diff options
Diffstat (limited to '')
| -rw-r--r-- | include/drm/drm_print.h | 426 |
1 files changed, 426 insertions, 0 deletions
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h new file mode 100644 index 000000000..f3e6eed3e --- /dev/null +++ b/include/drm/drm_print.h @@ -0,0 +1,426 @@ +/* + * Copyright (C) 2016 Red Hat + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: + * Rob Clark <robdclark@gmail.com> + */ + +#ifndef DRM_PRINT_H_ +#define DRM_PRINT_H_ + +#include <linux/compiler.h> +#include <linux/printk.h> +#include <linux/seq_file.h> +#include <linux/device.h> + +/** + * DOC: print + * + * A simple wrapper for dev_printk(), seq_printf(), etc. Allows same + * debug code to be used for both debugfs and printk logging. + * + * For example:: + * + * void log_some_info(struct drm_printer *p) + * { + * drm_printf(p, "foo=%d\n", foo); + * drm_printf(p, "bar=%d\n", bar); + * } + * + * #ifdef CONFIG_DEBUG_FS + * void debugfs_show(struct seq_file *f) + * { + * struct drm_printer p = drm_seq_file_printer(f); + * log_some_info(&p); + * } + * #endif + * + * void some_other_function(...) + * { + * struct drm_printer p = drm_info_printer(drm->dev); + * log_some_info(&p); + * } + */ + +/** + * struct drm_printer - drm output "stream" + * + * Do not use struct members directly. Use drm_printer_seq_file(), + * drm_printer_info(), etc to initialize. And drm_printf() for output. + */ +struct drm_printer { + /* private: */ + void (*printfn)(struct drm_printer *p, struct va_format *vaf); + void (*puts)(struct drm_printer *p, const char *str); + void *arg; + const char *prefix; +}; + +void __drm_printfn_coredump(struct drm_printer *p, struct va_format *vaf); +void __drm_puts_coredump(struct drm_printer *p, const char *str); +void __drm_printfn_seq_file(struct drm_printer *p, struct va_format *vaf); +void __drm_puts_seq_file(struct drm_printer *p, const char *str); +void __drm_printfn_info(struct drm_printer *p, struct va_format *vaf); +void __drm_printfn_debug(struct drm_printer *p, struct va_format *vaf); + +__printf(2, 3) +void drm_printf(struct drm_printer *p, const char *f, ...); +void drm_puts(struct drm_printer *p, const char *str); + +__printf(2, 0) +/** + * drm_vprintf - print to a &drm_printer stream + * @p: the &drm_printer + * @fmt: format string + * @va: the va_list + */ +static inline void +drm_vprintf(struct drm_printer *p, const char *fmt, va_list *va) +{ + struct va_format vaf = { .fmt = fmt, .va = va }; + + p->printfn(p, &vaf); +} + +/** + * drm_printf_indent - Print to a &drm_printer stream with indentation + * @printer: DRM printer + * @indent: Tab indentation level (max 5) + * @fmt: Format string + */ +#define drm_printf_indent(printer, indent, fmt, ...) \ + drm_printf((printer), "%.*s" fmt, (indent), "\t\t\t\t\tX", ##__VA_ARGS__) + +/** + * struct drm_print_iterator - local struct used with drm_printer_coredump + * @data: Pointer to the devcoredump output buffer + * @start: The offset within the buffer to start writing + * @remain: The number of bytes to write for this iteration + */ +struct drm_print_iterator { + void *data; + ssize_t start; + ssize_t remain; + /* private: */ + ssize_t offset; +}; + +/** + * drm_coredump_printer - construct a &drm_printer that can output to a buffer + * from the read function for devcoredump + * @iter: A pointer to a struct drm_print_iterator for the read instance + * + * This wrapper extends drm_printf() to work with a dev_coredumpm() callback + * function. The passed in drm_print_iterator struct contains the buffer + * pointer, size and offset as passed in from devcoredump. + * + * For example:: + * + * void coredump_read(char *buffer, loff_t offset, size_t count, + * void *data, size_t datalen) + * { + * struct drm_print_iterator iter; + * struct drm_printer p; + * + * iter.data = buffer; + * iter.start = offset; + * iter.remain = count; + * + * p = drm_coredump_printer(&iter); + * + * drm_printf(p, "foo=%d\n", foo); + * } + * + * void