diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/pci/controller/pci-mvebu.c | 1340 |
1 files changed, 1340 insertions, 0 deletions
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c new file mode 100644 index 000000000..a41d79b8d --- /dev/null +++ b/drivers/pci/controller/pci-mvebu.c @@ -0,0 +1,1340 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PCIe driver for Marvell Armada 370 and Armada XP SoCs + * + * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/msi.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/of_pci.h> +#include <linux/of_platform.h> + +#include "../pci.h" + +/* + * PCIe unit register offsets. + */ +#define PCIE_DEV_ID_OFF 0x0000 +#define PCIE_CMD_OFF 0x0004 +#define PCIE_DEV_REV_OFF 0x0008 +#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) +#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) +#define PCIE_CAP_PCIEXP 0x0060 +#define PCIE_HEADER_LOG_4_OFF 0x0128 +#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) +#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) +#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) +#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) +#define PCIE_WIN5_CTRL_OFF 0x1880 +#define PCIE_WIN5_BASE_OFF 0x1884 +#define PCIE_WIN5_REMAP_OFF 0x188c +#define PCIE_CONF_ADDR_OFF 0x18f8 +#define PCIE_CONF_ADDR_EN 0x80000000 +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) +#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) +#define PCIE_CONF_ADDR(bus, devfn, where) \ + (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \ + PCIE_CONF_ADDR_EN) +#define PCIE_CONF_DATA_OFF 0x18fc +#define PCIE_MASK_OFF 0x1910 +#define PCIE_MASK_ENABLE_INTS 0x0f000000 +#define PCIE_CTRL_OFF 0x1a00 +#define PCIE_CTRL_X1_MODE 0x0001 +#define PCIE_STAT_OFF 0x1a04 +#define PCIE_STAT_BUS 0xff00 +#define PCIE_STAT_DEV 0x1f0000 +#define PCIE_STAT_LINK_DOWN BIT(0) +#define PCIE_RC_RTSTA 0x1a14 +#define PCIE_DEBUG_CTRL 0x1a60 +#define PCIE_DEBUG_SOFT_RESET BIT(20) + +enum { + PCISWCAP = PCI_BRIDGE_CONTROL + 2, + PCISWCAP_EXP_LIST_ID = PCISWCAP + PCI_CAP_LIST_ID, + PCISWCAP_EXP_DEVCAP = PCISWCAP + PCI_EXP_DEVCAP, + PCISWCAP_EXP_DEVCTL = PCISWCAP + PCI_EXP_DEVCTL, + PCISWCAP_EXP_LNKCAP = PCISWCAP + PCI_EXP_LNKCAP, + PCISWCAP_EXP_LNKCTL = PCISWCAP + PCI_EXP_LNKCTL, + PCISWCAP_EXP_SLTCAP = PCISWCAP + PCI_EXP_SLTCAP, + PCISWCAP_EXP_SLTCTL = PCISWCAP + PCI_EXP_SLTCTL, + PCISWCAP_EXP_RTCTL = PCISWCAP + PCI_EXP_RTCTL, + PCISWCAP_EXP_RTSTA = PCISWCAP + PCI_EXP_RTSTA, + PCISWCAP_EXP_DEVCAP2 = PCISWCAP + PCI_EXP_DEVCAP2, + PCISWCAP_EXP_DEVCTL2 = PCISWCAP + PCI_EXP_DEVCTL2, + PCISWCAP_EXP_LNKCAP2 = PCISWCAP + PCI_EXP_LNKCAP2, + PCISWCAP_EXP_LNKCTL2 = PCISWCAP + PCI_EXP_LNKCTL2, + PCISWCAP_EXP_SLTCAP2 = PCISWCAP + PCI_EXP_SLTCAP2, + PCISWCAP_EXP_SLTCTL2 = PCISWCAP + PCI_EXP_SLTCTL2, +}; + +/* PCI configuration space of a PCI-to-PCI bridge */ +struct mvebu_sw_pci_bridge { + u16 vendor; + u16 device; + u16 command; + u16 status; + u16 class; + u8 interface; + u8 revision; + u8 bist; + u8 header_type; + u8 latency_timer; + u8 cache_line_size; + u32 bar[2]; + u8 primary_bus; + u8 secondary_bus; + u8 subordinate_bus; + u8 secondary_latency_timer; + u8 iobase; + u8 iolimit; + u16 secondary_status; + u16 membase; + u16 memlimit; + u16 iobaseupper; + u16 iolimitupper; + u32 romaddr; + u8 intline; + u8 intpin; + u16 bridgectrl; + + /* PCI express capability */ + u32 pcie_sltcap; + u16 pcie_devctl; + u16 pcie_rtctl; +}; + +struct mvebu_pcie_port; + +/* Structure representing all PCIe interfaces */ +struct mvebu_pcie { + struct platform_device *pdev; + struct mvebu_pcie_port *ports; + struct msi_controller *msi; + struct list_head resources; + struct resource io; + struct resource realio; + struct resource mem; + struct resource busn; + int nports; +}; + +struct mvebu_pcie_window { + phys_addr_t base; + phys_addr_t remap; + size_t size; +}; + +/* Structure representing one PCIe interface */ +struct mvebu_pcie_port { + char *name; + void __iomem *base; + u32 port; + u32 lane; + int devfn; + unsigned int mem_target; + unsigned int mem_attr; + unsigned int io_target; + unsigned int io_attr; + struct