diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/mtd/nand/onenand/onenand_base.c | 4016 |
1 files changed, 4016 insertions, 0 deletions
diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c new file mode 100644 index 000000000..db3587d30 --- /dev/null +++ b/drivers/mtd/nand/onenand/onenand_base.c @@ -0,0 +1,4016 @@ +/* + * Copyright © 2005-2009 Samsung Electronics + * Copyright © 2007 Nokia Corporation + * + * Kyungmin Park <kyungmin.park@samsung.com> + * + * Credits: + * Adrian Hunter <ext-adrian.hunter@nokia.com>: + * auto-placement support, read-while load support, various fixes + * + * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com> + * Flex-OneNAND support + * Amul Kumar Saha <amul.saha at samsung.com> + * OTP support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <linux/mtd/partitions.h> + +#include <asm/io.h> + +/* + * Multiblock erase if number of blocks to erase is 2 or more. + * Maximum number of blocks for simultaneous erase is 64. + */ +#define MB_ERASE_MIN_BLK_COUNT 2 +#define MB_ERASE_MAX_BLK_COUNT 64 + +/* Default Flex-OneNAND boundary and lock respectively */ +static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 }; + +module_param_array(flex_bdry, int, NULL, 0400); +MODULE_PARM_DESC(flex_bdry, "SLC Boundary information for Flex-OneNAND" + "Syntax:flex_bdry=DIE_BDRY,LOCK,..." + "DIE_BDRY: SLC boundary of the die" + "LOCK: Locking information for SLC boundary" + " : 0->Set boundary in unlocked status" + " : 1->Set boundary in locked status"); + +/* Default OneNAND/Flex-OneNAND OTP options*/ +static int otp; + +module_param(otp, int, 0400); +MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP" + "Syntax : otp=LOCK_TYPE" + "LOCK_TYPE : Keys issued, for specific OTP Lock type" + " : 0 -> Default (No Blocks Locked)" + " : 1 -> OTP Block lock" + " : 2 -> 1st Block lock" + " : 3 -> BOTH OTP Block and 1st Block lock"); + +/* + * flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page + * For now, we expose only 64 out of 80 ecc bytes + */ +static int flexonenand_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 16) + 6; + oobregion->length = 10; + + return 0; +} + +static int flexonenand_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 16) + 2; + oobregion->length = 4; + + return 0; +} + +static const struct mtd_ooblayout_ops flexonenand_ooblayout_ops = { + .ecc = flexonenand_ooblayout_ecc, + .free = flexonenand_ooblayout_free, +}; + +/* + * onenand_oob_128 - oob info for OneNAND with 4KB page + * + * Based on specification: + * 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010 + * + */ +static int onenand_ooblayout_128_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 16) + 7; + oobregion->length = 9; + + return 0; +} + +static int onenand_ooblayout_128_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section >= 8) + return -ERANGE; + + /* + * free bytes are using the spare area fields marked as + * "Managed by internal ECC logic for Logical Sector Number area" + */ + oobregion->offset = (section * 16) + 2; + oobregion->length = 3; + + return 0; +} + +static const struct mtd_ooblayout_ops onenand_oob_128_ooblayout_ops = { + .ecc = onenand_ooblayout_128_ecc, + .free = onenand_ooblayout_128_free, +}; + +/** + * onenand_oob_32_64 - oob info for large (2KB) page + */ +static int onenand_ooblayout_32_64_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 3) + return -ERANGE; + + oobregion->offset = (section * 16) + 8; + oobregion->length = 5; + + return 0; +} + +static int onenand_ooblayout_32_64_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + int sections = (mtd->oobsize / 32) * 2; + + if (section >= sections) + return -ERANGE; + + if (section & 1) { + oobregion->offset = ((section - 1) * 16) + 14; + oobregion->length = 2; + } else { + oobregion->offset = (section * 16) + 2; + oobregion->length = 3; + } + + return 0; +} + +static const struct mtd_ooblayout_ops onenand_oob_32_64_ooblayout_ops = { + .ecc = onenand_ooblayout_32_64_ecc, + .free = onenand_ooblayout_32_64_free, +}; + +static const unsigned char ffchars[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */ +}; + +/** + * onenand_readw - [OneNAND Interface] Read OneNAND register + * @param addr address to read + * + * Read OneNAND register + */ +static unsigned short onenand_readw(void __iomem *addr) +{ + return readw(addr); +} + +/** + * onenand_writew - [OneNAND Interface] Write OneNAND register with value + * @param value value to write + * @param addr address to write + * + * Write OneNAND register with value + */ +static void onenand_writew(unsigned short value, void __iomem *addr) +{ + writew(value, addr); +} + +/** + * onenand_block_address - [DEFAULT] Get block address + * @param this onenand chip data structure + * @param block the block + * @return translated block address if DDP, otherwise same + * + * Setup Start Address 1 Register (F100h) + */ +static int onenand_block_address(struct onenand_chip *this, int block) +{ + /* Device Flash Core select, NAND Flash Block Address */ + if (block & this->density_mask) + return ONENAND_DDP_CHIP1 | (block ^ this->density_mask); + + return block; +} + +/** + * onenand_bufferram_address - [DEFAULT] Get bufferram address + * @param this onenand chip data structure + * @param block the block + * @return set DBS value if DDP, otherwise 0 + * + * Setup Start Address 2 Register (F101h) for DDP + */ +static int onenand_bufferram_address(struct onenand_chip *this, int block) +{ + /* Device BufferRAM Select */ + if (block & this->density_mask) + return ONENAND_DDP_CHIP1; + + return ONENAND_DDP_CHIP0; +} + +/** + * onenand_page_address - [DEFAULT] Get page address + * @param page the page address + * @param sector the sector address + * @return combined page and sector address + * + * Setup Start Address 8 Register (F107h) + */ +static int onenand_page_address(int page, int sector) +{ + /* Flash Page Address, Flash Sector Address */ + int fpa, fsa; + + fpa = page & ONENAND_FPA_MASK; + fsa = sector & ONENAND_FSA_MASK; + + return ((fpa << ONENAND_FPA_SHIFT) | fsa); +} + +/** + * onenand_buffer_address - [DEFAULT] Get buffer address + * @param dataram1 DataRAM index + * @param sectors the sector address + * @param count the number of sectors + * @return the start buffer value + * + * Setup Start Buffer Register (F200h) + */ +static int onenand_buffer_address(int dataram1, int sectors, int count) +{ + int bsa, bsc; + + /* BufferRAM Sector Address */ + bsa = sectors & ONENAND_BSA_MASK; + + if (dataram1) + bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */ + else + bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */ + + /* BufferRAM Sector Count */ + bsc = count & ONENAND_BSC_MASK; + + return ((bsa << ONENAND_BSA_SHIFT) | bsc); +} + +/** + * flexonenand_block- For given address return block number + * @param this - OneNAND device structure + * @param addr - Address for which block number is needed + */ +static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr) +{ + unsigned boundary, blk, die = 0; + + if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) { + die = 1; + addr -= this->diesize[0]; + } + + boundary = this->boundary[die]; + + blk = addr >> (this->erase_shift - 1); + if (blk > boundary) + blk = (blk + boundary + 1) >> 1; + + blk += die ? this->density_mask : 0; + return blk; +} + +inline unsigned onenand_block(struct onenand_chip *this, loff_t addr) +{ + if (!FLEXONENAND(this)) + return addr >> this->erase_shift; + return flexonenand_block(this, addr); +} + +/** + * flexonenand_addr - Return address of the block + * @this: OneNAND device structure + * @block: Block number on Flex-OneNAND + * + * Return address of the block + */ +static loff_t flexonenand_addr(struct onenand_chip *this, int block) +{ + loff_t ofs = 0; + int die = 0, boundary; + + if (ONENAND_IS_DDP(this) && block >= this->density_mask) { + block -= this->density_mask; + die = 1; + ofs = this->diesize[0]; + } + + boundary = this->boundary[die]; + ofs += (loff_t)block << (this->erase_shift - 1); + if (block > (boundary + 1)) + ofs += (loff_t)(block - boundary - 1) << (this->erase_shift - 1); + return ofs; +} + +loff_t onenand_addr(struct onenand_chip *this, int block) +{ + if (!FLEXONENAND(this)) + return (loff_t)block << this->erase_shift; + return flexonenand_addr(this, block); +} +EXPORT_SYMBOL(onenand_addr); + +/** + * onenand_get_density - [DEFAULT] Get OneNAND density + * @param dev_id OneNAND device ID + * + * Get OneNAND density from device ID + */ +static inline int onenand_get_density(int dev_id) +{ + int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; + return (density & ONENAND_DEVICE_DENSITY_MASK); +} + +/** + * flexonenand_region - [Flex-OneNAND] Return erase region of addr + * @param mtd MTD device structure + * @param addr address whose erase region needs to be identified + */ +int flexonenand_region(struct mtd_info *mtd, loff_t addr) +{ + int i; + + for (i = 0; i < mtd->numeraseregions; i++) + if (addr < mtd->eraseregions[i].offset) + break; + return i - 1; +} +EXPORT_SYMBOL(flexonenand_region); + +/** + * onenand_command - [DEFAULT] Send command to OneNAND device + * @param mtd MTD device structure + * @param cmd the command to be sent + * @param addr offset to read from or write to + * @param len number of bytes to read or write + * + * Send command to OneNAND device. This function is used for middle/large page + * devices (1KB/2KB Bytes per page) + */ +static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len) +{ + struct onenand_chip *this = mtd->priv; + int value, block, page; + + /* Address translation */ + switch (cmd) { + case ONENAND_CMD_UNLOCK: + case ONENAND_CMD_LOCK: + case ONENAND_CMD_LOCK_TIGHT: + case ONENAND_CMD_UNLOCK_ALL: + block = -1; + page = -1; + break; + + case FLEXONENAND_CMD_PI_ACCESS: + /* addr contains die index */ + block = addr * this->density_mask; + page = -1; + break; + + case ONENAND_CMD_ERASE: + case ONENAND_CMD_MULTIBLOCK_ERASE: + case ONENAND_CMD_ERASE_VERIFY: + case ONENAND_CMD_BUFFERRAM: + case ONENAND_CMD_OTP_ACCESS: + block = onenand_block(this, addr); + page = -1; + break; + + case FLEXONENAND_CMD_READ_PI: + cmd = ONENAND_CMD_READ; + block = addr * this->density_mask; + page = 0; + break; + + default: + block = onenand_block(this, addr); + if (FLEXONENAND(this)) + page = (int) (addr - onenand_addr(this, block))>>\ + this->page_shift; + else + page = (int) (addr >> this->page_shift); + if (ONENAND_IS_2PLANE(this)) { + /* Make the even block number */ + block &= ~1; + /* Is it the odd plane? */ + if (addr & this->writesize) + block++; + page >>= 1; + } + page &= this->page_mask; + break; + } + + /* NOTE: The setting order of the registers is very important! */ + if (cmd == ONENAND_CMD_BUFFERRAM) { + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + + if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this)) + /* It is always BufferRAM0 */ + ONENAND_SET_BUFFERRAM0(this); + else + /* Switch to the next data buffer */ + ONENAND_SET_NEXT_BUFFERRAM(this); + + return 0; + } + + if (block != -1) { + /* Write 'DFS, FBA' of Flash */ + value = onenand_block_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + } + + if (page != -1) { + /* Now we use page size operation */ + int sectors = 0, count = 0; + int dataram; + + switch (cmd) { + case FLEXONENAND_CMD_RECOVER_LSB: + case ONENAND_CMD_READ: + case ONENAND_CMD_READOOB: + if (ONENAND_IS_4KB_PAGE(this)) + /* It is always BufferRAM0 */ + dataram = ONENAND_SET_BUFFERRAM0(this); + else + dataram = ONENAND_SET_NEXT_BUFFERRAM(this); + break; + + default: + if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG) + cmd = ONENAND_CMD_2X_PROG; + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } + + /* Write 'FPA, FSA' of Flash */ + value = onenand_page_address(page, sectors); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS8); + + /* Write 'BSA, BSC' of DataRAM */ + value = onenand_buffer_address(dataram, sectors, count); + this->write_word(value, this->base + ONENAND_REG_START_BUFFER); + } + + /* Interrupt clear */ + this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT); + + /* Write command */ + this->write_word(cmd, this->base + ONENAND_REG_COMMAND); + + return 0; +} + +/** + * onenand_read_ecc - return ecc status + * @param this onenand chip structure + */ +static inline int onenand_read_ecc(struct onenand_chip *this) +{ + int ecc, i, result = 0; + + if (!FLEXONENAND(this) && !ONENAND_IS_4KB_PAGE(this)) + return this->read_word(this->base + ONENAND_REG_ECC_STATUS); + + for (i = 0; i < 4; i++) { + ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS + i*2); + if (likely(!ecc)) + continue; + if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR) + return ONENAND_ECC_2BIT_ALL; + else + result = ONENAND_ECC_1BIT_ALL; + } + + return result; +} + +/** + * onenand_wait - [DEFAULT] wait until the command is done + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Wait for command done. This applies to all OneNAND command + * Read can take up to 30us, erase up to 2ms and program up to 350us + * according to general OneNAND specs + */ +static int onenand_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip * this = mtd->priv; + unsigned long timeout; + unsigned int flags = ONENAND_INT_MASTER; + unsigned int interrupt = 0; + unsigned int ctrl; + + /* The 20 msec is enough */ + timeout = jiffies + msecs_to_jiffies(20); + while (time_before(jiffies, timeout)) { + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + + if (interrupt & flags) + break; + + if (state != FL_READING && state != FL_PREPARING_ERASE) + cond_resched(); + } + /* To get correct interrupt status in timeout case */ + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + + ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + + /* + * In the Spec. it checks the controller status first + * However if you get the correct information in case of + * power off recovery (POR) test, it should read ECC status first + */ + if (interrupt & ONENAND_INT_READ) { + int ecc = onenand_read_ecc(this); + if (ecc) { + if (ecc & ONENAND_ECC_2BIT_ALL) { + printk(KERN_ERR "%s: ECC error = 0x%04x\n", + __func__, ecc); + mtd->ecc_stats.failed++; + return -EBADMSG; + } else if (ecc & ONENAND_ECC_1BIT_ALL) { + printk(KERN_DEBUG "%s: correctable ECC error = 0x%04x\n", + __func__, ecc); + mtd->ecc_stats.corrected++; + } + } + } else if (state == FL_READING) { + printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n", + __func__, ctrl, interrupt); + return -EIO; + } + + if (state == FL_PREPARING_ERASE && !(interrupt & ONENAND_INT_ERASE)) { + printk(KERN_ERR "%s: mb erase timeout! ctrl=0x%04x intr=0x%04x\n", + __func__, ctrl, interrupt); + return -EIO; + } + + if (!(interrupt & ONENAND_INT_MASTER)) { + printk(KERN_ERR "%s: timeout! ctrl=0x%04x intr=0x%04x\n", + __func__, ctrl, interrupt); + return -EIO; + } + + /* If there's controller error, it's a real error */ + if (ctrl & ONENAND_CTRL_ERROR) { + printk(KERN_ERR "%s: controller error = 0x%04x\n", + __func__, ctrl); + if (ctrl & ONENAND_CTRL_LOCK) + printk(KERN_ERR "%s: it's locked error.\n", __func__); + return -EIO; + } + + return 0; +} + +/* + * onenand_interrupt - [DEFAULT] onenand interrupt handler + * @param irq onenand interrupt number + * @param dev_id interrupt data + * + * complete the work + */ +static irqreturn_t onenand_interrupt(int irq, void *data) +{ + struct onenand_chip *this = data; + + /* To handle shared interrupt */ + if (!this->complete.done) + complete(&this->complete); + + return IRQ_HANDLED; +} + +/* + * onenand_interrupt_wait - [DEFAULT] wait until the command is done + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Wait for command done. + */ +static int onenand_interrupt_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip *this = mtd->priv; + + wait_for_completion(&this->complete); + + return onenand_wait(mtd, state); +} + +/* + * onenand_try_interrupt_wait - [DEFAULT] try interrupt wait + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Try interrupt based wait (It is used one-time) + */ +static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip *this = mtd->priv; + unsigned long remain, timeout; + + /* We use interrupt wait first */ + this->wait = onenand_interrupt_wait; + + timeout = msecs_to_jiffies(100); + remain = wait_for_completion_timeout(&this->complete, timeout); + if (!remain) { + printk(KERN_INFO "OneNAND: There's no interrupt. " + "We use the normal wait\n"); + + /* Release the irq */ + free_irq(this->irq, this); + + this->wait = onenand_wait; + } + + return onenand_wait(mtd, state); +} + +/* + * onenand_setup_wait - [OneNAND Interface] setup onenand wait method + * @param mtd MTD device structure + * + * There's two method to wait onenand work + * 1. polling - read interrupt status register + * 2. interrupt - use the kernel interrupt method + */ +static void onenand_setup_wait(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int syscfg; + + init_completion(&this->complete); + + if (this->irq <= 0) { + this->wait = onenand_wait; + return; + } + + if (request_irq(this->irq, &onenand_interrupt, + IRQF_SHARED, "onenand", this)) { + /* If we can't get irq, use the normal wait */ + this->wait = onenand_wait; + return; + } + + /* Enable interrupt */ + syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); + syscfg |= ONENAND_SYS_CFG1_IOBE; + this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); + + this->wait = onenand_try_interrupt_wait; +} + +/** + * onenand_bufferram_offset - [DEFAULT] BufferRAM offset + * @param mtd MTD data structure + * @param area BufferRAM area + * @return offset given area + * + * Return BufferRAM offset given area + */ +static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area) +{ + struct onenand_chip *this = mtd->priv; + + if (ONENAND_CURRENT_BUFFERRAM(this)) { + /* Note: the 'this->writesize' is a real page size */ + if (area == ONENAND_DATARAM) + return this->writesize; + if (area == ONENAND_SPARERAM) + return mtd->oobsize; + } + + return 0; +} + +/** + * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Read the BufferRAM area + */ +static int onenand_read_bufferram(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + + bufferram += onenand_bufferram_offset(mtd, area); + + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + + /* Align with word(16-bit) size */ + count--; + + /* Read word and save byte */ + word = this->read_word(bufferram + offset + count); + buffer[count] = (word & 0xff); + } + + memcpy(buffer, bufferram + offset, count); + + return 0; +} + +/** + * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Read the BufferRAM area with Sync. Burst Mode + */ +static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + + bufferram += onenand_bufferram_offset(mtd, area); + + this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ); + + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + + /* Align with word(16-bit) size */ + count--; + + /* Read word and save byte */ + word = this->read_word(bufferram + offset + count); + buffer[count] = (word & 0xff); + } + + memcpy(buffer, bufferram + offset, count); + + this->mmcontrol(mtd, 0); + + return 0; +} + +/** + * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Write the BufferRAM area + */ +static int onenand_write_bufferram(struct mtd_info *mtd, int area, + const unsigned char *buffer, int offset, size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + + bufferram += onenand_bufferram_offset(mtd, area); + + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + int byte_offset; + + /* Align with word(16-bit) size */ + count--; + + /* Calculate byte access offset */ + byte_offset = offset + count; + + /* Read word and save byte */ + word = this->read_word(bufferram + byte_offset); + word = (word & ~0xff) | buffer[count]; + this->write_word(word, bufferram + byte_offset); + } + + memcpy(bufferram + offset, buffer, count); + + return 0; +} + +/** + * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode + * @param mtd MTD data structure + * @param addr address to check + * @return blockpage address + * + * Get blockpage address at 2x program mode + */ +static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr) +{ + struct onenand_chip *this = mtd->priv; + int blockpage, block, page; + + /* Calculate the even block number */ + block = (int) (addr >> this->erase_shift) & ~1; + /* Is it the odd plane? */ + if (addr & this->writesize) + block++; + page = (int) (addr >> (this->page_shift + 1)) & this->page_mask; + blockpage = (block << 7) | page; + + return blockpage; +} + +/** + * onenand_check_bufferram - [GENERIC] Check BufferRAM information + * @param mtd MTD data structure + * @param addr address to check + * @return 1 if there are valid data, otherwise 0 + * + * Check bufferram if there is data we required + */ +static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) +{ + struct onenand_chip *this = mtd->priv; + int blockpage, found = 0; + unsigned int i; + + if (ONENAND_IS_2PLANE(this)) + blockpage = onenand_get_2x_blockpage(mtd, addr); + else + blockpage = (int) (addr >> this->page_shift); + + /* Is there valid data? */ + i = ONENAND_CURRENT_BUFFERRAM(this); + if (this->bufferram[i].blockpage == blockpage) + found = 1; + else { + /* Check another BufferRAM */ + i = ONENAND_NEXT_BUFFERRAM(this); + if (this->bufferram[i].blockpage == blockpage) { + ONENAND_SET_NEXT_BUFFERRAM(this); + found = 1; + } + } + + if (found && ONENAND_IS_DDP(this)) { + /* Select DataRAM for DDP */ + int block = onenand_block(this, addr); + int value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + } + + return found; +} + +/** + * onenand_update_bufferram - [GENERIC] Update BufferRAM information + * @param mtd MTD data structure + * @param addr address to update + * @param valid valid flag + * + * Update BufferRAM information + */ +static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr, + int valid) +{ + struct onenand_chip *this = mtd->priv; + int blockpage; + unsigned int i; + + if (ONENAND_IS_2PLANE(this)) + blockpage = onenand_get_2x_blockpage(mtd, addr); + else + blockpage = (int) (addr >> this->page_shift); + + /* Invalidate another BufferRAM */ + i = ONENAND_NEXT_BUFFERRAM(this); + if (this->bufferram[i].blockpage == blockpage) + this->bufferram[i].blockpage = -1; + + /* Update BufferRAM */ + i = ONENAND_CURRENT_BUFFERRAM(this); + if (valid) + this->bufferram[i].blockpage = blockpage; + else + this->bufferram[i].blockpage = -1; +} + +/** + * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information + * @param mtd MTD data structure + * @param addr start address to invalidate + * @param len length to invalidate + * + * Invalidate BufferRAM information + */ +static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr, + unsigned int len) +{ + struct onenand_chip *this = mtd->priv; + int i; + loff_t end_addr = addr + len; + + /* Invalidate BufferRAM */ + for (i = 0; i < MAX_BUFFERRAM; i++) { + loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift; + if (buf_addr >= addr && buf_addr < end_addr) + this->bufferram[i].blockpage = -1; + } +} + +/** + * onenand_get_device - [GENERIC] Get chip for selected access + * @param mtd MTD device structure + * @param new_state the state which is requested + * + * Get the device and lock it for exclusive access + */ +static int onenand_get_device(struct mtd_info *mtd, int new_state) +{ + struct onenand_chip *this = mtd->priv; + DECLARE_WAITQUEUE(wait, current); + + /* + * Grab the lock and see if the device is available + */ + while (1) { + spin_lock(&this->chip_lock); + if (this->state == FL_READY) { + this->state = new_state; + spin_unlock(&this->chip_lock); + if (new_state != FL_PM_SUSPENDED && this->enable) + this->enable(mtd); + break; + } + if (new_state == FL_PM_SUSPENDED) { + spin_unlock(&this->chip_lock); + return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN; + } + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&this->wq, &wait); + spin_unlock(&this->chip_lock); + schedule(); + remove_wait_queue(&this->wq, &wait); + } + + return 0; +} + +/** + * onenand_release_device - [GENERIC] release chip + * @param mtd MTD device structure + * + * Deselect, release chip lock and wake up anyone waiting on the device + */ +static void onenand_release_device(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + if (this->state != FL_PM_SUSPENDED && this->disable) + this->disable(mtd); + /* Release the chip */ + spin_lock(&this->chip_lock); + this->state = FL_READY; + wake_up(&this->wq); + spin_unlock(&this->chip_lock); +} + +/** + * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer + * @param mtd MTD device structure + * @param buf destination address + * @param column oob offset to read from + * @param thislen oob length to read + */ +static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column, + int thislen) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + this->read_bufferram(mtd, ONENAND_SPARERAM, this->oob_buf, 0, + mtd->oobsize); + ret = mtd_ooblayout_get_databytes(mtd, buf, this->oob_buf, + column, thislen); + if (ret) + return ret; + + return 0; +} + +/** + * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data + * @param mtd MTD device structure + * @param addr address to recover + * @param status return value from onenand_wait / onenand_bbt_wait + * + * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has + * lower page address and MSB page has higher page address in paired pages. + * If power off occurs during MSB page program, the paired LSB page data can + * become corrupt. LSB page recovery read is a way to read LSB page though page + * data are corrupted. When uncorrectable error occurs as a result of LSB page + * read after power up, issue LSB page recovery read. + */ +static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status) +{ + struct onenand_chip *this = mtd->priv; + int i; + + /* Recovery is only for Flex-OneNAND */ + if (!FLEXONENAND(this)) + return status; + + /* check if we failed due to uncorrectable error */ + if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR) + return status; + + /* check if address lies in MLC region */ + i = flexonenand_region(mtd, addr); + if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift)) + return status; + + /* We are attempting to reread, so decrement stats.failed + * which was incremented by onenand_wait due to read failure + */ + printk(KERN_INFO "%s: Attempting to recover from uncorrectable read\n", + __func__); + mtd->ecc_stats.failed--; + + /* Issue the LSB page recovery command */ + this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize); + return this->wait(mtd, FL_READING); +} + +/** + * onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param ops: oob operation description structure + * + * MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram. + * So, read-while-load is not present. + */ +static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + struct mtd_ecc_stats stats; + size_t len = ops->len; + size_t ooblen = ops->ooblen; + u_char *buf = ops->datbuf; + u_char *oobbuf = ops->oobbuf; + int read = 0, column, thislen; + int oobread = 0, oobcolumn, thisooblen, oobsize; + int ret = 0; + int writesize = this->writesize; + + pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from, + (int)len); + + oobsize = mtd_oobavail(mtd, ops); + oobcolumn = from & (mtd->oobsize - 1); + + /* Do not allow reads past end of device */ + if (from + len > mtd->size) { + printk(KERN_ERR "%s: Attempt read beyond end of device\n", + __func__); + ops->retlen = 0; + ops->oobretlen = 0; + return -EINVAL; + } + + stats = mtd->ecc_stats; + + while (read < len) { + cond_resched(); + + thislen = min_t(int, writesize, len - read); + + column = from & (writesize - 1); + if (column + thislen > writesize) + thislen = writesize - column; + + if (!onenand_check_bufferram(mtd, from)) { + this->command(mtd, ONENAND_CMD_READ, from, writesize); + + ret = this->wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + onenand_update_bufferram(mtd, from, !ret); + if (mtd_is_eccerr(ret)) + ret = 0; + if (ret) + break; + } + + this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen); + if (oobbuf) { + thisooblen = oobsize - oobcolumn; + thisooblen = min_t(int, thisooblen, ooblen - oobread); + + if (ops->mode == MTD_OPS_AUTO_OOB) + onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen); + else + this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen); + oobread += thisooblen; + oobbuf += thisooblen; + oobcolumn = 0; + } + + read += thislen; + if (read == len) + break; + + from += thislen; + buf += thislen; + } + + /* + * Return success, if no ECC failures, else -EBADMSG + * fs driver will take care of that, because + * retlen == desired len and result == -EBADMSG + */ + ops->retlen = read; + ops->oobretlen = oobread; + + if (ret) + return ret; + + if (mtd->ecc_stats.failed - stats.failed) + return -EBADMSG; + + /* return max bitflips per ecc step; ONENANDs correct 1 bit only */ + return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0; +} + +/** + * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param ops: oob operation description structure + * + * OneNAND read main and/or out-of-band data + */ +static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + struct mtd_ecc_stats stats; + size_t len = ops->len; + size_t ooblen = ops->ooblen; + u_char *buf = ops->datbuf; + u_char *oobbuf = ops->oobbuf; + int read = 0, column, thislen; + int oobread = 0, oobcolumn, thisooblen, oobsize; + int ret = 0, boundary = 0; + int writesize = this->writesize; + + pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from, + (int)len); + + oobsize = mtd_oobavail(mtd, ops); + oobcolumn = from & (mtd->oobsize - 1); + + /* Do not allow reads past end of device */ + if ((from + len) > mtd->size) { + printk(KERN_ERR "%s: Attempt read beyond end of device\n", + __func__); + ops->retlen = 0; + ops->oobretlen = 0; + return -EINVAL; + } + + stats = mtd->ecc_stats; + + /* Read-while-load method */ + + /* Do first load to bufferRAM */ + if (read < len) { + if (!onenand_check_bufferram(mtd, from)) { + this->command(mtd, ONENAND_CMD_READ, from, writesize); + ret = this->wait(mtd, FL_READING); + onenand_update_bufferram(mtd, from, !ret); + if (mtd_is_eccerr(ret)) + ret = 0; + } + } + + thislen = min_t(int, writesize, len - read); + column = from & (writesize - 1); + if (column + thislen > writesize) + thislen = writesize - column; + + while (!ret) { + /* If there is more to load then start next load */ + from += thislen; + if (read + thislen < len) { + this->command(mtd, ONENAND_CMD_READ, from, writesize); + /* + * Chip boundary handling in DDP + * Now we issued chip 1 read and pointed chip 1 + * bufferram so we have to point chip 0 bufferram. + */ + if (ONENAND_IS_DDP(this) && + unlikely(from == (this->chipsize >> 1))) { + this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2); + boundary = 1; + } else + boundary = 0; + ONENAND_SET_PREV_BUFFERRAM(this); + } + /* While load is going, read from last bufferRAM */ + this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen); + + /* Read oob area if needed */ + if (oobbuf) { + thisooblen = oobsize - oobcolumn; + thisooblen = min_t(int, thisooblen, ooblen - oobread); + + if (ops->mode == MTD_OPS_AUTO_OOB) + onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen); + else + this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen); + oobread += thisooblen; + oobbuf += thisooblen; + oobcolumn = 0; + } + + /* See if we are done */ + read += thislen; + if (read == len) + break; + /* Set up for next read from bufferRAM */ + if (unlikely(boundary)) + this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2); + ONENAND_SET_NEXT_BUFFERRAM(this); + buf += thislen; + thislen = min_t(int, writesize, len - read); + column = 0; + cond_resched(); + /* Now wait for load */ + ret = this->wait(mtd, FL_READING); + onenand_update_bufferram(mtd, from, !ret); + if (mtd_is_eccerr(ret)) + ret = 0; + } + + /* + * Return success, if no ECC failures, else -EBADMSG + * fs driver will take care of that, because + * retlen == desired len and result == -EBADMSG + */ + ops->retlen = read; + ops->oobretlen = oobread; + + if (ret) + return ret; + + if (mtd->ecc_stats.failed - stats.failed) + return -EBADMSG; + + /* return max bitflips per ecc step; ONENANDs correct 1 bit only */ + return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0; +} + +/** + * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param ops: oob operation description structure + * + * OneNAND read out-of-band data from the spare area + */ +static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + struct mtd_ecc_stats stats; + int read = 0, thislen, column, oobsize; + size_t len = ops->ooblen; + unsigned int mode = ops->mode; + u_char *buf = ops->oobbuf; + int ret = 0, readcmd; + + from += ops->ooboffs; + + pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from, + (int)len); + + /* Initialize return length value */ + ops->oobretlen = 0; + + if (mode == MTD_OPS_AUTO_OOB) + oobsize = mtd->oobavail; + else + oobsize = mtd->oobsize; + + column = from & (mtd->oobsize - 1); + + if (unlikely(column >= oobsize)) { + printk(KERN_ERR "%s: Attempted to start read outside oob\n", + __func__); + return -EINVAL; + } + + stats = mtd->ecc_stats; + + readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + + while (read < len) { + cond_resched(); + + thislen = oobsize - column; + thislen = min_t(int, thislen, len); + + this->command(mtd, readcmd, from, mtd->oobsize); + + onenand_update_bufferram(mtd, from, 0); + + ret = this->wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + + if (ret && !mtd_is_eccerr(ret)) { + printk(KERN_ERR "%s: read failed = 0x%x\n", + __func__, ret); + break; + } + + if (mode == MTD_OPS_AUTO_OOB) + onenand_transfer_auto_oob(mtd, buf, column, thislen); + else + this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); + + read += thislen; + + if (read == len) + break; + + buf += thislen; + + /* Read more? */ + if (read < len) { + /* Page size */ + from += mtd->writesize; + column = 0; + } + } + + ops->oobretlen = read; + + if (ret) + return ret; + + if (mtd->ecc_stats.failed - stats.failed) + return -EBADMSG; + + return 0; +} + +/** + * onenand_read_oob - [MTD Interface] Read main and/or out-of-band + * @param mtd: MTD device structure + * @param from: offset to read from + * @param ops: oob operation description structure + + * Read main and/or out-of-band + */ +static int onenand_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + switch (ops->mode) { + case MTD_OPS_PLACE_OOB: + case MTD_OPS_AUTO_OOB: + break; + case MTD_OPS_RAW: + /* Not implemented yet */ + default: + return -EINVAL; + } + + onenand_get_device(mtd, FL_READING); + if (ops->datbuf) + ret = ONENAND_IS_4KB_PAGE(this) ? + onenand_mlc_read_ops_nolock(mtd, from, ops) : + onenand_read_ops_nolock(mtd, from, ops); + else + ret = onenand_read_oob_nolock(mtd, from, ops); + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_bbt_wait - [DEFAULT] wait until the command is done + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Wait for command done. + */ +static int onenand_bbt_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip *this = mtd->priv; + unsigned long timeout; + unsigned int interrupt, ctrl, ecc, addr1, addr8; + + /* The 20 msec is enough */ + timeout = jiffies + msecs_to_jiffies(20); + while (time_before(jiffies, timeout)) { + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + if (interrupt & ONENAND_INT_MASTER) + break; + } + /* To get correct interrupt status in timeout case */ + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + addr1 = this->read_word(this->base + ONENAND_REG_START_ADDRESS1); + addr8 = this->read_word(this->base + ONENAND_REG_START_ADDRESS8); + + if (interrupt & ONENAND_INT_READ) { + ecc = onenand_read_ecc(this); + if (ecc & ONENAND_ECC_2BIT_ALL) { + printk(KERN_DEBUG "%s: ecc 0x%04x ctrl 0x%04x " + "intr 0x%04x addr1 %#x addr8 %#x\n", + __func__, ecc, ctrl, interrupt, addr1, addr8); + return ONENAND_BBT_READ_ECC_ERROR; + } + } else { + printk(KERN_ERR "%s: read timeout! ctrl 0x%04x " + "intr 0x%04x addr1 %#x addr8 %#x\n", + __func__, ctrl, interrupt, addr1, addr8); + return