diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/ssb/main.c | 1335 |
1 files changed, 1335 insertions, 0 deletions
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c new file mode 100644 index 000000000..0a26984ac --- /dev/null +++ b/drivers/ssb/main.c @@ -0,0 +1,1335 @@ +/* + * Sonics Silicon Backplane + * Subsystem core + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "ssb_private.h" + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/ssb/ssb.h> +#include <linux/ssb/ssb_regs.h> +#include <linux/ssb/ssb_driver_gige.h> +#include <linux/dma-mapping.h> +#include <linux/pci.h> +#include <linux/mmc/sdio_func.h> +#include <linux/slab.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + + +MODULE_DESCRIPTION("Sonics Silicon Backplane driver"); +MODULE_LICENSE("GPL"); + + +/* Temporary list of yet-to-be-attached buses */ +static LIST_HEAD(attach_queue); +/* List if running buses */ +static LIST_HEAD(buses); +/* Software ID counter */ +static unsigned int next_busnumber; +/* buses_mutes locks the two buslists and the next_busnumber. + * Don't lock this directly, but use ssb_buses_[un]lock() below. */ +static DEFINE_MUTEX(buses_mutex); + +/* There are differences in the codeflow, if the bus is + * initialized from early boot, as various needed services + * are not available early. This is a mechanism to delay + * these initializations to after early boot has finished. + * It's also used to avoid mutex locking, as that's not + * available and needed early. */ +static bool ssb_is_early_boot = 1; + +static void ssb_buses_lock(void); +static void ssb_buses_unlock(void); + + +#ifdef CONFIG_SSB_PCIHOST +struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev) +{ + struct ssb_bus *bus; + + ssb_buses_lock(); + list_for_each_entry(bus, &buses, list) { + if (bus->bustype == SSB_BUSTYPE_PCI && + bus->host_pci == pdev) + goto found; + } + bus = NULL; +found: + ssb_buses_unlock(); + + return bus; +} +#endif /* CONFIG_SSB_PCIHOST */ + +#ifdef CONFIG_SSB_PCMCIAHOST +struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev) +{ + struct ssb_bus *bus; + + ssb_buses_lock(); + list_for_each_entry(bus, &buses, list) { + if (bus->bustype == SSB_BUSTYPE_PCMCIA && + bus->host_pcmcia == pdev) + goto found; + } + bus = NULL; +found: + ssb_buses_unlock(); + + return bus; +} +#endif /* CONFIG_SSB_PCMCIAHOST */ + +int ssb_for_each_bus_call(unsigned long data, + int (*func)(struct ssb_bus *bus, unsigned long data)) +{ + struct ssb_bus *bus; + int res; + + ssb_buses_lock(); + list_for_each_entry(bus, &buses, list) { + res = func(bus, data); + if (res >= 0) { + ssb_buses_unlock(); + return res; + } + } + ssb_buses_unlock(); + + return -ENODEV; +} + +static struct ssb_device *ssb_device_get(struct ssb_device *dev) +{ + if (dev) + get_device(dev->dev); + return dev; +} + +static void ssb_device_put(struct ssb_device *dev) +{ + if (dev) + put_device(dev->dev); +} + +static int ssb_device_resume(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv; + int err = 0; + + if (dev->driver) { + ssb_drv = drv_to_ssb_drv(dev->driver); + if (ssb_drv && ssb_drv->resume) + err = ssb_drv->resume(ssb_dev); + if (err) + goto out; + } +out: + return err; +} + +static int ssb_device_suspend(struct device *dev, pm_message_t state) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv; + int err = 0; + + if (dev->driver) { + ssb_drv = drv_to_ssb_drv(dev->driver); + if (ssb_drv && ssb_drv->suspend) + err = ssb_drv->suspend(ssb_dev, state); + if (err) + goto out; + } +out: + return err; +} + +int ssb_bus_resume(struct ssb_bus *bus) +{ + int err; + + /* Reset HW state information in memory, so that HW is + * completely reinitialized. */ + bus->mapped_device = NULL; +#ifdef CONFIG_SSB_DRIVER_PCICORE + bus->pcicore.setup_done = 0; +#endif + + err = ssb_bus_powerup(bus, 0); + if (err) + return err; + err = ssb_pcmcia_hardware_setup(bus); + if (err) { + ssb_bus_may_powerdown(bus); + return err; + } + ssb_chipco_resume(&bus->chipco); + ssb_bus_may_powerdown(bus); + + return 0; +} +EXPORT_SYMBOL(ssb_bus_resume); + +int ssb_bus_suspend(struct ssb_bus *bus) +{ + ssb_chipco_suspend(&bus->chipco); + ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); + + return 0; +} +EXPORT_SYMBOL(ssb_bus_suspend); + +#ifdef CONFIG_SSB_SPROM +/** ssb_devices_freeze - Freeze all devices on the bus. + * + * After freezing no device driver will be handling a device + * on this bus anymore. ssb_devices_thaw() must be called after + * a successful freeze to reactivate the devices. + * + * @bus: The bus. + * @ctx: Context structure. Pass this to ssb_devices_thaw(). + */ +int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) +{ + struct ssb_device *sdev; + struct ssb_driver *sdrv; + unsigned int i; + + memset(ctx, 0, sizeof(*ctx)); + ctx->bus = bus; + WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); + + for (i = 0; i < bus->nr_devices; i++) { + sdev = ssb_device_get(&bus->devices[i]); + + if (!sdev->dev || !sdev->dev->driver || + !device_is_registered(sdev->dev)) { + ssb_device_put(sdev); + continue; + } + sdrv = drv_to_ssb_drv(sdev->dev->driver); + if (WARN_ON(!sdrv->remove)) + continue; + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } + + return 0; +} + +/** ssb_devices_thaw - Unfreeze all devices on the bus. + * + * This will re-attach the device drivers and re-init the devices. + * + * @ctx: The context structure from ssb_devices_freeze() + */ +int ssb_devices_thaw(struct ssb_freeze_context *ctx) +{ + struct ssb_bus *bus = ctx->bus; + struct ssb_device *sdev; + struct ssb_driver *sdrv; + unsigned int i; + int err, result = 0; + + for (i = 0; i < bus->nr_devices; i++) { + if (!ctx->device_frozen[i]) + continue; + sdev = &bus->devices[i]; + + if (WARN_ON(!sdev->dev || !sdev->dev->driver)) + continue; + sdrv = drv_to_ssb_drv(sdev->dev->driver); + if (WARN_ON(!sdrv || !sdrv->probe)) + continue; + + err = sdrv->probe(sdev, &sdev->id); + if (err) { + dev_err(sdev->dev, + "Failed to thaw device %s\n", + dev_name(sdev->dev)); + result = err; + } + ssb_device_put(sdev); + } + + return result; +} +#endif /* CONFIG_SSB_SPROM */ + +static void ssb_device_shutdown(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv; + + if (!dev->driver) + return; + ssb_drv = drv_to_ssb_drv(dev->driver); + if (ssb_drv && ssb_drv->shutdown) + ssb_drv->shutdown(ssb_dev); +} + +static int ssb_device_remove(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); + + if (ssb_drv && ssb_drv->remove) + ssb_drv->remove(ssb_dev); + ssb_device_put(ssb_dev); + + return 0; +} + +static int ssb_device_probe(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); + int err = 0; + + ssb_device_get(ssb_dev); + if (ssb_drv && ssb_drv->probe) + err = ssb_drv->probe(ssb_dev, &ssb_dev->id); + if (err) + ssb_device_put(ssb_dev); + + return err; +} + +static int ssb_match_devid(const struct ssb_device_id *tabid, + const struct ssb_device_id *devid) +{ + if ((tabid->vendor != devid->vendor) && + tabid->vendor != SSB_ANY_VENDOR) + return 0; + if ((tabid->coreid != devid->coreid) && + tabid->coreid != SSB_ANY_ID) + return 0; + if ((tabid->revision != devid->revision) && + tabid->revision != SSB_ANY_REV) + return 0; + return 1; +} + +static int ssb_bus_match(struct device *dev, struct device_driver *drv) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv); + const struct ssb_device_id *id; + + for (id = ssb_drv->id_table; + id->vendor || id->coreid || id->revision; + id++) { + if (ssb_match_devid(id, &ssb_dev->id)) + return 1; /* found */ + } + + return 0; +} + +static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + + if (!dev) + return -ENODEV; + + return add_uevent_var(env, + "MODALIAS=ssb:v%04Xid%04Xrev%02X", + ssb_dev->id.vendor, ssb_dev->id.coreid, + ssb_dev->id.revision); +} + +#define