clk *clk; + struct gpio_desc *reset_gpio; + char *reset_name; + struct mvebu_sw_pci_bridge bridge; + struct device_node *dn; + struct mvebu_pcie *pcie; + struct mvebu_pcie_window memwin; + struct mvebu_pcie_window iowin; + u32 saved_pcie_stat; +}; + +static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg) +{ + writel(val, port->base + reg); +} + +static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg) +{ + return readl(port->base + reg); +} + +static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port) +{ + return port->io_target != -1 && port->io_attr != -1; +} + +static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port) +{ + return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); +} + +static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr) +{ + u32 stat; + + stat = mvebu_readl(port, PCIE_STAT_OFF); + stat &= ~PCIE_STAT_BUS; + stat |= nr << 8; + mvebu_writel(port, stat, PCIE_STAT_OFF); +} + +static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr) +{ + u32 stat; + + stat = mvebu_readl(port, PCIE_STAT_OFF); + stat &= ~PCIE_STAT_DEV; + stat |= nr << 16; + mvebu_writel(port, stat, PCIE_STAT_OFF); +} + +/* + * Setup PCIE BARs and Address Decode Wins: + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * WIN[0-3] -> DRAM bank[0-3] + */ +static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) +{ + const struct mbus_dram_target_info *dram; + u32 size; + int i; + + dram = mv_mbus_dram_info(); + + /* First, disable and clear BARs and windows. */ + for (i = 1; i < 3; i++) { + mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i)); + mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i)); + mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i)); + } + + for (i = 0; i < 5; i++) { + mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i)); + mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i)); + mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); + } + + mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF); + mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF); + mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF); + + /* Setup windows for DDR banks. Count total DDR size on the fly. */ + size = 0; + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + + mvebu_writel(port, cs->base & 0xffff0000, + PCIE_WIN04_BASE_OFF(i)); + mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); + mvebu_writel(port, + ((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + PCIE_WIN04_CTRL_OFF(i)); + + size += cs->size; + } + + /* Round up 'size' to the nearest power of two. */ + if ((size & (size - 1)) != 0) + size = 1 << fls(size); + + /* Setup BAR[1] to all DRAM banks. */ + mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1)); + mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1)); + mvebu_writel(port, ((size - 1) & 0xffff0000) | 1, + PCIE_BAR_CTRL_OFF(1)); +} + +static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) +{ + u32 cmd, mask; + + /* Point PCIe unit MBUS decode windows to DRAM space. */ + mvebu_pcie_setup_wins(port); + + /* Master + slave enable. */ + cmd = mvebu_readl(port, PCIE_CMD_OFF); + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + cmd |= PCI_COMMAND_MASTER; + mvebu_writel(port, cmd, PCIE_CMD_OFF); + + /* Enable interrupt lines A-D. */ + mask = mvebu_readl(port, PCIE_MASK_OFF); + mask |= PCIE_MASK_ENABLE_INTS; + mvebu_writel(port, mask, PCIE_MASK_OFF); +} + +static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, + struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; + + mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), + PCIE_CONF_ADDR_OFF); + + switch (size) { + case 1: + *val = readb_relaxed(conf_data + (where & 3)); + break; + case 2: + *val = readw_relaxed(conf_data + (where & 2)); + break; + case 4: + *val = readl_relaxed(conf_data); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, + struct pci_bus *bus, + u32 devfn, int where, int size, u32 val) +{ + void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF; + + mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), + PCIE_CONF_ADDR_OFF); + + switch (size) { + case 