ONENAND_BBT_READ_FATAL_ERROR; + } + + /* Initial bad block case: 0x2400 or 0x0400 */ + if (ctrl & ONENAND_CTRL_ERROR) { + printk(KERN_DEBUG "%s: ctrl 0x%04x intr 0x%04x addr1 %#x " + "addr8 %#x\n", __func__, ctrl, interrupt, addr1, addr8); + return ONENAND_BBT_READ_ERROR; + } + + return 0; +} + +/** + * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan + * @param mtd MTD device structure + * @param from offset to read from + * @param ops oob operation description structure + * + * OneNAND read out-of-band data from the spare area for bbt scan + */ +int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + int read = 0, thislen, column; + int ret = 0, readcmd; + size_t len = ops->ooblen; + u_char *buf = ops->oobbuf; + + pr_debug("%s: from = 0x%08x, len = %zi\n", __func__, (unsigned int)from, + len); + + /* Initialize return value */ + ops->oobretlen = 0; + + /* Do not allow reads past end of device */ + if (unlikely((from + len) > mtd->size)) { + printk(KERN_ERR "%s: Attempt read beyond end of device\n", + __func__); + return ONENAND_BBT_READ_FATAL_ERROR; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_READING); + + column = from & (mtd->oobsize - 1); + + readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + + while (read < len) { + cond_resched(); + + thislen = mtd->oobsize - column; + thislen = min_t(int, thislen, len); + + this->command(mtd, readcmd, from, mtd->oobsize); + + onenand_update_bufferram(mtd, from, 0); + + ret = this->bbt_wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + + if (ret) + break; + + this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); + read += thislen; + if (read == len) + break; + + buf += thislen; + + /* Read more? */ + if (read < len) { + /* Update Page size */ + from += this->writesize; + column = 0; + } + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + ops->oobretlen = read; + return ret; +} + +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE +/** + * onenand_verify_oob - [GENERIC] verify the oob contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param to offset to read from + */ +static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to) +{ + struct onenand_chip *this = mtd->priv; + u_char *oob_buf = this->oob_buf; + int status, i, readcmd; + + readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + + this->command(mtd, readcmd, to, mtd->oobsize); + onenand_update_bufferram(mtd, to, 0); + status = this->wait(mtd, FL_READING); + if (status) + return status; + + this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); + for (i = 0; i < mtd->oobsize; i++) + if (buf[i] != 0xFF && buf[i] != oob_buf[i]) + return -EBADMSG; + + return 0; +} + +/** + * onenand_verify - [GENERIC] verify the chip contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param addr offset to read from + * @param len number of bytes to read and compare + */ +static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len) +{ + struct onenand_chip *this = mtd->priv; + int ret = 0; + int thislen, column; + + column = addr & (this->writesize - 1); + + while (len != 0) { + thislen = min_t(int, this->writesize - column, len); + + this->command(mtd, ONENAND_CMD_READ, addr, this->writesize); + + onenand_update_bufferram(mtd, addr, 0); + + ret = this->wait(mtd, FL_READING); + if (ret) + return ret; + + onenand_update_bufferram(mtd, addr, 1); + + this->read_bufferram(mtd, ONENAND_DATARAM, this->verify_buf, 0, mtd->writesize); + + if (memcmp(buf, this->verify_buf + column, thislen)) + return -EBADMSG; + + len -= thislen; + buf += thislen; + addr += thislen; + column = 0; + } + + return 0; +} +#else +#define onenand_verify(...) (0) +#define onenand_verify_oob(...) (0) +#endif + +#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0) + +static void onenand_panic_wait(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + unsigned int interrupt; + int i; + + for (i = 0; i < 2000; i++) { + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + if (interrupt & ONENAND_INT_MASTER) + break; + udelay(10); + } +} + +/** + * onenand_panic_write - [MTD Interface] write buffer to FLASH in a panic context + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * Write with ECC + */ +static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int column, subpage; + int written = 0; + + if (this->state == FL_PM_SUSPENDED) + return -EBUSY; + + /* Wait for any existing operation to clear */ + onenand_panic_wait(mtd); + + pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to, + (int)len); + + /* Reject writes, which are not page aligned */ + if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { + printk(KERN_ERR "%s: Attempt to write not page aligned data\n", + __func__); + return -EINVAL; + } + + column = to & (mtd->writesize - 1); + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, mtd->writesize - column, len - written); + u_char *wbuf = (u_char *) buf; + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen); + + /* Partial page write */ + subpage = thislen < mtd->writesize; + if (subpage) { + memset(this->page_buf, 0xff, mtd->writesize); + memcpy(this->page_buf + column, buf, thislen); + wbuf = this->page_buf; + } + + this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize); + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); + + this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); + + onenand_panic_wait(mtd); + + /* In partial page write we don't update bufferram */ + onenand_update_bufferram(mtd, to, !subpage); + if (ONENAND_IS_2PLANE(this)) { + ONENAND_SET_BUFFERRAM1(this); + onenand_update_bufferram(mtd, to + this->writesize, !subpage); + } + + written += thislen; + + if (written == len) + break; + + column = 0; + to += thislen; + buf += thislen; + } + + *retlen = written; + return 0; +} + +/** + * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer + * @param mtd MTD device structure + * @param oob_buf oob buffer + * @param buf source address + * @param column oob offset to write to + * @param thislen oob length to write + */ +static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, + const u_char *buf, int column, int thislen) +{ + return mtd_ooblayout_set_databytes(mtd, buf, oob_buf, column, thislen); +} + +/** + * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param ops oob operation description structure + * + * Write main and/or oob with ECC + */ +static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + int written = 0, column, thislen = 0, subpage = 0; + int prev = 0, prevlen = 0, prev_subpage = 0, first = 1; + int oobwritten = 0, oobcolumn, thisooblen, oobsize; + size_t len = ops->len; + size_t ooblen = ops->ooblen; + const u_char *buf = ops->datbuf; + const u_char *oob = ops->oobbuf; + u_char *oobbuf; + int ret = 0, cmd; + + pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to, + (int)len); + + /* Initialize retlen, in case of early exit */ + ops->retlen = 0; + ops->oobretlen = 0; + + /* Reject writes, which are not page aligned */ + if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { + printk(KERN_ERR "%s: Attempt to write not page aligned data\n", + __func__); + return -EINVAL; + } + + /* Check zero length */ + if (!len) + return 0; + oobsize = mtd_oobavail(mtd, ops); + oobcolumn = to & (mtd->oobsize - 1); + + column = to & (mtd->writesize - 1); + + /* Loop until all data write */ + while (1) { + if (written < len) { + u_char *wbuf = (u_char *) buf; + + thislen = min_t(int, mtd->writesize - column, len - written); + thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten); + + cond_resched(); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen); + + /* Partial page write */ + subpage = thislen < mtd->writesize; + if (subpage) { + memset(this->page_buf, 0xff, mtd->writesize); + memcpy(this->page_buf + column, buf, thislen); + wbuf = this->page_buf; + } + + this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize); + + if (oob) { + oobbuf = this->oob_buf; + + /* We send data to spare ram with oobsize + * to prevent byte access */ + memset(oobbuf, 0xff, mtd->oobsize); + if (ops->mode == MTD_OPS_AUTO_OOB) + onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen); + else + memcpy(oobbuf + oobcolumn, oob, thisooblen); + + oobwritten += thisooblen; + oob += thisooblen; + oobcolumn = 0; + } else + oobbuf = (u_char *) ffchars; + + this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); + } else + ONENAND_SET_NEXT_BUFFERRAM(this); + + /* + * 2 PLANE, MLC, and Flex-OneNAND do not support + * write-while-program feature. + */ + if (!ONENAND_IS_2PLANE(this) && !ONENAND_IS_4KB_PAGE(this) && !first) { + ONENAND_SET_PREV_BUFFERRAM(this); + + ret = this->wait(mtd, FL_WRITING); + + /* In partial page write we don't update bufferram */ + onenand_update_bufferram(mtd, prev, !ret && !prev_subpage); + if (ret) { + written -= prevlen; + printk(KERN_ERR "%s: write failed %d\n", + __func__, ret); + break; + } + + if (written == len) { + /* Only check verify write turn on */ + ret = onenand_verify(mtd, buf - len, to - len, len); + if (ret) + printk(KERN_ERR "%s: verify failed %d\n", + __func__, ret); + break; + } + + ONENAND_SET_NEXT_BUFFERRAM(this); + } + + this->ongoing = 0; + cmd = ONENAND_CMD_PROG; + + /* Exclude 1st OTP and OTP blocks for cache program feature */ + if (ONENAND_IS_CACHE_PROGRAM(this) && + likely(onenand_block(this, to) != 0) && + ONENAND_IS_4KB_PAGE(this) && + ((written + thislen) < len)) { + cmd = ONENAND_CMD_2X_CACHE_PROG; + this->ongoing = 1; + } + + this->command(mtd, cmd, to, mtd->writesize); + + /* + * 2 PLANE, MLC, and Flex-OneNAND wait here + */ + if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this)) { + ret = this->wait(mtd, FL_WRITING); + + /* In partial page write we don't update bufferram */ + onenand_update_bufferram(mtd, to, !ret && !subpage); + if (ret) { + printk(KERN_ERR "%s: write failed %d\n", + __func__, ret); + break; + } + + /* Only check verify write turn on */ + ret = onenand_verify(mtd, buf, to, thislen); + if (ret) { + printk(KERN_ERR "%s: verify failed %d\n", + __func__, ret); + break; + } + + written += thislen; + + if (written == len) + break; + + } else + written += thislen; + + column = 0; + prev_subpage = subpage; + prev = to; + prevlen = thislen; + to += thislen; + buf += thislen; + first = 0; + } + + /* In error case, clear all bufferrams */ + if (written != len) + onenand_invalidate_bufferram(mtd, 0, -1); + + ops->retlen = written; + ops->oobretlen = oobwritten; + + return ret; +} + + +/** + * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * @param mode operation mode + * + * OneNAND write out-of-band + */ +static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + int column, ret = 0, oobsize; + int written = 0, oobcmd; + u_char *oobbuf; + size_t len = ops->ooblen; + const u_char *buf = ops->oobbuf; + unsigned int mode = ops->mode; + + to += ops->ooboffs; + + pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to, + (int)len); + + /* Initialize retlen, in case of early exit */ + ops->oobretlen = 0; + + if (mode == MTD_OPS_AUTO_OOB) + oobsize = mtd->oobavail; + else + oobsize = mtd->oobsize; + + column = to & (mtd->oobsize - 1); + + if (unlikely(column >= oobsize)) { + printk(KERN_ERR "%s: Attempted to start write outside oob\n", + __func__); + return -EINVAL; + } + + /* For compatibility with NAND: Do not allow write past end of page */ + if (unlikely(column + len > oobsize)) { + printk(KERN_ERR "%s: Attempt to write past end of page\n", + __func__); + return -EINVAL; + } + + oobbuf = this->oob_buf; + + oobcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB; + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, oobsize, len - written); + + cond_resched(); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); + + /* We send data to spare ram with oobsize + * to prevent byte access */ + memset(oobbuf, 0xff, mtd->oobsize); + if (mode == MTD_OPS_AUTO_OOB) + onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen); + else + memcpy(oobbuf + column, buf, thislen); + this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); + + if (ONENAND_IS_4KB_PAGE(this)) { + /* Set