diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/thermal/qcom/tsens-8960.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 000000000..0451277d3 --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,292 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include "tsens.h" + +#define CAL_MDEGC 30000 + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define STATUS_CNTL_ADDR_8064 0x3660 +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) +#define SENSOR0_EN BIT(3) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define MEASURE_PERIOD 1 +#define SENSOR0_SHIFT 3 + +/* INT_STATUS_ADDR bitmasks */ +#define MIN_STATUS_MASK BIT(0) +#define LOWER_STATUS_CLR BIT(1) +#define UPPER_STATUS_CLR BIT(2) +#define MAX_STATUS_MASK BIT(3) + +#define THRESHOLD_ADDR 0x3624 +/* THRESHOLD_ADDR bitmasks */ +#define THRESHOLD_MAX_LIMIT_SHIFT 24 +#define THRESHOLD_MIN_LIMIT_SHIFT 16 +#define THRESHOLD_UPPER_LIMIT_SHIFT 8 +#define THRESHOLD_LOWER_LIMIT_SHIFT 0 + +/* Initial temperature threshold values */ +#define LOWER_LIMIT_TH 0x50 +#define UPPER_LIMIT_TH 0xdf +#define MIN_LIMIT_TH 0x0 +#define MAX_LIMIT_TH 0xff + +#define S0_STATUS_ADDR 0x3628 +#define INT_STATUS_ADDR 0x363c +#define TRDY_MASK BIT(7) +#define TIMEOUT_US 100 + +static int suspend_8960(struct tsens_device *tmdev) +{ + int ret; + unsigned int mask; + struct regmap *map = tmdev->map; + + ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); + if (ret) + return ret; + + ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); + if (ret) + return ret; + + return 0; +} + +static int resume_8960(struct tsens_device *tmdev) +{ + int ret; + struct regmap *map = tmdev->map; + + ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + if (ret) + return ret; + + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (tmdev->num_sensors > 1) { + ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + if (ret) + return ret; + } + + ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold); + if (ret) + return ret; + + ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control); + if (ret) + return ret; + + return 0; +} + +static int enable_8960(struct tsens_device *tmdev, int id) +{ + int ret; + u32 reg, mask; + + ret = regmap_read(tmdev->map, CNTL_ADDR, ®); + if (ret) + return ret; + + mask = BIT(id + SENSOR0_SHIFT); + ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + ret = regmap_write(tmdev->map, CNTL_ADDR, reg); + if (ret) + return ret; + + return 0; +} + +static void disable_8960(struct tsens_device *tmdev) +{ + int ret; + u32 reg_cntl; + u32 mask; + + mask = GENMASK(tmdev->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + ret = regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); + if (ret) + return; + + reg_cntl &= ~mask; + + if (tmdev->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); +} + +static int init_8960(struct tsens_device *tmdev) +{ + int ret, i; + u32 reg_cntl; + + tmdev->map = dev_get_regmap(tmdev->dev, NULL); + if (!tmdev->map) + return -ENODEV; + + /* + * The status registers for each sensor are discontiguous + * because some SoCs have 5 sensors while others have more + * but the control registers stay in the same place, i.e + * directly after the first 5 status registers. + */ + for (i = 0; i < tmdev->num_sensors; i++) { + if (i >= 5) + tmdev->sensor[i].status = S0_STATUS_ADDR + 40; + tmdev->sensor[i].status += i * 4; + } + + reg_cntl = SW_RST; + ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) { + reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); + reg_cntl &= ~SW_RST; + ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, + CONFIG_MASK, CONFIG); + } else { + reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); + reg_cntl &= ~CONFIG_MASK_8660; + reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660; + } + + reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; + ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + reg_cntl |= EN; + ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + return 0; +} + +static int calibrate_8960(struct tsens_device *tmdev) +{ + int i; + char *data; + + ssize_t num_read = tmdev->num_sensors; + struct tsens_sensor *s = tmdev->sensor; + + data = qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(tmdev->dev, "calib_backup"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < num_read; i++, s++) + s->offset = data[i]; + + return 0; +} + +/* Temperature on y axis and ADC-code on x-axis */ +static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s) +{ + int slope, offset; + + slope = thermal_zone_get_slope(s->tzd); + offset = CAL_MDEGC - slope * s->offset; + + return adc_code * slope + offset; +} + +static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp) +{ + int ret; + u32 code, trdy; + const struct tsens_sensor *s = &tmdev->sensor[id]; + unsigned long timeout; + + timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); + do { + ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); + if (ret) + return ret; + if (!(trdy & TRDY_MASK)) + continue; + ret = regmap_read(tmdev->map, s->status, &code); + if (ret) + return ret; + *temp = code_to_mdegC(code, s); + return 0; + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +static const struct tsens_ops ops_8960 = { + .init = init_8960, + .calibrate = calibrate_8960, + .get_temp = get_temp_8960, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; + +const struct tsens_data data_8960 = { + .num_sensors = 11, + .ops = &ops_8960, +}; |