1: + writeb(val, conf_data + (where & 3)); + break; + case 2: + writew(val, conf_data + (where & 2)); + break; + case 4: + writel(val, conf_data); + break; + default: + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * Remove windows, starting from the largest ones to the smallest + * ones. + */ +static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port, + phys_addr_t base, size_t size) +{ + while (size) { + size_t sz = 1 << (fls(size) - 1); + + mvebu_mbus_del_window(base, sz); + base += sz; + size -= sz; + } +} + +/* + * MBus windows can only have a power of two size, but PCI BARs do not + * have this constraint. Therefore, we have to split the PCI BAR into + * areas each having a power of two size. We start from the largest + * one (i.e highest order bit set in the size). + */ +static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + phys_addr_t base, size_t size, + phys_addr_t remap) +{ + size_t size_mapped = 0; + + while (size) { + size_t sz = 1 << (fls(size) - 1); + int ret; + + ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base, + sz, remap); + if (ret) { + phys_addr_t end = base + sz - 1; + + dev_err(&port->pcie->pdev->dev, + "Could not create MBus window at [mem %pa-%pa]: %d\n", + &base, &end, ret); + mvebu_pcie_del_windows(port, base - size_mapped, + size_mapped); + return; + } + + size -= sz; + size_mapped += sz; + base += sz; + if (remap != MVEBU_MBUS_NO_REMAP) + remap += sz; + } +} + +static void mvebu_pcie_set_window(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + const struct mvebu_pcie_window *desired, + struct mvebu_pcie_window *cur) +{ + if (desired->base == cur->base && desired->remap == cur->remap && + desired->size == cur->size) + return; + + if (cur->size != 0) { + mvebu_pcie_del_windows(port, cur->base, cur->size); + cur->size = 0; + cur->base = 0; + + /* + * If something tries to change the window while it is enabled + * the change will not be done atomically. That would be + * difficult to do in the general case. + */ + } + + if (desired->size == 0) + return; + + mvebu_pcie_add_windows(port, target, attribute, desired->base, + desired->size, desired->remap); + *cur = *desired; +} + +static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) +{ + struct mvebu_pcie_window desired = {}; + + /* Are the new iobase/iolimit values invalid? */ + if (port->bridge.iolimit < port->bridge.iobase || + port->bridge.iolimitupper < port->bridge.iobaseupper || + !(port->bridge.command & PCI_COMMAND_IO)) { + mvebu_pcie_set_window(port, port->io_target, port->io_attr, + &desired, &port->iowin); + return; + } + + if (!mvebu_has_ioport(port)) { + dev_WARN(&port->pcie->pdev->dev, + "Attempt to set IO when IO is disabled\n"); + return; + } + + /* + * We read the PCI-to-PCI bridge emulated registers, and + * calculate the base address and size of the address decoding + * window to setup, according to the PCI-to-PCI bridge + * specifications. iobase is the bus address, port->iowin_base + * is the CPU address. + */ + desired.remap = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + desired.base = port->pcie->io.start + desired.remap; + desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + desired.remap) + + 1; + + mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, + &port->iowin); +} + +static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) +{ + struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; + + /* Are the new membase/memlimit values invalid? */ + if (port->bridge.memlimit < port->bridge.membase || + !