main area of DataRAM to 0xff*/ + memset(this->page_buf, 0xff, mtd->writesize); + this->write_bufferram(mtd, ONENAND_DATARAM, + this->page_buf, 0, mtd->writesize); + } + + this->command(mtd, oobcmd, to, mtd->oobsize); + + onenand_update_bufferram(mtd, to, 0); + if (ONENAND_IS_2PLANE(this)) { + ONENAND_SET_BUFFERRAM1(this); + onenand_update_bufferram(mtd, to + this->writesize, 0); + } + + ret = this->wait(mtd, FL_WRITING); + if (ret) { + printk(KERN_ERR "%s: write failed %d\n", __func__, ret); + break; + } + + ret = onenand_verify_oob(mtd, oobbuf, to); + if (ret) { + printk(KERN_ERR "%s: verify failed %d\n", + __func__, ret); + break; + } + + written += thislen; + if (written == len) + break; + + to += mtd->writesize; + buf += thislen; + column = 0; + } + + ops->oobretlen = written; + + return ret; +} + +/** + * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band + * @param mtd: MTD device structure + * @param to: offset to write + * @param ops: oob operation description structure + */ +static int onenand_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + int ret; + + switch (ops->mode) { + case MTD_OPS_PLACE_OOB: + case MTD_OPS_AUTO_OOB: + break; + case MTD_OPS_RAW: + /* Not implemented yet */ + default: + return -EINVAL; + } + + onenand_get_device(mtd, FL_WRITING); + if (ops->datbuf) + ret = onenand_write_ops_nolock(mtd, to, ops); + else + ret = onenand_write_oob_nolock(mtd, to, ops); + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad + * @param mtd MTD device structure + * @param ofs offset from device start + * @param allowbbt 1, if its allowed to access the bbt area + * + * Check, if the block is bad. Either by reading the bad block table or + * calling of the scan function. + */ +static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + + /* Return info from the table */ + return bbm->isbad_bbt(mtd, ofs, allowbbt); +} + + +static int onenand_multiblock_erase_verify(struct mtd_info *mtd, + struct erase_info *instr) +{ + struct onenand_chip *this = mtd->priv; + loff_t addr = instr->addr; + int len = instr->len; + unsigned int block_size = (1 << this->erase_shift); + int ret = 0; + + while (len) { + this->command(mtd, ONENAND_CMD_ERASE_VERIFY, addr, block_size); + ret = this->wait(mtd, FL_VERIFYING_ERASE); + if (ret) { + printk(KERN_ERR "%s: Failed verify, block %d\n", + __func__, onenand_block(this, addr)); + instr->fail_addr = addr; + return -1; + } + len -= block_size; + addr += block_size; + } + return 0; +} + +/** + * onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase + * @param mtd MTD device structure + * @param instr erase instruction + * @param region erase region + * + * Erase one or more blocks up to 64 block at a time + */ +static int onenand_multiblock_erase(struct mtd_info *mtd, + struct erase_info *instr, + unsigned int block_size) +{ + struct onenand_chip *this = mtd->priv; + loff_t addr = instr->addr; + int len = instr->len; + int eb_count = 0; + int ret = 0; + int bdry_block = 0; + + if (ONENAND_IS_DDP(this)) { + loff_t bdry_addr = this->chipsize >> 1; + if (addr < bdry_addr && (addr + len) > bdry_addr) + bdry_block = bdry_addr >> this->erase_shift; + } + + /* Pre-check bbs */ + while (len) { + /* Check if we have a bad block, we do not erase bad blocks */ + if (onenand_block_isbad_nolock(mtd, addr, 0)) { + printk(KERN_WARNING "%s: attempt to erase a bad block " + "at addr 0x%012llx\n", + __func__, (unsigned long long) addr); + return -EIO; + } + len -= block_size; + addr += block_size; + } + + len = instr->len; + addr = instr->addr; + + /* loop over 64 eb batches */ + while (len) { + struct erase_info verify_instr = *instr; + int max_eb_count = MB_ERASE_MAX_BLK_COUNT; + + verify_instr.addr = addr; + verify_instr.len = 0; + + /* do not cross chip boundary */ + if (bdry_block) { + int this_block = (addr >> this->erase_shift); + + if (this_block < bdry_block) { + max_eb_count = min(max_eb_count, + (bdry_block - this_block)); + } + } + + eb_count = 0; + + while (len > block_size && eb_count < (max_eb_count - 1)) { + this->command(mtd, ONENAND_CMD_MULTIBLOCK_ERASE, + addr, block_size); + onenand_invalidate_bufferram(mtd, addr, block_size); + + ret = this->wait(mtd, FL_PREPARING_ERASE); + if (ret) { + printk(KERN_ERR "%s: Failed multiblock erase, " + "block %d\n", __func__, + onenand_block(this, addr)); + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; + return -EIO; + } + + len -= block_size; + addr += block_size; + eb_count++; + } + + /* last block of 64-eb series */ + cond_resched(); + this->command(mtd, ONENAND_CMD_ERASE, addr, block_size); + onenand_invalidate_bufferram(mtd, addr, block_size); + + ret = this->wait(mtd, FL_ERASING); + /* Check if it is write protected */ + if (ret) { + printk(KERN_ERR "%s: Failed erase, block %d\n", + __func__, onenand_block(this, addr)); + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; + return -EIO; + } + + len -= block_size; + addr += block_size; + eb_count++; + + /* verify */ + verify_instr.len = eb_count * block_size; + if (onenand_multiblock_erase_verify(mtd, &verify_instr)) { + instr->fail_addr = verify_instr.fail_addr; + return -EIO; + } + + } + return 0; +} + + +/** + * onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase + * @param mtd MTD device structure + * @param instr erase instruction + * @param region erase region + * @param block_size erase block size + * + * Erase one or more blocks one block at a time + */ +static int onenand_block_by_block_erase(struct mtd_info *mtd, + struct erase_info *instr, + struct mtd_erase_region_info *region, + unsigned int block_size) +{ + struct onenand_chip *this = mtd->priv; + loff_t addr = instr->addr; + int len = instr->len; + loff_t region_end = 0; + int ret = 0; + + if (region) { + /* region is set for Flex-OneNAND */ + region_end = region->offset + region->erasesize * region->numblocks; + } + + /* Loop through the blocks */ + while (len) { + cond_resched(); + + /* Check if we have a bad block, we do not erase bad blocks */ + if (onenand_block_isbad_nolock(mtd, addr, 0)) { + printk(KERN_WARNING "%s: attempt to erase a bad block " + "at addr 0x%012llx\n", + __func__, (unsigned long long) addr); + return -EIO; + } + + this->command(mtd, ONENAND_CMD_ERASE, addr, block_size); + + onenand_invalidate_bufferram(mtd, addr, block_size); + + ret = this->wait(mtd, FL_ERASING); + /* Check, if it is write protected */ + if (ret) { + printk(KERN_ERR "%s: Failed erase, block %d\n", + __func__, onenand_block(this, addr)); + instr->fail_addr = addr; + return -EIO; + } + + len -= block_size; + addr += block_size; + + if (region && addr == region_end) { + if (!len) + break; + region++; + + block_size = region->erasesize; + region_end = region->offset + region->erasesize * region->numblocks; + + if (len & (block_size - 1)) { + /* FIXME: This should be handled at MTD partitioning level. */ + printk(KERN_ERR "%s: Unaligned address\n", + __func__); + return -EIO; + } + } + } + return 0; +} + +/** + * onenand_erase - [MTD Interface] erase block(s) + * @param mtd MTD device structure + * @param instr erase instruction + * + * Erase one or more blocks + */ +static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct onenand_chip *this = mtd->priv; + unsigned int block_size; + loff_t addr = instr->addr; + loff_t len = instr->len; + int ret = 0; + struct mtd_erase_region_info *region = NULL; + loff_t region_offset = 0; + + pr_debug("%s: start=0x%012llx, len=%llu\n", __func__, + (unsigned long long)instr->addr, + (unsigned long long)instr->len); + + if (FLEXONENAND(this)) { + /* Find the eraseregion of this address */ + int i = flexonenand_region(mtd, addr); + + region = &mtd->eraseregions[i]; + block_size = region->erasesize; + + /* Start address within region must align on block boundary. + * Erase region's start offset is always block start address. + */ + region_offset = region->offset; + } else + block_size = 1 << this->erase_shift; + + /* Start address must align on block boundary */ + if (unlikely((addr - region_offset) & (block_size - 1))) { + printk(KERN_ERR "%s: Unaligned address\n", __func__); + return -EINVAL; + } + + /* Length must align on block boundary */ + if (unlikely(len & (block_size - 1))) { + printk(KERN_ERR "%s: Length not block aligned\n", __func__); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_ERASING); + + if (ONENAND_IS_4KB_PAGE(this) || region || + instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) { + /* region is set for Flex-OneNAND (no mb erase) */ + ret = onenand_block_by_block_erase(mtd, instr, + region, block_size); + } else { + ret = onenand_multiblock_erase(mtd, instr, block_size); + } + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_sync - [MTD Interface] sync + * @param mtd MTD device structure + * + * Sync is actually a wait for chip ready function + */ +static void onenand_sync(struct mtd_info *mtd) +{ + pr_debug("%s: called\n", __func__); + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_SYNCING); + + /* Release it and go back */ + onenand_release_device(mtd); +} + +/** + * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * + * Check whether the block is bad + */ +static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + int ret; + + onenand_get_device(mtd, FL_READING); + ret = onenand_block_isbad_nolock(mtd, ofs, 0); + onenand_release_device(mtd); + return ret; +} + +/** + * onenand_default_block_markbad - [DEFAULT] mark a block bad + * @param mtd MTD device structure + * @param ofs offset from device start + * + * This is the default implementation, which can be overridden by + * a hardware specific driver. + */ +static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + struct onenand_chip *this = mtd->priv; + struct bbm_info *bbm = this->bbm; + u_char buf[2] = {0, 0}; + struct mtd_oob_ops ops = { + .mode = MTD_OPS_PLACE_OOB, + .ooblen = 2, + .oobbuf = buf, + .ooboffs = 0, + }; + int block; + + /* Get block number */ + block = onenand_block(this, ofs); + if (bbm->bbt) + bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); + + /* We write two bytes, so we don't have to mess with 16-bit access */ + ofs += mtd->oobsize + (bbm->badblockpos & ~0x01); + /* FIXME : What to do when marking SLC block in partition + * with MLC erasesize? For now, it is not advisable to + * create partitions containing both SLC and MLC regions. + */ + return onenand_write_oob_nolock(mtd, ofs, &ops); +} + +/** + * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * + * Mark the block as bad + */ +static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + ret = onenand_block_isbad(mtd, ofs); + if (ret) { + /* If it was bad already, return success and do nothing */ + if (ret > 0) + return 0; + return ret; + } + + onenand_get_device(mtd, FL_WRITING); + ret = this->block_markbad(mtd, ofs); + onenand_release_device(mtd); + return ret; +} + +/** + * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s) + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * @param len number of bytes to lock or unlock + * @param cmd lock or unlock command + * + * Lock or unlock one or more blocks + */ +static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd) +{ + struct onenand_chip *this = mtd->priv; + int start, end, block, value, status; + int wp_status_mask; + + start = onenand_block(this, ofs); + end = onenand_block(this, ofs + len) - 1; + + if (cmd == ONENAND_CMD_LOCK) + wp_status_mask = ONENAND_WP_LS; + else + wp_status_mask = ONENAND_WP_US; + + /* Continuous lock scheme */ + if (this->options & ONENAND_HAS_CONT_LOCK) { + /* Set start block address */ + this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Set end block address */ + this->write_word(end, this->base + ONENAND_REG_END_BLOCK_ADDRESS); + /* Write lock command */ + this->command(mtd, cmd, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_LOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & wp_status_mask)) + printk(KERN_ERR "%s: wp status = 0x%x\n", + __func__, status); + + return 0; + } + + /* Block lock scheme */ + for (block = start; block < end + 1; block++) { + /* Set block address */ + value = onenand_block_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + /* Set start block address */ + this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Write lock command */ + this->command(mtd, cmd, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_LOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & wp_status_mask)) + printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n", + __func__, block, status); + } + + return 0; +} + +/** + * onenand_lock - [MTD Interface] Lock block(s) + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * @param len number of bytes to unlock + * + * Lock one or more blocks + */ +static int onenand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + int ret; + + onenand_get_device(mtd, FL_LOCKING); + ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK); + onenand_release_device(mtd); + return ret; +} + +/** + * onenand_unlock - [MTD Interface] Unlock block(s) + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * @param len number of bytes to unlock + * + * Unlock one or more blocks + */ +static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + int ret; + + onenand_get_device(mtd, FL_LOCKING); + ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK); + onenand_release_device(mtd); + return ret; +} + +/** + * onenand_check_lock_status - [OneNAND Interface] Check lock status + * @param this onenand chip data structure + * + * Check lock status + */ +static int onenand_check_lock_status(struct onenand_chip *this) +{ + unsigned int value, block, status; + unsigned int end; + + end = this->chipsize >> this->erase_shift; + for (block = 0; block < end; block++) { + /* Set block address */ + value = onenand_block_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + /* Set start block address */ + this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS); + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & ONENAND_WP_US)) { + printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n", + __func__, block, status); + return 0; + } + } + + return 1; +} + +/** + * onenand_unlock_all - [OneNAND Interface] unlock all blocks + * @param mtd MTD device structure + * + * Unlock all blocks + */ +static void onenand_unlock_all(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + loff_t ofs = 0; + loff_t len = mtd->size; + + if (this->options & ONENAND_HAS_UNLOCK_ALL) { + /* Set start block address */ + this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Write unlock command */ + this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_LOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Don't check lock status */ + if (this->options & ONENAND_SKIP_UNLOCK_CHECK) + return; + + /* Check lock status */ + if (onenand_check_lock_status(this)) + return; + + /* Workaround for all block unlock in DDP */ + if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) { + /* All blocks on another chip */ + ofs = this->chipsize >> 1; + len = this->chipsize >> 1; + } + } + + onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK); +} + +#ifdef CONFIG_MTD_ONENAND_OTP + +/** + * onenand_otp_command - Send OTP specific command to OneNAND device + * @param mtd MTD device structure + * @param cmd the command to be sent + * @param addr offset to read from or write to + * @param len number of bytes to read or write + */ +static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr, + size_t len) +{ + struct onenand_chip *this = mtd->priv; + int value, block, page; + + /* Address translation */ + switch (cmd) { + case ONENAND_CMD_OTP_ACCESS: + block = (int) (addr >> this->erase_shift); + page = -1; + break; + + default: + block = (int) (addr >> this->erase_shift); + page = (int) (addr >> this->page_shift); + + if (ONENAND_IS_2PLANE(this)) { + /* Make the even block number */ + block &= ~1; + /* Is it the odd plane? */ + if (addr & this->writesize) + block++; + page >>= 1; + } + page &= this->page_mask; + break; + } + + if (block != -1) { + /* Write 'DFS, FBA' of Flash */ + value = onenand_block_address(this, block); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS1); + } + + if (page != -1) { + /* Now we use page size operation */ + int sectors = 4, count = 4; + int dataram; + + switch (cmd) { + default: + if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG) + cmd = ONENAND_CMD_2X_PROG; + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } + + /* Write 'FPA, FSA' of Flash */ + value = onenand_page_address(page, sectors); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS8); + + /* Write 'BSA, BSC' of DataRAM */ + value = onenand_buffer_address(dataram, sectors, count); + this->write_word(value, this->base + ONENAND_REG_START_BUFFER); + } + + /* Interrupt clear */ + this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT); + + /* Write command */ + this->write_word(cmd, this->base + ONENAND_REG_COMMAND); + + return 0; +} + +/** + * onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * OneNAND write out-of-band only for OTP + */ +static int onenand_otp_write_oob_nolock(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + int column, ret = 0, oobsize; + int written = 0; + u_char *oobbuf; + size_t len = ops->ooblen; + const u_char *buf = ops->oobbuf; + int block, value, status; + + to += ops->ooboffs; + + /* Initialize retlen, in case of early exit */ + ops->oobretlen = 0; + + oobsize = mtd->oobsize; + + column = to & (mtd->oobsize - 1); + + oobbuf = this->oob_buf; + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, oobsize, len - written); + + cond_resched(); + + block = (int) (to >> this->erase_shift); + /* + * Write 'DFS, FBA' of Flash + * Add: F100h DQ=DFS, FBA + */ + + value = onenand_block_address(this, block); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS1); + + /* + * Select DataRAM for DDP + * Add: F101h DQ=DBS + */ + + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS2); + ONENAND_SET_NEXT_BUFFERRAM(this); + + /* + * Enter OTP access mode + */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + /* We send data to spare ram with oobsize + * to prevent byte access */ + memcpy(oobbuf + column, buf, thislen); + + /* + * Write Data into DataRAM + * Add: 8th Word + * in sector0/spare/page0 + * DQ=XXFCh + */ + this->write_bufferram(mtd, ONENAND_SPARERAM, + oobbuf, 0, mtd->oobsize); + + onenand_otp_command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + onenand_update_bufferram(mtd, to, 0); + if (ONENAND_IS_2PLANE(this)) { + ONENAND_SET_BUFFERRAM1(this); + onenand_update_bufferram(mtd, to + this->writesize, 0); + } + + ret = this->wait(mtd, FL_WRITING); + if (ret) { + printk(KERN_ERR "%s: write failed %d\n", __func__, ret); + break; + } + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + status = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + status &= 0x60; + + if (status == 0x60) { + printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); + printk(KERN_DEBUG "1st Block\tLOCKED\n"); + printk(KERN_DEBUG "OTP Block\tLOCKED\n"); + } else if (status == 0x20) { + printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); + printk(KERN_DEBUG "1st Block\tLOCKED\n"); + printk(KERN_DEBUG "OTP Block\tUN-LOCKED\n"); + } else if (status == 0x40) { + printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); + printk(KERN_DEBUG "1st Block\tUN-LOCKED\n"); + printk(KERN_DEBUG "OTP Block\tLOCKED\n"); + } else { + printk(KERN_DEBUG "Reboot to check\n"); + } + + written += thislen; + if (written == len) + break; + + to += mtd->writesize; + buf += thislen; + column = 0; + } + + ops->oobretlen = written; + + return ret; +} + +/* Internal OTP operation */ +typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len, + size_t *retlen, u_char *buf); + +/** + * do_otp_read - [DEFAULT] Read OTP block area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of readbytes + * @param buf the databuffer to put/get data + * + * Read OTP block area. + */ +static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + struct mtd_oob_ops ops = { + .len = len, + .ooblen = 0, + .datbuf = buf, + .oobbuf = NULL, + }; + int ret; + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = ONENAND_IS_4KB_PAGE(this) ? + onenand_mlc_read_ops_nolock(mtd, from, &ops) : + onenand_read_ops_nolock(mtd, from, &ops); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_write - [DEFAULT] Write OTP block area + * @param mtd MTD device structure + * @param to The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write OTP block area. + */ +static int do_otp_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + unsigned char *pbuf = buf; + int ret; + struct mtd_oob_ops ops; + + /* Force buffer page aligned */ + if (len < mtd->writesize) { + memcpy(this->page_buf, buf, len); + memset(this->page_buf + len, 0xff, mtd->writesize - len); + pbuf = this->page_buf; + len = mtd->writesize; + } + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ops.len = len; + ops.ooblen = 0; + ops.datbuf = pbuf; + ops.oobbuf = NULL; + ret = onenand_write_ops_nolock(mtd, to, &ops); + *retlen = ops.retlen; + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_lock - [DEFAULT] Lock OTP block area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to lock + * @param retlen pointer to variable to store the number of lock bytes + * @param buf the databuffer to put/get data + * + * Lock OTP block area. + */ +static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + struct mtd_oob_ops ops; + int ret; + + if (FLEXONENAND(this)) { + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + /* + * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of + * main area of page 49. + */ + ops.len = mtd->writesize; + ops.ooblen = 0; + ops.datbuf = buf; + ops.oobbuf = NULL; + ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops); + *retlen = ops.retlen; + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + } else { + ops.mode = MTD_OPS_PLACE_OOB; + ops.ooblen = len; + ops.oobbuf = buf; + ops.ooboffs = 0; + ret = onenand_otp_write_oob_nolock(mtd, from, &ops); + *retlen = ops.oobretlen; + } + + return ret; +} + +/** + * onenand_otp_walk - [DEFAULT] Handle OTP operation + * @param mtd MTD device structure + * @param from The offset to read/write + * @param len number of bytes to read/write + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * @param action do given action + * @param mode specify user and factory + * + * Handle OTP operation. + */ +static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf, + otp_op_t action, int mode) +{ + struct onenand_chip *this = mtd->priv; + int otp_pages; + int density; + int ret = 0; + + *retlen = 0; + + density = onenand_get_density(this->device_id); + if (density < ONENAND_DEVICE_DENSITY_512Mb) + otp_pages = 20; + else + otp_pages = 50; + + if (mode == MTD_OTP_FACTORY) { + from += mtd->writesize * otp_pages; + otp_pages = ONENAND_PAGES_PER_BLOCK - otp_pages; + } + + /* Check User/Factory boundary */ + if (mode == MTD_OTP_USER) { + if (mtd->writesize * otp_pages < from + len) + return 0; + } else { + if (mtd->writesize * otp_pages < len) + return 0; + } + + onenand_get_device(mtd, FL_OTPING); + while (len > 0 && otp_pages > 0) { + if (!action) { /* OTP Info functions */ + struct otp_info *otpinfo; + + len -= sizeof(struct otp_info); + if (len <= 0) { + ret = -ENOSPC; + break; + } + + otpinfo = (struct otp_info *) buf; + otpinfo->start = from; + otpinfo->length = mtd->writesize; + otpinfo->locked = 0; + + from += mtd->writesize; + buf += sizeof(struct otp_info); + *retlen += sizeof(struct otp_info); + } else { + size_t tmp_retlen; + + ret = action(mtd, from, len, &tmp_retlen, buf); + if (ret) + break; + + buf += tmp_retlen; + len -= tmp_retlen; + *retlen += tmp_retlen; + + } + otp_pages--; + } + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info + * @param mtd MTD device structure + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read factory OTP info. + */ +static int onenand_get_fact_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) +{ + return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL, + MTD_OTP_FACTORY); +} + +/** + * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read