makecoredump(...) + * { + * ... + * dev_coredumpm(dev, THIS_MODULE, data, 0, GFP_KERNEL, + * coredump_read, ...) + * } + * + * RETURNS: + * The &drm_printer object + */ +static inline struct drm_printer +drm_coredump_printer(struct drm_print_iterator *iter) +{ + struct drm_printer p = { + .printfn = __drm_printfn_coredump, + .puts = __drm_puts_coredump, + .arg = iter, + }; + + /* Set the internal offset of the iterator to zero */ + iter->offset = 0; + + return p; +} + +/** + * drm_seq_file_printer - construct a &drm_printer that outputs to &seq_file + * @f: the &struct seq_file to output to + * + * RETURNS: + * The &drm_printer object + */ +static inline struct drm_printer drm_seq_file_printer(struct seq_file *f) +{ + struct drm_printer p = { + .printfn = __drm_printfn_seq_file, + .puts = __drm_puts_seq_file, + .arg = f, + }; + return p; +} + +/** + * drm_info_printer - construct a &drm_printer that outputs to dev_printk() + * @dev: the &struct device pointer + * + * RETURNS: + * The &drm_printer object + */ +static inline struct drm_printer drm_info_printer(struct device *dev) +{ + struct drm_printer p = { + .printfn = __drm_printfn_info, + .arg = dev, + }; + return p; +} + +/** + * drm_debug_printer - construct a &drm_printer that outputs to pr_debug() + * @prefix: debug output prefix + * + * RETURNS: + * The &drm_printer object + */ +static inline struct drm_printer drm_debug_printer(const char *prefix) +{ + struct drm_printer p = { + .printfn = __drm_printfn_debug, + .prefix = prefix + }; + return p; +} + +/* + * The following categories are defined: + * + * CORE: Used in the generic drm code: drm_ioctl.c, drm_mm.c, drm_memory.c, ... + * This is the category used by the DRM_DEBUG() macro. + * + * DRIVER: Used in the vendor specific part of the driver: i915, radeon, ... + * This is the category used by the DRM_DEBUG_DRIVER() macro. + * + * KMS: used in the modesetting code. + * This is the category used by the DRM_DEBUG_KMS() macro. + * + * PRIME: used in the prime code. + * This is the category used by the DRM_DEBUG_PRIME() macro. + * + * ATOMIC: used in the atomic code. + * This is the category used by the DRM_DEBUG_ATOMIC() macro. + * + * VBL: used for verbose debug message in the vblank code + * This is the category used by the DRM_DEBUG_VBL() macro. + * + * Enabling verbose debug messages is done through the drm.debug parameter, + * each category being enabled by a bit. + * + * drm.debug=0x1 will enable CORE messages + * drm.debug=0x2 will enable DRIVER messages + * drm.debug=0x3 will enable CORE and DRIVER messages + * ... + * drm.debug=0x3f will enable all messages + * + * An interesting feature is that it's possible to enable verbose logging at + * run-time by echoing the debug value in its sysfs node: + * # echo 0xf > /sys/module/drm/parameters/debug + */ +#define DRM_UT_NONE 0x00 +#define DRM_UT_CORE 0x01 +#define DRM_UT_DRIVER 0x02 +#define DRM_UT_KMS 0x04 +#define DRM_UT_PRIME 0x08 +#define DRM_UT_ATOMIC 0x10 +#define DRM_UT_VBL 0x20 +#define DRM_UT_STATE 0x40 +#define DRM_UT_LEASE 0x80 +#define DRM_UT_DP 0x100 + +__printf(3, 4) +void drm_dev_printk(const struct device *dev, const char *level, + const char *format, ...); +__printf(3, 4) +void drm_dev_dbg(const struct device *dev, unsigned int category, + const char *format, ...); + +__printf(2, 3) +void drm_dbg(unsigned int category, const char *format, ...); +__printf(1, 2) +void drm_err(const char *format, ...); + +/* Macros to make printk easier */ + +#define _DRM_PRINTK(once, level, fmt, ...) \ + printk##once(KERN_##level "[" DRM_NAME "] " fmt, ##__VA_ARGS__) + +#define DRM_INFO(fmt, ...) \ + _DRM_PRINTK(, INFO, fmt, ##__VA_ARGS__) +#define DRM_NOTE(fmt, ...) \ + _DRM_PRINTK(, NOTICE, fmt, ##__VA_ARGS__) +#define DRM_WARN(fmt, ...) \ + _DRM_PRINTK(, WARNING, fmt, ##__VA_ARGS__) + +#define DRM_INFO_ONCE(fmt, ...) \ + _DRM_PRINTK(_once, INFO, fmt, ##__VA_ARGS__) +#define