(port->bridge.command & PCI_COMMAND_MEMORY)) { + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, + &desired, &port->memwin); + return; + } + + /* + * We read the PCI-to-PCI bridge emulated registers, and + * calculate the base address and size of the address decoding + * window to setup, according to the PCI-to-PCI bridge + * specifications. + */ + desired.base = ((port->bridge.membase & 0xFFF0) << 16); + desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + desired.base + 1; + + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, + &port->memwin); +} + +/* + * Initialize the configuration space of the PCI-to-PCI bridge + * associated with the given PCIe interface. + */ +static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + + memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge)); + + bridge->class = PCI_CLASS_BRIDGE_PCI; + bridge->vendor = PCI_VENDOR_ID_MARVELL; + bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16; + bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff; + bridge->header_type = PCI_HEADER_TYPE_BRIDGE; + bridge->cache_line_size = 0x10; + + /* We support 32 bits I/O addressing */ + bridge->iobase = PCI_IO_RANGE_TYPE_32; + bridge->iolimit = PCI_IO_RANGE_TYPE_32; + + /* Add capabilities */ + bridge->status = PCI_STATUS_CAP_LIST; +} + +/* + * Read the configuration space of the PCI-to-PCI bridge associated to + * the given PCIe interface. + */ +static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port, + unsigned int where, int size, u32 *value) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + + switch (where & ~3) { + case PCI_VENDOR_ID: + *value = bridge->device << 16 | bridge->vendor; + break; + + case PCI_COMMAND: + *value = bridge->command | bridge->status << 16; + break; + + case PCI_CLASS_REVISION: + *value = bridge->class << 16 | bridge->interface << 8 | + bridge->revision; + break; + + case PCI_CACHE_LINE_SIZE: + *value = bridge->bist << 24 | bridge->header_type << 16 | + bridge->latency_timer << 8 | bridge->cache_line_size; + break; + + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: + *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4]; + break; + + case PCI_PRIMARY_BUS: + *value = (bridge->secondary_latency_timer << 24 | + bridge->subordinate_bus << 16 | + bridge->secondary_bus << 8 | + bridge->primary_bus); + break; + + case PCI_IO_BASE: + if (!mvebu_has_ioport(port)) + *value = bridge->secondary_status << 16; + else + *value = (bridge->secondary_status << 16 | + bridge->iolimit << 8 | + bridge->iobase); + break; + + case PCI_MEMORY_BASE: + *value = (bridge->memlimit << 16 | bridge->membase); + break; + + case PCI_PREF_MEMORY_BASE: + *value = 0; + break; + + case PCI_IO_BASE_UPPER16: + *value = (bridge->iolimitupper << 16 | bridge->iobaseupper); + break; + + case PCI_CAPABILITY_LIST: + *value = PCISWCAP; + break; + + case PCI_ROM_ADDRESS1: + *value = 0; + break; + + case PCI_INTERRUPT_LINE: + /* LINE PIN MIN_GNT MAX_LAT */ + *value = 0; + break; + + case PCISWCAP_EXP_LIST_ID: + /* Set PCIe v2, root port, slot support */ + *value = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2 | + PCI_EXP_FLAGS_SLOT) << 16 | PCI_CAP_ID_EXP; + break; + + case PCISWCAP_EXP_DEVCAP: + *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP); + break; + + case PCISWCAP_EXP_DEVCTL: + *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) & + ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE | + PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE); + *value |= bridge->pcie_devctl; + break; + + case PCISWCAP_EXP_LNKCAP: + /* + * PCIe requires the clock power management capability to be + * hard-wired to zero for downstream ports + */ + *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) & + ~PCI_EXP_LNKCAP_CLKPM; + break; + + case PCISWCAP_EXP_LNKCTL: + *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); + break; + + case PCISWCAP_EXP_SLTCAP: + *value = bridge->pcie_sltcap; + break; + + case PCISWCAP_EXP_SLTCTL: + *value = PCI_EXP_SLTSTA_PDS << 16; + break; + + case PCISWCAP_EXP_RTCTL: + *value = bridge->pcie_rtctl; + break; + + case PCISWCAP_EXP_RTSTA: + *value = mvebu_readl(port, PCIE_RC_RTSTA); + break; + + /* PCIe requires the v2 fields to be hard-wired to zero */ + case PCISWCAP_EXP_DEVCAP2: + case PCISWCAP_EXP_DEVCTL2: + case PCISWCAP_EXP_LNKCAP2: + case PCISWCAP_EXP_LNKCTL2: + case PCISWCAP_EXP_SLTCAP2: + case PCISWCAP_EXP_SLTCTL2: + default: + /* + * PCI defines configuration read accesses to reserved or + * unimplemented registers to read as zero and complete + * normally. + */ + *value = 0; + return PCIBIOS_SUCCESSFUL; + } + + if (size == 2) + *value = (*value >> (8 * (where & 3))) & 0xffff; + else if (size == 1) + *value = (*value >> (8 * (where & 3))) & 0xff; + + return PCIBIOS_SUCCESSFUL; +} + +/* Write to the PCI-to-PCI bridge configuration space */ +static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port, + unsigned int where, int size, u32 value) +{ + struct mvebu_sw_pci_bridge *bridge = &port->bridge; + u32 mask, reg; + int err; + + if (size == 4) + mask = 0x0; + else if (size == 2) + mask = ~(0xffff << ((where & 3) * 8)); + else if (size == 1) + mask = ~(0xff << ((where & 3) * 8)); + else + return PCIBIOS_BAD_REGISTER_NUMBER; + + err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®); + if (err) + return err; + + value = (reg & mask) | value << ((where & 3) * 8); + + switch (where & ~3) { + case PCI_COMMAND: + { + u32 old = bridge->command; + + if (!mvebu_has_ioport(port)) + value &= ~PCI_COMMAND_IO; + + bridge->command = value & 0xffff; + if ((old ^ bridge->command) & PCI_COMMAND_IO) + mvebu_pcie_handle_iobase_change(port); + if ((old ^ bridge->command) & PCI_COMMAND_MEMORY) + mvebu_pcie_handle_membase_change(port); + break; + } + + case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: + bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value; + break; + + case PCI_IO_BASE: + /* + * We also keep bit 1 set, it is a read-only bit that + * indicates we support 32 bits addressing for the + * I/O + */ + bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32; + bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32; + mvebu_pcie_handle_iobase_change(port); + break; + + case PCI_MEMORY_BASE: + bridge->membase = value & 0xffff; + bridge->memlimit = value >> 16; + mvebu_pcie_handle_membase_change(port); + break; + + case PCI_IO_BASE_UPPER16: + bridge->iobaseupper = value & 0xffff; + bridge->iolimitupper = value >> 16; + mvebu_pcie_handle_iobase_change(port); + break; + + case PCI_PRIMARY_BUS: + bridge->primary_bus = value & 0xff; + bridge->secondary_bus = (value >> 8) & 0xff; + bridge->subordinate_bus = (value >> 16) & 0xff; + bridge->secondary_latency_timer = (value >> 24) & 0xff; + mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus); + break; + + case PCISWCAP_EXP_DEVCTL: + /* + * Armada370 data says these bits must always + * be zero when in root complex mode. + */ + value &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE | + PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE); + + /* + * If the mask is 0xffff0000, then we only want to write + * the device control register, rather than clearing the + * RW1C bits in the device status register. Mask out the + * status register bits. + */ + if (mask == 0xffff0000) + value &= 0xffff; + + mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL); + break; + + case PCISWCAP_EXP_LNKCTL: + /* + * If we don't support CLKREQ, we must ensure that the + * CLKREQ enable bit always reads zero. Since we haven't + * had this capability, and it's dependent on board wiring, + * disable it for the time being. + */ + value &= ~PCI_EXP_LNKCTL_CLKREQ_EN; + + /* + * If the mask is 0xffff0000, then we only want to write + * the link control register, rather than clearing the + * RW1C bits in the link status register. Mask out the + * RW1C status register bits. + */ + if (mask == 0xffff0000) + value &= ~((PCI_EXP_LNKSTA_LABS | + PCI_EXP_LNKSTA_LBMS) << 16); + + mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); + break; + + case PCISWCAP_EXP_RTSTA: + mvebu_writel(port, value, PCIE_RC_RTSTA); + break; + + default: + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie, + struct pci_bus *bus, + int devfn) +{ + int i; + + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + + if (bus->number == 0 && port->devfn == devfn) + return port; + if (bus->number != 0 && + bus->number >= port->bridge.secondary_bus && + bus->number <= port->bridge.subordinate_bus) + return port; + } + + return NULL; +} + +/* PCI configuration space write function */ +static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + struct mvebu_pcie *pcie = bus->sysdata; + struct mvebu_pcie_port *port; + int ret; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Access the emulated PCI-to-PCI bridge */ + if (bus->number == 