factory OTP area. + */ +static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY); +} + +/** + * onenand_get_user_prot_info - [MTD Interface] Read user OTP info + * @param mtd MTD device structure + * @param retlen pointer to variable to store the number of read bytes + * @param len number of bytes to read + * @param buf the databuffer to put/get data + * + * Read user OTP info. + */ +static int onenand_get_user_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) +{ + return onenand_otp_walk(mtd, 0, len, retlen, (u_char *) buf, NULL, + MTD_OTP_USER); +} + +/** + * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read user OTP area. + */ +static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER); +} + +/** + * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area + * @param mtd MTD device structure + * @param from The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write user OTP area. + */ +static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER); +} + +/** + * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to unlock + * + * Write lock mark on spare area in page 0 in OTP block + */ +static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len) +{ + struct onenand_chip *this = mtd->priv; + u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf; + size_t retlen; + int ret; + unsigned int otp_lock_offset = ONENAND_OTP_LOCK_OFFSET; + + memset(buf, 0xff, FLEXONENAND(this) ? this->writesize + : mtd->oobsize); + /* + * Write lock mark to 8th word of sector0 of page0 of the spare0. + * We write 16 bytes spare area instead of 2 bytes. + * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of + * main area of page 49. + */ + + from = 0; + len = FLEXONENAND(this) ? mtd->writesize : 16; + + /* + * Note: OTP lock operation + * OTP block : 0xXXFC XX 1111 1100 + * 1st block : 0xXXF3 (If chip support) XX 1111 0011 + * Both : 0xXXF0 (If chip support) XX 1111 0000 + */ + if (FLEXONENAND(this)) + otp_lock_offset = FLEXONENAND_OTP_LOCK_OFFSET; + + /* ONENAND_OTP_AREA | ONENAND_OTP_BLOCK0 | ONENAND_OTP_AREA_BLOCK0 */ + if (otp == 1) + buf[otp_lock_offset] = 0xFC; + else if (otp == 2) + buf[otp_lock_offset] = 0xF3; + else if (otp == 3) + buf[otp_lock_offset] = 0xF0; + else if (otp != 0) + printk(KERN_DEBUG "[OneNAND] Invalid option selected for OTP\n"); + + ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER); + + return ret ? : retlen; +} + +#endif /* CONFIG_MTD_ONENAND_OTP */ + +/** + * onenand_check_features - Check and set OneNAND features + * @param mtd MTD data structure + * + * Check and set OneNAND features + * - lock scheme + * - two plane + */ +static void onenand_check_features(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + unsigned int density, process, numbufs; + + /* Lock scheme depends on density and process */ + density = onenand_get_density(this->device_id); + process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT; + numbufs = this->read_word(this->base + ONENAND_REG_NUM_BUFFERS) >> 8; + + /* Lock scheme */ + switch (density) { + case ONENAND_DEVICE_DENSITY_4Gb: + if (ONENAND_IS_DDP(this)) + this->options |= ONENAND_HAS_2PLANE; + else if (numbufs == 1) { + this->options |= ONENAND_HAS_4KB_PAGE; + this->options |= ONENAND_HAS_CACHE_PROGRAM; + /* + * There are two different 4KiB pagesize chips + * and no way to detect it by H/W config values. + * + * To detect the correct NOP for each chips, + * It should check the version ID as workaround. + * + * Now it has as following + * KFM4G16Q4M has NOP 4 with version ID 0x0131 + * KFM4G16Q5M has NOP 1 with versoin ID 0x013e + */ + if ((this->version_id & 0xf) == 0xe) + this->options |= ONENAND_HAS_NOP_1; + } + + case ONENAND_DEVICE_DENSITY_2Gb: + /* 2Gb DDP does not have 2 plane */ + if (!ONENAND_IS_DDP(this)) + this->options |= ONENAND_HAS_2PLANE; + this->options |= ONENAND_HAS_UNLOCK_ALL; + + case ONENAND_DEVICE_DENSITY_1Gb: + /* A-Die has all block unlock */ + if (process) + this->options |= ONENAND_HAS_UNLOCK_ALL; + break; + + default: + /* Some OneNAND has continuous lock scheme */ + if (!process) + this->options |= ONENAND_HAS_CONT_LOCK; + break; + } + + /* The MLC has 4KiB pagesize. */ + if (ONENAND_IS_MLC(this)) + this->options |= ONENAND_HAS_4KB_PAGE; + + if (ONENAND_IS_4KB_PAGE(this)) + this->options &= ~ONENAND_HAS_2PLANE; + + if (FLEXONENAND(this)) { + this->options &= ~ONENAND_HAS_CONT_LOCK; + this->options |= ONENAND_HAS_UNLOCK_ALL; + } + + if (this->options & ONENAND_HAS_CONT_LOCK) + printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); + if (this->options & ONENAND_HAS_UNLOCK_ALL) + printk(KERN_DEBUG "Chip support all block unlock\n"); + if (this->options & ONENAND_HAS_2PLANE) + printk(KERN_DEBUG "Chip has 2 plane\n"); + if (this->options & ONENAND_HAS_4KB_PAGE) + printk(KERN_DEBUG "Chip has 4KiB pagesize\n"); + if (this->options & ONENAND_HAS_CACHE_PROGRAM) + printk(KERN_DEBUG "Chip has cache program feature\n"); +} + +/** + * onenand_print_device_info - Print device & version ID + * @param device device ID + * @param version version ID + * + * Print device & version ID + */ +static void onenand_print_device_info(int device, int version) +{ + int vcc, demuxed, ddp, density, flexonenand; + + vcc = device & ONENAND_DEVICE_VCC_MASK; + demuxed = device & ONENAND_DEVICE_IS_DEMUX; + ddp = device & ONENAND_DEVICE_IS_DDP; + density = onenand_get_density(device); + flexonenand = device & DEVICE_IS_FLEXONENAND; + printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n", + demuxed ? "" : "Muxed ", + flexonenand ? "Flex-" : "", + ddp ? "(DDP)" : "", + (16 << density), + vcc ? "2.65/3.3" : "1.8", + device); + printk(KERN_INFO "OneNAND version = 0x%04x\n", version); +} + +static const struct onenand_manufacturers onenand_manuf_ids[] = { + {ONENAND_MFR_SAMSUNG, "Samsung"}, + {ONENAND_MFR_NUMONYX, "Numonyx"}, +}; + +/** + * onenand_check_maf - Check manufacturer ID + * @param manuf manufacturer ID + * + * Check manufacturer ID + */ +static int onenand_check_maf(int manuf) +{ + int size = ARRAY_SIZE(onenand_manuf_ids); + char *name; + int i; + + for (i = 0; i < size; i++) + if (manuf == onenand_manuf_ids[i].id) + break; + + if (i < size) + name = onenand_manuf_ids[i].name; + else + name = "Unknown"; + + printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf); + + return (i == size); +} + +/** +* flexonenand_get_boundary - Reads the SLC boundary +* @param onenand_info - onenand info structure +**/ +static int flexonenand_get_boundary(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + unsigned die, bdry; + int syscfg, locked; + + /* Disable ECC */ + syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); + this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1); + + for (die = 0; die < this->dies; die++) { + this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); + this->wait(mtd, FL_SYNCING); + + this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); + this->wait(mtd, FL_READING); + + bdry = this->read_word(this->base + ONENAND_DATARAM); + if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3) + locked = 0; + else + locked = 1; + this->boundary[die] = bdry & FLEXONENAND_PI_MASK; + + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + printk(KERN_INFO "Die %d boundary: %d%s\n", die, + this->boundary[die], locked ? "(Locked)" : "(Unlocked)"); + } + + /* Enable ECC */ + this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); + return 0; +} + +/** + * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info + * boundary[], diesize[], mtd->size, mtd->erasesize + * @param mtd - MTD device structure + */ +static void flexonenand_get_size(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int die, i, eraseshift, density; + int blksperdie, maxbdry; + loff_t ofs; + + density = onenand_get_density(this->device_id); + blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift); + blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; + maxbdry = blksperdie - 1; + eraseshift = this->erase_shift - 1; + + mtd->numeraseregions = this->dies << 1; + + /* This fills up the device boundary */ + flexonenand_get_boundary(mtd); + die = ofs = 0; + i = -1; + for (; die < this->dies; die++) { + if (!die || this->boundary[die-1] != maxbdry) { + i++; + mtd->eraseregions[i].offset = ofs; + mtd->eraseregions[i].erasesize = 1 << eraseshift; + mtd->eraseregions[i].numblocks = + this->boundary[die] + 1; + ofs += mtd->eraseregions[i].numblocks << eraseshift; + eraseshift++; + } else { + mtd->numeraseregions -= 1; + mtd->eraseregions[i].numblocks += + this->boundary[die] + 1; + ofs += (this->boundary[die] + 1) << (eraseshift - 1); + } + if (this->boundary[die] != maxbdry) { + i++; + mtd->eraseregions[i].offset = ofs; + mtd->eraseregions[i].erasesize = 1 << eraseshift; + mtd->eraseregions[i].numblocks = maxbdry ^ + this->boundary[die]; + ofs += mtd->eraseregions[i].numblocks << eraseshift; + eraseshift--; + } else + mtd->numeraseregions -= 1; + } + + /* Expose MLC erase size except when all blocks are SLC */ + mtd->erasesize = 1 << this->erase_shift; + if (mtd->numeraseregions == 1) + mtd->erasesize >>= 1; + + printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions); + for (i = 0; i < mtd->numeraseregions; i++) + printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x," + " numblocks: %04u]\n", + (unsigned int) mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + + for (die = 0, mtd->size = 0; die < this->dies; die++) { + this->diesize[die] = (loff_t)blksperdie << this->erase_shift; + this->diesize[die] -= (loff_t)(this->boundary[die] + 1) + << (this->erase_shift - 1); + mtd->size += this->diesize[die]; + } +} + +/** + * flexonenand_check_blocks_erased - Check if blocks are erased + * @param mtd_info - mtd info structure + * @param start - first erase block to check + * @param end - last erase block to check + * + * Converting an unerased block from MLC to SLC + * causes byte values to change. Since both data and its ECC + * have changed, reads on the block give uncorrectable error. + * This might lead to the block being detected as bad. + * + * Avoid this by ensuring that the block to be converted is + * erased. + */ +static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int end) +{ + struct onenand_chip *this = mtd->priv; + int i, ret; + int block; + struct mtd_oob_ops ops = { + .mode = MTD_OPS_PLACE_OOB, + .ooboffs = 0, + .ooblen = mtd->oobsize, + .datbuf = NULL, + .oobbuf = this->oob_buf, + }; + loff_t addr; + + printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end); + + for (block = start; block <= end; block++) { + addr = flexonenand_addr(this, block); + if (onenand_block_isbad_nolock(mtd, addr, 0)) + continue; + + /* + * Since main area write results in ECC write to spare, + * it is sufficient to check only ECC bytes for change. + */ + ret = onenand_read_oob_nolock(mtd, addr, &ops); + if (ret) + return ret; + + for (i = 0; i < mtd->oobsize; i++) + if (this->oob_buf[i] != 0xff) + break; + + if (i != mtd->oobsize) { + printk(KERN_WARNING "%s: Block %d not erased.\n", + __func__, block); + return 1; + } + } + + return 0; +} + +/** + * flexonenand_set_boundary - Writes the SLC boundary + * @param mtd - mtd info structure + */ +static int flexonenand_set_boundary(struct mtd_info *mtd, int die, + int boundary, int lock) +{ + struct onenand_chip *this = mtd->priv; + int ret, density, blksperdie, old, new, thisboundary; + loff_t addr; + + /* Change only once for SDP Flex-OneNAND */ + if (die && (!ONENAND_IS_DDP(this))) + return 0; + + /* boundary value of -1 indicates no required change */ + if (boundary < 0 || boundary == this->boundary[die]) + return 0; + + density = onenand_get_density(this->device_id); + blksperdie = ((16 << density) << 20) >> this->erase_shift; + blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; + + if (boundary >= blksperdie) { + printk(KERN_ERR "%s: Invalid boundary value. " + "Boundary not changed.