diff options
Diffstat (limited to 'drivers/watchdog/pnx4008_wdt.c')
| -rw-r--r-- | drivers/watchdog/pnx4008_wdt.c | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c new file mode 100644 index 000000000..8e261799c --- /dev/null +++ b/drivers/watchdog/pnx4008_wdt.c @@ -0,0 +1,272 @@ +/* + * drivers/char/watchdog/pnx4008_wdt.c + * + * Watchdog driver for PNX4008 board + * + * Authors: Dmitry Chigirev <source@mvista.com>, + * Vitaly Wool <vitalywool@gmail.com> + * Based on sa1100 driver, + * Copyright (C) 2000 Oleg Drokin <green@crimea.edu> + * + * 2005-2006 (c) MontaVista Software, Inc. + * + * (C) 2012 Wolfram Sang, Pengutronix + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <mach/hardware.h> + +/* WatchDog Timer - Chapter 23 Page 207 */ + +#define DEFAULT_HEARTBEAT 19 +#define MAX_HEARTBEAT 60 + +/* Watchdog timer register set definition */ +#define WDTIM_INT(p) ((p) + 0x0) +#define WDTIM_CTRL(p) ((p) + 0x4) +#define WDTIM_COUNTER(p) ((p) + 0x8) +#define WDTIM_MCTRL(p) ((p) + 0xC) +#define WDTIM_MATCH0(p) ((p) + 0x10) +#define WDTIM_EMR(p) ((p) + 0x14) +#define WDTIM_PULSE(p) ((p) + 0x18) +#define WDTIM_RES(p) ((p) + 0x1C) + +/* WDTIM_INT bit definitions */ +#define MATCH_INT 1 + +/* WDTIM_CTRL bit definitions */ +#define COUNT_ENAB 1 +#define RESET_COUNT (1 << 1) +#define DEBUG_EN (1 << 2) + +/* WDTIM_MCTRL bit definitions */ +#define MR0_INT 1 +#undef RESET_COUNT0 +#define RESET_COUNT0 (1 << 2) +#define STOP_COUNT0 (1 << 2) +#define M_RES1 (1 << 3) +#define M_RES2 (1 << 4) +#define RESFRC1 (1 << 5) +#define RESFRC2 (1 << 6) + +/* WDTIM_EMR bit definitions */ +#define EXT_MATCH0 1 +#define MATCH_OUTPUT_HIGH (2 << 4) /*a MATCH_CTRL setting */ + +/* WDTIM_RES bit definitions */ +#define WDOG_RESET 1 /* read only */ + +#define WDOG_COUNTER_RATE 13000000 /*the counter clock is 13 MHz fixed */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int heartbeat; + +static DEFINE_SPINLOCK(io_lock); +static void __iomem *wdt_base; +static struct clk *wdt_clk; + +static int pnx4008_wdt_start(struct watchdog_device *wdd) +{ + spin_lock(&io_lock); + + /* stop counter, initiate counter reset */ + writel(RESET_COUNT, WDTIM_CTRL(wdt_base)); + /*wait for reset to complete. 100% guarantee event */ + while (readl(WDTIM_COUNTER(wdt_base))) + cpu_relax(); + /* internal and external reset, stop after that */ + writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, WDTIM_MCTRL(wdt_base)); + /* configure match output */ + writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base)); + /* clear interrupt, just in case */ + writel(MATCH_INT, WDTIM_INT(wdt_base)); + /* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */ + writel(0xFFFF, WDTIM_PULSE(wdt_base)); + writel(wdd->timeout * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base)); + /*enable counter, stop when debugger active */ + writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base)); + + spin_unlock(&io_lock); + return 0; +} + +static int pnx4008_wdt_stop(struct watchdog_device *wdd) +{ + spin_lock(&io_lock); + + writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */ + + spin_unlock(&io_lock); + return 0; +} + +static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int new_timeout) +{ + wdd->timeout = new_timeout; + return 0; +} + +static int pnx4008_restart_handler(struct watchdog_device *wdd, + unsigned long mode, void *cmd) +{ + const char *boot_cmd = cmd; + + /* + * Verify if a "cmd" passed from the userspace program rebooting + * the