ssb_config_attr(attrib, field, format_string) \ +static ssize_t \ +attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \ +} \ +static DEVICE_ATTR_RO(attrib); + +ssb_config_attr(core_num, core_index, "%u\n") +ssb_config_attr(coreid, id.coreid, "0x%04x\n") +ssb_config_attr(vendor, id.vendor, "0x%04x\n") +ssb_config_attr(revision, id.revision, "%u\n") +ssb_config_attr(irq, irq, "%u\n") +static ssize_t +name_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%s\n", + ssb_core_name(dev_to_ssb_dev(dev)->id.coreid)); +} +static DEVICE_ATTR_RO(name); + +static struct attribute *ssb_device_attrs[] = { + &dev_attr_name.attr, + &dev_attr_core_num.attr, + &dev_attr_coreid.attr, + &dev_attr_vendor.attr, + &dev_attr_revision.attr, + &dev_attr_irq.attr, + NULL, +}; +ATTRIBUTE_GROUPS(ssb_device); + +static struct bus_type ssb_bustype = { + .name = "ssb", + .match = ssb_bus_match, + .probe = ssb_device_probe, + .remove = ssb_device_remove, + .shutdown = ssb_device_shutdown, + .suspend = ssb_device_suspend, + .resume = ssb_device_resume, + .uevent = ssb_device_uevent, + .dev_groups = ssb_device_groups, +}; + +static void ssb_buses_lock(void) +{ + /* See the comment at the ssb_is_early_boot definition */ + if (!ssb_is_early_boot) + mutex_lock(&buses_mutex); +} + +static void ssb_buses_unlock(void) +{ + /* See the comment at the ssb_is_early_boot definition */ + if (!ssb_is_early_boot) + mutex_unlock(&buses_mutex); +} + +static void ssb_devices_unregister(struct ssb_bus *bus) +{ + struct ssb_device *sdev; + int i; + + for (i = bus->nr_devices - 1; i >= 0; i--) { + sdev = &(bus->devices[i]); + if (sdev->dev) + device_unregister(sdev->dev); + } + +#ifdef CONFIG_SSB_EMBEDDED + if (bus->bustype == SSB_BUSTYPE_SSB) + platform_device_unregister(bus->watchdog); +#endif +} + +void ssb_bus_unregister(struct ssb_bus *bus) +{ + int err; + + err = ssb_gpio_unregister(bus); + if (err == -EBUSY) + pr_debug("Some GPIOs are still in use\n"); + else if (err) + pr_debug("Can not unregister GPIO driver: %i\n", err); + + ssb_buses_lock(); + ssb_devices_unregister(bus); + list_del(&bus->list); + ssb_buses_unlock(); + + ssb_pcmcia_exit(bus); + ssb_pci_exit(bus); + ssb_iounmap(bus); +} +EXPORT_SYMBOL(ssb_bus_unregister); + +static void ssb_release_dev(struct device *dev) +{ + struct __ssb_dev_wrapper *devwrap; + + devwrap = container_of(dev, struct __ssb_dev_wrapper, dev); + kfree(devwrap); +} + +static int ssb_devices_register(struct ssb_bus *bus) +{ + struct ssb_device *sdev; + struct device *dev; + struct __ssb_dev_wrapper *devwrap; + int i, err = 0; + int dev_idx = 0; + + for (i = 0; i < bus->nr_devices; i++) { + sdev = &(bus->devices[i]); + + /* We don't register SSB-system devices to the kernel, + * as the drivers for them are built into SSB. */ + switch (sdev->id.coreid) { + case SSB_DEV_CHIPCOMMON: + case SSB_DEV_PCI: + case SSB_DEV_PCIE: + case SSB_DEV_PCMCIA: + case SSB_DEV_MIPS: + case SSB_DEV_MIPS_3302: + case SSB_DEV_EXTIF: + continue; + } + + devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); + if (!devwrap) { + err = -ENOMEM; + goto error; + } + dev = &devwrap->dev; + devwrap->sdev = sdev; + + dev->release = ssb_release_dev; + dev->bus = &ssb_bustype; + dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx); + + switch (bus->bustype) { + case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST + sdev->irq = bus->host_pci->irq; + dev->parent = &bus->host_pci->dev; + sdev->dma_dev = dev->parent; +#endif + break; + case SSB_BUSTYPE_PCMCIA: +#ifdef CONFIG_SSB_PCMCIAHOST + sdev->irq = bus->host_pcmcia->irq; + dev->parent = &bus->host_pcmcia->dev; +#endif + break; + case SSB_BUSTYPE_SDIO: +#ifdef CONFIG_SSB_SDIOHOST + dev->parent = &bus->host_sdio->dev; +#endif + break; + case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; + sdev->dma_dev = dev; + break; + } + + sdev->dev = dev; + err = device_register(dev); + if (err) { + pr_err("Could not register %s\n", dev_name(dev)); + /* Set dev to NULL to not unregister + * dev on error unwinding. */ + sdev->dev = NULL; + put_device(dev); + goto error; + } + dev_idx++; + } + +#ifdef CONFIG_SSB_DRIVER_MIPS + if (bus->mipscore.pflash.present) { + err = platform_device_register(&ssb_pflash_dev); + if (err) + pr_err("Error registering parallel flash\n"); + } +#endif + +#ifdef CONFIG_SSB_SFLASH + if (bus->mipscore.sflash.present) { + err = platform_device_register(&ssb_sflash_dev); + if (err) + pr_err("Error registering serial flash\n"); + } +#endif + + return 0; +error: + /* Unwind the already registered devices. */ + ssb_devices_unregister(bus); + return err; +} + +/* Needs ssb_buses_lock() */ +static int ssb_attach_queued_buses(void) +{ + struct ssb_bus *bus, *n; + int err = 0; + int drop_them_all = 0; + + list_for_each_entry_safe(bus, n, &attach_queue, list) { + if (drop_them_all) { + list_del(&bus->list); + continue; + } + /* Can't init the PCIcore in ssb_bus_register(), as that + * is too early in boot for embedded systems + * (no udelay() available). So do it here in attach stage. + */ + err = ssb_bus_powerup(bus, 0); + if (err) + goto error; + ssb_pcicore_init(&bus->pcicore); + if (bus->bustype == SSB_BUSTYPE_SSB) + ssb_watchdog_register(bus); + + err = ssb_gpio_init(bus); + if (err == -ENOTSUPP) + pr_debug("GPIO driver not activated\n"); + else if (err) + pr_debug("Error registering GPIO driver: %i\n", err); + + ssb_bus_may_powerdown(bus); + + err = ssb_devices_register(bus); +error: + if (err) { + drop_them_all = 1; + list_del(&bus->list); + continue; + } + list_move_tail(&bus->list, &buses); + } + + return err; +} + +static int ssb_fetch_invariants(struct ssb_bus *bus, + ssb_invariants_func_t get_invariants) +{ + struct ssb_init_invariants iv; + int err; + + memset(&iv, 0, sizeof(iv)); + err = get_invariants(bus, &iv); + if (err) + goto out; + memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); + memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); + bus->has_cardbus_slot = iv.has_cardbus_slot; +out: + return err; +} + +static int __maybe_unused +ssb_bus_register(struct ssb_bus *bus, + ssb_invariants_func_t get_invariants, + unsigned long baseaddr) +{ + int err; + + spin_lock_init(&bus->bar_lock); + INIT_LIST_HEAD(&bus->list); +#ifdef CONFIG_SSB_EMBEDDED + spin_lock_init(&bus->gpio_lock); +#endif + + /* Powerup the bus */ + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto out; + + /* Init SDIO-host device (if any), before the scan */ + err = ssb_sdio_init(bus); + if (err) + goto err_disable_xtal; + + ssb_buses_lock(); + bus->busnumber = next_busnumber; + /* Scan for devices (cores) */ + err = ssb_bus_scan(bus, baseaddr); + if (err) + goto err_sdio_exit; + + /* Init PCI-host device (if any) */ + err = ssb_pci_init(bus); + if (err) + goto err_unmap; + /* Init PCMCIA-host device (if any) */ + err = ssb_pcmcia_init(bus); + if (err) + goto err_pci_exit; + + /* Initialize basic system devices (if available) */ + err = ssb_bus_powerup(bus, 0); + if (err) + goto err_pcmcia_exit; + ssb_chipcommon_init(&bus->chipco); + ssb_extif_init(&bus->extif); + ssb_mipscore_init(&bus->mipscore); + err = ssb_fetch_invariants(bus, get_invariants); + if (err) { + ssb_bus_may_powerdown(bus); + goto err_pcmcia_exit; + } + ssb_bus_may_powerdown(bus); + + /* Queue it for attach. + * See the comment at the ssb_is_early_boot definition. */ + list_add_tail(&bus->list, &attach_queue); + if (!ssb_is_early_boot) { + /* This is not early boot, so we must attach the bus now */ + err = ssb_attach_queued_buses(); + if (err) + goto err_dequeue; + } + next_busnumber++; + ssb_buses_unlock(); + +out: + return err; + +err_dequeue: + list_del(&bus->list); +err_pcmcia_exit: + ssb_pcmcia_exit(bus); +err_pci_exit: + ssb_pci_exit(bus); +err_unmap: + ssb_iounmap(bus); +err_sdio_exit: + ssb_sdio_exit(bus); +err_disable_xtal: + ssb_buses_unlock(); + ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); + return err; +} + +#ifdef CONFIG_SSB_PCIHOST +int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci) +{ + int err; + + bus->bustype = SSB_BUSTYPE_PCI; + bus->host_pci = host_pci; + bus->ops = &ssb_pci_ops; + + err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); + if (!err) { + dev_info(&host_pci->dev, + "Sonics Silicon Backplane found on PCI device %s\n", + dev_name(&host_pci->dev)); + } else { + dev_err(&host_pci->dev, + "Failed to register PCI version of SSB with error %d\n", + err); + } + + return err; +} +#endif /* CONFIG_SSB_PCIHOST */ + +#ifdef CONFIG_SSB_PCMCIAHOST +int ssb_bus_pcmciabus_register(struct ssb_bus *bus, + struct pcmcia_device *pcmcia_dev, + unsigned long baseaddr) +{ + int err; + + bus->bustype = SSB_BUSTYPE_PCMCIA; + bus->host_pcmcia = pcmcia_dev; + bus->ops = &ssb_pcmcia_ops; + + err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); + if (!err) { + dev_info(&pcmcia_dev->dev, + "Sonics Silicon Backplane found on PCMCIA device %s\n", + pcmcia_dev->devname); + } + + return err; +} +#endif /* CONFIG_SSB_PCMCIAHOST */ + +#ifdef CONFIG_SSB_SDIOHOST +int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, + unsigned int quirks) +{ + int err; + + bus->bustype = SSB_BUSTYPE_SDIO; + bus->host_sdio = func; + bus->ops = &ssb_sdio_ops; + bus->quirks = quirks; + + err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); + if (!err) { + dev_info(&func->dev, + "Sonics Silicon Backplane found on SDIO device %s\n", + sdio_func_id(func)); + } + + return err; +} +EXPORT_SYMBOL(ssb_bus_sdiobus_register); +#endif /* CONFIG_SSB_PCMCIAHOST */ + +#ifdef CONFIG_SSB_HOST_SOC +int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr) +{ + int err; + + bus->bustype = SSB_BUSTYPE_SSB; + bus->ops = &ssb_host_soc_ops; + + err = ssb_bus_register(bus, ssb_host_soc_get_invariants, baseaddr); + if (!err) { + pr_info("Sonics Silicon Backplane found at address 0x%08lX\n", + baseaddr); + } + + return err; +} +#endif + +int __ssb_driver_register(struct ssb_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; + drv->drv.bus = &ssb_bustype; + drv->drv.owner = owner; + + return driver_register(&drv->drv); +} +EXPORT_SYMBOL(__ssb_driver_register); + +void ssb_driver_unregister(struct ssb_driver *drv) +{ + driver_unregister(&drv->drv); +} +EXPORT_SYMBOL(ssb_driver_unregister); + +void ssb_set_devtypedata(struct ssb_device *dev, void *data) +{ + struct ssb_bus *bus = dev->bus; + struct ssb_device *ent; + int i; + + for (i = 0; i < bus->nr_devices; i++) { + ent = &(bus->devices[i]); + if (ent->id.vendor != dev->id.vendor) + continue; + if (ent->id.coreid != dev->id.coreid) + continue; + + ent->devtypedata = data; + } +} +EXPORT_SYMBOL(ssb_set_devtypedata); + +static u32 clkfactor_f6_resolve(u32 v) +{ + /* map the magic values */ + switch (v) { + case SSB_CHIPCO_CLK_F6_2: + return 2; + case SSB_CHIPCO_CLK_F6_3: + return 3; + case SSB_CHIPCO_CLK_F6_4: + return 4; + case SSB_CHIPCO_CLK_F6_5: + return 5; + case SSB_CHIPCO_CLK_F6_6: + return 6; + case SSB_CHIPCO_CLK_F6_7: + return 7; + } + return 0; +} + +/* Calculate the speed the backplane would run at a given set of clockcontrol values */ +u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m) +{ + u32 n1, n2, clock, m1, m2, m3, mc; + + n1 = (n & SSB_CHIPCO_CLK_N1); + n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT); + + switch (plltype) { + case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ + if (m & SSB_CHIPCO_CLK_T6_MMASK) + return SSB_CHIPCO_CLK_T6_M1; + return SSB_CHIPCO_CLK_T6_M0; + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ + case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ + n1 = clkfactor_f6_resolve(n1); + n2 += SSB_CHIPCO_CLK_F5_BIAS; + break; + case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */ + n1 += SSB_CHIPCO_CLK_T2_BIAS; + n2 += SSB_CHIPCO_CLK_T2_BIAS; + WARN_ON(!