diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/nfc/st21nfca/st21nfca.h | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/drivers/nfc/st21nfca/st21nfca.h b/drivers/nfc/st21nfca/st21nfca.h new file mode 100644 index 000000000..7e2923ac9 --- /dev/null +++ b/drivers/nfc/st21nfca/st21nfca.h @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __LOCAL_ST21NFCA_H_ +#define __LOCAL_ST21NFCA_H_ + +#include <net/nfc/hci.h> +#include <linux/skbuff.h> +#include <linux/workqueue.h> + +#define HCI_MODE 0 + +/* framing in HCI mode */ +#define ST21NFCA_SOF_EOF_LEN 2 + +/* Almost every time value is 0 */ +#define ST21NFCA_HCI_LLC_LEN 1 + +/* Size in worst case : + * In normal case CRC len = 2 but byte stuffing + * may appear in case one CRC byte = ST21NFCA_SOF_EOF + */ +#define ST21NFCA_HCI_LLC_CRC 4 + +#define ST21NFCA_HCI_LLC_LEN_CRC (ST21NFCA_SOF_EOF_LEN + \ + ST21NFCA_HCI_LLC_LEN + \ + ST21NFCA_HCI_LLC_CRC) +#define ST21NFCA_HCI_LLC_MIN_SIZE (1 + ST21NFCA_HCI_LLC_LEN_CRC) + +/* Worst case when adding byte stuffing between each byte */ +#define ST21NFCA_HCI_LLC_MAX_PAYLOAD 29 +#define ST21NFCA_HCI_LLC_MAX_SIZE (ST21NFCA_HCI_LLC_LEN_CRC + 1 + \ + ST21NFCA_HCI_LLC_MAX_PAYLOAD) + +/* Reader RF commands */ +#define ST21NFCA_WR_XCHG_DATA 0x10 + +#define ST21NFCA_DEVICE_MGNT_GATE 0x01 +#define ST21NFCA_RF_READER_F_GATE 0x14 +#define ST21NFCA_RF_CARD_F_GATE 0x24 +#define ST21NFCA_APDU_READER_GATE 0xf0 +#define ST21NFCA_CONNECTIVITY_GATE 0x41 + +/* + * ref ISO7816-3 chap 8.1. the initial character TS is followed by a + * sequence of at most 32 characters. + */ +#define ST21NFCA_ESE_MAX_LENGTH 33 +#define ST21NFCA_ESE_HOST_ID 0xc0 + +#define DRIVER_DESC "HCI NFC driver for ST21NFCA" + +#define ST21NFCA_HCI_MODE 0 +#define ST21NFCA_NUM_DEVICES 256 + +#define ST21NFCA_VENDOR_OUI 0x0080E1 /* STMicroelectronics */ +#define ST21NFCA_FACTORY_MODE 2 + +struct st21nfca_se_status { + bool is_ese_present; + bool is_uicc_present; +}; + +enum st21nfca_state { + ST21NFCA_ST_COLD, + ST21NFCA_ST_READY, +}; + +/** + * enum nfc_vendor_cmds - supported nfc vendor commands + * + * @FACTORY_MODE: Allow to set the driver into a mode where no secure element + * are activated. It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. + * It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example + * RF trimmings or low level drivers configurations (I2C, SPI, SWP). + * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing + * table following RF technology, CLF mode or protocol. + * @HCI_DM_GET_INFO: Allow to retrieve CLF information. + * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low + * level drivers configurations or RF trimmings. + * @HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete + * packet can be more than 8KB. + * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF + * configuration changes without CLF power off. + * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the + * white list). + * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF + * technology. When using this command to anti-collision is done. + * @HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF + * connectivity. + */ +enum nfc_vendor_cmds { + FACTORY_MODE, + HCI_CLEAR_ALL_PIPES, + HCI_DM_PUT_DATA, + HCI_DM_UPDATE_AID, + HCI_DM_GET_INFO, + HCI_DM_GET_DATA, + HCI_DM_LOAD, + HCI_DM_RESET, + HCI_GET_PARAM, + HCI_DM_FIELD_GENERATOR, + HCI_LOOPBACK, +}; + +struct st21nfca_vendor_info { + struct completion req_completion; + struct sk_buff *rx_skb; +}; + +struct st21nfca_dep_info { + struct sk_buff *tx_pending; + struct work_struct tx_work; + u8 curr_nfc_dep_pni; + u32 idx; + u8 to; + u8 did; + u8 bsi; + u8 bri; + u8 lri; +} __packed; + +struct st21nfca_se_info { + u8 atr[ST21NFCA_ESE_MAX_LENGTH]; + struct completion req_completion; + + struct timer_list bwi_timer; + int wt_timeout; /* in msecs */ + bool bwi_active; + + struct timer_list se_active_timer; + bool se_active; + int expected_pipes; + int count_pipes; + + bool xch_error; + + se_io_cb_t cb; + void *cb_context; + struct work_struct timeout_work; +}; + +struct st21nfca_hci_info { + struct nfc_phy_ops *phy_ops; + void *phy_id; + + struct nfc_hci_dev *hdev; + struct st21nfca_se_status *se_status; + + enum st21nfca_state state; + + struct mutex info_lock; + + int async_cb_type; + data_exchange_cb_t async_cb; + void *async_cb_context; + + struct st21nfca_dep_info dep_info; + struct st21nfca_se_info se_info; + struct st21nfca_vendor_info vendor_info; +}; + +int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, + char *llc_name, int phy_headroom, int phy_tailroom, + int phy_payload, struct nfc_hci_dev **hdev, + struct st21nfca_se_status *se_status); +void st21nfca_hci_remove(struct nfc_hci_dev *hdev); + +int st21nfca_dep_event_received(struct nfc_hci_dev *hdev, + u8 event, struct sk_buff *skb); +int st21nfca_tm_send_dep_res(struct nfc_hci_dev *hdev, struct sk_buff *skb); + +int st21nfca_im_send_atr_req(struct nfc_hci_dev *hdev, u8 *gb, size_t gb_len); +int st21nfca_im_send_dep_req(struct nfc_hci_dev *hdev, struct sk_buff *skb); +void st21nfca_dep_init(struct nfc_hci_dev *hdev); +void st21nfca_dep_deinit(struct nfc_hci_dev *hdev); + +int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, + u8 event, struct sk_buff *skb); +int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev, + u8 event, struct sk_buff *skb); + +int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev); +int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx); +int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx); +int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx, + u8 *apdu, size_t apdu_length, + se_io_cb_t cb, void *cb_context); + +void st21nfca_se_init(struct nfc_hci_dev *hdev); +void st21nfca_se_deinit(struct nfc_hci_dev *hdev); + +int st21nfca_hci_loopback_event_received(struct nfc_hci_dev *ndev, u8 event, + struct sk_buff *skb); +int st21nfca_vendor_cmds_init(struct nfc_hci_dev *ndev); + +#endif /* __LOCAL_ST21NFCA_H_ */ |