0) + return mvebu_sw_pci_bridge_write(port, where, size, val); + + if (!mvebu_pcie_link_up(port)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Access the real PCIe interface */ + ret = mvebu_pcie_hw_wr_conf(port, bus, devfn, + where, size, val); + + return ret; +} + +/* PCI configuration space read function */ +static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct mvebu_pcie *pcie = bus->sysdata; + struct mvebu_pcie_port *port; + int ret; + + port = mvebu_pcie_find_port(pcie, bus, devfn); + if (!port) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* Access the emulated PCI-to-PCI bridge */ + if (bus->number == 0) + return mvebu_sw_pci_bridge_read(port, where, size, val); + + if (!mvebu_pcie_link_up(port)) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* Access the real PCIe interface */ + ret = mvebu_pcie_hw_rd_conf(port, bus, devfn, + where, size, val); + + return ret; +} + +static struct pci_ops mvebu_pcie_ops = { + .read = mvebu_pcie_rd_conf, + .write = mvebu_pcie_wr_conf, +}; + +static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align) +{ + if (dev->bus->number != 0) + return start; + + /* + * On the PCI-to-PCI bridge side, the I/O windows must have at + * least a 64 KB size and the memory windows must have at + * least a 1 MB size. Moreover, MBus windows need to have a + * base address aligned on their size, and their size must be + * a power of two. This means that if the BAR doesn't have a + * power of two size, several MBus windows will actually be + * created. We need to ensure that the biggest MBus window + * (which will be the first one) is aligned on its size, which + * explains the rounddown_pow_of_two() being done here. + */ + if (res->flags & IORESOURCE_IO) + return round_up(start, max_t(resource_size_t, SZ_64K, + rounddown_pow_of_two(size))); + else if (res->flags & IORESOURCE_MEM) + return round_up(start, max_t(resource_size_t, SZ_1M, + rounddown_pow_of_two(size))); + else + return start; +} + +static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev, + struct device_node *np, + struct mvebu_pcie_port *port) +{ + struct resource regs; + int ret = 0; + + ret = of_address_to_resource(np, 0, ®s); + if (ret) + return ERR_PTR(ret); + + return devm_ioremap_resource(&pdev->dev, ®s); +} + +#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03) +#define DT_TYPE_IO 0x1 +#define DT_TYPE_MEM32 0x2 +#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF) +#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF) + +static int mvebu_get_tgt_attr(struct device_node *np, int devfn, + unsigned long type, + unsigned int *tgt, + unsigned int *attr) +{ + const int na = 3, ns = 2; + const __be32 *range; + int rlen, nranges, rangesz, pna, i; + + *tgt = -1; + *attr = -1; + + range = of_get_property(np, "ranges", &rlen); + if (!range) + return -EINVAL; + + pna = of_n_addr_cells(np); + rangesz = pna + na + ns; + nranges = rlen / sizeof(__be32) / rangesz; + + for (i = 0; i < nranges; i++, range += rangesz) { + u32 flags = of_read_number(range, 1); + u32 slot = of_read_number(range + 1, 1); + u64 cpuaddr = of_read_number(range + na, pna); + unsigned long rtype; + + if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO) + rtype = IORESOURCE_IO; + else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32) + rtype = IORESOURCE_MEM; + else + continue; + + if (slot == PCI_SLOT(devfn) && type == rtype) { + *tgt = DT_CPUADDR_TO_TARGET(cpuaddr); + *attr = DT_CPUADDR_TO_ATTR(cpuaddr); + return 0; + } + } + + return -ENOENT; +} + +#ifdef CONFIG_PM_SLEEP +static int mvebu_pcie_suspend(struct device *dev) +{ + struct mvebu_pcie *pcie; + int i; + + pcie = dev_get_drvdata(dev); + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = pcie->ports + i; + port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF); + } + + return 0; +} + +static int mvebu_pcie_resume(struct device *dev) +{ + struct mvebu_pcie *pcie; + int i; + + pcie = dev_get_drvdata(dev); + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = pcie->ports + i; + mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF); + mvebu_pcie_setup_hw(port); + } + + return 