_read_raw, + .write_raw = &st_press_write_raw, + .debugfs_reg_access = &st_sensors_debugfs_reg_access, +}; + +#ifdef CONFIG_IIO_TRIGGER +static const struct iio_trigger_ops st_press_trigger_ops = { + .set_trigger_state = ST_PRESS_TRIGGER_SET_STATE, + .validate_device = st_sensors_validate_device, +}; +#define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops) +#else +#define ST_PRESS_TRIGGER_OPS NULL +#endif + +int st_press_common_probe(struct iio_dev *indio_dev) +{ + struct st_sensor_data *press_data = iio_priv(indio_dev); + struct st_sensors_platform_data *pdata = + (struct st_sensors_platform_data *)press_data->dev->platform_data; + int irq = press_data->get_irq_data_ready(indio_dev); + int err; + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &press_info; + mutex_init(&press_data->tb.buf_lock); + + err = st_sensors_power_enable(indio_dev); + if (err) + return err; + + err = st_sensors_check_device_support(indio_dev, + ARRAY_SIZE(st_press_sensors_settings), + st_press_sensors_settings); + if (err < 0) + goto st_press_power_off; + + /* + * Skip timestamping channel while declaring available channels to + * common st_sensor layer. Look at st_sensors_get_buffer_element() to + * see how timestamps are explicitly pushed as last samples block + * element. + */ + press_data->num_data_channels = press_data->sensor_settings->num_ch - 1; + press_data->multiread_bit = press_data->sensor_settings->multi_read_bit; + indio_dev->channels = press_data->sensor_settings->ch; + indio_dev->num_channels = press_data->sensor_settings->num_ch; + + press_data->current_fullscale = + (struct st_sensor_fullscale_avl *) + &press_data->sensor_settings->fs.fs_avl[0]; + + press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz; + + /* Some devices don't support a data ready pin. */ + if (!pdata && (press_data->sensor_settings->drdy_irq.int1.addr || + press_data->sensor_settings->drdy_irq.int2.addr)) + pdata = (struct st_sensors_platform_data *)&default_press_pdata; + + err = st_sensors_init_sensor(indio_dev, pdata); + if (err < 0) + goto st_press_power_off; + + err = st_press_allocate_ring(indio_dev); + if (err < 0) + goto st_press_power_off; + + if (irq > 0) { + err = st_sensors_allocate_trigger(indio_dev, + ST_PRESS_TRIGGER_OPS); + if (err < 0) + goto st_press_probe_trigger_error; + } + + err = iio_device_register(indio_dev); + if (err) + goto st_press_device_register_error; + + dev_info(&indio_dev->dev, "registered pressure sensor %s\n", + indio_dev->name); + + return err; + +st_press_device_register_error: + if (irq > 0) + st_sensors_deallocate_trigger(indio_dev); +st_press_probe_trigger_error: + st_press_deallocate_ring(indio_dev); +st_press_power_off: + st_sensors_power_disable(indio_dev); + + return err; +} +EXPORT_SYMBOL(st_press_common_probe); + +void st_press_common_remove(struct iio_dev *indio_dev) +{ + struct st_sensor_data *press_data = iio_priv(indio_dev); + + st_sensors_power_disable(indio_dev); + + iio_device_unregister(indio_dev); + if (press_data->get_irq_data_ready(indio_dev) > 0) + st_sensors_deallocate_trigger(indio_dev); + + st_press_deallocate_ring(indio_dev); +} +EXPORT_SYMBOL(st_press_common_remove); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics pressures driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c new file mode 100644 index 000000000..2026a1012 --- /dev/null +++ b/drivers/iio/pressure/st_pressure_i2c.c @@ -0,0 +1,132 @@ +/* + * STMicroelectronics pressures driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_i2c.h> +#include "st_pressure.h" + +#ifdef CONFIG_OF +static const struct of_device_id st_press_of_match[] = { + { + .compatible = "st,lps001wp-press", + .data = LPS001WP_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps25h-press", + .data = LPS25H_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps331ap-press", + .data = LPS331AP_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps22hb-press", + .data = LPS22HB_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps33hw", + .data = LPS33HW_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps35hw", + .data = LPS35HW_PRESS_DEV_NAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_press_of_match); +#else +#define st_press_of_match NULL +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id st_press_acpi_match[] = { + {"SNO9210", LPS22HB}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, st_press_acpi_match); +#else +#define st_press_acpi_match NULL +#endif + +static const struct i2c_device_id st_press_id_table[] = { + { LPS001WP_PRESS_DEV_NAME, LPS001WP }, + { LPS25H_PRESS_DEV_NAME, LPS25H }, + { LPS331AP_PRESS_DEV_NAME, LPS331AP }, + { LPS22HB_PRESS_DEV_NAME, LPS22HB }, + { LPS33HW_PRESS_DEV_NAME, LPS33HW }, + { LPS35HW_PRESS_DEV_NAME, LPS35HW }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_press_id_table); + +static int st_press_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *press_data; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data)); + if (!indio_dev) + return -ENOMEM; + + press_data = iio_priv(indio_dev); + + if (client->dev.of_node) { + st_sensors_of_name_probe(&client->dev, st_press_of_match, + client->name, sizeof(client->name)); + } else if (ACPI_HANDLE(&client->dev)) { + ret = st_sensors_match_acpi_device(&client->dev); + if ((ret < 0) || (ret >= ST_PRESS_MAX)) + return -ENODEV; + + strlcpy(client->name, st_press_id_table[ret].name, + sizeof(client->name)); + } else if (!id) + return -ENODEV; + + st_sensors_i2c_configure(indio_dev, client, press_data); + + ret = st_press_common_probe(indio_dev); + if (ret < 0) + return ret; + + return 0; +} + +static int st_press_i2c_remove(struct i2c_client *client) +{ + st_press_common_remove(i2c_get_clientdata(client)); + + return 0; +} + +static struct i2c_driver st_press_driver = { + .driver = { + .name = "st-press-i2c", + .of_match_table = of_match_ptr(st_press_of_match), + .acpi_match_table = ACPI_PTR(st_press_acpi_match), + }, + .probe = st_press_i2c_probe, + .remove = st_press_i2c_remove, + .id_table = st_press_id_table, +}; +module_i2c_driver(st_press_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics pressures i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c new file mode 100644 index 000000000..9a3441b12 --- /dev/null +++ b/drivers/iio/pressure/st_pressure_spi.c @@ -0,0 +1,113 @@ +/* + * STMicroelectronics pressures driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> + +#include <linux/iio/common/st_sensors.h> +#include <linux/iio/common/st_sensors_spi.h> +#include "st_pressure.h" + +#ifdef CONFIG_OF +/* + * For new single-chip sensors use <device_name> as compatible string. + * For old single-chip devices keep <device_name>-press to maintain + * compatibility + */ +static const struct of_device_id st_press_of_match[] = { + { + .compatible = "st,lps001wp-press", + .data = LPS001WP_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps25h-press", + .data = LPS25H_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps331ap-press", + .data = LPS331AP_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps22hb-press", + .data = LPS22HB_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps33hw", + .data = LPS33HW_PRESS_DEV_NAME, + }, + { + .compatible = "st,lps35hw", + .data = LPS35HW_PRESS_DEV_NAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_press_of_match); +#else +#define st_press_of_match NULL +#endif + +static int st_press_spi_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct st_sensor_data *press_data; + int err; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*press_data)); + if (indio_dev == NULL) + return -ENOMEM; + + press_data = iio_priv(indio_dev); + + st_sensors_of_name_probe(&spi->dev, st_press_of_match, + spi->modalias, sizeof(spi->modalias)); + st_sensors_spi_configure(indio_dev, spi, press_data); + + err = st_press_common_probe(indio_dev); + if (err < 0) + return err; + + return 0; +} + +static int st_press_spi_remove(struct spi_device *spi) +{ + st_press_common_remove(spi_get_drvdata(spi)); + + return 0; +} + +static const struct spi_device_id st_press_id_table[] = { + { LPS001WP_PRESS_DEV_NAME }, + { LPS25H_PRESS_DEV_NAME }, + { LPS331AP_PRESS_DEV_NAME }, + { LPS22HB_PRESS_DEV_NAME }, + { LPS33HW_PRESS_DEV_NAME }, + { LPS35HW_PRESS_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_press_id_table); + +static struct spi_driver st_press_driver = { + .driver = { + .name = "st-press-spi", + .of_match_table = of_match_ptr(st_press_of_match), + }, + .probe = st_press_spi_probe, + .remove = st_press_spi_remove, + .id_table = st_press_id_table, +}; +module_spi_driver(st_press_driver); + +MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics pressures spi driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c new file mode 100644 index 000000000..92c00f603 --- /dev/null +++ b/drivers/iio/pressure/t5403.c @@ -0,0 +1,274 @@ +/* + * t5403.c - Support for EPCOS T5403 pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x77) + * + * TODO: end-of-conversion irq + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/delay.h> + +#define T5403_DATA 0xf5 /* data, LSB first, 16 bit */ +#define T5403_CALIB_DATA 0x8e /* 10 calibration coeff., LSB first, 16 bit */ +#define T5403_SLAVE_ADDR 0x88 /* I2C slave address, 0x77 */ +#define T5403_COMMAND 0xf1 + +/* command bits */ +#define T5403_MODE_SHIFT 3 /* conversion time: 2, 8, 16, 66 ms */ +#define T5403_PT BIT(1) /* 0 .. pressure, 1 .. temperature measurement */ +#define T5403_SCO BIT(0) /* start conversion */ + +#define T5403_MODE_LOW 0 +#define T5403_MODE_STANDARD 1 +#define T5403_MODE_HIGH 2 +#define T5403_MODE_ULTRA_HIGH 3 + +#define T5403_I2C_MASK (~BIT(7)) +#define T5403_I2C_ADDR 0x77 + +static const int t5403_pressure_conv_ms[] = {2, 8, 16, 66}; + +struct t5403_data { + struct i2c_client *client; + struct mutex lock; + int mode; + __le16 c[10]; +}; + +#define T5403_C_U16(i) le16_to_cpu(data->c[(i) - 1]) +#define T5403_C(i) sign_extend32(T5403_C_U16(i), 15) + +static int t5403_read(struct t5403_data *data, bool pressure) +{ + int wait_time = 3; /* wakeup time in ms */ + + int ret = i2c_smbus_write_byte_data(data->client, T5403_COMMAND, + (pressure ? (data->mode << T5403_MODE_SHIFT) : T5403_PT) | + T5403_SCO); + if (ret < 0) + return ret; + + wait_time += pressure ? t5403_pressure_conv_ms[data->mode] : 2; + + msleep(wait_time); + + return i2c_smbus_read_word_data(data->client, T5403_DATA); +} + +static int t5403_comp_pressure(struct t5403_data *data, int *val, int *val2) +{ + int ret; + s16 t_r; + u16 p_r; + s32 S, O, X; + + mutex_lock(&data->lock); + + ret = t5403_read(data, false); + if (ret < 0) + goto done; + t_r = ret; + + ret = t5403_read(data, true); + if (ret < 0) + goto done; + p_r = ret; + + /* see EPCOS application note */ + S = T5403_C_U16(3) + (s32) T5403_C_U16(4) * t_r / 0x20000 + + T5403_C(5) * t_r / 0x8000 * t_r / 0x80000 + + T5403_C(9) * t_r / 0x8000 * t_r / 0x8000 * t_r / 0x10000; + + O = T5403_C(6) * 0x4000 + T5403_C(7) * t_r / 8 + + T5403_C(8) * t_r / 0x8000 * t_r / 16 + + T5403_C(9) * t_r / 0x8000 * t_r / 0x10000 * t_r; + + X = (S * p_r + O) / 0x4000; + + X += ((X - 75000) * (X - 75000) / 0x10000 - 9537) * + T5403_C(10) / 0x10000; + + *val = X / 1000; + *val2 = (X % 1000) * 1000; + +done: + mutex_unlock(&data->lock); + return ret; +} + +static int t5403_comp_temp(struct t5403_data *data, int *val) +{ + int ret; + s16 t_r; + + mutex_lock(&data->lock); + ret = t5403_read(data, false); + if (ret < 0) + goto done; + t_r = ret; + + /* see EPCOS application note */ + *val = ((s32) T5403_C_U16(1) * t_r / 0x100 + + (s32) T5403_C_U16(2) * 0x40) * 1000 / 0x10000; + +done: + mutex_unlock(&data->lock); + return ret; +} + +static int t5403_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct t5403_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_PRESSURE: + ret = t5403_comp_pressure(data, val, val2); + if (ret < 0) + return ret; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + ret = t5403_comp_temp(data, val); + if (ret < 0) + return ret; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = t5403_pressure_conv_ms[data->mode] * 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int t5403_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct t5403_data *data = iio_priv(indio_dev); + int i; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + if (val != 0) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(t5403_pressure_conv_ms); i++) + if (val2 == t5403_pressure_conv_ms[i] * 1000) { + mutex_lock(&data->lock); + data->mode = i; + mutex_unlock(&data->lock); + return 0; + } + return -EINVAL; + default: + return -EINVAL; + } +} + +static const struct iio_chan_spec t5403_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_INT_TIME), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, +}; + +static IIO_CONST_ATTR_INT_TIME_AVAIL("0.002 0.008 0.016 0.066"); + +static struct attribute *t5403_attributes[] = { + &iio_const_attr_integration_time_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group t5403_attribute_group = { + .attrs = t5403_attributes, +}; + +static const struct iio_info t5403_info = { + .read_raw = &t5403_read_raw, + .write_raw = &t5403_write_raw, + .attrs = &t5403_attribute_group, +}; + +static int t5403_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct t5403_data *data; + struct iio_dev *indio_dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) + return -EOPNOTSUPP; + + ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR); + if (ret < 0) + return ret; + if ((ret & T5403_I2C_MASK) != T5403_I2C_ADDR) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->lock); + + i2c_set_clientdata(client, indio_dev); + indio_dev->info = &t5403_info; + indio_dev->name = id->name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = t5403_channels; + indio_dev->num_channels = ARRAY_SIZE(t5403_channels); + + data->mode = T5403_MODE_STANDARD; + + ret = i2c_smbus_read_i2c_block_data(data->client, T5403_CALIB_DATA, + sizeof(data->c), (u8 *) data->c); + if (ret < 0) + return ret; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id t5403_id[] = { + { "t5403", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, t5403_id); + +static struct i2c_driver t5403_driver = { + .driver = { + .name = "t5403", + }, + .probe = t5403_probe, + .id_table = t5403_id, +}; +module_i2c_driver(t5403_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("EPCOS T5403 pressure/temperature sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c new file mode 100644 index 000000000..23b4fa81e --- /dev/null +++ b/drivers/iio/pressure/zpa2326.c @@ -0,0 +1,1731 @@ +/* + * Murata ZPA2326 pressure and temperature sensor IIO driver + * + * Copyright (c) 2016 Parrot S.A. + * + * Author: Gregor Boirie <gregor.boirie@parrot.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +/** + * DOC: ZPA2326 theory of operations + * + * This driver supports %INDIO_DIRECT_MODE and %INDIO_BUFFER_TRIGGERED IIO + * modes. + * A internal hardware trigger is also implemented to dispatch registered IIO + * trigger consumers upon "sample ready" interrupts. + * + * ZPA2326 hardware supports 2 sampling mode: one shot and continuous. + * + * A complete one shot sampling cycle gets device out of low power mode, + * performs pressure and temperature measurements, then automatically switches + * back to low power mode. It is meant for on demand sampling with optimal power + * saving at the cost of lower sampling rate and higher software overhead. + * This is a natural candidate for IIO read_raw hook implementation + * (%INDIO_DIRECT_MODE). It is also used for triggered buffering support to + * ensure explicit synchronization with external trigger events + * (%INDIO_BUFFER_TRIGGERED). + * + * The continuous mode works according to a periodic hardware measurement + * process continuously pushing samples into an internal hardware FIFO (for + * pressure samples only). Measurement cycle completion may be signaled by a + * "sample ready" interrupt. + * Typical software sequence of operations : + * - get device out of low power mode, + * - setup hardware sampling period, + * - at end of period, upon data ready interrupt: pop pressure samples out of + * hardware FIFO and fetch temperature sample + * - when no longer needed, stop sampling process by putting device into + * low power mode. + * This mode is used to implement %INDIO_BUFFER_TRIGGERED mode if device tree + * declares a valid interrupt line. In this case, the internal hardware trigger + * drives acquisition. + * + * Note that hardware sampling frequency is taken into account only when + * internal hardware trigger is attached as the highest sampling rate seems to + * be the most energy efficient. + * + * TODO: + * preset pressure threshold crossing / IIO events ; + * differential pressure sampling ; + * hardware samples averaging. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include "zpa2326.h" + +/* 200 ms should be enough for the longest conversion time in one-shot mode. */ +#define ZPA2326_CONVERSION_JIFFIES (HZ / 5) + +/* There should be a 1 ms delay (Tpup) after getting out of reset. */ +#define ZPA2326_TPUP_USEC_MIN (1000) +#define ZPA2326_TPUP_USEC_MAX (2000) + +/** + * struct zpa2326_frequency - Hardware sampling frequency descriptor + * @hz : Frequency in Hertz. + * @odr: Output Data Rate word as expected by %ZPA2326_CTRL_REG3_REG. + */ +struct zpa2326_frequency { + int hz; + u16 odr; +}; + +/* + * Keep these in strict ascending order: last array entry is expected to + * correspond to the highest sampling frequency. + */ +static const struct zpa2326_frequency zpa2326_sampling_frequencies[] = { + { .hz = 1, .odr = 1 << ZPA2326_CTRL_REG3_ODR_SHIFT }, + { .hz = 5, .odr = 5 << ZPA2326_CTRL_REG3_ODR_SHIFT }, + { .hz = 11, .odr = 6 << ZPA2326_CTRL_REG3_ODR_SHIFT }, + { .hz = 23, .odr = 7 << ZPA2326_CTRL_REG3_ODR_SHIFT }, +}; + +/* Return the highest hardware sampling frequency available. */ +static const struct zpa2326_frequency *zpa2326_highest_frequency(void) +{ + return &zpa2326_sampling_frequencies[ + ARRAY_SIZE(zpa2326_sampling_frequencies) - 1]; +} + +/** + * struct zpa_private - Per-device internal private state + * @timestamp: Buffered samples ready datum. + * @regmap: Underlying I2C / SPI bus adapter used to abstract slave register + * accesses. + * @result: Allows sampling logic to get completion status of operations + * that interrupt handlers perform asynchronously. + * @data_ready: Interrupt handler uses this to wake user context up at sampling + * operation completion. + * @trigger: Optional hardware / interrupt driven trigger used to notify + * external devices a new sample is ready. + * @waken: Flag indicating whether or not device has just been powered on. + * @irq: Optional interrupt line: negative or zero if not declared into + * DT, in which case sampling logic keeps polling status register + * to detect completion. + * @frequency: Current hardware sampling frequency. + * @vref: Power / voltage reference. + * @vdd: Power supply. + */ +struct zpa2326_private { + s64 timestamp; + struct regmap *regmap; + int result; + struct completion data_ready; + struct iio_trigger *trigger; + bool waken; + int irq; + const struct zpa2326_frequency *frequency; + struct regulator *vref; + struct regulator *vdd; +}; + +#define zpa2326_err(idev, fmt, ...) \ + dev_err(idev->dev.parent, fmt "\n", ##__VA_ARGS__) + +#define zpa2326_warn(idev, fmt, ...) \ + dev_warn(idev->dev.parent, fmt "\n", ##__VA_ARGS__) + +#define zpa2326_dbg(idev, fmt, ...) \ + dev_dbg(idev->dev.parent, fmt "\n", ##__VA_ARGS__) + +bool zpa2326_isreg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ZPA2326_REF_P_XL_REG: + case ZPA2326_REF_P_L_REG: + case ZPA2326_REF_P_H_REG: + case ZPA2326_RES_CONF_REG: + case ZPA2326_CTRL_REG0_REG: + case ZPA2326_CTRL_REG1_REG: + case ZPA2326_CTRL_REG2_REG: + case ZPA2326_CTRL_REG3_REG: + case ZPA2326_THS_P_LOW_REG: + case ZPA2326_THS_P_HIGH_REG: + return true; + + default: + return false; + } +} +EXPORT_SYMBOL_GPL(zpa2326_isreg_writeable); + +bool zpa2326_isreg_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ZPA2326_REF_P_XL_REG: + case ZPA2326_REF_P_L_REG: + case ZPA2326_REF_P_H_REG: + case ZPA2326_DEVICE_ID_REG: + case ZPA2326_RES_CONF_REG: + case ZPA2326_CTRL_REG0_REG: + case ZPA2326_CTRL_REG1_REG: + case ZPA2326_CTRL_REG2_REG: + case ZPA2326_CTRL_REG3_REG: + case ZPA2326_INT_SOURCE_REG: + case ZPA2326_THS_P_LOW_REG: + case ZPA2326_THS_P_HIGH_REG: + case ZPA2326_STATUS_REG: + case ZPA2326_PRESS_OUT_XL_REG: + case ZPA2326_PRESS_OUT_L_REG: + case ZPA2326_PRESS_OUT_H_REG: + case ZPA2326_TEMP_OUT_L_REG: + case ZPA2326_TEMP_OUT_H_REG: + return true; + + default: + return false; + } +} +EXPORT_SYMBOL_GPL(zpa2326_isreg_readable); + +bool zpa2326_isreg_precious(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ZPA2326_INT_SOURCE_REG: + case ZPA2326_PRESS_OUT_H_REG: + return true; + + default: + return false; + } +} +EXPORT_SYMBOL_GPL(zpa2326_isreg_precious); + +/** + * zpa2326_enable_device() - Enable device, i.e. get out of low power mode. + * @indio_dev: The IIO device associated with the hardware to enable. + * + * Required to access complete register space and to perform any sampling + * or control operations. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_enable_device(const struct iio_dev *indio_dev) +{ + int err; + + err = regmap_write(((struct zpa2326_private *) + iio_priv(indio_dev))->regmap, + ZPA2326_CTRL_REG0_REG, ZPA2326_CTRL_REG0_ENABLE); + if (err) { + zpa2326_err(indio_dev, "failed to enable device (%d)", err); + return err; + } + + zpa2326_dbg(indio_dev, "enabled"); + + return 0; +} + +/** + * zpa2326_sleep() - Disable device, i.e. switch to low power mode. + * @indio_dev: The IIO device associated with the hardware to disable. + * + * Only %ZPA2326_DEVICE_ID_REG and %ZPA2326_CTRL_REG0_REG registers may be + * accessed once device is in the disabled state. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_sleep(const struct iio_dev *indio_dev) +{ + int err; + + err = regmap_write(((struct zpa2326_private *) + iio_priv(indio_dev))->regmap, + ZPA2326_CTRL_REG0_REG, 0); + if (err) { + zpa2326_err(indio_dev, "failed to sleep (%d)", err); + return err; + } + + zpa2326_dbg(indio_dev, "sleeping"); + + return 0; +} + +/** + * zpa2326_reset_device() - Reset device to default hardware state. + * @indio_dev: The IIO device associated with the hardware to reset. + * + * Disable sampling and empty hardware FIFO. + * Device must be enabled before reset, i.e. not in low power mode. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_reset_device(const struct iio_dev *indio_dev) +{ + int err; + + err = regmap_write(((struct zpa2326_private *) + iio_priv(indio_dev))->regmap, + ZPA2326_CTRL_REG2_REG, ZPA2326_CTRL_REG2_SWRESET); + if (err) { + zpa2326_err(indio_dev, "failed to reset device (%d)", err); + return err; + } + + usleep_range(ZPA2326_TPUP_USEC_MIN, ZPA2326_TPUP_USEC_MAX); + + zpa2326_dbg(indio_dev, "reset"); + + return 0; +} + +/** + * zpa2326_start_oneshot() - Start a single sampling cycle, i.e. in one shot + * mode. + * @indio_dev: The IIO device associated with the sampling hardware. + * + * Device must have been previously enabled and configured for one shot mode. + * Device will be switched back to low power mode at end of cycle. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_start_oneshot(const struct iio_dev *indio_dev) +{ + int err; + + err = regmap_write(((struct zpa2326_private *) + iio_priv(indio_dev))->regmap, + ZPA2326_CTRL_REG0_REG, + ZPA2326_CTRL_REG0_ENABLE | + ZPA2326_CTRL_REG0_ONE_SHOT); + if (err) { + zpa2326_err(indio_dev, "failed to start one shot cycle (%d)", + err); + return err; + } + + zpa2326_dbg(indio_dev, "one shot cycle started"); + + return 0; +} + +/** + * zpa2326_power_on() - Power on device to allow subsequent configuration. + * @indio_dev: The IIO device associated with the sampling hardware. + * @private: Internal private state related to @indio_dev. + * + * Sampling will be disabled, preventing strange things from happening in our + * back. Hardware FIFO content will be cleared. + * When successful, device will be left in the enabled state to allow further + * configuration. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_power_on(const struct iio_dev *indio_dev, + const struct zpa2326_private *private) +{ + int err; + + err = regulator_enable(private->vref); + if (err) + return err; + + err = regulator_enable(private->vdd); + if (err) + goto vref; + + zpa2326_dbg(indio_dev, "powered on"); + + err = zpa2326_enable_device(indio_dev); + if (err) + goto vdd; + + err = zpa2326_reset_device(indio_dev); + if (err) + goto sleep; + + return 0; + +sleep: + zpa2326_sleep(indio_dev); +vdd: + regulator_disable(private->vdd); +vref: + regulator_disable(private->vref); + + zpa2326_dbg(indio_dev, "powered off"); + + return err; +} + +/** + * zpa2326_power_off() - Power off device, i.e. disable attached power + * regulators. + * @indio_dev: The IIO device associated with the sampling hardware. + * @private: Internal private state related to @indio_dev. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static void zpa2326_power_off(const struct iio_dev *indio_dev, + const struct zpa2326_private *private) +{ + regulator_disable(private->vdd); + regulator_disable(private->vref); + + zpa2326_dbg(indio_dev, "powered off"); +} + +/** + * zpa2326_config_oneshot() - Setup device for one shot / on demand mode. + * @indio_dev: The IIO device associated with the sampling hardware. + * @irq: Optional interrupt line the hardware uses to notify new data + * samples are ready. Negative or zero values indicate no interrupts + * are available, meaning polling is required. + * + * Output Data Rate is configured for the highest possible rate so that + * conversion time and power consumption are reduced to a minimum. + * Note that hardware internal averaging machinery (not implemented in this + * driver) is not applicable in this mode. + * + * Device must have been previously enabled before calling + * zpa2326_config_oneshot(). + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_config_oneshot(const struct iio_dev *indio_dev, + int irq) +{ + struct regmap *regs = ((struct zpa2326_private *) + iio_priv(indio_dev))->regmap; + const struct zpa2326_frequency *freq = zpa2326_highest_frequency(); + int err; + + /* Setup highest available Output Data Rate for one shot mode. */ + err = regmap_write(regs, ZPA2326_CTRL_REG3_REG, freq->odr); + if (err) + return err; + + if (irq > 0) { + /* Request interrupt when new sample is available. */ + err = regmap_write(regs, ZPA2326_CTRL_REG1_REG, + (u8)~ZPA2326_CTRL_REG1_MASK_DATA_READY); + + if (err) { + dev_err(indio_dev->dev.parent, + "failed to setup one shot mode (%d)", err); + return err; + } + } + + zpa2326_dbg(indio_dev, "one shot mode setup @%dHz", freq->hz); + + return 0; +} + +/** + * zpa2326_clear_fifo() - Clear remaining entries in hardware FIFO. + * @indio_dev: The IIO device associated with the sampling hardware. + * @min_count: Number of samples present within hardware FIFO. + * + * @min_count argument is a hint corresponding to the known minimum number of + * samples currently living in the FIFO. This allows to reduce the number of bus + * accesses by skipping status register read operation as long as we know for + * sure there are still entries left. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_clear_fifo(const struct iio_dev *indio_dev, + unsigned int min_count) +{ + struct regmap *regs = ((struct zpa2326_private *) + iio_priv(indio_dev))->regmap; + int err; + unsigned int val; + + if (!min_count) { + /* + * No hint: read status register to determine whether FIFO is + * empty or not. + */ + err = regmap_read(regs, ZPA2326_STATUS_REG, &val); + + if (err < 0) + goto err; + + if (val & ZPA2326_STATUS_FIFO_E) + /* Fifo is empty: nothing to trash. */ + return 0; + } + + /* Clear FIFO. */ + do { + /* + * A single fetch from pressure MSB register is enough to pop + * values out of FIFO. + */ + err = regmap_read(regs, ZPA2326_PRESS_OUT_H_REG, &val); + if (err < 0) + goto err; + + if (min_count) { + /* + * We know for sure there are at least min_count entries + * left in FIFO. Skip status register read. + */ + min_count--; + continue; + } + + err = regmap_read(regs, ZPA2326_STATUS_REG, &val); + if (err < 0) + goto err; + + } while (!(val & ZPA2326_STATUS_FIFO_E)); + + zpa2326_dbg(indio_dev, "FIFO cleared"); + + return 0; + +err: + zpa2326_err(indio_dev, "failed to clear FIFO (%d)", err); + + return err; +} + +/** + * zpa2326_dequeue_pressure() - Retrieve the most recent pressure sample from + * hardware FIFO. + * @indio_dev: The IIO device associated with the sampling hardware. + * @pressure: Sampled pressure output. + * + * Note that ZPA2326 hardware FIFO stores pressure samples only. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_dequeue_pressure(const struct iio_dev *indio_dev, + u32 *pressure) +{ + struct regmap *regs = ((struct zpa2326_private *) + iio_priv(indio_dev))->regmap; + unsigned int val; + int err; + int cleared = -1; + + err = regmap_read(regs, ZPA2326_STATUS_REG, &val); + if (err < 0) + return err; + + *pressure = 0; + + if (val & ZPA2326_STATUS_P_OR) { + /* + * Fifo overrun : first sample dequeued from FIFO is the + * newest. + */ + zpa2326_warn(indio_dev, "FIFO overflow"); + + err = regmap_bulk_read(regs, ZPA2326_PRESS_OUT_XL_REG, pressure, + 3); + if (err) + return err; + +#define ZPA2326_FIFO_DEPTH (16U) + /* Hardware FIFO may hold no more than 16 pressure samples. */ + return zpa2326_clear_fifo(indio_dev, ZPA2326_FIFO_DEPTH - 1); + } + + /* + * Fifo has not overflown : retrieve newest sample. We need to pop + * values out until FIFO is empty : last fetched pressure is the newest. + * In nominal cases, we should find a single queued sample only. + */ + do { + err = regmap_bulk_read(regs, ZPA2326_PRESS_OUT_XL_REG, pressure, + 3); + if (err) + return err; + + err = regmap_read(regs, ZPA2326_STATUS_REG, &val); + if (err < 0) + return err; + + cleared++; + } while (!(val & ZPA2326_STATUS_FIFO_E)); + + if (cleared) + /* + * Samples were pushed by hardware during previous rounds but we + * didn't consume them fast enough: inform user. + */ + zpa2326_dbg(indio_dev, "cleared %d FIFO entries", cleared); + + return 0; +} + +/** + * zpa2326_fill_sample_buffer() - Enqueue new channel samples to IIO buffer. + * @indio_dev: The IIO device associated with the sampling hardware. + * @private: Internal private state related to @indio_dev. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_fill_sample_buffer(struct iio_dev *indio_dev, + const struct zpa2326_private *private) +{ + struct { + u32 pressure; + u16 temperature; + u64 timestamp; + } sample; + int err; + + if (test_bit(0, indio_dev->active_scan_mask)) { + /* Get current pressure from hardware FIFO. */ + err = zpa2326_dequeue_pressure(indio_dev, &sample.pressure); + if (err) { + zpa2326_warn(indio_dev, "failed to fetch pressure (%d)", + err); + return err; + } + } + + if (test_bit(1, indio_dev->active_scan_mask)) { + /* Get current temperature. */ + err = regmap_bulk_read(private->regmap, ZPA2326_TEMP_OUT_L_REG, + &sample.temperature, 2); + if (err) { + zpa2326_warn(indio_dev, + "failed to fetch temperature (%d)", err); + return err; + } + } + + /* + * Now push samples using timestamp stored either : + * - by hardware interrupt handler if interrupt is available: see + * zpa2326_handle_irq(), + * - or oneshot completion polling machinery : see + * zpa2326_trigger_handler(). + */ + zpa2326_dbg(indio_dev, "filling raw samples buffer"); + + iio_push_to_buffers_with_timestamp(indio_dev, &sample, + private->timestamp); + + return 0; +} + +#ifdef CONFIG_PM +static int zpa2326_runtime_suspend(struct device *parent) +{ + const struct iio_dev *indio_dev = dev_get_drvdata(parent); + + if (pm_runtime_autosuspend_expiration(parent)) + /* Userspace changed autosuspend delay. */ + return -EAGAIN; + + zpa2326_power_off(indio_dev, iio_priv(indio_dev)); + + return 0; +} + +static int zpa2326_runtime_resume(struct device *parent) +{ + const struct iio_dev *indio_dev = dev_get_drvdata(parent); + + return zpa2326_power_on(indio_dev, iio_priv(indio_dev)); +} + +const struct dev_pm_ops zpa2326_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(zpa2326_runtime_suspend, zpa2326_runtime_resume, + NULL) +}; +EXPORT_SYMBOL_GPL(zpa2326_pm_ops); + +/** + * zpa2326_resume() - Request the PM layer to power supply the device. + * @indio_dev: The IIO device associated with the sampling hardware. + * + * Return: + * < 0 - a negative error code meaning failure ; + * 0 - success, device has just been powered up ; + * 1 - success, device was already powered. + */ +static int zpa2326_resume(const struct iio_dev *indio_dev) +{ + int err; + + err = pm_runtime_get_sync(indio_dev->dev.parent); + if (err < 0) { + pm_runtime_put(indio_dev->dev.parent); + return err; + } + + if (err > 0) { + /* + * Device was already power supplied: get it out of low power + * mode and inform caller. + */ + zpa2326_enable_device(indio_dev); + return 1; + } + + /* Inform caller device has just been brought back to life. */ + return 0; +} + +/** + * zpa2326_suspend() - Schedule a power down using autosuspend feature of PM + * layer. + * @indio_dev: The IIO device associated with the sampling hardware. + * + * Device is switched to low power mode at first to save power even when + * attached regulator is a "dummy" one. + */ +static void zpa2326_suspend(struct iio_dev *indio_dev) +{ + struct device *parent = indio_dev->dev.parent; + + zpa2326_sleep(indio_dev); + + pm_runtime_mark_last_busy(parent); + pm_runtime_put_autosuspend(parent); +} + +static void zpa2326_init_runtime(struct device *parent) +{ + pm_runtime_get_noresume(parent); + pm_runtime_set_active(parent); + pm_runtime_enable(parent); + pm_runtime_set_autosuspend_delay(parent, 1000); + pm_runtime_use_autosuspend(parent); + pm_runtime_mark_last_busy(parent); + pm_runtime_put_autosuspend(parent); +} + +static void zpa2326_fini_runtime(struct device *parent) +{ + pm_runtime_disable(parent); + pm_runtime_set_suspended(parent); +} +#else /* !CONFIG_PM */ +static int zpa2326_resume(const struct iio_dev *indio_dev) +{ + zpa2326_enable_device(indio_dev); + + return 0; +} + +static void zpa2326_suspend(struct iio_dev *indio_dev) +{ + zpa2326_sleep(indio_dev); +} + +#define zpa2326_init_runtime(_parent) +#define zpa2326_fini_runtime(_parent) +#endif /* !CONFIG_PM */ + +/** + * zpa2326_handle_irq() - Process hardware interrupts. + * @irq: Interrupt line the hardware uses to notify new data has arrived. + * @data: The IIO device associated with the sampling hardware. + * + * Timestamp buffered samples as soon as possible then schedule threaded bottom + * half. + * + * Return: Always successful. + */ +static irqreturn_t zpa2326_handle_irq(int irq, void *data) +{ + struct iio_dev *indio_dev = data; + + if (iio_buffer_enabled(indio_dev)) { + /* Timestamping needed for buffered sampling only. */ + ((struct zpa2326_private *) + iio_priv(indio_dev))->timestamp = iio_get_time_ns(indio_dev); + } + + return IRQ_WAKE_THREAD; +} + +/** + * zpa2326_handle_threaded_irq() - Interrupt bottom-half handler. + * @irq: Interrupt line the hardware uses to notify new data has arrived. + * @data: The IIO device associated with the sampling hardware. + * + * Mainly ensures interrupt is caused by a real "new sample available" + * condition. This relies upon the ability to perform blocking / sleeping bus + * accesses to slave's registers. This is why zpa2326_handle_threaded_irq() is + * called from within a thread, i.e. not called from hard interrupt context. + * + * When device is using its own internal hardware trigger in continuous sampling + * mode, data are available into hardware FIFO once interrupt has occurred. All + * we have to do is to dispatch the trigger, which in turn will fetch data and + * fill IIO buffer. + * + * When not using its own internal hardware trigger, the device has been + * configured in one-shot mode either by an external trigger or the IIO read_raw + * hook. This means one of the latter is currently waiting for sampling + * completion, in which case we must simply wake it up. + * + * See zpa2326_trigger_handler(). + * + * Return: + * %IRQ_NONE - no consistent interrupt happened ; + * %IRQ_HANDLED - there was new samples available. + */ +static irqreturn_t zpa2326_handle_threaded_irq(int irq, void *data) +{ + struct iio_dev *indio_dev = data; + struct zpa2326_private *priv = iio_priv(indio_dev); + unsigned int val; + bool cont; + irqreturn_t ret = IRQ_NONE; + + /* + * Are we using our own internal trigger in triggered buffer mode, i.e., + * currently working in continuous sampling mode ? + */ + cont = (iio_buffer_enabled(indio_dev) && + iio_trigger_using_own(indio_dev)); + + /* + * Device works according to a level interrupt scheme: reading interrupt + * status de-asserts interrupt line. + */ + priv->result = regmap_read(priv->regmap, ZPA2326_INT_SOURCE_REG, &val); + if (priv->result < 0) { + if (cont) + return IRQ_NONE; + + goto complete; + } + + /* Data ready is the only interrupt source we requested. */ + if (!(val & ZPA2326_INT_SOURCE_DATA_READY)) { + /* + * Interrupt happened but no new sample available: likely caused + * by spurious interrupts, in which case, returning IRQ_NONE + * allows to benefit from the generic spurious interrupts + * handling. + */ + zpa2326_warn(indio_dev, "unexpected interrupt status %02x", + val); + + if (cont) + return IRQ_NONE; + + priv->result = -ENODATA; + goto complete; + } + + /* New sample available: dispatch internal trigger consumers. */ + iio_trigger_poll_chained(priv->trigger); + + if (cont) + /* + * Internal hardware trigger has been scheduled above : it will + * fetch data on its own. + */ + return IRQ_HANDLED; + + ret = IRQ_HANDLED; + +complete: + /* + * Wake up direct or externaly triggered buffer mode waiters: see + * zpa2326_sample_oneshot() and zpa2326_trigger_handler(). + */ + complete(&priv->data_ready); + + return ret; +} + +/** + * zpa2326_wait_oneshot_completion() - Wait for oneshot data ready interrupt. + * @indio_dev: The IIO device associated with the sampling hardware. + * @private: Internal private state related to @indio_dev. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev, + struct zpa2326_private *private) +{ + unsigned int val; + long timeout; + + zpa2326_dbg(indio_dev, "waiting for one shot completion interrupt"); + + timeout = wait_for_completion_interruptible_timeout( + &private->data_ready, ZPA2326_CONVERSION_JIFFIES); + if (timeout > 0) + /* + * Interrupt handler completed before timeout: return operation + * status. + */ + return private->result; + + /* Clear all interrupts just to be sure. */ + regmap_read(private->regmap, ZPA2326_INT_SOURCE_REG, &val); + + if (!timeout) { + /* Timed out. */ + zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)", + timeout); + return -ETIME; + } + + zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled"); + return -ERESTARTSYS; +} + +static int zpa2326_init_managed_irq(struct device *parent, + struct iio_dev *indio_dev, + struct zpa2326_private *private, + int irq) +{ + int err; + + private->irq = irq; + + if (irq <= 0) { + /* + * Platform declared no interrupt line: device will be polled + * for data availability. + */ + dev_info(parent, "no interrupt found, running in polling mode"); + return 0; + } + + init_completion(&private->data_ready); + + /* Request handler to be scheduled into threaded interrupt context. */ + err = devm_request_threaded_irq(parent, irq, zpa2326_handle_irq, + zpa2326_handle_threaded_irq, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + dev_name(parent), indio_dev); + if (err) { + dev_err(parent, "failed to request interrupt %d (%d)", irq, + err); + return err; + } + + dev_info(parent, "using interrupt %d", irq); + + return 0; +} + +/** + * zpa2326_poll_oneshot_completion() - Actively poll for one shot data ready. + * @indio_dev: The IIO device associated with the sampling hardware. + * + * Loop over registers content to detect end of sampling cycle. Used when DT + * declared no valid interrupt lines. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_poll_oneshot_completion(const struct iio_dev *indio_dev) +{ + unsigned long tmout = jiffies + ZPA2326_CONVERSION_JIFFIES; + struct regmap *regs = ((struct zpa2326_private *) + iio_priv(indio_dev))->regmap; + unsigned int val; + int err; + + zpa2326_dbg(indio_dev, "polling for one shot completion"); + + /* + * At least, 100 ms is needed for the device to complete its one-shot + * cycle. + */ + if (msleep_interruptible(100)) + return -ERESTARTSYS; + + /* Poll for conversion completion in hardware. */ + while (true) { + err = regmap_read(regs, ZPA2326_CTRL_REG0_REG, &val); + if (err < 0) + goto err; + + if (!(val & ZPA2326_CTRL_REG0_ONE_SHOT)) + /* One-shot bit self clears at conversion end. */ + break; + + if (time_after(jiffies, tmout)) { + /* Prevent from waiting forever : let's time out. */ + err = -ETIME; + goto err; + } + + usleep_range(10000, 20000); + } + + /* + * In oneshot mode, pressure sample availability guarantees that + * temperature conversion has also completed : just check pressure + * status bit to keep things simple. + */ + err = regmap_read(regs, ZPA2326_STATUS_REG, &val); + if (err < 0) + goto err; + + if (!(val & ZPA2326_STATUS_P_DA)) { + /* No sample available. */ + err = -ENODATA; + goto err; + } + + return 0; + +err: + zpa2326_warn(indio_dev, "failed to poll one shot completion (%d)", err); + + return err; +} + +/** + * zpa2326_fetch_raw_sample() - Retrieve a raw sample and convert it to CPU + * endianness. + * @indio_dev: The IIO device associated with the sampling hardware. + * @type: Type of measurement / channel to fetch from. + * @value: Sample output. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_fetch_raw_sample(const struct iio_dev *indio_dev, + enum iio_chan_type type, + int *value) +{ + struct regmap *regs = ((struct zpa2326_private *) + iio_priv(indio_dev))->regmap; + int err; + + switch (type) { + case IIO_PRESSURE: + zpa2326_dbg(indio_dev, "fetching raw pressure sample"); + + err = regmap_bulk_read(regs, ZPA2326_PRESS_OUT_XL_REG, value, + 3); + if (err) { + zpa2326_warn(indio_dev, "failed to fetch pressure (%d)", + err); + return err; + } + + /* Pressure is a 24 bits wide little-endian unsigned int. */ + *value = (((u8 *)value)[2] << 16) | (((u8 *)value)[1] << 8) | + ((u8 *)value)[0]; + + return IIO_VAL_INT; + + case IIO_TEMP: + zpa2326_dbg(indio_dev, "fetching raw temperature sample"); + + err = regmap_bulk_read(regs, ZPA2326_TEMP_OUT_L_REG, value, 2); + if (err) { + zpa2326_warn(indio_dev, + "failed to fetch temperature (%d)", err); + return err; + } + + /* Temperature is a 16 bits wide little-endian signed int. */ + *value = (int)le16_to_cpup((__le16 *)value); + + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +/** + * zpa2326_sample_oneshot() - Perform a complete one shot sampling cycle. + * @indio_dev: The IIO device associated with the sampling hardware. + * @type: Type of measurement / channel to fetch from. + * @value: Sample output. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_sample_oneshot(struct iio_dev *indio_dev, + enum iio_chan_type type, + int *value) +{ + int ret; + struct zpa2326_private *priv; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = zpa2326_resume(indio_dev); + if (ret < 0) + goto release; + + priv = iio_priv(indio_dev); + + if (ret > 0) { + /* + * We were already power supplied. Just clear hardware FIFO to + * get rid of samples acquired during previous rounds (if any). + * Sampling operation always generates both temperature and + * pressure samples. The latter are always enqueued into + * hardware FIFO. This may lead to situations were pressure + * samples still sit into FIFO when previous cycle(s) fetched + * temperature data only. + * Hence, we need to clear hardware FIFO content to prevent from + * getting outdated values at the end of current cycle. + */ + if (type == IIO_PRESSURE) { + ret = zpa2326_clear_fifo(indio_dev, 0); + if (ret) + goto suspend; + } + } else { + /* + * We have just been power supplied, i.e. device is in default + * "out of reset" state, meaning we need to reconfigure it + * entirely. + */ + ret = zpa2326_config_oneshot(indio_dev, priv->irq); + if (ret) + goto suspend; + } + + /* Start a sampling cycle in oneshot mode. */ + ret = zpa2326_start_oneshot(indio_dev); + if (ret) + goto suspend; + + /* Wait for sampling cycle to complete. */ + if (priv->irq > 0) + ret = zpa2326_wait_oneshot_completion(indio_dev, priv); + else + ret = zpa2326_poll_oneshot_completion(indio_dev); + + if (ret) + goto suspend; + + /* Retrieve raw sample value and convert it to CPU endianness. */ + ret = zpa2326_fetch_raw_sample(indio_dev, type, value); + +suspend: + zpa2326_suspend(indio_dev); +release: + iio_device_release_direct_mode(indio_dev); + + return ret; +} + +/** + * zpa2326_trigger_handler() - Perform an IIO buffered sampling round in one + * shot mode. + * @irq: The software interrupt assigned to @data + * @data: The IIO poll function dispatched by external trigger our device is + * attached to. + * + * Bottom-half handler called by the IIO trigger to which our device is + * currently attached. Allows us to synchronize this device buffered sampling + * either with external events (such as timer expiration, external device sample + * ready, etc...) or with its own interrupt (internal hardware trigger). + * + * When using an external trigger, basically run the same sequence of operations + * as for zpa2326_sample_oneshot() with the following hereafter. Hardware FIFO + * is not cleared since already done at buffering enable time and samples + * dequeueing always retrieves the most recent value. + * + * Otherwise, when internal hardware trigger has dispatched us, just fetch data + * from hardware FIFO. + * + * Fetched data will pushed unprocessed to IIO buffer since samples conversion + * is delegated to userspace in buffered mode (endianness, etc...). + * + * Return: + * %IRQ_NONE - no consistent interrupt happened ; + * %IRQ_HANDLED - there was new samples available. + */ +static irqreturn_t zpa2326_trigger_handler(int irq, void *data) +{ + struct iio_dev *indio_dev = ((struct iio_poll_func *) + data)->indio_dev; + struct zpa2326_private *priv = iio_priv(indio_dev); + bool cont; + + /* + * We have been dispatched, meaning we are in triggered buffer mode. + * Using our own internal trigger implies we are currently in continuous + * hardware sampling mode. + */ + cont = iio_trigger_using_own(indio_dev); + + if (!cont) { + /* On demand sampling : start a one shot cycle. */ + if (zpa2326_start_oneshot(indio_dev)) + goto out; + + /* Wait for sampling cycle to complete. */ + if (priv->irq <= 0) { + /* No interrupt available: poll for completion. */ + if (zpa2326_poll_oneshot_completion(indio_dev)) + goto out; + + /* Only timestamp sample once it is ready. */ + priv->timestamp = iio_get_time_ns(indio_dev); + } else { + /* Interrupt handlers will timestamp for us. */ + if (zpa2326_wait_oneshot_completion(indio_dev, priv)) + goto out; + } + } + + /* Enqueue to IIO buffer / userspace. */ + zpa2326_fill_sample_buffer(indio_dev, priv); + +out: + if (!cont) + /* Don't switch to low power if sampling continuously. */ + zpa2326_sleep(indio_dev); + + /* Inform attached trigger we are done. */ + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +/** + * zpa2326_preenable_buffer() - Prepare device for configuring triggered + * sampling + * modes. + * @indio_dev: The IIO device associated with the sampling hardware. + * + * Basically power up device. + * Called with IIO device's lock held. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_preenable_buffer(struct iio_dev *indio_dev) +{ + int ret = zpa2326_resume(indio_dev); + + if (ret < 0) + return ret; + + /* Tell zpa2326_postenable_buffer() if we have just been powered on. */ + ((struct zpa2326_private *) + iio_priv(indio_dev))->waken = iio_priv(indio_dev); + + return 0; +} + +/** + * zpa2326_postenable_buffer() - Configure device for triggered sampling. + * @indio_dev: The IIO device associated with the sampling hardware. + * + * Basically setup one-shot mode if plugging external trigger. + * Otherwise, let internal trigger configure continuous sampling : + * see zpa2326_set_trigger_state(). + * + * If an error is returned, IIO layer will call our postdisable hook for us, + * i.e. no need to explicitly power device off here. + * Called with IIO device's lock held. + * + * Called with IIO device's lock held. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_postenable_buffer(struct iio_dev *indio_dev) +{ + const struct zpa2326_private *priv = iio_priv(indio_dev); + int err; + + if (!priv->waken) { + /* + * We were already power supplied. Just clear hardware FIFO to + * get rid of samples acquired during previous rounds (if any). + */ + err = zpa2326_clear_fifo(indio_dev, 0); + if (err) + goto err; + } + + if (!iio_trigger_using_own(indio_dev) && priv->waken) { + /* + * We are using an external trigger and we have just been + * powered up: reconfigure one-shot mode. + */ + err = zpa2326_config_oneshot(indio_dev, priv->irq); + if (err) + goto err; + } + + /* Plug our own trigger event handler. */ + err = iio_triggered_buffer_postenable(indio_dev); + if (err) + goto err; + + return 0; + +err: + zpa2326_err(indio_dev, "failed to enable buffering (%d)", err); + + return err; +} + +static int zpa2326_postdisable_buffer(struct iio_dev *indio_dev) +{ + zpa2326_suspend(indio_dev); + + return 0; +} + +static const struct iio_buffer_setup_ops zpa2326_buffer_setup_ops = { + .preenable = zpa2326_preenable_buffer, + .postenable = zpa2326_postenable_buffer, + .predisable = iio_triggered_buffer_predisable, + .postdisable = zpa2326_postdisable_buffer +}; + +/** + * zpa2326_set_trigger_state() - Start / stop continuous sampling. + * @trig: The trigger being attached to IIO device associated with the sampling + * hardware. + * @state: Tell whether to start (true) or stop (false) + * + * Basically enable / disable hardware continuous sampling mode. + * + * Called with IIO device's lock held at postenable() or predisable() time. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_set_trigger_state(struct iio_trigger *trig, bool state) +{ + const struct iio_dev *indio_dev = dev_get_drvdata( + trig->dev.parent); + const struct zpa2326_private *priv = iio_priv(indio_dev); + int err; + + if (!state) { + /* + * Switch trigger off : in case of failure, interrupt is left + * disabled in order to prevent handler from accessing released + * resources. + */ + unsigned int val; + + /* + * As device is working in continuous mode, handlers may be + * accessing resources we are currently freeing... + * Prevent this by disabling interrupt handlers and ensure + * the device will generate no more interrupts unless explicitly + * required to, i.e. by restoring back to default one shot mode. + */ + disable_irq(priv->irq); + + /* + * Disable continuous sampling mode to restore settings for + * one shot / direct sampling operations. + */ + err = regmap_write(priv->regmap, ZPA2326_CTRL_REG3_REG, + zpa2326_highest_frequency()->odr); + if (err) + return err; + + /* + * Now that device won't generate interrupts on its own, + * acknowledge any currently active interrupts (may happen on + * rare occasions while stopping continuous mode). + */ + err = regmap_read(priv->regmap, ZPA2326_INT_SOURCE_REG, &val); + if (err < 0) + return err; + + /* + * Re-enable interrupts only if we can guarantee the device will + * generate no more interrupts to prevent handlers from + * accessing released resources. + */ + enable_irq(priv->irq); + + zpa2326_dbg(indio_dev, "continuous mode stopped"); + } else { + /* + * Switch trigger on : start continuous sampling at required + * frequency. + */ + + if (priv->waken) { + /* Enable interrupt if getting out of reset. */ + err = regmap_write(priv->regmap, ZPA2326_CTRL_REG1_REG, + (u8) + ~ZPA2326_CTRL_REG1_MASK_DATA_READY); + if (err) + return err; + } + + /* Enable continuous sampling at specified frequency. */ + err = regmap_write(priv->regmap, ZPA2326_CTRL_REG3_REG, + ZPA2326_CTRL_REG3_ENABLE_MEAS | + priv->frequency->odr); + if (err) + return err; + + zpa2326_dbg(indio_dev, "continuous mode setup @%dHz", + priv->frequency->hz); + } + + return 0; +} + +static const struct iio_trigger_ops zpa2326_trigger_ops = { + .set_trigger_state = zpa2326_set_trigger_state, +}; + +/** + * zpa2326_init_trigger() - Create an interrupt driven / hardware trigger + * allowing to notify external devices a new sample is + * ready. + * @parent: Hardware sampling device @indio_dev is a child of. + * @indio_dev: The IIO device associated with the sampling hardware. + * @private: Internal private state related to @indio_dev. + * @irq: Optional interrupt line the hardware uses to notify new data + * samples are ready. Negative or zero values indicate no interrupts + * are available, meaning polling is required. + * + * Only relevant when DT declares a valid interrupt line. + * + * Return: Zero when successful, a negative error code otherwise. + */ +static int zpa2326_init_managed_trigger(struct device *parent, + struct iio_dev *indio_dev, + struct zpa2326_private *private, + int irq) +{ + struct iio_trigger *trigger; + int ret; + + if (irq <= 0) + return 0; + + trigger = devm_iio_trigger_alloc(parent, "%s-dev%d", + indio_dev->name, indio_dev->id); + if (!trigger) + return -ENOMEM; + + /* Basic setup. */ + trigger->dev.parent = parent; + trigger->ops = &zpa2326_trigger_ops; + + private->trigger = trigger; + + /* Register to triggers space. */ + ret = devm_iio_trigger_register(parent, trigger); + if (ret) + dev_err(parent, "failed to register hardware trigger (%d)", + ret); + + return ret; +} + +static int zpa2326_get_frequency(const struct iio_dev *indio_dev) +{ + return ((struct zpa2326_private *)iio_priv(indio_dev))->frequency->hz; +} + +static int zpa2326_set_frequency(struct iio_dev *indio_dev, int hz) +{ + struct zpa2326_private *priv = iio_priv(indio_dev); + int freq; + int err; + + /* Check if requested frequency is supported. */ + for (freq = 0; freq < ARRAY_SIZE(zpa2326_sampling_frequencies); freq++) + if (zpa2326_sampling_frequencies[freq].hz == hz) + break; + if (freq == ARRAY_SIZE(zpa2326_sampling_frequencies)) + return -EINVAL; + + /* Don't allow changing frequency if buffered sampling is ongoing. */ + err = iio_device_claim_direct_mode(indio_dev); + if (err) + return err; + + priv->frequency = &zpa2326_sampling_frequencies[freq]; + + iio_device_release_direct_mode(indio_dev); + + return 0; +} + +/* Expose supported hardware sampling frequencies (Hz) through sysfs. */ +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1 5 11 23"); + +static struct attribute *zpa2326_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group zpa2326_attribute_group = { + .attrs = zpa2326_attributes, +}; + +static int zpa2326_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_RAW: + return zpa2326_sample_oneshot(indio_dev, chan->type, val); + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_PRESSURE: + /* + * Pressure resolution is 1/64 Pascal. Scale to kPascal + * as required by IIO ABI. + */ + *val = 1; + *val2 = 64000; + return IIO_VAL_FRACTIONAL; + + case IIO_TEMP: + /* + * Temperature follows the equation: + * Temp[degC] = Tempcode * 0.00649 - 176.83 + * where: + * Tempcode is composed the raw sampled 16 bits. + * + * Hence, to produce a temperature in milli-degrees + * Celsius according to IIO ABI, we need to apply the + * following equation to raw samples: + * Temp[milli degC] = (Tempcode + Offset) * Scale + * where: + * Offset = -176.83 / 0.00649 + * Scale = 0.00649 * 1000 + */ + *val = 6; + *val2 = 490000; + return IIO_VAL_INT_PLUS_MICRO; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_TEMP: + *val = -17683000; + *val2 = 649; + return IIO_VAL_FRACTIONAL; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = zpa2326_get_frequency(indio_dev); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int zpa2326_write_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int val, + int val2, + long mask) +{ + if ((mask != IIO_CHAN_INFO_SAMP_FREQ) || val2) + return -EINVAL; + + return zpa2326_set_frequency(indio_dev, val); +} + +static const struct iio_chan_spec zpa2326_channels[] = { + [0] = { + .type = IIO_PRESSURE, + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_LE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + [1] = { + .type = IIO_TEMP, + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_LE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + [2] = IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +static const struct iio_info zpa2326_info = { + .attrs = &zpa2326_attribute_group, + .read_raw = zpa2326_read_raw, + .write_raw = zpa2326_write_raw, +}; + +static struct iio_dev *zpa2326_create_managed_iiodev(struct device *device, + const char *name, + struct regmap *regmap) +{ + struct iio_dev *indio_dev; + + /* Allocate space to hold IIO device internal state. */ + indio_dev = devm_iio_device_alloc(device, + sizeof(struct zpa2326_private)); + if (!indio_dev) + return NULL; + + /* Setup for userspace synchronous on demand sampling. */ + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->dev.parent = device; + indio_dev->channels = zpa2326_channels; + indio_dev->num_channels = ARRAY_SIZE(zpa2326_channels); + indio_dev->name = name; + indio_dev->info = &zpa2326_info; + + return indio_dev; +} + +int zpa2326_probe(struct device *parent, + const char *name, + int irq, + unsigned int hwid, + struct regmap *regmap) +{ + struct iio_dev *indio_dev; + struct zpa2326_private *priv; + int err; + unsigned int id; + + indio_dev = zpa2326_create_managed_iiodev(parent, name, regmap); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + + priv->vref = devm_regulator_get(parent, "vref"); + if (IS_ERR(priv->vref)) + return PTR_ERR(priv->vref); + + priv->vdd = devm_regulator_get(parent, "vdd"); + if (IS_ERR(priv->vdd)) + return PTR_ERR(priv->vdd); + + /* Set default hardware sampling frequency to highest rate supported. */ + priv->frequency = zpa2326_highest_frequency(); + + /* + * Plug device's underlying bus abstraction : this MUST be set before + * registering interrupt handlers since an interrupt might happen if + * power up sequence is not properly applied. + */ + priv->regmap = regmap; + + err = devm_iio_triggered_buffer_setup(parent, indio_dev, NULL, + zpa2326_trigger_handler, + &zpa2326_buffer_setup_ops); + if (err) + return err; + + err = zpa2326_init_managed_trigger(parent, indio_dev, priv, irq); + if (err) + return err; + + err = zpa2326_init_managed_irq(parent, indio_dev, priv, irq); + if (err) + return err; + + /* Power up to check device ID and perform initial hardware setup. */ + err = zpa2326_power_on(indio_dev, priv); + if (err) + return err; + + /* Read id register to check we are talking to the right slave. */ + err = regmap_read(regmap, ZPA2326_DEVICE_ID_REG, &id); + if (err) + goto sleep; + + if (id != hwid) { + dev_err(parent, "found device with unexpected id %02x", id); + err = -ENODEV; + goto sleep; + } + + err = zpa2326_config_oneshot(indio_dev, irq); + if (err) + goto sleep; + + /* Setup done : go sleeping. Device will be awaken upon user request. */ + err = zpa2326_sleep(indio_dev); + if (err) + goto poweroff; + + dev_set_drvdata(parent, indio_dev); + + zpa2326_init_runtime(parent); + + err = iio_device_register(indio_dev); + if (err) { + zpa2326_fini_runtime(parent); + goto poweroff; + } + + return 0; + +sleep: + /* Put to sleep just in case power regulators are "dummy" ones. */ + zpa2326_sleep(indio_dev); +poweroff: + zpa2326_power_off(indio_dev, priv); + + return err; +} +EXPORT_SYMBOL_GPL(zpa2326_probe); + +void zpa2326_remove(const struct device *parent) +{ + struct iio_dev *indio_dev = dev_get_drvdata(parent); + + iio_device_unregister(indio_dev); + zpa2326_fini_runtime(indio_dev->dev.parent); + zpa2326_sleep(indio_dev); + zpa2326_power_off(indio_dev, iio_priv(indio_dev)); +} +EXPORT_SYMBOL_GPL(zpa2326_remove); + +MODULE_AUTHOR("Gregor Boirie <gregor.boirie@parrot.com>"); +MODULE_DESCRIPTION("Core driver for Murata ZPA2326 pressure sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/zpa2326.h b/drivers/iio/pressure/zpa2326.h new file mode 100644 index 000000000..05d3e1e3a --- /dev/null +++ b/drivers/iio/pressure/zpa2326.h @@ -0,0 +1,89 @@ +/* + * Murata ZPA2326 pressure and temperature sensor IIO driver + * + * Copyright (c) 2016 Parrot S.A. + * + * Author: Gregor Boirie <gregor.boirie@parrot.