DRM_NOTE_ONCE(fmt, ...) \ + _DRM_PRINTK(_once, NOTICE, fmt, ##__VA_ARGS__) +#define DRM_WARN_ONCE(fmt, ...) \ + _DRM_PRINTK(_once, WARNING, fmt, ##__VA_ARGS__) + +/** + * Error output. + * + * @dev: device pointer + * @fmt: printf() like format string. + */ +#define DRM_DEV_ERROR(dev, fmt, ...) \ + drm_dev_printk(dev, KERN_ERR, "*ERROR* " fmt, ##__VA_ARGS__) +#define DRM_ERROR(fmt, ...) \ + drm_err(fmt, ##__VA_ARGS__) + +/** + * Rate limited error output. Like DRM_ERROR() but won't flood the log. + * + * @dev: device pointer + * @fmt: printf() like format string. + */ +#define DRM_DEV_ERROR_RATELIMITED(dev, fmt, ...) \ +({ \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + \ + if (__ratelimit(&_rs)) \ + DRM_DEV_ERROR(dev, fmt, ##__VA_ARGS__); \ +}) +#define DRM_ERROR_RATELIMITED(fmt, ...) \ + DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__) + +#define DRM_DEV_INFO(dev, fmt, ...) \ + drm_dev_printk(dev, KERN_INFO, fmt, ##__VA_ARGS__) + +#define DRM_DEV_INFO_ONCE(dev, fmt, ...) \ +({ \ + static bool __print_once __read_mostly; \ + if (!__print_once) { \ + __print_once = true; \ + DRM_DEV_INFO(dev, fmt, ##__VA_ARGS__); \ + } \ +}) + +/** + * Debug output. + * + * @dev: device pointer + * @fmt: printf() like format string. + */ +#define DRM_DEV_DEBUG(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__) +#define DRM_DEBUG(fmt, ...) \ + drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) +#define DRM_DEBUG_DRIVER(fmt, ...) \ + drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__) +#define DRM_DEBUG_KMS(fmt, ...) \ + drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_PRIME(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_PRIME, fmt, ##__VA_ARGS__) +#define DRM_DEBUG_PRIME(fmt, ...) \ + drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_ATOMIC(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__) +#define DRM_DEBUG_ATOMIC(fmt, ...) \ + drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_VBL(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_VBL, fmt, ##__VA_ARGS__) +#define DRM_DEBUG_VBL(fmt, ...) \ + drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__) + +#define DRM_DEBUG_LEASE(fmt, ...) \ + drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_DP(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_DP, fmt, ## __VA_ARGS__) +#define DRM_DEBUG_DP(dev, fmt, ...) \ + drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__) + +#define _DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, category, fmt, ...) \ +({ \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + if (__ratelimit(&_rs)) \ + drm_dev_dbg(dev, category, fmt, ##__VA_ARGS__); \ +}) + +/** + * Rate limited debug output. Like DRM_DEBUG() but won't flood the log. + * + * @dev: device pointer + * @fmt: printf() like format string. + */ +#define DRM_DEV_DEBUG_RATELIMITED(dev, fmt, ...) \ + _DEV_DRM_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_CORE, \ + fmt, ##__VA_ARGS__) +#define DRM_DEBUG_RATELIMITED(fmt, ...) \ + DRM_DEV_DEBUG_RATELIMITED(NULL, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_DRIVER_RATELIMITED(dev, fmt, ...) \ + _DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_DRIVER, \ + fmt, ##__VA_ARGS__) +#define DRM_DEBUG_DRIVER_RATELIMITED(fmt, ...) \ + DRM_DEV_DEBUG_DRIVER_RATELIMITED(NULL, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_KMS_RATELIMITED(dev, fmt, ...) \ + _DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_KMS, \ + fmt, ##__VA_ARGS__) +#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...) \ + DRM_DEV_DEBUG_KMS_RATELIMITED(NULL, fmt, ##__VA_ARGS__) + +#define DRM_DEV_DEBUG_PRIME_RATELIMITED(dev, fmt, ...) \ + _DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_PRIME, \ + fmt, ##__VA_ARGS__) +#define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...) \ + DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__) + +#endif /* DRM_PRINT_H_ */ |