\n", __func__); + return -EINVAL; + } + + /* Check if converting blocks are erased */ + old = this->boundary[die] + (die * this->density_mask); + new = boundary + (die * this->density_mask); + ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new)); + if (ret) { + printk(KERN_ERR "%s: Please erase blocks " + "before boundary change\n", __func__); + return ret; + } + + this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); + this->wait(mtd, FL_SYNCING); + + /* Check is boundary is locked */ + this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); + this->wait(mtd, FL_READING); + + thisboundary = this->read_word(this->base + ONENAND_DATARAM); + if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) { + printk(KERN_ERR "%s: boundary locked\n", __func__); + ret = 1; + goto out; + } + + printk(KERN_INFO "Changing die %d boundary: %d%s\n", + die, boundary, lock ? "(Locked)" : "(Unlocked)"); + + addr = die ? this->diesize[0] : 0; + + boundary &= FLEXONENAND_PI_MASK; + boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT); + + this->command(mtd, ONENAND_CMD_ERASE, addr, 0); + ret = this->wait(mtd, FL_ERASING); + if (ret) { + printk(KERN_ERR "%s: Failed PI erase for Die %d\n", + __func__, die); + goto out; + } + + this->write_word(boundary, this->base + ONENAND_DATARAM); + this->command(mtd, ONENAND_CMD_PROG, addr, 0); + ret = this->wait(mtd, FL_WRITING); + if (ret) { + printk(KERN_ERR "%s: Failed PI write for Die %d\n", + __func__, die); + goto out; + } + + this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0); + ret = this->wait(mtd, FL_WRITING); +out: + this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND); + this->wait(mtd, FL_RESETING); + if (!ret) + /* Recalculate device size on boundary change*/ + flexonenand_get_size(mtd); + + return ret; +} + +/** + * onenand_chip_probe - [OneNAND Interface] The generic chip probe + * @param mtd MTD device structure + * + * OneNAND detection method: + * Compare the values from command with ones from register + */ +static int onenand_chip_probe(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int bram_maf_id, bram_dev_id, maf_id, dev_id; + int syscfg; + + /* Save system configuration 1 */ + syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); + /* Clear Sync. Burst Read mode to read BootRAM */ + this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE), this->base + ONENAND_REG_SYS_CFG1); + + /* Send the command for reading device ID from BootRAM */ + this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM); + + /* Read manufacturer and device IDs from BootRAM */ + bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0); + bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2); + + /* Reset OneNAND to read default register values */ + this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM); + /* Wait reset */ + this->wait(mtd, FL_RESETING); + + /* Restore system configuration 1 */ + this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); + + /* Check manufacturer ID */ + if (onenand_check_maf(bram_maf_id)) + return -ENXIO; + + /* Read manufacturer and device IDs from Register */ + maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); + dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); + + /* Check OneNAND device */ + if (maf_id != bram_maf_id || dev_id != bram_dev_id) + return -ENXIO; + + return 0; +} + +/** + * onenand_probe - [OneNAND Interface] Probe the OneNAND device + * @param mtd MTD device structure + */ +static int onenand_probe(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int dev_id, ver_id; + int density; + int ret; + + ret = this->chip_probe(mtd); + if (ret) + return ret; + + /* Device and version IDs from Register */ + dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); + ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); + this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); + + /* Flash device information */ + onenand_print_device_info(dev_id, ver_id); + this->device_id = dev_id; + this->version_id = ver_id; + + /* Check OneNAND features */ + onenand_check_features(mtd); + + density = onenand_get_density(dev_id); + if (FLEXONENAND(this)) { + this->dies = ONENAND_IS_DDP(this) ? 2 : 1; + /* Maximum possible erase regions */ + mtd->numeraseregions = this->dies << 1; + mtd->eraseregions = + kcalloc(this->dies << 1, + sizeof(struct mtd_erase_region_info), + GFP_KERNEL); + if (!mtd->eraseregions) + return -ENOMEM; + } + + /* + * For Flex-OneNAND, chipsize represents maximum possible device size. + * mtd->size represents the actual device size. + */ + this->chipsize = (16 << density) << 20; + + /* OneNAND page size & block size */ + /* The data buffer size is equal to page size */ + mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + /* We use the full BufferRAM */ + if (ONENAND_IS_4KB_PAGE(this)) + mtd->writesize <<= 1; + + mtd->oobsize = mtd->writesize >> 5; + /* Pages per a block are always 64 in OneNAND */ + mtd->erasesize = mtd->writesize << 6; + /* + * Flex-OneNAND SLC area has 64 pages per block. + * Flex-OneNAND MLC area has 128 pages per block. + * Expose MLC erase size to find erase_shift and page_mask. + */ + if (FLEXONENAND(this)) + mtd->erasesize <<= 1; + + this->erase_shift = ffs(mtd->erasesize) - 1; + this->page_shift = ffs(mtd->writesize) - 1; + this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1; + /* Set density mask. it is used for DDP */ + if (ONENAND_IS_DDP(this)) + this->density_mask = this->chipsize >> (this->erase_shift + 1); + /* It's real page size */ + this->writesize = mtd->writesize; + + /* REVISIT: Multichip handling */ + + if (FLEXONENAND(this)) + flexonenand_get_size(mtd); + else + mtd->size = this->chipsize; + + /* + * We emulate the 4KiB page and 256KiB erase block size + * But oobsize is still 64 bytes. + * It is only valid if you turn on 2X program support, + * Otherwise it will be ignored by compiler. + */ + if (ONENAND_IS_2PLANE(this)) { + mtd->writesize <<= 1; + mtd->erasesize <<= 1; + } + + return 0; +} + +/** + * onenand_suspend - [MTD Interface] Suspend the OneNAND flash + * @param mtd MTD device structure + */ +static int onenand_suspend(struct mtd_info *mtd) +{ + return onenand_get_device(mtd, FL_PM_SUSPENDED); +} + +/** + * onenand_resume - [MTD Interface] Resume the OneNAND flash + * @param mtd MTD device structure + */ +static void onenand_resume(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + if (this->state == FL_PM_SUSPENDED) + onenand_release_device(mtd); + else + printk(KERN_ERR "%s: resume() called for the chip which is not " + "in suspended state\n", __func__); +} + +/** + * onenand_scan - [OneNAND Interface] Scan for the OneNAND device + * @param mtd MTD device structure + * @param maxchips Number of chips to scan for + * + * This fills out all the not initialized function pointers + * with the defaults. + * The flash ID is read and the mtd/chip structures are + * filled with the appropriate values. + */ +int onenand_scan(struct mtd_info *mtd, int maxchips) +{ + int i, ret; + struct onenand_chip *this = mtd->priv; + + if (!this->read_word) + this->read_word = onenand_readw; + if (!this->write_word) + this->write_word = onenand_writew; + + if (!this->command) + this->command = onenand_command; + if (!this->wait) + onenand_setup_wait(mtd); + if (!this->bbt_wait) + this->bbt_wait = onenand_bbt_wait; + if (!this->unlock_all) + this->unlock_all = onenand_unlock_all; + + if (!this->chip_probe) + this->chip_probe = onenand_chip_probe; + + if (!this->read_bufferram) + this->read_bufferram = onenand_read_bufferram; + if (!this->write_bufferram) + this->write_bufferram = onenand_write_bufferram; + + if (!this->block_markbad) + this->block_markbad = onenand_default_block_markbad; + if (!this->scan_bbt) + this->scan_bbt = onenand_default_bbt; + + if (onenand_probe(mtd)) + return -ENXIO; + + /* Set Sync. Burst Read after probing */ + if (this->mmcontrol) { + printk(KERN_INFO "OneNAND Sync. Burst Read support\n"); + this->read_bufferram = onenand_sync_read_bufferram; + } + + /* Allocate buffers, if necessary */ + if (!this->page_buf) { + this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL); + if (!this->page_buf) + return -ENOMEM; +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE + this->verify_buf = kzalloc(mtd->writesize, GFP_KERNEL); + if (!this->verify_buf) { + kfree(this->page_buf); + return -ENOMEM; + } +#endif + this->options |= ONENAND_PAGEBUF_ALLOC; + } + if (!this->oob_buf) { + this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL); + if (!this->oob_buf) { + if (this->options & ONENAND_PAGEBUF_ALLOC) { + this->options &= ~ONENAND_PAGEBUF_ALLOC; + kfree(this->page_buf); + } + return -ENOMEM; + } + this->options |= ONENAND_OOBBUF_ALLOC; + } + + this->state = FL_READY; + init_waitqueue_head(&this->wq); + spin_lock_init(&this->chip_lock); + + /* + * Allow subpage writes up to oobsize. + */ + switch (mtd->oobsize) { + case 128: + if (FLEXONENAND(this)) { + mtd_set_ooblayout(mtd, &flexonenand_ooblayout_ops); + mtd->subpage_sft = 0; + } else { + mtd_set_ooblayout(mtd, &onenand_oob_128_ooblayout_ops); + mtd->subpage_sft = 2; + } + if (ONENAND_IS_NOP_1(this)) + mtd->subpage_sft = 0; + break; + case 64: + mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops); + mtd->subpage_sft = 2; + break; + + case 32: + mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops); + mtd->subpage_sft = 1; + break; + + default: + printk(KERN_WARNING "%s: No OOB scheme defined for oobsize %d\n", + __func__, mtd->oobsize); + mtd->subpage_sft = 0; + /* To prevent kernel oops */ + mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops); + break; + } + + this->subpagesize = mtd->writesize >> mtd->subpage_sft; + + /* + * The number of bytes available for a client to place data into + * the out of band area + */ + ret = mtd_ooblayout_count_freebytes(mtd); + if (ret < 0) + ret = 0; + + mtd->oobavail = ret; + + mtd->ecc_strength = 1; + + /* Fill in remaining MTD driver data */ + mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH; + mtd->flags = MTD_CAP_NANDFLASH; + mtd->_erase = onenand_erase; + mtd->_point = NULL; + mtd->_unpoint = NULL; + mtd->_read_oob = onenand_read_oob; + mtd->_write_oob = onenand_write_oob; + mtd->_panic_write = onenand_panic_write; +#ifdef CONFIG_MTD_ONENAND_OTP + mtd->_get_fact_prot_info = onenand_get_fact_prot_info; + mtd->_read_fact_prot_reg = onenand_read_fact_prot_reg; + mtd->_get_user_prot_info = onenand_get_user_prot_info; + mtd->_read_user_prot_reg = onenand_read_user_prot_reg; + mtd->_write_user_prot_reg = onenand_write_user_prot_reg; + mtd->_lock_user_prot_reg = onenand_lock_user_prot_reg; +#endif + mtd->_sync = onenand_sync; + mtd->_lock = onenand_lock; + mtd->_unlock = onenand_unlock; + mtd->_suspend = onenand_suspend; + mtd->_resume = onenand_resume; + mtd->_block_isbad = onenand_block_isbad; + mtd->_block_markbad = onenand_block_markbad; + mtd->owner = THIS_MODULE; + mtd->writebufsize = mtd->writesize; + + /* Unlock whole block */ + if (!(this->options & ONENAND_SKIP_INITIAL_UNLOCKING)) + this->unlock_all(mtd); + + ret = this->scan_bbt(mtd); + if ((!FLEXONENAND(this)) || ret) + return ret; + + /* Change Flex-OneNAND boundaries if required */ + for (i = 0; i < MAX_DIES; i++) + flexonenand_set_boundary(mtd, i, flex_bdry[2 * i], + flex_bdry[(2 * i) + 1]); + + return 0; +} + +/** + * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device + * @param mtd MTD device structure + */ +void onenand_release(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + /* Deregister partitions */ + mtd_device_unregister(mtd); + + /* Free bad block table memory, if allocated */ + if (this->bbm) { + struct bbm_info *bbm = this->bbm; + kfree(bbm->bbt); + kfree(this->bbm); + } + /* Buffers allocated by onenand_scan */ + if (this->options & ONENAND_PAGEBUF_ALLOC) { + kfree(this->page_buf); +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE + kfree(this->verify_buf); +#endif + } + if (this->options & ONENAND_OOBBUF_ALLOC) + kfree(this->oob_buf); + kfree(mtd->eraseregions); +} + +EXPORT_SYMBOL_GPL(onenand_scan); +EXPORT_SYMBOL_GPL(onenand_release); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>"); +MODULE_DESCRIPTION("Generic OneNAND flash driver code"); |