((n1 >= 2) && (n1 <= 7))); + WARN_ON(!((n2 >= 5) && (n2 <= 23))); + break; + case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */ + return 100000000; + default: + WARN_ON(1); + } + + switch (plltype) { + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ + clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2; + break; + default: + clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2; + } + if (!clock) + return 0; + + m1 = (m & SSB_CHIPCO_CLK_M1); + m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT); + m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT); + mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT); + + switch (plltype) { + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ + case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ + m1 = clkfactor_f6_resolve(m1); + if ((plltype == SSB_PLLTYPE_1) || + (plltype == SSB_PLLTYPE_3)) + m2 += SSB_CHIPCO_CLK_F5_BIAS; + else + m2 = clkfactor_f6_resolve(m2); + m3 = clkfactor_f6_resolve(m3); + + switch (mc) { + case SSB_CHIPCO_CLK_MC_BYPASS: + return clock; + case SSB_CHIPCO_CLK_MC_M1: + return (clock / m1); + case SSB_CHIPCO_CLK_MC_M1M2: + return (clock / (m1 * m2)); + case SSB_CHIPCO_CLK_MC_M1M2M3: + return (clock / (m1 * m2 * m3)); + case SSB_CHIPCO_CLK_MC_M1M3: + return (clock / (m1 * m3)); + } + return 0; + case SSB_PLLTYPE_2: + m1 += SSB_CHIPCO_CLK_T2_BIAS; + m2 += SSB_CHIPCO_CLK_T2M2_BIAS; + m3 += SSB_CHIPCO_CLK_T2_BIAS; + WARN_ON(!((m1 >= 2) && (m1 <= 7))); + WARN_ON(!((m2 >= 3) && (m2 <= 10))); + WARN_ON(!((m3 >= 2) && (m3 <= 7))); + + if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP)) + clock /= m1; + if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP)) + clock /= m2; + if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP)) + clock /= m3; + return clock; + default: + WARN_ON(1); + } + return 0; +} + +/* Get the current speed the backplane is running at */ +u32 ssb_clockspeed(struct ssb_bus *bus) +{ + u32 rate; + u32 plltype; + u32 clkctl_n, clkctl_m; + + if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) + return ssb_pmu_get_controlclock(&bus->chipco); + + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); + else if (bus->chipco.dev) + ssb_chipco_get_clockcontrol(&bus->chipco, &plltype, + &clkctl_n, &clkctl_m); + else + return 0; + + if (bus->chip_id == 0x5365) { + rate = 100000000; + } else { + rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); + if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ + rate /= 2; + } + + return rate; +} +EXPORT_SYMBOL(ssb_clockspeed); + +static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) +{ + u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; + + /* The REJECT bit seems to be different for Backplane rev 2.3 */ + switch (rev) { + case SSB_IDLOW_SSBREV_22: + case SSB_IDLOW_SSBREV_24: + case SSB_IDLOW_SSBREV_26: + return SSB_TMSLOW_REJECT; + case SSB_IDLOW_SSBREV_23: + return SSB_TMSLOW_REJECT_23; + case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ + case SSB_IDLOW_SSBREV_27: /* same here */ + return SSB_TMSLOW_REJECT; /* this is a guess */ + case SSB_IDLOW_SSBREV: + break; + default: + WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); + } + return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); +} + +int ssb_device_is_enabled(struct ssb_device *dev) +{ + u32 val; + u32 reject; + + reject = ssb_tmslow_reject_bitmask(dev); + val = ssb_read32(dev, SSB_TMSLOW); + val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject; + + return (val == SSB_TMSLOW_CLOCK); +} +EXPORT_SYMBOL(ssb_device_is_enabled); + +static void ssb_flush_tmslow(struct ssb_device *dev) +{ + /* Make _really_ sure the device has finished the TMSLOW + * register write transaction, as we risk running into + * a machine check