diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/tty/serial/8250/8250_exar.c | 754 |
1 files changed, 754 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c new file mode 100644 index 000000000..195f58c5b --- /dev/null +++ b/drivers/tty/serial/8250/8250_exar.c @@ -0,0 +1,754 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Probe module for 8250/16550-type Exar chips PCI serial ports. + * + * Based on drivers/tty/serial/8250/8250_pci.c, + * + * Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved. + */ +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/property.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/tty.h> +#include <linux/8250_pci.h> + +#include <asm/byteorder.h> + +#include "8250.h" + +#define PCI_DEVICE_ID_ACCES_COM_2S 0x1052 +#define PCI_DEVICE_ID_ACCES_COM_4S 0x105d +#define PCI_DEVICE_ID_ACCES_COM_8S 0x106c +#define PCI_DEVICE_ID_ACCES_COM232_8 0x10a8 +#define PCI_DEVICE_ID_ACCES_COM_2SM 0x10d2 +#define PCI_DEVICE_ID_ACCES_COM_4SM 0x10db +#define PCI_DEVICE_ID_ACCES_COM_8SM 0x10ea + +#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 +#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 +#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a +#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b +#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 +#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358 +#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 + +#define UART_EXAR_INT0 0x80 +#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ + +#define UART_EXAR_FCTR 0x08 /* Feature Control Register */ +#define UART_FCTR_EXAR_IRDA 0x10 /* IrDa data encode select */ +#define UART_FCTR_EXAR_485 0x20 /* Auto 485 half duplex dir ctl */ +#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ +#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ +#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ +#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ + +#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ +#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ + +#define UART_EXAR_MPIOINT_7_0 0x8f /* MPIOINT[7:0] */ +#define UART_EXAR_MPIOLVL_7_0 0x90 /* MPIOLVL[7:0] */ +#define UART_EXAR_MPIO3T_7_0 0x91 /* MPIO3T[7:0] */ +#define UART_EXAR_MPIOINV_7_0 0x92 /* MPIOINV[7:0] */ +#define UART_EXAR_MPIOSEL_7_0 0x93 /* MPIOSEL[7:0] */ +#define UART_EXAR_MPIOOD_7_0 0x94 /* MPIOOD[7:0] */ +#define UART_EXAR_MPIOINT_15_8 0x95 /* MPIOINT[15:8] */ +#define UART_EXAR_MPIOLVL_15_8 0x96 /* MPIOLVL[15:8] */ +#define UART_EXAR_MPIO3T_15_8 0x97 /* MPIO3T[15:8] */ +#define UART_EXAR_MPIOINV_15_8 0x98 /* MPIOINV[15:8] */ +#define UART_EXAR_MPIOSEL_15_8 0x99 /* MPIOSEL[15:8] */ +#define UART_EXAR_MPIOOD_15_8 0x9a /* MPIOOD[15:8] */ + +#define UART_EXAR_RS485_DLY(x) ((x) << 4) + +/* + * IOT2040 MPIO wiring semantics: + * + * MPIO Port Function + * ---- ---- -------- + * 0 2 Mode bit 0 + * 1 2 Mode bit 1 + * 2 2 Terminate bus + * 3 - <reserved> + * 4 3 Mode bit 0 + * 5 3 Mode bit 1 + * 6 3 Terminate bus + * 7 - <reserved> + * 8 2 Enable + * 9 3 Enable + * 10 - Red LED + * 11..15 - <unused> + */ + +/* IOT2040 MPIOs 0..7 */ +#define IOT2040_UART_MODE_RS232 0x01 +#define IOT2040_UART_MODE_RS485 0x02 +#define IOT2040_UART_MODE_RS422 0x03 +#define IOT2040_UART_TERMINATE_BUS 0x04 + +#define IOT2040_UART1_MASK 0x0f +#define IOT2040_UART2_SHIFT 4 + +#define