0; +} +#endif + +static void mvebu_pcie_port_clk_put(void *data) +{ + struct mvebu_pcie_port *port = data; + + clk_put(port->clk); +} + +static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, + struct mvebu_pcie_port *port, struct device_node *child) +{ + struct device *dev = &pcie->pdev->dev; + enum of_gpio_flags flags; + int reset_gpio, ret; + + port->pcie = pcie; + + if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) { + dev_warn(dev, "ignoring %pOF, missing pcie-port property\n", + child); + goto skip; + } + + if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane)) + port->lane = 0; + + port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port, + port->lane); + if (!port->name) { + ret = -ENOMEM; + goto err; + } + + port->devfn = of_pci_get_devfn(child); + if (port->devfn < 0) + goto skip; + + ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM, + &port->mem_target, &port->mem_attr); + if (ret < 0) { + dev_err(dev, "%s: cannot get tgt/attr for mem window\n", + port->name); + goto skip; + } + + if (resource_size(&pcie->io) != 0) { + mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO, + &port->io_target, &port->io_attr); + } else { + port->io_target = -1; + port->io_attr = -1; + } + + reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags); + if (reset_gpio == -EPROBE_DEFER) { + ret = reset_gpio; + goto err; + } + + if (gpio_is_valid(reset_gpio)) { + unsigned long gpio_flags; + + port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset", + port->name); + if (!port->reset_name) { + ret = -ENOMEM; + goto err; + } + + if (flags & OF_GPIO_ACTIVE_LOW) { + dev_info(dev, "%pOF: reset gpio is active low\n", + child); + gpio_flags = GPIOF_ACTIVE_LOW | + GPIOF_OUT_INIT_LOW; + } else { + gpio_flags = GPIOF_OUT_INIT_HIGH; + } + + ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags, + port->reset_name); + if (ret) { + if (ret == -EPROBE_DEFER) + goto err; + goto skip; + } + + port->reset_gpio = gpio_to_desc(reset_gpio); + } + + port->clk = of_clk_get_by_name(child, NULL); + if (IS_ERR(port->clk)) { + dev_err(dev, "%s: cannot get clock\n", port->name); + goto skip; + } + + ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port); + if (ret < 0) { + clk_put(port->clk); + goto err; + } + + return 1; + +skip: + ret = 0; + + /* In the case of skipping, we need to free these */ + devm_kfree(dev, port->reset_name); + port->reset_name = NULL; + devm_kfree(dev, port->name); + port->name = NULL; + +err: + return ret; +} + +/* + * Power up a PCIe port. PCIe requires the refclk to be stable for 100µs + * prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications + * of the PCI Express Card Electromechanical Specification, 1.1. + */ +static int mvebu_pcie_powerup(struct mvebu_pcie_port *port) +{ + int ret; + + ret = clk_prepare_enable(port->clk); + if (ret < 0) + return ret; + + if (port->reset_gpio) { + u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; + + of_property_read_u32(port->dn, "reset-delay-us", + &reset_udelay); + + udelay(100); + + gpiod_set_value_cansleep(port->reset_gpio, 0); + msleep(reset_udelay / 1000); + } + + return 0; +} + +/* + * Power down a PCIe port. Strictly, PCIe requires us to place the card + * in D3hot state before asserting PERST#. + */ +static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port) +{ + gpiod_set_value_cansleep(port->reset_gpio, 1); + + clk_disable_unprepare(port->clk); +} + +/* + * We can't use devm_of_pci_get_host_bridge_resources() because we + * need to parse our special DT properties encoding the MEM and IO + * apertures. + */ +static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie) +{ + struct device *dev = &pcie->pdev->dev; + struct device_node *np = dev->of_node; + int ret; + + INIT_LIST_HEAD(&pcie->resources); + + /* Get the bus range */ + ret = of_pci_parse_bus_range(np, &pcie->busn); + if (ret) { + dev_err(dev, "failed to parse bus-range property: %d\n", ret); + return ret; + } + pci_add_resource(&pcie->resources, &pcie->busn); + + /* Get the PCIe memory aperture */ + mvebu_mbus_get_pcie_mem_aperture(&pcie->mem); + if (resource_size(&pcie->mem) == 