exception otherwise. + * Do this by reading the register back to commit the + * PCI write and delay an additional usec for the device + * to react to the change. */ + ssb_read32(dev, SSB_TMSLOW); + udelay(1); +} + +void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags) +{ + u32 val; + + ssb_device_disable(dev, core_specific_flags); + ssb_write32(dev, SSB_TMSLOW, + SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK | + SSB_TMSLOW_FGC | core_specific_flags); + ssb_flush_tmslow(dev); + + /* Clear SERR if set. This is a hw bug workaround. */ + if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR) + ssb_write32(dev, SSB_TMSHIGH, 0); + + val = ssb_read32(dev, SSB_IMSTATE); + if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) { + val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO); + ssb_write32(dev, SSB_IMSTATE, val); + } + + ssb_write32(dev, SSB_TMSLOW, + SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC | + core_specific_flags); + ssb_flush_tmslow(dev); + + ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK | + core_specific_flags); + ssb_flush_tmslow(dev); +} +EXPORT_SYMBOL(ssb_device_enable); + +/* Wait for bitmask in a register to get set or cleared. + * timeout is in units of ten-microseconds */ +static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask, + int timeout, int set) +{ + int i; + u32 val; + + for (i = 0; i < timeout; i++) { + val = ssb_read32(dev, reg); + if (set) { + if ((val & bitmask) == bitmask) + return 0; + } else { + if (!(val & bitmask)) + return 0; + } + udelay(10); + } + dev_err(dev->dev, + "Timeout waiting for bitmask %08X on register %04X to %s\n", + bitmask, reg, set ? "set" : "clear"); + + return -ETIMEDOUT; +} + +void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) +{ + u32 reject, val; + + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) + return; + + reject = ssb_tmslow_reject_bitmask(dev); + + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) { + ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); + ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1); + ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); + + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { + val = ssb_read32(dev, SSB_IMSTATE); + val |= SSB_IMSTATE_REJECT; + ssb_write32(dev, SSB_IMSTATE, val); + ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000, + 0); + } + + ssb_write32(dev, SSB_TMSLOW, + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | + reject | SSB_TMSLOW_RESET | + core_specific_flags); + ssb_flush_tmslow(dev); + + if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { + val = ssb_read32(dev, SSB_IMSTATE); + val &= ~SSB_IMSTATE_REJECT; + ssb_write32(dev, SSB_IMSTATE, val); + } + } + + ssb_write32(dev, SSB_TMSLOW, + reject | SSB_TMSLOW_RESET | + core_specific_flags); + ssb_flush_tmslow(dev); +} +EXPORT_SYMBOL(ssb_device_disable); + +/* Some chipsets need routing known for PCIe and 64-bit DMA */ +static bool ssb_dma_translation_special_bit(struct ssb_device *dev) +{ + u16 chip_id = dev->bus->chip_id; + + if (dev->id.coreid == SSB_DEV_80211) { + return (chip_id == 0x4322 || chip_id == 43221 || + chip_id == 43231 || chip_id == 43222); + } + + return false; +} + +u32 ssb_dma_translation(struct ssb_device *dev) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_SSB: + return 0; + case SSB_BUSTYPE_PCI: + if (pci_is_pcie(dev->bus->host_pci) && + ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { + return SSB_PCIE_DMA_H32; + } else { + if (ssb_dma_translation_special_bit(dev)) + return SSB_PCIE_DMA_H32; + else + return SSB_PCI_DMA; + } + default: + __ssb_dma_not_implemented(dev); + } + return 0; +} +EXPORT_SYMBOL(ssb_dma_translation); + +int ssb_bus_may_powerdown(struct ssb_bus *bus) +{ + struct ssb_chipcommon *cc; + int err = 0; + + /* On buses where more than one core may be working + * at a time, we must not powerdown