system; if available, handle it. + * - For details, see the 'reboot' syscall in kernel/reboot.c + * - If the received "cmd" is not supported, use the default mode. + */ + if (boot_cmd) { + if (boot_cmd[0] == 'h') + mode = REBOOT_HARD; + else if (boot_cmd[0] == 's') + mode = REBOOT_SOFT; + } + + if (mode == REBOOT_SOFT) { + /* Force match output active */ + writel(EXT_MATCH0, WDTIM_EMR(wdt_base)); + /* Internal reset on match output (RESOUT_N not asserted) */ + writel(M_RES1, WDTIM_MCTRL(wdt_base)); + } else { + /* Instant assert of RESETOUT_N with pulse length 1mS */ + writel(13000, WDTIM_PULSE(wdt_base)); + writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base)); + } + + /* Wait for watchdog to reset system */ + mdelay(1000); + + return NOTIFY_DONE; +} + +static const struct watchdog_info pnx4008_wdt_ident = { + .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "PNX4008 Watchdog", +}; + +static const struct watchdog_ops pnx4008_wdt_ops = { + .owner = THIS_MODULE, + .start = pnx4008_wdt_start, + .stop = pnx4008_wdt_stop, + .set_timeout = pnx4008_wdt_set_timeout, + .restart = pnx4008_restart_handler, +}; + +static struct watchdog_device pnx4008_wdd = { + .info = &pnx4008_wdt_ident, + .ops = &pnx4008_wdt_ops, + .timeout = DEFAULT_HEARTBEAT, + .min_timeout = 1, + .max_timeout = MAX_HEARTBEAT, +}; + +static int pnx4008_wdt_probe(struct platform_device *pdev) +{ + struct resource *r; + int ret = 0; + + watchdog_init_timeout(&pnx4008_wdd, heartbeat, &pdev->dev); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(wdt_base)) + return PTR_ERR(wdt_base); + + wdt_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt_clk)) + return PTR_ERR(wdt_clk); + + ret = clk_prepare_enable(wdt_clk); + if (ret) + return ret; + + pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ? + WDIOF_CARDRESET : 0; + pnx4008_wdd.parent = &pdev->dev; + watchdog_set_nowayout(&pnx4008_wdd, nowayout); + watchdog_set_restart_priority(&pnx4008_wdd, 128); + + pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */ + + ret = watchdog_register_device(&pnx4008_wdd); + if (ret < 0) { + dev_err(&pdev->dev, "cannot register watchdog device\n"); + goto disable_clk; + } + + dev_info(&pdev->dev, "heartbeat %d sec\n", pnx4008_wdd.timeout); + + return 0; + +disable_clk: + clk_disable_unprepare(wdt_clk); + return ret; +} + +static int pnx4008_wdt_remove(struct platform_device *pdev) +{ + watchdog_unregister_device(&pnx4008_wdd); + + clk_disable_unprepare(wdt_clk); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id pnx4008_wdt_match[] = { + { .compatible = "nxp,pnx4008-wdt" }, + { } +}; +MODULE_DEVICE_TABLE(of, pnx4008_wdt_match); +#endif + +static struct platform_driver platform_wdt_driver = { + .driver = { + .name = "pnx4008-watchdog", + .of_match_table = of_match_ptr(pnx4008_wdt_match), + }, + .probe = pnx4008_wdt_probe, + .remove = pnx4008_wdt_remove, +}; + +module_platform_driver(platform_wdt_driver); + +MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); +MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>"); +MODULE_DESCRIPTION("PNX4008 Watchdog Driver"); + +module_param(heartbeat, uint, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat period in seconds from 1 to " + __MODULE_STRING(MAX_HEARTBEAT) ", default " + __MODULE_STRING(DEFAULT_HEARTBEAT)); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Set to 1 to keep watchdog running after device release"); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pnx4008-watchdog"); |