IOT2040_UARTS_DEFAULT_MODE 0x11 /* both RS232 */ +#define IOT2040_UARTS_GPIO_LO_MODE 0x88 /* reserved pins as input */ + +/* IOT2040 MPIOs 8..15 */ +#define IOT2040_UARTS_ENABLE 0x03 +#define IOT2040_UARTS_GPIO_HI_MODE 0xF8 /* enable & LED as outputs */ + +struct exar8250; + +struct exar8250_platform { + int (*rs485_config)(struct uart_port *, struct serial_rs485 *); + int (*register_gpio)(struct pci_dev *, struct uart_8250_port *); +}; + +/** + * struct exar8250_board - board information + * @num_ports: number of serial ports + * @reg_shift: describes UART register mapping in PCI memory + * @setup: quirk run at ->probe() stage + * @exit: quirk run at ->remove() stage + */ +struct exar8250_board { + unsigned int num_ports; + unsigned int reg_shift; + int (*setup)(struct exar8250 *, struct pci_dev *, + struct uart_8250_port *, int); + void (*exit)(struct pci_dev *pcidev); +}; + +struct exar8250 { + unsigned int nr; + struct exar8250_board *board; + void __iomem *virt; + int line[0]; +}; + +static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev, + int idx, unsigned int offset, + struct uart_8250_port *port) +{ + const struct exar8250_board *board = priv->board; + unsigned int bar = 0; + + port->port.iotype = UPIO_MEM; + port->port.mapbase = pci_resource_start(pcidev, bar) + offset; + port->port.membase = priv->virt + offset; + port->port.regshift = board->reg_shift; + + return 0; +} + +static int +pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = idx * 0x200; + unsigned int baud = 1843200; + u8 __iomem *p; + int err; + + port->port.uartclk = baud * 16; + + err = default_setup(priv, pcidev, idx, offset, port); + if (err) + return err; + + p = port->port.membase; + + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(32, p + UART_EXAR_TXTRG); + writeb(32, p + UART_EXAR_RXTRG); + + /* + * Setup Multipurpose Input/Output pins. + */ + if (idx == 0) { + switch (pcidev->device) { + case PCI_DEVICE_ID_COMMTECH_4222PCI335: + case PCI_DEVICE_ID_COMMTECH_4224PCI335: + writeb(0x78, p + UART_EXAR_MPIOLVL_7_0); + writeb(0x00, p + UART_EXAR_MPIOINV_7_0); + writeb(0x00, p + UART_EXAR_MPIOSEL_7_0); + break; + case PCI_DEVICE_ID_COMMTECH_2324PCI335: + case PCI_DEVICE_ID_COMMTECH_2328PCI335: + writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); + writeb(0xc0, p + UART_EXAR_MPIOINV_7_0); + writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0); + break; + } + writeb(0x00, p + UART_EXAR_MPIOINT_7_0); + writeb(0x00, p + UART_EXAR_MPIO3T_7_0); + writeb(0x00, p + UART_EXAR_MPIOOD_7_0); + } + + return 0; +} + +static int +pci_connect_tech_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = idx * 0x200; + unsigned int baud = 1843200; + + port->port.uartclk = baud * 16; + return default_setup(priv, pcidev, idx, offset, port); +} + +static int +pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = idx * 0x200; + unsigned int baud = 921600; + + port->port.uartclk = baud * 16; + return default_setup(priv, pcidev, idx, offset, port); +} + +static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) +{ + /* + * The Commtech adapters required the MPIOs to be driven low. The Exar + * devices will export them as GPIOs, so we pre-configure them safely + * as inputs. + */ + + u8 dir = 0x00; + + if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) && + (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) { + // Configure