stuff if there are + * still cores that may want to run. */ + if (bus->bustype == SSB_BUSTYPE_SSB) + goto out; + + cc = &bus->chipco; + + if (!cc->dev) + goto out; + if (cc->dev->id.revision < 5) + goto out; + + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); + if (err) + goto error; +out: + bus->powered_up = 0; + return err; +error: + pr_err("Bus powerdown failed\n"); + goto out; +} +EXPORT_SYMBOL(ssb_bus_may_powerdown); + +int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) +{ + int err; + enum ssb_clkmode mode; + + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto error; + + bus->powered_up = 1; + + mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; + ssb_chipco_set_clockmode(&bus->chipco, mode); + + return 0; +error: + pr_err("Bus powerup failed\n"); + return err; +} +EXPORT_SYMBOL(ssb_bus_powerup); + +static void ssb_broadcast_value(struct ssb_device *dev, + u32 address, u32 data) +{ +#ifdef CONFIG_SSB_DRIVER_PCICORE + /* This is used for both, PCI and ChipCommon core, so be careful. */ + BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); + BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); +#endif + + ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); + ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ + ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); + ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ +} + +void ssb_commit_settings(struct ssb_bus *bus) +{ + struct ssb_device *dev; + +#ifdef CONFIG_SSB_DRIVER_PCICORE + dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; +#else + dev = bus->chipco.dev; +#endif + if (WARN_ON(!dev)) + return; + /* This forces an update of the cached registers. */ + ssb_broadcast_value(dev, 0xFD8, 0); +} +EXPORT_SYMBOL(ssb_commit_settings); + +u32 ssb_admatch_base(u32 adm) +{ + u32 base = 0; + + switch (adm & SSB_ADM_TYPE) { + case SSB_ADM_TYPE0: + base = (adm & SSB_ADM_BASE0); + break; + case SSB_ADM_TYPE1: + WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + base = (adm & SSB_ADM_BASE1); + break; + case SSB_ADM_TYPE2: + WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + base = (adm & SSB_ADM_BASE2); + break; + default: + WARN_ON(1); + } + + return base; +} +EXPORT_SYMBOL(ssb_admatch_base); + +u32 ssb_admatch_size(u32 adm) +{ + u32 size = 0; + + switch (adm & SSB_ADM_TYPE) { + case SSB_ADM_TYPE0: + size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT); + break; + case SSB_ADM_TYPE1: + WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT); + break; + case SSB_ADM_TYPE2: + WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT); + break; + default: + WARN_ON(1); + } + size = (1 << (size + 1)); + + return size; +} +EXPORT_SYMBOL(ssb_admatch_size); + +static int __init ssb_modinit(void) +{ + int err; + + /* See the comment at the ssb_is_early_boot definition */ + ssb_is_early_boot = 0; + err = bus_register(&ssb_bustype); + if (err) + return err; + + /* Maybe we already registered some buses at early boot. + * Check for this and attach them + */ + ssb_buses_lock(); + err = ssb_attach_queued_buses(); + ssb_buses_unlock(); + if (err) { + bus_unregister(&ssb_bustype); + goto out; + } + + err = b43_pci_ssb_bridge_init(); + if (err) { + pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } + err = ssb_host_pcmcia_init(); + if (err) { + pr_err("PCMCIA host initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } + err = ssb_gige_init(); + if (err) { + pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } +out: + return err; +} +/* ssb must be initialized after PCI but before the ssb drivers. + * That means we must use some initcall between subsys_initcall + * and device_initcall. */ +fs_initcall(ssb_modinit); + +static void __exit ssb_modexit(void) +{ + ssb_gige_exit(); + ssb_host_pcmcia_exit(); + b43_pci_ssb_bridge_exit(); + bus_unregister(&ssb_bustype); +} +module_exit(ssb_modexit) |