0) { + dev_err(dev, "invalid memory aperture size\n"); + return -EINVAL; + } + + pcie->mem.name = "PCI MEM"; + pci_add_resource(&pcie->resources, &pcie->mem); + + /* Get the PCIe IO aperture */ + mvebu_mbus_get_pcie_io_aperture(&pcie->io); + + if (resource_size(&pcie->io) != 0) { + pcie->realio.flags = pcie->io.flags; + pcie->realio.start = PCIBIOS_MIN_IO; + pcie->realio.end = min_t(resource_size_t, + IO_SPACE_LIMIT - SZ_64K, + resource_size(&pcie->io) - 1); + pcie->realio.name = "PCI I/O"; + + pci_add_resource(&pcie->resources, &pcie->realio); + } + + return devm_request_pci_bus_resources(dev, &pcie->resources); +} + +/* + * This is a copy of pci_host_probe(), except that it does the I/O + * remap as the last step, once we are sure we won't fail. + * + * It should be removed once the I/O remap error handling issue has + * been sorted out. + */ +static int mvebu_pci_host_probe(struct pci_host_bridge *bridge) +{ + struct mvebu_pcie *pcie; + struct pci_bus *bus, *child; + int ret; + + ret = pci_scan_root_bus_bridge(bridge); + if (ret < 0) { + dev_err(bridge->dev.parent, "Scanning root bridge failed"); + return ret; + } + + pcie = pci_host_bridge_priv(bridge); + if (resource_size(&pcie->io) != 0) { + unsigned int i; + + for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K) + pci_ioremap_io(i, pcie->io.start + i); + } + + bus = bridge->bus; + + /* + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). + */ + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } + + pci_bus_add_devices(bus); + return 0; +} + +static int mvebu_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mvebu_pcie *pcie; + struct pci_host_bridge *bridge; + struct device_node *np = dev->of_node; + struct device_node *child; + int num, i, ret; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie)); + if (!bridge) + return -ENOMEM; + + pcie = pci_host_bridge_priv(bridge); + pcie->pdev = pdev; + platform_set_drvdata(pdev, pcie); + + ret = mvebu_pcie_parse_request_resources(pcie); + if (ret) + return ret; + + num = of_get_available_child_count(np); + + pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL); + if (!pcie->ports) + return -ENOMEM; + + i = 0; + for_each_available_child_of_node(np, child) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + + ret = mvebu_pcie_parse_port(pcie, port, child); + if (ret < 0) { + of_node_put(child); + return ret; + } else if (ret == 0) { + continue; + } + + port->dn = child; + i++; + } + pcie->nports = i; + + for (i = 0; i < pcie->nports; i++) { + struct mvebu_pcie_port *port = &pcie->ports[i]; + + child = port->dn; + if (!child) + continue; + + ret = mvebu_pcie_powerup(port); + if (ret < 0) + continue; + + port->base = mvebu_pcie_map_registers(pdev, child, port); + if (IS_ERR(port->base)) { + dev_err(dev, "%s: cannot map registers\n", port->name); + port->base = NULL; + mvebu_pcie_powerdown(port); + continue; + } + + mvebu_pcie_setup_hw(port); + mvebu_pcie_set_local_dev_nr(port, 1); + mvebu_sw_pci_bridge_init(port); + } + + pcie->nports = i; + + list_splice_init(&pcie->resources, &bridge->windows); + bridge->dev.parent = dev; + bridge->sysdata = pcie; + bridge->busnr = 0; + bridge->ops = &mvebu_pcie_ops; + bridge->map_irq = of_irq_parse_and_map_pci; + bridge->swizzle_irq = pci_common_swizzle; + bridge->align_resource = mvebu_pcie_align_resource; + bridge->msi = pcie->msi; + + return mvebu_pci_host_probe(bridge); +} + +static const struct of_device_id mvebu_pcie_of_match_table[] = { + { .compatible = "marvell,armada-xp-pcie", }, + { .compatible = "marvell,armada-370-pcie", }, + { .compatible = "marvell,dove-pcie", }, + { .compatible = "marvell,kirkwood-pcie", }, + {}, +}; + +static const struct dev_pm_ops mvebu_pcie_pm_ops = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume) +}; + +static struct platform_driver mvebu_pcie_driver = { + .driver = { + .name = "mvebu-pcie", + .of_match_table = mvebu_pcie_of_match_table, + /* driver unloading/unbinding currently not supported */ + .suppress_bind_attrs = true, + .pm = &mvebu_pcie_pm_ops, + }, + .probe = mvebu_pcie_probe, +}; +builtin_platform_driver(mvebu_pcie_driver); |