GPIO as inputs for Commtech adapters + dir = 0xff; + } else { + // Configure GPIO as outputs for SeaLevel adapters + dir = 0x00; + } + + writeb(0x00, p + UART_EXAR_MPIOINT_7_0); + writeb(0x00, p + UART_EXAR_MPIOLVL_7_0); + writeb(0x00, p + UART_EXAR_MPIO3T_7_0); + writeb(0x00, p + UART_EXAR_MPIOINV_7_0); + writeb(dir, p + UART_EXAR_MPIOSEL_7_0); + writeb(0x00, p + UART_EXAR_MPIOOD_7_0); + writeb(0x00, p + UART_EXAR_MPIOINT_15_8); + writeb(0x00, p + UART_EXAR_MPIOLVL_15_8); + writeb(0x00, p + UART_EXAR_MPIO3T_15_8); + writeb(0x00, p + UART_EXAR_MPIOINV_15_8); + writeb(dir, p + UART_EXAR_MPIOSEL_15_8); + writeb(0x00, p + UART_EXAR_MPIOOD_15_8); +} + +static void * +__xr17v35x_register_gpio(struct pci_dev *pcidev, + const struct property_entry *properties) +{ + struct platform_device *pdev; + + pdev = platform_device_alloc("gpio_exar", PLATFORM_DEVID_AUTO); + if (!pdev) + return NULL; + + pdev->dev.parent = &pcidev->dev; + ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pcidev->dev)); + + if (platform_device_add_properties(pdev, properties) < 0 || + platform_device_add(pdev) < 0) { + platform_device_put(pdev); + return NULL; + } + + return pdev; +} + +static const struct property_entry exar_gpio_properties[] = { + PROPERTY_ENTRY_U32("exar,first-pin", 0), + PROPERTY_ENTRY_U32("ngpios", 16), + { } +}; + +static int xr17v35x_register_gpio(struct pci_dev *pcidev, + struct uart_8250_port *port) +{ + if (pcidev->vendor == PCI_VENDOR_ID_EXAR) + port->port.private_data = + __xr17v35x_register_gpio(pcidev, exar_gpio_properties); + + return 0; +} + +static int generic_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); + u8 __iomem *p = port->membase; + u8 value; + + value = readb(p + UART_EXAR_FCTR); + if (is_rs485) + value |= UART_FCTR_EXAR_485; + else + value &= ~UART_FCTR_EXAR_485; + + writeb(value, p + UART_EXAR_FCTR); + + if (is_rs485) + writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR); + + port->rs485 = *rs485; + + return 0; +} + +static const struct exar8250_platform exar8250_default_platform = { + .register_gpio = xr17v35x_register_gpio, + .rs485_config = generic_rs485_config, +}; + +static int iot2040_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); + u8 __iomem *p = port->membase; + u8 mask = IOT2040_UART1_MASK; + u8 mode, value; + + if (is_rs485) { + if (rs485->flags & SER_RS485_RX_DURING_TX) + mode = IOT2040_UART_MODE_RS422; + else + mode = IOT2040_UART_MODE_RS485; + + if (rs485->flags & SER_RS485_TERMINATE_BUS) + mode |= IOT2040_UART_TERMINATE_BUS; + } else { + mode = IOT2040_UART_MODE_RS232; + } + + if (port->line == 3) { + mask <<= IOT2040_UART2_SHIFT; + mode <<= IOT2040_UART2_SHIFT; + } + + value = readb(p + UART_EXAR_MPIOLVL_7_0); + value &= ~mask; + value |= mode; + writeb(value, p + UART_EXAR_MPIOLVL_7_0); + + return generic_rs485_config(port, rs485); +} + +static const struct property_entry iot2040_gpio_properties[] = { + PROPERTY_ENTRY_U32("exar,first-pin", 10), + PROPERTY_ENTRY_U32("ngpios", 1), + { } +}; + +static int iot2040_register_gpio(struct pci_dev *pcidev, + struct uart_8250_port *port) +{ + u8 __iomem *p = port->port.membase; + + writeb(IOT2040_UARTS_DEFAULT_MODE, p + UART_EXAR_MPIOLVL_7_0); + writeb(IOT2040_UARTS_GPIO_LO_MODE, p + UART_EXAR_MPIOSEL_7_0); + writeb(IOT2040_UARTS_ENABLE, p + UART_EXAR_MPIOLVL_15_8); + writeb(IOT2040_UARTS_GPIO_HI_MODE, p + UART_EXAR_MPIOSEL_15_8); + + port->port.private_data = + __xr17v35x_register_gpio(pcidev, iot2040_gpio_properties); + + return 0; +} + +static const struct exar8250_platform iot2040_platform = { + .rs485_config = iot2040_rs485_config, + .register_gpio = iot2040_register_gpio, +}; + +static const struct dmi_system_id exar_platforms[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, + "6ES7647-0AA00-1YA2"), + }, + .driver_data = (void *)&iot2040_platform, + }, + {} +}; + +static int +pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, + struct uart_8250_port *port, int idx) +{ + const struct exar8250_platform *platform; + const struct dmi_system_id *dmi_match; + unsigned int offset = idx * 0x400; + unsigned int baud = 7812500; + u8 __iomem *p; + int ret; + + dmi_match = dmi_first_match(exar_platforms); + if (dmi_match) + platform = dmi_match->driver_data; + else + platform = &exar8250_default_platform; + + port->port.uartclk = baud * 16; + port->port.rs485_config = platform->rs485_config; + + /* + * Setup the UART clock for the devices on expansion slot to + * half the clock speed of the main chip (which is 125MHz) + */ + if (idx >= 8) + port->port.uartclk /= 2; + + ret = default_setup(priv, pcidev, idx, offset, port); + if (ret) + return ret; + + p = port->port.membase; + + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(128, p + UART_EXAR_TXTRG); + writeb(128, p + UART_EXAR_RXTRG); + + if (idx == 0) { + /* Setup Multipurpose Input/Output pins. */ + setup_gpio(pcidev, p); + + ret = platform->register_gpio(pcidev, port); + } + + return ret; +} + +static void pci_xr17v35x_exit(struct pci_dev *pcidev) +{ + struct exar8250 *priv = pci_get_drvdata(pcidev); + struct uart_8250_port *port = serial8250_get_port(priv->line[0]); + struct platform_device *pdev = port->port.private_data; + + platform_device_unregister(pdev); + port->port.private_data = NULL; +} + +/* + * These Exar UARTs have an extra interrupt indicator that could fire for a + * few interrupts that are not presented/cleared through IIR. One of which is + * a wakeup interrupt when coming out of sleep. These interrupts are only + * cleared by reading global INT0 or INT1 registers as interrupts are + * associated with channel 0. The INT[3:0] registers _are_ accessible from each + * channel's address space, but for the sake of bus efficiency we register a + * dedicated handler at the PCI device level to handle them. + */ +static irqreturn_t exar_misc_handler(int irq, void *data) +{ + struct exar8250 *priv = data; + + /* Clear all PCI interrupts by reading INT0. No effect on IIR */ + readb(priv->virt + UART_EXAR_INT0); + + /* Clear INT0 for Expansion Interface slave ports, too */ + if (priv->board->num_ports > 8) + readb(priv->virt + 0x2000 + UART_EXAR_INT0); + + return IRQ_HANDLED; +} + +static int +exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) +{ + unsigned int nr_ports, i, bar = 0, maxnr; + struct exar8250_board *board; + struct uart_8250_port uart; + struct exar8250 *priv; + int rc; + + board = (struct exar8250_board *)ent->driver_data; + if (!board) + return -EINVAL; + + rc = pcim_enable_device(pcidev); + if (rc) + return rc; + + maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3); + + nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f; + + priv = devm_kzalloc(&pcidev->dev, sizeof(*priv) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->board = board; + priv->virt = pcim_iomap(pcidev, bar, 0); + if (!priv->virt) + return -ENOMEM; + + pci_set_master(pcidev); + + rc = pci_alloc_irq_vectors(pcidev, 1, 1, PCI_IRQ_ALL_TYPES); + if (rc < 0) + return rc; + + memset(&uart, 0, sizeof(uart)); + uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ + | UPF_EXAR_EFR; + uart.port.irq = pci_irq_vector(pcidev, 0); + uart.port.dev = &pcidev->dev; + + rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler, + IRQF_SHARED, "exar_uart", priv); + if (rc) + return rc; + + for (i = 0; i < nr_ports && i < maxnr; i++) { + rc = board->setup(priv, pcidev, &uart, i); + if (rc) { + dev_err(&pcidev->dev, "Failed to setup port %u\n", i); + break; + } + + dev_dbg(&pcidev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", + uart.port.iobase, uart.port.irq, uart.port.iotype); + + priv->line[i] = serial8250_register_8250_port(&uart); + if (priv->line[i] < 0) { + dev_err(&pcidev->dev, + "Couldn't register serial port %lx, irq %d, type %d, error %d\n", + uart.port.iobase, uart.port.irq, + uart.port.iotype, priv->line[i]); + break; + } + } + priv->nr = i; + pci_set_drvdata(pcidev, priv); + return 0; +} + +static void exar_pci_remove(struct pci_dev *pcidev) +{ + struct exar8250 *priv = pci_get_drvdata(pcidev); + unsigned int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + if (priv->board->exit) + priv->board->exit(pcidev); +} + +static int __maybe_unused exar_suspend(struct device *dev) +{ + struct pci_dev *pcidev = to_pci_dev(dev); + struct exar8250 *priv = pci_get_drvdata(pcidev); + unsigned int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); + + /* Ensure that every init quirk is properly torn down */ + if (priv->board->exit) + priv->board->exit(pcidev); + + return 0; +} + +static int __maybe_unused exar_resume(struct device *dev) +{ + struct pci_dev *pcidev = to_pci_dev(dev); + struct exar8250 *priv = pci_get_drvdata(pcidev); + unsigned int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); + +static const struct exar8250_board acces_com_2x = { + .num_ports = 2, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board acces_com_4x = { + .num_ports = 4, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board acces_com_8x = { + .num_ports = 8, + .setup = pci_xr17c154_setup, +}; + + +static const struct exar8250_board pbn_fastcom335_2 = { + .num_ports = 2, + .setup = pci_fastcom335_setup, +}; + +static const struct exar8250_board pbn_fastcom335_4 = { + .num_ports = 4, + .setup = pci_fastcom335_setup, +}; + +static const struct exar8250_board pbn_fastcom335_8 = { + .num_ports = 8, + .setup = pci_fastcom335_setup, +}; + +static const struct exar8250_board pbn_connect = { + .setup = pci_connect_tech_setup, +}; + +static const struct exar8250_board pbn_exar_ibm_saturn = { + .num_ports = 1, + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board pbn_exar_XR17C15x = { + .setup = pci_xr17c154_setup, +}; + +static const struct exar8250_board pbn_exar_XR17V35x = { + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_fastcom35x_2 = { + .num_ports = 2, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_fastcom35x_4 = { + .num_ports = 4, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_fastcom35x_8 = { + .num_ports = 8, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_exar_XR17V4358 = { + .num_ports = 12, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +static const struct exar8250_board pbn_exar_XR17V8358 = { + .num_ports = 16, + .setup = pci_xr17v35x_setup, + .exit = pci_xr17v35x_exit, +}; + +#define CONNECT_DEVICE(devid, sdevid, bd) { \ + PCI_DEVICE_SUB( \ + PCI_VENDOR_ID_EXAR, \ + PCI_DEVICE_ID_EXAR_##devid, \ + PCI_SUBVENDOR_ID_CONNECT_TECH, \ + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_##sdevid), 0, 0, \ + (kernel_ulong_t)&bd \ + } + +#define EXAR_DEVICE(vend, devid, bd) { \ + PCI_VDEVICE(vend, PCI_DEVICE_ID_##devid), (kernel_ulong_t)&bd \ + } + +#define IBM_DEVICE(devid, sdevid, bd) { \ + PCI_DEVICE_SUB( \ + PCI_VENDOR_ID_EXAR, \ + PCI_DEVICE_ID_EXAR_##devid, \ + PCI_VENDOR_ID_IBM, \ + PCI_SUBDEVICE_ID_IBM_##sdevid), 0, 0, \ + (kernel_ulong_t)&bd \ + } + +static const struct pci_device_id exar_pci_tbl[] = { + EXAR_DEVICE(ACCESSIO, ACCES_COM_2S, acces_com_2x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_4S, acces_com_4x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_8S, acces_com_8x), + EXAR_DEVICE(ACCESSIO, ACCES_COM232_8, acces_com_8x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_2SM, acces_com_2x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_4SM, acces_com_4x), + EXAR_DEVICE(ACCESSIO, ACCES_COM_8SM, acces_com_8x), + + + CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect), + CONNECT_DEVICE(XR17C152, UART_1_1, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_2_2, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_4_4, pbn_connect), + CONNECT_DEVICE(XR17C152, UART_2, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_4, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_8, pbn_connect), + CONNECT_DEVICE(XR17C152, UART_2_485, pbn_connect), + CONNECT_DEVICE(XR17C154, UART_4_485, pbn_connect), + CONNECT_DEVICE(XR17C158, UART_8_485, pbn_connect), + + IBM_DEVICE(XR17C152, SATURN_SERIAL_ONE_PORT, pbn_exar_ibm_saturn), + + /* Exar Corp. XR17C15[248] Dual/Quad/Octal UART */ + EXAR_DEVICE(EXAR, EXAR_XR17C152, pbn_exar_XR17C15x), + EXAR_DEVICE(EXAR, EXAR_XR17C154, pbn_exar_XR17C15x), + EXAR_DEVICE(EXAR, EXAR_XR17C158, pbn_exar_XR17C15x), + + /* Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs */ + EXAR_DEVICE(EXAR, EXAR_XR17V352, pbn_exar_XR17V35x), + EXAR_DEVICE(EXAR, EXAR_XR17V354, pbn_exar_XR17V35x), + EXAR_DEVICE(EXAR, EXAR_XR17V358, pbn_exar_XR17V35x), + EXAR_DEVICE(EXAR, EXAR_XR17V4358, pbn_exar_XR17V4358), + EXAR_DEVICE(EXAR, EXAR_XR17V8358, pbn_exar_XR17V8358), + EXAR_DEVICE(COMMTECH, COMMTECH_4222PCIE, pbn_fastcom35x_2), + EXAR_DEVICE(COMMTECH, COMMTECH_4224PCIE, pbn_fastcom35x_4), + EXAR_DEVICE(COMMTECH, COMMTECH_4228PCIE, pbn_fastcom35x_8), + + EXAR_DEVICE(COMMTECH, COMMTECH_4222PCI335, pbn_fastcom335_2), + EXAR_DEVICE(COMMTECH, COMMTECH_4224PCI335, pbn_fastcom335_4), + EXAR_DEVICE(COMMTECH, COMMTECH_2324PCI335, pbn_fastcom335_4), + EXAR_DEVICE(COMMTECH, COMMTECH_2328PCI335, pbn_fastcom335_8), + { 0, } +}; +MODULE_DEVICE_TABLE(pci, exar_pci_tbl); + +static struct pci_driver exar_pci_driver = { + .name = "exar_serial", + .probe = exar_pci_probe, + .remove = exar_pci_remove, + .driver = { + .pm = &exar_pci_pm, + }, + .id_table = exar_pci_tbl, +}; +module_pci_driver(exar_pci_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Exar Serial Driver"); +MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>"); |