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _ZPA2326_H +#define _ZPA2326_H + +/* Register map. */ +#define ZPA2326_REF_P_XL_REG (0x8) +#define ZPA2326_REF_P_L_REG (0x9) +#define ZPA2326_REF_P_H_REG (0xa) +#define ZPA2326_DEVICE_ID_REG (0xf) +#define ZPA2326_DEVICE_ID (0xb9) +#define ZPA2326_RES_CONF_REG (0x10) +#define ZPA2326_CTRL_REG0_REG (0x20) +#define ZPA2326_CTRL_REG0_ONE_SHOT BIT(0) +#define ZPA2326_CTRL_REG0_ENABLE BIT(1) +#define ZPA2326_CTRL_REG1_REG (0x21) +#define ZPA2326_CTRL_REG1_MASK_DATA_READY BIT(2) +#define ZPA2326_CTRL_REG2_REG (0x22) +#define ZPA2326_CTRL_REG2_SWRESET BIT(2) +#define ZPA2326_CTRL_REG3_REG (0x23) +#define ZPA2326_CTRL_REG3_ODR_SHIFT (4) +#define ZPA2326_CTRL_REG3_ENABLE_MEAS BIT(7) +#define ZPA2326_INT_SOURCE_REG (0x24) +#define ZPA2326_INT_SOURCE_DATA_READY BIT(2) +#define ZPA2326_THS_P_LOW_REG (0x25) +#define ZPA2326_THS_P_HIGH_REG (0x26) +#define ZPA2326_STATUS_REG (0x27) +#define ZPA2326_STATUS_P_DA BIT(1) +#define ZPA2326_STATUS_FIFO_E BIT(2) +#define ZPA2326_STATUS_P_OR BIT(5) +#define ZPA2326_PRESS_OUT_XL_REG (0x28) +#define ZPA2326_PRESS_OUT_L_REG (0x29) +#define ZPA2326_PRESS_OUT_H_REG (0x2a) +#define ZPA2326_TEMP_OUT_L_REG (0x2b) +#define ZPA2326_TEMP_OUT_H_REG (0x2c) + +struct device; +struct regmap; + +bool zpa2326_isreg_writeable(struct device *dev, unsigned int reg); +bool zpa2326_isreg_readable(struct device *dev, unsigned int reg); +bool zpa2326_isreg_precious(struct device *dev, unsigned int reg); + +/** + * zpa2326_probe() - Instantiate and register core ZPA2326 IIO device + * @parent: Hardware sampling device the created IIO device will be a child of. + * @name: Arbitrary name to identify the device. + * @irq: Interrupt line, negative if none. + * @hwid: Expected device hardware id. + * @regmap: Registers map used to abstract underlying bus accesses. + * + * Return: Zero when successful, a negative error code otherwise. + */ +int zpa2326_probe(struct device *parent, + const char *name, + int irq, + unsigned int hwid, + struct regmap *regmap); + +/** + * zpa2326_remove() - Unregister and destroy core ZPA2326 IIO device. + * @parent: Hardware sampling device the IIO device to remove is a child of. + */ +void zpa2326_remove(const struct device *parent); + +#ifdef CONFIG_PM +#include <linux/pm.h> +extern const struct dev_pm_ops zpa2326_pm_ops; +#define ZPA2326_PM_OPS (&zpa2326_pm_ops) +#else +#define ZPA2326_PM_OPS (NULL) +#endif + +#endif diff --git a/drivers/iio/pressure/zpa2326_i2c.c b/drivers/iio/pressure/zpa2326_i2c.c new file mode 100644 index 000000000..e4d27dd44 --- /dev/null +++ b/drivers/iio/pressure/zpa2326_i2c.c @@ -0,0 +1,99 @@ +/* + * Murata ZPA2326 I2C pressure and temperature sensor driver + * + * Copyright (c) 2016 Parrot S.A. + * + * Author: Gregor Boirie <gregor.boirie@parrot.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/of_device.h> +#include "zpa2326.h" + +/* + * read_flag_mask: + * - address bit 7 must be set to request a register read operation + */ +static const struct regmap_config zpa2326_regmap_i2c_config = { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = zpa2326_isreg_writeable, + .readable_reg = zpa2326_isreg_readable, + .precious_reg = zpa2326_isreg_precious, + .max_register = ZPA2326_TEMP_OUT_H_REG, + .read_flag_mask = BIT(7), + .cache_type = REGCACHE_NONE, +}; + +static unsigned int zpa2326_i2c_hwid(const struct i2c_client *client) +{ +#define ZPA2326_SA0(_addr) (_addr & BIT(0)) +#define ZPA2326_DEVICE_ID_SA0_SHIFT (1) + + /* Identification register bit 1 mirrors device address bit 0. */ + return (ZPA2326_DEVICE_ID | + (ZPA2326_SA0(client->addr) << ZPA2326_DEVICE_ID_SA0_SHIFT)); +} + +static int zpa2326_probe_i2c(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, &zpa2326_regmap_i2c_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "failed to init registers map"); + return PTR_ERR(regmap); + } + + return zpa2326_probe(&client->dev, i2c_id->name, client->irq, + zpa2326_i2c_hwid(client), regmap); +} + +static int zpa2326_remove_i2c(struct i2c_client *client) +{ + zpa2326_remove(&client->dev); + + return 0; +} + +static const struct i2c_device_id zpa2326_i2c_ids[] = { + { "zpa2326", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, zpa2326_i2c_ids); + +#if defined(CONFIG_OF) +static const struct of_device_id zpa2326_i2c_matches[] = { + { .compatible = "murata,zpa2326" }, + { } +}; +MODULE_DEVICE_TABLE(of, zpa2326_i2c_matches); +#endif + +static struct i2c_driver zpa2326_i2c_driver = { + .driver = { + .name = "zpa2326-i2c", + .of_match_table = of_match_ptr(zpa2326_i2c_matches), + .pm = ZPA2326_PM_OPS, + }, + .probe = zpa2326_probe_i2c, + .remove = zpa2326_remove_i2c, + .id_table = zpa2326_i2c_ids, +}; +module_i2c_driver(zpa2326_i2c_driver); + +MODULE_AUTHOR("Gregor Boirie <gregor.boirie@parrot.com>"); +MODULE_DESCRIPTION("I2C driver for Murata ZPA2326 pressure sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/zpa2326_spi.c b/drivers/iio/pressure/zpa2326_spi.c new file mode 100644 index 000000000..bd2c1c319 --- /dev/null +++ b/drivers/iio/pressure/zpa2326_spi.c @@ -0,0 +1,103 @@ +/* + * Murata ZPA2326 SPI pressure and temperature sensor driver + * + * Copyright (c) 2016 Parrot S.A. + * + * Author: Gregor Boirie <gregor.boirie@parrot.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> +#include <linux/of_device.h> +#include "zpa2326.h" + +/* + * read_flag_mask: + * - address bit 7 must be set to request a register read operation + * - address bit 6 must be set to request register address auto increment + */ +static const struct regmap_config zpa2326_regmap_spi_config = { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = zpa2326_isreg_writeable, + .readable_reg = zpa2326_isreg_readable, + .precious_reg = zpa2326_isreg_precious, + .max_register = ZPA2326_TEMP_OUT_H_REG, + .read_flag_mask = BIT(7) | BIT(6), + .cache_type = REGCACHE_NONE, +}; + +static int zpa2326_probe_spi(struct spi_device *spi) +{ + struct regmap *regmap; + int err; + + regmap = devm_regmap_init_spi(spi, &zpa2326_regmap_spi_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "failed to init registers map"); + return PTR_ERR(regmap); + } + + /* + * Enforce SPI slave settings to prevent from DT misconfiguration. + * + * Clock is idle high. Sampling happens on trailing edge, i.e., rising + * edge. Maximum bus frequency is 1 MHz. Registers are 8 bits wide. + */ + spi->mode = SPI_MODE_3; + spi->max_speed_hz = min(spi->max_speed_hz, 1000000U); + spi->bits_per_word = 8; + err = spi_setup(spi); + if (err < 0) + return err; + + return zpa2326_probe(&spi->dev, spi_get_device_id(spi)->name, + spi->irq, ZPA2326_DEVICE_ID, regmap); +} + +static int zpa2326_remove_spi(struct spi_device *spi) +{ + zpa2326_remove(&spi->dev); + + return 0; +} + +static const struct spi_device_id zpa2326_spi_ids[] = { + { "zpa2326", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, zpa2326_spi_ids); + +#if defined(CONFIG_OF) +static const struct of_device_id zpa2326_spi_matches[] = { + { .compatible = "murata,zpa2326" }, + { } +}; +MODULE_DEVICE_TABLE(of, zpa2326_spi_matches); +#endif + +static struct spi_driver zpa2326_spi_driver = { + .driver = { + .name = "zpa2326-spi", + .of_match_table = of_match_ptr(zpa2326_spi_matches), + .pm = ZPA2326_PM_OPS, + }, + .probe = zpa2326_probe_spi, + .remove = zpa2326_remove_spi, + .id_table = zpa2326_spi_ids, +}; +module_spi_driver(zpa2326_spi_driver); + +MODULE_AUTHOR("Gregor Boirie <gregor.boirie@parrot.com>"); +MODULE_DESCRIPTION("SPI driver for Murata ZPA2326 pressure sensor"); +MODULE_LICENSE("GPL v2"); |